@rubix0270/arboris 1.0.1 → 1.0.3

package/prisma/skills/continuous-learning-v2/agents/session-guardian.sh

@@ -1,150 +0,0 @@
-#!/usr/bin/env bash
-# session-guardian.sh — Observer session guard
-# Exit 0 = proceed. Exit 1 = skip this observer cycle.
-# Called by observer-loop.sh before spawning any Claude session.
-#
-# Config (env vars, all optional):
-#   OBSERVER_INTERVAL_SECONDS    default: 300   (per-project cooldown)
-#   OBSERVER_LAST_RUN_LOG        default: ~/.claude/observer-last-run.log
-#   OBSERVER_ACTIVE_HOURS_START  default: 800   (8:00 AM local, set to 0 to disable)
-#   OBSERVER_ACTIVE_HOURS_END    default: 2300  (11:00 PM local, set to 0 to disable)
-#   OBSERVER_MAX_IDLE_SECONDS    default: 1800  (30 min; set to 0 to disable)
-#
-# Gate execution order (cheapest first):
-#   Gate 1: Time window check    (~0ms, string comparison)
-#   Gate 2: Project cooldown log (~1ms, file read + mkdir lock)
-#   Gate 3: Idle detection       (~5-50ms, OS syscall; fail open)
-
-set -euo pipefail
-
-INTERVAL="${OBSERVER_INTERVAL_SECONDS:-300}"
-LOG_PATH="${OBSERVER_LAST_RUN_LOG:-$HOME/.claude/observer-last-run.log}"
-ACTIVE_START="${OBSERVER_ACTIVE_HOURS_START:-800}"
-ACTIVE_END="${OBSERVER_ACTIVE_HOURS_END:-2300}"
-MAX_IDLE="${OBSERVER_MAX_IDLE_SECONDS:-1800}"
-
-# ── Gate 1: Time Window ───────────────────────────────────────────────────────
-# Skip observer cycles outside configured active hours (local system time).
-# Uses HHMM integer comparison. Works on BSD date (macOS) and GNU date (Linux).
-# Supports overnight windows such as 2200-0600.
-# Set both ACTIVE_START and ACTIVE_END to 0 to disable this gate.
-if [ "$ACTIVE_START" -ne 0 ] || [ "$ACTIVE_END" -ne 0 ]; then
-  current_hhmm=$(date +%k%M | tr -d ' ')
-  current_hhmm_num=$(( 10#${current_hhmm:-0} ))
-  active_start_num=$(( 10#${ACTIVE_START:-800} ))
-  active_end_num=$(( 10#${ACTIVE_END:-2300} ))
-
-  within_active_hours=0
-  if [ "$active_start_num" -lt "$active_end_num" ]; then
-    if [ "$current_hhmm_num" -ge "$active_start_num" ] && [ "$current_hhmm_num" -lt "$active_end_num" ]; then
-      within_active_hours=1
-    fi
-  else
-    if [ "$current_hhmm_num" -ge "$active_start_num" ] || [ "$current_hhmm_num" -lt "$active_end_num" ]; then
-      within_active_hours=1
-    fi
-  fi
-
-  if [ "$within_active_hours" -ne 1 ]; then
-    echo "session-guardian: outside active hours (${current_hhmm}, window ${ACTIVE_START}-${ACTIVE_END})" >&2
-    exit 1
-  fi
-fi
-
-# ── Gate 2: Project Cooldown Log ─────────────────────────────────────────────
-# Prevent the same project being observed faster than OBSERVER_INTERVAL_SECONDS.
-# Key: PROJECT_DIR when provided by the observer, otherwise git root path.
-# Uses mkdir-based lock for safe concurrent access. Skips the cycle on lock contention.
-# stderr uses basename only — never prints the full absolute path.
-
-project_root="${PROJECT_DIR:-}"
-if [ -z "$project_root" ] || [ ! -d "$project_root" ]; then
-  project_root="$(git rev-parse --show-toplevel 2>/dev/null || echo "$PWD")"
-fi
-project_name="$(basename "$project_root")"
-now="$(date +%s)"
-
-mkdir -p "$(dirname "$LOG_PATH")" || {
-  echo "session-guardian: cannot create log dir, proceeding" >&2
-  exit 0
-}
-
-_lock_dir="${LOG_PATH}.lock"
-if ! mkdir "$_lock_dir" 2>/dev/null; then
-  # Another observer holds the lock — skip this cycle to avoid double-spawns
-  echo "session-guardian: log locked by concurrent process, skipping cycle" >&2
-  exit 1
-else
-  trap 'rm -rf "$_lock_dir"' EXIT INT TERM
-
-  last_spawn=0
-  last_spawn=$(awk -F '\t' -v key="$project_root" '$1 == key { value = $2 } END { if (value != "") print value }' "$LOG_PATH" 2>/dev/null) || true
-  last_spawn="${last_spawn:-0}"
-  [[ "$last_spawn" =~ ^[0-9]+$ ]] || last_spawn=0
-
-  elapsed=$(( now - last_spawn ))
-  if [ "$elapsed" -lt "$INTERVAL" ]; then
-    rm -rf "$_lock_dir"
-    trap - EXIT INT TERM
-    echo "session-guardian: cooldown active for '${project_name}' (last spawn ${elapsed}s ago, interval ${INTERVAL}s)" >&2
-    exit 1
-  fi
-
-  # Update log: remove old entry for this project, append new timestamp (tab-delimited)
-  tmp_log="$(mktemp "$(dirname "$LOG_PATH")/observer-last-run.XXXXXX")"
-  awk -F '\t' -v key="$project_root" '$1 != key' "$LOG_PATH" > "$tmp_log" 2>/dev/null || true
-  printf '%s\t%s\n' "$project_root" "$now" >> "$tmp_log"
-  mv "$tmp_log" "$LOG_PATH"
-
-  rm -rf "$_lock_dir"
-  trap - EXIT INT TERM
-fi
-
-# ── Gate 3: Idle Detection ────────────────────────────────────────────────────
-# Skip cycles when no user input received for too long. Fail open if idle time
-# cannot be determined (Linux without xprintidle, headless, unknown OS).
-# Set OBSERVER_MAX_IDLE_SECONDS=0 to disable this gate.
-
-get_idle_seconds() {
-  local _raw
-  case "$(uname -s)" in
-    Darwin)
-      _raw=$( { /usr/sbin/ioreg -c IOHIDSystem \
-        | /usr/bin/awk '/HIDIdleTime/ {print int($NF/1000000000); exit}'; } \
-        2>/dev/null ) || true
-      printf '%s\n' "${_raw:-0}" | head -n1
-      ;;
-    Linux)
-      if command -v xprintidle >/dev/null 2>&1; then
-        _raw=$(xprintidle 2>/dev/null) || true
-        echo $(( ${_raw:-0} / 1000 ))
-      else
-        echo 0  # fail open: xprintidle not installed
-      fi
-      ;;
-    *MINGW*|*MSYS*|*CYGWIN*)
-      _raw=$(powershell.exe -NoProfile -NonInteractive -Command \
-        "try { \
-          Add-Type -MemberDefinition '[DllImport(\"user32.dll\")] public static extern bool GetLastInputInfo(ref LASTINPUTINFO p); [StructLayout(LayoutKind.Sequential)] public struct LASTINPUTINFO { public uint cbSize; public int dwTime; }' -Name WinAPI -Namespace PInvoke; \
-          \$l = New-Object PInvoke.WinAPI+LASTINPUTINFO; \$l.cbSize = 8; \
-          [PInvoke.WinAPI]::GetLastInputInfo([ref]\$l) | Out-Null; \
-          [int][Math]::Max(0, [long]([Environment]::TickCount - [long]\$l.dwTime) / 1000) \
-        } catch { 0 }" \
-        2>/dev/null | tr -d '\r') || true
-      printf '%s\n' "${_raw:-0}" | head -n1
-      ;;
-    *)
-      echo 0  # fail open: unknown platform
-      ;;
-  esac
-}
-
-if [ "$MAX_IDLE" -gt 0 ]; then
-  idle_seconds=$(get_idle_seconds)
-  if [ "$idle_seconds" -gt "$MAX_IDLE" ]; then
-    echo "session-guardian: user idle ${idle_seconds}s (threshold ${MAX_IDLE}s), skipping" >&2
-    exit 1
-  fi
-fi
-
-exit 0

package/prisma/skills/continuous-learning-v2/agents/start-observer.sh

@@ -1,248 +0,0 @@
-#!/bin/bash
-# Continuous Learning v2 - Observer Agent Launcher
-#
-# Starts the background observer agent that analyzes observations
-# and creates instincts. Uses Haiku model for cost efficiency.
-#
-# v2.1: Project-scoped — detects current project and analyzes
-#       project-specific observations into project-scoped instincts.
-#
-# Usage:
-#   start-observer.sh              # Start observer for current project (or global)
-#   start-observer.sh --reset      # Clear lock and restart observer for current project
-#   start-observer.sh stop         # Stop running observer
-#   start-observer.sh status       # Check if observer is running
-
-set -e
-
-# NOTE: set -e is disabled inside the background subshell below
-# to prevent claude CLI failures from killing the observer loop.
-
-# ─────────────────────────────────────────────
-# Project detection
-# ─────────────────────────────────────────────
-
-SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
-SKILL_ROOT="$(cd "$SCRIPT_DIR/.." && pwd)"
-OBSERVER_LOOP_SCRIPT="${SCRIPT_DIR}/observer-loop.sh"
-
-# Source shared project detection helper
-# This sets: PROJECT_ID, PROJECT_NAME, PROJECT_ROOT, PROJECT_DIR
-source "${SKILL_ROOT}/scripts/detect-project.sh"
-PYTHON_CMD="${CLV2_PYTHON_CMD:-}"
-
-# ─────────────────────────────────────────────
-# Configuration
-# ─────────────────────────────────────────────
-
-# shellcheck disable=SC1091
-. "${SKILL_ROOT}/scripts/lib/homunculus-dir.sh"
-CONFIG_DIR="$(_ecc_resolve_homunculus_dir)"
-if [ -n "${CLV2_CONFIG:-}" ]; then
-  CONFIG_FILE="$CLV2_CONFIG"
-elif [ -f "${CONFIG_DIR}/config.json" ]; then
-  CONFIG_FILE="${CONFIG_DIR}/config.json"
-else
-  CONFIG_FILE="${SKILL_ROOT}/config.json"
-fi
-# PID file is project-scoped so each project can have its own observer
-PID_FILE="${PROJECT_DIR}/.observer.pid"
-LOG_FILE="${PROJECT_DIR}/observer.log"
-OBSERVATIONS_FILE="${PROJECT_DIR}/observations.jsonl"
-INSTINCTS_DIR="${PROJECT_DIR}/instincts/personal"
-SENTINEL_FILE="${CLV2_OBSERVER_SENTINEL_FILE:-${PROJECT_ROOT:-$PROJECT_DIR}/.observer.lock}"
-
-write_guard_sentinel() {
-  printf '%s\n' 'observer paused: confirmation or permission prompt detected; rerun start-observer.sh --reset after reviewing observer.log' > "$SENTINEL_FILE"
-}
-
-stop_observer_if_running() {
-  if [ -f "$PID_FILE" ]; then
-    pid=$(cat "$PID_FILE")
-    if kill -0 "$pid" 2>/dev/null; then
-      echo "Stopping observer for ${PROJECT_NAME} (PID: $pid)..."
-      kill "$pid"
-      rm -f "$PID_FILE"
-      echo "Observer stopped."
-      return 0
-    fi
-
-    echo "Observer not running (stale PID file)."
-    rm -f "$PID_FILE"
-    return 1
-  fi
-
-  echo "Observer not running."
-  return 1
-}
-
-# Read config values from config.json
-OBSERVER_INTERVAL_MINUTES=5
-MIN_OBSERVATIONS=20
-OBSERVER_ENABLED=false
-if [ -f "$CONFIG_FILE" ]; then
-  if [ -z "$PYTHON_CMD" ]; then
-    echo "No python interpreter found; using built-in observer defaults." >&2
-  else
-    _config=$(CLV2_CONFIG="$CONFIG_FILE" "$PYTHON_CMD" -c "
-import json, os
-with open(os.environ['CLV2_CONFIG']) as f:
-    cfg = json.load(f)
-obs = cfg.get('observer', {})
-print(obs.get('run_interval_minutes', 5))
-print(obs.get('min_observations_to_analyze', 20))
-print(str(obs.get('enabled', False)).lower())
-" 2>/dev/null || echo "5
-20
-false")
-    _interval=$(echo "$_config" | sed -n '1p')
-    _min_obs=$(echo "$_config" | sed -n '2p')
-    _enabled=$(echo "$_config" | sed -n '3p')
-    if [ "$_interval" -gt 0 ] 2>/dev/null; then
-      OBSERVER_INTERVAL_MINUTES="$_interval"
-    fi
-    if [ "$_min_obs" -gt 0 ] 2>/dev/null; then
-      MIN_OBSERVATIONS="$_min_obs"
-    fi
-    if [ "$_enabled" = "true" ]; then
-      OBSERVER_ENABLED=true
-    fi
-  fi
-fi
-OBSERVER_INTERVAL_SECONDS=$((OBSERVER_INTERVAL_MINUTES * 60))
-
-echo "Project: ${PROJECT_NAME} (${PROJECT_ID})"
-echo "Storage: ${PROJECT_DIR}"
-
-# Windows/Git-Bash detection (Issue #295)
-UNAME_LOWER="$(uname -s 2>/dev/null | tr '[:upper:]' '[:lower:]')"
-IS_WINDOWS=false
-case "$UNAME_LOWER" in
-  *mingw*|*msys*|*cygwin*) IS_WINDOWS=true ;;
-esac
-
-ACTION="start"
-RESET_OBSERVER=false
-
-for arg in "$@"; do
-  case "$arg" in
-    start|stop|status)
-      ACTION="$arg"
-      ;;
-    --reset)
-      RESET_OBSERVER=true
-      ;;
-    *)
-      echo "Usage: $0 [start|stop|status] [--reset]"
-      exit 1
-      ;;
-  esac
-done
-
-if [ "$RESET_OBSERVER" = "true" ]; then
-  rm -f "$SENTINEL_FILE"
-fi
-
-case "$ACTION" in
-  stop)
-    stop_observer_if_running || true
-    exit 0
-    ;;
-
-  status)
-    if [ -f "$PID_FILE" ]; then
-      pid=$(cat "$PID_FILE")
-      if kill -0 "$pid" 2>/dev/null; then
-        echo "Observer is running (PID: $pid)"
-        echo "Log: $LOG_FILE"
-        echo "Observations: $(wc -l < "$OBSERVATIONS_FILE" 2>/dev/null || echo 0) lines"
-        # Also show instinct count
-        instinct_count=$(find "$INSTINCTS_DIR" -name "*.yaml" 2>/dev/null | wc -l)
-        echo "Instincts: $instinct_count"
-        exit 0
-      else
-        echo "Observer not running (stale PID file)"
-        rm -f "$PID_FILE"
-        exit 1
-      fi
-    else
-      echo "Observer not running"
-      exit 1
-    fi
-    ;;
-
-  start)
-    # Check if observer is disabled in config
-    if [ "$OBSERVER_ENABLED" != "true" ]; then
-      echo "Observer is disabled in config.json (observer.enabled: false)."
-      echo "Set observer.enabled to true in config.json to enable."
-      exit 1
-    fi
-
-    # Check if already running
-    if [ -f "$PID_FILE" ]; then
-      pid=$(cat "$PID_FILE")
-      if kill -0 "$pid" 2>/dev/null; then
-        echo "Observer already running for ${PROJECT_NAME} (PID: $pid)"
-        exit 0
-      fi
-      rm -f "$PID_FILE"
-    fi
-
-    echo "Starting observer agent for ${PROJECT_NAME}..."
-
-    if [ ! -x "$OBSERVER_LOOP_SCRIPT" ]; then
-      echo "Observer loop script not found or not executable: $OBSERVER_LOOP_SCRIPT"
-      exit 1
-    fi
-
-    mkdir -p "$PROJECT_DIR"
-    touch "$LOG_FILE"
-    start_line=$(wc -l < "$LOG_FILE" 2>/dev/null || echo 0)
-
-    nohup env \
-      CONFIG_DIR="$CONFIG_DIR" \
-      PID_FILE="$PID_FILE" \
-      LOG_FILE="$LOG_FILE" \
-      OBSERVATIONS_FILE="$OBSERVATIONS_FILE" \
-      INSTINCTS_DIR="$INSTINCTS_DIR" \
-      PROJECT_DIR="$PROJECT_DIR" \
-      PROJECT_NAME="$PROJECT_NAME" \
-      PROJECT_ID="$PROJECT_ID" \
-      MIN_OBSERVATIONS="$MIN_OBSERVATIONS" \
-      OBSERVER_INTERVAL_SECONDS="$OBSERVER_INTERVAL_SECONDS" \
-      CLV2_IS_WINDOWS="$IS_WINDOWS" \
-      CLV2_OBSERVER_PROMPT_PATTERN="$CLV2_OBSERVER_PROMPT_PATTERN" \
-      "$OBSERVER_LOOP_SCRIPT" >> "$LOG_FILE" 2>&1 &
-
-    # Wait for PID file
-    sleep 2
-
-    # Check for confirmation-seeking output in the observer log
-    if tail -n +"$((start_line + 1))" "$LOG_FILE" 2>/dev/null | grep -E -i -q "$CLV2_OBSERVER_PROMPT_PATTERN"; then
-      echo "OBSERVER_ABORT: Confirmation or permission prompt detected in observer output. Failing closed."
-      stop_observer_if_running >/dev/null 2>&1 || true
-      write_guard_sentinel
-      exit 2
-    fi
-
-    if [ -f "$PID_FILE" ]; then
-      pid=$(cat "$PID_FILE")
-      if kill -0 "$pid" 2>/dev/null; then
-        echo "Observer started (PID: $pid)"
-        echo "Log: $LOG_FILE"
-      else
-        echo "Failed to start observer (process died immediately, check $LOG_FILE)"
-        exit 1
-      fi
-    else
-      echo "Failed to start observer"
-      exit 1
-    fi
-    ;;
-
-  *)
-    echo "Usage: $0 [start|stop|status] [--reset]"
-    exit 1
-    ;;
-esac

package/prisma/skills/continuous-learning-v2/config.json

@@ -1,8 +0,0 @@
-{
-  "version": "2.1",
-  "observer": {
-    "enabled": false,
-    "run_interval_minutes": 5,
-    "min_observations_to_analyze": 20
-  }
-}