@shopify/react-native-skia 0.0.135

package/src/skia/types/Path/Path.ts

@@ -0,0 +1,564 @@
+import type { SkRect } from "../Rect";
+import type { SkPoint } from "../Point";
+import type { SkRRect } from "../RRect";
+import type { StrokeJoin, StrokeCap } from "../Paint";
+import type { SkMatrix } from "../Matrix";
+import type { SkJSIInstance } from "../JsiInstance";
+
+/**
+ * Options used for Path.stroke(). If an option is omitted, a sensible default will be used.
+ */
+export interface StrokeOpts {
+  /** The width of the stroked lines. */
+  width?: number;
+  // eslint-disable-next-line camelcase
+  miter_limit?: number;
+  /**
+   * if > 1, increase precision, else if (0 < resScale < 1) reduce precision to
+   * favor speed and size
+   */
+  precision?: number;
+  join?: StrokeJoin;
+  cap?: StrokeCap;
+}
+
+export enum FillType {
+  Winding,
+  EvenOdd,
+  InverseWinding,
+  InverseEvenOdd,
+}
+
+export enum PathOp {
+  Difference, //!< subtract the op path from the first path
+  Intersect, //!< intersect the two paths
+  Union, //!< union (inclusive-or) the two paths
+  XOR, //!< exclusive-or the two paths
+  ReverseDifference,
+}
+
+export enum PathVerb {
+  Move,
+  Line,
+  Quad,
+  Conic,
+  Cubic,
+  Close,
+}
+
+export type PathCommand = number[];
+
+export const isPath = (obj: SkJSIInstance<string> | null): obj is SkPath =>
+  obj !== null && obj.__typename__ === "Path";
+
+export interface SkPath extends SkJSIInstance<"Path"> {
+  /**
+   * Appends arc to Path, as the start of new contour. Arc added is part of ellipse
+   * bounded by oval, from startAngle through sweepAngle. Both startAngle and
+   * sweepAngle are measured in degrees, where zero degrees is aligned with the
+   * positive x-axis, and positive sweeps extends arc clockwise.
+   * Returns the modified path for easier chaining.
+   * @param oval
+   * @param startAngle
+   * @param sweepAngle
+   */
+  addArc(
+    oval: SkRect,
+    startAngleInDegrees: number,
+    sweepAngleInDegrees: number
+  ): SkPath;
+
+  /**
+   * Adds oval to Path, appending kMove_Verb, four kConic_Verb, and kClose_Verb.
+   * Oval is upright ellipse bounded by Rect oval with radii equal to half oval width
+   * and half oval height. Oval begins at start and continues clockwise by default.
+   * Returns the modified path for easier chaining.
+   * @param oval
+   * @param isCCW - if the path should be drawn counter-clockwise or not
+   * @param startIndex - index of initial point of ellipse
+   */
+  addOval(oval: SkRect, isCCW?: boolean, startIndex?: number): SkPath;
+
+  /**
+   * Returns the number of points in this path. Initially zero.
+   */
+  countPoints(): number;
+
+  /**
+   * Adds contour created from array of n points, adding (count - 1) line segments.
+   * Contour added starts at pts[0], then adds a line for every additional point
+   * in pts array. If close is true, appends kClose_Verb to Path, connecting
+   * pts[count - 1] and pts[0].
+   * Returns the modified path for easier chaining.
+   * @param points
+   * @param close - if true, will add a line connecting last point to the first point.
+   */
+  addPoly(points: SkPoint[], close: boolean): SkPath;
+
+  /** Adds beginning of contour at SkPoint (x, y).
+
+        @param x  x-axis value of contour start
+        @param y  y-axis value of contour start
+        @return   reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_moveTo
+    */
+  moveTo(x: number, y: number): SkPath;
+  /** Adds line from last point to (x, y). If SkPath is empty, or last SkPath::Verb is
+        kClose_Verb, last point is set to (0, 0) before adding line.
+
+        lineTo() appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed.
+        lineTo() then appends kLine_Verb to verb array and (x, y) to SkPoint array.
+
+        @param x  end of added line on x-axis
+        @param y  end of added line on y-axis
+        @return   reference to SkPath
+
+        example: https://fiddle.skia.org/c/@Path_lineTo
+    */
+  lineTo(x: number, y: number): SkPath;
+
+  /**
+   * Returns a new path that covers the same area as the original path, but with the
+   * Winding FillType. This may re-draw some contours in the path as counter-clockwise
+   * instead of clockwise to achieve that effect. If such a transformation cannot
+   * be done, null is returned.
+   */
+  makeAsWinding(): SkPath | null;
+
+  /**
+   * Translates all the points in the path by dx, dy.
+   * @param dx
+   * @param dy
+   */
+  offset(dx: number, dy: number): SkPath;
+
+  /**
+   * Relative version of arcToRotated.
+   * @param rx
+   * @param ry
+   * @param xAxisRotate
+   * @param useSmallArc
+   * @param isCCW
+   * @param dx
+   * @param dy
+   */
+  rArcTo(
+    rx: number,
+    ry: number,
+    xAxisRotateInDegrees: number,
+    useSmallArc: boolean,
+    isCCW: boolean,
+    dx: number,
+    dy: number
+  ): SkPath;
+
+  /**
+   * Relative version of conicTo.
+   * @param dx1
+   * @param dy1
+   * @param dx2
+   * @param dy2
+   * @param w
+   */
+  rConicTo(
+    dx1: number,
+    dy1: number,
+    dx2: number,
+    dy2: number,
+    w: number
+  ): SkPath;
+
+  /**
+   * Relative version of cubicTo.
+   * @param cpx1
+   * @param cpy1
+   * @param cpx2
+   * @param cpy2
+   * @param x
+   * @param y
+   */
+  rCubicTo(
+    cpx1: number,
+    cpy1: number,
+    cpx2: number,
+    cpy2: number,
+    x: number,
+    y: number
+  ): SkPath;
+
+  /**
+   * Relative version of moveTo.
+   * @param x
+   * @param y
+   */
+  rMoveTo(x: number, y: number): SkPath;
+
+  /**
+   * Relative version of lineTo.
+   * @param x
+   * @param y
+   */
+  rLineTo(x: number, y: number): SkPath;
+
+  /**
+   * Relative version of quadTo.
+   * @param x1
+   * @param y1
+   * @param x2
+   * @param y2
+   */
+  rQuadTo(x1: number, y1: number, x2: number, y2: number): SkPath;
+
+  /**
+   * Sets FillType, the rule used to fill Path.
+   * @param fill
+   */
+  setFillType(fill: FillType): void;
+
+  /**
+   * Specifies whether Path is volatile; whether it will be altered or discarded
+   * by the caller after it is drawn. Path by default have volatile set false.
+   *
+   * Mark animating or temporary paths as volatile to improve performance.
+   * Mark unchanging Path non-volatile to improve repeated rendering.
+   * @param volatile
+   */
+  setIsVolatile(volatile: boolean): void;
+
+  /**
+   * Turns this path into the filled equivalent of the stroked path. Returns false if the operation
+   * fails (e.g. the path is a hairline).
+   * @param opts - describe how stroked path should look.
+   * If such a transformation cannot be done, null is returned.
+   */
+  stroke(opts?: StrokeOpts): null | SkPath;
+
+  /**
+   * Appends CLOSE_VERB to Path. A closed contour connects the first and last point
+   * with a line, forming a continuous loop.
+   */
+  close(): void;
+
+  /**
+   * Sets Path to its initial state.
+   * Removes verb array, point array, and weights, and sets FillType to Winding.
+   * Internal storage associated with Path is released
+   */
+  reset(): void;
+
+  /**
+   * Sets Path to its initial state.
+   * Removes verb array, point array, and weights, and sets FillType to Winding.
+   * Internal storage associated with Path is *not* released.
+   * Use rewind() instead of reset() if Path storage will be reused and performance
+   * is critical.
+   */
+  rewind(): void;
+
+  /**
+   * Returns minimum and maximum axes values of the lines and curves in Path.
+   * Returns (0, 0, 0, 0) if Path contains no points.
+   * Returned bounds width and height may be larger or smaller than area affected
+   * when Path is drawn.
+   *
+   * Behaves identically to getBounds() when Path contains
+   * only lines. If Path contains curves, computed bounds includes
+   * the maximum extent of the quad, conic, or cubic; is slower than getBounds();
+   * and unlike getBounds(), does not cache the result.
+   */
+  computeTightBounds(): SkRect;
+
+  /**
+   * Appends arc to Path. Arc added is part of ellipse
+   * bounded by oval, from startAngle through sweepAngle. Both startAngle and
+   * sweepAngle are measured in degrees, where zero degrees is aligned with the
+   * positive x-axis, and positive sweeps extends arc clockwise.
+   * Returns the modified path for easier chaining.
+   * @param oval
+   * @param startAngleInDegrees
+   * @param sweepAngleInDegrees
+   * @param forceMoveTo
+   */
+  arcToOval(
+    oval: SkRect,
+    startAngleInDegrees: number,
+    sweepAngleInDegrees: number,
+    forceMoveTo: boolean
+  ): SkPath;
+
+  /**
+   * Appends arc to Path. Arc is implemented by one or more conics weighted to
+   * describe part of oval with radii (rx, ry) rotated by xAxisRotate degrees. Arc
+   * curves from last Path Point to (x, y), choosing one of four possible routes:
+   * clockwise or counterclockwise, and smaller or larger. See SkPath.h for more details.
+   * Returns the modified path for easier chaining.
+   * @param rx
+   * @param ry
+   * @param xAxisRotate
+   * @param useSmallArc
+   * @param isCCW
+   * @param x
+   * @param y
+   */
+  arcToRotated(
+    rx: number,
+    ry: number,
+    xAxisRotateInDegrees: number,
+    useSmallArc: boolean,
+    isCCW: boolean,
+    x: number,
+    y: number
+  ): SkPath;
+
+  /**
+   * Appends arc to Path, after appending line if needed. Arc is implemented by conic
+   * weighted to describe part of circle. Arc is contained by tangent from
+   * last Path point to (x1, y1), and tangent from (x1, y1) to (x2, y2). Arc
+   * is part of circle sized to radius, positioned so it touches both tangent lines.
+   * Returns the modified path for easier chaining.
+   * @param x1
+   * @param y1
+   * @param x2
+   * @param y2
+   * @param radius
+   */
+  arcToTangent(
+    x1: number,
+    y1: number,
+    x2: number,
+    y2: number,
+    radius: number
+  ): SkPath;
+
+  /**
+   * Adds conic from last point towards (x1, y1), to (x2, y2), weighted by w.
+   * If Path is empty, or path is closed, the last point is set to (0, 0)
+   * before adding conic.
+   * Returns the modified path for easier chaining.
+   * @param x1
+   * @param y1
+   * @param x2
+   * @param y2
+   * @param w
+   */
+  conicTo(x1: number, y1: number, x2: number, y2: number, w: number): SkPath;
+
+  /**
+   * Returns true if the point (x, y) is contained by Path, taking into
+   * account FillType.
+   * @param x
+   * @param y
+   */
+  contains(x: number, y: number): boolean;
+
+  /**
+   * Returns a copy of this Path.
+   */
+  copy(): SkPath;
+
+  /**
+   *  Adds cubic from last point towards (x1, y1), then towards (x2, y2), ending at
+   * (x3, y3). If Path is empty, or path is closed, the last point is set to
+   * (0, 0) before adding cubic.
+   * @param cpx1
+   * @param cpy1
+   * @param cpx2
+   * @param cpy2
+   * @param x
+   * @param y
+   */
+  cubicTo(
+    cpx1: number,
+    cpy1: number,
+    cpx2: number,
+    cpy2: number,
+    x: number,
+    y: number
+  ): SkPath;
+
+  /**
+   * Changes this path to be the dashed version of itself. This is the same effect as creating
+   * a DashPathEffect and calling filterPath on this path.
+   * @param on
+   * @param off
+   * @param phase
+   */
+  dash(on: number, off: number, phase: number): boolean;
+
+  /**
+   * Returns true if other path is equal to this path.
+   * @param other
+   */
+  equals(other: SkPath): boolean;
+
+  /**
+   * Returns minimum and maximum axes values of Point array.
+   * Returns (0, 0, 0, 0) if Path contains no points. Returned bounds width and height may
+   * be larger or smaller than area affected when Path is drawn.
+   */
+  getBounds(): SkRect;
+
+  /**
+   * Return the FillType for this path.
+   */
+  getFillType(): FillType;
+
+  /**
+   Adds quad from last point towards (x1, y1), to (x2, y2).
+
+   If SkPath is empty, or last SkPath::Verb is kClose_Verb, last point is set to (0, 0) before adding quad.
+
+   Appends kMove_Verb to verb array and (0, 0) to SkPoint array, if needed; then appends kQuad_Verb to verb array;
+   and (x1, y1), (x2, y2) to SkPoint array.
+
+   Parameters
+   x1	control SkPoint of quad on x-axis
+   y1	control SkPoint of quad on y-axis
+   x2	end SkPoint of quad on x-axis
+   y2	end SkPoint of quad on y-axis
+   Returns
+   reference to SkPath
+   example: https://fiddle.skia.org/c/@Path_quadTo
+  */
+  quadTo(x1: number, y1: number, x2: number, y2: number): void;
+
+  /**
+   * Adds Rect to Path, appending kMove_Verb, three kLine_Verb, and kClose_Verb,
+   * starting with top-left corner of Rect; followed by top-right, bottom-right,
+   * and bottom-left if isCCW is false; or followed by bottom-left,
+   * bottom-right, and top-right if isCCW is true.
+   * Returns the modified path for easier chaining.
+   * @param rect
+   * @param isCCW
+   */
+  addRect(rect: SkRect, isCCW?: boolean): void;
+
+  /**
+   * Adds rrect to Path, creating a new closed contour.
+   * Returns the modified path for easier chaining.
+   * @param rrect
+   * @param isCCW
+   */
+  addRRect(rrect: SkRRect, isCCW?: boolean): SkPath;
+
+  /**
+   * Returns the Point at index in Point array. Valid range for index is
+   * 0 to countPoints() - 1.
+   * @param index
+   */
+  getPoint(index: number): SkPoint;
+
+  /**
+   * Returns true if there are no verbs in the path.
+   */
+  isEmpty(): boolean;
+
+  /**
+   * Returns true if the path is volatile; it will not be altered or discarded
+   * by the caller after it is drawn. Path by default have volatile set false, allowing
+   * Surface to attach a cache of data which speeds repeated drawing. If true, Surface
+   * may not speed repeated drawing.
+   */
+  isVolatile(): boolean;
+
+  /** Adds circle centered at (x, y) of size radius to SkPath, appending kMove_Verb,
+      four kConic_Verb, and kClose_Verb. Circle begins at: (x + radius, y), continuing
+      clockwise if dir is kCW_Direction, and counterclockwise if dir is kCCW_Direction.
+
+      Has no effect if radius is zero or negative.
+
+      @param x       center of circle
+      @param y       center of circle
+      @param radius  distance from center to edge      
+      @return        reference to SkPath
+  */
+  addCircle(x: number, y: number, r: number): SkPath;
+
+  getLastPt(): { x: number; y: number };
+
+  /** Set this path to the result of applying the Op to this path and the
+    specified path: this = (this op operand).
+    The resulting path will be constructed from non-overlapping contours.
+    The curve order is reduced where possible so that cubics may be turned
+    into quadratics, and quadratics maybe turned into lines.
+
+    Returns true if operation was able to produce a result;
+    otherwise, result is unmodified.
+
+    @param path The second path (for difference, the subtrahend)
+    @param op The operator to apply.
+    @param result The product of the operands. The result may be one of the
+                  inputs.
+    @return True if the operation succeeded.
+    */
+  op(path: SkPath, op: PathOp): boolean;
+
+  /** Set this path to a set of non-overlapping contours that describe the
+    same area as the original path.
+    The curve order is reduced where possible so that cubics may
+    be turned into quadratics, and quadratics maybe turned into lines.
+
+    Returns true if operation was able to produce a result;
+    otherwise, result is unmodified.
+
+    @param result The simplified path. The result may be the input.
+    @return True if simplification succeeded.
+  */
+  simplify(): boolean;
+
+  /**
+   * Returns this path as an SVG string.
+   */
+  toSVGString(): string;
+
+  /**
+   * Take start and stop "t" values (values between 0...1), and modify this path such that
+   * it is a subset of the original path.
+   * The trim values apply to the entire path, so if it contains several contours, all of them
+   * are including in the calculation.
+   * Null is returned if either input value is NaN.
+   * @param startT - a value in the range [0.0, 1.0]. 0.0 is the beginning of the path.
+   * @param stopT  - a value in the range [0.0, 1.0]. 1.0 is the end of the path.
+   * @param isComplement
+   */
+  trim(startT: number, stopT: number, isComplement: boolean): null | SkPath;
+
+  /**
+   * Transforms the path by the specified matrix.
+   */
+  transform(m3: SkMatrix): void;
+
+  /**
+   * Interpolates between Path with point array of equal size.
+   * Copy verb array and weights to result, and set result path to a weighted
+   * average of this path array and ending path.
+
+   *  weight is most useful when between zero (ending path) and
+      one (this path); will work with values outside of this
+      range.
+
+   * interpolate() returns undefined if path is not
+   * the same size as ending path. Call isInterpolatable() to check Path
+   * compatibility prior to calling interpolate().
+
+   * @param ending  path to interpolate with
+   * @param weight  contribution of this path, and
+   *                 one minus contribution of ending path
+   * @return        Path replaced by interpolated averages or null if 
+   *                not interpolatable
+   * */
+  interpolate(end: SkPath, weight: number): SkPath | null;
+
+  /** Returns true if Path contain equal verbs and equal weights.
+   *     @param compare  path to compare
+   *     @return         true if Path can be interpolated equivalent
+   *
+   * */
+  isInterpolatable(compare: SkPath): boolean;
+
+  /**
+   * Serializes the contents of this path as a series of commands.
+   */
+  toCmds(): PathCommand[];
+}

package/src/skia/types/Path/PathFactory.ts

@@ -0,0 +1,34 @@
+import type { SkFont } from "../Font";
+
+import type { SkPath, PathOp, PathCommand } from "./Path";
+
+export interface PathFactory {
+  Make(): SkPath;
+  /**
+   * Creates a new path from the provided SVG string. If this fails, null will be
+   * returned instead.
+   * @param str
+   */
+  MakeFromSVGString(str: string): SkPath | null;
+
+  /**
+   * Creates a new path by combining the given paths according to op. If this fails, null will
+   * be returned instead.
+   * @param one
+   * @param two
+   * @param op
+   */
+  MakeFromOp(one: SkPath, two: SkPath, op: PathOp): SkPath | null;
+
+  /**
+   * Creates a new path from the given list of path commands. If this fails, null will be
+   * returned instead.
+   * @param cmds
+   */
+  MakeFromCmds(cmds: PathCommand[]): SkPath | null;
+
+  /**
+   * Converts the text to a path with the given font at location x / y.
+   */
+  MakeFromText(text: string, x: number, y: number, font: SkFont): SkPath | null;
+}

package/src/skia/types/Path/index.ts

@@ -0,0 +1,2 @@
+export * from "./Path";
+export * from "./PathFactory";

package/src/skia/types/PathEffect.ts

@@ -0,0 +1,97 @@
+import type { SkJSIInstance } from "./JsiInstance";
+import type { SkPath } from "./Path/Path";
+import type { SkMatrix } from "./Matrix";
+
+export type SkPathEffect = SkJSIInstance<"PathEffect">;
+
+export const isPathEffect = (
+  obj: SkJSIInstance<string> | null
+): obj is SkPathEffect => obj !== null && obj.__typename__ === "PathEffect";
+
+export enum Path1DEffectStyle {
+  Translate,
+  Rotate,
+  Morph,
+}
+
+export interface PathEffectFactory {
+  /**
+   * Returns a PathEffect that can turn sharp corners into rounded corners.
+   * @param radius - if <=0, returns null
+   */
+  MakeCorner(radius: number): SkPathEffect | null;
+
+  /**
+   * Returns a PathEffect that add dashes to the path.
+   *
+   * See SkDashPathEffect.h for more details.
+   *
+   * @param intervals - even number of entries with even indicies specifying the length of
+   *                    the "on" intervals, and the odd indices specifying the length of "off".
+   * @param phase - offset length into the intervals array. Defaults to 0.
+   */
+  MakeDash(intervals: number[], phase?: number): SkPathEffect;
+
+  /**
+   * Returns a PathEffect that breaks path into segments of segLength length, and randomly move
+   * the endpoints away from the original path by a maximum of deviation.
+   * @param segLength - length of the subsegments.
+   * @param dev - limit of the movement of the endpoints.
+   * @param seedAssist - modifies the randomness. See SkDiscretePathEffect.h for more.
+   */
+  MakeDiscrete(
+    segLength: number,
+    dev: number,
+    seedAssist: number
+  ): SkPathEffect;
+
+  /**
+   *
+   * A pathEffect whose effect is to apply first the inner pathEffect and the the
+   * outer pathEffect (i.e. outer(inner(path))).
+   *
+   */
+  MakeCompose(outer: SkPathEffect, inner: SkPathEffect): SkPathEffect;
+
+  /**
+   *
+   * A pathEffect pathEffect whose effect is to apply two effects,
+   * in sequence (i.e. first(path) + second(path)).
+   *
+   */
+  MakeSum(outer: SkPathEffect, inner: SkPathEffect): SkPathEffect;
+
+  /**
+   * Returns a PathEffect that will fill the drawing path with a pattern made by applying
+   * the given matrix to a repeating set of infinitely long lines of the given width.
+   * For example, the scale of the provided matrix will determine how far apart the lines
+   * should be drawn its rotation affects the lines' orientation.
+   * @param width - must be >= 0
+   * @param matrix
+   */
+  MakeLine2D(width: number, matrix: SkMatrix): SkPathEffect | null;
+
+  /**
+   * Returns a PathEffect which implements dashing by replicating the specified path.
+   *   @param path The path to replicate (dash)
+   *   @param advance The space between instances of path
+   *   @param phase distance (mod advance) along path for its initial position
+   *   @param style how to transform path at each point (based on the current
+   *                position and tangent)
+   */
+  MakePath1D(
+    path: SkPath,
+    advance: number,
+    phase: number,
+    style: Path1DEffectStyle
+  ): SkPathEffect | null;
+
+  /**
+   * Returns a PathEffect that will fill the drawing path with a pattern by repeating the
+   * given path according to the provided matrix. For example, the scale of the matrix
+   * determines how far apart the path instances should be drawn.
+   * @param matrix
+   * @param path
+   */
+  MakePath2D(matrix: SkMatrix, path: SkPath): SkPathEffect | null;
+}