@openmouse/protocol 0.1.0

package/dist/steelseries/rival3-wireless.js

@@ -0,0 +1,308 @@
+/**
+ * SteelSeries Rival 3 Wireless configuration protocol — pure encode/decode helpers.
+ *
+ * Reconstructed from public open-source implementations, not vendor software:
+ *
+ * - rivalcfg `rivalcfg/devices/rival3_wireless.py` — the primary source for
+ *   every command byte, product id, and default here. Read in full for this
+ *   cluster; not assumed from any other SteelSeries device file.
+ * - rivalcfg `rivalcfg/devices/dpi/truemove_air.py` — the DPI byte table for
+ *   this device's TrueMove Air sensor. **This is a distinct table from
+ *   `./rival3.ts`'s `TRUEMOVE_CORE_DPI_TO_BYTE`** (used by Rival 3 Gen 1 and
+ *   Aerox 3): TrueMove Air starts at 100 DPI (Core starts at 200), covers
+ *   100–18000 in 100 DPI steps (180 entries; Core tops out at 8500 in 84
+ *   entries), and the byte values at shared DPI numbers differ (e.g.
+ *   400 DPI is `0x04` here vs. `0x08` for Core; 1600 DPI is `0x12` here vs.
+ *   `0x24` for Core). Reusing Core's table for this device would silently
+ *   set the wrong sensitivity, so this module defines its own
+ *   `TRUEMOVE_AIR_DPI_TO_BYTE` and does not import Core's.
+ * - rivalcfg `rivalcfg/handlers/multidpi_range_choice.py` — the DPI preset
+ *   packet shape, same handler as Rival 3 Gen 1/Aerox 3 but with
+ *   `dpi_length_byte: 2` (little-endian two bytes per preset — Rival 3 Gen 1
+ *   and Aerox 3 both use one byte per preset, so a preset list here is twice
+ *   as long as an equivalent list for those families).
+ * - rivalcfg `rivalcfg/handlers/buttons/buttons.py` — the fixed-width button
+ *   field layout, 6 buttons only (no `scrollUp`/`scrollDown` remap *slots* —
+ *   this device profile has no such button entries — though `ScrollUp`
+ *   (`0x31`) and `ScrollDown` (`0x32`) remain valid remap *targets*, same as
+ *   `dpi` (`0x30`)).
+ * - rivalcfg's `usbhid.py` / `mouse.py` framing conventions, shared with
+ *   `./rival3.ts` and `./aerox3.ts` (unnumbered HID output reports on the
+ *   vendor configuration interface, `"endpoint": 3`).
+ *
+ * ## Why this is a separate protocol family from Rival 3 Gen 1 and Aerox 3
+ *
+ * Despite the shared "Rival 3" name, `rival3_wireless.py` is confirmed as a
+ * genuinely separate command set from both siblings, verified directly from
+ * the source rather than assumed from the family name:
+ *
+ * - Product id `1038:1830` ("2.4 GHz mode", endpoint 3) — distinct from Rival
+ *   3 Gen 1's `1038:1824`/`184C` and Aerox 3's `1038:1836`.
+ * - Sensitivity command `0x20` (single-byte prefix, like Aerox 3's `0x2D` but
+ *   a different byte) vs. Rival 3 Gen 1's two-byte `0x0B 0x00`.
+ * - Polling command `0x17` with choices `{125:0x03, 250:0x02, 500:0x01,
+ *   1000:0x00}` — the same four rates as Gen 1/Aerox 3 but a **different
+ *   command byte** (`0x17` here vs. `0x04 0x00` / `0x2B`); the value mapping
+ *   is byte-identical, only the command prefix differs.
+ * - Buttons command `0x19` vs. Gen 1's undocumented `0x07 0x00` and Aerox 3's
+ *   `0x2A`.
+ * - Save command `0x09` (**one byte**) — distinct from Rival 3 Gen 1's
+ *   `0x09 0x00` (two bytes, same leading byte, easy to confuse) and Aerox 3's
+ *   `0x11 0x00`.
+ * - Firmware query `0x90 0x00` — distinct from Rival 3 Gen 1's `0x10 0x00`.
+ *   Aerox 3 has no firmware query at all.
+ * - A `battery_level` read (`0xAA 0x01`, three-byte response) that neither
+ *   Rival 3 Gen 1 nor Aerox 3 profile defines at all — see below.
+ *
+ * `rivalcfg/devices/devices.py`'s `SUPPORTED_DEVICES` lists `rival3_wireless`
+ * and `rival3_wireless_gen2` (`1038:1872`) as separate profile modules from
+ * each other and from `rival3.py`/`aerox3.py`; nothing here claims `0x1872`
+ * — the Wireless Gen 2 is a different device with its own (unread) command
+ * set and is out of scope for this cluster.
+ *
+ * No corroborating libratbag or OpenRGB source for this exact device/PID was
+ * available in this environment (no local libratbag checkout, and OpenRGB's
+ * SteelSeries controllers were not searched for a Rival 3 Wireless-specific
+ * file this pass) — every command byte above is sourced from rivalcfg alone.
+ * This should be treated as a single-source reconstruction until corroborated
+ * or hardware-verified.
+ *
+ * ## Battery / charging read — this device IS partially readable
+ *
+ * Unlike the wired Rival 3 Gen 1 and Aerox 3 (write-only, no getters at
+ * all), `rival3_wireless.py` defines a top-level `battery_level` block: an
+ * output-report write of `0xAA 0x01` gets a 3-byte input-report reply, where
+ * `data[0]` is the battery percentage (`level`) and `data[2]` is a
+ * charging boolean (`is_charging`, `bool(data[2])`) — `data[1]` is unused by
+ * rivalcfg's lambdas. This module exposes `steelseriesRival3WirelessBatteryQuery`
+ * / `steelseriesRival3WirelessDecodeBattery` so the HID client can wire a real
+ * `readStatus` battery read instead of reporting `batteryState: "Unknown"`.
+ * The firmware query (`0x90 0x00`, 2-byte reply) is also readable, following
+ * the same pattern as `./rival3.ts`'s `10 00`.
+ *
+ * DPI presets, polling rate, and buttons remain write-only: `rival3_wireless.py`
+ * defines no getter for any of the three, same as every other SteelSeries
+ * profile in rivalcfg.
+ *
+ * Settings apply immediately; the save command (`09`) persists them to
+ * onboard flash, mirroring the other two families' CLI default. None of this
+ * has been verified on physical hardware by this project.
+ */
+export const RIVAL3_WIRELESS_REPORT_ID = 0x00;
+/** Command prefixes; length varies by command, matching rivalcfg exactly. */
+export const RIVAL3_WIRELESS_COMMAND = {
+    sensitivity: [0x20],
+    pollingRate: [0x17],
+    buttonsMapping: [0x19],
+    /** `AA 01` — battery percentage + charging state, 3-byte input-report reply. */
+    batteryLevel: [0xaa, 0x01],
+    /** One byte — distinct from Rival 3 Gen 1's two-byte `09 00`. */
+    save: [0x09],
+    /** `90 00` — distinct from Rival 3 Gen 1's `10 00`. */
+    firmware: [0x90, 0x00],
+};
+export const RIVAL3_WIRELESS_POLLING_RATES = [125, 250, 500, 1000];
+const POLLING_RATE_TO_BYTE = new Map([
+    [1000, 0x00],
+    [500, 0x01],
+    [250, 0x02],
+    [125, 0x03],
+]);
+export const RIVAL3_WIRELESS_DPI_MIN = 100;
+export const RIVAL3_WIRELESS_DPI_MAX = 18000;
+export const RIVAL3_WIRELESS_DPI_STEP = 100;
+export const RIVAL3_WIRELESS_MAX_DPI_PRESETS = 5;
+export const RIVAL3_WIRELESS_FIRMWARE_RESPONSE_LENGTH = 2;
+export const RIVAL3_WIRELESS_BATTERY_RESPONSE_LENGTH = 3;
+/**
+ * rivalcfg's TrueMove Air sensor table (`devices/dpi/truemove_air.py`), the
+ * sensor used by the Rival 3 Wireless — **not** the TrueMove Core table
+ * `./rival3.ts` exports. Values pinned in `rival3-wireless.test.ts` against
+ * the source file: 100→0x00, 400→0x04, 1600→0x12, 18000→0xD6.
+ */
+export const TRUEMOVE_AIR_DPI_TO_BYTE = new Map([
+    [100, 0x00], [200, 0x02], [300, 0x03], [400, 0x04], [500, 0x05], [600, 0x06],
+    [700, 0x07], [800, 0x09], [900, 0x0a], [1000, 0x0b], [1100, 0x0c], [1200, 0x0d],
+    [1300, 0x0e], [1400, 0x10], [1500, 0x11], [1600, 0x12], [1700, 0x13], [1800, 0x14],
+    [1900, 0x16], [2000, 0x17], [2100, 0x18], [2200, 0x19], [2300, 0x1a], [2400, 0x1b],
+    [2500, 0x1d], [2600, 0x1e], [2700, 0x1f], [2800, 0x20], [2900, 0x21], [3000, 0x23],
+    [3100, 0x25], [3200, 0x26], [3300, 0x27], [3400, 0x28], [3500, 0x29], [3600, 0x2a],
+    [3700, 0x2c], [3800, 0x2d], [3900, 0x2e], [4000, 0x2f], [4100, 0x30], [4200, 0x32],
+    [4300, 0x33], [4400, 0x34], [4500, 0x35], [4600, 0x36], [4700, 0x38], [4800, 0x39],
+    [4900, 0x3a], [5000, 0x3b], [5100, 0x3c], [5200, 0x3e], [5300, 0x3f], [5400, 0x40],
+    [5500, 0x41], [5600, 0x42], [5700, 0x44], [5800, 0x45], [5900, 0x46], [6000, 0x47],
+    [6100, 0x48], [6200, 0x4a], [6300, 0x4b], [6400, 0x4c], [6500, 0x4d], [6600, 0x4e],
+    [6700, 0x50], [6800, 0x51], [6900, 0x52], [7000, 0x53], [7100, 0x54], [7200, 0x56],
+    [7300, 0x57], [7400, 0x58], [7500, 0x59], [7600, 0x5a], [7700, 0x5c], [7800, 0x5d],
+    [7900, 0x5e], [8000, 0x5f], [8100, 0x60], [8200, 0x62], [8300, 0x63], [8400, 0x64],
+    [8500, 0x65], [8600, 0x66], [8700, 0x68], [8800, 0x69], [8900, 0x6a], [9000, 0x6b],
+    [9100, 0x6c], [9200, 0x6e], [9300, 0x6f], [9400, 0x70], [9500, 0x71], [9600, 0x72],
+    [9700, 0x74], [9800, 0x75], [9900, 0x76], [10000, 0x77], [10100, 0x78], [10200, 0x7a],
+    [10300, 0x7b], [10400, 0x7c], [10500, 0x7d], [10600, 0x7e], [10700, 0x80], [10800, 0x81],
+    [10900, 0x82], [11000, 0x83], [11100, 0x84], [11200, 0x86], [11300, 0x87], [11400, 0x88],
+    [11500, 0x89], [11600, 0x8a], [11700, 0x8c], [11800, 0x8d], [11900, 0x8e], [12000, 0x8f],
+    [12100, 0x90], [12200, 0x92], [12300, 0x93], [12400, 0x94], [12500, 0x95], [12600, 0x96],
+    [12700, 0x98], [12800, 0x99], [12900, 0x9a], [13000, 0x9b], [13100, 0x9c], [13200, 0x9e],
+    [13300, 0x9f], [13400, 0xa0], [13500, 0xa1], [13600, 0xa2], [13700, 0xa4], [13800, 0xa5],
+    [13900, 0xa6], [14000, 0xa7], [14100, 0xa8], [14200, 0xaa], [14300, 0xab], [14400, 0xac],
+    [14500, 0xad], [14600, 0xae], [14700, 0xb0], [14800, 0xb1], [14900, 0xb2], [15000, 0xb3],
+    [15100, 0xb4], [15200, 0xb5], [15300, 0xb6], [15400, 0xb7], [15500, 0xb8], [15600, 0xb9],
+    [15700, 0xba], [15800, 0xbb], [15900, 0xbc], [16000, 0xbd], [16100, 0xbf], [16200, 0xc0],
+    [16300, 0xc2], [16400, 0xc3], [16500, 0xc4], [16600, 0xc5], [16700, 0xc6], [16800, 0xc7],
+    [16900, 0xc9], [17000, 0xca], [17100, 0xcb], [17200, 0xcc], [17300, 0xcd], [17400, 0xcf],
+    [17500, 0xd0], [17600, 0xd1], [17700, 0xd2], [17800, 0xd3], [17900, 0xd5], [18000, 0xd6],
+]);
+export class Rival3WirelessProtocolError extends Error {
+}
+/** The 180 DPI values the TrueMove Air sensor table can express, ascending. */
+export function steelseriesRival3WirelessDpiOptions() {
+    return [...TRUEMOVE_AIR_DPI_TO_BYTE.keys()].sort((a, b) => a - b);
+}
+/**
+ * `20 <count> <selected> <v1_lo> <v1_hi>…<vN_lo> <vN_hi>` — replaces the
+ * mouse's whole preset table. Two little-endian bytes per DPI
+ * (`dpi_length_byte: 2`, unlike Rival 3 Gen 1/Aerox 3's one byte); the high
+ * byte is always `0x00` since the TrueMove Air table only produces values up
+ * to `0xD6`, but both bytes are always sent to match the wire format exactly.
+ * `selectedIndex` is 0-based here and encoded 1-based on the wire
+ * (`first_preset: 1`).
+ */
+export function steelseriesRival3WirelessEncodeDpiPresets(presets, selectedIndex) {
+    if (presets.length < 1 || presets.length > RIVAL3_WIRELESS_MAX_DPI_PRESETS) {
+        throw new Rival3WirelessProtocolError(`SteelSeries Rival 3 Wireless supports 1–${RIVAL3_WIRELESS_MAX_DPI_PRESETS} DPI presets.`);
+    }
+    if (!Number.isInteger(selectedIndex) || selectedIndex < 0 || selectedIndex >= presets.length) {
+        throw new Rival3WirelessProtocolError(`Selected DPI preset must be an index into the ${presets.length} presets being written.`);
+    }
+    const encoded = [];
+    for (const dpi of presets) {
+        const byte = TRUEMOVE_AIR_DPI_TO_BYTE.get(dpi);
+        if (byte === undefined) {
+            throw new Rival3WirelessProtocolError(`SteelSeries Rival 3 Wireless DPI must be ${RIVAL3_WIRELESS_DPI_MIN}–${RIVAL3_WIRELESS_DPI_MAX.toLocaleString()} in ${RIVAL3_WIRELESS_DPI_STEP} DPI steps.`);
+        }
+        encoded.push(byte & 0xff, 0x00);
+    }
+    return new Uint8Array([
+        ...RIVAL3_WIRELESS_COMMAND.sensitivity,
+        presets.length,
+        selectedIndex + 1,
+        ...encoded,
+    ]);
+}
+/** `17 <v>` with 1000→0x00, 500→0x01, 250→0x02, 125→0x03 (different byte order than Rival 3 Gen 1/Aerox 3). */
+export function steelseriesRival3WirelessEncodePollingRate(pollingRateHz) {
+    const byte = POLLING_RATE_TO_BYTE.get(pollingRateHz);
+    if (byte === undefined) {
+        throw new Rival3WirelessProtocolError("SteelSeries Rival 3 Wireless supports 125, 250, 500, or 1000 Hz polling.");
+    }
+    return new Uint8Array([...RIVAL3_WIRELESS_COMMAND.pollingRate, byte]);
+}
+/** `09` — commit the current settings to onboard flash. One byte, unlike Rival 3 Gen 1's `09 00`. */
+export function steelseriesRival3WirelessSaveCommand() {
+    return new Uint8Array(RIVAL3_WIRELESS_COMMAND.save);
+}
+/** `90 00` — the device answers with a two-byte input report. */
+export function steelseriesRival3WirelessFirmwareQuery() {
+    return new Uint8Array(RIVAL3_WIRELESS_COMMAND.firmware);
+}
+/** Decode the two-byte firmware response, same read-order convention as `./rival3.ts`. */
+export function steelseriesRival3WirelessDecodeFirmware(payload) {
+    if (payload.length < RIVAL3_WIRELESS_FIRMWARE_RESPONSE_LENGTH) {
+        throw new Rival3WirelessProtocolError("SteelSeries Rival 3 Wireless firmware response is shorter than two bytes.");
+    }
+    const bytes = [payload[0], payload[1]];
+    return { bytes, display: `${bytes[0]}.${bytes[1]}` };
+}
+/** `AA 01` — the device answers with a three-byte input report (level, unused, charging). */
+export function steelseriesRival3WirelessBatteryQuery() {
+    return new Uint8Array(RIVAL3_WIRELESS_COMMAND.batteryLevel);
+}
+/**
+ * Decode the three-byte battery response: `data[0]` is the percentage
+ * (rivalcfg's `level` lambda, `int(data[0])`), `data[2]` is charging state
+ * (rivalcfg's `is_charging` lambda, `bool(data[2])`). `data[1]` is present in
+ * the response but unused by either rivalcfg lambda.
+ */
+export function steelseriesRival3WirelessDecodeBattery(payload) {
+    if (payload.length < RIVAL3_WIRELESS_BATTERY_RESPONSE_LENGTH) {
+        throw new Rival3WirelessProtocolError("SteelSeries Rival 3 Wireless battery response is shorter than three bytes.");
+    }
+    return { level: payload[0], isCharging: payload[2] !== 0 };
+}
+/** `buttons_mapping.buttons` from `rival3_wireless.py`, id + byte offset into the packet. */
+export const RIVAL3_WIRELESS_BUTTONS = {
+    button1: { id: 0x01, offset: 0x00 },
+    button2: { id: 0x02, offset: 0x05 },
+    button3: { id: 0x03, offset: 0x0a },
+    button4: { id: 0x04, offset: 0x0f },
+    button5: { id: 0x05, offset: 0x14 },
+    button6: { id: 0x06, offset: 0x19 },
+};
+const RIVAL3_WIRELESS_BUTTON_FIELD_LENGTH = 5;
+const RIVAL3_WIRELESS_BUTTON_DISABLE = 0x00;
+const RIVAL3_WIRELESS_BUTTON_DPI_SWITCH = 0x30;
+const RIVAL3_WIRELESS_BUTTON_SCROLL_UP = 0x31;
+const RIVAL3_WIRELESS_BUTTON_SCROLL_DOWN = 0x32;
+const RIVAL3_WIRELESS_BUTTON_KEYBOARD = 0x51;
+const RIVAL3_WIRELESS_BUTTON_MULTIMEDIA = 0x61;
+/**
+ * `19` + one 30-byte (`6 buttons × 5-byte field length`) packet, zero-filled
+ * except where a mapping is given. Unmapped buttons are left as all-zero
+ * fields (rivalcfg instead fills in per-button defaults; this codec leaves
+ * that policy to the caller — pass every button explicitly for parity with
+ * rivalcfg's default profile).
+ */
+export function steelseriesRival3WirelessEncodeButtonsMapping(mapping) {
+    const names = Object.keys(RIVAL3_WIRELESS_BUTTONS);
+    const packet = new Array(names.length * RIVAL3_WIRELESS_BUTTON_FIELD_LENGTH).fill(0x00);
+    for (const [name, action] of Object.entries(mapping)) {
+        const slot = RIVAL3_WIRELESS_BUTTONS[name];
+        if (!slot) {
+            throw new Rival3WirelessProtocolError(`Unknown SteelSeries Rival 3 Wireless button "${name}".`);
+        }
+        const { offset } = slot;
+        switch (action.type) {
+            case "button": {
+                packet[offset] = RIVAL3_WIRELESS_BUTTONS[action.target].id;
+                break;
+            }
+            case "disabled": {
+                packet[offset] = RIVAL3_WIRELESS_BUTTON_DISABLE;
+                break;
+            }
+            case "dpiSwitch": {
+                packet[offset] = RIVAL3_WIRELESS_BUTTON_DPI_SWITCH;
+                break;
+            }
+            case "scrollUp": {
+                packet[offset] = RIVAL3_WIRELESS_BUTTON_SCROLL_UP;
+                break;
+            }
+            case "scrollDown": {
+                packet[offset] = RIVAL3_WIRELESS_BUTTON_SCROLL_DOWN;
+                break;
+            }
+            case "keyboard": {
+                if (!Number.isInteger(action.code) || action.code < 0 || action.code > 255) {
+                    throw new Rival3WirelessProtocolError("Keyboard scan codes must be integers 0–255.");
+                }
+                packet[offset] = RIVAL3_WIRELESS_BUTTON_KEYBOARD;
+                packet[offset + 1] = action.code;
+                break;
+            }
+            case "multimedia": {
+                if (!Number.isInteger(action.code) || action.code < 0 || action.code > 255) {
+                    throw new Rival3WirelessProtocolError("Multimedia key codes must be integers 0–255.");
+                }
+                packet[offset] = RIVAL3_WIRELESS_BUTTON_MULTIMEDIA;
+                packet[offset + 1] = action.code;
+                break;
+            }
+            default: {
+                throw new Rival3WirelessProtocolError("Unsupported SteelSeries Rival 3 Wireless button action.");
+            }
+        }
+    }
+    return new Uint8Array([...RIVAL3_WIRELESS_COMMAND.buttonsMapping, ...packet]);
+}
+//# sourceMappingURL=rival3-wireless.js.map

package/dist/steelseries/rival3-wireless.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"rival3-wireless.js","sourceRoot":"","sources":["../../src/steelseries/rival3-wireless.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAyFG;AAEH,MAAM,CAAC,MAAM,yBAAyB,GAAG,IAAI,CAAC;AAE9C,6EAA6E;AAC7E,MAAM,CAAC,MAAM,uBAAuB,GAAG;IACrC,WAAW,EAAE,CAAC,IAAI,CAAC;IACnB,WAAW,EAAE,CAAC,IAAI,CAAC;IACnB,cAAc,EAAE,CAAC,IAAI,CAAC;IACtB,gFAAgF;IAChF,YAAY,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAC1B,iEAAiE;IACjE,IAAI,EAAE,CAAC,IAAI,CAAC;IACZ,uDAAuD;IACvD,QAAQ,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;CACd,CAAC;AAEX,MAAM,CAAC,MAAM,6BAA6B,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,IAAI,CAAU,CAAC;AAE5E,MAAM,oBAAoB,GAAgC,IAAI,GAAG,CAAC;IAChE,CAAC,IAAI,EAAE,IAAI,CAAC;IACZ,CAAC,GAAG,EAAE,IAAI,CAAC;IACX,CAAC,GAAG,EAAE,IAAI,CAAC;IACX,CAAC,GAAG,EAAE,IAAI,CAAC;CACZ,CAAC,CAAC;AAEH,MAAM,CAAC,MAAM,uBAAuB,GAAG,GAAG,CAAC;AAC3C,MAAM,CAAC,MAAM,uBAAuB,GAAG,KAAK,CAAC;AAC7C,MAAM,CAAC,MAAM,wBAAwB,GAAG,GAAG,CAAC;AAC5C,MAAM,CAAC,MAAM,+BAA+B,GAAG,CAAC,CAAC;AACjD,MAAM,CAAC,MAAM,wCAAwC,GAAG,CAAC,CAAC;AAC1D,MAAM,CAAC,MAAM,uCAAuC,GAAG,CAAC,CAAC;AAEzD;;;;;GAKG;AACH,MAAM,CAAC,MAAM,wBAAwB,GAAg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lF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACrF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;IACxF,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC,EAAE,CAAC,KAAK,EAAE,IAAI,CAAC;CACzF,CAAC,CAAC;AAEH,MAAM,OAAO,2BAA4B,SAAQ,KAAK;CAAG;AAEzD,+EAA+E;AAC/E,MAAM,UAAU,mCAAmC;IACjD,OAAO,CAAC,GAAG,wBAAwB,CAAC,IAAI,EAAE,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;AACpE,CAAC;AAED;;;;;;;;GAQG;AACH,MAAM,UAAU,yCAAyC,CACvD,OAA0B,EAC1B,aAAqB;IAErB,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC,IAAI,OAAO,CAAC,MAAM,GAAG,+BAA+B,EAAE,CAAC;QAC3E,MAAM,IAAI,2BAA2B,CACnC,2CAA2C,+BAA+B,eAAe,CAC1F,CAAC;IACJ,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,aAAa,CAAC,IAAI,aAAa,GAAG,CAAC,IAAI,aAAa,IAAI,OAAO,CAAC,MAAM,EAAE,CAAC;QAC7F,MAAM,IAAI,2BAA2B,CACnC,iDAAiD,OAAO,CAAC,MAAM,yBAAyB,CACzF,CAAC;IACJ,CAAC;IACD,MAAM,OAAO,GAAa,EAAE,CAAC;IAC7B,KAAK,MAAM,GAAG,IAAI,OAAO,EAAE,CAAC;QAC1B,MAAM,IAAI,GAAG,wBAAwB,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC;QAC/C,IAAI,IAAI,KAAK,SAAS,EAAE,CAAC;YACvB,MAAM,IAAI,2BAA2B,CACnC,4CAA4C,uBAAuB,IAAI,uBAAuB,CAAC,cAAc,EAAE,OAAO,wBAAwB,aAAa,CAC5J,CAAC;QACJ,CAAC;QACD,OAAO,CAAC,IAAI,CAAC,IAAI,GAAG,IAAI,EAAE,IAAI,CAAC,CAAC;IAClC,CAAC;IACD,OAAO,IAAI,UAAU,CAAC;QACpB,GAAG,uBAAuB,CAAC,WAAW;QACtC,OAAO,CAAC,MAAM;QACd,aAAa,GAAG,CAAC;QACjB,GAAG,OAAO;KACX,CAAC,CAAC;AACL,CAAC;AAED,+GAA+G;AAC/G,MAAM,UAAU,0CAA0C,CAAC,aAAqB;IAC9E,MAAM,IAAI,GAAG,oBAAoB,CAAC,GAAG,CAAC,aAAa,CAAC,CAAC;IACrD,IAAI,IAAI,KAAK,SAAS,EAAE,CAAC;QACvB,MAAM,IAAI,2BAA2B,CACnC,0EAA0E,CAC3E,CAAC;IACJ,CAAC;IACD,OAAO,IAAI,UAAU,CAAC,CAAC,GAAG,uBAAuB,CAAC,WAAW,EAAE,IAAI,CAAC,CAAC,CAAC;AACxE,CAAC;AAED,qGAAqG;AACrG,MAAM,UAAU,oCAAoC;IAClD,OAAO,IAAI,UAAU,CAAC,uBAAuB,CAAC,IAAI,CAAC,CAAC;AACtD,CAAC;AAED,iEAAiE;AACjE,MAAM,UAAU,sCAAsC;IACpD,OAAO,IAAI,UAAU,CAAC,uBAAuB,CAAC,QAAQ,CAAC,CAAC;AAC1D,CAAC;AASD,0FAA0F;AAC1F,MAAM,UAAU,uCAAuC,CAAC,OAAmB;IACzE,IAAI,OAAO,CAAC,MAAM,GAAG,wCAAwC,EAAE,CAAC;QAC9D,MAAM,IAAI,2BAA2B,CACnC,2EAA2E,CAC5E,CAAC;IACJ,CAAC;IACD,MAAM,KAAK,GAAqB,CAAC,OAAO,CAAC,CAAC,CAAE,EAAE,OAAO,CAAC,CAAC,CAAE,CAAC,CAAC;IAC3D,OAAO,EAAE,KAAK,EAAE,OAAO,EAAE,GAAG,KAAK,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC;AACvD,CAAC;AAED,6FAA6F;AAC7F,MAAM,UAAU,qCAAqC;IACnD,OAAO,IAAI,UAAU,CAAC,uBAAuB,CAAC,YAAY,CAAC,CAAC;AAC9D,CAAC;AASD;;;;;GAKG;AACH,MAAM,UAAU,sCAAsC,CAAC,OAAmB;IACxE,IAAI,OAAO,CAAC,MAAM,GAAG,uCAAuC,EAAE,CAAC;QAC7D,MAAM,IAAI,2BAA2B,CACnC,4EAA4E,CAC7E,CAAC;IACJ,CAAC;IACD,OAAO,EAAE,KAAK,EAAE,OAAO,CAAC,CAAC,CAAE,EAAE,UAAU,EAAE,OAAO,CAAC,CAAC,CAAE,KAAK,CAAC,EAAE,CAAC;AAC/D,CAAC;AASD,6FAA6F;AAC7F,MAAM,CAAC,MAAM,uBAAuB,GAAG;IACrC,OAAO,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE;IACnC,OAAO,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE;IACnC,OAAO,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE;IACnC,OAAO,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE;IACnC,OAAO,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE;IACnC,OAAO,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE;CACwB,CAAC;AAI9D,MAAM,mCAAmC,GAAG,CAAC,CAAC;AAC9C,MAAM,8BAA8B,GAAG,IAAI,CAAC;AAC5C,MAAM,iCAAiC,GAAG,IAAI,CAAC;AAC/C,MAAM,gCAAgC,GAAG,IAAI,CAAC;AAC9C,MAAM,kCAAkC,GAAG,IAAI,CAAC;AAChD,MAAM,+BAA+B,GAAG,IAAI,CAAC;AAC7C,MAAM,iCAAiC,GAAG,IAAI,CAAC;AAkB/C;;;;;;GAMG;AACH,MAAM,UAAU,6CAA6C,CAC3D,OAA8E;IAE9E,MAAM,KAAK,GAAG,MAAM,CAAC,IAAI,CAAC,uBAAuB,CAA+B,CAAC;IACjF,MAAM,MAAM,GAAG,IAAI,KAAK,CAAS,KAAK,CAAC,MAAM,GAAG,mCAAmC,CAAC,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;IAEhG,KAAK,MAAM,CAAC,IAAI,EAAE,MAAM,CAAC,IAAI,MAAM,CAAC,OAAO,CAAC,OAAO,CAAkE,EAAE,CAAC;QACtH,MAAM,IAAI,GAAG,uBAAuB,CAAC,IAAI,CAAC,CAAC;QAC3C,IAAI,CAAC,IAAI,EAAE,CAAC;YACV,MAAM,IAAI,2BAA2B,CAAC,gDAAgD,IAAI,IAAI,CAAC,CAAC;QAClG,CAAC;QACD,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;QACxB,QAAQ,MAAM,CAAC,IAAI,EAAE,CAAC;YACpB,KAAK,QAAQ,CAAC,CAAC,CAAC;gBACd,MAAM,CAAC,MAAM,CAAC,GAAG,uBAAuB,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,EAAE,CAAC;gBAC3D,MAAM;YACR,CAAC;YACD,KAAK,UAAU,CAAC,CAAC,CAAC;gBAChB,MAAM,CAAC,MAAM,CAAC,GAAG,8BAA8B,CAAC;gBAChD,MAAM;YACR,CAAC;YACD,KAAK,WAAW,CAAC,CAAC,CAAC;gBACjB,MAAM,CAAC,MAAM,CAAC,GAAG,iCAAiC,CAAC;gBACnD,MAAM;YACR,CAAC;YACD,KAAK,UAAU,CAAC,CAAC,CAAC;gBAChB,MAAM,CAAC,MAAM,CAAC,GAAG,gCAAgC,CAAC;gBAClD,MAAM;YACR,CAAC;YACD,KAAK,YAAY,CAAC,CAAC,CAAC;gBAClB,MAAM,CAAC,MAAM,CAAC,GAAG,kCAAkC,CAAC;gBACpD,MAAM;YACR,CAAC;YACD,KAAK,UAAU,CAAC,CAAC,CAAC;gBAChB,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,GAAG,CAAC,IAAI,MAAM,CAAC,IAAI,GAAG,GAAG,EAAE,CAAC;oBAC3E,MAAM,IAAI,2BAA2B,CAAC,6CAA6C,CAAC,CAAC;gBACvF,CAAC;gBACD,MAAM,CAAC,MAAM,CAAC,GAAG,+BAA+B,CAAC;gBACjD,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,IAAI,CAAC;gBACjC,MAAM;YACR,CAAC;YACD,KAAK,YAAY,CAAC,CAAC,CAAC;gBAClB,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,GAAG,CAAC,IAAI,MAAM,CAAC,IAAI,GAAG,GAAG,EAAE,CAAC;oBAC3E,MAAM,IAAI,2BAA2B,CAAC,8CAA8C,CAAC,CAAC;gBACxF,CAAC;gBACD,MAAM,CAAC,MAAM,CAAC,GAAG,iCAAiC,CAAC;gBACnD,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,IAAI,CAAC;gBACjC,MAAM;YACR,CAAC;YACD,OAAO,CAAC,CAAC,CAAC;gBACR,MAAM,IAAI,2BAA2B,CAAC,yDAAyD,CAAC,CAAC;YACnG,CAAC;QACH,CAAC;IACH,CAAC;IAED,OAAO,IAAI,UAAU,CAAC,CAAC,GAAG,uBAAuB,CAAC,cAAc,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC;AAChF,CAAC"}

package/dist/steelseries/rival3.d.ts

@@ -0,0 +1,99 @@
+/**
+ * SteelSeries Rival 3 Gen 1 configuration protocol — pure encode/decode helpers.
+ *
+ * Reconstructed from public open-source implementations, not vendor software:
+ *
+ * - rivalcfg `rivalcfg/devices/rival3.py`, `rivalcfg/handlers/multidpi_range_choice.py`,
+ *   `rivalcfg/devices/dpi/truemove_core.py`, `rivalcfg/mouse.py`, `rivalcfg/usbhid.py`
+ *   (https://github.com/flozz/rivalcfg) — the primary source for every byte here.
+ * - libratbag `src/driver-steelseries.c` — corroborates the polling values, the
+ *   save id, the firmware id, and that SteelSeries uses unnumbered reports.
+ * - OpenRGB `SteelSeriesRival3Controller.cpp` — corroborates interface 3, the
+ *   firmware query, and that short unpadded writes are accepted.
+ *
+ * Every command is an HID **output report** with report id 0x00 on the vendor
+ * configuration interface (hidapi `interface_number == 3`). The functions here
+ * build the report *payload* — the bytes after the report id, which the WebHID
+ * driver passes to `sendReport(0x00, …)` separately. rivalcfg sends these
+ * frames unpadded, and that is what this codec produces.
+ *
+ * **This device is write-only.** No public implementation has a getter for
+ * DPI, polling, lighting, or buttons: rivalcfg mirrors state into a local JSON
+ * file because the mouse cannot be asked, and libratbag flags its SteelSeries
+ * profiles `RATBAG_PROFILE_CAP_WRITE_ONLY`. The single readable value is the
+ * two-byte firmware version behind command `10 00`.
+ *
+ * Settings apply immediately; the save command (`09 00`) commits them to
+ * onboard flash (rivalcfg's `--no-save`: "Do not persist settings in the
+ * internal device memory"). Which half of that is volatile has not been
+ * confirmed on hardware yet.
+ *
+ * Known but deliberately not implemented — documented so nobody re-derives
+ * them, withheld until there is a reason and hardware evidence to ship them:
+ *
+ * - `05 00 <zone 1–4> <r> <g> <b> <brightness 0x00–0x64>` — zone color (zone 0 = all)
+ * - `06 00 <0x00–0x06>` — lighting effect (steady = 0x04)
+ * - `07 00` + 8 × 2-byte fields — button mapping
+ *
+ * None of this has been verified on physical hardware by this project.
+ * The Rival 3 Gen 2 (`1038:1870`) and Rival 3 Wireless (`1038:1830`) use
+ * different, incompatible command sets and must not reuse this module.
+ */
+export declare const STEELSERIES_REPORT_ID = 0;
+/** Two-byte command prefixes; the payload is the prefix plus its arguments. */
+export declare const RIVAL3_COMMAND: {
+    readonly pollingRate: readonly [4, 0];
+    readonly save: readonly [9, 0];
+    readonly dpiPresets: readonly [11, 0];
+    readonly firmware: readonly [16, 0];
+};
+export declare const RIVAL3_POLLING_RATES: readonly [125, 250, 500, 1000];
+export declare const RIVAL3_DPI_MIN = 200;
+export declare const RIVAL3_DPI_MAX = 8500;
+export declare const RIVAL3_DPI_STEP = 100;
+export declare const RIVAL3_MAX_DPI_PRESETS = 5;
+export declare const RIVAL3_FIRMWARE_RESPONSE_LENGTH = 2;
+/**
+ * rivalcfg's TrueMove Core sensor table (`devices/dpi/truemove_core.py`):
+ * DPI is sent as one byte from this lookup, not as an integer. The source
+ * ships it as a literal table with no closed-form formula; the increments
+ * follow a repeating +2/+2/+3 pattern, and the values rivalcfg quotes
+ * (200→0x04 … 1200→0x1b, 1600→0x24, 8500→0xc5) are pinned in protocol.test.ts.
+ */
+export declare const TRUEMOVE_CORE_DPI_TO_BYTE: ReadonlyMap<number, number>;
+export declare class SteelSeriesProtocolError extends Error {
+}
+/** The 84 DPI values the sensor table can express, ascending. */
+export declare function steelseriesRival3DpiOptions(): number[];
+/**
+ * `0B 00 <count> <selected> <v1>…<vN>` — replaces the mouse's whole preset
+ * table. `selectedIndex` is 0-based here and encoded 1-based on the wire.
+ *
+ * DPI values must be exact table keys. rivalcfg rounds a request to the
+ * nearest table entry; this codec rejects off-grid values instead, matching
+ * how the rest of this package validates DPI, so a caller is never silently
+ * given a different sensitivity than it asked for.
+ */
+export declare function steelseriesRival3EncodeDpiPresets(presets: readonly number[], selectedIndex: number): Uint8Array;
+/** `04 00 <v>` with 1000→0x01, 500→0x02, 250→0x03, 125→0x04. */
+export declare function steelseriesRival3EncodePollingRate(pollingRateHz: number): Uint8Array;
+/** `09 00` — commit the current settings to onboard flash. */
+export declare function steelseriesRival3SaveCommand(): Uint8Array;
+/** `10 00` — the device answers with a two-byte input report. */
+export declare function steelseriesRival3FirmwareQuery(): Uint8Array;
+export interface SteelSeriesRival3Firmware {
+    /** The two raw response bytes, in the order the device sent them. */
+    bytes: [number, number];
+    /** The bytes joined in read order, e.g. "37.0". */
+    display: string;
+}
+/**
+ * Decode the two-byte firmware response. The byte order is contested between
+ * public implementations — libratbag reads [minor, major], current rivalcfg
+ * joins the bytes in read order, and OpenRGB treats them as a little-endian
+ * word — so both raw bytes are returned and `display` follows rivalcfg's
+ * read-order behavior until hardware (a `1038:184C` unit, known to be firmware
+ * v0.37.0.0) settles which byte is which.
+ */
+export declare function steelseriesRival3DecodeFirmware(payload: Uint8Array): SteelSeriesRival3Firmware;
+//# sourceMappingURL=rival3.d.ts.map

package/dist/steelseries/rival3.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"rival3.d.ts","sourceRoot":"","sources":["../../src/steelseries/rival3.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAwCG;AAEH,eAAO,MAAM,qBAAqB,IAAO,CAAC;AAE1C,+EAA+E;AAC/E,eAAO,MAAM,cAAc;;;;;CAKjB,CAAC;AAEX,eAAO,MAAM,oBAAoB,gCAAiC,CAAC;AASnE,eAAO,MAAM,cAAc,MAAM,CAAC;AAClC,eAAO,MAAM,cAAc,OAAO,CAAC;AACnC,eAAO,MAAM,eAAe,MAAM,CAAC;AACnC,eAAO,MAAM,sBAAsB,IAAI,CAAC;AACxC,eAAO,MAAM,+BAA+B,IAAI,CAAC;AAEjD;;;;;;GAMG;AACH,eAAO,MAAM,yBAAyB,EAAE,WAAW,CAAC,MAAM,EAAE,MAAM,CAehE,CAAC;AAEH,qBAAa,wBAAyB,SAAQ,KAAK;CAAG;AAEtD,iEAAiE;AACjE,wBAAgB,2BAA2B,IAAI,MAAM,EAAE,CAEtD;AAED;;;;;;;;GAQG;AACH,wBAAgB,iCAAiC,CAC/C,OAAO,EAAE,SAAS,MAAM,EAAE,EAC1B,aAAa,EAAE,MAAM,GACpB,UAAU,CAqBZ;AAED,gEAAgE;AAChE,wBAAgB,kCAAkC,CAAC,aAAa,EAAE,MAAM,GAAG,UAAU,CAMpF;AAED,8DAA8D;AAC9D,wBAAgB,4BAA4B,IAAI,UAAU,CAEzD;AAED,iEAAiE;AACjE,wBAAgB,8BAA8B,IAAI,UAAU,CAE3D;AAED,MAAM,WAAW,yBAAyB;IACxC,qEAAqE;IACrE,KAAK,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC;IACxB,mDAAmD;IACnD,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;;;;;;GAOG;AACH,wBAAgB,+BAA+B,CAAC,OAAO,EAAE,UAAU,GAAG,yBAAyB,CAM9F"}

package/dist/steelseries/rival3.js

@@ -0,0 +1,147 @@
+/**
+ * SteelSeries Rival 3 Gen 1 configuration protocol — pure encode/decode helpers.
+ *
+ * Reconstructed from public open-source implementations, not vendor software:
+ *
+ * - rivalcfg `rivalcfg/devices/rival3.py`, `rivalcfg/handlers/multidpi_range_choice.py`,
+ *   `rivalcfg/devices/dpi/truemove_core.py`, `rivalcfg/mouse.py`, `rivalcfg/usbhid.py`
+ *   (https://github.com/flozz/rivalcfg) — the primary source for every byte here.
+ * - libratbag `src/driver-steelseries.c` — corroborates the polling values, the
+ *   save id, the firmware id, and that SteelSeries uses unnumbered reports.
+ * - OpenRGB `SteelSeriesRival3Controller.cpp` — corroborates interface 3, the
+ *   firmware query, and that short unpadded writes are accepted.
+ *
+ * Every command is an HID **output report** with report id 0x00 on the vendor
+ * configuration interface (hidapi `interface_number == 3`). The functions here
+ * build the report *payload* — the bytes after the report id, which the WebHID
+ * driver passes to `sendReport(0x00, …)` separately. rivalcfg sends these
+ * frames unpadded, and that is what this codec produces.
+ *
+ * **This device is write-only.** No public implementation has a getter for
+ * DPI, polling, lighting, or buttons: rivalcfg mirrors state into a local JSON
+ * file because the mouse cannot be asked, and libratbag flags its SteelSeries
+ * profiles `RATBAG_PROFILE_CAP_WRITE_ONLY`. The single readable value is the
+ * two-byte firmware version behind command `10 00`.
+ *
+ * Settings apply immediately; the save command (`09 00`) commits them to
+ * onboard flash (rivalcfg's `--no-save`: "Do not persist settings in the
+ * internal device memory"). Which half of that is volatile has not been
+ * confirmed on hardware yet.
+ *
+ * Known but deliberately not implemented — documented so nobody re-derives
+ * them, withheld until there is a reason and hardware evidence to ship them:
+ *
+ * - `05 00 <zone 1–4> <r> <g> <b> <brightness 0x00–0x64>` — zone color (zone 0 = all)
+ * - `06 00 <0x00–0x06>` — lighting effect (steady = 0x04)
+ * - `07 00` + 8 × 2-byte fields — button mapping
+ *
+ * None of this has been verified on physical hardware by this project.
+ * The Rival 3 Gen 2 (`1038:1870`) and Rival 3 Wireless (`1038:1830`) use
+ * different, incompatible command sets and must not reuse this module.
+ */
+export const STEELSERIES_REPORT_ID = 0x00;
+/** Two-byte command prefixes; the payload is the prefix plus its arguments. */
+export const RIVAL3_COMMAND = {
+    pollingRate: [0x04, 0x00],
+    save: [0x09, 0x00],
+    dpiPresets: [0x0b, 0x00],
+    firmware: [0x10, 0x00],
+};
+export const RIVAL3_POLLING_RATES = [125, 250, 500, 1000];
+const POLLING_RATE_TO_BYTE = new Map([
+    [1000, 0x01],
+    [500, 0x02],
+    [250, 0x03],
+    [125, 0x04],
+]);
+export const RIVAL3_DPI_MIN = 200;
+export const RIVAL3_DPI_MAX = 8500;
+export const RIVAL3_DPI_STEP = 100;
+export const RIVAL3_MAX_DPI_PRESETS = 5;
+export const RIVAL3_FIRMWARE_RESPONSE_LENGTH = 2;
+/**
+ * rivalcfg's TrueMove Core sensor table (`devices/dpi/truemove_core.py`):
+ * DPI is sent as one byte from this lookup, not as an integer. The source
+ * ships it as a literal table with no closed-form formula; the increments
+ * follow a repeating +2/+2/+3 pattern, and the values rivalcfg quotes
+ * (200→0x04 … 1200→0x1b, 1600→0x24, 8500→0xc5) are pinned in protocol.test.ts.
+ */
+export const TRUEMOVE_CORE_DPI_TO_BYTE = new Map([
+    [200, 0x04], [300, 0x06], [400, 0x08], [500, 0x0b], [600, 0x0d], [700, 0x0f],
+    [800, 0x12], [900, 0x14], [1000, 0x16], [1100, 0x19], [1200, 0x1b], [1300, 0x1d],
+    [1400, 0x20], [1500, 0x22], [1600, 0x24], [1700, 0x27], [1800, 0x29], [1900, 0x2b],
+    [2000, 0x2e], [2100, 0x30], [2200, 0x32], [2300, 0x35], [2400, 0x37], [2500, 0x39],
+    [2600, 0x3c], [2700, 0x3e], [2800, 0x40], [2900, 0x43], [3000, 0x45], [3100, 0x47],
+    [3200, 0x4a], [3300, 0x4c], [3400, 0x4e], [3500, 0x51], [3600, 0x53], [3700, 0x55],
+    [3800, 0x58], [3900, 0x5a], [4000, 0x5c], [4100, 0x5f], [4200, 0x61], [4300, 0x63],
+    [4400, 0x66], [4500, 0x68], [4600, 0x6a], [4700, 0x6d], [4800, 0x6f], [4900, 0x71],
+    [5000, 0x74], [5100, 0x76], [5200, 0x78], [5300, 0x7b], [5400, 0x7d], [5500, 0x7f],
+    [5600, 0x82], [5700, 0x84], [5800, 0x86], [5900, 0x89], [6000, 0x8b], [6100, 0x8d],
+    [6200, 0x90], [6300, 0x92], [6400, 0x94], [6500, 0x97], [6600, 0x99], [6700, 0x9b],
+    [6800, 0x9e], [6900, 0xa0], [7000, 0xa2], [7100, 0xa5], [7200, 0xa7], [7300, 0xa9],
+    [7400, 0xac], [7500, 0xae], [7600, 0xb0], [7700, 0xb3], [7800, 0xb5], [7900, 0xb7],
+    [8000, 0xba], [8100, 0xbc], [8200, 0xbe], [8300, 0xc1], [8400, 0xc3], [8500, 0xc5],
+]);
+export class SteelSeriesProtocolError extends Error {
+}
+/** The 84 DPI values the sensor table can express, ascending. */
+export function steelseriesRival3DpiOptions() {
+    return [...TRUEMOVE_CORE_DPI_TO_BYTE.keys()].sort((a, b) => a - b);
+}
+/**
+ * `0B 00 <count> <selected> <v1>…<vN>` — replaces the mouse's whole preset
+ * table. `selectedIndex` is 0-based here and encoded 1-based on the wire.
+ *
+ * DPI values must be exact table keys. rivalcfg rounds a request to the
+ * nearest table entry; this codec rejects off-grid values instead, matching
+ * how the rest of this package validates DPI, so a caller is never silently
+ * given a different sensitivity than it asked for.
+ */
+export function steelseriesRival3EncodeDpiPresets(presets, selectedIndex) {
+    if (presets.length < 1 || presets.length > RIVAL3_MAX_DPI_PRESETS) {
+        throw new SteelSeriesProtocolError(`SteelSeries Rival 3 supports 1–${RIVAL3_MAX_DPI_PRESETS} DPI presets.`);
+    }
+    if (!Number.isInteger(selectedIndex) || selectedIndex < 0 || selectedIndex >= presets.length) {
+        throw new SteelSeriesProtocolError(`Selected DPI preset must be an index into the ${presets.length} presets being written.`);
+    }
+    const encoded = presets.map((dpi) => {
+        const byte = TRUEMOVE_CORE_DPI_TO_BYTE.get(dpi);
+        if (byte === undefined) {
+            throw new SteelSeriesProtocolError(`SteelSeries Rival 3 DPI must be ${RIVAL3_DPI_MIN}–${RIVAL3_DPI_MAX.toLocaleString()} in ${RIVAL3_DPI_STEP} DPI steps.`);
+        }
+        return byte;
+    });
+    return new Uint8Array([...RIVAL3_COMMAND.dpiPresets, presets.length, selectedIndex + 1, ...encoded]);
+}
+/** `04 00 <v>` with 1000→0x01, 500→0x02, 250→0x03, 125→0x04. */
+export function steelseriesRival3EncodePollingRate(pollingRateHz) {
+    const byte = POLLING_RATE_TO_BYTE.get(pollingRateHz);
+    if (byte === undefined) {
+        throw new SteelSeriesProtocolError("SteelSeries Rival 3 supports 125, 250, 500, or 1000 Hz polling.");
+    }
+    return new Uint8Array([...RIVAL3_COMMAND.pollingRate, byte]);
+}
+/** `09 00` — commit the current settings to onboard flash. */
+export function steelseriesRival3SaveCommand() {
+    return new Uint8Array(RIVAL3_COMMAND.save);
+}
+/** `10 00` — the device answers with a two-byte input report. */
+export function steelseriesRival3FirmwareQuery() {
+    return new Uint8Array(RIVAL3_COMMAND.firmware);
+}
+/**
+ * Decode the two-byte firmware response. The byte order is contested between
+ * public implementations — libratbag reads [minor, major], current rivalcfg
+ * joins the bytes in read order, and OpenRGB treats them as a little-endian
+ * word — so both raw bytes are returned and `display` follows rivalcfg's
+ * read-order behavior until hardware (a `1038:184C` unit, known to be firmware
+ * v0.37.0.0) settles which byte is which.
+ */
+export function steelseriesRival3DecodeFirmware(payload) {
+    if (payload.length < RIVAL3_FIRMWARE_RESPONSE_LENGTH) {
+        throw new SteelSeriesProtocolError("SteelSeries Rival 3 firmware response is shorter than two bytes.");
+    }
+    const bytes = [payload[0], payload[1]];
+    return { bytes, display: `${bytes[0]}.${bytes[1]}` };
+}
+//# sourceMappingURL=rival3.js.map

package/dist/steelseries/rival3.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"rival3.js","sourceRoot":"","sources":["../../src/steelseries/rival3.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAwCG;AAEH,MAAM,CAAC,MAAM,qBAAqB,GAAG,IAAI,CAAC;AAE1C,+EAA+E;AAC/E,MAAM,CAAC,MAAM,cAAc,GAAG;IAC5B,WAAW,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IACzB,IAAI,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClB,UAAU,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IACxB,QAAQ,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;CACd,CAAC;AAEX,MAAM,CAAC,MAAM,oBAAoB,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,GAAG,EAAE,IAAI,CAAU,CAAC;AAEnE,MAAM,oBAAoB,GAAgC,IAAI,GAAG,CAAC;IAChE,CAAC,IAAI,EAAE,IAAI,CAAC;IACZ,CAAC,GAAG,EAAE,IAAI,CAAC;IACX,CAAC,GAAG,EAAE,IAAI,CAAC;IACX,CAAC,GAAG,EAAE,IAAI,CAAC;CACZ,CAAC,CAAC;AAEH,MAAM,CAAC,MAAM,cAAc,GAAG,GAAG,CAAC;AAClC,MAAM,CAAC,MAAM,cAAc,GAAG,IAAI,CAAC;AACnC,MAAM,CAAC,MAAM,eAAe,GAAG,GAAG,CAAC;AACnC,MAAM,CAAC,MAAM,sBAAsB,GAAG,CAAC,CAAC;AACxC,MAAM,CAAC,MAAM,+BAA+B,GAAG,CAAC,CAAC;AAEjD;;;;;;GAMG;AACH,MAAM,CAAC,MAAM,yBAAyB,GAAgC,IAAI,GAAG,CAAC;IAC5E,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,IAAI,CAAC;IAC5E,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,GAAG,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAChF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;IAClF,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC;CACnF,CAAC,CAAC;AAEH,MAAM,OAAO,wBAAyB,SAAQ,KAAK;CAAG;AAEtD,iEAAiE;AACjE,MAAM,UAAU,2BAA2B;IACzC,OAAO,CAAC,GAAG,yBAAyB,CAAC,IAAI,EAAE,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;AACrE,CAAC;AAED;;;;;;;;GAQG;AACH,MAAM,UAAU,iCAAiC,CAC/C,OAA0B,EAC1B,aAAqB;IAErB,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC,IAAI,OAAO,CAAC,MAAM,GAAG,sBAAsB,EAAE,CAAC;QAClE,MAAM,IAAI,wBAAwB,CAChC,kCAAkC,sBAAsB,eAAe,CACxE,CAAC;IACJ,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,aAAa,CAAC,IAAI,aAAa,GAAG,CAAC,IAAI,aAAa,IAAI,OAAO,CAAC,MAAM,EAAE,CAAC;QAC7F,MAAM,IAAI,wBAAwB,CAChC,iDAAiD,OAAO,CAAC,MAAM,yBAAyB,CACzF,CAAC;IACJ,CAAC;IACD,MAAM,OAAO,GAAG,OAAO,CAAC,GAAG,CAAC,CAAC,GAAG,EAAE,EAAE;QAClC,MAAM,IAAI,GAAG,yBAAyB,CAAC,GAAG,CAAC,GAAG,CAAC,CAAC;QAChD,IAAI,IAAI,KAAK,SAAS,EAAE,CAAC;YACvB,MAAM,IAAI,wBAAwB,CAChC,mCAAmC,cAAc,IAAI,cAAc,CAAC,cAAc,EAAE,OAAO,eAAe,aAAa,CACxH,CAAC;QACJ,CAAC;QACD,OAAO,IAAI,CAAC;IACd,CAAC,CAAC,CAAC;IACH,OAAO,IAAI,UAAU,CAAC,CAAC,GAAG,cAAc,CAAC,UAAU,EAAE,OAAO,CAAC,MAAM,EAAE,aAAa,GAAG,CAAC,EAAE,GAAG,OAAO,CAAC,CAAC,CAAC;AACvG,CAAC;AAED,gEAAgE;AAChE,MAAM,UAAU,kCAAkC,CAAC,aAAqB;IACtE,MAAM,IAAI,GAAG,oBAAoB,CAAC,GAAG,CAAC,aAAa,CAAC,CAAC;IACrD,IAAI,IAAI,KAAK,SAAS,EAAE,CAAC;QACvB,MAAM,IAAI,wBAAwB,CAAC,iEAAiE,CAAC,CAAC;IACxG,CAAC;IACD,OAAO,IAAI,UAAU,CAAC,CAAC,GAAG,cAAc,CAAC,WAAW,EAAE,IAAI,CAAC,CAAC,CAAC;AAC/D,CAAC;AAED,8DAA8D;AAC9D,MAAM,UAAU,4BAA4B;IAC1C,OAAO,IAAI,UAAU,CAAC,cAAc,CAAC,IAAI,CAAC,CAAC;AAC7C,CAAC;AAED,iEAAiE;AACjE,MAAM,UAAU,8BAA8B;IAC5C,OAAO,IAAI,UAAU,CAAC,cAAc,CAAC,QAAQ,CAAC,CAAC;AACjD,CAAC;AASD;;;;;;;GAOG;AACH,MAAM,UAAU,+BAA+B,CAAC,OAAmB;IACjE,IAAI,OAAO,CAAC,MAAM,GAAG,+BAA+B,EAAE,CAAC;QACrD,MAAM,IAAI,wBAAwB,CAAC,kEAAkE,CAAC,CAAC;IACzG,CAAC;IACD,MAAM,KAAK,GAAqB,CAAC,OAAO,CAAC,CAAC,CAAE,EAAE,OAAO,CAAC,CAAC,CAAE,CAAC,CAAC;IAC3D,OAAO,EAAE,KAAK,EAAE,OAAO,EAAE,GAAG,KAAK,CAAC,CAAC,CAAC,IAAI,KAAK,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC;AACvD,CAAC"}