@things-factory/figure-ui 10.1.26 → 10.1.27

package/translations/ms.json

@@ -96,6 +96,8 @@
   "figure.label.channel-path": "digerakkan",
   "figure.label.channel-pivot": "pangsi",
   "figure.label.channel-target": "bahagian",
+  "figure.label.channel-target-joints": "sendi",
+  "figure.label.channel-target-parts": "bahagian",
   "figure.label.channels": "saluran",
   "figure.label.clip-name": "nama clip",
   "figure.label.clips": "animasi (dimainkan mengikut masa)",
@@ -137,6 +139,21 @@
   "figure.label.intensity": "intensity",
   "figure.label.interpolation-linear": "licin",
   "figure.label.interpolation-step": "berperingkat",
+  "figure.label.joint": "sendi",
+  "figure.label.joint-axis": "paksi",
+  "figure.label.joint-limit-max": "maks",
+  "figure.label.joint-limit-min": "min",
+  "figure.label.joint-limits-deg": "had (darjah)",
+  "figure.label.joint-limits-mm": "had (mm)",
+  "figure.label.joint-origin": "titik asal",
+  "figure.label.joint-parent": "dilekatkan pada",
+  "figure.label.joint-parent-none": "tiada (bingkai figure)",
+  "figure.label.joint-type": "pergerakan",
+  "figure.label.joint-type-continuous": "putar tanpa had",
+  "figure.label.joint-type-none": "tetap",
+  "figure.label.joint-type-prismatic": "gelongsor",
+  "figure.label.joint-type-revolute": "putar dalam had",
+  "figure.label.joint-value": "nilai sendi",
   "figure.label.keep-round": "section",
   "figure.label.key-at": "masa (s)",
   "figure.label.key-at-value": "kedudukan (0–1)",
@@ -319,6 +336,13 @@
   "figure.text.how-many-fit": "berapa banyak muat pada satu lukisan tanpa melambatkannya",
   "figure.text.instances-unit": "instances",
   "figure.text.interpolation-explained": "cara jurang antara kunci diisi.",
+  "figure.text.joint-channel-value-deg": "nilai kunci ialah sudut sendi dalam darjah.",
+  "figure.text.joint-channel-value-mm": "nilai kunci ialah jarak gerak sendi dalam mm.",
+  "figure.text.joint-driven-by": "parameter \"{name}\" menggerakkan sendi ini. semak dalam pratonton.",
+  "figure.text.joint-explained": "apabila bahagian yang dilekatkan bergerak, bahagian ini turut bergerak. sendi menetapkan paksi putaran atau arah gelongsor bahagian ini berbanding bahagian tersebut, serta hadnya. parameter yang dicipta bersama sendi memberi nilainya.",
+  "figure.text.joint-limits-must-include-zero": "had mesti merangkumi 0. pose seperti dilukis ialah 0.",
+  "figure.text.joint-not-driven": "tiada parameter menggerakkan sendi ini. tambah satu dalam tab animasi.",
+  "figure.text.joint-value-beyond-limits": "di luar had sendi.",
   "figure.text.keep-round-cost": "1 draw call",
   "figure.text.keep-round-merged": "merged into a group",
   "figure.text.keep-round-off": "off",

package/translations/zh.json

@@ -96,6 +96,8 @@
   "figure.label.channel-path": "移动内容",
   "figure.label.channel-pivot": "旋转中心",
   "figure.label.channel-target": "部件",
+  "figure.label.channel-target-joints": "关节",
+  "figure.label.channel-target-parts": "部件",
   "figure.label.channels": "通道",
   "figure.label.clip-name": "clip 名称",
   "figure.label.clips": "动画 (随时间播放)",
@@ -137,6 +139,21 @@
   "figure.label.intensity": "intensity",
   "figure.label.interpolation-linear": "平滑",
   "figure.label.interpolation-step": "阶梯",
+  "figure.label.joint": "关节",
+  "figure.label.joint-axis": "轴",
+  "figure.label.joint-limit-max": "最大",
+  "figure.label.joint-limit-min": "最小",
+  "figure.label.joint-limits-deg": "活动范围（度）",
+  "figure.label.joint-limits-mm": "活动范围（mm）",
+  "figure.label.joint-origin": "基准点",
+  "figure.label.joint-parent": "附着于",
+  "figure.label.joint-parent-none": "无（Figure 框架）",
+  "figure.label.joint-type": "运动",
+  "figure.label.joint-type-continuous": "连续旋转",
+  "figure.label.joint-type-none": "固定",
+  "figure.label.joint-type-prismatic": "直线移动",
+  "figure.label.joint-type-revolute": "旋转（范围内）",
+  "figure.label.joint-value": "关节值",
   "figure.label.keep-round": "section",
   "figure.label.key-at": "时间 (秒)",
   "figure.label.key-at-value": "值位置 (0–1)",
@@ -319,6 +336,13 @@
   "figure.text.how-many-fit": "一个图面上不致变慢可放置的数量",
   "figure.text.instances-unit": "instances",
   "figure.text.interpolation-explained": "关键帧之间如何衔接。",
+  "figure.text.joint-channel-value-deg": "关键帧的值是关节角度（度）。",
+  "figure.text.joint-channel-value-mm": "关键帧的值是关节移动距离（mm）。",
+  "figure.text.joint-driven-by": "参数“{name}”驱动此关节。请在预览中确认。",
+  "figure.text.joint-explained": "所附着的部件移动时，此部件也随之移动。设置关节后，可确定此部件相对于所附着部件旋转的轴或滑动的方向，以及活动范围。关节的值由同时创建的参数提供。",
+  "figure.text.joint-limits-must-include-zero": "活动范围必须包含 0。当前绘制的姿势即为 0。",
+  "figure.text.joint-not-driven": "没有驱动此关节的参数。请在“动画”选项卡中添加参数。",
+  "figure.text.joint-value-beyond-limits": "超出关节的活动范围。",
   "figure.text.keep-round-cost": "1 draw call",
   "figure.text.keep-round-merged": "merged into a group",
   "figure.text.keep-round-off": "off",