@point3/node-rdkafka 3.6.0-1

package/deps/librdkafka/src/opentelemetry/metrics.pb.h

@@ -0,0 +1,966 @@
+/* Automatically generated nanopb header */
+/* Generated by nanopb-0.4.8-dev */
+
+#ifndef PB_OPENTELEMETRY_PROTO_METRICS_V1_OPENTELEMETRY_PROTO_METRICS_V1_METRICS_PB_H_INCLUDED
+#define PB_OPENTELEMETRY_PROTO_METRICS_V1_OPENTELEMETRY_PROTO_METRICS_V1_METRICS_PB_H_INCLUDED
+#include <nanopb/pb.h>
+#include "opentelemetry/common.pb.h"
+#include "opentelemetry/resource.pb.h"
+
+#if PB_PROTO_HEADER_VERSION != 40
+#error Regenerate this file with the current version of nanopb generator.
+#endif
+
+/* Enum definitions */
+/* AggregationTemporality defines how a metric aggregator reports aggregated
+ values. It describes how those values relate to the time interval over
+ which they are aggregated. */
+typedef enum _opentelemetry_proto_metrics_v1_AggregationTemporality {
+    /* UNSPECIFIED is the default AggregationTemporality, it MUST not be used. */
+    opentelemetry_proto_metrics_v1_AggregationTemporality_AGGREGATION_TEMPORALITY_UNSPECIFIED = 0,
+    /* DELTA is an AggregationTemporality for a metric aggregator which reports
+ changes since last report time. Successive metrics contain aggregation of
+ values from continuous and non-overlapping intervals.
+
+ The values for a DELTA metric are based only on the time interval
+ associated with one measurement cycle. There is no dependency on
+ previous measurements like is the case for CUMULATIVE metrics.
+
+ For example, consider a system measuring the number of requests that
+ it receives and reports the sum of these requests every second as a
+ DELTA metric:
+
+   1. The system starts receiving at time=t_0.
+   2. A request is received, the system measures 1 request.
+   3. A request is received, the system measures 1 request.
+   4. A request is received, the system measures 1 request.
+   5. The 1 second collection cycle ends. A metric is exported for the
+      number of requests received over the interval of time t_0 to
+      t_0+1 with a value of 3.
+   6. A request is received, the system measures 1 request.
+   7. A request is received, the system measures 1 request.
+   8. The 1 second collection cycle ends. A metric is exported for the
+      number of requests received over the interval of time t_0+1 to
+      t_0+2 with a value of 2. */
+    opentelemetry_proto_metrics_v1_AggregationTemporality_AGGREGATION_TEMPORALITY_DELTA = 1,
+    /* CUMULATIVE is an AggregationTemporality for a metric aggregator which
+ reports changes since a fixed start time. This means that current values
+ of a CUMULATIVE metric depend on all previous measurements since the
+ start time. Because of this, the sender is required to retain this state
+ in some form. If this state is lost or invalidated, the CUMULATIVE metric
+ values MUST be reset and a new fixed start time following the last
+ reported measurement time sent MUST be used.
+
+ For example, consider a system measuring the number of requests that
+ it receives and reports the sum of these requests every second as a
+ CUMULATIVE metric:
+
+   1. The system starts receiving at time=t_0.
+   2. A request is received, the system measures 1 request.
+   3. A request is received, the system measures 1 request.
+   4. A request is received, the system measures 1 request.
+   5. The 1 second collection cycle ends. A metric is exported for the
+      number of requests received over the interval of time t_0 to
+      t_0+1 with a value of 3.
+   6. A request is received, the system measures 1 request.
+   7. A request is received, the system measures 1 request.
+   8. The 1 second collection cycle ends. A metric is exported for the
+      number of requests received over the interval of time t_0 to
+      t_0+2 with a value of 5.
+   9. The system experiences a fault and loses state.
+   10. The system recovers and resumes receiving at time=t_1.
+   11. A request is received, the system measures 1 request.
+   12. The 1 second collection cycle ends. A metric is exported for the
+      number of requests received over the interval of time t_1 to
+      t_0+1 with a value of 1.
+
+ Note: Even though, when reporting changes since last report time, using
+ CUMULATIVE is valid, it is not recommended. This may cause problems for
+ systems that do not use start_time to determine when the aggregation
+ value was reset (e.g. Prometheus). */
+    opentelemetry_proto_metrics_v1_AggregationTemporality_AGGREGATION_TEMPORALITY_CUMULATIVE = 2
+} opentelemetry_proto_metrics_v1_AggregationTemporality;
+
+/* DataPointFlags is defined as a protobuf 'uint32' type and is to be used as a
+ bit-field representing 32 distinct boolean flags.  Each flag defined in this
+ enum is a bit-mask.  To test the presence of a single flag in the flags of
+ a data point, for example, use an expression like:
+
+   (point.flags & DATA_POINT_FLAGS_NO_RECORDED_VALUE_MASK) == DATA_POINT_FLAGS_NO_RECORDED_VALUE_MASK */
+typedef enum _opentelemetry_proto_metrics_v1_DataPointFlags {
+    /* The zero value for the enum. Should not be used for comparisons.
+ Instead use bitwise "and" with the appropriate mask as shown above. */
+    opentelemetry_proto_metrics_v1_DataPointFlags_DATA_POINT_FLAGS_DO_NOT_USE = 0,
+    /* This DataPoint is valid but has no recorded value.  This value
+ SHOULD be used to reflect explicitly missing data in a series, as
+ for an equivalent to the Prometheus "staleness marker". */
+    opentelemetry_proto_metrics_v1_DataPointFlags_DATA_POINT_FLAGS_NO_RECORDED_VALUE_MASK = 1
+} opentelemetry_proto_metrics_v1_DataPointFlags;
+
+/* Struct definitions */
+/* MetricsData represents the metrics data that can be stored in a persistent
+ storage, OR can be embedded by other protocols that transfer OTLP metrics
+ data but do not implement the OTLP protocol.
+
+ The main difference between this message and collector protocol is that
+ in this message there will not be any "control" or "metadata" specific to
+ OTLP protocol.
+
+ When new fields are added into this message, the OTLP request MUST be updated
+ as well. */
+typedef struct _opentelemetry_proto_metrics_v1_MetricsData {
+    /* An array of ResourceMetrics.
+ For data coming from a single resource this array will typically contain
+ one element. Intermediary nodes that receive data from multiple origins
+ typically batch the data before forwarding further and in that case this
+ array will contain multiple elements. */
+    pb_callback_t resource_metrics;
+} opentelemetry_proto_metrics_v1_MetricsData;
+
+/* A collection of ScopeMetrics from a Resource. */
+typedef struct _opentelemetry_proto_metrics_v1_ResourceMetrics {
+    /* The resource for the metrics in this message.
+ If this field is not set then no resource info is known. */
+    bool has_resource;
+    opentelemetry_proto_resource_v1_Resource resource;
+    /* A list of metrics that originate from a resource. */
+    pb_callback_t scope_metrics;
+    /* This schema_url applies to the data in the "resource" field. It does not apply
+ to the data in the "scope_metrics" field which have their own schema_url field. */
+    pb_callback_t schema_url;
+} opentelemetry_proto_metrics_v1_ResourceMetrics;
+
+/* A collection of Metrics produced by an Scope. */
+typedef struct _opentelemetry_proto_metrics_v1_ScopeMetrics {
+    /* The instrumentation scope information for the metrics in this message.
+ Semantically when InstrumentationScope isn't set, it is equivalent with
+ an empty instrumentation scope name (unknown). */
+    bool has_scope;
+    opentelemetry_proto_common_v1_InstrumentationScope scope;
+    /* A list of metrics that originate from an instrumentation library. */
+    pb_callback_t metrics;
+    /* This schema_url applies to all metrics in the "metrics" field. */
+    pb_callback_t schema_url;
+} opentelemetry_proto_metrics_v1_ScopeMetrics;
+
+/* Gauge represents the type of a scalar metric that always exports the
+ "current value" for every data point. It should be used for an "unknown"
+ aggregation.
+
+ A Gauge does not support different aggregation temporalities. Given the
+ aggregation is unknown, points cannot be combined using the same
+ aggregation, regardless of aggregation temporalities. Therefore,
+ AggregationTemporality is not included. Consequently, this also means
+ "StartTimeUnixNano" is ignored for all data points. */
+typedef struct _opentelemetry_proto_metrics_v1_Gauge {
+    pb_callback_t data_points;
+} opentelemetry_proto_metrics_v1_Gauge;
+
+/* Sum represents the type of a scalar metric that is calculated as a sum of all
+ reported measurements over a time interval. */
+typedef struct _opentelemetry_proto_metrics_v1_Sum {
+    pb_callback_t data_points;
+    /* aggregation_temporality describes if the aggregator reports delta changes
+ since last report time, or cumulative changes since a fixed start time. */
+    opentelemetry_proto_metrics_v1_AggregationTemporality aggregation_temporality;
+    /* If "true" means that the sum is monotonic. */
+    bool is_monotonic;
+} opentelemetry_proto_metrics_v1_Sum;
+
+/* Histogram represents the type of a metric that is calculated by aggregating
+ as a Histogram of all reported measurements over a time interval. */
+typedef struct _opentelemetry_proto_metrics_v1_Histogram {
+    pb_callback_t data_points;
+    /* aggregation_temporality describes if the aggregator reports delta changes
+ since last report time, or cumulative changes since a fixed start time. */
+    opentelemetry_proto_metrics_v1_AggregationTemporality aggregation_temporality;
+} opentelemetry_proto_metrics_v1_Histogram;
+
+/* ExponentialHistogram represents the type of a metric that is calculated by aggregating
+ as a ExponentialHistogram of all reported double measurements over a time interval. */
+typedef struct _opentelemetry_proto_metrics_v1_ExponentialHistogram {
+    pb_callback_t data_points;
+    /* aggregation_temporality describes if the aggregator reports delta changes
+ since last report time, or cumulative changes since a fixed start time. */
+    opentelemetry_proto_metrics_v1_AggregationTemporality aggregation_temporality;
+} opentelemetry_proto_metrics_v1_ExponentialHistogram;
+
+/* Summary metric data are used to convey quantile summaries,
+ a Prometheus (see: https://prometheus.io/docs/concepts/metric_types/#summary)
+ and OpenMetrics (see: https://github.com/OpenObservability/OpenMetrics/blob/4dbf6075567ab43296eed941037c12951faafb92/protos/prometheus.proto#L45)
+ data type. These data points cannot always be merged in a meaningful way.
+ While they can be useful in some applications, histogram data points are
+ recommended for new applications. */
+typedef struct _opentelemetry_proto_metrics_v1_Summary {
+    pb_callback_t data_points;
+} opentelemetry_proto_metrics_v1_Summary;
+
+/* Defines a Metric which has one or more timeseries.  The following is a
+ brief summary of the Metric data model.  For more details, see:
+
+   https://github.com/open-telemetry/opentelemetry-specification/blob/main/specification/metrics/data-model.md
+
+
+ The data model and relation between entities is shown in the
+ diagram below. Here, "DataPoint" is the term used to refer to any
+ one of the specific data point value types, and "points" is the term used
+ to refer to any one of the lists of points contained in the Metric.
+
+ - Metric is composed of a metadata and data.
+ - Metadata part contains a name, description, unit.
+ - Data is one of the possible types (Sum, Gauge, Histogram, Summary).
+ - DataPoint contains timestamps, attributes, and one of the possible value type
+   fields.
+
+     Metric
+  +------------+
+  |name        |
+  |description |
+  |unit        |     +------------------------------------+
+  |data        |---> |Gauge, Sum, Histogram, Summary, ... |
+  +------------+     +------------------------------------+
+
+    Data [One of Gauge, Sum, Histogram, Summary, ...]
+  +-----------+
+  |...        |  // Metadata about the Data.
+  |points     |--+
+  +-----------+  |
+                 |      +---------------------------+
+                 |      |DataPoint 1                |
+                 v      |+------+------+   +------+ |
+              +-----+   ||label |label |...|label | |
+              |  1  |-->||value1|value2|...|valueN| |
+              +-----+   |+------+------+   +------+ |
+              |  .  |   |+-----+                    |
+              |  .  |   ||value|                    |
+              |  .  |   |+-----+                    |
+              |  .  |   +---------------------------+
+              |  .  |                   .
+              |  .  |                   .
+              |  .  |                   .
+              |  .  |   +---------------------------+
+              |  .  |   |DataPoint M                |
+              +-----+   |+------+------+   +------+ |
+              |  M  |-->||label |label |...|label | |
+              +-----+   ||value1|value2|...|valueN| |
+                        |+------+------+   +------+ |
+                        |+-----+                    |
+                        ||value|                    |
+                        |+-----+                    |
+                        +---------------------------+
+
+ Each distinct type of DataPoint represents the output of a specific
+ aggregation function, the result of applying the DataPoint's
+ associated function of to one or more measurements.
+
+ All DataPoint types have three common fields:
+ - Attributes includes key-value pairs associated with the data point
+ - TimeUnixNano is required, set to the end time of the aggregation
+ - StartTimeUnixNano is optional, but strongly encouraged for DataPoints
+   having an AggregationTemporality field, as discussed below.
+
+ Both TimeUnixNano and StartTimeUnixNano values are expressed as
+ UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January 1970.
+
+ # TimeUnixNano
+
+ This field is required, having consistent interpretation across
+ DataPoint types.  TimeUnixNano is the moment corresponding to when
+ the data point's aggregate value was captured.
+
+ Data points with the 0 value for TimeUnixNano SHOULD be rejected
+ by consumers.
+
+ # StartTimeUnixNano
+
+ StartTimeUnixNano in general allows detecting when a sequence of
+ observations is unbroken.  This field indicates to consumers the
+ start time for points with cumulative and delta
+ AggregationTemporality, and it should be included whenever possible
+ to support correct rate calculation.  Although it may be omitted
+ when the start time is truly unknown, setting StartTimeUnixNano is
+ strongly encouraged. */
+typedef struct _opentelemetry_proto_metrics_v1_Metric {
+    /* name of the metric, including its DNS name prefix. It must be unique. */
+    pb_callback_t name;
+    /* description of the metric, which can be used in documentation. */
+    pb_callback_t description;
+    /* unit in which the metric value is reported. Follows the format
+ described by http://unitsofmeasure.org/ucum.html. */
+    pb_callback_t unit;
+    pb_callback_t cb_data;
+    pb_size_t which_data;
+    union {
+        opentelemetry_proto_metrics_v1_Gauge gauge;
+        opentelemetry_proto_metrics_v1_Sum sum;
+        opentelemetry_proto_metrics_v1_Histogram histogram;
+        opentelemetry_proto_metrics_v1_ExponentialHistogram exponential_histogram;
+        opentelemetry_proto_metrics_v1_Summary summary;
+    } data;
+} opentelemetry_proto_metrics_v1_Metric;
+
+/* NumberDataPoint is a single data point in a timeseries that describes the
+ time-varying scalar value of a metric. */
+typedef struct _opentelemetry_proto_metrics_v1_NumberDataPoint {
+    /* StartTimeUnixNano is optional but strongly encouraged, see the
+ the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t start_time_unix_nano;
+    /* TimeUnixNano is required, see the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t time_unix_nano;
+    pb_size_t which_value;
+    union {
+        double as_double;
+        int64_t as_int;
+    } value;
+    /* (Optional) List of exemplars collected from
+ measurements that were used to form the data point */
+    pb_callback_t exemplars;
+    /* The set of key/value pairs that uniquely identify the timeseries from
+ where this point belongs. The list may be empty (may contain 0 elements).
+ Attribute keys MUST be unique (it is not allowed to have more than one
+ attribute with the same key). */
+    pb_callback_t attributes;
+    /* Flags that apply to this specific data point.  See DataPointFlags
+ for the available flags and their meaning. */
+    uint32_t flags;
+} opentelemetry_proto_metrics_v1_NumberDataPoint;
+
+/* HistogramDataPoint is a single data point in a timeseries that describes the
+ time-varying values of a Histogram. A Histogram contains summary statistics
+ for a population of values, it may optionally contain the distribution of
+ those values across a set of buckets.
+
+ If the histogram contains the distribution of values, then both
+ "explicit_bounds" and "bucket counts" fields must be defined.
+ If the histogram does not contain the distribution of values, then both
+ "explicit_bounds" and "bucket_counts" must be omitted and only "count" and
+ "sum" are known. */
+typedef struct _opentelemetry_proto_metrics_v1_HistogramDataPoint {
+    /* StartTimeUnixNano is optional but strongly encouraged, see the
+ the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t start_time_unix_nano;
+    /* TimeUnixNano is required, see the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t time_unix_nano;
+    /* count is the number of values in the population. Must be non-negative. This
+ value must be equal to the sum of the "count" fields in buckets if a
+ histogram is provided. */
+    uint64_t count;
+    /* sum of the values in the population. If count is zero then this field
+ must be zero.
+
+ Note: Sum should only be filled out when measuring non-negative discrete
+ events, and is assumed to be monotonic over the values of these events.
+ Negative events *can* be recorded, but sum should not be filled out when
+ doing so.  This is specifically to enforce compatibility w/ OpenMetrics,
+ see: https://github.com/OpenObservability/OpenMetrics/blob/main/specification/OpenMetrics.md#histogram */
+    bool has_sum;
+    double sum;
+    /* bucket_counts is an optional field contains the count values of histogram
+ for each bucket.
+
+ The sum of the bucket_counts must equal the value in the count field.
+
+ The number of elements in bucket_counts array must be by one greater than
+ the number of elements in explicit_bounds array. */
+    pb_callback_t bucket_counts;
+    /* explicit_bounds specifies buckets with explicitly defined bounds for values.
+
+ The boundaries for bucket at index i are:
+
+ (-infinity, explicit_bounds[i]] for i == 0
+ (explicit_bounds[i-1], explicit_bounds[i]] for 0 < i < size(explicit_bounds)
+ (explicit_bounds[i-1], +infinity) for i == size(explicit_bounds)
+
+ The values in the explicit_bounds array must be strictly increasing.
+
+ Histogram buckets are inclusive of their upper boundary, except the last
+ bucket where the boundary is at infinity. This format is intentionally
+ compatible with the OpenMetrics histogram definition. */
+    pb_callback_t explicit_bounds;
+    /* (Optional) List of exemplars collected from
+ measurements that were used to form the data point */
+    pb_callback_t exemplars;
+    /* The set of key/value pairs that uniquely identify the timeseries from
+ where this point belongs. The list may be empty (may contain 0 elements).
+ Attribute keys MUST be unique (it is not allowed to have more than one
+ attribute with the same key). */
+    pb_callback_t attributes;
+    /* Flags that apply to this specific data point.  See DataPointFlags
+ for the available flags and their meaning. */
+    uint32_t flags;
+    /* min is the minimum value over (start_time, end_time]. */
+    bool has_min;
+    double min;
+    /* max is the maximum value over (start_time, end_time]. */
+    bool has_max;
+    double max;
+} opentelemetry_proto_metrics_v1_HistogramDataPoint;
+
+/* Buckets are a set of bucket counts, encoded in a contiguous array
+ of counts. */
+typedef struct _opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets {
+    /* Offset is the bucket index of the first entry in the bucket_counts array.
+ 
+ Note: This uses a varint encoding as a simple form of compression. */
+    int32_t offset;
+    /* bucket_counts is an array of count values, where bucket_counts[i] carries
+ the count of the bucket at index (offset+i). bucket_counts[i] is the count
+ of values greater than base^(offset+i) and less than or equal to
+ base^(offset+i+1).
+
+ Note: By contrast, the explicit HistogramDataPoint uses
+ fixed64.  This field is expected to have many buckets,
+ especially zeros, so uint64 has been selected to ensure
+ varint encoding. */
+    pb_callback_t bucket_counts;
+} opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets;
+
+/* ExponentialHistogramDataPoint is a single data point in a timeseries that describes the
+ time-varying values of a ExponentialHistogram of double values. A ExponentialHistogram contains
+ summary statistics for a population of values, it may optionally contain the
+ distribution of those values across a set of buckets. */
+typedef struct _opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint {
+    /* The set of key/value pairs that uniquely identify the timeseries from
+ where this point belongs. The list may be empty (may contain 0 elements).
+ Attribute keys MUST be unique (it is not allowed to have more than one
+ attribute with the same key). */
+    pb_callback_t attributes;
+    /* StartTimeUnixNano is optional but strongly encouraged, see the
+ the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t start_time_unix_nano;
+    /* TimeUnixNano is required, see the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t time_unix_nano;
+    /* count is the number of values in the population. Must be
+ non-negative. This value must be equal to the sum of the "bucket_counts"
+ values in the positive and negative Buckets plus the "zero_count" field. */
+    uint64_t count;
+    /* sum of the values in the population. If count is zero then this field
+ must be zero.
+
+ Note: Sum should only be filled out when measuring non-negative discrete
+ events, and is assumed to be monotonic over the values of these events.
+ Negative events *can* be recorded, but sum should not be filled out when
+ doing so.  This is specifically to enforce compatibility w/ OpenMetrics,
+ see: https://github.com/OpenObservability/OpenMetrics/blob/main/specification/OpenMetrics.md#histogram */
+    bool has_sum;
+    double sum;
+    /* scale describes the resolution of the histogram.  Boundaries are
+ located at powers of the base, where:
+
+   base = (2^(2^-scale))
+
+ The histogram bucket identified by `index`, a signed integer,
+ contains values that are greater than (base^index) and
+ less than or equal to (base^(index+1)).
+
+ The positive and negative ranges of the histogram are expressed
+ separately.  Negative values are mapped by their absolute value
+ into the negative range using the same scale as the positive range.
+
+ scale is not restricted by the protocol, as the permissible
+ values depend on the range of the data. */
+    int32_t scale;
+    /* zero_count is the count of values that are either exactly zero or
+ within the region considered zero by the instrumentation at the
+ tolerated degree of precision.  This bucket stores values that
+ cannot be expressed using the standard exponential formula as
+ well as values that have been rounded to zero.
+
+ Implementations MAY consider the zero bucket to have probability
+ mass equal to (zero_count / count). */
+    uint64_t zero_count;
+    /* positive carries the positive range of exponential bucket counts. */
+    bool has_positive;
+    opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets positive;
+    /* negative carries the negative range of exponential bucket counts. */
+    bool has_negative;
+    opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets negative;
+    /* Flags that apply to this specific data point.  See DataPointFlags
+ for the available flags and their meaning. */
+    uint32_t flags;
+    /* (Optional) List of exemplars collected from
+ measurements that were used to form the data point */
+    pb_callback_t exemplars;
+    /* min is the minimum value over (start_time, end_time]. */
+    bool has_min;
+    double min;
+    /* max is the maximum value over (start_time, end_time]. */
+    bool has_max;
+    double max;
+    /* ZeroThreshold may be optionally set to convey the width of the zero
+ region. Where the zero region is defined as the closed interval
+ [-ZeroThreshold, ZeroThreshold].
+ When ZeroThreshold is 0, zero count bucket stores values that cannot be
+ expressed using the standard exponential formula as well as values that
+ have been rounded to zero. */
+    double zero_threshold;
+} opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint;
+
+/* SummaryDataPoint is a single data point in a timeseries that describes the
+ time-varying values of a Summary metric. */
+typedef struct _opentelemetry_proto_metrics_v1_SummaryDataPoint {
+    /* StartTimeUnixNano is optional but strongly encouraged, see the
+ the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t start_time_unix_nano;
+    /* TimeUnixNano is required, see the detailed comments above Metric.
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t time_unix_nano;
+    /* count is the number of values in the population. Must be non-negative. */
+    uint64_t count;
+    /* sum of the values in the population. If count is zero then this field
+ must be zero.
+
+ Note: Sum should only be filled out when measuring non-negative discrete
+ events, and is assumed to be monotonic over the values of these events.
+ Negative events *can* be recorded, but sum should not be filled out when
+ doing so.  This is specifically to enforce compatibility w/ OpenMetrics,
+ see: https://github.com/OpenObservability/OpenMetrics/blob/main/specification/OpenMetrics.md#summary */
+    double sum;
+    /* (Optional) list of values at different quantiles of the distribution calculated
+ from the current snapshot. The quantiles must be strictly increasing. */
+    pb_callback_t quantile_values;
+    /* The set of key/value pairs that uniquely identify the timeseries from
+ where this point belongs. The list may be empty (may contain 0 elements).
+ Attribute keys MUST be unique (it is not allowed to have more than one
+ attribute with the same key). */
+    pb_callback_t attributes;
+    /* Flags that apply to this specific data point.  See DataPointFlags
+ for the available flags and their meaning. */
+    uint32_t flags;
+} opentelemetry_proto_metrics_v1_SummaryDataPoint;
+
+/* Represents the value at a given quantile of a distribution.
+
+ To record Min and Max values following conventions are used:
+ - The 1.0 quantile is equivalent to the maximum value observed.
+ - The 0.0 quantile is equivalent to the minimum value observed.
+
+ See the following issue for more context:
+ https://github.com/open-telemetry/opentelemetry-proto/issues/125 */
+typedef struct _opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile {
+    /* The quantile of a distribution. Must be in the interval
+ [0.0, 1.0]. */
+    double quantile;
+    /* The value at the given quantile of a distribution.
+
+ Quantile values must NOT be negative. */
+    double value;
+} opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile;
+
+/* A representation of an exemplar, which is a sample input measurement.
+ Exemplars also hold information about the environment when the measurement
+ was recorded, for example the span and trace ID of the active span when the
+ exemplar was recorded. */
+typedef struct _opentelemetry_proto_metrics_v1_Exemplar {
+    /* time_unix_nano is the exact time when this exemplar was recorded
+
+ Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January
+ 1970. */
+    uint64_t time_unix_nano;
+    pb_size_t which_value;
+    union {
+        double as_double;
+        int64_t as_int;
+    } value;
+    /* (Optional) Span ID of the exemplar trace.
+ span_id may be missing if the measurement is not recorded inside a trace
+ or if the trace is not sampled. */
+    pb_callback_t span_id;
+    /* (Optional) Trace ID of the exemplar trace.
+ trace_id may be missing if the measurement is not recorded inside a trace
+ or if the trace is not sampled. */
+    pb_callback_t trace_id;
+    /* The set of key/value pairs that were filtered out by the aggregator, but
+ recorded alongside the original measurement. Only key/value pairs that were
+ filtered out by the aggregator should be included */
+    pb_callback_t filtered_attributes;
+} opentelemetry_proto_metrics_v1_Exemplar;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Helper constants for enums */
+#define _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN opentelemetry_proto_metrics_v1_AggregationTemporality_AGGREGATION_TEMPORALITY_UNSPECIFIED
+#define _opentelemetry_proto_metrics_v1_AggregationTemporality_MAX opentelemetry_proto_metrics_v1_AggregationTemporality_AGGREGATION_TEMPORALITY_CUMULATIVE
+#define _opentelemetry_proto_metrics_v1_AggregationTemporality_ARRAYSIZE ((opentelemetry_proto_metrics_v1_AggregationTemporality)(opentelemetry_proto_metrics_v1_AggregationTemporality_AGGREGATION_TEMPORALITY_CUMULATIVE+1))
+
+#define _opentelemetry_proto_metrics_v1_DataPointFlags_MIN opentelemetry_proto_metrics_v1_DataPointFlags_DATA_POINT_FLAGS_DO_NOT_USE
+#define _opentelemetry_proto_metrics_v1_DataPointFlags_MAX opentelemetry_proto_metrics_v1_DataPointFlags_DATA_POINT_FLAGS_NO_RECORDED_VALUE_MASK
+#define _opentelemetry_proto_metrics_v1_DataPointFlags_ARRAYSIZE ((opentelemetry_proto_metrics_v1_DataPointFlags)(opentelemetry_proto_metrics_v1_DataPointFlags_DATA_POINT_FLAGS_NO_RECORDED_VALUE_MASK+1))
+
+
+
+
+
+
+#define opentelemetry_proto_metrics_v1_Sum_aggregation_temporality_ENUMTYPE opentelemetry_proto_metrics_v1_AggregationTemporality
+
+#define opentelemetry_proto_metrics_v1_Histogram_aggregation_temporality_ENUMTYPE opentelemetry_proto_metrics_v1_AggregationTemporality
+
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_aggregation_temporality_ENUMTYPE opentelemetry_proto_metrics_v1_AggregationTemporality
+
+
+
+
+
+
+
+
+
+
+/* Initializer values for message structs */
+#define opentelemetry_proto_metrics_v1_MetricsData_init_default {{{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_init_default {false, opentelemetry_proto_resource_v1_Resource_init_default, {{NULL}, NULL}, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_init_default {false, opentelemetry_proto_common_v1_InstrumentationScope_init_default, {{NULL}, NULL}, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_Metric_init_default {{{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, 0, {opentelemetry_proto_metrics_v1_Gauge_init_default}}
+#define opentelemetry_proto_metrics_v1_Gauge_init_default {{{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_Sum_init_default {{{NULL}, NULL}, _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN, 0}
+#define opentelemetry_proto_metrics_v1_Histogram_init_default {{{NULL}, NULL}, _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN}
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_init_default {{{NULL}, NULL}, _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN}
+#define opentelemetry_proto_metrics_v1_Summary_init_default {{{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_init_default {0, 0, 0, {0}, {{NULL}, NULL}, {{NULL}, NULL}, 0}
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_init_default {0, 0, 0, false, 0, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, 0, false, 0, false, 0}
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_init_default {{{NULL}, NULL}, 0, 0, 0, false, 0, 0, 0, false, opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_init_default, false, opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_init_default, 0, {{NULL}, NULL}, false, 0, false, 0, 0}
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_init_default {0, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_init_default {0, 0, 0, 0, {{NULL}, NULL}, {{NULL}, NULL}, 0}
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_init_default {0, 0}
+#define opentelemetry_proto_metrics_v1_Exemplar_init_default {0, 0, {0}, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_MetricsData_init_zero {{{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_init_zero {false, opentelemetry_proto_resource_v1_Resource_init_zero, {{NULL}, NULL}, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_init_zero {false, opentelemetry_proto_common_v1_InstrumentationScope_init_zero, {{NULL}, NULL}, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_Metric_init_zero {{{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, 0, {opentelemetry_proto_metrics_v1_Gauge_init_zero}}
+#define opentelemetry_proto_metrics_v1_Gauge_init_zero {{{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_Sum_init_zero {{{NULL}, NULL}, _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN, 0}
+#define opentelemetry_proto_metrics_v1_Histogram_init_zero {{{NULL}, NULL}, _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN}
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_init_zero {{{NULL}, NULL}, _opentelemetry_proto_metrics_v1_AggregationTemporality_MIN}
+#define opentelemetry_proto_metrics_v1_Summary_init_zero {{{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_init_zero {0, 0, 0, {0}, {{NULL}, NULL}, {{NULL}, NULL}, 0}
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_init_zero {0, 0, 0, false, 0, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}, 0, false, 0, false, 0}
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_init_zero {{{NULL}, NULL}, 0, 0, 0, false, 0, 0, 0, false, opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_init_zero, false, opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_init_zero, 0, {{NULL}, NULL}, false, 0, false, 0, 0}
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_init_zero {0, {{NULL}, NULL}}
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_init_zero {0, 0, 0, 0, {{NULL}, NULL}, {{NULL}, NULL}, 0}
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_init_zero {0, 0}
+#define opentelemetry_proto_metrics_v1_Exemplar_init_zero {0, 0, {0}, {{NULL}, NULL}, {{NULL}, NULL}, {{NULL}, NULL}}
+
+/* Field tags (for use in manual encoding/decoding) */
+#define opentelemetry_proto_metrics_v1_MetricsData_resource_metrics_tag 1
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_resource_tag 1
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_scope_metrics_tag 2
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_schema_url_tag 3
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_scope_tag 1
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_metrics_tag 2
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_schema_url_tag 3
+#define opentelemetry_proto_metrics_v1_Gauge_data_points_tag 1
+#define opentelemetry_proto_metrics_v1_Sum_data_points_tag 1
+#define opentelemetry_proto_metrics_v1_Sum_aggregation_temporality_tag 2
+#define opentelemetry_proto_metrics_v1_Sum_is_monotonic_tag 3
+#define opentelemetry_proto_metrics_v1_Histogram_data_points_tag 1
+#define opentelemetry_proto_metrics_v1_Histogram_aggregation_temporality_tag 2
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_data_points_tag 1
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_aggregation_temporality_tag 2
+#define opentelemetry_proto_metrics_v1_Summary_data_points_tag 1
+#define opentelemetry_proto_metrics_v1_Metric_name_tag 1
+#define opentelemetry_proto_metrics_v1_Metric_description_tag 2
+#define opentelemetry_proto_metrics_v1_Metric_unit_tag 3
+#define opentelemetry_proto_metrics_v1_Metric_gauge_tag 5
+#define opentelemetry_proto_metrics_v1_Metric_sum_tag 7
+#define opentelemetry_proto_metrics_v1_Metric_histogram_tag 9
+#define opentelemetry_proto_metrics_v1_Metric_exponential_histogram_tag 10
+#define opentelemetry_proto_metrics_v1_Metric_summary_tag 11
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_start_time_unix_nano_tag 2
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_time_unix_nano_tag 3
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_as_double_tag 4
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_as_int_tag 6
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_exemplars_tag 5
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_attributes_tag 7
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_flags_tag 8
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_start_time_unix_nano_tag 2
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_time_unix_nano_tag 3
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_count_tag 4
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_sum_tag 5
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_bucket_counts_tag 6
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_explicit_bounds_tag 7
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_exemplars_tag 8
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_attributes_tag 9
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_flags_tag 10
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_min_tag 11
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_max_tag 12
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_offset_tag 1
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_bucket_counts_tag 2
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_attributes_tag 1
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_start_time_unix_nano_tag 2
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_time_unix_nano_tag 3
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_count_tag 4
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_sum_tag 5
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_scale_tag 6
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_zero_count_tag 7
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_positive_tag 8
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_negative_tag 9
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_flags_tag 10
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_exemplars_tag 11
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_min_tag 12
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_max_tag 13
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_zero_threshold_tag 14
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_start_time_unix_nano_tag 2
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_time_unix_nano_tag 3
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_count_tag 4
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_sum_tag 5
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_quantile_values_tag 6
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_attributes_tag 7
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_flags_tag 8
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_quantile_tag 1
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_value_tag 2
+#define opentelemetry_proto_metrics_v1_Exemplar_time_unix_nano_tag 2
+#define opentelemetry_proto_metrics_v1_Exemplar_as_double_tag 3
+#define opentelemetry_proto_metrics_v1_Exemplar_as_int_tag 6
+#define opentelemetry_proto_metrics_v1_Exemplar_span_id_tag 4
+#define opentelemetry_proto_metrics_v1_Exemplar_trace_id_tag 5
+#define opentelemetry_proto_metrics_v1_Exemplar_filtered_attributes_tag 7
+
+/* Struct field encoding specification for nanopb */
+#define opentelemetry_proto_metrics_v1_MetricsData_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  resource_metrics,   1)
+#define opentelemetry_proto_metrics_v1_MetricsData_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_MetricsData_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_MetricsData_resource_metrics_MSGTYPE opentelemetry_proto_metrics_v1_ResourceMetrics
+
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_FIELDLIST(X, a) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  resource,          1) \
+X(a, CALLBACK, REPEATED, MESSAGE,  scope_metrics,     2) \
+X(a, CALLBACK, SINGULAR, STRING,   schema_url,        3)
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_resource_MSGTYPE opentelemetry_proto_resource_v1_Resource
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_scope_metrics_MSGTYPE opentelemetry_proto_metrics_v1_ScopeMetrics
+
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_FIELDLIST(X, a) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  scope,             1) \
+X(a, CALLBACK, REPEATED, MESSAGE,  metrics,           2) \
+X(a, CALLBACK, SINGULAR, STRING,   schema_url,        3)
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_scope_MSGTYPE opentelemetry_proto_common_v1_InstrumentationScope
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_metrics_MSGTYPE opentelemetry_proto_metrics_v1_Metric
+
+#define opentelemetry_proto_metrics_v1_Metric_FIELDLIST(X, a) \
+X(a, CALLBACK, SINGULAR, STRING,   name,              1) \
+X(a, CALLBACK, SINGULAR, STRING,   description,       2) \
+X(a, CALLBACK, SINGULAR, STRING,   unit,              3) \
+X(a, STATIC,   ONEOF,    MSG_W_CB, (data,gauge,data.gauge),   5) \
+X(a, STATIC,   ONEOF,    MSG_W_CB, (data,sum,data.sum),   7) \
+X(a, STATIC,   ONEOF,    MSG_W_CB, (data,histogram,data.histogram),   9) \
+X(a, STATIC,   ONEOF,    MSG_W_CB, (data,exponential_histogram,data.exponential_histogram),  10) \
+X(a, STATIC,   ONEOF,    MSG_W_CB, (data,summary,data.summary),  11)
+#define opentelemetry_proto_metrics_v1_Metric_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_Metric_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_Metric_data_gauge_MSGTYPE opentelemetry_proto_metrics_v1_Gauge
+#define opentelemetry_proto_metrics_v1_Metric_data_sum_MSGTYPE opentelemetry_proto_metrics_v1_Sum
+#define opentelemetry_proto_metrics_v1_Metric_data_histogram_MSGTYPE opentelemetry_proto_metrics_v1_Histogram
+#define opentelemetry_proto_metrics_v1_Metric_data_exponential_histogram_MSGTYPE opentelemetry_proto_metrics_v1_ExponentialHistogram
+#define opentelemetry_proto_metrics_v1_Metric_data_summary_MSGTYPE opentelemetry_proto_metrics_v1_Summary
+
+#define opentelemetry_proto_metrics_v1_Gauge_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  data_points,       1)
+#define opentelemetry_proto_metrics_v1_Gauge_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_Gauge_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_Gauge_data_points_MSGTYPE opentelemetry_proto_metrics_v1_NumberDataPoint
+
+#define opentelemetry_proto_metrics_v1_Sum_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  data_points,       1) \
+X(a, STATIC,   SINGULAR, UENUM,    aggregation_temporality,   2) \
+X(a, STATIC,   SINGULAR, BOOL,     is_monotonic,      3)
+#define opentelemetry_proto_metrics_v1_Sum_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_Sum_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_Sum_data_points_MSGTYPE opentelemetry_proto_metrics_v1_NumberDataPoint
+
+#define opentelemetry_proto_metrics_v1_Histogram_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  data_points,       1) \
+X(a, STATIC,   SINGULAR, UENUM,    aggregation_temporality,   2)
+#define opentelemetry_proto_metrics_v1_Histogram_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_Histogram_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_Histogram_data_points_MSGTYPE opentelemetry_proto_metrics_v1_HistogramDataPoint
+
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  data_points,       1) \
+X(a, STATIC,   SINGULAR, UENUM,    aggregation_temporality,   2)
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_data_points_MSGTYPE opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint
+
+#define opentelemetry_proto_metrics_v1_Summary_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  data_points,       1)
+#define opentelemetry_proto_metrics_v1_Summary_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_Summary_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_Summary_data_points_MSGTYPE opentelemetry_proto_metrics_v1_SummaryDataPoint
+
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, FIXED64,  start_time_unix_nano,   2) \
+X(a, STATIC,   SINGULAR, FIXED64,  time_unix_nano,    3) \
+X(a, STATIC,   ONEOF,    DOUBLE,   (value,as_double,value.as_double),   4) \
+X(a, CALLBACK, REPEATED, MESSAGE,  exemplars,         5) \
+X(a, STATIC,   ONEOF,    SFIXED64, (value,as_int,value.as_int),   6) \
+X(a, CALLBACK, REPEATED, MESSAGE,  attributes,        7) \
+X(a, STATIC,   SINGULAR, UINT32,   flags,             8)
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_exemplars_MSGTYPE opentelemetry_proto_metrics_v1_Exemplar
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_attributes_MSGTYPE opentelemetry_proto_common_v1_KeyValue
+
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, FIXED64,  start_time_unix_nano,   2) \
+X(a, STATIC,   SINGULAR, FIXED64,  time_unix_nano,    3) \
+X(a, STATIC,   SINGULAR, FIXED64,  count,             4) \
+X(a, STATIC,   OPTIONAL, DOUBLE,   sum,               5) \
+X(a, CALLBACK, REPEATED, FIXED64,  bucket_counts,     6) \
+X(a, CALLBACK, REPEATED, DOUBLE,   explicit_bounds,   7) \
+X(a, CALLBACK, REPEATED, MESSAGE,  exemplars,         8) \
+X(a, CALLBACK, REPEATED, MESSAGE,  attributes,        9) \
+X(a, STATIC,   SINGULAR, UINT32,   flags,            10) \
+X(a, STATIC,   OPTIONAL, DOUBLE,   min,              11) \
+X(a, STATIC,   OPTIONAL, DOUBLE,   max,              12)
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_exemplars_MSGTYPE opentelemetry_proto_metrics_v1_Exemplar
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_attributes_MSGTYPE opentelemetry_proto_common_v1_KeyValue
+
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_FIELDLIST(X, a) \
+X(a, CALLBACK, REPEATED, MESSAGE,  attributes,        1) \
+X(a, STATIC,   SINGULAR, FIXED64,  start_time_unix_nano,   2) \
+X(a, STATIC,   SINGULAR, FIXED64,  time_unix_nano,    3) \
+X(a, STATIC,   SINGULAR, FIXED64,  count,             4) \
+X(a, STATIC,   OPTIONAL, DOUBLE,   sum,               5) \
+X(a, STATIC,   SINGULAR, SINT32,   scale,             6) \
+X(a, STATIC,   SINGULAR, FIXED64,  zero_count,        7) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  positive,          8) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  negative,          9) \
+X(a, STATIC,   SINGULAR, UINT32,   flags,            10) \
+X(a, CALLBACK, REPEATED, MESSAGE,  exemplars,        11) \
+X(a, STATIC,   OPTIONAL, DOUBLE,   min,              12) \
+X(a, STATIC,   OPTIONAL, DOUBLE,   max,              13) \
+X(a, STATIC,   SINGULAR, DOUBLE,   zero_threshold,   14)
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_attributes_MSGTYPE opentelemetry_proto_common_v1_KeyValue
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_positive_MSGTYPE opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_negative_MSGTYPE opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_exemplars_MSGTYPE opentelemetry_proto_metrics_v1_Exemplar
+
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, SINT32,   offset,            1) \
+X(a, CALLBACK, REPEATED, UINT64,   bucket_counts,     2)
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_DEFAULT NULL
+
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, FIXED64,  start_time_unix_nano,   2) \
+X(a, STATIC,   SINGULAR, FIXED64,  time_unix_nano,    3) \
+X(a, STATIC,   SINGULAR, FIXED64,  count,             4) \
+X(a, STATIC,   SINGULAR, DOUBLE,   sum,               5) \
+X(a, CALLBACK, REPEATED, MESSAGE,  quantile_values,   6) \
+X(a, CALLBACK, REPEATED, MESSAGE,  attributes,        7) \
+X(a, STATIC,   SINGULAR, UINT32,   flags,             8)
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_quantile_values_MSGTYPE opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_attributes_MSGTYPE opentelemetry_proto_common_v1_KeyValue
+
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, DOUBLE,   quantile,          1) \
+X(a, STATIC,   SINGULAR, DOUBLE,   value,             2)
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_CALLBACK NULL
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_DEFAULT NULL
+
+#define opentelemetry_proto_metrics_v1_Exemplar_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, FIXED64,  time_unix_nano,    2) \
+X(a, STATIC,   ONEOF,    DOUBLE,   (value,as_double,value.as_double),   3) \
+X(a, CALLBACK, SINGULAR, BYTES,    span_id,           4) \
+X(a, CALLBACK, SINGULAR, BYTES,    trace_id,          5) \
+X(a, STATIC,   ONEOF,    SFIXED64, (value,as_int,value.as_int),   6) \
+X(a, CALLBACK, REPEATED, MESSAGE,  filtered_attributes,   7)
+#define opentelemetry_proto_metrics_v1_Exemplar_CALLBACK pb_default_field_callback
+#define opentelemetry_proto_metrics_v1_Exemplar_DEFAULT NULL
+#define opentelemetry_proto_metrics_v1_Exemplar_filtered_attributes_MSGTYPE opentelemetry_proto_common_v1_KeyValue
+
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_MetricsData_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_ResourceMetrics_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_ScopeMetrics_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_Metric_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_Gauge_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_Sum_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_Histogram_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_ExponentialHistogram_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_Summary_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_NumberDataPoint_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_HistogramDataPoint_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_SummaryDataPoint_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_msg;
+extern const pb_msgdesc_t opentelemetry_proto_metrics_v1_Exemplar_msg;
+
+/* Defines for backwards compatibility with code written before nanopb-0.4.0 */
+#define opentelemetry_proto_metrics_v1_MetricsData_fields &opentelemetry_proto_metrics_v1_MetricsData_msg
+#define opentelemetry_proto_metrics_v1_ResourceMetrics_fields &opentelemetry_proto_metrics_v1_ResourceMetrics_msg
+#define opentelemetry_proto_metrics_v1_ScopeMetrics_fields &opentelemetry_proto_metrics_v1_ScopeMetrics_msg
+#define opentelemetry_proto_metrics_v1_Metric_fields &opentelemetry_proto_metrics_v1_Metric_msg
+#define opentelemetry_proto_metrics_v1_Gauge_fields &opentelemetry_proto_metrics_v1_Gauge_msg
+#define opentelemetry_proto_metrics_v1_Sum_fields &opentelemetry_proto_metrics_v1_Sum_msg
+#define opentelemetry_proto_metrics_v1_Histogram_fields &opentelemetry_proto_metrics_v1_Histogram_msg
+#define opentelemetry_proto_metrics_v1_ExponentialHistogram_fields &opentelemetry_proto_metrics_v1_ExponentialHistogram_msg
+#define opentelemetry_proto_metrics_v1_Summary_fields &opentelemetry_proto_metrics_v1_Summary_msg
+#define opentelemetry_proto_metrics_v1_NumberDataPoint_fields &opentelemetry_proto_metrics_v1_NumberDataPoint_msg
+#define opentelemetry_proto_metrics_v1_HistogramDataPoint_fields &opentelemetry_proto_metrics_v1_HistogramDataPoint_msg
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_fields &opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_msg
+#define opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_fields &opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_msg
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_fields &opentelemetry_proto_metrics_v1_SummaryDataPoint_msg
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_fields &opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_msg
+#define opentelemetry_proto_metrics_v1_Exemplar_fields &opentelemetry_proto_metrics_v1_Exemplar_msg
+
+/* Maximum encoded size of messages (where known) */
+/* opentelemetry_proto_metrics_v1_MetricsData_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_ResourceMetrics_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_ScopeMetrics_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_Metric_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_Gauge_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_Sum_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_Histogram_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_ExponentialHistogram_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_Summary_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_NumberDataPoint_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_HistogramDataPoint_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_ExponentialHistogramDataPoint_Buckets_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_SummaryDataPoint_size depends on runtime parameters */
+/* opentelemetry_proto_metrics_v1_Exemplar_size depends on runtime parameters */
+#define opentelemetry_proto_metrics_v1_SummaryDataPoint_ValueAtQuantile_size 18
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif