@shopify/react-native-skia 0.0.135

package/cpp/skia/include/core/SkRect.h

@@ -0,0 +1,1378 @@
+/*
+ * Copyright 2006 The Android Open Source Project
+ *
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+#ifndef SkRect_DEFINED
+#define SkRect_DEFINED
+
+#include "include/core/SkPoint.h"
+#include "include/core/SkSize.h"
+#include "include/private/SkSafe32.h"
+#include "include/private/SkTFitsIn.h"
+
+#include <algorithm>
+#include <utility>
+
+struct SkRect;
+
+/** \struct SkIRect
+    SkIRect holds four 32-bit integer coordinates describing the upper and
+    lower bounds of a rectangle. SkIRect may be created from outer bounds or
+    from position, width, and height. SkIRect describes an area; if its right
+    is less than or equal to its left, or if its bottom is less than or equal to
+    its top, it is considered empty.
+*/
+struct SK_API SkIRect {
+    int32_t fLeft;   //!< smaller x-axis bounds
+    int32_t fTop;    //!< smaller y-axis bounds
+    int32_t fRight;  //!< larger x-axis bounds
+    int32_t fBottom; //!< larger y-axis bounds
+
+    /** Returns constructed SkIRect set to (0, 0, 0, 0).
+        Many other rectangles are empty; if left is equal to or greater than right,
+        or if top is equal to or greater than bottom. Setting all members to zero
+        is a convenience, but does not designate a special empty rectangle.
+
+        @return  bounds (0, 0, 0, 0)
+    */
+    static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeEmpty() {
+        return SkIRect{0, 0, 0, 0};
+    }
+
+    /** Returns constructed SkIRect set to (0, 0, w, h). Does not validate input; w or h
+        may be negative.
+
+        @param w  width of constructed SkIRect
+        @param h  height of constructed SkIRect
+        @return   bounds (0, 0, w, h)
+    */
+    static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeWH(int32_t w, int32_t h) {
+        return SkIRect{0, 0, w, h};
+    }
+
+    /** Returns constructed SkIRect set to (0, 0, size.width(), size.height()).
+        Does not validate input; size.width() or size.height() may be negative.
+
+        @param size  values for SkIRect width and height
+        @return      bounds (0, 0, size.width(), size.height())
+    */
+    static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeSize(const SkISize& size) {
+        return SkIRect{0, 0, size.fWidth, size.fHeight};
+    }
+
+    /** Returns constructed SkIRect set to (pt.x(), pt.y(), pt.x() + size.width(),
+        pt.y() + size.height()). Does not validate input; size.width() or size.height() may be
+        negative.
+
+        @param pt    values for SkIRect fLeft and fTop
+        @param size  values for SkIRect width and height
+        @return      bounds at pt with width and height of size
+    */
+    static constexpr SkIRect SK_WARN_UNUSED_RESULT MakePtSize(SkIPoint pt, SkISize size) {
+        return MakeXYWH(pt.x(), pt.y(), size.width(), size.height());
+    }
+
+    /** Returns constructed SkIRect set to (l, t, r, b). Does not sort input; SkIRect may
+        result in fLeft greater than fRight, or fTop greater than fBottom.
+
+        @param l  integer stored in fLeft
+        @param t  integer stored in fTop
+        @param r  integer stored in fRight
+        @param b  integer stored in fBottom
+        @return   bounds (l, t, r, b)
+    */
+    static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeLTRB(int32_t l, int32_t t,
+                                                            int32_t r, int32_t b) {
+        return SkIRect{l, t, r, b};
+    }
+
+    /** Returns constructed SkIRect set to: (x, y, x + w, y + h).
+        Does not validate input; w or h may be negative.
+
+        @param x  stored in fLeft
+        @param y  stored in fTop
+        @param w  added to x and stored in fRight
+        @param h  added to y and stored in fBottom
+        @return   bounds at (x, y) with width w and height h
+    */
+    static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeXYWH(int32_t x, int32_t y,
+                                                            int32_t w, int32_t h) {
+        return { x, y, Sk32_sat_add(x, w), Sk32_sat_add(y, h) };
+    }
+
+    /** Returns left edge of SkIRect, if sorted.
+        Call sort() to reverse fLeft and fRight if needed.
+
+        @return  fLeft
+    */
+    constexpr int32_t left() const { return fLeft; }
+
+    /** Returns top edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid,
+        and sort() to reverse fTop and fBottom if needed.
+
+        @return  fTop
+    */
+    constexpr int32_t top() const { return fTop; }
+
+    /** Returns right edge of SkIRect, if sorted.
+        Call sort() to reverse fLeft and fRight if needed.
+
+        @return  fRight
+    */
+    constexpr int32_t right() const { return fRight; }
+
+    /** Returns bottom edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid,
+        and sort() to reverse fTop and fBottom if needed.
+
+        @return  fBottom
+    */
+    constexpr int32_t bottom() const { return fBottom; }
+
+    /** Returns left edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid,
+        and sort() to reverse fLeft and fRight if needed.
+
+        @return  fLeft
+    */
+    constexpr int32_t x() const { return fLeft; }
+
+    /** Returns top edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid,
+        and sort() to reverse fTop and fBottom if needed.
+
+        @return  fTop
+    */
+    constexpr int32_t y() const { return fTop; }
+
+    // Experimental
+    constexpr SkIPoint topLeft() const { return {fLeft, fTop}; }
+
+    /** Returns span on the x-axis. This does not check if SkIRect is sorted, or if
+        result fits in 32-bit signed integer; result may be negative.
+
+        @return  fRight minus fLeft
+    */
+    constexpr int32_t width() const { return Sk32_can_overflow_sub(fRight, fLeft); }
+
+    /** Returns span on the y-axis. This does not check if SkIRect is sorted, or if
+        result fits in 32-bit signed integer; result may be negative.
+
+        @return  fBottom minus fTop
+    */
+    constexpr int32_t height() const { return Sk32_can_overflow_sub(fBottom, fTop); }
+
+    /** Returns spans on the x-axis and y-axis. This does not check if SkIRect is sorted,
+        or if result fits in 32-bit signed integer; result may be negative.
+
+        @return  SkISize (width, height)
+    */
+    constexpr SkISize size() const { return SkISize::Make(this->width(), this->height()); }
+
+    /** Returns span on the x-axis. This does not check if SkIRect is sorted, so the
+        result may be negative. This is safer than calling width() since width() might
+        overflow in its calculation.
+
+        @return  fRight minus fLeft cast to int64_t
+    */
+    constexpr int64_t width64() const { return (int64_t)fRight - (int64_t)fLeft; }
+
+    /** Returns span on the y-axis. This does not check if SkIRect is sorted, so the
+        result may be negative. This is safer than calling height() since height() might
+        overflow in its calculation.
+
+        @return  fBottom minus fTop cast to int64_t
+    */
+    constexpr int64_t height64() const { return (int64_t)fBottom - (int64_t)fTop; }
+
+    /** Returns true if fLeft is equal to or greater than fRight, or if fTop is equal
+        to or greater than fBottom. Call sort() to reverse rectangles with negative
+        width64() or height64().
+
+        @return  true if width64() or height64() are zero or negative
+    */
+    bool isEmpty64() const { return fRight <= fLeft || fBottom <= fTop; }
+
+    /** Returns true if width() or height() are zero or negative.
+
+        @return  true if width() or height() are zero or negative
+    */
+    bool isEmpty() const {
+        int64_t w = this->width64();
+        int64_t h = this->height64();
+        if (w <= 0 || h <= 0) {
+            return true;
+        }
+        // Return true if either exceeds int32_t
+        return !SkTFitsIn<int32_t>(w | h);
+    }
+
+    /** Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are
+        identical to corresponding members in b.
+
+        @param a  SkIRect to compare
+        @param b  SkIRect to compare
+        @return   true if members are equal
+    */
+    friend bool operator==(const SkIRect& a, const SkIRect& b) {
+        return !memcmp(&a, &b, sizeof(a));
+    }
+
+    /** Returns true if any member in a: fLeft, fTop, fRight, and fBottom; is not
+        identical to the corresponding member in b.
+
+        @param a  SkIRect to compare
+        @param b  SkIRect to compare
+        @return   true if members are not equal
+    */
+    friend bool operator!=(const SkIRect& a, const SkIRect& b) {
+        return !(a == b);
+    }
+
+    /** Sets SkIRect to (0, 0, 0, 0).
+
+        Many other rectangles are empty; if left is equal to or greater than right,
+        or if top is equal to or greater than bottom. Setting all members to zero
+        is a convenience, but does not designate a special empty rectangle.
+    */
+    void setEmpty() { memset(this, 0, sizeof(*this)); }
+
+    /** Sets SkIRect to (left, top, right, bottom).
+        left and right are not sorted; left is not necessarily less than right.
+        top and bottom are not sorted; top is not necessarily less than bottom.
+
+        @param left    stored in fLeft
+        @param top     stored in fTop
+        @param right   stored in fRight
+        @param bottom  stored in fBottom
+    */
+    void setLTRB(int32_t left, int32_t top, int32_t right, int32_t bottom) {
+        fLeft   = left;
+        fTop    = top;
+        fRight  = right;
+        fBottom = bottom;
+    }
+
+    /** Sets SkIRect to: (x, y, x + width, y + height).
+        Does not validate input; width or height may be negative.
+
+        @param x       stored in fLeft
+        @param y       stored in fTop
+        @param width   added to x and stored in fRight
+        @param height  added to y and stored in fBottom
+    */
+    void setXYWH(int32_t x, int32_t y, int32_t width, int32_t height) {
+        fLeft   = x;
+        fTop    = y;
+        fRight  = Sk32_sat_add(x, width);
+        fBottom = Sk32_sat_add(y, height);
+    }
+
+    void setWH(int32_t width, int32_t height) {
+        fLeft   = 0;
+        fTop    = 0;
+        fRight  = width;
+        fBottom = height;
+    }
+
+    void setSize(SkISize size) {
+        fLeft = 0;
+        fTop = 0;
+        fRight = size.width();
+        fBottom = size.height();
+    }
+
+    /** Returns SkIRect offset by (dx, dy).
+
+        If dx is negative, SkIRect returned is moved to the left.
+        If dx is positive, SkIRect returned is moved to the right.
+        If dy is negative, SkIRect returned is moved upward.
+        If dy is positive, SkIRect returned is moved downward.
+
+        @param dx  offset added to fLeft and fRight
+        @param dy  offset added to fTop and fBottom
+        @return    SkIRect offset by dx and dy, with original width and height
+    */
+    constexpr SkIRect makeOffset(int32_t dx, int32_t dy) const {
+        return {
+            Sk32_sat_add(fLeft,  dx), Sk32_sat_add(fTop,    dy),
+            Sk32_sat_add(fRight, dx), Sk32_sat_add(fBottom, dy),
+        };
+    }
+
+    /** Returns SkIRect offset by (offset.x(), offset.y()).
+
+        If offset.x() is negative, SkIRect returned is moved to the left.
+        If offset.x() is positive, SkIRect returned is moved to the right.
+        If offset.y() is negative, SkIRect returned is moved upward.
+        If offset.y() is positive, SkIRect returned is moved downward.
+
+        @param offset  translation vector
+        @return    SkIRect translated by offset, with original width and height
+    */
+    constexpr SkIRect makeOffset(SkIVector offset) const {
+        return this->makeOffset(offset.x(), offset.y());
+    }
+
+    /** Returns SkIRect, inset by (dx, dy).
+
+        If dx is negative, SkIRect returned is wider.
+        If dx is positive, SkIRect returned is narrower.
+        If dy is negative, SkIRect returned is taller.
+        If dy is positive, SkIRect returned is shorter.
+
+        @param dx  offset added to fLeft and subtracted from fRight
+        @param dy  offset added to fTop and subtracted from fBottom
+        @return    SkIRect inset symmetrically left and right, top and bottom
+    */
+    SkIRect makeInset(int32_t dx, int32_t dy) const {
+        return {
+            Sk32_sat_add(fLeft,  dx), Sk32_sat_add(fTop,    dy),
+            Sk32_sat_sub(fRight, dx), Sk32_sat_sub(fBottom, dy),
+        };
+    }
+
+    /** Returns SkIRect, outset by (dx, dy).
+
+        If dx is negative, SkIRect returned is narrower.
+        If dx is positive, SkIRect returned is wider.
+        If dy is negative, SkIRect returned is shorter.
+        If dy is positive, SkIRect returned is taller.
+
+        @param dx  offset subtracted to fLeft and added from fRight
+        @param dy  offset subtracted to fTop and added from fBottom
+        @return    SkIRect outset symmetrically left and right, top and bottom
+    */
+    SkIRect makeOutset(int32_t dx, int32_t dy) const {
+        return {
+            Sk32_sat_sub(fLeft,  dx), Sk32_sat_sub(fTop,    dy),
+            Sk32_sat_add(fRight, dx), Sk32_sat_add(fBottom, dy),
+        };
+    }
+
+    /** Offsets SkIRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom.
+
+        If dx is negative, moves SkIRect returned to the left.
+        If dx is positive, moves SkIRect returned to the right.
+        If dy is negative, moves SkIRect returned upward.
+        If dy is positive, moves SkIRect returned downward.
+
+        @param dx  offset added to fLeft and fRight
+        @param dy  offset added to fTop and fBottom
+    */
+    void offset(int32_t dx, int32_t dy) {
+        fLeft   = Sk32_sat_add(fLeft,   dx);
+        fTop    = Sk32_sat_add(fTop,    dy);
+        fRight  = Sk32_sat_add(fRight,  dx);
+        fBottom = Sk32_sat_add(fBottom, dy);
+    }
+
+    /** Offsets SkIRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to
+        fTop, fBottom.
+
+        If delta.fX is negative, moves SkIRect returned to the left.
+        If delta.fX is positive, moves SkIRect returned to the right.
+        If delta.fY is negative, moves SkIRect returned upward.
+        If delta.fY is positive, moves SkIRect returned downward.
+
+        @param delta  offset added to SkIRect
+    */
+    void offset(const SkIPoint& delta) {
+        this->offset(delta.fX, delta.fY);
+    }
+
+    /** Offsets SkIRect so that fLeft equals newX, and fTop equals newY. width and height
+        are unchanged.
+
+        @param newX  stored in fLeft, preserving width()
+        @param newY  stored in fTop, preserving height()
+    */
+    void offsetTo(int32_t newX, int32_t newY) {
+        fRight  = Sk64_pin_to_s32((int64_t)fRight + newX - fLeft);
+        fBottom = Sk64_pin_to_s32((int64_t)fBottom + newY - fTop);
+        fLeft   = newX;
+        fTop    = newY;
+    }
+
+    /** Insets SkIRect by (dx,dy).
+
+        If dx is positive, makes SkIRect narrower.
+        If dx is negative, makes SkIRect wider.
+        If dy is positive, makes SkIRect shorter.
+        If dy is negative, makes SkIRect taller.
+
+        @param dx  offset added to fLeft and subtracted from fRight
+        @param dy  offset added to fTop and subtracted from fBottom
+    */
+    void inset(int32_t dx, int32_t dy) {
+        fLeft   = Sk32_sat_add(fLeft,   dx);
+        fTop    = Sk32_sat_add(fTop,    dy);
+        fRight  = Sk32_sat_sub(fRight,  dx);
+        fBottom = Sk32_sat_sub(fBottom, dy);
+    }
+
+    /** Outsets SkIRect by (dx, dy).
+
+        If dx is positive, makes SkIRect wider.
+        If dx is negative, makes SkIRect narrower.
+        If dy is positive, makes SkIRect taller.
+        If dy is negative, makes SkIRect shorter.
+
+        @param dx  subtracted to fLeft and added from fRight
+        @param dy  subtracted to fTop and added from fBottom
+    */
+    void outset(int32_t dx, int32_t dy)  { this->inset(-dx, -dy); }
+
+    /** Adjusts SkIRect by adding dL to fLeft, dT to fTop, dR to fRight, and dB to fBottom.
+
+        If dL is positive, narrows SkIRect on the left. If negative, widens it on the left.
+        If dT is positive, shrinks SkIRect on the top. If negative, lengthens it on the top.
+        If dR is positive, narrows SkIRect on the right. If negative, widens it on the right.
+        If dB is positive, shrinks SkIRect on the bottom. If negative, lengthens it on the bottom.
+
+        The resulting SkIRect is not checked for validity. Thus, if the resulting SkIRect left is
+        greater than right, the SkIRect will be considered empty. Call sort() after this call
+        if that is not the desired behavior.
+
+        @param dL  offset added to fLeft
+        @param dT  offset added to fTop
+        @param dR  offset added to fRight
+        @param dB  offset added to fBottom
+    */
+    void adjust(int32_t dL, int32_t dT, int32_t dR, int32_t dB) {
+        fLeft   = Sk32_sat_add(fLeft,   dL);
+        fTop    = Sk32_sat_add(fTop,    dT);
+        fRight  = Sk32_sat_add(fRight,  dR);
+        fBottom = Sk32_sat_add(fBottom, dB);
+    }
+
+    /** Returns true if: fLeft <= x < fRight && fTop <= y < fBottom.
+        Returns false if SkIRect is empty.
+
+        Considers input to describe constructed SkIRect: (x, y, x + 1, y + 1) and
+        returns true if constructed area is completely enclosed by SkIRect area.
+
+        @param x  test SkIPoint x-coordinate
+        @param y  test SkIPoint y-coordinate
+        @return   true if (x, y) is inside SkIRect
+    */
+    bool contains(int32_t x, int32_t y) const {
+        return x >= fLeft && x < fRight && y >= fTop && y < fBottom;
+    }
+
+    /** Returns true if SkIRect contains r.
+     Returns false if SkIRect is empty or r is empty.
+
+     SkIRect contains r when SkIRect area completely includes r area.
+
+     @param r  SkIRect contained
+     @return   true if all sides of SkIRect are outside r
+     */
+    bool contains(const SkIRect& r) const {
+        return  !r.isEmpty() && !this->isEmpty() &&     // check for empties
+                fLeft <= r.fLeft && fTop <= r.fTop &&
+                fRight >= r.fRight && fBottom >= r.fBottom;
+    }
+
+    /** Returns true if SkIRect contains r.
+        Returns false if SkIRect is empty or r is empty.
+
+        SkIRect contains r when SkIRect area completely includes r area.
+
+        @param r  SkRect contained
+        @return   true if all sides of SkIRect are outside r
+    */
+    inline bool contains(const SkRect& r) const;
+
+    /** Returns true if SkIRect contains construction.
+        Asserts if SkIRect is empty or construction is empty, and if SK_DEBUG is defined.
+
+        Return is undefined if SkIRect is empty or construction is empty.
+
+        @param r  SkIRect contained
+        @return   true if all sides of SkIRect are outside r
+    */
+    bool containsNoEmptyCheck(const SkIRect& r) const {
+        SkASSERT(fLeft < fRight && fTop < fBottom);
+        SkASSERT(r.fLeft < r.fRight && r.fTop < r.fBottom);
+        return fLeft <= r.fLeft && fTop <= r.fTop && fRight >= r.fRight && fBottom >= r.fBottom;
+    }
+
+    /** Returns true if SkIRect intersects r, and sets SkIRect to intersection.
+        Returns false if SkIRect does not intersect r, and leaves SkIRect unchanged.
+
+        Returns false if either r or SkIRect is empty, leaving SkIRect unchanged.
+
+        @param r  limit of result
+        @return   true if r and SkIRect have area in common
+    */
+    bool intersect(const SkIRect& r) {
+        return this->intersect(*this, r);
+    }
+
+    /** Returns true if a intersects b, and sets SkIRect to intersection.
+        Returns false if a does not intersect b, and leaves SkIRect unchanged.
+
+        Returns false if either a or b is empty, leaving SkIRect unchanged.
+
+        @param a  SkIRect to intersect
+        @param b  SkIRect to intersect
+        @return   true if a and b have area in common
+    */
+    bool SK_WARN_UNUSED_RESULT intersect(const SkIRect& a, const SkIRect& b);
+
+    /** Returns true if a intersects b.
+        Returns false if either a or b is empty, or do not intersect.
+
+        @param a  SkIRect to intersect
+        @param b  SkIRect to intersect
+        @return   true if a and b have area in common
+    */
+    static bool Intersects(const SkIRect& a, const SkIRect& b) {
+        return SkIRect{}.intersect(a, b);
+    }
+
+    /** Sets SkIRect to the union of itself and r.
+
+     Has no effect if r is empty. Otherwise, if SkIRect is empty, sets SkIRect to r.
+
+     @param r  expansion SkIRect
+
+        example: https://fiddle.skia.org/c/@IRect_join_2
+     */
+    void join(const SkIRect& r);
+
+    /** Swaps fLeft and fRight if fLeft is greater than fRight; and swaps
+        fTop and fBottom if fTop is greater than fBottom. Result may be empty,
+        and width() and height() will be zero or positive.
+    */
+    void sort() {
+        using std::swap;
+        if (fLeft > fRight) {
+            swap(fLeft, fRight);
+        }
+        if (fTop > fBottom) {
+            swap(fTop, fBottom);
+        }
+    }
+
+    /** Returns SkIRect with fLeft and fRight swapped if fLeft is greater than fRight; and
+        with fTop and fBottom swapped if fTop is greater than fBottom. Result may be empty;
+        and width() and height() will be zero or positive.
+
+        @return  sorted SkIRect
+    */
+    SkIRect makeSorted() const {
+        return MakeLTRB(std::min(fLeft, fRight), std::min(fTop, fBottom),
+                        std::max(fLeft, fRight), std::max(fTop, fBottom));
+    }
+};
+
+/** \struct SkRect
+    SkRect holds four SkScalar coordinates describing the upper and
+    lower bounds of a rectangle. SkRect may be created from outer bounds or
+    from position, width, and height. SkRect describes an area; if its right
+    is less than or equal to its left, or if its bottom is less than or equal to
+    its top, it is considered empty.
+*/
+struct SK_API SkRect {
+    SkScalar fLeft;   //!< smaller x-axis bounds
+    SkScalar fTop;    //!< smaller y-axis bounds
+    SkScalar fRight;  //!< larger x-axis bounds
+    SkScalar fBottom; //!< larger y-axis bounds
+
+    /** Returns constructed SkRect set to (0, 0, 0, 0).
+        Many other rectangles are empty; if left is equal to or greater than right,
+        or if top is equal to or greater than bottom. Setting all members to zero
+        is a convenience, but does not designate a special empty rectangle.
+
+        @return  bounds (0, 0, 0, 0)
+    */
+    static constexpr SkRect SK_WARN_UNUSED_RESULT MakeEmpty() {
+        return SkRect{0, 0, 0, 0};
+    }
+
+    /** Returns constructed SkRect set to SkScalar values (0, 0, w, h). Does not
+        validate input; w or h may be negative.
+
+        Passing integer values may generate a compiler warning since SkRect cannot
+        represent 32-bit integers exactly. Use SkIRect for an exact integer rectangle.
+
+        @param w  SkScalar width of constructed SkRect
+        @param h  SkScalar height of constructed SkRect
+        @return   bounds (0, 0, w, h)
+    */
+    static constexpr SkRect SK_WARN_UNUSED_RESULT MakeWH(SkScalar w, SkScalar h) {
+        return SkRect{0, 0, w, h};
+    }
+
+    /** Returns constructed SkRect set to integer values (0, 0, w, h). Does not validate
+        input; w or h may be negative.
+
+        Use to avoid a compiler warning that input may lose precision when stored.
+        Use SkIRect for an exact integer rectangle.
+
+        @param w  integer width of constructed SkRect
+        @param h  integer height of constructed SkRect
+        @return   bounds (0, 0, w, h)
+    */
+    static SkRect SK_WARN_UNUSED_RESULT MakeIWH(int w, int h) {
+        return {0, 0, SkIntToScalar(w), SkIntToScalar(h)};
+    }
+
+    /** Returns constructed SkRect set to (0, 0, size.width(), size.height()). Does not
+        validate input; size.width() or size.height() may be negative.
+
+        @param size  SkScalar values for SkRect width and height
+        @return      bounds (0, 0, size.width(), size.height())
+    */
+    static constexpr SkRect SK_WARN_UNUSED_RESULT MakeSize(const SkSize& size) {
+        return SkRect{0, 0, size.fWidth, size.fHeight};
+    }
+
+    /** Returns constructed SkRect set to (l, t, r, b). Does not sort input; SkRect may
+        result in fLeft greater than fRight, or fTop greater than fBottom.
+
+        @param l  SkScalar stored in fLeft
+        @param t  SkScalar stored in fTop
+        @param r  SkScalar stored in fRight
+        @param b  SkScalar stored in fBottom
+        @return   bounds (l, t, r, b)
+    */
+    static constexpr SkRect SK_WARN_UNUSED_RESULT MakeLTRB(SkScalar l, SkScalar t, SkScalar r,
+                                                           SkScalar b) {
+        return SkRect {l, t, r, b};
+    }
+
+    /** Returns constructed SkRect set to (x, y, x + w, y + h).
+        Does not validate input; w or h may be negative.
+
+        @param x  stored in fLeft
+        @param y  stored in fTop
+        @param w  added to x and stored in fRight
+        @param h  added to y and stored in fBottom
+        @return   bounds at (x, y) with width w and height h
+    */
+    static constexpr SkRect SK_WARN_UNUSED_RESULT MakeXYWH(SkScalar x, SkScalar y, SkScalar w,
+                                                           SkScalar h) {
+        return SkRect {x, y, x + w, y + h};
+    }
+
+    /** Returns constructed SkIRect set to (0, 0, size.width(), size.height()).
+        Does not validate input; size.width() or size.height() may be negative.
+
+        @param size  integer values for SkRect width and height
+        @return      bounds (0, 0, size.width(), size.height())
+    */
+    static SkRect Make(const SkISize& size) {
+        return MakeIWH(size.width(), size.height());
+    }
+
+    /** Returns constructed SkIRect set to irect, promoting integers to scalar.
+        Does not validate input; fLeft may be greater than fRight, fTop may be greater
+        than fBottom.
+
+        @param irect  integer unsorted bounds
+        @return       irect members converted to SkScalar
+    */
+    static SkRect SK_WARN_UNUSED_RESULT Make(const SkIRect& irect) {
+        return {
+            SkIntToScalar(irect.fLeft), SkIntToScalar(irect.fTop),
+            SkIntToScalar(irect.fRight), SkIntToScalar(irect.fBottom)
+        };
+    }
+
+    /** Returns true if fLeft is equal to or greater than fRight, or if fTop is equal
+        to or greater than fBottom. Call sort() to reverse rectangles with negative
+        width() or height().
+
+        @return  true if width() or height() are zero or negative
+    */
+    bool isEmpty() const {
+        // We write it as the NOT of a non-empty rect, so we will return true if any values
+        // are NaN.
+        return !(fLeft < fRight && fTop < fBottom);
+    }
+
+    /** Returns true if fLeft is equal to or less than fRight, or if fTop is equal
+        to or less than fBottom. Call sort() to reverse rectangles with negative
+        width() or height().
+
+        @return  true if width() or height() are zero or positive
+    */
+    bool isSorted() const { return fLeft <= fRight && fTop <= fBottom; }
+
+    /** Returns true if all values in the rectangle are finite: SK_ScalarMin or larger,
+        and SK_ScalarMax or smaller.
+
+        @return  true if no member is infinite or NaN
+    */
+    bool isFinite() const {
+        float accum = 0;
+        accum *= fLeft;
+        accum *= fTop;
+        accum *= fRight;
+        accum *= fBottom;
+
+        // accum is either NaN or it is finite (zero).
+        SkASSERT(0 == accum || SkScalarIsNaN(accum));
+
+        // value==value will be true iff value is not NaN
+        // TODO: is it faster to say !accum or accum==accum?
+        return !SkScalarIsNaN(accum);
+    }
+
+    /** Returns left edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid.
+        Call sort() to reverse fLeft and fRight if needed.
+
+        @return  fLeft
+    */
+    constexpr SkScalar x() const { return fLeft; }
+
+    /** Returns top edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid,
+        and sort() to reverse fTop and fBottom if needed.
+
+        @return  fTop
+    */
+    constexpr SkScalar y() const { return fTop; }
+
+    /** Returns left edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid.
+        Call sort() to reverse fLeft and fRight if needed.
+
+        @return  fLeft
+    */
+    constexpr SkScalar left() const { return fLeft; }
+
+    /** Returns top edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid,
+        and sort() to reverse fTop and fBottom if needed.
+
+        @return  fTop
+    */
+    constexpr SkScalar top() const { return fTop; }
+
+    /** Returns right edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid.
+        Call sort() to reverse fLeft and fRight if needed.
+
+        @return  fRight
+    */
+    constexpr SkScalar right() const { return fRight; }
+
+    /** Returns bottom edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid,
+        and sort() to reverse fTop and fBottom if needed.
+
+        @return  fBottom
+    */
+    constexpr SkScalar bottom() const { return fBottom; }
+
+    /** Returns span on the x-axis. This does not check if SkRect is sorted, or if
+        result fits in 32-bit float; result may be negative or infinity.
+
+        @return  fRight minus fLeft
+    */
+    constexpr SkScalar width() const { return fRight - fLeft; }
+
+    /** Returns span on the y-axis. This does not check if SkRect is sorted, or if
+        result fits in 32-bit float; result may be negative or infinity.
+
+        @return  fBottom minus fTop
+    */
+    constexpr SkScalar height() const { return fBottom - fTop; }
+
+    /** Returns average of left edge and right edge. Result does not change if SkRect
+        is sorted. Result may overflow to infinity if SkRect is far from the origin.
+
+        @return  midpoint on x-axis
+    */
+    SkScalar centerX() const {
+        // don't use SkScalarHalf(fLeft + fBottom) as that might overflow before the 0.5
+        return SkScalarHalf(fLeft) + SkScalarHalf(fRight);
+    }
+
+    /** Returns average of top edge and bottom edge. Result does not change if SkRect
+        is sorted.
+
+        @return  midpoint on y-axis
+    */
+    SkScalar centerY() const {
+        // don't use SkScalarHalf(fTop + fBottom) as that might overflow before the 0.5
+        return SkScalarHalf(fTop) + SkScalarHalf(fBottom);
+    }
+
+    /** Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are
+        equal to the corresponding members in b.
+
+        a and b are not equal if either contain NaN. a and b are equal if members
+        contain zeroes with different signs.
+
+        @param a  SkRect to compare
+        @param b  SkRect to compare
+        @return   true if members are equal
+    */
+    friend bool operator==(const SkRect& a, const SkRect& b) {
+        return SkScalarsEqual((const SkScalar*)&a, (const SkScalar*)&b, 4);
+    }
+
+    /** Returns true if any in a: fLeft, fTop, fRight, and fBottom; does not
+        equal the corresponding members in b.
+
+        a and b are not equal if either contain NaN. a and b are equal if members
+        contain zeroes with different signs.
+
+        @param a  SkRect to compare
+        @param b  SkRect to compare
+        @return   true if members are not equal
+    */
+    friend bool operator!=(const SkRect& a, const SkRect& b) {
+        return !SkScalarsEqual((const SkScalar*)&a, (const SkScalar*)&b, 4);
+    }
+
+    /** Returns four points in quad that enclose SkRect ordered as: top-left, top-right,
+        bottom-right, bottom-left.
+
+        TODO: Consider adding parameter to control whether quad is clockwise or counterclockwise.
+
+        @param quad  storage for corners of SkRect
+
+        example: https://fiddle.skia.org/c/@Rect_toQuad
+    */
+    void toQuad(SkPoint quad[4]) const;
+
+    /** Sets SkRect to (0, 0, 0, 0).
+
+        Many other rectangles are empty; if left is equal to or greater than right,
+        or if top is equal to or greater than bottom. Setting all members to zero
+        is a convenience, but does not designate a special empty rectangle.
+    */
+    void setEmpty() { *this = MakeEmpty(); }
+
+    /** Sets SkRect to src, promoting src members from integer to scalar.
+        Very large values in src may lose precision.
+
+        @param src  integer SkRect
+    */
+    void set(const SkIRect& src) {
+        fLeft   = SkIntToScalar(src.fLeft);
+        fTop    = SkIntToScalar(src.fTop);
+        fRight  = SkIntToScalar(src.fRight);
+        fBottom = SkIntToScalar(src.fBottom);
+    }
+
+    /** Sets SkRect to (left, top, right, bottom).
+        left and right are not sorted; left is not necessarily less than right.
+        top and bottom are not sorted; top is not necessarily less than bottom.
+
+        @param left    stored in fLeft
+        @param top     stored in fTop
+        @param right   stored in fRight
+        @param bottom  stored in fBottom
+    */
+    void setLTRB(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom) {
+        fLeft   = left;
+        fTop    = top;
+        fRight  = right;
+        fBottom = bottom;
+    }
+
+    /** Sets to bounds of SkPoint array with count entries. If count is zero or smaller,
+        or if SkPoint array contains an infinity or NaN, sets to (0, 0, 0, 0).
+
+        Result is either empty or sorted: fLeft is less than or equal to fRight, and
+        fTop is less than or equal to fBottom.
+
+        @param pts    SkPoint array
+        @param count  entries in array
+    */
+    void setBounds(const SkPoint pts[], int count) {
+        (void)this->setBoundsCheck(pts, count);
+    }
+
+    /** Sets to bounds of SkPoint array with count entries. Returns false if count is
+        zero or smaller, or if SkPoint array contains an infinity or NaN; in these cases
+        sets SkRect to (0, 0, 0, 0).
+
+        Result is either empty or sorted: fLeft is less than or equal to fRight, and
+        fTop is less than or equal to fBottom.
+
+        @param pts    SkPoint array
+        @param count  entries in array
+        @return       true if all SkPoint values are finite
+
+        example: https://fiddle.skia.org/c/@Rect_setBoundsCheck
+    */
+    bool setBoundsCheck(const SkPoint pts[], int count);
+
+    /** Sets to bounds of SkPoint pts array with count entries. If any SkPoint in pts
+        contains infinity or NaN, all SkRect dimensions are set to NaN.
+
+        @param pts    SkPoint array
+        @param count  entries in array
+
+        example: https://fiddle.skia.org/c/@Rect_setBoundsNoCheck
+    */
+    void setBoundsNoCheck(const SkPoint pts[], int count);
+
+    /** Sets bounds to the smallest SkRect enclosing SkPoint p0 and p1. The result is
+        sorted and may be empty. Does not check to see if values are finite.
+
+        @param p0  corner to include
+        @param p1  corner to include
+    */
+    void set(const SkPoint& p0, const SkPoint& p1) {
+        fLeft =   std::min(p0.fX, p1.fX);
+        fRight =  std::max(p0.fX, p1.fX);
+        fTop =    std::min(p0.fY, p1.fY);
+        fBottom = std::max(p0.fY, p1.fY);
+    }
+
+    /** Sets SkRect to (x, y, x + width, y + height).
+        Does not validate input; width or height may be negative.
+
+        @param x       stored in fLeft
+        @param y       stored in fTop
+        @param width   added to x and stored in fRight
+        @param height  added to y and stored in fBottom
+    */
+    void setXYWH(SkScalar x, SkScalar y, SkScalar width, SkScalar height) {
+        fLeft = x;
+        fTop = y;
+        fRight = x + width;
+        fBottom = y + height;
+    }
+
+    /** Sets SkRect to (0, 0, width, height). Does not validate input;
+        width or height may be negative.
+
+        @param width   stored in fRight
+        @param height  stored in fBottom
+    */
+    void setWH(SkScalar width, SkScalar height) {
+        fLeft = 0;
+        fTop = 0;
+        fRight = width;
+        fBottom = height;
+    }
+    void setIWH(int32_t width, int32_t height) {
+        this->setWH(SkIntToScalar(width), SkIntToScalar(height));
+    }
+
+    /** Returns SkRect offset by (dx, dy).
+
+        If dx is negative, SkRect returned is moved to the left.
+        If dx is positive, SkRect returned is moved to the right.
+        If dy is negative, SkRect returned is moved upward.
+        If dy is positive, SkRect returned is moved downward.
+
+        @param dx  added to fLeft and fRight
+        @param dy  added to fTop and fBottom
+        @return    SkRect offset on axes, with original width and height
+    */
+    constexpr SkRect makeOffset(SkScalar dx, SkScalar dy) const {
+        return MakeLTRB(fLeft + dx, fTop + dy, fRight + dx, fBottom + dy);
+    }
+
+    /** Returns SkRect offset by v.
+
+        @param v  added to rect
+        @return    SkRect offset on axes, with original width and height
+    */
+    constexpr SkRect makeOffset(SkVector v) const { return this->makeOffset(v.x(), v.y()); }
+
+    /** Returns SkRect, inset by (dx, dy).
+
+        If dx is negative, SkRect returned is wider.
+        If dx is positive, SkRect returned is narrower.
+        If dy is negative, SkRect returned is taller.
+        If dy is positive, SkRect returned is shorter.
+
+        @param dx  added to fLeft and subtracted from fRight
+        @param dy  added to fTop and subtracted from fBottom
+        @return    SkRect inset symmetrically left and right, top and bottom
+    */
+    SkRect makeInset(SkScalar dx, SkScalar dy) const {
+        return MakeLTRB(fLeft + dx, fTop + dy, fRight - dx, fBottom - dy);
+    }
+
+    /** Returns SkRect, outset by (dx, dy).
+
+        If dx is negative, SkRect returned is narrower.
+        If dx is positive, SkRect returned is wider.
+        If dy is negative, SkRect returned is shorter.
+        If dy is positive, SkRect returned is taller.
+
+        @param dx  subtracted to fLeft and added from fRight
+        @param dy  subtracted to fTop and added from fBottom
+        @return    SkRect outset symmetrically left and right, top and bottom
+    */
+    SkRect makeOutset(SkScalar dx, SkScalar dy) const {
+        return MakeLTRB(fLeft - dx, fTop - dy, fRight + dx, fBottom + dy);
+    }
+
+    /** Offsets SkRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom.
+
+        If dx is negative, moves SkRect to the left.
+        If dx is positive, moves SkRect to the right.
+        If dy is negative, moves SkRect upward.
+        If dy is positive, moves SkRect downward.
+
+        @param dx  offset added to fLeft and fRight
+        @param dy  offset added to fTop and fBottom
+    */
+    void offset(SkScalar dx, SkScalar dy) {
+        fLeft   += dx;
+        fTop    += dy;
+        fRight  += dx;
+        fBottom += dy;
+    }
+
+    /** Offsets SkRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to
+        fTop, fBottom.
+
+        If delta.fX is negative, moves SkRect to the left.
+        If delta.fX is positive, moves SkRect to the right.
+        If delta.fY is negative, moves SkRect upward.
+        If delta.fY is positive, moves SkRect downward.
+
+        @param delta  added to SkRect
+    */
+    void offset(const SkPoint& delta) {
+        this->offset(delta.fX, delta.fY);
+    }
+
+    /** Offsets SkRect so that fLeft equals newX, and fTop equals newY. width and height
+        are unchanged.
+
+        @param newX  stored in fLeft, preserving width()
+        @param newY  stored in fTop, preserving height()
+    */
+    void offsetTo(SkScalar newX, SkScalar newY) {
+        fRight += newX - fLeft;
+        fBottom += newY - fTop;
+        fLeft = newX;
+        fTop = newY;
+    }
+
+    /** Insets SkRect by (dx, dy).
+
+        If dx is positive, makes SkRect narrower.
+        If dx is negative, makes SkRect wider.
+        If dy is positive, makes SkRect shorter.
+        If dy is negative, makes SkRect taller.
+
+        @param dx  added to fLeft and subtracted from fRight
+        @param dy  added to fTop and subtracted from fBottom
+    */
+    void inset(SkScalar dx, SkScalar dy)  {
+        fLeft   += dx;
+        fTop    += dy;
+        fRight  -= dx;
+        fBottom -= dy;
+    }
+
+    /** Outsets SkRect by (dx, dy).
+
+        If dx is positive, makes SkRect wider.
+        If dx is negative, makes SkRect narrower.
+        If dy is positive, makes SkRect taller.
+        If dy is negative, makes SkRect shorter.
+
+        @param dx  subtracted to fLeft and added from fRight
+        @param dy  subtracted to fTop and added from fBottom
+    */
+    void outset(SkScalar dx, SkScalar dy)  { this->inset(-dx, -dy); }
+
+    /** Returns true if SkRect intersects r, and sets SkRect to intersection.
+        Returns false if SkRect does not intersect r, and leaves SkRect unchanged.
+
+        Returns false if either r or SkRect is empty, leaving SkRect unchanged.
+
+        @param r  limit of result
+        @return   true if r and SkRect have area in common
+
+        example: https://fiddle.skia.org/c/@Rect_intersect
+    */
+    bool intersect(const SkRect& r);
+
+    /** Returns true if a intersects b, and sets SkRect to intersection.
+        Returns false if a does not intersect b, and leaves SkRect unchanged.
+
+        Returns false if either a or b is empty, leaving SkRect unchanged.
+
+        @param a  SkRect to intersect
+        @param b  SkRect to intersect
+        @return   true if a and b have area in common
+    */
+    bool SK_WARN_UNUSED_RESULT intersect(const SkRect& a, const SkRect& b);
+
+
+private:
+    static bool Intersects(SkScalar al, SkScalar at, SkScalar ar, SkScalar ab,
+                           SkScalar bl, SkScalar bt, SkScalar br, SkScalar bb) {
+        SkScalar L = std::max(al, bl);
+        SkScalar R = std::min(ar, br);
+        SkScalar T = std::max(at, bt);
+        SkScalar B = std::min(ab, bb);
+        return L < R && T < B;
+    }
+
+public:
+
+    /** Returns true if SkRect intersects r.
+     Returns false if either r or SkRect is empty, or do not intersect.
+
+     @param r  SkRect to intersect
+     @return   true if r and SkRect have area in common
+     */
+    bool intersects(const SkRect& r) const {
+        return Intersects(fLeft, fTop, fRight, fBottom,
+                          r.fLeft, r.fTop, r.fRight, r.fBottom);
+    }
+
+    /** Returns true if a intersects b.
+        Returns false if either a or b is empty, or do not intersect.
+
+        @param a  SkRect to intersect
+        @param b  SkRect to intersect
+        @return   true if a and b have area in common
+    */
+    static bool Intersects(const SkRect& a, const SkRect& b) {
+        return Intersects(a.fLeft, a.fTop, a.fRight, a.fBottom,
+                          b.fLeft, b.fTop, b.fRight, b.fBottom);
+    }
+
+    /** Sets SkRect to the union of itself and r.
+
+        Has no effect if r is empty. Otherwise, if SkRect is empty, sets
+        SkRect to r.
+
+        @param r  expansion SkRect
+
+        example: https://fiddle.skia.org/c/@Rect_join_2
+    */
+    void join(const SkRect& r);
+
+    /** Sets SkRect to the union of itself and r.
+
+        Asserts if r is empty and SK_DEBUG is defined.
+        If SkRect is empty, sets SkRect to r.
+
+        May produce incorrect results if r is empty.
+
+        @param r  expansion SkRect
+    */
+    void joinNonEmptyArg(const SkRect& r) {
+        SkASSERT(!r.isEmpty());
+        // if we are empty, just assign
+        if (fLeft >= fRight || fTop >= fBottom) {
+            *this = r;
+        } else {
+            this->joinPossiblyEmptyRect(r);
+        }
+    }
+
+    /** Sets SkRect to the union of itself and the construction.
+
+        May produce incorrect results if SkRect or r is empty.
+
+        @param r  expansion SkRect
+    */
+    void joinPossiblyEmptyRect(const SkRect& r) {
+        fLeft   = std::min(fLeft, r.left());
+        fTop    = std::min(fTop, r.top());
+        fRight  = std::max(fRight, r.right());
+        fBottom = std::max(fBottom, r.bottom());
+    }
+
+    /** Returns true if: fLeft <= x < fRight && fTop <= y < fBottom.
+        Returns false if SkRect is empty.
+
+        @param x  test SkPoint x-coordinate
+        @param y  test SkPoint y-coordinate
+        @return   true if (x, y) is inside SkRect
+    */
+    bool contains(SkScalar x, SkScalar y) const {
+        return x >= fLeft && x < fRight && y >= fTop && y < fBottom;
+    }
+
+    /** Returns true if SkRect contains r.
+        Returns false if SkRect is empty or r is empty.
+
+        SkRect contains r when SkRect area completely includes r area.
+
+        @param r  SkRect contained
+        @return   true if all sides of SkRect are outside r
+    */
+    bool contains(const SkRect& r) const {
+        // todo: can we eliminate the this->isEmpty check?
+        return  !r.isEmpty() && !this->isEmpty() &&
+                fLeft <= r.fLeft && fTop <= r.fTop &&
+                fRight >= r.fRight && fBottom >= r.fBottom;
+    }
+
+    /** Returns true if SkRect contains r.
+        Returns false if SkRect is empty or r is empty.
+
+        SkRect contains r when SkRect area completely includes r area.
+
+        @param r  SkIRect contained
+        @return   true if all sides of SkRect are outside r
+    */
+    bool contains(const SkIRect& r) const {
+        // todo: can we eliminate the this->isEmpty check?
+        return  !r.isEmpty() && !this->isEmpty() &&
+                fLeft <= SkIntToScalar(r.fLeft) && fTop <= SkIntToScalar(r.fTop) &&
+                fRight >= SkIntToScalar(r.fRight) && fBottom >= SkIntToScalar(r.fBottom);
+    }
+
+    /** Sets SkIRect by adding 0.5 and discarding the fractional portion of SkRect
+        members, using (SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop),
+                        SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)).
+
+        @param dst  storage for SkIRect
+    */
+    void round(SkIRect* dst) const {
+        SkASSERT(dst);
+        dst->setLTRB(SkScalarRoundToInt(fLeft),  SkScalarRoundToInt(fTop),
+                     SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom));
+    }
+
+    /** Sets SkIRect by discarding the fractional portion of fLeft and fTop; and rounding
+        up fRight and fBottom, using
+        (SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop),
+         SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)).
+
+        @param dst  storage for SkIRect
+    */
+    void roundOut(SkIRect* dst) const {
+        SkASSERT(dst);
+        dst->setLTRB(SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop),
+                     SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom));
+    }
+
+    /** Sets SkRect by discarding the fractional portion of fLeft and fTop; and rounding
+        up fRight and fBottom, using
+        (SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop),
+         SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)).
+
+        @param dst  storage for SkRect
+    */
+    void roundOut(SkRect* dst) const {
+        dst->setLTRB(SkScalarFloorToScalar(fLeft), SkScalarFloorToScalar(fTop),
+                     SkScalarCeilToScalar(fRight), SkScalarCeilToScalar(fBottom));
+    }
+
+    /** Sets SkRect by rounding up fLeft and fTop; and discarding the fractional portion
+        of fRight and fBottom, using
+        (SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop),
+         SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)).
+
+        @param dst  storage for SkIRect
+    */
+    void roundIn(SkIRect* dst) const {
+        SkASSERT(dst);
+        dst->setLTRB(SkScalarCeilToInt(fLeft),   SkScalarCeilToInt(fTop),
+                     SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom));
+    }
+
+    /** Returns SkIRect by adding 0.5 and discarding the fractional portion of SkRect
+        members, using (SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop),
+                        SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)).
+
+        @return  rounded SkIRect
+    */
+    SkIRect round() const {
+        SkIRect ir;
+        this->round(&ir);
+        return ir;
+    }
+
+    /** Sets SkIRect by discarding the fractional portion of fLeft and fTop; and rounding
+        up fRight and fBottom, using
+        (SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop),
+         SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)).
+
+        @return  rounded SkIRect
+    */
+    SkIRect roundOut() const {
+        SkIRect ir;
+        this->roundOut(&ir);
+        return ir;
+    }
+    /** Sets SkIRect by rounding up fLeft and fTop; and discarding the fractional portion
+        of fRight and fBottom, using
+        (SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop),
+         SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)).
+
+        @return  rounded SkIRect
+    */
+    SkIRect roundIn() const {
+        SkIRect ir;
+        this->roundIn(&ir);
+        return ir;
+    }
+
+    /** Swaps fLeft and fRight if fLeft is greater than fRight; and swaps
+        fTop and fBottom if fTop is greater than fBottom. Result may be empty;
+        and width() and height() will be zero or positive.
+    */
+    void sort() {
+        using std::swap;
+        if (fLeft > fRight) {
+            swap(fLeft, fRight);
+        }
+
+        if (fTop > fBottom) {
+            swap(fTop, fBottom);
+        }
+    }
+
+    /** Returns SkRect with fLeft and fRight swapped if fLeft is greater than fRight; and
+        with fTop and fBottom swapped if fTop is greater than fBottom. Result may be empty;
+        and width() and height() will be zero or positive.
+
+        @return  sorted SkRect
+    */
+    SkRect makeSorted() const {
+        return MakeLTRB(std::min(fLeft, fRight), std::min(fTop, fBottom),
+                        std::max(fLeft, fRight), std::max(fTop, fBottom));
+    }
+
+    /** Returns pointer to first scalar in SkRect, to treat it as an array with four
+        entries.
+
+        @return  pointer to fLeft
+    */
+    const SkScalar* asScalars() const { return &fLeft; }
+
+    /** Writes text representation of SkRect to standard output. Set asHex to true to
+        generate exact binary representations of floating point numbers.
+
+        @param asHex  true if SkScalar values are written as hexadecimal
+
+        example: https://fiddle.skia.org/c/@Rect_dump
+    */
+    void dump(bool asHex) const;
+
+    /** Writes text representation of SkRect to standard output. The representation may be
+        directly compiled as C++ code. Floating point values are written
+        with limited precision; it may not be possible to reconstruct original SkRect
+        from output.
+    */
+    void dump() const { this->dump(false); }
+
+    /** Writes text representation of SkRect to standard output. The representation may be
+        directly compiled as C++ code. Floating point values are written
+        in hexadecimal to preserve their exact bit pattern. The output reconstructs the
+        original SkRect.
+
+        Use instead of dump() when submitting
+    */
+    void dumpHex() const { this->dump(true); }
+};
+
+inline bool SkIRect::contains(const SkRect& r) const {
+    return  !r.isEmpty() && !this->isEmpty() &&     // check for empties
+            (SkScalar)fLeft <= r.fLeft && (SkScalar)fTop <= r.fTop &&
+            (SkScalar)fRight >= r.fRight && (SkScalar)fBottom >= r.fBottom;
+}
+
+#endif