@openmouse/protocol 0.1.0

package/dist/drivers/steelseries/prime-plus-hid.js

@@ -0,0 +1,150 @@
+import { PRIME_PLUS_POLLING_RATES, PRIME_PLUS_REPORT_ID, STEELSERIES_PRODUCTS, STEELSERIES_VENDOR_ID, steelseriesPrimePlusDpiOptions, steelseriesPrimePlusEncodeButtonsMapping, steelseriesPrimePlusEncodeColor, steelseriesPrimePlusEncodeDpiPresets, steelseriesPrimePlusEncodeLedBrightness, steelseriesPrimePlusEncodePollingRate, steelseriesPrimePlusSaveCommand, } from "@openmouse/protocol/steelseries";
+/** rivalcfg's `command_approve_delay`, shared across every SteelSeries family. */
+const COMMAND_DELAY_MS = 50;
+/** rivalcfg profile defaults (`prime_plus.py`), shown only until this session writes a value. */
+const DEFAULT_DPI = 400;
+const DEFAULT_POLLING_HZ = 1000;
+/**
+ * SteelSeries Prime+ WebHID control (`1038:182C`).
+ *
+ * Like Aerox 3, the Prime+ has **no readable value at all** — no firmware
+ * query exists in `prime_plus.py`, so there is nothing to probe the device
+ * with. `readStatus` therefore treats a successful `open()` as the only
+ * available connectivity signal and reports the session's last-written
+ * values (or rivalcfg's documented defaults before any write) with
+ * `valuesVerified: false`, same honesty policy as Aerox 3 and Rival 3 Gen 1.
+ * Every setter follows its write with the save command so the change
+ * persists in the mouse's onboard memory, mirroring rivalcfg's CLI default.
+ *
+ * The config channel is hidapi interface 0, per `prime_plus.py`'s
+ * `"endpoint": 0` model entry; its WebHID collection shape has not been
+ * captured yet, so the picker offers every interface.
+ *
+ * See `../../steelseries/prime-plus.ts`'s doc comment for the full
+ * corroboration-gap disclosure (rivalcfg only — libratbag has no Prime/
+ * Prime+ support and OpenRGB's SteelSeries controller sources could not be
+ * located from this environment) and for why this device's protocol is not
+ * distinguishable from plain Prime's despite being its own module here.
+ */
+export class SteelSeriesPrimePlusHidClient {
+    device;
+    queue = Promise.resolve();
+    lastWritten = {
+        dpi: null,
+        pollingRateHz: null,
+    };
+    constructor(device) {
+        this.device = device;
+    }
+    static isSupported(device) {
+        if (device.vendorId !== STEELSERIES_VENDOR_ID)
+            return false;
+        const product = STEELSERIES_PRODUCTS.get(device.productId);
+        return product?.family === "prime-plus";
+    }
+    get pollIntervalMs() { return 30_000; }
+    get supportedPollingRates() { return [...PRIME_PLUS_POLLING_RATES]; }
+    getDpiOptions() { return steelseriesPrimePlusDpiOptions(); }
+    async open() {
+        if (!this.device.opened)
+            await this.device.open();
+    }
+    async close() {
+        if (this.device.opened)
+            await this.device.close();
+    }
+    async readStatus() {
+        return await this.run(async () => {
+            await this.open();
+            const name = this.device.productName?.trim() || "SteelSeries Prime+";
+            return {
+                brand: "SteelSeries",
+                name,
+                ui: {
+                    family: "steelseries-prime-plus",
+                    settingsReady: true,
+                    valuesVerified: false,
+                    hideUnsupportedPollingRates: true,
+                    hideProcessingCard: true,
+                    pollingNote: "The Prime+ cannot report its current settings; values shown are the last written by this app, or assumed defaults.",
+                    defaultDisplayName: "SteelSeries Prime+",
+                },
+                batteryPercent: null,
+                batteryState: "Unknown",
+                dpi: this.lastWritten.dpi ?? DEFAULT_DPI,
+                pollingRateHz: this.lastWritten.pollingRateHz ?? DEFAULT_POLLING_HZ,
+                supportedPollingRates: this.supportedPollingRates,
+                activeProfile: null,
+                connectionType: "Wired",
+                liftOffDistance: null,
+                firmware: [],
+            };
+        });
+    }
+    /**
+     * Replaces the mouse's DPI preset table with a single preset. The device
+     * is write-only, so the existing presets cannot be read and preserved —
+     * record them before testing.
+     */
+    async setDpi(dpi) {
+        const report = steelseriesPrimePlusEncodeDpiPresets([dpi], 0);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesPrimePlusSaveCommand());
+            this.lastWritten.dpi = dpi;
+        });
+        return dpi;
+    }
+    async setPollingRate(pollingRateHz) {
+        const report = steelseriesPrimePlusEncodePollingRate(pollingRateHz);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesPrimePlusSaveCommand());
+            this.lastWritten.pollingRateHz = pollingRateHz;
+        });
+        return pollingRateHz;
+    }
+    async setColor(r, g, b) {
+        const report = steelseriesPrimePlusEncodeColor(r, g, b);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesPrimePlusSaveCommand());
+        });
+    }
+    async setLedBrightness(level) {
+        const report = steelseriesPrimePlusEncodeLedBrightness(level);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesPrimePlusSaveCommand());
+        });
+    }
+    async setButtonsMapping(mapping) {
+        const report = steelseriesPrimePlusEncodeButtonsMapping(mapping);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesPrimePlusSaveCommand());
+        });
+    }
+    async write(payload) {
+        await this.device.sendReport(PRIME_PLUS_REPORT_ID, payload.buffer);
+    }
+    delay(milliseconds) {
+        return new Promise((resolve) => setTimeout(resolve, milliseconds));
+    }
+    async run(operation) {
+        const result = this.queue.then(operation, operation);
+        this.queue = result.then(() => undefined, () => undefined);
+        return await result;
+    }
+}
+//# sourceMappingURL=prime-plus-hid.js.map

package/dist/drivers/steelseries/prime-plus-hid.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"prime-plus-hid.js","sourceRoot":"","sources":["../../../src/drivers/steelseries/prime-plus-hid.ts"],"names":[],"mappings":"AACA,OAAO,EACL,wBAAwB,EACxB,oBAAoB,EACpB,oBAAoB,EACpB,qBAAqB,EACrB,8BAA8B,EAC9B,wCAAwC,EACxC,+BAA+B,EAC/B,oCAAoC,EACpC,uCAAuC,EACvC,qCAAqC,EACrC,+BAA+B,GAGhC,MAAM,iCAAiC,CAAC;AAEzC,kFAAkF;AAClF,MAAM,gBAAgB,GAAG,EAAE,CAAC;AAC5B,iGAAiG;AACjG,MAAM,WAAW,GAAG,GAAG,CAAC;AACxB,MAAM,kBAAkB,GAAG,IAAI,CAAC;AAEhC;;;;;;;;;;;;;;;;;;;;;GAqBG;AACH,MAAM,OAAO,6BAA6B;IAC/B,MAAM,CAAY;IACnB,KAAK,GAAqB,OAAO,CAAC,OAAO,EAAE,CAAC;IAC5C,WAAW,GAAyD;QAC1E,GAAG,EAAE,IAAI;QACT,aAAa,EAAE,IAAI;KACpB,CAAC;IAEF,YAAY,MAAiB;QAC3B,IAAI,CAAC,MAAM,GAAG,MAAM,CAAC;IACvB,CAAC;IAED,MAAM,CAAC,WAAW,CAAC,MAAiB;QAClC,IAAI,MAAM,CAAC,QAAQ,KAAK,qBAAqB;YAAE,OAAO,KAAK,CAAC;QAC5D,MAAM,OAAO,GAAG,oBAAoB,CAAC,GAAG,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC;QAC3D,OAAO,OAAO,EAAE,MAAM,KAAK,YAAY,CAAC;IAC1C,CAAC;IAED,IAAI,cAAc,KAAa,OAAO,MAAM,CAAC,CAAC,CAAC;IAE/C,IAAI,qBAAqB,KAAe,OAAO,CAAC,GAAG,wBAAwB,CAAC,CAAC,CAAC,CAAC;IAE/E,aAAa,KAAe,OAAO,8BAA8B,EAAE,CAAC,CAAC,CAAC;IAEtE,KAAK,CAAC,IAAI;QACR,IAAI,CAAC,IAAI,CAAC,MAAM,CAAC,MAAM;YAAE,MAAM,IAAI,CAAC,MAAM,CAAC,IAAI,EAAE,CAAC;IACpD,CAAC;IAED,KAAK,CAAC,KAAK;QACT,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM;YAAE,MAAM,IAAI,CAAC,MAAM,CAAC,KAAK,EAAE,CAAC;IACpD,CAAC;IAED,KAAK,CAAC,UAAU;QACd,OAAO,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YAC/B,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,GAAG,IAAI,CAAC,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,IAAI,oBAAoB,CAAC;YACrE,OAAO;gBACL,KAAK,EAAE,aAAa;gBACpB,IAAI;gBACJ,EAAE,EAAE;oBACF,MAAM,EAAE,wBAAwB;oBAChC,aAAa,EAAE,IAAI;oBACnB,cAAc,EAAE,KAAK;oBACrB,2BAA2B,EAAE,IAAI;oBACjC,kBAAkB,EAAE,IAAI;oBACxB,WAAW,EAAE,oHAAoH;oBACjI,kBAAkB,EAAE,oBAAoB;iBACzC;gBACD,cAAc,EAAE,IAAI;gBACpB,YAAY,EAAE,SAAS;gBACvB,GAAG,EAAE,IAAI,CAAC,WAAW,CAAC,GAAG,IAAI,WAAW;gBACxC,aAAa,EAAE,IAAI,CAAC,WAAW,CAAC,aAAa,IAAI,kBAAkB;gBACnE,qBAAqB,EAAE,IAAI,CAAC,qBAAqB;gBACjD,aAAa,EAAE,IAAI;gBACnB,cAAc,EAAE,OAAO;gBACvB,eAAe,EAAE,IAAI;gBACrB,QAAQ,EAAE,EAAE;aACb,CAAC;QACJ,CAAC,CAAC,CAAC;IACL,CAAC;IAED;;;;OAIG;IACH,KAAK,CAAC,MAAM,CAAC,GAAW;QACtB,MAAM,MAAM,GAAG,oCAAoC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC,CAAC;QAC9D,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,+BAA+B,EAAE,CAAC,CAAC;YACpD,IAAI,CAAC,WAAW,CAAC,GAAG,GAAG,GAAG,CAAC;QAC7B,CAAC,CAAC,CAAC;QACH,OAAO,GAAG,CAAC;IACb,CAAC;IAED,KAAK,CAAC,cAAc,CAAC,aAAqB;QACxC,MAAM,MAAM,GAAG,qCAAqC,CAAC,aAAa,CAAC,CAAC;QACpE,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,+BAA+B,EAAE,CAAC,CAAC;YACpD,IAAI,CAAC,WAAW,CAAC,aAAa,GAAG,aAAa,CAAC;QACjD,CAAC,CAAC,CAAC;QACH,OAAO,aAAa,CAAC;IACvB,CAAC;IAED,KAAK,CAAC,QAAQ,CAAC,CAAS,EAAE,CAAS,EAAE,CAAS;QAC5C,MAAM,MAAM,GAAG,+BAA+B,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC;QACxD,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,+BAA+B,EAAE,CAAC,CAAC;QACtD,CAAC,CAAC,CAAC;IACL,CAAC;IAED,KAAK,CAAC,gBAAgB,CAAC,KAAa;QAClC,MAAM,MAAM,GAAG,uCAAuC,CAAC,KAAK,CAAC,CAAC;QAC9D,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,+BAA+B,EAAE,CAAC,CAAC;QACtD,CAAC,CAAC,CAAC;IACL,CAAC;IAED,KAAK,CAAC,iBAAiB,CAAC,OAAoE;QAC1F,MAAM,MAAM,GAAG,wCAAwC,CAAC,OAAO,CAAC,CAAC;QACjE,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,+BAA+B,EAAE,CAAC,CAAC;QACtD,CAAC,CAAC,CAAC;IACL,CAAC;IAEO,KAAK,CAAC,KAAK,CAAC,OAAmB;QACrC,MAAM,IAAI,CAAC,MAAM,CAAC,UAAU,CAAC,oBAAoB,EAAE,OAAO,CAAC,MAAqB,CAAC,CAAC;IACpF,CAAC;IAEO,KAAK,CAAC,YAAoB;QAChC,OAAO,IAAI,OAAO,CAAC,CAAC,OAAO,EAAE,EAAE,CAAC,UAAU,CAAC,OAAO,EAAE,YAAY,CAAC,CAAC,CAAC;IACrE,CAAC;IAEO,KAAK,CAAC,GAAG,CAAI,SAA2B;QAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,SAAS,EAAE,SAAS,CAAC,CAAC;QACrD,IAAI,CAAC,KAAK,GAAG,MAAM,CAAC,IAAI,CAAC,GAAG,EAAE,CAAC,SAAS,EAAE,GAAG,EAAE,CAAC,SAAS,CAAC,CAAC;QAC3D,OAAO,MAAM,MAAM,CAAC;IACtB,CAAC;CACF"}

package/dist/drivers/steelseries/rival3-wireless-hid.d.ts

@@ -0,0 +1,61 @@
+import type { MouseStatus } from "../mouse-types.js";
+import { type Rival3WirelessButtonAction, type Rival3WirelessButtonName } from "@openmouse/protocol/steelseries";
+/**
+ * SteelSeries Rival 3 Wireless WebHID control (`1038:1830`, 2.4 GHz mode).
+ *
+ * DPI presets, polling rate, and buttons are write-only, same as Rival 3
+ * Gen 1 and Aerox 3 — `rival3_wireless.py` defines no getter for any of the
+ * three. Unlike either of those wired devices, this one **is** partially
+ * readable: `battery_level` (`AA 01`) reports charge percentage and charging
+ * state, and `firmware_version` (`90 00`) reports firmware, both via
+ * input-report replies to output-report queries, same pattern as
+ * `SteelSeriesRival3HidClient`'s `10 00` probe. `readStatus` uses the
+ * battery query as its connectivity probe (it is the value most worth
+ * reading live for a wireless mouse) and also reads firmware; DPI and
+ * polling rate remain the session's last-written values (or rivalcfg's
+ * documented defaults before any write), with `valuesVerified: false`
+ * reflecting that those two specific values are still unread.
+ *
+ * The config channel is hidapi interface 3, per `rival3_wireless.py`'s
+ * `"endpoint": 3` model entry; its WebHID collection shape has not been
+ * captured yet, so the picker offers every interface and the wrong ones
+ * fail the battery probe loudly.
+ */
+export declare class SteelSeriesRival3WirelessHidClient {
+    readonly device: HIDDevice;
+    private queue;
+    private listenerAttached;
+    private readonly inputWaiters;
+    private lastWritten;
+    private readonly onInputReport;
+    constructor(device: HIDDevice);
+    static isSupported(device: HIDDevice): boolean;
+    get pollIntervalMs(): number;
+    get supportedPollingRates(): number[];
+    getDpiOptions(): number[];
+    open(): Promise<void>;
+    close(): Promise<void>;
+    readStatus(): Promise<MouseStatus>;
+    /**
+     * Replaces the mouse's DPI preset table with a single preset. The device
+     * does not expose a getter for DPI, so the existing presets cannot be read
+     * and preserved — record them in SteelSeries GG before testing, per
+     * docs/steelseries-testing.md.
+     */
+    setDpi(dpi: number): Promise<number>;
+    setPollingRate(pollingRateHz: number): Promise<number>;
+    setButtonsMapping(mapping: Partial<Record<Rival3WirelessButtonName, Rival3WirelessButtonAction>>): Promise<void>;
+    /**
+     * `AA 01` — battery percentage and charging state. Doubles as the proof
+     * that the granted interface is the config channel, same role Rival 3
+     * Gen 1's firmware probe plays.
+     */
+    private probeBattery;
+    /** `90 00` — firmware version, read the same way as the battery probe. */
+    private probeFirmware;
+    private awaitResponse;
+    private write;
+    private delay;
+    private run;
+}
+//# sourceMappingURL=rival3-wireless-hid.d.ts.map

package/dist/drivers/steelseries/rival3-wireless-hid.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"rival3-wireless-hid.d.ts","sourceRoot":"","sources":["../../../src/drivers/steelseries/rival3-wireless-hid.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,mBAAmB,CAAC;AACrD,OAAO,EAeL,KAAK,0BAA0B,EAC/B,KAAK,wBAAwB,EAE9B,MAAM,iCAAiC,CAAC;AAUzC;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,qBAAa,kCAAkC;IAC7C,QAAQ,CAAC,MAAM,EAAE,SAAS,CAAC;IAC3B,OAAO,CAAC,KAAK,CAAuC;IACpD,OAAO,CAAC,gBAAgB,CAAS;IACjC,OAAO,CAAC,QAAQ,CAAC,YAAY,CAA4C;IACzE,OAAO,CAAC,WAAW,CAGjB;IAEF,OAAO,CAAC,QAAQ,CAAC,aAAa,CAK5B;gBAEU,MAAM,EAAE,SAAS;IAI7B,MAAM,CAAC,WAAW,CAAC,MAAM,EAAE,SAAS,GAAG,OAAO;IAK9C,IAAI,cAAc,IAAI,MAAM,CAAmB;IAE/C,IAAI,qBAAqB,IAAI,MAAM,EAAE,CAA+C;IAEpF,aAAa,IAAI,MAAM,EAAE;IAEnB,IAAI,IAAI,OAAO,CAAC,IAAI,CAAC;IAQrB,KAAK,IAAI,OAAO,CAAC,IAAI,CAAC;IAQtB,UAAU,IAAI,OAAO,CAAC,WAAW,CAAC;IAgCxC;;;;;OAKG;IACG,MAAM,CAAC,GAAG,EAAE,MAAM,GAAG,OAAO,CAAC,MAAM,CAAC;IAYpC,cAAc,CAAC,aAAa,EAAE,MAAM,GAAG,OAAO,CAAC,MAAM,CAAC;IAYtD,iBAAiB,CAAC,OAAO,EAAE,OAAO,CAAC,MAAM,CAAC,wBAAwB,EAAE,0BAA0B,CAAC,CAAC,GAAG,OAAO,CAAC,IAAI,CAAC;IAUtH;;;;OAIG;YACW,YAAY;IAU1B,0EAA0E;YAC5D,aAAa;YAQb,aAAa;YAeb,KAAK;IAInB,OAAO,CAAC,KAAK;YAIC,GAAG;CAKlB"}

package/dist/drivers/steelseries/rival3-wireless-hid.js

@@ -0,0 +1,185 @@
+import { RIVAL3_WIRELESS_POLLING_RATES, STEELSERIES_PRODUCTS, STEELSERIES_VENDOR_ID, RIVAL3_WIRELESS_REPORT_ID, steelseriesRival3WirelessBatteryQuery, steelseriesRival3WirelessDecodeBattery, steelseriesRival3WirelessDecodeFirmware, steelseriesRival3WirelessDpiOptions, steelseriesRival3WirelessEncodeButtonsMapping, steelseriesRival3WirelessEncodeDpiPresets, steelseriesRival3WirelessEncodePollingRate, steelseriesRival3WirelessFirmwareQuery, steelseriesRival3WirelessSaveCommand, } from "@openmouse/protocol/steelseries";
+/** rivalcfg's `command_approve_delay`, shared across every SteelSeries family. */
+const COMMAND_DELAY_MS = 50;
+/** rivalcfg reads input-report replies with a 200 ms timeout; allow slack. */
+const RESPONSE_TIMEOUT_MS = 500;
+/** rivalcfg profile default (`rival3_wireless.py`: "400, 800, 1200, 2400, 3200"). */
+const DEFAULT_DPI = 400;
+const DEFAULT_POLLING_HZ = 1000;
+/**
+ * SteelSeries Rival 3 Wireless WebHID control (`1038:1830`, 2.4 GHz mode).
+ *
+ * DPI presets, polling rate, and buttons are write-only, same as Rival 3
+ * Gen 1 and Aerox 3 — `rival3_wireless.py` defines no getter for any of the
+ * three. Unlike either of those wired devices, this one **is** partially
+ * readable: `battery_level` (`AA 01`) reports charge percentage and charging
+ * state, and `firmware_version` (`90 00`) reports firmware, both via
+ * input-report replies to output-report queries, same pattern as
+ * `SteelSeriesRival3HidClient`'s `10 00` probe. `readStatus` uses the
+ * battery query as its connectivity probe (it is the value most worth
+ * reading live for a wireless mouse) and also reads firmware; DPI and
+ * polling rate remain the session's last-written values (or rivalcfg's
+ * documented defaults before any write), with `valuesVerified: false`
+ * reflecting that those two specific values are still unread.
+ *
+ * The config channel is hidapi interface 3, per `rival3_wireless.py`'s
+ * `"endpoint": 3` model entry; its WebHID collection shape has not been
+ * captured yet, so the picker offers every interface and the wrong ones
+ * fail the battery probe loudly.
+ */
+export class SteelSeriesRival3WirelessHidClient {
+    device;
+    queue = Promise.resolve();
+    listenerAttached = false;
+    inputWaiters = new Set();
+    lastWritten = {
+        dpi: null,
+        pollingRateHz: null,
+    };
+    onInputReport = (event) => {
+        const payload = new Uint8Array(event.data.buffer.slice(event.data.byteOffset, event.data.byteOffset + event.data.byteLength));
+        for (const finish of [...this.inputWaiters])
+            finish(payload);
+    };
+    constructor(device) {
+        this.device = device;
+    }
+    static isSupported(device) {
+        if (device.vendorId !== STEELSERIES_VENDOR_ID)
+            return false;
+        return STEELSERIES_PRODUCTS.get(device.productId)?.family === "rival3-wireless";
+    }
+    get pollIntervalMs() { return 30_000; }
+    get supportedPollingRates() { return [...RIVAL3_WIRELESS_POLLING_RATES]; }
+    getDpiOptions() { return steelseriesRival3WirelessDpiOptions(); }
+    async open() {
+        if (!this.device.opened)
+            await this.device.open();
+        if (!this.listenerAttached) {
+            this.device.addEventListener("inputreport", this.onInputReport);
+            this.listenerAttached = true;
+        }
+    }
+    async close() {
+        if (this.listenerAttached) {
+            this.device.removeEventListener("inputreport", this.onInputReport);
+            this.listenerAttached = false;
+        }
+        if (this.device.opened)
+            await this.device.close();
+    }
+    async readStatus() {
+        return await this.run(async () => {
+            await this.open();
+            const battery = await this.probeBattery();
+            const firmware = await this.probeFirmware();
+            const product = STEELSERIES_PRODUCTS.get(this.device.productId);
+            const name = this.device.productName?.trim() || `SteelSeries ${product?.model ?? "Rival 3 Wireless"}`;
+            return {
+                brand: "SteelSeries",
+                name,
+                ui: {
+                    family: "steelseries-rival3-wireless",
+                    settingsReady: true,
+                    valuesVerified: false,
+                    hideUnsupportedPollingRates: true,
+                    hideProcessingCard: true,
+                    pollingNote: "The Rival 3 Wireless cannot report its current DPI or polling rate; values shown are the last written by this app, or assumed defaults.",
+                    defaultDisplayName: "SteelSeries Rival 3 Wireless",
+                },
+                batteryPercent: battery.level,
+                batteryState: battery.isCharging ? "Charging" : "Discharging",
+                dpi: this.lastWritten.dpi ?? DEFAULT_DPI,
+                pollingRateHz: this.lastWritten.pollingRateHz ?? DEFAULT_POLLING_HZ,
+                supportedPollingRates: this.supportedPollingRates,
+                activeProfile: null,
+                connectionType: "Wireless",
+                liftOffDistance: null,
+                firmware: [firmware.display],
+            };
+        });
+    }
+    /**
+     * Replaces the mouse's DPI preset table with a single preset. The device
+     * does not expose a getter for DPI, so the existing presets cannot be read
+     * and preserved — record them in SteelSeries GG before testing, per
+     * docs/steelseries-testing.md.
+     */
+    async setDpi(dpi) {
+        const report = steelseriesRival3WirelessEncodeDpiPresets([dpi], 0);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesRival3WirelessSaveCommand());
+            this.lastWritten.dpi = dpi;
+        });
+        return dpi;
+    }
+    async setPollingRate(pollingRateHz) {
+        const report = steelseriesRival3WirelessEncodePollingRate(pollingRateHz);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesRival3WirelessSaveCommand());
+            this.lastWritten.pollingRateHz = pollingRateHz;
+        });
+        return pollingRateHz;
+    }
+    async setButtonsMapping(mapping) {
+        const report = steelseriesRival3WirelessEncodeButtonsMapping(mapping);
+        await this.run(async () => {
+            await this.open();
+            await this.write(report);
+            await this.delay(COMMAND_DELAY_MS);
+            await this.write(steelseriesRival3WirelessSaveCommand());
+        });
+    }
+    /**
+     * `AA 01` — battery percentage and charging state. Doubles as the proof
+     * that the granted interface is the config channel, same role Rival 3
+     * Gen 1's firmware probe plays.
+     */
+    async probeBattery() {
+        const payload = await this.awaitResponse(steelseriesRival3WirelessBatteryQuery());
+        if (!payload) {
+            throw new Error("The Rival 3 Wireless did not answer on this interface. Close SteelSeries GG (and the SteelSeriesEngine service); if it still does not answer, add the device again and choose another entry.");
+        }
+        return steelseriesRival3WirelessDecodeBattery(payload);
+    }
+    /** `90 00` — firmware version, read the same way as the battery probe. */
+    async probeFirmware() {
+        const payload = await this.awaitResponse(steelseriesRival3WirelessFirmwareQuery());
+        if (!payload) {
+            throw new Error("The Rival 3 Wireless did not answer the firmware query on this interface.");
+        }
+        return steelseriesRival3WirelessDecodeFirmware(payload);
+    }
+    async awaitResponse(query) {
+        const response = new Promise((resolve) => {
+            let timer;
+            const finish = (payload) => {
+                clearTimeout(timer);
+                this.inputWaiters.delete(finish);
+                resolve(payload);
+            };
+            timer = setTimeout(() => finish(null), RESPONSE_TIMEOUT_MS);
+            this.inputWaiters.add(finish);
+        });
+        await this.write(query);
+        return await response;
+    }
+    async write(payload) {
+        await this.device.sendReport(RIVAL3_WIRELESS_REPORT_ID, payload.buffer);
+    }
+    delay(milliseconds) {
+        return new Promise((resolve) => setTimeout(resolve, milliseconds));
+    }
+    async run(operation) {
+        const result = this.queue.then(operation, operation);
+        this.queue = result.then(() => undefined, () => undefined);
+        return await result;
+    }
+}
+//# sourceMappingURL=rival3-wireless-hid.js.map

package/dist/drivers/steelseries/rival3-wireless-hid.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"rival3-wireless-hid.js","sourceRoot":"","sources":["../../../src/drivers/steelseries/rival3-wireless-hid.ts"],"names":[],"mappings":"AACA,OAAO,EACL,6BAA6B,EAC7B,oBAAoB,EACpB,qBAAqB,EACrB,yBAAyB,EACzB,qCAAqC,EACrC,sCAAsC,EACtC,uCAAuC,EACvC,mCAAmC,EACnC,6CAA6C,EAC7C,yCAAyC,EACzC,0CAA0C,EAC1C,sCAAsC,EACtC,oCAAoC,GAKrC,MAAM,iCAAiC,CAAC;AAEzC,kFAAkF;AAClF,MAAM,gBAAgB,GAAG,EAAE,CAAC;AAC5B,8EAA8E;AAC9E,MAAM,mBAAmB,GAAG,GAAG,CAAC;AAChC,qFAAqF;AACrF,MAAM,WAAW,GAAG,GAAG,CAAC;AACxB,MAAM,kBAAkB,GAAG,IAAI,CAAC;AAEhC;;;;;;;;;;;;;;;;;;;;GAoBG;AACH,MAAM,OAAO,kCAAkC;IACpC,MAAM,CAAY;IACnB,KAAK,GAAqB,OAAO,CAAC,OAAO,EAAE,CAAC;IAC5C,gBAAgB,GAAG,KAAK,CAAC;IAChB,YAAY,GAAG,IAAI,GAAG,EAAiC,CAAC;IACjE,WAAW,GAAyD;QAC1E,GAAG,EAAE,IAAI;QACT,aAAa,EAAE,IAAI;KACpB,CAAC;IAEe,aAAa,GAAG,CAAC,KAA0B,EAAQ,EAAE;QACpE,MAAM,OAAO,GAAG,IAAI,UAAU,CAC5B,KAAK,CAAC,IAAI,CAAC,MAAM,CAAC,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC,UAAU,EAAE,KAAK,CAAC,IAAI,CAAC,UAAU,GAAG,KAAK,CAAC,IAAI,CAAC,UAAU,CAAC,CAC9F,CAAC;QACF,KAAK,MAAM,MAAM,IAAI,CAAC,GAAG,IAAI,CAAC,YAAY,CAAC;YAAE,MAAM,CAAC,OAAO,CAAC,CAAC;IAC/D,CAAC,CAAC;IAEF,YAAY,MAAiB;QAC3B,IAAI,CAAC,MAAM,GAAG,MAAM,CAAC;IACvB,CAAC;IAED,MAAM,CAAC,WAAW,CAAC,MAAiB;QAClC,IAAI,MAAM,CAAC,QAAQ,KAAK,qBAAqB;YAAE,OAAO,KAAK,CAAC;QAC5D,OAAO,oBAAoB,CAAC,GAAG,CAAC,MAAM,CAAC,SAAS,CAAC,EAAE,MAAM,KAAK,iBAAiB,CAAC;IAClF,CAAC;IAED,IAAI,cAAc,KAAa,OAAO,MAAM,CAAC,CAAC,CAAC;IAE/C,IAAI,qBAAqB,KAAe,OAAO,CAAC,GAAG,6BAA6B,CAAC,CAAC,CAAC,CAAC;IAEpF,aAAa,KAAe,OAAO,mCAAmC,EAAE,CAAC,CAAC,CAAC;IAE3E,KAAK,CAAC,IAAI;QACR,IAAI,CAAC,IAAI,CAAC,MAAM,CAAC,MAAM;YAAE,MAAM,IAAI,CAAC,MAAM,CAAC,IAAI,EAAE,CAAC;QAClD,IAAI,CAAC,IAAI,CAAC,gBAAgB,EAAE,CAAC;YAC3B,IAAI,CAAC,MAAM,CAAC,gBAAgB,CAAC,aAAa,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;YAChE,IAAI,CAAC,gBAAgB,GAAG,IAAI,CAAC;QAC/B,CAAC;IACH,CAAC;IAED,KAAK,CAAC,KAAK;QACT,IAAI,IAAI,CAAC,gBAAgB,EAAE,CAAC;YAC1B,IAAI,CAAC,MAAM,CAAC,mBAAmB,CAAC,aAAa,EAAE,IAAI,CAAC,aAAa,CAAC,CAAC;YACnE,IAAI,CAAC,gBAAgB,GAAG,KAAK,CAAC;QAChC,CAAC;QACD,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM;YAAE,MAAM,IAAI,CAAC,MAAM,CAAC,KAAK,EAAE,CAAC;IACpD,CAAC;IAED,KAAK,CAAC,UAAU;QACd,OAAO,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YAC/B,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,OAAO,GAAG,MAAM,IAAI,CAAC,YAAY,EAAE,CAAC;YAC1C,MAAM,QAAQ,GAAG,MAAM,IAAI,CAAC,aAAa,EAAE,CAAC;YAC5C,MAAM,OAAO,GAAG,oBAAoB,CAAC,GAAG,CAAC,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC;YAChE,MAAM,IAAI,GAAG,IAAI,CAAC,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,IAAI,eAAe,OAAO,EAAE,KAAK,IAAI,kBAAkB,EAAE,CAAC;YACtG,OAAO;gBACL,KAAK,EAAE,aAAa;gBACpB,IAAI;gBACJ,EAAE,EAAE;oBACF,MAAM,EAAE,6BAA6B;oBACrC,aAAa,EAAE,IAAI;oBACnB,cAAc,EAAE,KAAK;oBACrB,2BAA2B,EAAE,IAAI;oBACjC,kBAAkB,EAAE,IAAI;oBACxB,WAAW,EAAE,yIAAyI;oBACtJ,kBAAkB,EAAE,8BAA8B;iBACnD;gBACD,cAAc,EAAE,OAAO,CAAC,KAAK;gBAC7B,YAAY,EAAE,OAAO,CAAC,UAAU,CAAC,CAAC,CAAC,UAAU,CAAC,CAAC,CAAC,aAAa;gBAC7D,GAAG,EAAE,IAAI,CAAC,WAAW,CAAC,GAAG,IAAI,WAAW;gBACxC,aAAa,EAAE,IAAI,CAAC,WAAW,CAAC,aAAa,IAAI,kBAAkB;gBACnE,qBAAqB,EAAE,IAAI,CAAC,qBAAqB;gBACjD,aAAa,EAAE,IAAI;gBACnB,cAAc,EAAE,UAAU;gBAC1B,eAAe,EAAE,IAAI;gBACrB,QAAQ,EAAE,CAAC,QAAQ,CAAC,OAAO,CAAC;aAC7B,CAAC;QACJ,CAAC,CAAC,CAAC;IACL,CAAC;IAED;;;;;OAKG;IACH,KAAK,CAAC,MAAM,CAAC,GAAW;QACtB,MAAM,MAAM,GAAG,yCAAyC,CAAC,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC,CAAC;QACnE,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,oCAAoC,EAAE,CAAC,CAAC;YACzD,IAAI,CAAC,WAAW,CAAC,GAAG,GAAG,GAAG,CAAC;QAC7B,CAAC,CAAC,CAAC;QACH,OAAO,GAAG,CAAC;IACb,CAAC;IAED,KAAK,CAAC,cAAc,CAAC,aAAqB;QACxC,MAAM,MAAM,GAAG,0CAA0C,CAAC,aAAa,CAAC,CAAC;QACzE,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,oCAAoC,EAAE,CAAC,CAAC;YACzD,IAAI,CAAC,WAAW,CAAC,aAAa,GAAG,aAAa,CAAC;QACjD,CAAC,CAAC,CAAC;QACH,OAAO,aAAa,CAAC;IACvB,CAAC;IAED,KAAK,CAAC,iBAAiB,CAAC,OAA8E;QACpG,MAAM,MAAM,GAAG,6CAA6C,CAAC,OAAO,CAAC,CAAC;QACtE,MAAM,IAAI,CAAC,GAAG,CAAC,KAAK,IAAI,EAAE;YACxB,MAAM,IAAI,CAAC,IAAI,EAAE,CAAC;YAClB,MAAM,IAAI,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;YACzB,MAAM,IAAI,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC;YACnC,MAAM,IAAI,CAAC,KAAK,CAAC,oCAAoC,EAAE,CAAC,CAAC;QAC3D,CAAC,CAAC,CAAC;IACL,CAAC;IAED;;;;OAIG;IACK,KAAK,CAAC,YAAY;QACxB,MAAM,OAAO,GAAG,MAAM,IAAI,CAAC,aAAa,CAAC,qCAAqC,EAAE,CAAC,CAAC;QAClF,IAAI,CAAC,OAAO,EAAE,CAAC;YACb,MAAM,IAAI,KAAK,CACb,8LAA8L,CAC/L,CAAC;QACJ,CAAC;QACD,OAAO,sCAAsC,CAAC,OAAO,CAAC,CAAC;IACzD,CAAC;IAED,0EAA0E;IAClE,KAAK,CAAC,aAAa;QACzB,MAAM,OAAO,GAAG,MAAM,IAAI,CAAC,aAAa,CAAC,sCAAsC,EAAE,CAAC,CAAC;QACnF,IAAI,CAAC,OAAO,EAAE,CAAC;YACb,MAAM,IAAI,KAAK,CAAC,2EAA2E,CAAC,CAAC;QAC/F,CAAC;QACD,OAAO,uCAAuC,CAAC,OAAO,CAAC,CAAC;IAC1D,CAAC;IAEO,KAAK,CAAC,aAAa,CAAC,KAAiB;QAC3C,MAAM,QAAQ,GAAG,IAAI,OAAO,CAAoB,CAAC,OAAO,EAAE,EAAE;YAC1D,IAAI,KAAoC,CAAC;YACzC,MAAM,MAAM,GAAG,CAAC,OAA0B,EAAQ,EAAE;gBAClD,YAAY,CAAC,KAAK,CAAC,CAAC;gBACpB,IAAI,CAAC,YAAY,CAAC,MAAM,CAAC,MAAuC,CAAC,CAAC;gBAClE,OAAO,CAAC,OAAO,CAAC,CAAC;YACnB,CAAC,CAAC;YACF,KAAK,GAAG,UAAU,CAAC,GAAG,EAAE,CAAC,MAAM,CAAC,IAAI,CAAC,EAAE,mBAAmB,CAAC,CAAC;YAC5D,IAAI,CAAC,YAAY,CAAC,GAAG,CAAC,MAAuC,CAAC,CAAC;QACjE,CAAC,CAAC,CAAC;QACH,MAAM,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,CAAC;QACxB,OAAO,MAAM,QAAQ,CAAC;IACxB,CAAC;IAEO,KAAK,CAAC,KAAK,CAAC,OAAmB;QACrC,MAAM,IAAI,CAAC,MAAM,CAAC,UAAU,CAAC,yBAAyB,EAAE,OAAO,CAAC,MAAqB,CAAC,CAAC;IACzF,CAAC;IAEO,KAAK,CAAC,YAAoB;QAChC,OAAO,IAAI,OAAO,CAAC,CAAC,OAAO,EAAE,EAAE,CAAC,UAAU,CAAC,OAAO,EAAE,YAAY,CAAC,CAAC,CAAC;IACrE,CAAC;IAEO,KAAK,CAAC,GAAG,CAAI,SAA2B;QAC9C,MAAM,MAAM,GAAG,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,SAAS,EAAE,SAAS,CAAC,CAAC;QACrD,IAAI,CAAC,KAAK,GAAG,MAAM,CAAC,IAAI,CAAC,GAAG,EAAE,CAAC,SAAS,EAAE,GAAG,EAAE,CAAC,SAAS,CAAC,CAAC;QAC3D,OAAO,MAAM,MAAM,CAAC;IACtB,CAAC;CACF"}

package/dist/drivers/steelseries/rival310-hid.d.ts

@@ -0,0 +1,59 @@
+import type { MouseStatus } from "../mouse-types.js";
+import { type Rival310ButtonAction, type Rival310ButtonName, type Rival310Led } from "@openmouse/protocol/steelseries";
+/**
+ * SteelSeries Rival 310 WebHID control (`1038:1720`, `1038:171E` CS:GO Howl
+ * Edition, `1038:1736` PUBG Edition — one shared command set, see
+ * `../../steelseries/rival310.ts`'s doc comment).
+ *
+ * The device is write-only for settings: only the two-byte firmware version
+ * (`90 00`) can be read back, and this driver uses it as its connectivity
+ * probe, same pattern as `./hid.ts`'s Rival 3 Gen 1 client. `readStatus`
+ * therefore reports the session's last-written DPI/polling values (or
+ * rivalcfg's documented defaults before any write) with
+ * `valuesVerified: false` — it never pretends to have read them from the
+ * mouse. Every setter follows its write with the save command so the change
+ * persists in the mouse's onboard memory, mirroring rivalcfg's CLI default.
+ *
+ * The config channel is hidapi `endpoint 0`, per `rival310.py`'s model
+ * entries; its WebHID collection shape has not been captured yet, so the
+ * picker offers every interface and the wrong ones fail the firmware probe
+ * loudly, same as Rival 3 Gen 1.
+ *
+ * LED color writes are HID **feature** reports, not output reports (see
+ * `steelseriesRival310EncodeLedColor`'s doc comment) — `setLedColor` routes
+ * through `device.sendFeatureReport`, unlike every other setter here.
+ */
+export declare class SteelSeriesRival310HidClient {
+    readonly device: HIDDevice;
+    private queue;
+    private listenerAttached;
+    private readonly inputWaiters;
+    private lastWritten;
+    private readonly onInputReport;
+    constructor(device: HIDDevice);
+    static isSupported(device: HIDDevice): boolean;
+    get pollIntervalMs(): number;
+    get supportedPollingRates(): number[];
+    getDpiOptions(): number[];
+    open(): Promise<void>;
+    close(): Promise<void>;
+    readStatus(): Promise<MouseStatus>;
+    /**
+     * Writes sensitivity preset 1 only. The device is write-only, so the
+     * existing preset 2 and button/lighting configuration cannot be read and
+     * preserved — record them before testing, per docs/steelseries-testing.md.
+     */
+    setDpi(dpi: number): Promise<number>;
+    setPollingRate(pollingRateHz: number): Promise<number>;
+    setLedColor(led: Rival310Led, r: number, g: number, b: number): Promise<void>;
+    setButtonsMapping(mapping: Partial<Record<Rival310ButtonName, Rival310ButtonAction>>): Promise<void>;
+    /**
+     * The `90 00` firmware query is the device's only readable value, so it
+     * doubles as the proof that the granted interface is the config channel.
+     */
+    private probeFirmware;
+    private write;
+    private delay;
+    private run;
+}
+//# sourceMappingURL=rival310-hid.d.ts.map

package/dist/drivers/steelseries/rival310-hid.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"rival310-hid.d.ts","sourceRoot":"","sources":["../../../src/drivers/steelseries/rival310-hid.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,mBAAmB,CAAC;AACrD,OAAO,EAaL,KAAK,oBAAoB,EACzB,KAAK,kBAAkB,EACvB,KAAK,WAAW,EAEjB,MAAM,iCAAiC,CAAC;AAUzC;;;;;;;;;;;;;;;;;;;;;;GAsBG;AACH,qBAAa,4BAA4B;IACvC,QAAQ,CAAC,MAAM,EAAE,SAAS,CAAC;IAC3B,OAAO,CAAC,KAAK,CAAuC;IACpD,OAAO,CAAC,gBAAgB,CAAS;IACjC,OAAO,CAAC,QAAQ,CAAC,YAAY,CAA4C;IACzE,OAAO,CAAC,WAAW,CAGjB;IAEF,OAAO,CAAC,QAAQ,CAAC,aAAa,CAK5B;gBAEU,MAAM,EAAE,SAAS;IAI7B,MAAM,CAAC,WAAW,CAAC,MAAM,EAAE,SAAS,GAAG,OAAO;IAK9C,IAAI,cAAc,IAAI,MAAM,CAAmB;IAE/C,IAAI,qBAAqB,IAAI,MAAM,EAAE,CAAwC;IAE7E,aAAa,IAAI,MAAM,EAAE;IAEnB,IAAI,IAAI,OAAO,CAAC,IAAI,CAAC;IAQrB,KAAK,IAAI,OAAO,CAAC,IAAI,CAAC;IAQtB,UAAU,IAAI,OAAO,CAAC,WAAW,CAAC;IA+BxC;;;;OAIG;IACG,MAAM,CAAC,GAAG,EAAE,MAAM,GAAG,OAAO,CAAC,MAAM,CAAC;IAYpC,cAAc,CAAC,aAAa,EAAE,MAAM,GAAG,OAAO,CAAC,MAAM,CAAC;IAYtD,WAAW,CAAC,GAAG,EAAE,WAAW,EAAE,CAAC,EAAE,MAAM,EAAE,CAAC,EAAE,MAAM,EAAE,CAAC,EAAE,MAAM,GAAG,OAAO,CAAC,IAAI,CAAC;IAU7E,iBAAiB,CAAC,OAAO,EAAE,OAAO,CAAC,MAAM,CAAC,kBAAkB,EAAE,oBAAoB,CAAC,CAAC,GAAG,OAAO,CAAC,IAAI,CAAC;IAU1G;;;OAGG;YACW,aAAa;YAqBb,KAAK;IAInB,OAAO,CAAC,KAAK;YAIC,GAAG;CAKlB"}