@point3/node-rdkafka 3.6.0-1

package/deps/librdkafka/src/crc32c.c

@@ -0,0 +1,430 @@
+/* Copied from http://stackoverflow.com/a/17646775/1821055
+ * with the following modifications:
+ *   * remove test code
+ *   * global hw/sw initialization to be called once per process
+ *   * HW support is determined by configure's WITH_CRC32C_HW
+ *   * Windows porting (no hardware support on Windows yet)
+ *
+ * FIXME:
+ *   * Hardware support on Windows (MSVC assembler)
+ *   * Hardware support on ARM
+ */
+
+/* crc32c.c -- compute CRC-32C using the Intel crc32 instruction
+ * Copyright (C) 2013 Mark Adler
+ * Version 1.1  1 Aug 2013  Mark Adler
+ */
+
+/*
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the author be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Mark Adler
+  madler@alumni.caltech.edu
+ */
+
+/* Use hardware CRC instruction on Intel SSE 4.2 processors.  This computes a
+   CRC-32C, *not* the CRC-32 used by Ethernet and zip, gzip, etc.  A software
+   version is provided as a fall-back, as well as for speed comparisons. */
+
+/* Version history:
+   1.0  10 Feb 2013  First version
+   1.1   1 Aug 2013  Correct comments on why three crc instructions in parallel
+ */
+
+#include "rd.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#ifndef _WIN32
+#include <unistd.h>
+#endif
+
+#include "rdunittest.h"
+#include "rdendian.h"
+
+#include "crc32c.h"
+
+/* CRC-32C (iSCSI) polynomial in reversed bit order. */
+#define POLY 0x82f63b78
+
+/* Table for a quadword-at-a-time software crc. */
+static uint32_t crc32c_table[8][256];
+
+/* Construct table for software CRC-32C calculation. */
+static void crc32c_init_sw(void)
+{
+    uint32_t n, crc, k;
+
+    for (n = 0; n < 256; n++) {
+        crc = n;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
+        crc32c_table[0][n] = crc;
+    }
+    for (n = 0; n < 256; n++) {
+        crc = crc32c_table[0][n];
+        for (k = 1; k < 8; k++) {
+            crc = crc32c_table[0][crc & 0xff] ^ (crc >> 8);
+            crc32c_table[k][n] = crc;
+        }
+    }
+}
+
+/* Table-driven software version as a fall-back.  This is about 15 times slower
+   than using the hardware instructions.  This assumes little-endian integers,
+   as is the case on Intel processors that the assembler code here is for. */
+static uint32_t crc32c_sw(uint32_t crci, const void *buf, size_t len)
+{
+    const unsigned char *next = buf;
+    uint64_t crc;
+
+    crc = crci ^ 0xffffffff;
+    while (len && ((uintptr_t)next & 7) != 0) {
+        crc = crc32c_table[0][(crc ^ *next++) & 0xff] ^ (crc >> 8);
+        len--;
+    }
+    while (len >= 8) {
+        /* Alignment-safe */
+        uint64_t ncopy;
+        memcpy(&ncopy, next, sizeof(ncopy));
+        crc ^= le64toh(ncopy);
+        crc = crc32c_table[7][crc & 0xff] ^
+              crc32c_table[6][(crc >> 8) & 0xff] ^
+              crc32c_table[5][(crc >> 16) & 0xff] ^
+              crc32c_table[4][(crc >> 24) & 0xff] ^
+              crc32c_table[3][(crc >> 32) & 0xff] ^
+              crc32c_table[2][(crc >> 40) & 0xff] ^
+              crc32c_table[1][(crc >> 48) & 0xff] ^
+              crc32c_table[0][crc >> 56];
+        next += 8;
+        len -= 8;
+    }
+    while (len) {
+        crc = crc32c_table[0][(crc ^ *next++) & 0xff] ^ (crc >> 8);
+        len--;
+    }
+    return (uint32_t)crc ^ 0xffffffff;
+}
+
+
+#if WITH_CRC32C_HW
+static int sse42;  /* Cached SSE42 support */
+
+/* Multiply a matrix times a vector over the Galois field of two elements,
+   GF(2).  Each element is a bit in an unsigned integer.  mat must have at
+   least as many entries as the power of two for most significant one bit in
+   vec. */
+static RD_INLINE uint32_t gf2_matrix_times(uint32_t *mat, uint32_t vec)
+{
+    uint32_t sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* Multiply a matrix by itself over GF(2).  Both mat and square must have 32
+   rows. */
+static RD_INLINE void gf2_matrix_square(uint32_t *square, uint32_t *mat)
+{
+    int n;
+
+    for (n = 0; n < 32; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* Construct an operator to apply len zeros to a crc.  len must be a power of
+   two.  If len is not a power of two, then the result is the same as for the
+   largest power of two less than len.  The result for len == 0 is the same as
+   for len == 1.  A version of this routine could be easily written for any
+   len, but that is not needed for this application. */
+static void crc32c_zeros_op(uint32_t *even, size_t len)
+{
+    int n;
+    uint32_t row;
+    uint32_t odd[32];       /* odd-power-of-two zeros operator */
+
+    /* put operator for one zero bit in odd */
+    odd[0] = POLY;              /* CRC-32C polynomial */
+    row = 1;
+    for (n = 1; n < 32; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* first square will put the operator for one zero byte (eight zero bits),
+       in even -- next square puts operator for two zero bytes in odd, and so
+       on, until len has been rotated down to zero */
+    do {
+        gf2_matrix_square(even, odd);
+        len >>= 1;
+        if (len == 0)
+            return;
+        gf2_matrix_square(odd, even);
+        len >>= 1;
+    } while (len);
+
+    /* answer ended up in odd -- copy to even */
+    for (n = 0; n < 32; n++)
+        even[n] = odd[n];
+}
+
+/* Take a length and build four lookup tables for applying the zeros operator
+   for that length, byte-by-byte on the operand. */
+static void crc32c_zeros(uint32_t zeros[][256], size_t len)
+{
+    uint32_t n;
+    uint32_t op[32];
+
+    crc32c_zeros_op(op, len);
+    for (n = 0; n < 256; n++) {
+        zeros[0][n] = gf2_matrix_times(op, n);
+        zeros[1][n] = gf2_matrix_times(op, n << 8);
+        zeros[2][n] = gf2_matrix_times(op, n << 16);
+        zeros[3][n] = gf2_matrix_times(op, n << 24);
+    }
+}
+
+/* Apply the zeros operator table to crc. */
+static RD_INLINE uint32_t crc32c_shift(uint32_t zeros[][256], uint32_t crc)
+{
+    return zeros[0][crc & 0xff] ^ zeros[1][(crc >> 8) & 0xff] ^
+           zeros[2][(crc >> 16) & 0xff] ^ zeros[3][crc >> 24];
+}
+
+/* Block sizes for three-way parallel crc computation.  LONG and SHORT must
+   both be powers of two.  The associated string constants must be set
+   accordingly, for use in constructing the assembler instructions. */
+#define LONG 8192
+#define LONGx1 "8192"
+#define LONGx2 "16384"
+#define SHORT 256
+#define SHORTx1 "256"
+#define SHORTx2 "512"
+
+/* Tables for hardware crc that shift a crc by LONG and SHORT zeros. */
+static uint32_t crc32c_long[4][256];
+static uint32_t crc32c_short[4][256];
+
+/* Initialize tables for shifting crcs. */
+static void crc32c_init_hw(void)
+{
+    crc32c_zeros(crc32c_long, LONG);
+    crc32c_zeros(crc32c_short, SHORT);
+}
+
+/* Compute CRC-32C using the Intel hardware instruction. */
+static uint32_t crc32c_hw(uint32_t crc, const void *buf, size_t len)
+{
+    const unsigned char *next = buf;
+    const unsigned char *end;
+    uint64_t crc0, crc1, crc2;      /* need to be 64 bits for crc32q */
+
+    /* pre-process the crc */
+    crc0 = crc ^ 0xffffffff;
+
+    /* compute the crc for up to seven leading bytes to bring the data pointer
+       to an eight-byte boundary */
+    while (len && ((uintptr_t)next & 7) != 0) {
+        __asm__("crc32b\t" "(%1), %0"
+                : "=r"(crc0)
+                : "r"(next), "0"(crc0));
+        next++;
+        len--;
+    }
+
+    /* compute the crc on sets of LONG*3 bytes, executing three independent crc
+       instructions, each on LONG bytes -- this is optimized for the Nehalem,
+       Westmere, Sandy Bridge, and Ivy Bridge architectures, which have a
+       throughput of one crc per cycle, but a latency of three cycles */
+    while (len >= LONG*3) {
+        crc1 = 0;
+        crc2 = 0;
+        end = next + LONG;
+        do {
+            __asm__("crc32q\t" "(%3), %0\n\t"
+                    "crc32q\t" LONGx1 "(%3), %1\n\t"
+                    "crc32q\t" LONGx2 "(%3), %2"
+                    : "=r"(crc0), "=r"(crc1), "=r"(crc2)
+                    : "r"(next), "0"(crc0), "1"(crc1), "2"(crc2));
+            next += 8;
+        } while (next < end);
+        crc0 = crc32c_shift(crc32c_long, crc0) ^ crc1;
+        crc0 = crc32c_shift(crc32c_long, crc0) ^ crc2;
+        next += LONG*2;
+        len -= LONG*3;
+    }
+
+    /* do the same thing, but now on SHORT*3 blocks for the remaining data less
+       than a LONG*3 block */
+    while (len >= SHORT*3) {
+        crc1 = 0;
+        crc2 = 0;
+        end = next + SHORT;
+        do {
+            __asm__("crc32q\t" "(%3), %0\n\t"
+                    "crc32q\t" SHORTx1 "(%3), %1\n\t"
+                    "crc32q\t" SHORTx2 "(%3), %2"
+                    : "=r"(crc0), "=r"(crc1), "=r"(crc2)
+                    : "r"(next), "0"(crc0), "1"(crc1), "2"(crc2));
+            next += 8;
+        } while (next < end);
+        crc0 = crc32c_shift(crc32c_short, crc0) ^ crc1;
+        crc0 = crc32c_shift(crc32c_short, crc0) ^ crc2;
+        next += SHORT*2;
+        len -= SHORT*3;
+    }
+
+    /* compute the crc on the remaining eight-byte units less than a SHORT*3
+       block */
+    end = next + (len - (len & 7));
+    while (next < end) {
+        __asm__("crc32q\t" "(%1), %0"
+                : "=r"(crc0)
+                : "r"(next), "0"(crc0));
+        next += 8;
+    }
+    len &= 7;
+
+    /* compute the crc for up to seven trailing bytes */
+    while (len) {
+        __asm__("crc32b\t" "(%1), %0"
+                : "=r"(crc0)
+                : "r"(next), "0"(crc0));
+        next++;
+        len--;
+    }
+
+    /* return a post-processed crc */
+    return (uint32_t)crc0 ^ 0xffffffff;
+}
+
+/* Check for SSE 4.2.  SSE 4.2 was first supported in Nehalem processors
+   introduced in November, 2008.  This does not check for the existence of the
+   cpuid instruction itself, which was introduced on the 486SL in 1992, so this
+   will fail on earlier x86 processors.  cpuid works on all Pentium and later
+   processors. */
+#define SSE42(have) \
+    do { \
+        uint32_t eax, ecx; \
+        eax = 1; \
+        __asm__("cpuid" \
+                : "=c"(ecx) \
+                : "a"(eax) \
+                : "%ebx", "%edx"); \
+        (have) = (ecx >> 20) & 1; \
+    } while (0)
+
+#endif /* WITH_CRC32C_HW */
+
+/* Compute a CRC-32C.  If the crc32 instruction is available, use the hardware
+   version.  Otherwise, use the software version. */
+uint32_t rd_crc32c(uint32_t crc, const void *buf, size_t len)
+{
+#if WITH_CRC32C_HW
+        if (sse42)
+                return crc32c_hw(crc, buf, len);
+        else
+#endif
+                return crc32c_sw(crc, buf, len);
+}
+
+
+
+
+
+
+/**
+ * @brief Populate shift tables once
+ */
+void rd_crc32c_global_init (void) {
+#if WITH_CRC32C_HW
+        SSE42(sse42);
+        if (sse42)
+                crc32c_init_hw();
+        else
+#endif
+                crc32c_init_sw();
+}
+
+int unittest_rd_crc32c (void) {
+        const char *buf =
+"  This software is provided 'as-is', without any express or implied\n"
+"  warranty.  In no event will the author be held liable for any damages\n"
+"  arising from the use of this software.\n"
+"\n"
+"  Permission is granted to anyone to use this software for any purpose,\n"
+"  including commercial applications, and to alter it and redistribute it\n"
+"  freely, subject to the following restrictions:\n"
+"\n"
+"  1. The origin of this software must not be misrepresented; you must not\n"
+"     claim that you wrote the original software. If you use this software\n"
+"     in a product, an acknowledgment in the product documentation would be\n"
+"     appreciated but is not required.\n"
+"  2. Altered source versions must be plainly marked as such, and must not be\n"
+"     misrepresented as being the original software.\n"
+"  3. This notice may not be removed or altered from any source distribution.";
+        const uint32_t expected_crc = 0x7dcde113;
+        uint32_t crc;
+        const char *how;
+
+#if WITH_CRC32C_HW
+        if (sse42)
+                how = "hardware (SSE42)";
+        else
+                how = "software (SSE42 supported in build but not at runtime)";
+#else
+        how = "software";
+#endif
+        RD_UT_SAY("Calculate CRC32C using %s", how);
+
+        crc = rd_crc32c(0, buf, strlen(buf));
+        RD_UT_ASSERT(crc == expected_crc,
+                     "Calculated CRC (%s) 0x%"PRIx32
+                     " not matching expected CRC 0x%"PRIx32,
+                     how, crc, expected_crc);
+
+        /* Verify software version too, regardless of which
+         * version was used above. */
+        crc32c_init_sw();
+        RD_UT_SAY("Calculate CRC32C using software");
+        crc = crc32c_sw(0, buf, strlen(buf));
+        RD_UT_ASSERT(crc == expected_crc,
+                     "Calculated CRC (software) 0x%"PRIx32
+                     " not matching expected CRC 0x%"PRIx32,
+                     crc, expected_crc);
+
+        RD_UT_PASS();
+}

package/deps/librdkafka/src/crc32c.h

@@ -0,0 +1,38 @@
+/*
+ * librdkafka - Apache Kafka C library
+ *
+ * Copyright (c) 2017-2022, Magnus Edenhill
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RD_CRC32C_H_
+#define _RD_CRC32C_H_
+
+uint32_t rd_crc32c(uint32_t crc, const void *buf, size_t len);
+
+void rd_crc32c_global_init (void);
+
+int unittest_rd_crc32c (void);
+
+#endif /* _RD_CRC32C_H_ */

package/deps/librdkafka/src/generate_proto.sh

@@ -0,0 +1,66 @@
+#!/bin/bash
+#
+# librdkafka - Apache Kafka C library
+#
+# Copyright (c) 2020-2022, Magnus Edenhill
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+
+# Generate ApiKey / protocol request defines and rd_kafka_ApiKey2str() fields.
+# Cut'n'paste as needed to rdkafka_protocol.h and rdkafka_proto.h
+#
+#
+# Usage:
+#   src/generate_proto.sh /path/to/apache-kafka-source
+
+set -e
+
+KAFKA_DIR="$1"
+
+if [[ ! -d $KAFKA_DIR ]]; then
+    echo "Usage: $0 <path-to-kafka-source-directory>"
+    exit 1
+fi
+
+cd "$KAFKA_DIR"
+
+echo "################## Protocol defines (add to rdkafka_protocol.h) ###################"
+grep apiKey clients/src/main/resources/common/message/*Request.json | \
+    awk '{print $3, $1 }' | \
+    sort -n | \
+    sed -E -s 's/ cli.*\///' | \
+    sed -E 's/\.json:$//' | \
+    awk -F, '{print "#define RD_KAFKAP_" $2 " " $1}'
+echo "!! Don't forget to update RD_KAFKAP__NUM !!"
+echo
+echo
+
+echo "################## Protocol names (add to rdkafka_proto.h) ###################"
+grep apiKey clients/src/main/resources/common/message/*Request.json | \
+    awk '{print $3, $1 }' | \
+    sort -n | \
+    sed -E -s 's/ cli.*\///' | \
+    sed -E 's/\.json:$//' | \
+    awk -F, '{print "[RD_KAFKAP_" $2 "] = \"" $2 "\","}'
+