@volcengine/pulumi-volcenginecc 0.0.28 → 0.0.30

package/alb/getServerGroup.d.ts

@@ -18,19 +18,19 @@ export interface GetServerGroupArgs {
  */
 export interface GetServerGroupResult {
     /**
-     * 后端服务器组的创建时间。
+     * Creation time of the backend server group.
      */
     readonly createTime: string;
     /**
-     * 是否开启服务器组的跨可用区负载均衡功能。取值如下：on（默认值）：开启。off：不开启。
+     * Whether to enable cross-zone load balancing for the server group. Values: on (default): enabled, off: disabled.
      */
     readonly crossZoneEnabled: string;
     /**
-     * 后端服务器组的描述。
+     * Description of the backend server group.
      */
     readonly description: string;
     /**
-     * 服务器组健康检查配置信息。
+     * Server group health check configuration information.
      */
     readonly healthCheck: outputs.alb.GetServerGroupHealthCheck;
     /**
@@ -38,63 +38,63 @@ export interface GetServerGroupResult {
      */
     readonly id: string;
     /**
-     * 服务器组的IP地址类型。目前只支持 IPv4
+     * IP address type of the server group. Only IPv4 is supported.
      */
     readonly ipAddressType: string;
     /**
-     * 后端服务器组关联的监听器信息。
+     * Listener information associated with the backend server group.
      */
     readonly listeners: outputs.alb.GetServerGroupListener[];
     /**
-     * 后端服务器组所属项目名称。
+     * Name of the project to which the backend server group belongs.
      */
     readonly projectName: string;
     /**
-     * 后端协议：HTTP，HTTPS。
+     * Backend protocol: HTTP, HTTPS.
      */
     readonly protocol: string;
     /**
-     * 调度算法。取值：wrr：加权轮询。wlc：加权最小连接数。sh：源地址哈希。
+     * Scheduling algorithm. Parameter values: wrr: Weighted round robin. wlc: Weighted least connections. sh: Source IP hash.
      */
     readonly scheduler: string;
     /**
-     * 服务器组内后端服务器的个数。
+     * Number of backend servers in the server group.
      */
     readonly serverCount: number;
     /**
-     * 后端服务器组的ID。
+     * ID of the backend server group.
      */
     readonly serverGroupId: string;
     /**
-     * 后端服务器组的名称。
+     * Name of the backend server group.
      */
     readonly serverGroupName: string;
     /**
-     * 后端服务器组的类型。instance：服务器类型，该类型服务器组支持添加 ecs、eni 实例作为后端服务器。ip：IP类型，该类型服务器组支持添加 IP 地址作为后端服务器。
+     * Type of backend server group. instance: Server type. This type of server group supports adding ECS and ENI instances as backend servers. ip: IP type. This type of server group supports adding IP addresses as backend servers.
      */
     readonly serverGroupType: string;
     /**
-     * 后端服务器组中服务器的信息。
+     * Information about servers in the backend server group.
      */
     readonly servers: outputs.alb.GetServerGroupServer[];
     /**
-     * 服务器组状态。Creating：创建中。Active：运行中。Configuring：配置中。Deleting：删除中。
+     * Server group status. Creating: creating. Active: running. Configuring: configuring. Deleting: deleting.
      */
     readonly status: string;
     /**
-     * 会话保持功能的参数信息。
+     * Session persistence parameter information.
      */
     readonly stickySessionConfig: outputs.alb.GetServerGroupStickySessionConfig;
     /**
-     * 标签信息。
+     * Tag information.
      */
     readonly tags: outputs.alb.GetServerGroupTag[];
     /**
-     * 后端服务器组的最近操作时间。
+     * Last operation time of the backend server group.
      */
     readonly updateTime: string;
     /**
-     * 后端服务器组所属 Vpc 的 ID。
+     * ID of the VPC to which the backend server group belongs.
      */
     readonly vpcId: string;
 }

package/alb/healthCheckTemplate.d.ts

@@ -2,7 +2,7 @@ import * as pulumi from "@pulumi/pulumi";
 import * as inputs from "../types/input";
 import * as outputs from "../types/output";
 /**
- * 健康检查是确保应用程序是否可用的关键功能。ALB 通过定期对后端服务器进行健康检查，来验证这些服务器是否可以接受新的请求。当一个后端服务器不能正常响应 ALB 的健康检查请求时，来自客户端的流量不会被路由到该服务器。ALB 会将流量转发至其他状态为正常的服务器上。从而保证了服务的连续性和可靠性。ALB 健康检查是基于服务器组进行的。服务器组启用健康检查后，ALB 定期检查服务器组内的后端服务器状态。
+ * Health checks are essential for ensuring application availability. ALB regularly performs health checks on backend servers to verify whether they can accept new requests. If a backend server fails to respond properly to ALB's health check requests, client traffic will not be routed to that server. ALB forwards traffic to other servers with a healthy status, ensuring service continuity and reliability. ALB health checks are performed based on server groups. Once health checks are enabled for a server group, ALB periodically checks the status of backend servers within the group.
  *
  * ## Example Usage
  *
@@ -55,72 +55,72 @@ export declare class HealthCheckTemplate extends pulumi.CustomResource {
      */
     static isInstance(obj: any): obj is HealthCheckTemplate;
     /**
-     * 健康检查模版的创建时间。
+     * Creation time of the health check template.
      */
     readonly createTime: pulumi.Output<string>;
     /**
-     * 健康检查描述。不能以http://或https://开头。必须以字母或中文开头，可包含数字、英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、短横线（-）、中文逗号（，）、中文句号（。） 。长度限制为1 ～ 255个字符。不填默认为空字符串。
+     * Description of the health check. Cannot start with http:// or https://. Must begin with a letter or Chinese character. May include numbers, English commas (,), periods (.), underscores (_), spaces ( ), equals signs (=), hyphens (-), Chinese commas (，), and Chinese periods (。). Length must be 1–255 characters. If not specified, defaults to an empty string.
      */
     readonly description: pulumi.Output<string>;
     /**
-     * 健康检查的域名。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。要求如下：需至少包含一个‘.’，且不允许以‘.’开头结尾。单个字符串由字母、数字、‘-’、‘.’字符组成，‘-’不得出现在字符串的头部或尾部。长度限制为1 ～ 128个字符。不填则此参数为空，负载均衡默认使用各后端服务器的私网IP地址进行健康检查。
+     * Domain name for the health check. This parameter is only effective when HealthCheckProtocol is set to HTTP. Requirements: Must contain at least one '.', and cannot start or end with '.'. The string can contain letters, numbers, '-', and '.' characters. '-' cannot appear at the beginning or end of the string. Length must be between 1 and 128 characters. If not specified, this parameter is empty and the load balancer uses the private IP address of each backend server for health checks.
      */
     readonly healthCheckDomain: pulumi.Output<string>;
     /**
-     * 健康检查正常的HTTP状态码。多个状态码用以半角逗号分隔，只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：http*2xx（默认）。http*3xx（默认） 。http*4xx 。http*5xx 。
+     * HTTP status codes indicating a successful health check. Separate multiple codes with commas. This parameter is only effective when HealthCheckProtocol is set to HTTP. Options: http*2xx (default), http*3xx (default), http*4xx, http*5xx.
      */
     readonly healthCheckHttpCode: pulumi.Output<string>;
     /**
-     * 健康检查HTTP协议版本。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：HTTP1.0（默认值）。HTTP1.1。
+     * HTTP protocol version for health checks. This parameter is effective only when HealthCheckProtocol is set to HTTP. Options: HTTP1.0 (default), HTTP1.1.
      */
     readonly healthCheckHttpVersion: pulumi.Output<string>;
     /**
-     * 执行健康检查的时间间隔，默认为2，取值1-300s 。
+     * Interval for performing health checks. Default is 2 seconds. Range: 1–300 seconds.
      */
     readonly healthCheckInterval: pulumi.Output<number>;
     /**
-     * 健康检查的方法。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：GETHEAD（默认方法）
+     * Health check method. This parameter is effective only when HealthCheckProtocol is set to HTTP. Options: GETHEAD (default method)
      */
     readonly healthCheckMethod: pulumi.Output<string>;
     /**
-     * 健康检查端口。取值如下：0：使用后端服务器端口进行健康检查。1-65535：使用您指定的端口进行健康检查。
+     * Port for the health check. Options: 0: Use the backend server port for health checks. 1–65535: Use the specified port for health checks.
      */
     readonly healthCheckPort: pulumi.Output<number>;
     /**
-     * 健康检查的协议。HTTPTCP。
+     * Protocol for the health check. HTTP or TCP.
      */
     readonly healthCheckProtocol: pulumi.Output<string>;
     /**
-     * 健康检查模板 ID。
+     * Health check template ID.
      */
     readonly healthCheckTemplateId: pulumi.Output<string>;
     /**
-     * 健康检查模板的名称。不能以http://或https://开头。必须以字母或中文开头，可包含数字、点（.）、下划线（_）和短横线（-）。长度限制在1～128字符之间。
+     * Name of the health check template. Cannot start with http:// or https://. Must start with a letter or Chinese character. Can contain numbers, periods (.), underscores (_), and hyphens (-). Length must be between 1 and 128 characters.
      */
     readonly healthCheckTemplateName: pulumi.Output<string>;
     /**
-     * 健康检查的响应超时时间，默认为2，取值1-60s 。
+     * Response timeout for the health check. Default is 2 seconds. Range: 1–60 seconds.
      */
     readonly healthCheckTimeout: pulumi.Output<number>;
     /**
-     * 健康检查的路径。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。要求如下：必须以字符‘/’开头。仅包含字母、数字、‘-’、‘_’、‘/’、‘.’、‘%’、‘?’、‘#’、‘&’、‘＝’字符。长度限制为1 ～ 128个字符。不填默认为“/”。
+     * Path for the health check. This parameter is only effective when HealthCheckProtocol is set to HTTP. Requirements: Must start with '/'. Can only contain letters, numbers, '-', '_', '/', '.', '%', '?', '#', '&', '=' characters. Length must be between 1 and 128 characters. If not specified, defaults to '/'.
      */
     readonly healthCheckUri: pulumi.Output<string>;
     /**
-     * 健康检查的健康阈值，默认为3，取值2-10次。
+     * Health threshold for the health check. Default is 3. Range: 2–10 times.
      */
     readonly healthyThreshold: pulumi.Output<number>;
     /**
-     * 健康检查模板所属项目名称。
+     * Project name to which the health check template belongs.
      */
     readonly projectName: pulumi.Output<string>;
     readonly tags: pulumi.Output<outputs.alb.HealthCheckTemplateTag[]>;
     /**
-     * 健康检查的不健康阈值，默认为3，取值2-10次。
+     * Unhealthy threshold for health checks. Default is 3; range is 2–10 times.
      */
     readonly unhealthyThreshold: pulumi.Output<number>;
     /**
-     * 健康检查模版最近一次的操作时间。
+     * Last operation time of the health check template.
      */
     readonly updateTime: pulumi.Output<string>;
     /**
@@ -137,72 +137,72 @@ export declare class HealthCheckTemplate extends pulumi.CustomResource {
  */
 export interface HealthCheckTemplateState {
     /**
-     * 健康检查模版的创建时间。
+     * Creation time of the health check template.
      */
     createTime?: pulumi.Input<string>;
     /**
-     * 健康检查描述。不能以http://或https://开头。必须以字母或中文开头，可包含数字、英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、短横线（-）、中文逗号（，）、中文句号（。） 。长度限制为1 ～ 255个字符。不填默认为空字符串。
+     * Description of the health check. Cannot start with http:// or https://. Must begin with a letter or Chinese character. May include numbers, English commas (,), periods (.), underscores (_), spaces ( ), equals signs (=), hyphens (-), Chinese commas (，), and Chinese periods (。). Length must be 1–255 characters. If not specified, defaults to an empty string.
      */
     description?: pulumi.Input<string>;
     /**
-     * 健康检查的域名。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。要求如下：需至少包含一个‘.’，且不允许以‘.’开头结尾。单个字符串由字母、数字、‘-’、‘.’字符组成，‘-’不得出现在字符串的头部或尾部。长度限制为1 ～ 128个字符。不填则此参数为空，负载均衡默认使用各后端服务器的私网IP地址进行健康检查。
+     * Domain name for the health check. This parameter is only effective when HealthCheckProtocol is set to HTTP. Requirements: Must contain at least one '.', and cannot start or end with '.'. The string can contain letters, numbers, '-', and '.' characters. '-' cannot appear at the beginning or end of the string. Length must be between 1 and 128 characters. If not specified, this parameter is empty and the load balancer uses the private IP address of each backend server for health checks.
      */
     healthCheckDomain?: pulumi.Input<string>;
     /**
-     * 健康检查正常的HTTP状态码。多个状态码用以半角逗号分隔，只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：http*2xx（默认）。http*3xx（默认） 。http*4xx 。http*5xx 。
+     * HTTP status codes indicating a successful health check. Separate multiple codes with commas. This parameter is only effective when HealthCheckProtocol is set to HTTP. Options: http*2xx (default), http*3xx (default), http*4xx, http*5xx.
      */
     healthCheckHttpCode?: pulumi.Input<string>;
     /**
-     * 健康检查HTTP协议版本。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：HTTP1.0（默认值）。HTTP1.1。
+     * HTTP protocol version for health checks. This parameter is effective only when HealthCheckProtocol is set to HTTP. Options: HTTP1.0 (default), HTTP1.1.
      */
     healthCheckHttpVersion?: pulumi.Input<string>;
     /**
-     * 执行健康检查的时间间隔，默认为2，取值1-300s 。
+     * Interval for performing health checks. Default is 2 seconds. Range: 1–300 seconds.
      */
     healthCheckInterval?: pulumi.Input<number>;
     /**
-     * 健康检查的方法。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：GETHEAD（默认方法）
+     * Health check method. This parameter is effective only when HealthCheckProtocol is set to HTTP. Options: GETHEAD (default method)
      */
     healthCheckMethod?: pulumi.Input<string>;
     /**
-     * 健康检查端口。取值如下：0：使用后端服务器端口进行健康检查。1-65535：使用您指定的端口进行健康检查。
+     * Port for the health check. Options: 0: Use the backend server port for health checks. 1–65535: Use the specified port for health checks.
      */
     healthCheckPort?: pulumi.Input<number>;
     /**
-     * 健康检查的协议。HTTPTCP。
+     * Protocol for the health check. HTTP or TCP.
      */
     healthCheckProtocol?: pulumi.Input<string>;
     /**
-     * 健康检查模板 ID。
+     * Health check template ID.
      */
     healthCheckTemplateId?: pulumi.Input<string>;
     /**
-     * 健康检查模板的名称。不能以http://或https://开头。必须以字母或中文开头，可包含数字、点（.）、下划线（_）和短横线（-）。长度限制在1～128字符之间。
+     * Name of the health check template. Cannot start with http:// or https://. Must start with a letter or Chinese character. Can contain numbers, periods (.), underscores (_), and hyphens (-). Length must be between 1 and 128 characters.
      */
     healthCheckTemplateName?: pulumi.Input<string>;
     /**
-     * 健康检查的响应超时时间，默认为2，取值1-60s 。
+     * Response timeout for the health check. Default is 2 seconds. Range: 1–60 seconds.
      */
     healthCheckTimeout?: pulumi.Input<number>;
     /**
-     * 健康检查的路径。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。要求如下：必须以字符‘/’开头。仅包含字母、数字、‘-’、‘_’、‘/’、‘.’、‘%’、‘?’、‘#’、‘&’、‘＝’字符。长度限制为1 ～ 128个字符。不填默认为“/”。
+     * Path for the health check. This parameter is only effective when HealthCheckProtocol is set to HTTP. Requirements: Must start with '/'. Can only contain letters, numbers, '-', '_', '/', '.', '%', '?', '#', '&', '=' characters. Length must be between 1 and 128 characters. If not specified, defaults to '/'.
      */
     healthCheckUri?: pulumi.Input<string>;
     /**
-     * 健康检查的健康阈值，默认为3，取值2-10次。
+     * Health threshold for the health check. Default is 3. Range: 2–10 times.
      */
     healthyThreshold?: pulumi.Input<number>;
     /**
-     * 健康检查模板所属项目名称。
+     * Project name to which the health check template belongs.
      */
     projectName?: pulumi.Input<string>;
     tags?: pulumi.Input<pulumi.Input<inputs.alb.HealthCheckTemplateTag>[]>;
     /**
-     * 健康检查的不健康阈值，默认为3，取值2-10次。
+     * Unhealthy threshold for health checks. Default is 3; range is 2–10 times.
      */
     unhealthyThreshold?: pulumi.Input<number>;
     /**
-     * 健康检查模版最近一次的操作时间。
+     * Last operation time of the health check template.
      */
     updateTime?: pulumi.Input<string>;
 }
@@ -211,60 +211,60 @@ export interface HealthCheckTemplateState {
  */
 export interface HealthCheckTemplateArgs {
     /**
-     * 健康检查描述。不能以http://或https://开头。必须以字母或中文开头，可包含数字、英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、短横线（-）、中文逗号（，）、中文句号（。） 。长度限制为1 ～ 255个字符。不填默认为空字符串。
+     * Description of the health check. Cannot start with http:// or https://. Must begin with a letter or Chinese character. May include numbers, English commas (,), periods (.), underscores (_), spaces ( ), equals signs (=), hyphens (-), Chinese commas (，), and Chinese periods (。). Length must be 1–255 characters. If not specified, defaults to an empty string.
      */
     description?: pulumi.Input<string>;
     /**
-     * 健康检查的域名。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。要求如下：需至少包含一个‘.’，且不允许以‘.’开头结尾。单个字符串由字母、数字、‘-’、‘.’字符组成，‘-’不得出现在字符串的头部或尾部。长度限制为1 ～ 128个字符。不填则此参数为空，负载均衡默认使用各后端服务器的私网IP地址进行健康检查。
+     * Domain name for the health check. This parameter is only effective when HealthCheckProtocol is set to HTTP. Requirements: Must contain at least one '.', and cannot start or end with '.'. The string can contain letters, numbers, '-', and '.' characters. '-' cannot appear at the beginning or end of the string. Length must be between 1 and 128 characters. If not specified, this parameter is empty and the load balancer uses the private IP address of each backend server for health checks.
      */
     healthCheckDomain?: pulumi.Input<string>;
     /**
-     * 健康检查正常的HTTP状态码。多个状态码用以半角逗号分隔，只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：http*2xx（默认）。http*3xx（默认） 。http*4xx 。http*5xx 。
+     * HTTP status codes indicating a successful health check. Separate multiple codes with commas. This parameter is only effective when HealthCheckProtocol is set to HTTP. Options: http*2xx (default), http*3xx (default), http*4xx, http*5xx.
      */
     healthCheckHttpCode?: pulumi.Input<string>;
     /**
-     * 健康检查HTTP协议版本。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：HTTP1.0（默认值）。HTTP1.1。
+     * HTTP protocol version for health checks. This parameter is effective only when HealthCheckProtocol is set to HTTP. Options: HTTP1.0 (default), HTTP1.1.
      */
     healthCheckHttpVersion?: pulumi.Input<string>;
     /**
-     * 执行健康检查的时间间隔，默认为2，取值1-300s 。
+     * Interval for performing health checks. Default is 2 seconds. Range: 1–300 seconds.
      */
     healthCheckInterval?: pulumi.Input<number>;
     /**
-     * 健康检查的方法。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。取值如下：GETHEAD（默认方法）
+     * Health check method. This parameter is effective only when HealthCheckProtocol is set to HTTP. Options: GETHEAD (default method)
      */
     healthCheckMethod?: pulumi.Input<string>;
     /**
-     * 健康检查端口。取值如下：0：使用后端服务器端口进行健康检查。1-65535：使用您指定的端口进行健康检查。
+     * Port for the health check. Options: 0: Use the backend server port for health checks. 1–65535: Use the specified port for health checks.
      */
     healthCheckPort?: pulumi.Input<number>;
     /**
-     * 健康检查的协议。HTTPTCP。
+     * Protocol for the health check. HTTP or TCP.
      */
     healthCheckProtocol?: pulumi.Input<string>;
     /**
-     * 健康检查模板的名称。不能以http://或https://开头。必须以字母或中文开头，可包含数字、点（.）、下划线（_）和短横线（-）。长度限制在1～128字符之间。
+     * Name of the health check template. Cannot start with http:// or https://. Must start with a letter or Chinese character. Can contain numbers, periods (.), underscores (_), and hyphens (-). Length must be between 1 and 128 characters.
      */
     healthCheckTemplateName: pulumi.Input<string>;
     /**
-     * 健康检查的响应超时时间，默认为2，取值1-60s 。
+     * Response timeout for the health check. Default is 2 seconds. Range: 1–60 seconds.
      */
     healthCheckTimeout?: pulumi.Input<number>;
     /**
-     * 健康检查的路径。只有 HealthCheckProtocol 设置为 HTTP 时，该参数才生效。要求如下：必须以字符‘/’开头。仅包含字母、数字、‘-’、‘_’、‘/’、‘.’、‘%’、‘?’、‘#’、‘&’、‘＝’字符。长度限制为1 ～ 128个字符。不填默认为“/”。
+     * Path for the health check. This parameter is only effective when HealthCheckProtocol is set to HTTP. Requirements: Must start with '/'. Can only contain letters, numbers, '-', '_', '/', '.', '%', '?', '#', '&', '=' characters. Length must be between 1 and 128 characters. If not specified, defaults to '/'.
      */
     healthCheckUri?: pulumi.Input<string>;
     /**
-     * 健康检查的健康阈值，默认为3，取值2-10次。
+     * Health threshold for the health check. Default is 3. Range: 2–10 times.
      */
     healthyThreshold?: pulumi.Input<number>;
     /**
-     * 健康检查模板所属项目名称。
+     * Project name to which the health check template belongs.
      */
     projectName?: pulumi.Input<string>;
     tags?: pulumi.Input<pulumi.Input<inputs.alb.HealthCheckTemplateTag>[]>;
     /**
-     * 健康检查的不健康阈值，默认为3，取值2-10次。
+     * Unhealthy threshold for health checks. Default is 3; range is 2–10 times.
      */
     unhealthyThreshold?: pulumi.Input<number>;
 }

package/alb/healthCheckTemplate.js

@@ -6,7 +6,7 @@ exports.HealthCheckTemplate = void 0;
 const pulumi = require("@pulumi/pulumi");
 const utilities = require("../utilities");
 /**
- * 健康检查是确保应用程序是否可用的关键功能。ALB 通过定期对后端服务器进行健康检查，来验证这些服务器是否可以接受新的请求。当一个后端服务器不能正常响应 ALB 的健康检查请求时，来自客户端的流量不会被路由到该服务器。ALB 会将流量转发至其他状态为正常的服务器上。从而保证了服务的连续性和可靠性。ALB 健康检查是基于服务器组进行的。服务器组启用健康检查后，ALB 定期检查服务器组内的后端服务器状态。
+ * Health checks are essential for ensuring application availability. ALB regularly performs health checks on backend servers to verify whether they can accept new requests. If a backend server fails to respond properly to ALB's health check requests, client traffic will not be routed to that server. ALB forwards traffic to other servers with a healthy status, ensuring service continuity and reliability. ALB health checks are performed based on server groups. Once health checks are enabled for a server group, ALB periodically checks the status of backend servers within the group.
  *
  * ## Example Usage
  *