@openmouse/protocol 0.1.0

package/dist/drivers/logitech/onboard-profiles.d.ts

@@ -0,0 +1,298 @@
+/**
+ * HID++ 0x8100 onboard profile decoding.
+ *
+ * Layouts recovered from Logitech's own registration code and verified against
+ * a Pro X Superlight 2 (profile format 7) — see
+ * docs/logitech-onboard-profiles.md. Pure functions only: the transport lives
+ * in hidpp.ts, so everything here is testable against captured bytes.
+ */
+/** 0x8100 function ids. Write functions are deliberately absent. */
+export declare const PROFILE_FN: {
+    readonly getInfo: 0;
+    readonly setMode: 16;
+    readonly getMode: 32;
+    readonly setCurrentProfile: 48;
+    readonly getCurrentProfile: 64;
+    readonly memoryRead: 80;
+    readonly memoryAddrWrite: 96;
+    readonly memoryWrite: 112;
+    readonly memoryWriteEnd: 128;
+};
+export declare const ONBOARD_MODE: {
+    readonly onboard: 1;
+    readonly host: 2;
+};
+/** Whether profile-content writes for `profileFormatId` are trusted at all. */
+export declare function isProfileWritable(profileFormatId: number | null | undefined): boolean;
+/** Whether the per-stage lift-off byte is trusted to write on this specific device. */
+export declare function isLodWritableForProduct(profileFormatId: number | null | undefined, productId: number | null | undefined): boolean;
+/** Whether this format has a reversible guided write probe. */
+export declare function supportsProfileWriteProbe(profileFormatId: number | null | undefined): boolean;
+/** Whether a complete, byte-for-byte reset image exists for this format. */
+export declare function supportsFactoryReset(profileFormatId: number | null | undefined): boolean;
+export interface ProfileFormat {
+    id: number;
+    name: string;
+    /** Which base layout applies; decides how a profile sector is decoded. */
+    base: "v1" | "v6";
+    /** A layout exists for this format. */
+    supported: boolean;
+    /** The layout has been confirmed against real hardware. */
+    verified: boolean;
+    /** Profile-content writes have been applied and restored on hardware. */
+    writable: boolean;
+}
+export declare function describeProfileFormat(profileFormatId: number): ProfileFormat;
+export type LiftOffLevel = "Low" | "Medium" | "High";
+/**
+ * Setting limits that vary by profile format rather than by model, keyed on the
+ * format the mouse reports through 0x8100 getInfo. A new mouse on a known
+ * format inherits them without a model check.
+ */
+/**
+ * DPI slot limits for one format. Slot count and DPI range are properties of
+ * the mouse, not of the app: an older format can hold fewer slots and a much
+ * narrower range. Null means we have not established them for that format, in
+ * which case slots are not offered at all rather than guessed at.
+ */
+export interface DpiStageCapabilities {
+    maxStages: number;
+    minDpi: number;
+    maxDpi: number;
+    stepDpi: number;
+}
+/**
+ * Report-rate ceilings, which differ per connection: the radio and the USB
+ * interface are not equally fast. Null when never established for a format.
+ */
+export interface ReportRateCapabilities {
+    wirelessMaxHz: number;
+    wiredMaxHz: number;
+}
+export interface ProfileFormatCapabilities {
+    supportedLods: LiftOffLevel[];
+    /**
+     * Byte feature 0x2202 uses for each level. The same on every device — it is
+     * the feature's enum, not the format's — but kept here so a format that ever
+     * turns out to differ has somewhere to say so.
+     */
+    lodEncoding: Record<LiftOffLevel, number>;
+    dpiStages: DpiStageCapabilities | null;
+    reportRates: ReportRateCapabilities | null;
+    /** Characters the name region holds, or null when the format has no name. */
+    maxNameLength: number | null;
+    /**
+     * Whether the format has a bunny-hop byte at all. Kept separate from the
+     * stored value: an unwritten byte reads 0xff and decodes to null, which
+     * means "never set", not "not supported".
+     */
+    bunnyHop: boolean;
+}
+export declare const PROFILE_NAME_MAX_CHARS: number;
+/** Narrows format storage limits to the DPI grid advertised by this sensor. */
+export declare function dpiStageCapabilitiesForOptions(formatCapabilities: DpiStageCapabilities | null, dpiOptions: readonly number[]): DpiStageCapabilities | null;
+export declare function capabilitiesForFormat(profileFormatId: number | null | undefined): ProfileFormatCapabilities;
+/** Turns a raw 0x2202 lift-off byte back into a level for the given format. */
+export declare function decodeLiftOffLevel(raw: number | null | undefined, capabilities: ProfileFormatCapabilities): LiftOffLevel | null;
+export interface OnboardProfilesInfo {
+    memoryModelId: number;
+    profileFormatId: number;
+    macroFormatId: number;
+    profileCount: number;
+    buttonCount: number;
+    sectorCount: number;
+    sectorSize: number;
+}
+export interface DirectoryEntry {
+    sector: number;
+    enabled: boolean;
+}
+export interface DpiStage {
+    x: number;
+    y: number;
+    /** 0 marks an unused stage; real levels are 1-3 (low/medium/high). */
+    lod: number;
+}
+export interface OnboardProfile {
+    sector: number;
+    enabled: boolean;
+    isCurrent: boolean;
+    name: string | null;
+    dpiStages: DpiStage[];
+    defaultDpiIndex: number | null;
+    reportRateWireless: number | null;
+    reportRateWired: number | null;
+    angleSnapping: boolean | null;
+    powerSaveTimeoutSeconds: number | null;
+    powerOffTimeoutSeconds: number | null;
+    /**
+     * Bunny-hop timeout in milliseconds, or 0 when the feature is off. Stored as
+     * ms / 10, so G HUB's 100-1000 ms range is 0x0a-0x64 and "off" is 0x00. All
+     * three confirmed on hardware; 0xff is unwritten flash and decodes as null.
+     */
+    bunnyHoppingMs: number | null;
+    buttonAssignments: OnboardButtonAssignment[];
+    gShiftAssignments: OnboardButtonAssignment[];
+    crcValid: boolean;
+    /** Raw sector, kept so captures can diff before/after a vendor-app change. */
+    raw: Uint8Array;
+}
+export type LogitechButtonAction = "Disabled" | "Left click" | "Right click" | "Middle click" | "Back" | "Forward" | "Tilt left" | "Tilt right" | "Next DPI" | "Previous DPI" | "Cycle DPI" | "Default DPI" | "DPI Shift" | "Next profile" | "Previous profile" | "Cycle profiles" | "G-Shift" | "Battery indicator";
+export interface OnboardButtonAssignment {
+    button: number;
+    action: LogitechButtonAction | "Custom";
+    raw: readonly number[];
+}
+export type LogitechButtonBinding = {
+    kind: "action";
+    action: LogitechButtonAction;
+} | {
+    kind: "keyboard";
+    key: number;
+    modifiers: number;
+} | {
+    kind: "consumer";
+    usage: number;
+};
+export interface LogitechMacroStep {
+    key: number;
+    modifiers: number;
+    /** Pause before this chord, in milliseconds. */
+    delayMs: number;
+}
+/** Encodes the HID++ macro format used by G502 onboard-memory sectors. */
+export declare function encodeMacroSector(sectorSize: number, steps: readonly LogitechMacroStep[]): Uint8Array;
+export declare function encodeMacroButtonAssignment(profile: Uint8Array, profileFormatId: number, layer: "primary" | "g-shift", button: number, macroSector: number): Uint8Array;
+export declare const LOGITECH_BUTTON_ACTIONS: readonly LogitechButtonAction[];
+export declare function encodeButtonAssignment(sector: Uint8Array, profileFormatId: number, layer: "primary" | "g-shift", button: number, binding: LogitechButtonAction | LogitechButtonBinding): Uint8Array;
+/**
+ * Field offsets per profile format. Formats 1-5 use the v1 base, 6-8 the v6
+ * base; only the fields the UI reads are listed here.
+ */
+interface ProfileLayout {
+    reportRateWireless: number | null;
+    reportRateWired: number | null;
+    /** Start of the DPI block: two index bytes, then five 5-byte stages. */
+    dpi: number | null;
+    angleSnapping: number;
+    powerSaveTimeout: number | null;
+    powerOffTimeout: number | null;
+    profileName: number;
+    /** Only formats 7+ register this component. */
+    bunnyHopping: number | null;
+}
+export declare function layoutForFormat(profileFormatId: number): ProfileLayout;
+export interface ComponentSpec {
+    offset: number;
+    size: number;
+    name: string;
+}
+export declare function componentsForFormat(profileFormatId: number): ComponentSpec[];
+/**
+ * Names the field a byte belongs to, so a diff reads as "dpi_v6 +2" rather
+ * than a bare offset. Returns null for bytes no component claims.
+ */
+export declare function describeOffset(profileFormatId: number, offset: number, sectorSize?: number): string | null;
+export declare function parseProfilesInfo(reply: Uint8Array): OnboardProfilesInfo;
+/** Directory entries are 4 bytes: sector (big-endian), enabled, reserved. */
+export declare function parseDirectory(bytes: Uint8Array): DirectoryEntry[];
+/** CRC-16/CCITT-FALSE over everything but the trailing two checksum bytes. */
+export declare function profileCrc(bytes: Uint8Array): number;
+export declare function storedCrc(bytes: Uint8Array): number;
+/** Writes the checksum into the last two bytes, big-endian. */
+export declare function applyCrc(bytes: Uint8Array): Uint8Array;
+/** Returns a fresh, CRC-valid factory sector only for a captured geometry. */
+export declare function factoryProfileForFormat(profileFormatId: number, sectorSize: number): Uint8Array | null;
+/**
+ * Returns a copy of the directory sector with one profile's enabled flag
+ * changed and the checksum recomputed. Every other byte is carried through
+ * untouched, so unknown directory fields survive.
+ */
+export declare function setDirectoryEnabled(sector: Uint8Array, profileSector: number, enabled: boolean): Uint8Array;
+/** Rates the byte can index, filtered to the ceiling for that connection. */
+export declare function reportRatesFor(capabilities: ReportRateCapabilities | null, link: "wireless" | "wired"): number[];
+/**
+ * Intersects format storage support with the rates advertised by the active
+ * hardware link. Legacy formats share one interval byte, so their live list
+ * applies to the whole profile; v6 formats retain the captured limit for the
+ * inactive link because the mouse cannot advertise that link while disconnected.
+ */
+export declare function reportRatesForDevice(capabilities: ReportRateCapabilities | null, link: "wireless" | "wired", liveRates: readonly number[], activeLink: "wireless" | "wired", sharedInterval: boolean): number[];
+export declare function validateReportRate(hz: number, capabilities: ReportRateCapabilities | null, link: "wireless" | "wired"): string | null;
+/**
+ * Returns a copy of the sector with one connection's report rate replaced and
+ * the checksum reapplied. The two links are stored separately, so setting one
+ * leaves the other alone.
+ */
+export declare function encodeReportRate(sector: Uint8Array, profileFormatId: number, link: "wireless" | "wired", hz: number, capabilitiesOverride?: ReportRateCapabilities | null): Uint8Array;
+/** Returns why a profile name cannot be stored, or null when it fits. */
+export declare function validateProfileName(name: string, maxLength: number | null): string | null;
+/**
+ * Returns a copy of the sector with the profile name replaced and the checksum
+ * reapplied. The region is zero-filled first so a shorter name cannot leave the
+ * tail of the previous one behind it.
+ */
+export declare function encodeProfileName(sector: Uint8Array, profileFormatId: number, name: string, maxLengthOverride?: number | null): Uint8Array;
+export declare const BUNNY_HOP_LIMITS: {
+    readonly minMs: 100;
+    readonly maxMs: 1000;
+    readonly stepMs: 10;
+};
+/**
+ * Returns why a bunny-hop time is invalid, or null when it is acceptable.
+ * The byte stores ms / 10, so anything off-step cannot be represented.
+ */
+export declare function validateBunnyHoppingMs(milliseconds: number): string | null;
+export interface DpiStagePlan {
+    /** One entry per slot the user wants, within the format's limit. */
+    stages: DpiStage[];
+    /** Which slot the mouse starts on, as an index into `stages`. */
+    defaultIndex: number;
+}
+/**
+ * Returns why a stage plan cannot be written to this format, or null when it
+ * is writable. Every limit comes from the format, so an older mouse holding
+ * fewer slots or a narrower DPI range is checked against its own numbers.
+ */
+export declare function validateDpiStagePlan(plan: DpiStagePlan, capabilities: DpiStageCapabilities | null, legacyScalar?: boolean): string | null;
+/**
+ * Levels as stored inside a stage record, where 0 means the stage is unused.
+ * This is a property of the record itself, so it does not vary with whatever
+ * encoding feature 0x2202 happens to use on a given format.
+ */
+export declare const PROFILE_STAGE_LOD: Record<LiftOffLevel, number>;
+export declare function stageLodLevel(lod: number): LiftOffLevel | null;
+/** Snaps a typed DPI onto the step and into the range the format allows. */
+export declare function clampDpi(value: number, capabilities: DpiStageCapabilities): number;
+/**
+ * Returns a copy of the sector with the DPI stage table replaced and the
+ * checksum reapplied. Slots past the plan are zeroed, which is how the vendor
+ * marks a stage unused, so the slot count is simply how many stages are set.
+ */
+export declare function encodeDpiStages(sector: Uint8Array, profileFormatId: number, plan: DpiStagePlan, capabilitiesOverride?: DpiStageCapabilities | null, 
+/**
+ * False on hardware where the per-stage lift-off byte is unverified (see
+ * isLodWritableForProduct): the stage's x/y still get the plan's values,
+ * but its lift-off byte is left exactly as read rather than overwritten,
+ * since this format may not have lift-off storage there at all.
+ */
+writeLod?: boolean): Uint8Array;
+/**
+ * Snaps a typed bunny-hop time into the range and step the byte can hold.
+ * A number field only enforces min/max/step for its spinner, so a typed value
+ * has to be corrected here instead of being rejected.
+ */
+export declare function clampBunnyHopMs(milliseconds: number): number;
+/**
+ * Rebuilds `before` with every field we can encode set to the value found in
+ * `after`, then fixes the checksum.
+ *
+ * This is how a write path is proven without writing: if the result is
+ * byte-identical to what the vendor software actually produced, our encoding,
+ * offsets and CRC are all correct. Any byte that differs is something we either
+ * model wrongly or cannot write yet.
+ */
+export declare function reproduceProfile(before: Uint8Array, after: Uint8Array, profileFormatId: number): Uint8Array;
+export declare function decodeOnboardProfile(bytes: Uint8Array, profileFormatId: number, entry: DirectoryEntry, isCurrent: boolean): OnboardProfile;
+export {};
+//# sourceMappingURL=onboard-profiles.d.ts.map

package/dist/drivers/logitech/onboard-profiles.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"onboard-profiles.d.ts","sourceRoot":"","sources":["../../../src/drivers/logitech/onboard-profiles.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAEH,oEAAoE;AACpE,eAAO,MAAM,UAAU;;;;;;;;;;CAUb,CAAC;AAEX,eAAO,MAAM,YAAY;;;CAAyC,CAAC;AAsCnE,+EAA+E;AAC/E,wBAAgB,iBAAiB,CAAC,eAAe,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,GAAG,OAAO,CAErF;AAiBD,uFAAuF;AACvF,wBAAgB,uBAAuB,CACrC,eAAe,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,EAC1C,SAAS,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,GACnC,OAAO,CAIT;AAED,+DAA+D;AAC/D,wBAAgB,yBAAyB,CAAC,eAAe,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,GAAG,OAAO,CAI7F;AAED,4EAA4E;AAC5E,wBAAgB,oBAAoB,CAAC,eAAe,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,GAAG,OAAO,CAIxF;AAED,MAAM,WAAW,aAAa;IAC5B,EAAE,EAAE,MAAM,CAAC;IACX,IAAI,EAAE,MAAM,CAAC;IACb,0EAA0E;IAC1E,IAAI,EAAE,IAAI,GAAG,IAAI,CAAC;IAClB,uCAAuC;IACvC,SAAS,EAAE,OAAO,CAAC;IACnB,2DAA2D;IAC3D,QAAQ,EAAE,OAAO,CAAC;IAClB,yEAAyE;IACzE,QAAQ,EAAE,OAAO,CAAC;CACnB;AAED,wBAAgB,qBAAqB,CAAC,eAAe,EAAE,MAAM,GAAG,aAAa,CAS5E;AAED,MAAM,MAAM,YAAY,GAAG,KAAK,GAAG,QAAQ,GAAG,MAAM,CAAC;AAErD;;;;GAIG;AACH;;;;;GAKG;AACH,MAAM,WAAW,oBAAoB;IACnC,SAAS,EAAE,MAAM,CAAC;IAClB,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;;GAGG;AACH,MAAM,WAAW,sBAAsB;IACrC,aAAa,EAAE,MAAM,CAAC;IACtB,UAAU,EAAE,MAAM,CAAC;CACpB;AAED,MAAM,WAAW,yBAAyB;IACxC,aAAa,EAAE,YAAY,EAAE,CAAC;IAC9B;;;;OAIG;IACH,WAAW,EAAE,MAAM,CAAC,YAAY,EAAE,MAAM,CAAC,CAAC;IAC1C,SAAS,EAAE,oBAAoB,GAAG,IAAI,CAAC;IACvC,WAAW,EAAE,sBAAsB,GAAG,IAAI,CAAC;IAC3C,6EAA6E;IAC7E,aAAa,EAAE,MAAM,GAAG,IAAI,CAAC;IAC7B;;;;OAIG;IACH,QAAQ,EAAE,OAAO,CAAC;CACnB;AAKD,eAAO,MAAM,sBAAsB,QAA6B,CAAC;AAsHjE,+EAA+E;AAC/E,wBAAgB,8BAA8B,CAC5C,kBAAkB,EAAE,oBAAoB,GAAG,IAAI,EAC/C,UAAU,EAAE,SAAS,MAAM,EAAE,GAC5B,oBAAoB,GAAG,IAAI,CAa7B;AAED,wBAAgB,qBAAqB,CAAC,eAAe,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,GAAG,yBAAyB,CAG3G;AAED,+EAA+E;AAC/E,wBAAgB,kBAAkB,CAChC,GAAG,EAAE,MAAM,GAAG,IAAI,GAAG,SAAS,EAC9B,YAAY,EAAE,yBAAyB,GACtC,YAAY,GAAG,IAAI,CAQrB;AAED,MAAM,WAAW,mBAAmB;IAClC,aAAa,EAAE,MAAM,CAAC;IACtB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,WAAW,EAAE,MAAM,CAAC;IACpB,UAAU,EAAE,MAAM,CAAC;CACpB;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,OAAO,CAAC;CAClB;AAED,MAAM,WAAW,QAAQ;IACvB,CAAC,EAAE,MAAM,CAAC;IACV,CAAC,EAAE,MAAM,CAAC;IACV,sEAAsE;IACtE,GAAG,EAAE,MAAM,CAAC;CACb;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,OAAO,CAAC;IACjB,SAAS,EAAE,OAAO,CAAC;IACnB,IAAI,EAAE,MAAM,GAAG,IAAI,CAAC;IACpB,SAAS,EAAE,QAAQ,EAAE,CAAC;IACtB,eAAe,EAAE,MAAM,GAAG,IAAI,CAAC;IAC/B,kBAAkB,EAAE,MAAM,GAAG,IAAI,CAAC;IAClC,eAAe,EAAE,MAAM,GAAG,IAAI,CAAC;IAC/B,aAAa,EAAE,OAAO,GAAG,IAAI,CAAC;IAC9B,uBAAuB,EAAE,MAAM,GAAG,IAAI,CAAC;IACvC,sBAAsB,EAAE,MAAM,GAAG,IAAI,CAAC;IACtC;;;;OAIG;IACH,cAAc,EAAE,MAAM,GAAG,IAAI,CAAC;IAC9B,iBAAiB,EAAE,uBAAuB,EAAE,CAAC;IAC7C,iBAAiB,EAAE,uBAAuB,EAAE,CAAC;IAC7C,QAAQ,EAAE,OAAO,CAAC;IAClB,8EAA8E;IAC9E,GAAG,EAAE,UAAU,CAAC;CACjB;AAED,MAAM,MAAM,oBAAoB,GAC5B,UAAU,GAAG,YAAY,GAAG,aAAa,GAAG,cAAc,GAAG,MAAM,GAAG,SAAS,GAC/E,WAAW,GAAG,YAAY,GAAG,UAAU,GAAG,cAAc,GAAG,WAAW,GACtE,aAAa,GAAG,WAAW,GAAG,cAAc,GAAG,kBAAkB,GACjE,gBAAgB,GAAG,SAAS,GAAG,mBAAmB,CAAC;AAEvD,MAAM,WAAW,uBAAuB;IACtC,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,oBAAoB,GAAG,QAAQ,CAAC;IACxC,GAAG,EAAE,SAAS,MAAM,EAAE,CAAC;CACxB;AAED,MAAM,MAAM,qBAAqB,GAC7B;IAAE,IAAI,EAAE,QAAQ,CAAC;IAAC,MAAM,EAAE,oBAAoB,CAAA;CAAE,GAChD;IAAE,IAAI,EAAE,UAAU,CAAC;IAAC,GAAG,EAAE,MAAM,CAAC;IAAC,SAAS,EAAE,MAAM,CAAA;CAAE,GACpD;IAAE,IAAI,EAAE,UAAU,CAAC;IAAC,KAAK,EAAE,MAAM,CAAA;CAAE,CAAC;AAExC,MAAM,WAAW,iBAAiB;IAChC,GAAG,EAAE,MAAM,CAAC;IACZ,SAAS,EAAE,MAAM,CAAC;IAClB,gDAAgD;IAChD,OAAO,EAAE,MAAM,CAAC;CACjB;AAED,0EAA0E;AAC1E,wBAAgB,iBAAiB,CAAC,UAAU,EAAE,MAAM,EAAE,KAAK,EAAE,SAAS,iBAAiB,EAAE,GAAG,UAAU,CAuBrG;AAED,wBAAgB,2BAA2B,CACzC,OAAO,EAAE,UAAU,EACnB,eAAe,EAAE,MAAM,EACvB,KAAK,EAAE,SAAS,GAAG,SAAS,EAC5B,MAAM,EAAE,MAAM,EACd,WAAW,EAAE,MAAM,GAClB,UAAU,CAYZ;AAED,eAAO,MAAM,uBAAuB,EAAE,SAAS,oBAAoB,EAIlE,CAAC;AAmCF,wBAAgB,sBAAsB,CACpC,MAAM,EAAE,UAAU,EAClB,eAAe,EAAE,MAAM,EACvB,KAAK,EAAE,SAAS,GAAG,SAAS,EAC5B,MAAM,EAAE,MAAM,EACd,OAAO,EAAE,oBAAoB,GAAG,qBAAqB,GACpD,UAAU,CAiBZ;AAKD;;;GAGG;AACH,UAAU,aAAa;IACrB,kBAAkB,EAAE,MAAM,GAAG,IAAI,CAAC;IAClC,eAAe,EAAE,MAAM,GAAG,IAAI,CAAC;IAC/B,wEAAwE;IACxE,GAAG,EAAE,MAAM,GAAG,IAAI,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,gBAAgB,EAAE,MAAM,GAAG,IAAI,CAAC;IAChC,eAAe,EAAE,MAAM,GAAG,IAAI,CAAC;IAC/B,WAAW,EAAE,MAAM,CAAC;IACpB,+CAA+C;IAC/C,YAAY,EAAE,MAAM,GAAG,IAAI,CAAC;CAC7B;AAyBD,wBAAgB,eAAe,CAAC,eAAe,EAAE,MAAM,GAAG,aAAa,CAGtE;AAED,MAAM,WAAW,aAAa;IAC5B,MAAM,EAAE,MAAM,CAAC;IACf,IAAI,EAAE,MAAM,CAAC;IACb,IAAI,EAAE,MAAM,CAAC;CACd;AAsCD,wBAAgB,mBAAmB,CAAC,eAAe,EAAE,MAAM,GAAG,aAAa,EAAE,CAK5E;AAED;;;GAGG;AACH,wBAAgB,cAAc,CAAC,eAAe,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,UAAU,SAAM,GAAG,MAAM,GAAG,IAAI,CAKvG;AAED,wBAAgB,iBAAiB,CAAC,KAAK,EAAE,UAAU,GAAG,mBAAmB,CAUxE;AAED,6EAA6E;AAC7E,wBAAgB,cAAc,CAAC,KAAK,EAAE,UAAU,GAAG,cAAc,EAAE,CAQlE;AAED,8EAA8E;AAC9E,wBAAgB,UAAU,CAAC,KAAK,EAAE,UAAU,GAAG,MAAM,CASpD;AAED,wBAAgB,SAAS,CAAC,KAAK,EAAE,UAAU,GAAG,MAAM,CAEnD;AAED,+DAA+D;AAC/D,wBAAgB,QAAQ,CAAC,KAAK,EAAE,UAAU,GAAG,UAAU,CAKtD;AA4BD,8EAA8E;AAC9E,wBAAgB,uBAAuB,CAAC,eAAe,EAAE,MAAM,EAAE,UAAU,EAAE,MAAM,GAAG,UAAU,GAAG,IAAI,CAMtG;AAED;;;;GAIG;AACH,wBAAgB,mBAAmB,CAAC,MAAM,EAAE,UAAU,EAAE,aAAa,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,GAAG,UAAU,CAW3G;AA+DD,6EAA6E;AAC7E,wBAAgB,cAAc,CAC5B,YAAY,EAAE,sBAAsB,GAAG,IAAI,EAC3C,IAAI,EAAE,UAAU,GAAG,OAAO,GACzB,MAAM,EAAE,CAIV;AAED;;;;;GAKG;AACH,wBAAgB,oBAAoB,CAClC,YAAY,EAAE,sBAAsB,GAAG,IAAI,EAC3C,IAAI,EAAE,UAAU,GAAG,OAAO,EAC1B,SAAS,EAAE,SAAS,MAAM,EAAE,EAC5B,UAAU,EAAE,UAAU,GAAG,OAAO,EAChC,cAAc,EAAE,OAAO,GACtB,MAAM,EAAE,CAIV;AAED,wBAAgB,kBAAkB,CAChC,EAAE,EAAE,MAAM,EACV,YAAY,EAAE,sBAAsB,GAAG,IAAI,EAC3C,IAAI,EAAE,UAAU,GAAG,OAAO,GACzB,MAAM,GAAG,IAAI,CAOf;AAED;;;;GAIG;AACH,wBAAgB,gBAAgB,CAC9B,MAAM,EAAE,UAAU,EAClB,eAAe,EAAE,MAAM,EACvB,IAAI,EAAE,UAAU,GAAG,OAAO,EAC1B,EAAE,EAAE,MAAM,EACV,oBAAoB,CAAC,EAAE,sBAAsB,GAAG,IAAI,GACnD,UAAU,CAkBZ;AAED,yEAAyE;AACzE,wBAAgB,mBAAmB,CAAC,IAAI,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,GAAG,IAAI,GAAG,MAAM,GAAG,IAAI,CAWzF;AAED;;;;GAIG;AACH,wBAAgB,iBAAiB,CAC/B,MAAM,EAAE,UAAU,EAClB,eAAe,EAAE,MAAM,EACvB,IAAI,EAAE,MAAM,EACZ,iBAAiB,CAAC,EAAE,MAAM,GAAG,IAAI,GAChC,UAAU,CAiBZ;AAED,eAAO,MAAM,gBAAgB;;;;CAAmD,CAAC;AAEjF;;;GAGG;AACH,wBAAgB,sBAAsB,CAAC,YAAY,EAAE,MAAM,GAAG,MAAM,GAAG,IAAI,CAY1E;AAMD,MAAM,WAAW,YAAY;IAC3B,oEAAoE;IACpE,MAAM,EAAE,QAAQ,EAAE,CAAC;IACnB,iEAAiE;IACjE,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;;;GAIG;AACH,wBAAgB,oBAAoB,CAClC,IAAI,EAAE,YAAY,EAClB,YAAY,EAAE,oBAAoB,GAAG,IAAI,EACzC,YAAY,UAAQ,GACnB,MAAM,GAAG,IAAI,CA6Bf;AAED;;;;GAIG;AACH,eAAO,MAAM,iBAAiB,EAAE,MAAM,CAAC,YAAY,EAAE,MAAM,CAAkC,CAAC;AAE9F,wBAAgB,aAAa,CAAC,GAAG,EAAE,MAAM,GAAG,YAAY,GAAG,IAAI,CAG9D;AAED,4EAA4E;AAC5E,wBAAgB,QAAQ,CAAC,KAAK,EAAE,MAAM,EAAE,YAAY,EAAE,oBAAoB,GAAG,MAAM,CAKlF;AAED;;;;GAIG;AACH,wBAAgB,eAAe,CAC7B,MAAM,EAAE,UAAU,EAClB,eAAe,EAAE,MAAM,EACvB,IAAI,EAAE,YAAY,EAClB,oBAAoB,CAAC,EAAE,oBAAoB,GAAG,IAAI;AAClD;;;;;GAKG;AACH,QAAQ,UAAO,GACd,UAAU,CAsCZ;AAED;;;;GAIG;AACH,wBAAgB,eAAe,CAAC,YAAY,EAAE,MAAM,GAAG,MAAM,CAK5D;AAcD;;;;;;;;GAQG;AACH,wBAAgB,gBAAgB,CAAC,MAAM,EAAE,UAAU,EAAE,KAAK,EAAE,UAAU,EAAE,eAAe,EAAE,MAAM,GAAG,UAAU,CAgF3G;AAED,wBAAgB,oBAAoB,CAClC,KAAK,EAAE,UAAU,EACjB,eAAe,EAAE,MAAM,EACvB,KAAK,EAAE,cAAc,EACrB,SAAS,EAAE,OAAO,GACjB,cAAc,CAyChB"}