npm - @metamesh/modeling - Versions diffs - 0.13.0 → 0.14.0 - Mend

@metamesh/modeling 0.13.0 → 0.14.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (654) hide show

package/dist/docs/reference/geometry/RadialPatternOptions.md CHANGED Viewed

@@ -20,7 +20,7 @@ Number of solids to return, including the original.
-`readonly` **axis**: [`Vector3`](Vector3.md)
+`readonly` **axis**: [`Vector3Tuple`](Vector3Tuple.md)
@@ -44,7 +44,7 @@ Signed rotation from one copy to the next, in degrees.
-`readonly` `optional` **center?**: [`Vector3`](Vector3.md)
+`readonly` `optional` **center?**: [`Vector3Tuple`](Vector3Tuple.md)
@@ -53,10 +53,10 @@ Rotation center in world coordinates. Defaults to the origin.
 ## Related APIs
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 ## Guides
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RadialSizing.md CHANGED Viewed

@@ -4,4 +4,4 @@ Radial dimensions refer to polygon vertices or compensate faceting to meet polyg
 **RadialSizing** = `"vertex"` \| `"face"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RadialSizingOptions.md CHANGED Viewed

@@ -37,4 +37,4 @@ Vertex sizing is inscribed; face sizing circumscribes the nominal radius. Defaul
 - [RadialSizing](RadialSizing.md)
 - [RegularPolygonContourOptions](RegularPolygonContourOptions.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RectangleContourOptions.md CHANGED Viewed

@@ -12,7 +12,7 @@ Shared rectangle dimensions, origin and uniform or per-corner treatment.
-`readonly` **size**: `number` \| [`Vector2`](Vector2.md)
+`readonly` **size**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
@@ -61,6 +61,6 @@ Explicit sampling ceiling for the complete output profile.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [RectangleCornerTreatments](RectangleCornerTreatments.md)
 - [RectangleProfileOptions](RectangleProfileOptions.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RectangleCornerTreatment.md CHANGED Viewed

@@ -31,4 +31,4 @@ Leaves this corner untreated.
 - [EdgeTreatment](EdgeTreatment.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RectangleCornerTreatments.md CHANGED Viewed

@@ -11,4 +11,4 @@ Corner treatments ordered top-right, top-left, bottom-left, bottom-right.
 - [RectangleCornerTreatment](RectangleCornerTreatment.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RectangleProfileOptions.md CHANGED Viewed

@@ -12,7 +12,7 @@ Shared rectangle options with an identified component for explicit profile famil
-`readonly` **size**: `number` \| [`Vector2`](Vector2.md)
+`readonly` **size**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
@@ -89,6 +89,6 @@ Canonical component identity of at most 64 characters. Defaults to body.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [RectangleContourOptions](RectangleContourOptions.md)
 - [RectangleCornerTreatments](RectangleCornerTreatments.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RegionData.md ADDED Viewed

@@ -0,0 +1,14 @@
+# RegionData
+A two-dimensional region represented by disjoint filled polygons.
+**RegionData** = readonly [`PolygonData`](PolygonData.md)[]
+## Related APIs
+- [PolygonData](PolygonData.md)
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RegularPolygonContourOptions.md CHANGED Viewed

@@ -81,4 +81,4 @@ Counterclockwise rotation in degrees; defaults to zero with a vertex on +X.
 - [RadialSizing](RadialSizing.md)
 - [RadialSizingOptions](RadialSizingOptions.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ResolvedGeometryTolerance.md CHANGED Viewed

@@ -62,4 +62,4 @@ Effective distance threshold for the supplied model scale.
 Configured dimensionless scale multiplier.
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RevolveOptions.md CHANGED Viewed

@@ -79,4 +79,4 @@ Explicit output and sampling allocation ceilings.
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RoundedEdgeTreatment.md CHANGED Viewed

@@ -88,4 +88,4 @@ Nonnegative millimetre radius; zero leaves the edge or corner untreated. Positiv
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/RowLayoutOptions.md CHANGED Viewed

@@ -20,4 +20,4 @@ Nonnegative millimetre gap between adjacent X bounds. Defaults to zero.
 - [Text from a Font parameter](../../guides/recipes.md#text-from-a-font-parameter)
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SampleContourOptions.md CHANGED Viewed

@@ -68,4 +68,4 @@ Selected profile and per-segment path ceilings; omitted values use package defau
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SampleHelixOptions.md CHANGED Viewed

@@ -92,4 +92,4 @@ and normalized, so the final endpoint is always exactly `height`.
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SampleSideProfileOptions.md CHANGED Viewed

@@ -68,4 +68,4 @@ Explicit profile and circular allocation ceilings.
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SampledCurve2.md CHANGED Viewed

@@ -8,7 +8,7 @@ Immutable planar points and corresponding directed unit tangents.
-`readonly` **points**: readonly [`Vector2`](Vector2.md)[]
+`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
@@ -20,7 +20,7 @@ Curves retain both endpoints, including full-circle seams; closed resampling omi
-`readonly` **tangents**: readonly [`Vector2`](Vector2.md)[]
+`readonly` **tangents**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
@@ -29,6 +29,6 @@ Directed unit vectors; stationary derivatives use the nearest usable direction.
 ## Related APIs
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SampledCurve3.md CHANGED Viewed

@@ -8,7 +8,7 @@ Immutable spatial points and corresponding directed unit tangents.
-`readonly` **points**: readonly [`Vector3`](Vector3.md)[]
+`readonly` **points**: readonly [`Vector3Tuple`](Vector3Tuple.md)[]
@@ -20,7 +20,7 @@ Curves retain both endpoints, including full-circle seams; closed resampling omi
-`readonly` **tangents**: readonly [`Vector3`](Vector3.md)[]
+`readonly` **tangents**: readonly [`Vector3Tuple`](Vector3Tuple.md)[]
@@ -29,6 +29,6 @@ Directed unit vectors; stationary derivatives use the nearest usable direction.
 ## Related APIs
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SampledThreadHelices.md CHANGED Viewed

@@ -55,4 +55,4 @@ Number of revolutions represented by each path.
 - [Path3](Path3.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SideProfileCurve.md CHANGED Viewed

@@ -32,4 +32,4 @@ Ordered chain of 1–31 straight or cubic segments.
 - [SideProfilePoint](SideProfilePoint.md)
 - [SideProfileSegment](SideProfileSegment.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SideProfilePoint.md CHANGED Viewed

@@ -26,4 +26,4 @@ Nonnegative distance from the revolution axis.
 Upward axial coordinate; anchors progress strictly upward.
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SideProfileSegment.md CHANGED Viewed

@@ -83,4 +83,4 @@ Next strictly higher anchor.
 - [SideProfilePoint](SideProfilePoint.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SmoothEdgeTreatment.md CHANGED Viewed

@@ -68,4 +68,4 @@ Explicit sampling ceilings, bounded by the host policy.
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SolidMeshValidationOptions.md CHANGED Viewed

@@ -31,4 +31,4 @@ Distance comparison policy in millimetres; near contacts reject conservatively.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SphereOptions.md CHANGED Viewed

@@ -12,4 +12,4 @@ Exactly one radius or diameter, placement, and tessellation for an origin-center
 - [CircularPrimitiveOptions](CircularPrimitiveOptions.md)
 - [PrimitivePlacement](PrimitivePlacement.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SquareThreadProfileSpec.md CHANGED Viewed

@@ -72,4 +72,4 @@ Optional numerical tolerance overrides.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/StrokePathCap.md CHANGED Viewed

@@ -4,4 +4,4 @@ End-cap treatment for an open stroked path.
 **StrokePathCap** = `"butt"` \| `"round"` \| `"square"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/StrokePathJoin.md CHANGED Viewed

@@ -4,4 +4,4 @@ Join treatment where adjacent stroked path segments meet.
 **StrokePathJoin** = `"bevel"` \| `"miter"` \| `"round"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/StrokePathRegionOptions.md CHANGED Viewed

@@ -1,6 +1,6 @@
 # StrokePathRegionOptions
-Physical stroke and topology controls for strokePathRegion.
+Physical stroke and topology controls shared by pure regions and native Sections.
 ## Properties
@@ -82,4 +82,4 @@ Positive total stroke width in millimetres, centered on the sampled path.
 - [StrokePathCap](StrokePathCap.md)
 - [StrokePathJoin](StrokePathJoin.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SvgImportOptions.md CHANGED Viewed

@@ -57,4 +57,4 @@ lower-left corner at the origin. Default: `"center"`.
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SvgRegionPreflight.md CHANGED Viewed

@@ -32,7 +32,7 @@ Appearance-preserving cleanup observed during parsing and normalization.
-`readonly` **region**: [`Region`](Region.md)
+`readonly` **region**: [`RegionData`](RegionData.md)
@@ -53,9 +53,9 @@ Bounded source and flattening complexity measurements.
 ## Related APIs
-- [Region](Region.md)
+- [RegionData](RegionData.md)
 - [SvgRegionPreflightGeometryMetrics](SvgRegionPreflightGeometryMetrics.md)
 - [SvgRegionPreflightRepairs](SvgRegionPreflightRepairs.md)
 - [SvgRegionPreflightSourceMetrics](SvgRegionPreflightSourceMetrics.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SvgRegionPreflightGeometryMetrics.md CHANGED Viewed

@@ -115,4 +115,4 @@ Non-duplicated boundary vertices in the final normalized region.
 - [Bounds2](Bounds2.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SvgRegionPreflightRepairs.md CHANGED Viewed

@@ -62,4 +62,4 @@ Consecutive repeated flattened vertices discarded before topology resolution.
 Explicit repeated seam vertices removed from otherwise closed contours.
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SvgRegionPreflightSourceMetrics.md CHANGED Viewed

@@ -50,4 +50,4 @@ Flattened vertices emitted before fill, stroke, and clipping operations.
 Path endpoints and control vertices parsed before adaptive flattening.
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SweepOptions.md CHANGED Viewed

@@ -80,7 +80,7 @@ Twist advances by physical path length (default), or normalized authored station
-`readonly` `optional` **scale?**: `number` \| [`Vector2`](Vector2.md) \| readonly [`Vector2`](Vector2.md)[]
+`readonly` `optional` **scale?**: `number` \| [`Vector2Tuple`](Vector2Tuple.md) \| readonly [`Vector2Tuple`](Vector2Tuple.md)[]
@@ -104,6 +104,6 @@ Corresponding point-index advance at a rotationally equivalent closed seam.
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
 - [SweepOrientation](SweepOrientation.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/SweepOrientation.md CHANGED Viewed

@@ -2,7 +2,7 @@
 Explicit profile-X frame policy; all normals are directed, and selected singular policies reject.
-**SweepOrientation** = \{ `kind`: `"transport"`; `initialNormal?`: [`Vector3`](Vector3.md); \} \| \{ `kind`: `"fixed-normal"`; `normal`: [`Vector3`](Vector3.md); \} \| \{ `kind`: `"guide"`; `normal`: [`PathNormalGuide`](PathNormalGuide.md); \} \| \{ `kind`: `"frenet"`; \}
+**SweepOrientation** = \{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Tuple`](Vector3Tuple.md); \} \| \{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Tuple`](Vector3Tuple.md); \} \| \{ `kind`: `"guide"`; `normal`: [`PathNormalGuide`](PathNormalGuide.md); \} \| \{ `kind`: `"frenet"`; \}
@@ -10,7 +10,7 @@ Explicit profile-X frame policy; all normals are directed, and selected singular
 ### Type Literal
-\{ `kind`: `"transport"`; `initialNormal?`: [`Vector3`](Vector3.md); \}
+\{ `kind`: `"transport"`; `initialNormal?`: [`Vector3Tuple`](Vector3Tuple.md); \}
 #### kind
@@ -26,7 +26,7 @@ Minimizes frame rotation by parallel transport.
-`readonly` `optional` **initialNormal?**: [`Vector3`](Vector3.md)
+`readonly` `optional` **initialNormal?**: [`Vector3Tuple`](Vector3Tuple.md)
@@ -36,7 +36,7 @@ Initial profile +X guide, projected perpendicular to the first tangent.
 ### Type Literal
-\{ `kind`: `"fixed-normal"`; `normal`: [`Vector3`](Vector3.md); \}
+\{ `kind`: `"fixed-normal"`; `normal`: [`Vector3Tuple`](Vector3Tuple.md); \}
 #### kind
@@ -52,7 +52,7 @@ Projects one fixed world-space normal at every path station.
-`readonly` **normal**: [`Vector3`](Vector3.md)
+`readonly` **normal**: [`Vector3Tuple`](Vector3Tuple.md)
@@ -104,6 +104,6 @@ Uses sampled curvature normals; zero-curvature stations reject.
 ## Related APIs
 - [PathNormalGuide](PathNormalGuide.md)
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadBevelOptions.md CHANGED Viewed

@@ -50,4 +50,4 @@ Apply a 45-degree bevel at Z=length.
 - [InternalThreadCutterOptions](InternalThreadCutterOptions.md)
 - [ThreadedRodOptions](ThreadedRodOptions.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadCircularSegmentsOptions.md CHANGED Viewed

@@ -97,4 +97,4 @@ Number of phased starts. Default: `1`.
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
 - [ThreadProfile](ThreadProfile.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadCompensationOptions.md CHANGED Viewed

@@ -70,4 +70,4 @@ Optional numerical tolerance overrides.
 - [PrintableThreadFitPolicy](PrintableThreadFitPolicy.md)
 - [ThreadRole](ThreadRole.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadEndStyle.md CHANGED Viewed

@@ -4,4 +4,4 @@ End shape of a generated helical ridge.
 **ThreadEndStyle** = `"blunt"` \| `"standard"` \| `"tapered"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadEndTreatmentOptions.md CHANGED Viewed

@@ -110,4 +110,4 @@ clips the periodic profile at the face, and `tapered` ramps into the minor envel
 - [ThreadLeadInEnvelope](ThreadLeadInEnvelope.md)
 - [ThreadLeadInShape](ThreadLeadInShape.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadHandedness.md CHANGED Viewed

@@ -4,4 +4,4 @@ Direction in which a conventional helical thread advances around +Z.
 **ThreadHandedness** = `"left"` \| `"right"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadHelixOptions.md CHANGED Viewed

@@ -117,4 +117,4 @@ Optional numerical tolerance overrides.
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadHandedness](ThreadHandedness.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadLeadInEnvelope.md CHANGED Viewed

@@ -4,4 +4,4 @@ Radial envelope toward which a blunt lead-in collapses.
 **ThreadLeadInEnvelope** = `"major"` \| `"minor"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadLeadInShape.md CHANGED Viewed

@@ -4,4 +4,4 @@ BOSL2-compatible cross-section scaling curve for a blunt thread lead-in.
 **ThreadLeadInShape** = `"cut"` \| `"linear"` \| `"smooth"` \| `"sqrt"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadProfile.md CHANGED Viewed

@@ -56,7 +56,7 @@ Adjacent axial thread spacing in millimetres.
-`readonly` **points**: readonly [`Vector2`](Vector2.md)[]
+`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
@@ -77,6 +77,6 @@ Axial width of the flat at the minor envelope.
 ## Related APIs
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadProfileBaseSpec.md CHANGED Viewed

@@ -46,4 +46,4 @@ Optional numerical tolerance overrides.
 - [TrapezoidalThreadProfileSpec](TrapezoidalThreadProfileSpec.md)
 - [TriangularThreadProfileSpec](TriangularThreadProfileSpec.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadProfileSpec.md CHANGED Viewed

@@ -16,4 +16,4 @@ Supported built-in and caller-defined thread profiles.
 - [TrapezoidalThreadProfileSpec](TrapezoidalThreadProfileSpec.md)
 - [TriangularThreadProfileSpec](TriangularThreadProfileSpec.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadRole.md CHANGED Viewed

@@ -4,4 +4,4 @@ Whether compensation is being applied to an external or internal thread.
 **ThreadRole** = `"male"` \| `"female"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadedNutBevel.md CHANGED Viewed

@@ -4,4 +4,4 @@ Nut-edge bevel selection.
 **ThreadedNutBevel** = `"automatic"` \| `"both"` \| `"inside"` \| `"none"` \| `"outside"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadedNutOptions.md CHANGED Viewed

@@ -266,4 +266,4 @@ Across-flats width for hex/square or diameter for round, in millimetres.
 - [ThreadHandedness](ThreadHandedness.md)
 - [ThreadProfile](ThreadProfile.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadedNutPreflight.md CHANGED Viewed

@@ -91,4 +91,4 @@ Start-aligned circular facet count used by the compensated thread cutter.
 - [HelicalThreadSolidMeshPreflight](HelicalThreadSolidMeshPreflight.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadedNutShape.md CHANGED Viewed

@@ -4,4 +4,4 @@ Supported printable nut body shapes.
 **ThreadedNutShape** = `"hex"` \| `"round"` \| `"square"`
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ThreadedRodOptions.md CHANGED Viewed

@@ -239,4 +239,4 @@ Nominal major diameter before male compensation.
 - [ThreadHandedness](ThreadHandedness.md)
 - [ThreadProfile](ThreadProfile.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/TorusOptions.md CHANGED Viewed

@@ -102,4 +102,4 @@ Operation-level physical tessellation policy over the active model-wide policy.
 - [PrimitivePlacement](PrimitivePlacement.md)
 - [PrimitivePlacementOptions](PrimitivePlacementOptions.md)
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.