@metamesh/modeling 0.18.0 → 0.20.0

package/dist/docs/reference/model/categories/explicit-profiles.md

@@ -1,34 +0,0 @@
-# Explicit matching profiles
-
-Build hollow or multicomponent lofts and sweeps using stable landmarks.
-
-`Contour` is point data with an implicit closing edge. `Profile` specifies stable component, contour, and span IDs for a family; it is distinct from a filled `Section`.
-
-Call `matchProfiles` once over the complete family to produce `CorrespondingProfile` values. Paired spans share a physical sampling grid, including logical slots for collapsed corners. `loft` and `sweep` use that correspondence without guessing topology or rematching.
-
-## Functions
-
-| API | Summary |
-| --- | --- |
-| [matchProfiles](../matchProfiles.md) | Matches a profile family using operation settings over host resolution and limits. Requires active synchronous model execution. Use Geometry's matchProfiles for standalone preparation. |
-
-## Interfaces
-
-| API | Summary |
-| --- | --- |
-| [CorrespondingProfile](../CorrespondingProfile.md) | Shared logical contour sampling suitable for a loft or hollow sweep. |
-| [CorrespondingComponent](../CorrespondingComponent.md) | One sampled component retaining contour identities and logical point correspondence. |
-| [CorrespondingContour](../CorrespondingContour.md) | A sampled contour retaining logical slots, including intentionally collapsed spans. |
-| [MatchProfilesOptions](../MatchProfilesOptions.md) | Explicit family sampling settings; omitted values use physical package defaults. |
-| [Profile](../Profile.md) | An explicit component/contour/span topology, before shared family sampling with matchProfiles. Component, contour and span identities establish correspondence across a loft or sweep family. |
-| [ProfileComponent2](../ProfileComponent2.md) | One component and its explicitly identified holes. |
-| [ProfileContour2](../ProfileContour2.md) | An identified closed boundary of curve spans, before shared family sampling. Outer winding is CCW and hole winding is CW. matchProfiles retains span identities in sampled contours. |
-
-## Type aliases
-
-| API | Summary |
-| --- | --- |
-| [CorrespondingProfileStation](../CorrespondingProfileStation.md) | One already matched profile at an explicit height or right-handed spatial frame. |
-| [ProfileSpan2](../ProfileSpan2.md) | An identified line, circular arc, or cubic Bézier between corresponding landmarks. |
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/categories/paths.md

@@ -1,42 +0,0 @@
-# Sampled paths
-
-Reuse immutable sampled paths in 2D or 3D.
-
-Use `path2` and `path3` for immutable sampled paths. `transform()`, `reverse()`, and `resample()` return new values; Geometry accepts the path values directly.
-
-`closestPoint()` reports a boundary position and fraction within an edge, rather than a filled interior or analytic-curve solution. `bounds()` returns fluent bounds, or `undefined` for an empty path. `toData()` returns points with dimension and closure metadata.
-
-Closed paths omit the duplicated endpoint. `polygon` fills a closed planar path and establishes winding.
-
-## Functions
-
-| API | Summary |
-| --- | --- |
-| [path2](../path2.md) | Snapshots finite XY coordinates as an immutable sampled path, independent of engine initialization. |
-| [path3](../path3.md) | Snapshots finite XYZ coordinates as an immutable sampled path with the same closure, seam, allocation and error rules as path2. Analytic curves must be sampled explicitly first. |
-
-## Interfaces
-
-| API | Summary |
-| --- | --- |
-| [Path2](../Path2-type.md) | Immutable directed XY polyline. Closure is explicit and does not imply a filled Section. |
-| [Path3](../Path3-type.md) | Immutable directed XYZ polyline; it represents sampled edges, not an analytic curve. |
-| [PathOptions](../PathOptions.md) | Topology and allocation ceiling for an immutable sampled path. |
-| [PathLocation](../PathLocation.md) | Nearest location on a sampled boundary, rather than inside a filled shape or on an analytic curve. |
-| [PathResamplingOptions](../PathResamplingOptions.md) | Equal arc-length sampling; the path itself owns whether its closing edge is included. |
-| [Path2Data](../Path2Data.md) | Complete plain XY path representation, including topology and empty-path dimensional identity. |
-| [Path3Data](../Path3Data.md) | Complete plain XYZ path representation, including topology and empty-path dimensional identity. |
-| [CurveSamplingOptions](../CurveSamplingOptions.md) | Explicit physical sampling and allocation policy for reusable curves. |
-
-## Type aliases
-
-| API | Summary |
-| --- | --- |
-| [Path2Input](../Path2Input.md) | A matching path value, complete plain path data, or a collection of vectors. |
-| [Path3Input](../Path3Input.md) | A matching path value, complete plain path data, or a collection of vectors. |
-
-## Guides
-
-- [Path queries and closure-preserving interchange](../../../guides/concepts.md#query-paths-and-preserve-closure)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/categories/resolution.md

@@ -1,20 +0,0 @@
-# Local resolution
-
-Choose physical curve sampling and explicit native tolerance.
-
-Exact operation counts override the operation's resolution policy, which overrides host session defaults. Pass resolution to each affected constructor or `Section` operation.
-
-`Solid.withTolerance()` changes native geometric tolerance on an immutable copy; it does not select curve sampling.
-
-## Interfaces
-
-| API | Summary |
-| --- | --- |
-| [GeometryResolution](../GeometryResolution.md) | Tessellation policy for sampled geometry measured in millimetres. |
-| [GeometryToleranceOptions](../GeometryToleranceOptions.md) | Optional overrides for MetaMesh's geometry comparison policy. |
-
-## Guides
-
-- [Coordinates, units, and resolution](../../../guides/concepts.md#coordinates-units-and-resolution)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/immutableBuffer.md

@@ -1,49 +0,0 @@
-# immutableBuffer
-
-Copies numeric data once into private storage. This pure helper needs no active generation.
-
-**immutableBuffer**\<`T` *extends* [`NumericArray`](../geometry/NumericArray.md)\>(`source`: `T`): [`ImmutableBuffer`](../geometry/ImmutableBuffer-type.md)\<`T`\>
-
-
-
-## Example
-
-```ts
-import { immutableBuffer } from "@metamesh/modeling";
-const heights = immutableBuffer(new Float32Array([2, 4, 6]));
-const count = heights.length;
-const first = heights.at(0);
-const doubled = Array.from(heights, (height) => height * 2);
-const editable = heights.copy();
-editable[0] = 8; // heights still contains 2, 4, 6.
-```
-
-## Type Parameters
-
-### T
-
-`T` *extends* [`NumericArray`](../geometry/NumericArray.md)
-
-## Parameters
-
-<a id="source"></a>
-
-**`source`** · `T` · Required
-
-
-
-## Returns
-
-[`ImmutableBuffer`](../geometry/ImmutableBuffer-type.md)\<`T`\>
-
-
-## Related APIs
-
-- [ImmutableBuffer](ImmutableBuffer-type.md)
-- [NumericArray](NumericArray.md)
-
-## Guides
-
-- [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/isGeometryError.md

@@ -1,34 +0,0 @@
-# isGeometryError
-
-Recognizes structured geometry errors from separately bundled Modeling copies in the same realm.
-
-**isGeometryError**(`value`: `unknown`): `value is GeometryError`
-
-
-
-Ordinary errors and unmarked code-shaped objects are rejected. The marker is execution-local and
-does not survive structured cloning; worker protocols carry their own serialized error envelope.
-
-## Parameters
-
-<a id="value"></a>
-
-**`value`** · `unknown` · Required
-
-
-
-## Returns
-
-`value is GeometryError`
-
-
-## Related APIs
-
-- [GeometryError](GeometryError.md)
-
-## Guides
-
-- [Geometry vocabulary](../../guides/concepts.md#geometry-vocabulary)
-- [Lifecycle and inspection](../../guides/concepts.md#lifecycle-and-inspection)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/matchProfiles.md

@@ -1,42 +0,0 @@
-# matchProfiles
-
-Matches a profile family using operation settings over host resolution and limits. Requires active synchronous model execution. Use Geometry's matchProfiles for standalone preparation.
-
-**matchProfiles**(`profiles`: readonly [`Profile`](Profile.md)[], `options?`: [`MatchProfilesOptions`](MatchProfilesOptions.md)): readonly [`CorrespondingProfile`](CorrespondingProfile.md)[]
-
-
-
-## Parameters
-
-<a id="profiles"></a>
-
-**`profiles`** · readonly [`Profile`](Profile.md)[] · Required
-
-
-
-<a id="options"></a>
-
-**`options`** · [`MatchProfilesOptions`](MatchProfilesOptions.md) · Optional
-
-- [`resolution`](MatchProfilesOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Local physical sampling policy; exact interval counts take precedence.
-
-- [`limits`](MatchProfilesOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
-
-  Explicit per-profile and circular ceilings; the family also has a one-million-slot work bound.
-
-
-
-## Returns
-
-readonly [`CorrespondingProfile`](CorrespondingProfile.md)[]
-
-
-## Related APIs
-
-- [CorrespondingProfile](CorrespondingProfile.md)
-- [MatchProfilesOptions](MatchProfilesOptions.md)
-- [Profile](Profile.md)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/path2.md

@@ -1,54 +0,0 @@
-# path2
-
-Snapshots finite XY coordinates as an immutable sampled path, independent of engine initialization.
-
-**path2**(`input`: [`Path2Input`](Path2Input.md), `options?`: [`PathOptions`](PathOptions.md)): [`Path2`](Path2-type.md)
-
-
-
-Open paths may be empty or have one point; closed paths need three vertices and omit a duplicated
-seam. Repeated adjacent vertices are retained. No winding normalization or filling is performed.
-Malformed dimensions or topology throw INVALID_ARGUMENT; nonfinite coordinates or measurement
-overflow throw NON_FINITE_VALUE; exhausted allocation ceilings throw COMPLEXITY_LIMIT GeometryError.
-A path input retains its closure. Limits bound construction only; resampling takes its own limits.
-
-Use `toData()` for a frozen record that restores coordinates, closure, and dimension together.
-
-## Parameters
-
-<a id="input"></a>
-
-**`input`** · [`Path2Input`](Path2Input.md) · Required
-
-
-
-<a id="options"></a>
-
-**`options`** · [`PathOptions`](PathOptions.md) · Optional
-
-- [`closed`](PathOptions.md#closed) · `boolean` · Optional
-
-  Connects the last vertex to the first; closed paths omit the repeated seam. Defaults to false.
-
-- [`limits`](PathOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
-
-  Construction point ceiling; defaults to package sampling limits. Later sampling has its own options.
-
-
-
-## Returns
-
-[`Path2`](Path2-type.md)
-
-
-## Related APIs
-
-- [Path2](Path2-type.md)
-- [Path2Input](Path2Input.md)
-- [PathOptions](PathOptions.md)
-
-## Guides
-
-- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/path3.md

@@ -1,49 +0,0 @@
-# path3
-
-Snapshots finite XYZ coordinates as an immutable sampled path with the same closure, seam, allocation and error rules as path2. Analytic curves must be sampled explicitly first.
-
-**path3**(`input`: [`Path3Input`](Path3Input.md), `options?`: [`PathOptions`](PathOptions.md)): [`Path3`](Path3-type.md)
-
-
-
-Use `toData()` for a frozen record that restores coordinates, closure, and dimension together.
-
-## Parameters
-
-<a id="input"></a>
-
-**`input`** · [`Path3Input`](Path3Input.md) · Required
-
-
-
-<a id="options"></a>
-
-**`options`** · [`PathOptions`](PathOptions.md) · Optional
-
-- [`closed`](PathOptions.md#closed) · `boolean` · Optional
-
-  Connects the last vertex to the first; closed paths omit the repeated seam. Defaults to false.
-
-- [`limits`](PathOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
-
-  Construction point ceiling; defaults to package sampling limits. Later sampling has its own options.
-
-
-
-## Returns
-
-[`Path3`](Path3-type.md)
-
-
-## Related APIs
-
-- [Path3](Path3-type.md)
-- [Path3Input](Path3Input.md)
-- [PathOptions](PathOptions.md)
-- [path2](path2.md)
-
-## Guides
-
-- [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/preflightInternalThreadCutter.md

@@ -1,87 +0,0 @@
-# preflightInternalThreadCutter
-
-Checks compensated cutter dimensions and conservative mesh estimates against host output limits.
-
-**preflightInternalThreadCutter**(`options`: [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md)): [`ThreadSolidPreflight`](ThreadSolidPreflight.md)
-
-
-
-Requires active synchronous model execution and uses its resolution and limits. Estimates include
-the one-pitch extension beyond each requested face, without mesh buffers or native objects.
-Mesh validity, native construction, and aggregate output limits are checked later.
-
-## Parameters
-
-<a id="options"></a>
-
-**`options`** · [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md) · Required
-
-- [`nominalMajorDiameter`](InternalThreadCutterOptions.md#nominalmajordiameter) · `number` · Required
-
-  Nominal major diameter before female compensation and faceting correction.
-
-- [`length`](InternalThreadCutterOptions.md#length) · `number` · Required
-
-  Total threaded axial length in millimetres.
-
-- [`profile`](InternalThreadCutterOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
-
-  Validated periodic profile repeated around the shaft.
-
-- [`fit`](InternalThreadCutterOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`bevel`](InternalThreadCutterOptions.md#bevel) · [`Bevel`](Bevel.md) · Optional
-
-  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
-  or one sixth of the compensated male minor/female major radius for blunt ends.
-
-- [`ends`](InternalThreadCutterOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
-
-  Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
-  BOSL2-style non-cut lead-in scaling is available on complete thread solids.
-
-- [`handedness`](InternalThreadCutterOptions.md#handedness) · [`ThreadHandedness`](ThreadHandedness.md) · Optional
-
-  Helix direction. Default: `right`.
-
-- [`limits`](InternalThreadCutterOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
-
-  Explicit output and circular allocation ceilings.
-
-- [`phase`](InternalThreadCutterOptions.md#phase) · `number` · Optional
-
-  Angular offset of the first start in degrees. Default: `0`.
-
-- [`resolution`](InternalThreadCutterOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Optional circular-resolution policy.
-
-- [`starts`](InternalThreadCutterOptions.md#starts) · `number` · Optional
-
-  Number of evenly phased starts. Default: `1`.
-
-- [`tolerance`](InternalThreadCutterOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
-
-  Optional numerical tolerance overrides.
-
-
-
-## Returns
-
-[`ThreadSolidPreflight`](ThreadSolidPreflight.md)
-
-
-## Related APIs
-
-- [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
-- [ThreadSolidPreflight](ThreadSolidPreflight.md)
-- [internalThreadCutter](internalThreadCutter.md)
-
-## Guides
-
-- [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
-- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/preflightThreadedNut.md

@@ -1,103 +0,0 @@
-# preflightThreadedNut
-
-Checks nut dimensions, chamfers, end-face wall, and the extended compensated cutter's allocation plan.
-
-**preflightThreadedNut**(`options`: [`ThreadedNutOptions`](ThreadedNutOptions.md)): [`ThreadedNutPreflight`](ThreadedNutPreflight.md)
-
-
-
-Requires active synchronous model execution and uses its resolution and limits, without mesh
-buffers or native objects. Returned thread estimates cover the cutter, excluding the body and
-Boolean result. Mesh validity, native construction, and aggregate output limits are checked later.
-
-## Parameters
-
-<a id="options"></a>
-
-**`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
-
-- [`nominalMajorDiameter`](ThreadedNutOptions.md#nominalmajordiameter) · `number` · Required
-
-  Nominal major diameter before female compensation and faceting correction.
-
-- [`shape`](ThreadedNutOptions.md#shape) · [`ThreadedNutShape`](ThreadedNutShape.md) · Required
-
-  Nut body shape.
-
-- [`thickness`](ThreadedNutOptions.md#thickness) · `number` · Required
-
-  Nut thickness along +Z in millimetres.
-
-- [`width`](ThreadedNutOptions.md#width) · `number` · Required
-
-  Across-flats width for hex/square or diameter for round, in millimetres.
-
-- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
-
-  Validated periodic profile repeated around the shaft.
-
-- [`fit`](ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`innerBevel`](ThreadedNutOptions.md#innerbevel) · [`Bevel`](Bevel.md) · Optional
-
-  Opening bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4); zero disables.
-
-- [`outerBevel`](ThreadedNutOptions.md#outerbevel) · [`Bevel`](Bevel.md) · Optional
-
-  Body bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4).
-  Use [0, "auto"] to keep the outside bottom flat without disabling its inner opening bevel.
-
-- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Optional physical policy for a round body, independent of the thread's matched facet grid.
-
-- [`ends`](ThreadedNutOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
-
-  Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
-  BOSL2-style non-cut lead-in scaling is available on complete thread solids.
-
-- [`handedness`](ThreadedNutOptions.md#handedness) · [`ThreadHandedness`](ThreadHandedness.md) · Optional
-
-  Helix direction. Default: `right`.
-
-- [`limits`](ThreadedNutOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
-
-  Explicit output and circular allocation ceilings.
-
-- [`phase`](ThreadedNutOptions.md#phase) · `number` · Optional
-
-  Angular offset of the first start in degrees. Default: `0`.
-
-- [`resolution`](ThreadedNutOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Optional circular-resolution policy.
-
-- [`starts`](ThreadedNutOptions.md#starts) · `number` · Optional
-
-  Number of evenly phased starts. Default: `1`.
-
-- [`tolerance`](ThreadedNutOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
-
-  Optional numerical tolerance overrides.
-
-
-
-## Returns
-
-[`ThreadedNutPreflight`](ThreadedNutPreflight.md)
-
-
-## Related APIs
-
-- [ThreadedNutOptions](ThreadedNutOptions.md)
-- [ThreadedNutPreflight](ThreadedNutPreflight.md)
-- [threadedNut](threadedNut.md)
-
-## Guides
-
-- [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
-- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/preflightThreadedRod.md

@@ -1,87 +0,0 @@
-# preflightThreadedRod
-
-Checks compensated rod dimensions and conservative mesh estimates against host output limits.
-
-**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`ThreadSolidPreflight`](ThreadSolidPreflight.md)
-
-
-
-Requires active synchronous model execution and uses its resolution and limits. Returns selected
-sampling and conservative row/triangle estimates without mesh buffers or native objects.
-Mesh validity, native construction, and aggregate output limits are checked later.
-
-## Parameters
-
-<a id="options"></a>
-
-**`options`** · [`ThreadedRodOptions`](ThreadedRodOptions.md) · Required
-
-- [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
-
-  Nominal major diameter before male compensation.
-
-- [`length`](ThreadedRodOptions.md#length) · `number` · Required
-
-  Total threaded axial length in millimetres.
-
-- [`profile`](ThreadedRodOptions.md#profile) · [`ThreadProfile`](ThreadProfile.md) · Required
-
-  Validated periodic profile repeated around the shaft.
-
-- [`bevel`](ThreadedRodOptions.md#bevel) · [`Bevel`](Bevel.md) · Optional
-
-  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
-  or one sixth of the compensated male minor/female major radius for blunt ends.
-
-- [`fit`](ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`ends`](ThreadedRodOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
-
-  Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
-  BOSL2-style non-cut lead-in scaling is available on complete thread solids.
-
-- [`handedness`](ThreadedRodOptions.md#handedness) · [`ThreadHandedness`](ThreadHandedness.md) · Optional
-
-  Helix direction. Default: `right`.
-
-- [`limits`](ThreadedRodOptions.md#limits) · `Partial`\<[`ModelingLimits`](ModelingLimits.md)\> · Optional
-
-  Explicit output and circular allocation ceilings.
-
-- [`phase`](ThreadedRodOptions.md#phase) · `number` · Optional
-
-  Angular offset of the first start in degrees. Default: `0`.
-
-- [`resolution`](ThreadedRodOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Optional circular-resolution policy.
-
-- [`starts`](ThreadedRodOptions.md#starts) · `number` · Optional
-
-  Number of evenly phased starts. Default: `1`.
-
-- [`tolerance`](ThreadedRodOptions.md#tolerance) · [`GeometryToleranceOptions`](GeometryToleranceOptions.md) · Optional
-
-  Optional numerical tolerance overrides.
-
-
-
-## Returns
-
-[`ThreadSolidPreflight`](ThreadSolidPreflight.md)
-
-
-## Related APIs
-
-- [ThreadedRodOptions](ThreadedRodOptions.md)
-- [ThreadSolidPreflight](ThreadSolidPreflight.md)
-- [threadedRod](threadedRod.md)
-
-## Guides
-
-- [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
-- [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
-
-Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/transform2.md

@@ -1,46 +0,0 @@
-# transform2
-
-Creates an immutable XY transform, identity by default.
-
-**transform2**(`input?`: [`Transform2Input`](Transform2Input.md)): [`Transform2`](Transform2-type.md)
-
-
-
-## Example
-
-```ts
-const placement = transform2().rotate(90).translate([10, 0]);
-placement.applyPoint([1, 0]).toData(); // approximately [10, 1]
-```
-
-Values and data are copied and validated.
-Pass it directly to Section.transform() and planar data helpers; to3D() explicitly crosses into XYZ.
-Zero scales and singular matrices throw GeometryError; negative scales reflect.
-
-Use `toData()` for frozen matrix interchange.
-
-## Parameters
-
-<a id="input"></a>
-
-**`input`** · [`Transform2Input`](Transform2Input.md) · Optional
-
-
-
-## Returns
-
-[`Transform2`](Transform2-type.md)
-
-
-## Related APIs
-
-- [Transform2](Transform2-type.md)
-- [Transform2Input](Transform2Input.md)
-
-## Guides
-
-- [Named anchors and custom frames](../../guides/recipes.md#named-anchors-and-custom-frames)
-- [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
-- [Fluent values and standalone algorithms](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
-
-Package: `@metamesh/modeling@0.18.0`.