@metamesh/modeling 0.18.0 → 0.20.0

package/dist/docs/reference/mesh/threadRidge.md

@@ -2,7 +2,7 @@
 
 Builds closed thread-ridge components with every profile locked to the shaft's radial/axial frame. The mesh is intended for union with its minor-envelope cylinder and never owns WASM objects.
 
-**threadRidge**(`options`: [`ThreadRidgeOptions`](../geometry/ThreadRidgeOptions.md)): [`TriangleMesh`](../geometry/TriangleMesh.md)
+**threadRidge**(`options`: [`ThreadRidgeOptions`](../mechanical/ThreadRidgeOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -10,46 +10,48 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 
 <a id="options"></a>
 
-**`options`** · [`ThreadRidgeOptions`](../geometry/ThreadRidgeOptions.md) · Required
+**`options`** · [`ThreadRidgeOptions`](../mechanical/ThreadRidgeOptions.md) · Required
 
-- [`length`](../geometry/ThreadRidgeOptions.md#length) · `number` · Required
+Dimensions in millimetres and a validated profile; apply any fit compensation first.
+
+- [`length`](../mechanical/ThreadRidgeOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
 
-- [`majorDiameter`](../geometry/ThreadRidgeOptions.md#majordiameter) · `number` · Required
+- [`majorDiameter`](../mechanical/ThreadRidgeOptions.md#majordiameter) · `number` · Required
 
-  Nominal major diameter before any caller-owned fit compensation.
+  Major diameter in millimetres; apply any caller-owned fit compensation before construction.
 
-- [`profile`](../geometry/ThreadRidgeOptions.md#profile) · [`ThreadProfile`](../geometry/ThreadProfile-type.md) · Required
+- [`profile`](../mechanical/ThreadRidgeOptions.md#profile) · [`ThreadProfile`](../mechanical/ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
-- [`ends`](../geometry/ThreadRidgeOptions.md#ends) · [`ThreadEndTreatmentOptions`](../geometry/ThreadEndTreatmentOptions.md) · Optional
+- [`ends`](../mechanical/ThreadRidgeOptions.md#ends) · [`ThreadEndTreatmentOptions`](../mechanical/ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
   BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-- [`handedness`](../geometry/ThreadRidgeOptions.md#handedness) · [`ThreadHandedness`](../geometry/ThreadHandedness.md) · Optional
+- [`handedness`](../mechanical/ThreadRidgeOptions.md#handedness) · [`ThreadHandedness`](../mechanical/ThreadHandedness.md) · Optional
 
   Helix direction. Default: `right`.
 
-- [`limits`](../geometry/ThreadRidgeOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](../mechanical/ThreadRidgeOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
-- [`phase`](../geometry/ThreadRidgeOptions.md#phase) · `number` · Optional
+- [`phase`](../mechanical/ThreadRidgeOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](../geometry/ThreadRidgeOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](../mechanical/ThreadRidgeOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
-- [`starts`](../geometry/ThreadRidgeOptions.md#starts) · `number` · Optional
+- [`starts`](../mechanical/ThreadRidgeOptions.md#starts) · `number` · Optional
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](../geometry/ThreadRidgeOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
+- [`tolerance`](../mechanical/ThreadRidgeOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
@@ -57,16 +59,21 @@ Builds closed thread-ridge components with every profile locked to the shaft's r
 
 ## Returns
 
-[`TriangleMesh`](../geometry/TriangleMesh.md)
+[`TriangleMesh`](TriangleMesh.md)
 
 
 ## Related APIs
 
-- [ThreadRidgeOptions](ThreadRidgeOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
 ## Guides
 
-- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+
+## Import
+
+```ts
+import * as mesh from "@metamesh/modeling/geometry/mesh";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/threadSolid.md

@@ -2,7 +2,7 @@
 
 Builds one closed threaded cylinder without a ridge/core Boolean seam.
 
-**threadSolid**(`options`: [`ThreadSolidOptions`](../geometry/ThreadSolidOptions.md)): [`TriangleMesh`](../geometry/TriangleMesh.md)
+**threadSolid**(`options`: [`ThreadSolidOptions`](../mechanical/ThreadSolidOptions.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -16,58 +16,60 @@ arrays.
 
 <a id="options"></a>
 
-**`options`** · [`ThreadSolidOptions`](../geometry/ThreadSolidOptions.md) · Required
+**`options`** · [`ThreadSolidOptions`](../mechanical/ThreadSolidOptions.md) · Required
 
-- [`length`](../geometry/ThreadSolidOptions.md#length) · `number` · Required
+Dimensions in millimetres and a validated profile; apply any fit compensation first.
+
+- [`length`](../mechanical/ThreadSolidOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
 
-- [`majorDiameter`](../geometry/ThreadSolidOptions.md#majordiameter) · `number` · Required
+- [`majorDiameter`](../mechanical/ThreadSolidOptions.md#majordiameter) · `number` · Required
 
-  Nominal major diameter before any caller-owned fit compensation.
+  Major diameter in millimetres; apply any caller-owned fit compensation before construction.
 
-- [`profile`](../geometry/ThreadSolidOptions.md#profile) · [`ThreadProfile`](../geometry/ThreadProfile-type.md) · Required
+- [`profile`](../mechanical/ThreadSolidOptions.md#profile) · [`ThreadProfile`](../mechanical/ThreadProfile-type.md) · Required
 
   Validated periodic profile repeated around the shaft.
 
-- [`ends`](../geometry/ThreadSolidOptions.md#ends) · [`ThreadEndTreatmentOptions`](../geometry/ThreadEndTreatmentOptions.md) · Optional
+- [`ends`](../mechanical/ThreadSolidOptions.md#ends) · [`ThreadEndTreatmentOptions`](../mechanical/ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
   BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-- [`handedness`](../geometry/ThreadSolidOptions.md#handedness) · [`ThreadHandedness`](../geometry/ThreadHandedness.md) · Optional
+- [`handedness`](../mechanical/ThreadSolidOptions.md#handedness) · [`ThreadHandedness`](../mechanical/ThreadHandedness.md) · Optional
 
   Helix direction. Default: `right`.
 
-- [`limits`](../geometry/ThreadSolidOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
+- [`limits`](../mechanical/ThreadSolidOptions.md#limits) · `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\> · Optional
 
   Explicit output and circular allocation ceilings.
 
-- [`phase`](../geometry/ThreadSolidOptions.md#phase) · `number` · Optional
+- [`phase`](../mechanical/ThreadSolidOptions.md#phase) · `number` · Optional
 
   Angular offset of the first start in degrees. Default: `0`.
 
-- [`resolution`](../geometry/ThreadSolidOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
+- [`resolution`](../mechanical/ThreadSolidOptions.md#resolution) · [`GeometryResolution`](../geometry/GeometryResolution.md) · Optional
 
   Optional circular-resolution policy.
 
-- [`starts`](../geometry/ThreadSolidOptions.md#starts) · `number` · Optional
+- [`starts`](../mechanical/ThreadSolidOptions.md#starts) · `number` · Optional
 
   Number of evenly phased starts. Default: `1`.
 
-- [`tolerance`](../geometry/ThreadSolidOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
+- [`tolerance`](../mechanical/ThreadSolidOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Optional numerical tolerance overrides.
 
-- [`bevel`](../geometry/ThreadSolidOptions.md#bevel) · [`Bevel`](../geometry/Bevel.md) · Optional
+- [`bevel`](../mechanical/ThreadSolidOptions.md#bevel) · [`Bevel`](../mechanical/Bevel.md) · Optional
 
   Independent 45-degree bottom/top bevels; omitted disables both. Auto uses profile depth.
 
-- [`bevelOffset`](../geometry/ThreadSolidOptions.md#beveloffset) · `number` · Optional
+- [`bevelOffset`](../mechanical/ThreadSolidOptions.md#beveloffset) · `number` · Optional
 
-  Distance of each bevel target face inward from the corresponding mesh end.
+  Distance in millimetres of each bevel target face inward from the corresponding mesh end.
 
-- [`bevelMode`](../geometry/ThreadSolidOptions.md#bevelmode) · `"inset"` \| `"outset"` · Optional
+- [`bevelMode`](../mechanical/ThreadSolidOptions.md#bevelmode) · `"inset"` \| `"outset"` · Optional
 
   `inset` trims an external rod; `outset` expands an internal cutter.
 
@@ -75,16 +77,21 @@ arrays.
 
 ## Returns
 
-[`TriangleMesh`](../geometry/TriangleMesh.md)
+[`TriangleMesh`](TriangleMesh.md)
 
 
 ## Related APIs
 
-- [ThreadSolidOptions](ThreadSolidOptions.md)
 - [TriangleMesh](TriangleMesh.md)
 
 ## Guides
 
-- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
+
+## Import
+
+```ts
+import * as mesh from "@metamesh/modeling/geometry/mesh";
+```
 
-Package: `@metamesh/modeling@0.18.0`.
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/transform.md

@@ -2,7 +2,7 @@
 
 Applies an affine transform to a mesh and preserves outward face orientation.
 
-**transform**(`mesh`: [`TriangleMeshInput`](../geometry/TriangleMeshInput.md), `placement`: [`Transform3Input`](../geometry/Transform3Input.md)): [`TriangleMesh`](../geometry/TriangleMesh.md)
+**transform**(`mesh`: [`TriangleMeshInput`](TriangleMeshInput.md), `placement`: [`Transform3Input`](../geometry/Transform3Input.md)): [`TriangleMesh`](TriangleMesh.md)
 
 
 
@@ -13,7 +13,7 @@ automatically reverses every triangle. Singular transforms are rejected.
 
 <a id="mesh"></a>
 
-**`mesh`** · [`TriangleMeshInput`](../geometry/TriangleMeshInput.md) · Required
+**`mesh`** · [`TriangleMeshInput`](TriangleMeshInput.md) · Required
 
 Mesh to transform without mutation.
 
@@ -23,25 +23,30 @@ Mesh to transform without mutation.
 
 **`placement`** · [`Transform3Input`](../geometry/Transform3Input.md) · Required
 
-Immutable spatial placement or canonical row-major affine matrix.
+Frame, fluent transform, or row-major affine matrix.
 
 
 
 ## Returns
 
-[`TriangleMesh`](../geometry/TriangleMesh.md)
+[`TriangleMesh`](TriangleMesh.md)
 
 A mesh with fresh transformed positions and copied or reversed indices.
 
 
 ## Related APIs
 
-- [Transform3Input](Transform3Input.md)
 - [TriangleMesh](TriangleMesh.md)
 - [TriangleMeshInput](TriangleMeshInput.md)
 
 ## Guides
 
-- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import * as mesh from "@metamesh/modeling/geometry/mesh";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/validate.md

@@ -2,7 +2,7 @@
 
 Validates mesh buffers, indices, triangle area, and optionally closed topology.
 
-**validate**\<`T` *extends* [`TriangleMeshInput`](../geometry/TriangleMeshInput.md)\>(`mesh`: `T`, `options?`: [`TriangleMeshValidationOptions`](../geometry/TriangleMeshValidationOptions.md)): `T`
+**validate**\<`T` *extends* [`TriangleMeshInput`](TriangleMeshInput.md)\>(`mesh`: `T`, `options?`: [`TriangleMeshValidationOptions`](TriangleMeshValidationOptions.md)): `T`
 
 
 
@@ -14,7 +14,7 @@ self-intersections between faces. The mesh is neither mutated nor copied.
 
 ### T
 
-`T` *extends* [`TriangleMeshInput`](../geometry/TriangleMeshInput.md)
+`T` *extends* [`TriangleMeshInput`](TriangleMeshInput.md)
 
 ## Parameters
 
@@ -22,25 +22,25 @@ self-intersections between faces. The mesh is neither mutated nor copied.
 
 **`mesh`** · `T` · Required
 
-Mesh to inspect.
+Raw or captured indexed buffers with complete finite XYZ vertices.
 
 
 
 <a id="options"></a>
 
-**`options`** · [`TriangleMeshValidationOptions`](../geometry/TriangleMeshValidationOptions.md) · Optional
+**`options`** · [`TriangleMeshValidationOptions`](TriangleMeshValidationOptions.md) · Optional
 
 Empty-mesh, topology, and tolerance policy.
 
-- [`allowEmpty`](../geometry/TriangleMeshValidationOptions.md#allowempty) · `boolean` · Optional
+- [`allowEmpty`](TriangleMeshValidationOptions.md#allowempty) · `boolean` · Optional
 
   Permit an empty position and index buffer. Defaults to `false`.
 
-- [`requireClosed`](../geometry/TriangleMeshValidationOptions.md#requireclosed) · `boolean` · Optional
+- [`requireClosed`](TriangleMeshValidationOptions.md#requireclosed) · `boolean` · Optional
 
   Require two oppositely wound faces per edge; geometric self-intersections are not detected.
 
-- [`tolerance`](../geometry/TriangleMeshValidationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
+- [`tolerance`](TriangleMeshValidationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Numeric comparison overrides used for zero-area triangle detection.
 
@@ -64,6 +64,12 @@ The original mesh after successful validation.
 
 ## Guides
 
-- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import * as mesh from "@metamesh/modeling/geometry/mesh";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh/validateSolid.md

@@ -2,7 +2,7 @@
 
 Checks closed indexed topology, triangle intersections, and alternating nested shell orientation.
 
-**validateSolid**\<`T` *extends* [`TriangleMeshInput`](../geometry/TriangleMeshInput.md)\>(`mesh`: `T`, `options?`: [`SolidMeshValidationOptions`](../geometry/SolidMeshValidationOptions.md)): `T`
+**validateSolid**\<`T` *extends* [`TriangleMeshInput`](TriangleMeshInput.md)\>(`mesh`: `T`, `options?`: [`SolidMeshValidationOptions`](SolidMeshValidationOptions.md)): `T`
 
 
 
@@ -18,7 +18,7 @@ Input buffers are freshly inspected and never modified; units are millimetres.
 
 ### T
 
-`T` *extends* [`TriangleMeshInput`](../geometry/TriangleMeshInput.md)
+`T` *extends* [`TriangleMeshInput`](TriangleMeshInput.md)
 
 ## Parameters
 
@@ -32,15 +32,15 @@ Closed triangle mesh to inspect.
 
 <a id="options"></a>
 
-**`options`** · [`SolidMeshValidationOptions`](../geometry/SolidMeshValidationOptions.md) · Optional
+**`options`** · [`SolidMeshValidationOptions`](SolidMeshValidationOptions.md) · Optional
 
-Optional lower work ceiling and numeric comparison policy.
+Lower work limit and tolerance for numeric comparisons.
 
-- [`maxTests`](../geometry/SolidMeshValidationOptions.md#maxtests) · `number` · Optional
+- [`maxTests`](SolidMeshValidationOptions.md#maxtests) · `number` · Optional
 
   Work ceiling for spatial comparisons and containment tests; defaults to 2,000,000 and may only lower it.
 
-- [`tolerance`](../geometry/SolidMeshValidationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
+- [`tolerance`](SolidMeshValidationOptions.md#tolerance) · [`GeometryToleranceOptions`](../geometry/GeometryToleranceOptions.md) · Optional
 
   Distance comparison policy in millimetres; near contacts reject conservatively.
 
@@ -60,6 +60,12 @@ The original mesh after every requested check succeeds.
 
 ## Guides
 
-- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+- [Exact counts and preflight guarantees](../../guides/resolution-and-inspection.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import * as mesh from "@metamesh/modeling/geometry/mesh";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/mesh.md

@@ -2,7 +2,7 @@
 
 Construct, transform, inspect, and process triangle buffers without a native engine.
 
-Use `@metamesh/modeling/geometry/mesh` to construct and process ordinary `TriangleMesh` values. Import the module directly so bundlers can remove unused operations and their dependencies. Mesh option and result types are exported beside their operations; profile helpers and transforms live in `/geometry`.
+Use `@metamesh/modeling/geometry/mesh` to construct and process ordinary `TriangleMesh` values. Import the module directly so bundlers can remove unused operations and their dependencies. Mesh-specific option and result types live in this entry. Shared construction options keep their owning import: `LoftOptions` comes from `@metamesh/modeling`, while `ThreadSolidOptions` comes from `/geometry/mechanical`. Profile helpers and transforms live in `/geometry`.
 
 ```ts
 import { rectangleContour, transform3 } from "@metamesh/modeling/geometry";
@@ -18,4 +18,10 @@ Operations return copied buffers or their documented measurement and processing
 
 - [Mesh operations](mesh/categories/operations.md) — Construct, transform, validate, analyze, and optimize indexed meshes.
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import * as mesh from "@metamesh/modeling/geometry/mesh";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/BoxEdge.md

@@ -9,7 +9,15 @@ Box edges use +Z top, +Y front and +X right; vertical names list front/back firs
 
 ## Guides
 
-- [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
-- [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import type { BoxEdge } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/BoxEdgeSelection.md

@@ -13,7 +13,15 @@ Named individual edges or top/bottom rims and all four vertical edges.
 
 ## Guides
 
-- [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
-- [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import type { BoxEdgeSelection } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/BoxEdgeTreatments.md

@@ -2,7 +2,7 @@
 
 Independent treatments for disjoint named edge selections; overlapping selections fail.
 
-**BoxEdgeTreatments** = `Readonly`\<`Partial`\<`Record`\<[`BoxEdgeSelection`](BoxEdgeSelection.md), [`EdgeTreatment`](EdgeTreatment.md)\>\>\>
+**BoxEdgeTreatments** = `Readonly`\<`Partial`\<`Record`\<[`BoxEdgeSelection`](BoxEdgeSelection.md), [`EdgeTreatment`](../geometry/EdgeTreatment.md)\>\>\>
 
 
 
@@ -10,11 +10,18 @@ Independent treatments for disjoint named edge selections; overlapping selection
 ## Related APIs
 
 - [BoxEdgeSelection](BoxEdgeSelection.md)
-- [EdgeTreatment](EdgeTreatment.md)
 
 ## Guides
 
-- [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
-- [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import type { BoxEdgeTreatments } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/BoxOptions.md

@@ -12,7 +12,7 @@ Dimensions, placement, and uniform or independently selected finishing for an ax
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>
+`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](../geometry/GeometrySamplingLimits.md)\>
 
 
 
@@ -40,7 +40,7 @@ Centers the box on the XYZ origin when `true`; otherwise its minimum corner is a
 
 
 
-`readonly` **size**: `number` \| [`Vector3Input`](Vector3Input.md)
+`readonly` **size**: `number` \| [`Vector3Input`](../geometry/Vector3Input.md)
 
 
 
@@ -52,7 +52,7 @@ Positive uniform size or explicit `[X, Y, Z]` extents in millimetres.
 
 
 
-`readonly` `optional` **treatment?**: [`EdgeTreatment`](EdgeTreatment.md) \| `Readonly`\<`Partial`\<`Record`\<[`BoxEdgeSelection`](BoxEdgeSelection.md), [`EdgeTreatment`](EdgeTreatment.md)\>\>\>
+`readonly` `optional` **treatment?**: [`EdgeTreatment`](../geometry/EdgeTreatment.md) \| `Readonly`\<`Partial`\<`Record`\<[`BoxEdgeSelection`](BoxEdgeSelection.md), [`EdgeTreatment`](../geometry/EdgeTreatment.md)\>\>\>
 
 
 
@@ -78,15 +78,20 @@ Applied after local construction; Section attachment must preserve the XY plane.
 ## Related APIs
 
 - [BoxEdgeSelection](BoxEdgeSelection.md)
-- [EdgeTreatment](EdgeTreatment.md)
-- [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [PrimitiveAttachment](PrimitiveAttachment.md)
 - [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
-- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
-- [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
-- [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import type { BoxOptions } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/CircleOptions.md

@@ -2,20 +2,25 @@
 
 Circular dimensions with exactly one nominal radius or diameter.
 
-**CircleOptions** = [`CircleContourOptions`](CircleContourOptions.md) & [`PrimitiveAttachment`](PrimitiveAttachment.md)
+**CircleOptions** = [`CircleContourOptions`](../geometry/CircleContourOptions.md) & [`PrimitiveAttachment`](PrimitiveAttachment.md)
 
 
 
 
 ## Related APIs
 
-- [CircleContourOptions](CircleContourOptions.md)
 - [PrimitiveAttachment](PrimitiveAttachment.md)
 
 ## Guides
 
-- [Section, hole, offset, and extrusion](../../guides/recipes.md#section-hole-offset-and-extrusion)
-- [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
-- [Text and font variability](../../guides/concepts.md#text-and-font-variability)
+- [Section, hole, offset, and extrusion](../../guides/profiles-and-extrusion.md#section-hole-offset-and-extrusion)
+- [SVG sections: fills and strokes are different inputs](../../guides/svg-and-text.md#svg-sections-fills-and-strokes-are-different-inputs)
+- [Text and font variability](../../guides/svg-and-text.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.18.0`.
+## Import
+
+```ts
+import type { CircleOptions } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.

package/dist/docs/reference/model/CornerCutterOptions.md

@@ -0,0 +1,93 @@
+# CornerCutterOptions
+
+A subtractive corner transition for material occupying the positive XYZ octant. Round treatments share their lattice with right-angle edge cutters; full-circle segment requests round up to a multiple of four.
+
+## Extends
+
+- [`PrimitiveAttachment`](PrimitiveAttachment.md)
+
+## Properties
+
+### treatment
+
+
+
+`readonly` **treatment**: [`CornerCutterTreatment`](CornerCutterTreatment.md)
+
+
+
+Round sphere or triangular chamfer meeting three equal perpendicular edge treatments.
+
+***
+
+### excess?
+
+
+
+`readonly` `optional` **excess?**: `number`
+
+
+
+Numerical extension outside the three material faces, in millimetres; defaults to 0.05.
+
+***
+
+### resolution?
+
+
+
+`readonly` `optional` **resolution?**: [`GeometryResolution`](../geometry/GeometryResolution.md)
+
+
+
+Physical sphere sampling; explicit round-treatment sampling takes precedence.
+
+***
+
+### limits?
+
+
+
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](../geometry/ModelingLimits.md)\>
+
+
+
+Local allocation ceilings may only lower the evaluating host's limits.
+
+***
+
+### attachment?
+
+
+
+`readonly` `optional` **attachment?**: [`PrimitiveAttachmentOptions`](PrimitiveAttachmentOptions.md)
+
+
+
+Applied after local construction; Section attachment must preserve the XY plane.
+
+#### Inherited from
+
+[`PrimitiveAttachment`](PrimitiveAttachment.md).[`attachment`](PrimitiveAttachment.md#attachment)
+
+
+## Related APIs
+
+- [CornerCutterTreatment](CornerCutterTreatment.md)
+- [PrimitiveAttachment](PrimitiveAttachment.md)
+- [PrimitiveAttachmentOptions](PrimitiveAttachmentOptions.md)
+
+## Guides
+
+- [Choose a primitive](../../guides/profiles-and-extrusion.md#choose-a-primitive)
+- [Treated boxes, frustums, and mirrored arrays](../../guides/profiles-and-extrusion.md#treated-boxes-frustums-and-mirrored-arrays)
+- [Finish a profile with a hole](../../guides/profiles-and-extrusion.md#finish-a-profile-with-a-hole)
+- [Shape openings and local edges](../../guides/profiles-and-extrusion.md#shape-openings-and-local-edges)
+
+## Import
+
+```ts
+import type { CornerCutterOptions } from "@metamesh/modeling";
+```
+
+Package: `@metamesh/modeling@0.20.0`.