@metamesh/modeling 0.16.0 → 0.18.0

package/dist/docs/reference/geometry/InternalThreadCutterOptions.md

@@ -4,233 +4,201 @@ Options for a compensated internal-thread subtraction tool along +Z.
 
 ## Extends
 
-- `Omit`\<[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md), `"majorDiameter"`\>
+- `Omit`\<[`ThreadRidgeOptions`](ThreadRidgeOptions.md), `"majorDiameter"`\>
 - [`ThreadBevelOptions`](ThreadBevelOptions.md)
 
 ## Properties
 
-### ends?
-
-
+### fit?
 
-`readonly` `optional` **ends?**: [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md)
 
 
+`readonly` `optional` **fit?**: [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md)
 
-Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
-BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
-#### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`ends`](HelicalThreadRidgeMeshOptions.md#ends)
+Printable fit or caller-calibrated allowances. Default: `normal`.
 
 ***
 
-### handedness?
-
-
+### nominalMajorDiameter
 
-`readonly` `optional` **handedness?**: [`ThreadHandedness`](ThreadHandedness.md)
 
 
+`readonly` **nominalMajorDiameter**: `number`
 
-Helix direction. Default: `right`.
 
-#### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`handedness`](HelicalThreadRidgeMeshOptions.md#handedness)
+Nominal major diameter before female compensation and faceting correction.
 
 ***
 
-### length
+### bevel?
 
 
 
-`readonly` **length**: `number`
+`readonly` `optional` **bevel?**: [`Bevel`](Bevel.md)
 
 
 
-Total threaded axial length in millimetres.
+Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+or one sixth of the compensated male minor/female major radius for blunt ends.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`length`](HelicalThreadRidgeMeshOptions.md#length)
+[`ThreadBevelOptions`](ThreadBevelOptions.md).[`bevel`](ThreadBevelOptions.md#bevel)
 
 ***
 
-### limits?
+### ends?
 
 
 
-`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
+`readonly` `optional` **ends?**: [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md)
 
 
 
-Explicit output and circular allocation ceilings.
+Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
+BOSL2-style non-cut lead-in scaling is available on complete thread solids.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`limits`](HelicalThreadRidgeMeshOptions.md#limits)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`ends`](ThreadRidgeOptions.md#ends)
 
 ***
 
-### phase?
+### handedness?
 
 
 
-`readonly` `optional` **phase?**: `number`
+`readonly` `optional` **handedness?**: [`ThreadHandedness`](ThreadHandedness.md)
 
 
 
-Angular offset of the first start in degrees. Default: `0`.
+Helix direction. Default: `right`.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`phase`](HelicalThreadRidgeMeshOptions.md#phase)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`handedness`](ThreadRidgeOptions.md#handedness)
 
 ***
 
-### profile
+### length
 
 
 
-`readonly` **profile**: [`ThreadProfile`](ThreadProfile-type.md)
+`readonly` **length**: `number`
 
 
 
-Validated periodic profile repeated around the shaft.
+Total threaded axial length in millimetres.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`profile`](HelicalThreadRidgeMeshOptions.md#profile)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`length`](ThreadRidgeOptions.md#length)
 
 ***
 
-### resolution?
+### limits?
 
 
 
-`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
+`readonly` `optional` **limits?**: `Partial`\<[`ModelingLimits`](ModelingLimits.md)\>
 
 
 
-Optional circular-resolution policy.
+Explicit output and circular allocation ceilings.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`resolution`](HelicalThreadRidgeMeshOptions.md#resolution)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`limits`](ThreadRidgeOptions.md#limits)
 
 ***
 
-### starts?
+### phase?
 
 
 
-`readonly` `optional` **starts?**: `number`
+`readonly` `optional` **phase?**: `number`
 
 
 
-Number of evenly phased starts. Default: `1`.
+Angular offset of the first start in degrees. Default: `0`.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`starts`](HelicalThreadRidgeMeshOptions.md#starts)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`phase`](ThreadRidgeOptions.md#phase)
 
 ***
 
-### tolerance?
+### profile
 
 
 
-`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
+`readonly` **profile**: [`ThreadProfile`](ThreadProfile-type.md)
 
 
 
-Optional numerical tolerance overrides.
+Validated periodic profile repeated around the shaft.
 
 #### Inherited from
 
-[`HelicalThreadRidgeMeshOptions`](HelicalThreadRidgeMeshOptions.md).[`tolerance`](HelicalThreadRidgeMeshOptions.md#tolerance)
-
-***
-
-### fit?
-
-
-
-`readonly` `optional` **fit?**: [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md)
-
-
-
-Printable fit or caller-calibrated allowances. Default: `normal`.
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`profile`](ThreadRidgeOptions.md#profile)
 
 ***
 
-### nominalMajorDiameter
-
-
-
-`readonly` **nominalMajorDiameter**: `number`
-
-
-
-Nominal major diameter before female compensation and faceting correction.
-
-***
-
-### bevelBottom?
+### resolution?
 
 
 
-`readonly` `optional` **bevelBottom?**: `boolean`
+`readonly` `optional` **resolution?**: [`GeometryResolution`](GeometryResolution.md)
 
 
 
-Apply a 45-degree bevel at Z=0.
+Optional circular-resolution policy.
 
 #### Inherited from
 
-[`ThreadBevelOptions`](ThreadBevelOptions.md).[`bevelBottom`](ThreadBevelOptions.md#bevelbottom)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`resolution`](ThreadRidgeOptions.md#resolution)
 
 ***
 
-### bevelSize?
+### starts?
 
 
 
-`readonly` `optional` **bevelSize?**: `number`
+`readonly` `optional` **starts?**: `number`
 
 
 
-Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-male minor radius or female major radius; other ends default to the profile depth.
+Number of evenly phased starts. Default: `1`.
 
 #### Inherited from
 
-[`ThreadBevelOptions`](ThreadBevelOptions.md).[`bevelSize`](ThreadBevelOptions.md#bevelsize)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`starts`](ThreadRidgeOptions.md#starts)
 
 ***
 
-### bevelTop?
+### tolerance?
 
 
 
-`readonly` `optional` **bevelTop?**: `boolean`
+`readonly` `optional` **tolerance?**: [`GeometryToleranceOptions`](GeometryToleranceOptions.md)
 
 
 
-Apply a 45-degree bevel at Z=length.
+Optional numerical tolerance overrides.
 
 #### Inherited from
 
-[`ThreadBevelOptions`](ThreadBevelOptions.md).[`bevelTop`](ThreadBevelOptions.md#beveltop)
+[`ThreadRidgeOptions`](ThreadRidgeOptions.md).[`tolerance`](ThreadRidgeOptions.md#tolerance)
 
 
 ## Related APIs
 
+- [Bevel](Bevel.md)
 - [GeometryResolution](GeometryResolution.md)
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-- [HelicalThreadRidgeMeshOptions](HelicalThreadRidgeMeshOptions.md)
 - [ModelingLimits](ModelingLimits.md)
 - [PrintableThreadFit](PrintableThreadFit.md)
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
@@ -238,9 +206,10 @@ Apply a 45-degree bevel at Z=length.
 - [ThreadEndTreatmentOptions](ThreadEndTreatmentOptions.md)
 - [ThreadHandedness](ThreadHandedness.md)
 - [ThreadProfile](ThreadProfile-type.md)
+- [ThreadRidgeOptions](ThreadRidgeOptions.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/KnuckleHingeBaseSpec.md

@@ -79,4 +79,4 @@ Nonnegative total air gap between each neighboring pair of knuckle ends.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/KnuckleHingeDimensions.md

@@ -145,4 +145,4 @@ Origin at the joint center, direction +X, roll guide +Z.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/KnuckleHingeInterval.md

@@ -43,4 +43,4 @@ Axial length, excluding the neighboring gaps.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/KnuckleHingeSamplingOptions.md

@@ -48,4 +48,4 @@ Explicit allocation ceilings; defaults to the pure geometry sampling limits.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/KnuckleHingeSpec.md

@@ -19,4 +19,4 @@ Lift-off requires exactly two intervals; A's integral pin enters B without a far
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LineCurve2.md

@@ -47,4 +47,4 @@ Final XY point in millimetres.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LineCurve3.md

@@ -47,4 +47,4 @@ Final XYZ point in millimetres.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LinearPatternOptions.md

@@ -34,4 +34,4 @@ Direction of repetition; magnitude is ignored. Defaults to +X.
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LoftCorrespondence.md

@@ -21,4 +21,4 @@ correspondence must remain authoritative.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LoftMeshStation.md

@@ -28,4 +28,4 @@ Closed Path2 or ordered finite XY boundary points with an implicit closing edge.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LoftOptions.md

@@ -1,6 +1,6 @@
 # LoftOptions
 
-Shared controls for native and pure lofts. Point data and arbitrary Sections require explicit correspondence.
+Shared controls for native and pure lofts. Point data and arbitrary Sections default to direct correspondence.
 
 ## Properties
 
@@ -12,7 +12,7 @@ Shared controls for native and pure lofts. Point data and arbitrary Sections req
 
 
 
-One method or one per consecutive station gap. Omitted preserves known landmarks, including circle/ellipse-to-rectangle corners, or maps other unlike primitive seams directly.
+One method or one per consecutive station gap. Omitted preserves known primitive landmarks, including circle/ellipse-to-rectangle corners, and otherwise uses direct correspondence with the supplied seams.
 
 ***
 
@@ -85,4 +85,4 @@ Explicit output and sampling budgets; native operations may only lower host ceil
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/LoftPlacement.md

@@ -67,4 +67,4 @@ Excluded when an explicit spatial frame is supplied.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/METRIC_FASTENER_STANDARDS.md

@@ -19,4 +19,4 @@ responsibilities.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/MatchProfilesOptions.md

@@ -36,4 +36,4 @@ Explicit per-profile and circular ceilings; the family also has a one-million-sl
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/MetricFastenerSize.md

@@ -11,4 +11,4 @@ Supported metric fastener sizes.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/MetricFastenerStandard.md

@@ -73,4 +73,4 @@ Socket-head cap screw envelope and drive size.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/MetricHexNutDimensions.md

@@ -31,4 +31,4 @@ Nominal full-nut thickness.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/MetricSocketCapHeadDimensions.md

@@ -43,4 +43,4 @@ Nominal internal hex key size across flats.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/ModelingLimits.md

@@ -123,4 +123,4 @@ Maximum unique transferable output backing-buffer bytes.
 
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/NumericArray.md

@@ -0,0 +1,14 @@
+# NumericArray
+
+Numeric storage supported by immutable generation buffers.
+
+**NumericArray** = `Float32Array` \| `Float64Array` \| `Uint32Array` \| `Uint8Array` \| `Int32Array`
+
+
+
+
+## Guides
+
+- [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
+
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PRINTABLE_THREAD_FIT_POLICIES.md

@@ -18,4 +18,4 @@ calibrate them for its printer, material, layer height, and thread scale.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Path2-type.md

@@ -193,4 +193,4 @@ Returns a path sampled at equal arc lengths. Corners may be bridged; closure is
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Path2Data.md

@@ -47,4 +47,4 @@ Whether traversal includes the last-to-first edge.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Path2Input.md

@@ -17,4 +17,4 @@ A matching path value, complete plain path data, or a collection of vectors.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Path3-type.md

@@ -193,4 +193,4 @@ Returns a path sampled at equal arc lengths. Corners may be bridged; closure is
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Path3Data.md

@@ -47,4 +47,4 @@ Whether traversal includes the last-to-first edge.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Path3Input.md

@@ -17,4 +17,4 @@ A matching path value, complete plain path data, or a collection of vectors.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathFrame.md

@@ -47,4 +47,4 @@ Unit profile Y axis equal to tangent × normal.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathLocation.md

@@ -66,4 +66,4 @@ Clamped fraction along that edge, not the whole path's normalized arc length.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathNormalGuide.md

@@ -40,4 +40,4 @@ A finite guide vector that is not parallel to the local path tangent.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathOptions.md

@@ -35,4 +35,4 @@ Construction point ceiling; defaults to package sampling limits. Later sampling
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathPatternOptions.md

@@ -43,4 +43,4 @@ Preserve orientation, or align local +X for Sections / +Z for Solids to the tang
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathPlacement.md

@@ -35,4 +35,4 @@ Unit tangent of the path segment containing the placement.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PathResamplingOptions.md

@@ -81,4 +81,4 @@ Exact arc-length intervals; closed paths need at least three. Otherwise physical
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Pivot2Options.md

@@ -24,4 +24,4 @@ World-space point left fixed by rotation or scaling.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/Pivot3Options.md

@@ -24,4 +24,4 @@ World-space point left fixed by rotation or scaling.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PlanarMeshOptimizationFallbackReason.md

@@ -11,4 +11,4 @@ Stable reason why planar optimization returned the original mesh unchanged.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PlanarMeshOptimizationOptions.md

@@ -157,4 +157,4 @@ Numeric comparison overrides; model coordinates are interpreted in their existin
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PlanarMeshOptimizationResult.md

@@ -121,4 +121,4 @@ Number of triggered patches omitted because a configured triangle bound would be
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PlanarPatchQuality.md

@@ -191,4 +191,4 @@ Number of distinct indexed vertices referenced by this patch.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PolygonData.md

@@ -40,4 +40,4 @@ Counter-clockwise exterior boundary, omitting its duplicated closing point.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/PolylineResamplingOptions.md

@@ -93,4 +93,4 @@ Includes the closing edge without repeating the first output point; defaults to
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.