@metamesh/modeling 0.16.0 → 0.18.0

package/dist/docs/reference/model/ImmutableValue.md

@@ -0,0 +1,20 @@
+# ImmutableValue
+
+Deeply readonly view of captured generation data, including nested arrays and tuples. Modeling value methods keep their signatures, including explicit mutable copies. This type does not make unsupported runtime values valid generation data.
+
+**ImmutableValue**\<`T`\> = `T` *extends* (...`args`: `never`[]) => `unknown` ? `T` : `T` *extends* `object` ? `{ readonly [Key in keyof T]: ImmutableValue<T[Key]> }` : `T`
+
+
+
+## Type Parameters
+
+### T
+
+`T`
+
+
+## Guides
+
+- [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
+
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/ImplicitOptions.md

@@ -80,4 +80,4 @@ Positive native geometric tolerance in millimetres; omitted uses interpolated gr
 - [Bounds3Data](Bounds3Data.md)
 - [Vector3Data](Vector3Data.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/InternalThreadCutterOptions.md

@@ -4,243 +4,213 @@ Options for a compensated internal-thread subtraction tool along +Z.
 
 ## Extends
 
-- `Omit`\<[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md), `"majorDiameter"`\>
-- `ThreadBevelOptions`
+- `Omit`\<[`ThreadRidgeOptions`](ThreadRidgeOptions.md), `"majorDiameter"`\>
+- [`ThreadBevelOptions`](ThreadBevelOptions.md)
 
 ## Properties
 
-### ends?
-
-
+### fit?
 
-`readonly` `optional` **ends?**: [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md)
 
 
+`readonly` `optional` **fit?**: [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md)
 
-Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
-BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-#### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`ends`](HelicalThreadRidgeMeshOptions.md#ends)
+Printable fit or caller-calibrated allowances. Default: `normal`.
 
 ***
 
-### handedness?
-
-
+### nominalMajorDiameter
 
-`readonly` `optional` **handedness?**: [`ThreadHandedness`](ThreadHandedness.md)
 
 
+`readonly` **nominalMajorDiameter**: `number`
 
-Helix direction. Default: `right`.
 
-#### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`handedness`](HelicalThreadRidgeMeshOptions.md#handedness)
+Nominal major diameter before female compensation and faceting correction.
 
 ***
 
-### length
+### bevel?
 
 
 
-`readonly` **length**: `number`
+`readonly` `optional` **bevel?**: [`Bevel`](Bevel.md)
 
 
 
-Total threaded axial length in millimetres.
+Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+or one sixth of the compensated male minor/female major radius for blunt ends.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`length`](HelicalThreadRidgeMeshOptions.md#length)
+[`ThreadBevelOptions`](ThreadBevelOptions.md).[`bevel`](ThreadBevelOptions.md#bevel)
 
 ***
 
-### limits?
+### ends?
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
+`readonly` `optional` **ends?**: [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md)
 
 
 
-Explicit output and circular allocation ceilings.
+Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
+BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`limits`](HelicalThreadRidgeMeshOptions.md#limits)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`ends`](ThreadRidgeOptions.md#ends)
 
 ***
 
-### phase?
+### handedness?
 
 
 
-`readonly` `optional` **phase?**: `number`
+`readonly` `optional` **handedness?**: [`ThreadHandedness`](ThreadHandedness.md)
 
 
 
-Angular offset of the first start in degrees. Default: `0`.
+Helix direction. Default: `right`.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`phase`](HelicalThreadRidgeMeshOptions.md#phase)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`handedness`](ThreadRidgeOptions.md#handedness)
 
 ***
 
-### profile
+### length
 
 
 
-`readonly` **profile**: [`ThreadProfile`](ThreadProfile.md)
+`readonly` **length**: `number`
 
 
 
-Validated periodic profile repeated around the shaft.
+Total threaded axial length in millimetres.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`profile`](HelicalThreadRidgeMeshOptions.md#profile)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`length`](ThreadRidgeOptions.md#length)
 
 ***
 
-### resolution?
+### limits?
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
 
 
 
-Optional circular-resolution policy.
+Explicit output and circular allocation ceilings.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`resolution`](HelicalThreadRidgeMeshOptions.md#resolution)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`limits`](ThreadRidgeOptions.md#limits)
 
 ***
 
-### starts?
+### phase?
 
 
 
-`readonly` `optional` **starts?**: `number`
+`readonly` `optional` **phase?**: `number`
 
 
 
-Number of evenly phased starts. Default: `1`.
+Angular offset of the first start in degrees. Default: `0`.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`starts`](HelicalThreadRidgeMeshOptions.md#starts)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`phase`](ThreadRidgeOptions.md#phase)
 
 ***
 
-### tolerance?
+### profile
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` **profile**: [`ThreadProfile`](ThreadProfile.md)
 
 
 
-Optional numerical tolerance overrides.
+Validated periodic profile repeated around the shaft.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`tolerance`](HelicalThreadRidgeMeshOptions.md#tolerance)
-
-***
-
-### fit?
-
-
-
-`readonly` `optional` **fit?**: [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md)
-
-
-
-Printable fit or caller-calibrated allowances. Default: `normal`.
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`profile`](ThreadRidgeOptions.md#profile)
 
 ***
 
-### nominalMajorDiameter
-
-
-
-`readonly` **nominalMajorDiameter**: `number`
-
-
-
-Nominal major diameter before female compensation and faceting correction.
-
-***
-
-### bevelBottom?
+### resolution?
 
 
 
-`readonly` `optional` **bevelBottom?**: `boolean`
+`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
 
 
 
-Apply a 45-degree bevel at Z=0.
+Optional circular-resolution policy.
 
 #### Inherited from
 
-`ThreadBevelOptions.bevelBottom`
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`resolution`](ThreadRidgeOptions.md#resolution)
 
 ***
 
-### bevelSize?
+### starts?
 
 
 
-`readonly` `optional` **bevelSize?**: `number`
+`readonly` `optional` **starts?**: `number`
 
 
 
-Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-male minor radius or female major radius; other ends default to the profile depth.
+Number of evenly phased starts. Default: `1`.
 
 #### Inherited from
 
-`ThreadBevelOptions.bevelSize`
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`starts`](ThreadRidgeOptions.md#starts)
 
 ***
 
-### bevelTop?
+### tolerance?
 
 
 
-`readonly` `optional` **bevelTop?**: `boolean`
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
 
 
 
-Apply a 45-degree bevel at Z=length.
+Optional numerical tolerance overrides.
 
 #### Inherited from
 
-`ThreadBevelOptions.bevelTop`
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`tolerance`](ThreadRidgeOptions.md#tolerance)
 
 
 ## Related APIs
 
+- [Bevel](Bevel.md)
 - [GeometryResolution](GeometryResolution.md)
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [HelicalThreadRidgeMeshOptions](HelicalThreadRidgeMeshOptions.md)
 - [ModelingLimits](ModelingLimits.md)
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
+- [ThreadBevelOptions](ThreadBevelOptions.md)
 - [ThreadEndTreatmentOptions](ThreadEndTreatmentOptions.md)
 - [ThreadHandedness](ThreadHandedness.md)
 - [ThreadProfile](ThreadProfile.md)
+- [ThreadRidgeOptions](ThreadRidgeOptions.md)
 
 ## Guides
 
 - [Build printable threads](https://metamesh.studio/docs/develop/printable-threads#build-the-first-mating-pair)
 - [Preflight guarantees and host settings](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHinge-type.md

@@ -44,4 +44,4 @@ Centered +X pin axis with +Z roll guide; opening and lift-off withdrawal are cal
 - [Anchor3](Anchor3.md)
 - [Solid](Solid.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHingeBaseSpec.md

@@ -74,4 +74,4 @@ Nonnegative per-side radial allowance; bores circumscribe this running envelope.
 
 Nonnegative total air gap between each neighboring pair of knuckle ends.
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHingeHalfOptions.md

@@ -1,6 +1,6 @@
 # KnuckleHingeHalfOptions
 
-Optional mounting and outer-rim treatment for one knuckle owner.
+Optional mounting and edge treatment for one knuckle owner.
 
 ## Properties
 
@@ -16,19 +16,23 @@ Omit for barrels only. Each interval receives one web; disconnected intervals ne
 
 ***
 
-### barrelChamfer?
+### chamfer?
 
 
 
-`readonly` `optional` **barrelChamfer?**: `number`
+`readonly` `optional` **chamfer?**: `number`
 
 
 
-45° setback in millimetres at both ends of every barrel; defaults to 0.
+Nonnegative 45° setback in millimetres on barrel outer rims and exposed web edges; defaults to 0.
+The root at the pin centreline stays square so its faces can merge with the barrel.
+
+Must leave a positive barrel wall and axial band. Web thickness must exceed twice the setback;
+web reach and knuckle length must exceed `2 * Math.SQRT2 * chamfer` to retain the end contours.
 
 
 ## Related APIs
 
 - [KnuckleHingeWeb](KnuckleHingeWeb.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHingeOptions.md

@@ -16,7 +16,7 @@ Joint declaration with independent attachments; unspecified sampling inherits th
 
 
 
-Optional attachment and rim treatment for A, which owns an integral pin when present.
+Optional attachment and edge treatment for A, which owns an integral pin when present.
 
 ### halfB?
 
@@ -26,7 +26,7 @@ Optional attachment and rim treatment for A, which owns an integral pin when pre
 
 
 
-Optional attachment and rim treatment for B, which always carries a running bore.
+Optional attachment and edge treatment for B, which always carries a running bore.
 
 
 ## Related APIs
@@ -35,4 +35,4 @@ Optional attachment and rim treatment for B, which always carries a running bore
 - [KnuckleHingeSamplingOptions](KnuckleHingeSamplingOptions.md)
 - [KnuckleHingeSpec](KnuckleHingeSpec.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHingeSamplingOptions.md

@@ -44,4 +44,4 @@ Explicit allocation ceilings; defaults to the pure geometry sampling limits.
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHingeSpec.md

@@ -15,4 +15,4 @@ Lift-off requires exactly two intervals; A's integral pin enters B without a far
 
 - [KnuckleHingeBaseSpec](KnuckleHingeBaseSpec.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/KnuckleHingeWeb.md

@@ -48,6 +48,6 @@ Lower-face Z coordinate in the pin-centered frame, in millimetres. Must overlap
 
 
 
-Positive thickness along +Z. Webs have square edges and span their own barrel intervals.
+Positive thickness along +Z. Each web spans its own barrel interval.
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/LinearPatternOptions.md

@@ -36,4 +36,4 @@ Direction of repetition; magnitude is ignored. Defaults to +X.
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 - [Fluent values and standalone algorithms](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/LoftCorrespondence.md

@@ -24,4 +24,4 @@ correspondence must remain authoritative.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/LoftOptions.md

@@ -1,6 +1,6 @@
 # LoftOptions
 
-Shared controls for native and pure lofts. Point data and arbitrary Sections require explicit correspondence.
+Shared controls for native and pure lofts. Point data and arbitrary Sections default to direct correspondence.
 
 ## Properties
 
@@ -12,7 +12,7 @@ Shared controls for native and pure lofts. Point data and arbitrary Sections req
 
 
 
-One method or one per consecutive station gap. Omitted preserves known landmarks, including circle/ellipse-to-rectangle corners, or maps other unlike primitive seams directly.
+One method or one per consecutive station gap. Omitted preserves known primitive landmarks, including circle/ellipse-to-rectangle corners, and otherwise uses direct correspondence with the supplied seams.
 
 ***
 
@@ -88,4 +88,4 @@ Explicit output and sampling budgets; native operations may only lower host ceil
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/LoftPlacement.md

@@ -70,4 +70,4 @@ Excluded when an explicit spatial frame is supplied.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/LoftStation.md

@@ -32,4 +32,4 @@ Filled Section recipe or ordered XY boundary point data.
 - [Matched-section loft](../../guides/recipes.md#matched-section-loft)
 - [Choose a modeling path](../../guides/concepts.md#choose-a-modeling-path)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/MatchProfilesOptions.md

@@ -32,4 +32,4 @@ Explicit per-profile and circular ceilings; the family also has a one-million-sl
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/ModelProgram.md

@@ -6,7 +6,7 @@ Stateless portable program descriptor. Execution and caches belong to an engine
 
 ### P
 
-`P`
+`P` *extends* `object`
 
 ### S
 
@@ -45,4 +45,4 @@ Typed synchronous declaration callback.
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/ModelingLimits.md

@@ -123,4 +123,4 @@ Maximum unique transferable output backing-buffer bytes.
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/NumericArray.md

@@ -11,4 +11,4 @@ Numeric storage supported by immutable generation buffers.
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/{GeneratedPart.md → PartDeclaration.md}

@@ -1,4 +1,4 @@
-# GeneratedPart
+# PartDeclaration
 
 One declared output part. Construct with the context's `part` helper.
 
@@ -36,35 +36,20 @@ Local geometry or a lazy reader; native objects never cross a revision.
 
 ***
 
-### position?
+### transform?
 
 
 
-`readonly` `optional` **position?**: [`ComputedValue`](ComputedValue.md)\<[`Vector3Input`](Vector3Input.md)\>
+`readonly` `optional` **transform?**: [`ComputedValue`](ComputedValue.md)\<[`Transform3Input`](Transform3Input.md)\>
 
 
 
-XYZ vector or tuple translation in millimetres, applied after rotation; defaults to zero.
+Rigid local-to-world transform; translation uses millimetres. Defaults to identity.
+Accepts a fluent transform or row-major 4x4 matrix. Scale, shear, and reflection are invalid.
 
 #### Inherited from
 
-[`PartOptions`](PartOptions.md).[`position`](PartOptions.md#position)
-
-***
-
-### rotation?
-
-
-
-`readonly` `optional` **rotation?**: [`ComputedValue`](ComputedValue.md)\<[`Vector3Input`](Vector3Input.md)\>
-
-
-
-XYZ vector or tuple of fixed global X, Y, Z rotations in degrees; defaults to zero.
-
-#### Inherited from
-
-[`PartOptions`](PartOptions.md).[`rotation`](PartOptions.md#rotation)
+[`PartOptions`](PartOptions.md).[`transform`](PartOptions.md#transform)
 
 ***
 
@@ -88,10 +73,10 @@ Optional six-digit hexadecimal semantic part color.
 - [ComputedValue](ComputedValue.md)
 - [PartGeometry](PartGeometry.md)
 - [PartOptions](PartOptions.md)
-- [Vector3Input](Vector3Input.md)
+- [Transform3Input](Transform3Input.md)
 
 ## Guides
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/PartGeometry.md

@@ -2,7 +2,7 @@
 
 Manufacturing geometry; filled sections are intermediate construction values.
 
-**PartGeometry** = [`Solid`](Solid.md) \| [`TriangleMesh`](TriangleMesh.md) \| [`ImmutableTriangleMesh`](ImmutableTriangleMesh.md)
+**PartGeometry** = [`Solid`](Solid.md) \| [`TriangleMesh`](TriangleMesh.md) \| [`ImmutableTriangleMesh`](../geometry/ImmutableTriangleMesh.md)
 
 
 
@@ -17,4 +17,4 @@ Manufacturing geometry; filled sections are intermediate construction values.
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/PartOptions.md

@@ -4,7 +4,7 @@ Appearance and rigid placement of a finished local manufacturing part.
 
 ## Extended by
 
-- [`GeneratedPart`](GeneratedPart.md)
+- [`PartDeclaration`](PartDeclaration.md)
 
 ## Properties
 
@@ -20,27 +20,16 @@ Local geometry or a lazy reader; native objects never cross a revision.
 
 ***
 
-### position?
+### transform?
 
 
 
-`readonly` `optional` **position?**: [`ComputedValue`](ComputedValue.md)\<[`Vector3Input`](Vector3Input.md)\>
+`readonly` `optional` **transform?**: [`ComputedValue`](ComputedValue.md)\<[`Transform3Input`](Transform3Input.md)\>
 
 
 
-XYZ vector or tuple translation in millimetres, applied after rotation; defaults to zero.
-
-***
-
-### rotation?
-
-
-
-`readonly` `optional` **rotation?**: [`ComputedValue`](ComputedValue.md)\<[`Vector3Input`](Vector3Input.md)\>
-
-
-
-XYZ vector or tuple of fixed global X, Y, Z rotations in degrees; defaults to zero.
+Rigid local-to-world transform; translation uses millimetres. Defaults to identity.
+Accepts a fluent transform or row-major 4x4 matrix. Scale, shear, and reflection are invalid.
 
 ***
 
@@ -58,12 +47,12 @@ Optional six-digit hexadecimal semantic part color.
 ## Related APIs
 
 - [ComputedValue](ComputedValue.md)
-- [GeneratedPart](GeneratedPart.md)
+- [PartDeclaration](PartDeclaration.md)
 - [PartGeometry](PartGeometry.md)
-- [Vector3Input](Vector3Input.md)
+- [Transform3Input](Transform3Input.md)
 
 ## Guides
 
 - [Complete standalone model example](../../guides/standalone-model.md#minimal-model-entry)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/Path2-type.md

@@ -193,4 +193,4 @@ Returns a path sampled at equal arc lengths. Corners may be bridged; closure is
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/model/Path2Data.md

@@ -47,4 +47,4 @@ Whether traversal includes the last-to-first edge.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.