@volcengine/pulumi-volcenginecc 0.0.28 → 0.0.30

package/storageebs/getSnapshot.d.ts

@@ -18,11 +18,11 @@ export interface GetSnapshotArgs {
  */
 export interface GetSnapshotResult {
     /**
-     * 快照创建时间。
+     * Snapshot creation time.
      */
     readonly creationTime: string;
     /**
-     * 快照描述信息，默认为空，长度限制为0~255个字符。
+     * Snapshot description. Default is empty. Length must be between 0 and 255 characters.
      */
     readonly description: string;
     /**
@@ -30,79 +30,79 @@ export interface GetSnapshotResult {
      */
     readonly id: string;
     /**
-     * 镜像ID
+     * Image ID
      */
     readonly imageId: string;
     /**
-     * 快照是否开启极速可用能力，取值说明如下：true：已开启极速可用能力。false：未开启极速可用能力。
+     * Whether the snapshot has enabled ultra-fast availability. Value options: true: ultra-fast availability enabled. false: ultra-fast availability not enabled.
      */
     readonly instantAccess: boolean;
     /**
-     * 快照转储进度。
+     * Snapshot dump progress.
      */
     readonly progress: number;
     /**
-     * 快照所要加入的Project（项目）名称。注意快照不会继承云盘的项目，即快照与云盘可以所属不同的项目。如果您在创建快照时未设置ProjectName，快照会默认加入default项目。
+     * Name of the Project to which the snapshot will be added. Note: snapshots do not inherit the project of the cloud disk, so snapshots and cloud disks can belong to different projects. If you do not set ProjectName when creating the snapshot, it will be added to the default project.
      */
     readonly projectName: string;
     /**
-     * 快照保留时间，单位为天，取值说明如下：空：永久保留快照 。1~65536：指定保存天数。默认为空，即默认永久保留快照。说明快照保留时间从快照创建时刻开始计算。
+     * Snapshot retention period, in days. Value options: empty: retain snapshot permanently. 1~65536: specify retention days. Default is empty, which means retain snapshot permanently. Snapshot retention period is calculated from the snapshot creation time.
      */
     readonly retentionDays: number;
     /**
-     * 快照是否共享。
+     * Whether the snapshot is shared.
      */
     readonly shared: boolean;
     /**
-     * 快照一致性组ID。
+     * Snapshot consistency group ID.
      */
     readonly snapshotGroupId: string;
     /**
-     * 快照ID。
+     * Snapshot ID.
      */
     readonly snapshotId: string;
     /**
-     * 创建的快照名称。命名规范如下：长度限制为1~128个字符。只能包含中文、字母、数字、下划线（_）、中划线（-）和英文句号（.）。为防止和自动快照的名称冲突，不能以“auto”开头。
+     * Name of the created snapshot. Naming rules: length must be between 1 and 128 characters. Only Chinese characters, letters, numbers, underscores (_), hyphens (-), and periods (.) are allowed. To avoid conflicts with automatic snapshot names, the name cannot start with 'auto'.
      */
     readonly snapshotName: string;
     /**
-     * 快照类型，取值说明如下：user：查询手动快照。auto：查询自动快照。share：查询共享快照。默认查询所有快照。
+     * Snapshot type. The available values are: user: query manual snapshots. auto: query automatic snapshots. share: query shared snapshots. By default, all snapshots are queried.
      */
     readonly snapshotType: string;
     /**
-     * 快照状态，取值说明如下：available：可用。creating：创建中。rollbacking：回滚中。deleted：已删除。failed：错误。
+     * Snapshot status. Value options: available: available. creating: creating. rollbacking: rolling back. deleted: deleted. failed: error.
      */
     readonly status: string;
     /**
-     * 快照的标签信息。
+     * Snapshot tag information.
      */
     readonly tags: outputs.storageebs.GetSnapshotTag[];
     /**
-     * 快照相关的云盘ID。
+     * Cloud disk ID associated with the snapshot.
      */
     readonly volumeId: string;
     /**
-     * 云盘种类，取值说明如下：system：系统盘。data：数据盘。
+     * Cloud disk category. Value options: system: system disk. data: data disk.
      */
     readonly volumeKind: string;
     /**
-     * 云盘名称。
+     * Cloud disk name.
      */
     readonly volumeName: string;
     /**
-     * 云盘大小，单位为GiB。
+     * Cloud disk size, in GiB.
      */
     readonly volumeSize: number;
     /**
-     * 云盘状态，取值说明如下：available：可用, attaching：挂载中, attached：已挂载, detaching：卸载中, creating：创建中, deleting：删除中, error：错误, extending：扩容中, ""：云盘被删除。
+     * Cloud disk status. Value options: available: available, attaching: attaching, attached: attached, detaching: detaching, creating: creating, deleting: deleting, error: error, extending: expanding, "": cloud disk deleted.
      */
     readonly volumeStatus: string;
     /**
-     * 云盘类型，取值说明如下：ESSD*PL0：极速型SSD云盘，PL0规格。ESSD*FlexPL：极速型SSD云盘，FlexPL规格。TSSD_TL0：吞吐型SSD云盘
+     * Cloud disk type. Value options: ESSD*PL0: Ultra-fast SSD cloud disk, PL0 specification. ESSD*FlexPL: Ultra-fast SSD cloud disk, FlexPL specification. TSSD_TL0: Throughput SSD cloud disk
      */
     readonly volumeType: string;
     /**
-     * 快照所在的可用区ID。
+     * Availability zone ID where the snapshot is located.
      */
     readonly zoneId: string;
 }

package/storageebs/getVolume.d.ts

@@ -18,43 +18,43 @@ export interface GetVolumeArgs {
  */
 export interface GetVolumeResult {
     /**
-     * 自动快照策略ID。
+     * Automatic snapshot policy ID.
      */
     readonly autoSnapshotPolicyId: string;
     /**
-     * 自动快照策略名称。
+     * Automatic snapshot policy name.
      */
     readonly autoSnapshotPolicyName: string;
     /**
-     * 基本性能。
+     * Baseline performance.
      */
     readonly baselinePerformance: outputs.storageebs.GetVolumeBaselinePerformance;
     /**
-     * 云盘创建时间。
+     * Disk creation time.
      */
     readonly createdAt: string;
     /**
-     * 释放实例时，该云盘是否随实例一起释放，取值说明如下：true：云盘随实例一起释放。false：云盘不随实例一起释放。
+     * When releasing the instance, specify whether the disk is released along with the instance. Value description: true: The disk is released with the instance. false: The disk is not released with the instance.
      */
     readonly deleteWithInstance: boolean;
     /**
-     * 云盘的描述信息，默认为空，长度限制在1 ~ 255字符之间。
+     * Disk description. Default is empty. Length must be between 1 and 255 characters.
      */
     readonly description: string;
     /**
-     * 设备名称
+     * Device name
      */
     readonly deviceName: string;
     /**
-     * 具体错误
+     * Specific error
      */
     readonly errorDetail: string;
     /**
-     * 包年包月到期时间。
+     * Expiration time for yearly/monthly subscription.
      */
     readonly expiredTime: string;
     /**
-     * 额外性能。
+     * Extra performance.
      */
     readonly extraPerformance: outputs.storageebs.GetVolumeExtraPerformance;
     /**
@@ -62,83 +62,83 @@ export interface GetVolumeResult {
      */
     readonly id: string;
     /**
-     * 云盘中的镜像ID。
+     * Image ID in the disk.
      */
     readonly imageId: string;
     /**
-     * 创建云盘的同时挂载的ECS实例ID。
+     * ECS instance ID mounted when creating the cloud disk.
      */
     readonly instanceId: string;
     /**
-     * 云盘属性，data表示数据盘。默认值为data。说明： 仅支持创建数据盘。
+     * Disk attribute. data indicates a data disk. The default value is data. Note: Only data disks can be created.
      */
     readonly kind: string;
     /**
-     * 云盘欠费回收时间。
+     * Disk overdue reclamation time.
      */
     readonly overdueReclaimTime: string;
     /**
-     * 云盘欠费关停时间。
+     * Disk overdue shutdown time.
      */
     readonly overdueTime: string;
     /**
-     * 付费类型，说明如下： Pre：预付费（包年包月） Post：后付费（按量计费）。
+     * Payment type. Description: Pre: Prepaid (annual/monthly). Post: Postpaid (pay-as-you-go).
      */
     readonly payType: string;
     /**
-     * 云盘所要加入的Project（项目）名称。
+     * Project name to which the disk will be added.
      */
     readonly projectName: string;
     /**
-     * 续费方式 1：手动续费 2 ：自动续费 3 ：到期不续费。
+     * Renewal method 1: Manual renewal 2: Automatic renewal 3: Do not renew upon expiration.
      */
     readonly renewType: number;
     /**
-     * Size，数据盘容量大小，单位为GiB。不同类型的数据盘容量范围如下：ESSD*PL0：10~65536 GiB；ESSD*FlexPL：10~65536 GiB；TSSD_TL0：40~65536 GiB
+     * Size: data disk capacity in GiB. The capacity ranges for different types of data disks are as follows: ESSD*PL0: 10~65536 GiB; ESSD*FlexPL: 10~65536 GiB; TSSD_TL0: 40~65536 GiB
      */
     readonly size: number;
     /**
-     * 快照计数
+     * Snapshot count.
      */
     readonly snapshotCount: number;
     /**
-     * 源快照。
+     * Source snapshot.
      */
     readonly sourceSnapshotId: string;
     /**
-     * 云盘状态，取值说明如下：available：可用。attaching：挂载中。attached：已挂载。detaching：卸载中。creating：创建中。deleting：删除中。error：错误。extending：扩容中。
+     * Disk status. Value description: available: Available. mounting: Mounting. mounted: Mounted. unmounting: Unmounting. creating: Creating. deleting: Deleting. error: Error. expanding: Expanding.
      */
     readonly status: string;
     /**
-     * 云盘的标签信息
+     * Disk tag information.
      */
     readonly tags: outputs.storageebs.GetVolumeTag[];
     /**
-     * 总性能。
+     * Total performance.
      */
     readonly totalPerformance: outputs.storageebs.GetVolumeTotalPerformance;
     /**
-     * 交易状态 0：创建中 1：运行中 2：创建失败
+     * Transaction status 0: Creating 1: Running 2: Creation failed
      */
     readonly tradeStatus: number;
     /**
-     * 云盘更新时间。
+     * Disk update time.
      */
     readonly updatedAt: string;
     /**
-     * 云盘id。
+     * Disk ID.
      */
     readonly volumeId: string;
     /**
-     * 云盘显示名称。命名规则如下：首字符仅支持中文、字母或下划线（*）。可包含中文、字母、数字、下划线（*）或中划线（-）。长度限制在1~128字符之间。
+     * Disk display name. Naming rules: The first character must be a Chinese character, a letter, or an underscore (*). Can contain Chinese characters, letters, numbers, underscores (*), or hyphens (-). Length must be between 1 and 128 characters.
      */
     readonly volumeName: string;
     /**
-     * 云盘类型，取值说明如下：ESSD*PL0：极速型SSD云盘，PL0规格。ESSD*FlexPL: 极速型SSD云盘，FlexPL规格。TSSD_TL0: 吞吐型SSD云盘。
+     * Disk type. Value description: ESSD*PL0: Ultra-fast SSD disk, PL0 specification. ESSD*FlexPL: Ultra-fast SSD disk, FlexPL specification. TSSD_TL0: Throughput SSD disk.
      */
     readonly volumeType: string;
     /**
-     * 可用区ID。
+     * Availability zone ID.
      */
     readonly zoneId: string;
 }

package/storageebs/snapshot.d.ts

@@ -2,7 +2,7 @@ import * as pulumi from "@pulumi/pulumi";
 import * as inputs from "../types/input";
 import * as outputs from "../types/output";
 /**
- * 快照是一种备份方式，每个快照都是云盘数据在某个时间点的备份文件。当数据丢失或故障时，您可以通过快照回滚云盘数据，找回丢失的数据。
+ * A snapshot is a backup method. Each snapshot is a backup file of cloud disk data at a specific point in time. When data is lost or a failure occurs, you can roll back cloud disk data using the snapshot to recover lost data.
  *
  * ## Example Usage
  *
@@ -45,84 +45,84 @@ export declare class Snapshot extends pulumi.CustomResource {
      */
     static isInstance(obj: any): obj is Snapshot;
     /**
-     * 快照创建时间。
+     * Snapshot creation time.
      */
     readonly creationTime: pulumi.Output<string>;
     /**
-     * 快照描述信息，默认为空，长度限制为0~255个字符。
+     * Snapshot description. Default is empty. Length must be between 0 and 255 characters.
      */
     readonly description: pulumi.Output<string>;
     /**
-     * 镜像ID
+     * Image ID
      */
     readonly imageId: pulumi.Output<string>;
     /**
-     * 快照是否开启极速可用能力，取值说明如下：true：已开启极速可用能力。false：未开启极速可用能力。
+     * Whether the snapshot has enabled ultra-fast availability. Value options: true: ultra-fast availability enabled. false: ultra-fast availability not enabled.
      */
     readonly instantAccess: pulumi.Output<boolean>;
     /**
-     * 快照转储进度。
+     * Snapshot dump progress.
      */
     readonly progress: pulumi.Output<number>;
     /**
-     * 快照所要加入的Project（项目）名称。注意快照不会继承云盘的项目，即快照与云盘可以所属不同的项目。如果您在创建快照时未设置ProjectName，快照会默认加入default项目。
+     * Name of the Project to which the snapshot will be added. Note: snapshots do not inherit the project of the cloud disk, so snapshots and cloud disks can belong to different projects. If you do not set ProjectName when creating the snapshot, it will be added to the default project.
      */
     readonly projectName: pulumi.Output<string>;
     /**
-     * 快照保留时间，单位为天，取值说明如下：空：永久保留快照 。1~65536：指定保存天数。默认为空，即默认永久保留快照。说明快照保留时间从快照创建时刻开始计算。
+     * Snapshot retention period, in days. Value options: empty: retain snapshot permanently. 1~65536: specify retention days. Default is empty, which means retain snapshot permanently. Snapshot retention period is calculated from the snapshot creation time.
      */
     readonly retentionDays: pulumi.Output<number>;
     /**
-     * 快照是否共享。
+     * Whether the snapshot is shared.
      */
     readonly shared: pulumi.Output<boolean>;
     /**
-     * 快照一致性组ID。
+     * Snapshot consistency group ID.
      */
     readonly snapshotGroupId: pulumi.Output<string>;
     /**
-     * 快照ID。
+     * Snapshot ID.
      */
     readonly snapshotId: pulumi.Output<string>;
     /**
-     * 创建的快照名称。命名规范如下：长度限制为1~128个字符。只能包含中文、字母、数字、下划线（_）、中划线（-）和英文句号（.）。为防止和自动快照的名称冲突，不能以“auto”开头。
+     * Name of the created snapshot. Naming rules: length must be between 1 and 128 characters. Only Chinese characters, letters, numbers, underscores (_), hyphens (-), and periods (.) are allowed. To avoid conflicts with automatic snapshot names, the name cannot start with 'auto'.
      */
     readonly snapshotName: pulumi.Output<string>;
     /**
-     * 快照类型，取值说明如下：user：查询手动快照。auto：查询自动快照。share：查询共享快照。默认查询所有快照。
+     * Snapshot type. The available values are: user: query manual snapshots. auto: query automatic snapshots. share: query shared snapshots. By default, all snapshots are queried.
      */
     readonly snapshotType: pulumi.Output<string>;
     /**
-     * 快照状态，取值说明如下：available：可用。creating：创建中。rollbacking：回滚中。deleted：已删除。failed：错误。
+     * Snapshot status. Value options: available: available. creating: creating. rollbacking: rolling back. deleted: deleted. failed: error.
      */
     readonly status: pulumi.Output<string>;
     readonly tags: pulumi.Output<outputs.storageebs.SnapshotTag[]>;
     /**
-     * 快照相关的云盘ID。
+     * Cloud disk ID associated with the snapshot.
      */
     readonly volumeId: pulumi.Output<string>;
     /**
-     * 云盘种类，取值说明如下：system：系统盘。data：数据盘。
+     * Cloud disk category. Value options: system: system disk. data: data disk.
      */
     readonly volumeKind: pulumi.Output<string>;
     /**
-     * 云盘名称。
+     * Cloud disk name.
      */
     readonly volumeName: pulumi.Output<string>;
     /**
-     * 云盘大小，单位为GiB。
+     * Cloud disk size, in GiB.
      */
     readonly volumeSize: pulumi.Output<number>;
     /**
-     * 云盘状态，取值说明如下：available：可用, attaching：挂载中, attached：已挂载, detaching：卸载中, creating：创建中, deleting：删除中, error：错误, extending：扩容中, ""：云盘被删除。
+     * Cloud disk status. Value options: available: available, attaching: attaching, attached: attached, detaching: detaching, creating: creating, deleting: deleting, error: error, extending: expanding, "": cloud disk deleted.
      */
     readonly volumeStatus: pulumi.Output<string>;
     /**
-     * 云盘类型，取值说明如下：ESSD*PL0：极速型SSD云盘，PL0规格。ESSD*FlexPL：极速型SSD云盘，FlexPL规格。TSSD_TL0：吞吐型SSD云盘
+     * Cloud disk type. Value options: ESSD*PL0: Ultra-fast SSD cloud disk, PL0 specification. ESSD*FlexPL: Ultra-fast SSD cloud disk, FlexPL specification. TSSD_TL0: Throughput SSD cloud disk
      */
     readonly volumeType: pulumi.Output<string>;
     /**
-     * 快照所在的可用区ID。
+     * Availability zone ID where the snapshot is located.
      */
     readonly zoneId: pulumi.Output<string>;
     /**
@@ -139,84 +139,84 @@ export declare class Snapshot extends pulumi.CustomResource {
  */
 export interface SnapshotState {
     /**
-     * 快照创建时间。
+     * Snapshot creation time.
      */
     creationTime?: pulumi.Input<string>;
     /**
-     * 快照描述信息，默认为空，长度限制为0~255个字符。
+     * Snapshot description. Default is empty. Length must be between 0 and 255 characters.
      */
     description?: pulumi.Input<string>;
     /**
-     * 镜像ID
+     * Image ID
      */
     imageId?: pulumi.Input<string>;
     /**
-     * 快照是否开启极速可用能力，取值说明如下：true：已开启极速可用能力。false：未开启极速可用能力。
+     * Whether the snapshot has enabled ultra-fast availability. Value options: true: ultra-fast availability enabled. false: ultra-fast availability not enabled.
      */
     instantAccess?: pulumi.Input<boolean>;
     /**
-     * 快照转储进度。
+     * Snapshot dump progress.
      */
     progress?: pulumi.Input<number>;
     /**
-     * 快照所要加入的Project（项目）名称。注意快照不会继承云盘的项目，即快照与云盘可以所属不同的项目。如果您在创建快照时未设置ProjectName，快照会默认加入default项目。
+     * Name of the Project to which the snapshot will be added. Note: snapshots do not inherit the project of the cloud disk, so snapshots and cloud disks can belong to different projects. If you do not set ProjectName when creating the snapshot, it will be added to the default project.
      */
     projectName?: pulumi.Input<string>;
     /**
-     * 快照保留时间，单位为天，取值说明如下：空：永久保留快照 。1~65536：指定保存天数。默认为空，即默认永久保留快照。说明快照保留时间从快照创建时刻开始计算。
+     * Snapshot retention period, in days. Value options: empty: retain snapshot permanently. 1~65536: specify retention days. Default is empty, which means retain snapshot permanently. Snapshot retention period is calculated from the snapshot creation time.
      */
     retentionDays?: pulumi.Input<number>;
     /**
-     * 快照是否共享。
+     * Whether the snapshot is shared.
      */
     shared?: pulumi.Input<boolean>;
     /**
-     * 快照一致性组ID。
+     * Snapshot consistency group ID.
      */
     snapshotGroupId?: pulumi.Input<string>;
     /**
-     * 快照ID。
+     * Snapshot ID.
      */
     snapshotId?: pulumi.Input<string>;
     /**
-     * 创建的快照名称。命名规范如下：长度限制为1~128个字符。只能包含中文、字母、数字、下划线（_）、中划线（-）和英文句号（.）。为防止和自动快照的名称冲突，不能以“auto”开头。
+     * Name of the created snapshot. Naming rules: length must be between 1 and 128 characters. Only Chinese characters, letters, numbers, underscores (_), hyphens (-), and periods (.) are allowed. To avoid conflicts with automatic snapshot names, the name cannot start with 'auto'.
      */
     snapshotName?: pulumi.Input<string>;
     /**
-     * 快照类型，取值说明如下：user：查询手动快照。auto：查询自动快照。share：查询共享快照。默认查询所有快照。
+     * Snapshot type. The available values are: user: query manual snapshots. auto: query automatic snapshots. share: query shared snapshots. By default, all snapshots are queried.
      */
     snapshotType?: pulumi.Input<string>;
     /**
-     * 快照状态，取值说明如下：available：可用。creating：创建中。rollbacking：回滚中。deleted：已删除。failed：错误。
+     * Snapshot status. Value options: available: available. creating: creating. rollbacking: rolling back. deleted: deleted. failed: error.
      */
     status?: pulumi.Input<string>;
     tags?: pulumi.Input<pulumi.Input<inputs.storageebs.SnapshotTag>[]>;
     /**
-     * 快照相关的云盘ID。
+     * Cloud disk ID associated with the snapshot.
      */
     volumeId?: pulumi.Input<string>;
     /**
-     * 云盘种类，取值说明如下：system：系统盘。data：数据盘。
+     * Cloud disk category. Value options: system: system disk. data: data disk.
      */
     volumeKind?: pulumi.Input<string>;
     /**
-     * 云盘名称。
+     * Cloud disk name.
      */
     volumeName?: pulumi.Input<string>;
     /**
-     * 云盘大小，单位为GiB。
+     * Cloud disk size, in GiB.
      */
     volumeSize?: pulumi.Input<number>;
     /**
-     * 云盘状态，取值说明如下：available：可用, attaching：挂载中, attached：已挂载, detaching：卸载中, creating：创建中, deleting：删除中, error：错误, extending：扩容中, ""：云盘被删除。
+     * Cloud disk status. Value options: available: available, attaching: attaching, attached: attached, detaching: detaching, creating: creating, deleting: deleting, error: error, extending: expanding, "": cloud disk deleted.
      */
     volumeStatus?: pulumi.Input<string>;
     /**
-     * 云盘类型，取值说明如下：ESSD*PL0：极速型SSD云盘，PL0规格。ESSD*FlexPL：极速型SSD云盘，FlexPL规格。TSSD_TL0：吞吐型SSD云盘
+     * Cloud disk type. Value options: ESSD*PL0: Ultra-fast SSD cloud disk, PL0 specification. ESSD*FlexPL: Ultra-fast SSD cloud disk, FlexPL specification. TSSD_TL0: Throughput SSD cloud disk
      */
     volumeType?: pulumi.Input<string>;
     /**
-     * 快照所在的可用区ID。
+     * Availability zone ID where the snapshot is located.
      */
     zoneId?: pulumi.Input<string>;
 }
@@ -225,24 +225,24 @@ export interface SnapshotState {
  */
 export interface SnapshotArgs {
     /**
-     * 快照描述信息，默认为空，长度限制为0~255个字符。
+     * Snapshot description. Default is empty. Length must be between 0 and 255 characters.
      */
     description?: pulumi.Input<string>;
     /**
-     * 快照所要加入的Project（项目）名称。注意快照不会继承云盘的项目，即快照与云盘可以所属不同的项目。如果您在创建快照时未设置ProjectName，快照会默认加入default项目。
+     * Name of the Project to which the snapshot will be added. Note: snapshots do not inherit the project of the cloud disk, so snapshots and cloud disks can belong to different projects. If you do not set ProjectName when creating the snapshot, it will be added to the default project.
      */
     projectName?: pulumi.Input<string>;
     /**
-     * 快照保留时间，单位为天，取值说明如下：空：永久保留快照 。1~65536：指定保存天数。默认为空，即默认永久保留快照。说明快照保留时间从快照创建时刻开始计算。
+     * Snapshot retention period, in days. Value options: empty: retain snapshot permanently. 1~65536: specify retention days. Default is empty, which means retain snapshot permanently. Snapshot retention period is calculated from the snapshot creation time.
      */
     retentionDays?: pulumi.Input<number>;
     /**
-     * 创建的快照名称。命名规范如下：长度限制为1~128个字符。只能包含中文、字母、数字、下划线（_）、中划线（-）和英文句号（.）。为防止和自动快照的名称冲突，不能以“auto”开头。
+     * Name of the created snapshot. Naming rules: length must be between 1 and 128 characters. Only Chinese characters, letters, numbers, underscores (_), hyphens (-), and periods (.) are allowed. To avoid conflicts with automatic snapshot names, the name cannot start with 'auto'.
      */
     snapshotName: pulumi.Input<string>;
     tags?: pulumi.Input<pulumi.Input<inputs.storageebs.SnapshotTag>[]>;
     /**
-     * 快照相关的云盘ID。
+     * Cloud disk ID associated with the snapshot.
      */
     volumeId: pulumi.Input<string>;
 }

package/storageebs/snapshot.js

@@ -6,7 +6,7 @@ exports.Snapshot = void 0;
 const pulumi = require("@pulumi/pulumi");
 const utilities = require("../utilities");
 /**
- * 快照是一种备份方式，每个快照都是云盘数据在某个时间点的备份文件。当数据丢失或故障时，您可以通过快照回滚云盘数据，找回丢失的数据。
+ * A snapshot is a backup method. Each snapshot is a backup file of cloud disk data at a specific point in time. When data is lost or a failure occurs, you can roll back cloud disk data using the snapshot to recover lost data.
  *
  * ## Example Usage
  *