@metamesh/modeling 0.16.0 → 0.18.0

package/dist/docs/reference/geometry/preflightInternalThreadCutter.md

@@ -2,7 +2,7 @@
 
 Resolves compensated cutter dimensions and checks extended mesh estimates against output limits.
 
-**preflightInternalThreadCutter**(`options`: [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+**preflightInternalThreadCutter**(`options`: [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md)): [`ThreadSolidPreflight`](ThreadSolidPreflight.md)
 
 
 
@@ -11,12 +11,19 @@ host execution. It includes the cutter's one-pitch extension beyond each request
 creates planning data without mesh buffers or native objects. Row and triangle counts are
 estimates; mesh validity and native construction are checked later.
 
+See `mesh.preflightThreadSolid` for standalone mesh estimates.
+See `mesh.threadSolid` for standalone mesh construction.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`InternalThreadCutterOptions`](InternalThreadCutterOptions.md) · Required
 
+- [`nominalMajorDiameter`](InternalThreadCutterOptions.md#nominalmajordiameter) · `number` · Required
+
+  Nominal major diameter before female compensation and faceting correction.
+
 - [`length`](InternalThreadCutterOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
@@ -25,9 +32,14 @@ estimates; mesh validity and native construction are checked later.
 
   Validated periodic profile repeated around the shaft.
 
-- [`nominalMajorDiameter`](InternalThreadCutterOptions.md#nominalmajordiameter) · `number` · Required
+- [`fit`](InternalThreadCutterOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
 
-  Nominal major diameter before female compensation and faceting correction.
+  Printable fit or caller-calibrated allowances. Default: `normal`.
+
+- [`bevel`](InternalThreadCutterOptions.md#bevel) · [`Bevel`](Bevel.md) · Optional
+
+  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+  or one sixth of the compensated male minor/female major radius for blunt ends.
 
 - [`ends`](InternalThreadCutterOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
 
@@ -58,39 +70,20 @@ estimates; mesh validity and native construction are checked later.
 
   Optional numerical tolerance overrides.
 
-- [`fit`](InternalThreadCutterOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`bevelBottom`](InternalThreadCutterOptions.md#bevelbottom) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=0.
-
-- [`bevelSize`](InternalThreadCutterOptions.md#bevelsize) · `number` · Optional
-
-  Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-  male minor radius or female major radius; other ends default to the profile depth.
-
-- [`bevelTop`](InternalThreadCutterOptions.md#beveltop) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=length.
-
 
 
 ## Returns
 
-[`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+[`ThreadSolidPreflight`](ThreadSolidPreflight.md)
 
 
 ## Related APIs
 
-- [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
-- [helicalThreadSolidMesh](helicalThreadSolidMesh.md)
-- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
+- [ThreadSolidPreflight](ThreadSolidPreflight.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/preflightSvgRegion.md

@@ -8,8 +8,11 @@ Parses and validates bounded SVG input, constructing its normalized sampled regi
 
 This pure operation performs curve flattening, fill and stroke construction, and polygon union;
 it needs no browser or engine. Geometry counts measure the returned region at the selected
-resolution, rather than predicting later mesh allocation. The region may be empty; tiny-island
-and short-edge indicators do not establish manufacturability or later solid validity.
+resolution, rather than predicting later mesh allocation. With `fit`, painted bounds are
+uniformly centered inside the target and adaptive sampling remains in final millimetres.
+Refinement runs at most eight bounded import passes; exact circular counts retain precedence.
+Without `fit` the region may be empty. Tiny-island and short-edge indicators do not establish
+manufacturability or later solid validity.
 
 ## Parameters
 
@@ -27,6 +30,12 @@ Complete SVG XML source, limited to 256 KiB of UTF-8.
 
 Physical flattening and viewport-origin controls.
 
+- [`fit`](SvgImportOptions.md#fit) · [`Bounds2Input`](Bounds2Input.md) · Optional
+
+  Uniformly fit painted bounds inside this positioned XY target in millimetres.
+  Adaptive resolution describes the fitted size; exact circular counts retain precedence.
+  Empty painted geometry cannot be fitted. Omitted preserves the document's physical size.
+
 - [`limits`](SvgImportOptions.md#limits) · `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\> · Optional
 
   Explicit profile and circular allocation ceilings; bounded SVG source/work limits remain fixed.
@@ -66,4 +75,4 @@ The canonical normalized region plus bounded source, topology, and safe-repair f
 
 - [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/preflightThreadedNut.md

@@ -11,16 +11,14 @@ host execution. It resolves body/cutter dimensions without mesh buffers or nativ
 `thread` contains conservative cutter estimates, excluding the body and Boolean result.
 Successful preflight leaves mesh validity, native construction, and manufacturing fit to later checks.
 
+See `mesh.preflightThreadSolid` for standalone mesh estimates.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`ThreadedNutOptions`](ThreadedNutOptions.md) · Required
 
-- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
-
-  Validated periodic profile repeated around the shaft.
-
 - [`nominalMajorDiameter`](ThreadedNutOptions.md#nominalmajordiameter) · `number` · Required
 
   Nominal major diameter before female compensation and faceting correction.
@@ -37,6 +35,27 @@ Successful preflight leaves mesh validity, native construction, and manufacturin
 
   Across-flats width for hex/square or diameter for round, in millimetres.
 
+- [`profile`](ThreadedNutOptions.md#profile) · [`ThreadProfile`](ThreadProfile-type.md) · Required
+
+  Validated periodic profile repeated around the shaft.
+
+- [`fit`](ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
+
+  Printable fit or caller-calibrated allowances. Default: `normal`.
+
+- [`innerBevel`](ThreadedNutOptions.md#innerbevel) · [`Bevel`](Bevel.md) · Optional
+
+  Opening bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4); zero disables.
+
+- [`outerBevel`](ThreadedNutOptions.md#outerbevel) · [`Bevel`](Bevel.md) · Optional
+
+  Body bevels in [bottom, top] order. Omitted or auto uses min(profile.depth, thickness/4).
+  Use [0, "auto"] to keep the outside bottom flat without disabling its inner opening bevel.
+
+- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+
+  Optional physical policy for a round body, independent of the thread's matched facet grid.
+
 - [`ends`](ThreadedNutOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
 
   Optional bottom/top ridge-end treatments. Standalone ridges honor the requested boundaries;
@@ -66,26 +85,6 @@ Successful preflight leaves mesh validity, native construction, and manufacturin
 
   Optional numerical tolerance overrides.
 
-- [`fit`](ThreadedNutOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
-- [`bevel`](ThreadedNutOptions.md#bevel) · [`ThreadedNutBevel`](ThreadedNutBevel.md) · Optional
-
-  Nut body bevel selection. Default: `automatic`.
-
-- [`bodyResolution`](ThreadedNutOptions.md#bodyresolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
-
-  Optional physical policy for a round body, independent of the thread's matched facet grid.
-
-- [`chamferSize`](ThreadedNutOptions.md#chamfersize) · `number` · Optional
-
-  45-degree body chamfer extent. Default: `min(profile.depth, thickness/4)`.
-
-- [`flushBuildPlateBottom`](ThreadedNutOptions.md#flushbuildplatebottom) · `boolean` · Optional
-
-  Leave the bottom outside edge flat for build-plate adhesion. Default: `false`.
-
 
 
 ## Returns
@@ -97,10 +96,9 @@ Successful preflight leaves mesh validity, native construction, and manufacturin
 
 - [ThreadedNutOptions](ThreadedNutOptions.md)
 - [ThreadedNutPreflight](ThreadedNutPreflight.md)
-- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/preflightThreadedRod.md

@@ -2,7 +2,7 @@
 
 Resolves compensated rod dimensions and checks conservative mesh estimates against output limits.
 
-**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+**preflightThreadedRod**(`options`: [`ThreadedRodOptions`](ThreadedRodOptions.md)): [`ThreadSolidPreflight`](ThreadSolidPreflight.md)
 
 
 
@@ -10,12 +10,19 @@ This pure operation uses explicit resolution and limits or package defaults, wit
 host execution. It creates planning data without mesh buffers or native objects; returned row
 and triangle counts are estimates. Mesh validity and native construction are checked later.
 
+See `mesh.preflightThreadSolid` for standalone mesh estimates.
+See `mesh.threadSolid` for standalone mesh construction.
+
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`ThreadedRodOptions`](ThreadedRodOptions.md) · Required
 
+- [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
+
+  Nominal major diameter before male compensation.
+
 - [`length`](ThreadedRodOptions.md#length) · `number` · Required
 
   Total threaded axial length in millimetres.
@@ -24,9 +31,14 @@ and triangle counts are estimates. Mesh validity and native construction are che
 
   Validated periodic profile repeated around the shaft.
 
-- [`nominalMajorDiameter`](ThreadedRodOptions.md#nominalmajordiameter) · `number` · Required
+- [`bevel`](ThreadedRodOptions.md#bevel) · [`Bevel`](Bevel.md) · Optional
 
-  Nominal major diameter before male compensation.
+  Bottom/top sizes in millimetres. Omitted disables both. Auto uses profile depth for standard/tapered ends,
+  or one sixth of the compensated male minor/female major radius for blunt ends.
+
+- [`fit`](ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
+
+  Printable fit or caller-calibrated allowances. Default: `normal`.
 
 - [`ends`](ThreadedRodOptions.md#ends) · [`ThreadEndTreatmentOptions`](ThreadEndTreatmentOptions.md) · Optional
 
@@ -57,39 +69,20 @@ and triangle counts are estimates. Mesh validity and native construction are che
 
   Optional numerical tolerance overrides.
 
-- [`bevelBottom`](ThreadedRodOptions.md#bevelbottom) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=0.
-
-- [`bevelSize`](ThreadedRodOptions.md#bevelsize) · `number` · Optional
-
-  Axial bevel extent in millimetres. Active blunt ends default to one sixth of the compensated
-  male minor radius or female major radius; other ends default to the profile depth.
-
-- [`bevelTop`](ThreadedRodOptions.md#beveltop) · `boolean` · Optional
-
-  Apply a 45-degree bevel at Z=length.
-
-- [`fit`](ThreadedRodOptions.md#fit) · [`PrintableThreadFit`](PrintableThreadFit.md) \| [`PrintableThreadFitPolicy`](PrintableThreadFitPolicy.md) · Optional
-
-  Printable fit or caller-calibrated allowances. Default: `normal`.
-
 
 
 ## Returns
 
-[`HelicalThreadSolidMeshPreflight`](HelicalThreadSolidMeshPreflight.md)
+[`ThreadSolidPreflight`](ThreadSolidPreflight.md)
 
 
 ## Related APIs
 
-- [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
 - [ThreadedRodOptions](ThreadedRodOptions.md)
-- [helicalThreadSolidMesh](helicalThreadSolidMesh.md)
-- [preflightHelicalThreadSolidMesh](preflightHelicalThreadSolidMesh.md)
+- [ThreadSolidPreflight](ThreadSolidPreflight.md)
 
 ## Guides
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/projectOntoPlane3.md

@@ -34,4 +34,4 @@ Removes the component parallel to a normalized plane normal.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/radialPatternTransforms.md

@@ -28,4 +28,4 @@ readonly [`Transform3Data`](Transform3Data.md)[]
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rectangleContour.md

@@ -1,6 +1,6 @@
 # rectangleContour
 
-Creates an immutable sampled CCW rectangle boundary. Round radius zero is square; tangent saturated endpoints occur once.
+Creates an immutable sampled CCW rectangle boundary.
 
 **rectangleContour**(`options`: [`RectangleContourOptions`](RectangleContourOptions.md)): [`Contour`](Contour.md)
 
@@ -12,15 +12,13 @@ Creates an immutable sampled CCW rectangle boundary. Round radius zero is square
 rectangleContour({ size: [30, 20], treatment: { kind: "round", radius: 3 } });
 ```
 
-Use [rectangle](../model/rectangle.md) for a filled Section.
-
 ## Parameters
 
 <a id="options"></a>
 
 **`options`** · [`RectangleContourOptions`](RectangleContourOptions.md) · Required
 
-- [`size`](RectangleContourOptions.md#size) · `number` \| [`Vector2Data`](Vector2Data.md) · Required
+- [`size`](RectangleContourOptions.md#size) · `number` \| [`Vector2Input`](Vector2Input.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
@@ -42,6 +40,13 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 [`Contour`](Contour.md)
 
+## Remarks
+
+A zero round radius leaves square corners. When rounded corners meet, their shared endpoints
+appear once.
+
+Use [rectangle](../model/rectangle.md) for a filled Section.
+
 
 ## Related APIs
 
@@ -53,4 +58,4 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rectangleProfile.md

@@ -20,7 +20,7 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 **`options`** · [`RectangleProfileOptions`](RectangleProfileOptions.md) · Required
 
-- [`size`](RectangleProfileOptions.md#size) · `number` \| [`Vector2Data`](Vector2Data.md) · Required
+- [`size`](RectangleProfileOptions.md#size) · `number` \| [`Vector2Input`](Vector2Input.md) · Required
 
   Positive uniform size or explicit XY extents in millimetres.
 
@@ -58,4 +58,4 @@ Use [rectangle](../model/rectangle.md) for a filled Section.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/regionArea.md

@@ -35,4 +35,4 @@ Total filled area in square millimetres.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/regionBounds.md

@@ -28,4 +28,4 @@ Returns finite axis-aligned bounds for a non-empty region.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/regularPolygonContour.md

@@ -1,6 +1,6 @@
 # regularPolygonContour
 
-Creates a centered CCW point loop with vertex or face radial sizing and an implicit seam.
+Creates an immutable centered CCW point loop with vertex or face radial sizing and an implicit seam.
 
 `const` **regularPolygonContour**: (`options`: [`RegularPolygonContourOptions`](RegularPolygonContourOptions.md)) => readonly [`Vector2Data`](Vector2Data.md)[]
 
@@ -54,4 +54,4 @@ readonly [`Vector2Data`](Vector2Data.md)[]
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resamplePolyline2.md

@@ -65,4 +65,4 @@ Only final 2D output vectors are copied and frozen. No immutable 3D intermediate
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resamplePolyline3.md

@@ -68,4 +68,4 @@ may bridge original corners. Sampling never silently lowers the requested detail
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveAlignedCircularSegments.md

@@ -80,4 +80,4 @@ An aligned full-circle segment count.
 - [AlignedCircularSegmentsOptions](AlignedCircularSegmentsOptions.md)
 - [resolveCircularSegments](resolveCircularSegments.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveArcSegments.md

@@ -64,4 +64,4 @@ Segment count for the requested arc span.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [resolveCircularSegments](resolveCircularSegments.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCircularSampling.md

@@ -0,0 +1,40 @@
+# resolveCircularSampling
+
+Resolves circular sampling and its actual radial envelopes without allocating boundary points.
+
+**resolveCircularSampling**(`options`: [`CircleContourOptions`](CircleContourOptions.md)): [`CircularSampling`](CircularSampling.md)
+
+
+
+## Example: Check a nominal 8 mm face-sized bore
+
+```ts
+const bore = resolveCircularSampling({ diameter: 8, segments: 64, sizing: "face" });
+bore.faceRadius; // 4 mm
+bore.vertexRadius; // slightly larger than 4 mm
+```
+
+Vertex sizing retains the nominal vertex radius; face sizing retains the nominal face radius.
+Exact `segments` override resolution, while allocation ceilings still apply. Adaptive sampling
+uses the same count calculation as `resolveCircularSegments` and `circleContour` and rejects
+exhausted limits rather than coarsening. The returned record is immutable and needs no engine.
+
+## Parameters
+
+<a id="options"></a>
+
+**`options`** · [`CircleContourOptions`](CircleContourOptions.md) · Required
+
+
+
+## Returns
+
+[`CircularSampling`](CircularSampling.md)
+
+
+## Related APIs
+
+- [CircleContourOptions](CircleContourOptions.md)
+- [CircularSampling](CircularSampling.md)
+
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCircularSegments.md

@@ -59,4 +59,4 @@ Full-circle segment count.
 - [resolveAlignedCircularSegments](resolveAlignedCircularSegments.md)
 - [resolveArcSegments](resolveArcSegments.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCylindricalGear.md

@@ -32,4 +32,4 @@ currently supported.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveCylindricalGearPair.md

@@ -32,4 +32,4 @@ the same hand. The function validates those conjugate pitch invariants.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveExtrusionDivisions.md

@@ -75,4 +75,4 @@ Number of intermediate copies, excluding the two end profiles.
 
 - [Exact counts and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveGeometrySamplingLimits.md

@@ -27,4 +27,4 @@ Resolves finite positive safe-integer allocation ceilings without ambient state.
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveGeometryTolerance.md

@@ -56,4 +56,4 @@ A complete tolerance policy including the scale-resolved distance.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ResolvedGeometryTolerance](ResolvedGeometryTolerance.md)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveKnuckleHinge.md

@@ -56,4 +56,4 @@ Manufacturing minima, strength, mounting, retention, handedness, and motion rema
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolvePrintableThreadFitPolicy.md

@@ -28,4 +28,4 @@ Resolves and validates a named or caller-defined print-fit policy.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveRackPitch.md

@@ -28,4 +28,4 @@ Resolves a rack segment that is conjugate with the same normal cylindrical pitch
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/resolveThreadCircularSegments.md

@@ -60,4 +60,4 @@ raised. Adaptive policies align upward and fail if that would exceed `maxSegment
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rotate2.md

@@ -34,4 +34,4 @@ Rotates a finite vector counter-clockwise in XY by `degrees` about the origin. T
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/rotationTransform3.md

@@ -51,4 +51,4 @@ A frozen row-major transform.
 - [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
 - [Fluent values and tuple kernels](../../guides/concepts.md#choose-fluent-values-or-standalone-algorithms)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/roundClosedPolylinePath.md

@@ -53,4 +53,4 @@ readonly [`Vector3Data`](Vector3Data.md)[]
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleContour.md

@@ -84,4 +84,4 @@ Frozen counterclockwise loop in millimetres, without a repeated seam endpoint.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleCurve2.md

@@ -61,4 +61,4 @@ Returned planar points and tangents are copied and frozen. At stationary tangent
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleCurve3.md

@@ -62,4 +62,4 @@ bound the full control hull. Full-circle arcs repeat their endpoint; closed poly
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleCylindricalGearOutline.md

@@ -59,4 +59,4 @@ seam point, and contains no holes. Its center is the origin and its axis is
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleHelix.md

@@ -46,4 +46,4 @@ readonly [`Vector3Data`](Vector3Data.md)[]
 
 - [Path queries and closure-preserving interchange](../../guides/concepts.md#query-paths-and-preserve-closure)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleInternalCylindricalGearSpaceOutline.md

@@ -60,4 +60,4 @@ when used as a region hole.
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleRackToothPath.md

@@ -40,4 +40,4 @@ readonly [`Vector2Data`](Vector2Data.md)[]
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleSideProfile.md

@@ -80,4 +80,4 @@ Frozen open polyline in millimetres, ordered from lowest to highest anchor.
 
 - [Choose a geometry representation](../../guides/concepts.md#geometry-vocabulary)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleTextContours.md

@@ -54,4 +54,4 @@ Frozen contours with original glyph winding and no repeated closing vertex.
 
 - [SVG preflight work and guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.

package/dist/docs/reference/geometry/sampleThreadHelices.md

@@ -64,4 +64,4 @@ Samples evenly phased thread helices with finite `lead = pitch * starts`. All st
 
 - [Conservative estimates and preflight guarantees](../../guides/concepts.md#check-preflight-guarantees)
 
-Package: `@metamesh/modeling@0.16.0`.
+Package: `@metamesh/modeling@0.18.0`.