@metamesh/modeling 0.18.0 → 0.20.0

package/dist/docs/reference/model/rectangle.md

@@ -8,10 +8,14 @@ Filled rectangular section with uniform or independently treated corners.
 
 ## Example: Round the corners
 
+
+
 ```ts
-rectangle({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
+rectangle({ size: [30, 20], treatment: { kind: "round", radius: 3 } }).extrude({ height: 3 });
 ```
 
+
+
 Use [rectangleContour](../geometry/rectangleContour.md) for sampled boundary coordinates,
 or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft landmarks.
 
@@ -21,26 +25,26 @@ or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft
 
 **`options`** · [`RectangleOptions`](RectangleOptions.md) · Required
 
-- [`size`](RectangleOptions.md#size) · `number` \| [`Vector2Input`](Vector2Input.md) · Required
+- [`size`](RectangleOptions.md#size) · `number` \| [`Vector2Input`](../geometry/Vector2Input.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
-- [`attachment`](RectangleOptions.md#attachment) · [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md) · Optional
-
-  Applied after local construction; Section attachment must preserve the XY plane.
-
 - [`center`](RectangleOptions.md#center) · `boolean` · Optional
 
   Center on XY; otherwise the minimum corner is the origin. Defaults to true.
 
-- [`treatment`](RectangleOptions.md#treatment) · [`EdgeTreatment`](EdgeTreatment.md) \| [`RectangleCornerTreatments`](RectangleCornerTreatments.md) · Optional
+- [`treatment`](RectangleOptions.md#treatment) · [`EdgeTreatment`](../geometry/EdgeTreatment.md) \| [`RectangleCornerTreatments`](../geometry/RectangleCornerTreatments.md) · Optional
 
   Uniform treatment or four corner treatments. Exact round segments describe a complete circle and must divide by four.
 
-- [`limits`](RectangleOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](RectangleOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit sampling ceiling for the complete output profile.
 
+- [`attachment`](RectangleOptions.md#attachment) · [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md) · Optional
+
+  Applied after local construction; Section attachment must preserve the XY plane.
+
 
 
 ## Returns
@@ -55,8 +59,14 @@ or [rectangleProfile](../geometry/rectangleProfile.md) to retain identified loft
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
+
+## Import
+
+```ts
+import { rectangle } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/regularPolygon.md

@@ -8,10 +8,14 @@ Regular polygon with a vertex on +X.
 
 ## Example: Hexagonal section
 
+
+
 ```ts
-regularPolygon({ radius: 10, sides: 6, sizing: "face" });
+regularPolygon({ radius: 10, sides: 6, sizing: "face" }).extrude({ height: 3 });
 ```
 
+
+
 ## Parameters
 
 <a id="options"></a>
@@ -32,8 +36,14 @@ regularPolygon({ radius: 10, sides: 6, sizing: "face" });
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
+
+## Import
+
+```ts
+import { regularPolygon } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/revolve.md

@@ -2,26 +2,32 @@
 
 Revolves a filled Section or explicit corresponding radial/Z contours around +Z, with caps for partial sweeps. Use `section.revolve(options)` in fluent sequences, or this function for generic profile inputs.
 
-**revolve**(`shape`: [`Section`](Section.md) \| [`CorrespondingProfile`](CorrespondingProfile.md), `options?`: [`RevolveOptions`](RevolveOptions.md)): [`Solid`](Solid.md)
+**revolve**(`shape`: [`Section`](Section.md) \| [`CorrespondingProfile`](../geometry/CorrespondingProfile.md), `options?`: [`RevolveOptions`](RevolveOptions.md)): [`Solid`](Solid.md)
 
 
 
 ## Example: Revolve
 
+
+
 ```ts
-import { matchProfiles, revolve } from "@metamesh/modeling";
-import { rectangleProfile } from "@metamesh/modeling/geometry";
+import { revolve } from "@metamesh/modeling";
+import { matchProfiles, rectangleProfile } from "@metamesh/modeling/geometry";
 
 // Contour coordinates are [radius, Z].
 const [profile] = matchProfiles([rectangleProfile({ size: [4, 16], center: false })]);
 revolve(profile!, { degrees: 270 });
 ```
 
+
+
 ## Parameters
 
 <a id="shape"></a>
 
-**`shape`** · [`Section`](Section.md) \| [`CorrespondingProfile`](CorrespondingProfile.md) · Required
+**`shape`** · [`Section`](Section.md) \| [`CorrespondingProfile`](../geometry/CorrespondingProfile.md) · Required
+
+Profile coordinates are [radius, Z] in millimetres.
 
 
 
@@ -33,10 +39,10 @@ revolve(profile!, { degrees: 270 });
 
   Exact circumferential segment count from three through the configured safety limit.
 
-  This local topology override takes precedence over [CircularPrimitiveOptions.resolution](CircularPrimitiveOptions.md#resolution)
+  This local topology override takes precedence over [CircularPrimitiveOptions.resolution](../geometry/CircularPrimitiveOptions.md#resolution)
   and any active model-wide resolution policy.
 
-- [`resolution`](RevolveOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](RevolveOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
@@ -48,7 +54,7 @@ revolve(profile!, { degrees: 270 });
   revolutions require at least three sweep intervals: adaptive sampling refines to that floor,
   while exact counts that imply fewer intervals reject. Pure mesh.revolve supports one interval.
 
-- [`limits`](RevolveOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
+- [`limits`](RevolveOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and sampling allocation ceilings.
 
@@ -61,16 +67,23 @@ revolve(profile!, { degrees: 270 });
 
 ## Related APIs
 
-- [CorrespondingProfile](CorrespondingProfile.md)
 - [RevolveOptions](RevolveOptions.md)
 - [Section](Section.md)
 - [Solid](Solid.md)
 
 ## Guides
 
-- [Revolve a radial profile](../../guides/recipes.md#revolve-a-radial-profile)
-- [Rotation-minimizing path sweep](../../guides/recipes.md#rotation-minimizing-path-sweep)
-- [Matched-section loft](../../guides/recipes.md#matched-section-loft)
-- [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Chamfer a twisted extrusion](../../guides/profiles-and-extrusion.md#chamfer-a-twisted-extrusion)
+- [Revolve a radial profile](../../guides/profiles-and-extrusion.md#revolve-a-radial-profile)
+- [Rotation-minimizing path sweep](../../guides/sweeps-and-lofts.md#rotation-minimizing-path-sweep)
+- [Matched-section loft](../../guides/sweeps-and-lofts.md#matched-section-loft)
+- [Choose a modeling path](../../guides/recipes.md#choose-a-technique)
+
+## Import
+
+```ts
+import { revolve } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/solidFromMesh.md

@@ -2,12 +2,14 @@
 
 Imports a bounded closed indexed mesh.
 
-**solidFromMesh**(`mesh`: [`TriangleMesh`](TriangleMesh.md) \| [`ImmutableTriangleMesh`](../geometry/ImmutableTriangleMesh.md)): [`Solid`](Solid.md)
+**solidFromMesh**(`mesh`: [`TriangleMesh`](../mesh/TriangleMesh.md) \| [`ImmutableTriangleMesh`](../mesh/ImmutableTriangleMesh.md)): [`Solid`](Solid.md)
 
 
 
 ## Example: Mesh import
 
+
+
 ```ts
 import { solidFromMesh } from "@metamesh/modeling";
 import * as mesh from "@metamesh/modeling/geometry/mesh";
@@ -17,11 +19,15 @@ const plate = mesh.extrude(rectangleContour({ size: [20, 12] }), { height: 6 });
 solidFromMesh(plate);
 ```
 
+
+
 ## Parameters
 
 <a id="mesh"></a>
 
-**`mesh`** · [`TriangleMesh`](TriangleMesh.md) \| [`ImmutableTriangleMesh`](../geometry/ImmutableTriangleMesh.md) · Required
+**`mesh`** · [`TriangleMesh`](../mesh/TriangleMesh.md) \| [`ImmutableTriangleMesh`](../mesh/ImmutableTriangleMesh.md) · Required
+
+Closed, oriented mesh in millimetres; ownership stays with the caller.
 
 
 
@@ -32,12 +38,16 @@ solidFromMesh(plate);
 
 ## Related APIs
 
-- [ImmutableTriangleMesh](ImmutableTriangleMesh.md)
 - [Solid](Solid.md)
-- [TriangleMesh](TriangleMesh.md)
 
 ## Guides
 
-- [Solid inspection](../../guides/recipes.md#solid-inspection)
+- [Solid inspection](../../guides/resolution-and-inspection.md#solid-inspection)
+
+## Import
+
+```ts
+import { solidFromMesh } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/sphere.md

@@ -1,6 +1,6 @@
 # sphere
 
-Origin-centered sphere.
+Origin-centered sphere with adaptive sampling that bounds spherical triangle error. Explicit segment requests select octahedral refinement and round up to a multiple of four.
 
 **sphere**(`options`: [`SphereOptions`](SphereOptions.md)): [`Solid`](Solid.md)
 
@@ -36,7 +36,15 @@ sphere({ diameter: 20 });
 
 ## Guides
 
-- [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
-- [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import { sphere } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/star.md

@@ -8,10 +8,14 @@ Alternating outer/inner star vertices.
 
 ## Example: Five-point section
 
+
+
 ```ts
-star({ outerRadius: 12, innerRadius: 6, points: 5 });
+star({ outerRadius: 12, innerRadius: 6, points: 5 }).extrude({ height: 3 });
 ```
 
+
+
 ## Parameters
 
 <a id="options"></a>
@@ -30,18 +34,18 @@ star({ outerRadius: 12, innerRadius: 6, points: 5 });
 
   Integer outer point count, at least three; output contains twice as many vertices.
 
-- [`attachment`](StarOptions.md#attachment) · [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md) · Optional
-
-  Applied after local construction; Section attachment must preserve the XY plane.
-
 - [`rotation`](StarOptions.md#rotation) · `number` · Optional
 
   Counterclockwise rotation in degrees; defaults to zero with an outer vertex on +X.
 
-- [`limits`](StarOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](StarOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit sampling ceilings, bounded by the host policy during modeling.
 
+- [`attachment`](StarOptions.md#attachment) · [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md) · Optional
+
+  Applied after local construction; Section attachment must preserve the XY plane.
+
 
 
 ## Returns
@@ -56,8 +60,14 @@ star({ outerRadius: 12, innerRadius: 6, points: 5 });
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
+
+## Import
+
+```ts
+import { star } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/stroke.md

@@ -1,56 +1,62 @@
 # stroke
 
-Creates a centered-width native Section along a sampled XY path.
+Declares a centered-width Section recipe along a sampled XY path.
 
-**stroke**(`path`: [`Path2Input`](Path2Input.md), `options`: [`StrokeOptions`](StrokeOptions.md)): [`Section`](Section.md)
+**stroke**(`path`: [`Path2Input`](../geometry/Path2Input.md), `options`: [`StrokeOptions`](../geometry/StrokeOptions.md)): [`Section`](Section.md)
 
 
 
 ## Example: Extrude a rounded track
 
+
+
 ```ts
 stroke([[0, 0], [20, 0], [20, 10]], { width: 3, join: "round", cap: "round" }).extrude({ height: 2 });
 ```
 
-Shares caps, joins and physical sampling with Geometry's strokeRegionData. Native union
-resolves overlapping stroke primitives. Session resolution and resource ceilings apply;
+
+
+Shares caps, joins and physical sampling with Geometry's strokeRegionData. During evaluation,
+union resolves overlapping stroke primitives. Session resolution and resource ceilings apply;
 closed paths omit the duplicated seam. Returns an immutable deferred recipe.
 
 ## Parameters
 
 <a id="path"></a>
 
-**`path`** · [`Path2Input`](Path2Input.md) · Required
+**`path`** · [`Path2Input`](../geometry/Path2Input.md) · Required
+
+XY path in millimetres.
 
 
 
 <a id="options"></a>
 
-**`options`** · [`StrokeOptions`](StrokeOptions.md) · Required
+**`options`** · [`StrokeOptions`](../geometry/StrokeOptions.md) · Required
 
-- [`width`](StrokeOptions.md#width) · `number` · Required
+- [`width`](../geometry/StrokeOptions.md#width) · `number` · Required
 
   Positive total stroke width in millimetres, centered on the sampled path.
 
-- [`limits`](StrokeOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](../geometry/StrokeOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Explicit path, circular and expanded-profile allocation ceilings.
 
-- [`closed`](StrokeOptions.md#closed) · `boolean` · Optional
+- [`closed`](../geometry/StrokeOptions.md#closed) · `boolean` · Optional
 
   Raw point closure defaults to false; a Path2 supplies its closure and rejects conflicts.
 
-- [`cap`](StrokeOptions.md#cap) · [`StrokeCap`](StrokeCap.md) · Optional
+- [`cap`](../geometry/StrokeOptions.md#cap) · [`StrokeCap`](../geometry/StrokeCap.md) · Optional
 
   End-cap treatment for an open path. Ignored for closed paths. Default: `butt`.
 
-- [`join`](StrokeOptions.md#join) · [`StrokeJoin`](StrokeJoin.md) · Optional
+- [`join`](../geometry/StrokeOptions.md#join) · [`StrokeJoin`](../geometry/StrokeJoin.md) · Optional
 
   Corner treatment; miters exceeding SVG's default limit of 4 become bevels. Default: `miter`.
 
-- [`resolution`](StrokeOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](../geometry/StrokeOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
-  Physical tessellation policy for round caps and joins.
+  Physical tessellation for round features; caps use tangent-aligned 180-degree arcs.
 
 
 
@@ -61,14 +67,18 @@ closed paths omit the duplicated seam. Returns an immutable deferred recipe.
 
 ## Related APIs
 
-- [Path2Input](Path2Input.md)
 - [Section](Section.md)
-- [StrokeOptions](StrokeOptions.md)
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
+
+## Import
+
+```ts
+import { stroke } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/svgPathSection.md

@@ -8,23 +8,29 @@ Imports bounded filled SVG path data.
 
 ## Example: Fill an SVG path in millimetres
 
+
+
 ```ts
-svgPathSection("M0 0H20V12H0Z", { origin: "center", scale: 1 });
+svgPathSection("M0 0H20V12H0Z", { origin: "center", scale: 1 }).extrude({ height: 3 });
 ```
 
+
+
 ## Parameters
 
 <a id="path"></a>
 
 **`path`** · `string` · Required
 
+SVG path data, at most 1 MiB of UTF-8; omit the XML wrapper.
+
 
 
 <a id="options"></a>
 
 **`options`** · [`SvgPathSectionOptions`](SvgPathSectionOptions.md) · Optional
 
-- [`limits`](SvgPathSectionOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](SvgPathSectionOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Local allocation ceilings may only lower the configured engine policy.
 
@@ -32,13 +38,13 @@ svgPathSection("M0 0H20V12H0Z", { origin: "center", scale: 1 });
 
   Nonzero or even-odd filled-contour rule; defaults to nonzero.
 
-- [`resolution`](SvgPathSectionOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](SvgPathSectionOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Local physical sampling policy; exact interval counts take precedence.
 
 - [`origin`](SvgPathSectionOptions.md#origin) · [`SvgOrigin`](SvgOrigin.md) · Optional
 
-  Center the painted bounds or preserve original path coordinates.
+  Center painted bounds (default), or preserve original path coordinates.
 
 - [`scale`](SvgPathSectionOptions.md#scale) · `number` · Optional
 
@@ -58,8 +64,14 @@ svgPathSection("M0 0H20V12H0Z", { origin: "center", scale: 1 });
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
+
+## Import
+
+```ts
+import { svgPathSection } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/svgSection.md

@@ -8,30 +8,36 @@ Imports bounded painted SVG document geometry.
 
 ## Example: Import a physical SVG rectangle
 
+
+
 ```ts
 svgSection(
   '<svg xmlns="http://www.w3.org/2000/svg" width="30mm" height="20mm" viewBox="0 0 30 20"><rect width="30" height="20"/></svg>',
   { origin: "center" },
-);
+).extrude({ height: 3 });
 ```
 
+
+
 ## Parameters
 
 <a id="svg"></a>
 
 **`svg`** · `string` · Required
 
+Complete SVG XML, at most 256 KiB of UTF-8.
+
 
 
 <a id="options"></a>
 
 **`options`** · [`SvgSectionOptions`](SvgSectionOptions.md) · Optional
 
-- [`fit`](SvgSectionOptions.md#fit) · [`Bounds2Input`](Bounds2Input.md) · Optional
+- [`fit`](SvgSectionOptions.md#fit) · [`Bounds2Input`](../geometry/Bounds2Input.md) · Optional
 
   Fit painted bounds uniformly inside positioned XY millimetre bounds; adaptive resolution applies at the fitted size.
 
-- [`limits`](SvgSectionOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
+- [`limits`](SvgSectionOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\> · Optional
 
   Local allocation ceilings may only lower the configured engine policy.
 
@@ -39,13 +45,13 @@ svgSection(
 
   Exact circular tessellation count overriding physical sampling.
 
-- [`resolution`](SvgSectionOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](SvgSectionOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Local physical sampling policy; exact interval counts take precedence.
 
 - [`origin`](SvgSectionOptions.md#origin) · [`SvgOrigin`](SvgOrigin.md) · Optional
 
-  Place the painted bounds around the origin or preserve document coordinates.
+  Center painted bounds (default), or preserve document coordinates.
 
 
 
@@ -61,8 +67,14 @@ svgSection(
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
+
+## Import
+
+```ts
+import { svgSection } from "@metamesh/modeling";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.