@metamesh/modeling 0.13.0 → 0.14.0

package/dist/docs/reference/geometry/ClearanceHoleFit.md

@@ -4,4 +4,4 @@ Common clearance-hole fit categories, ordered from smallest to largest.
 
 **ClearanceHoleFit** = `"close"` \| `"normal"` \| `"loose"`
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ClosestPointOnPathOptions.md

@@ -0,0 +1,34 @@
+# ClosestPointOnPathOptions
+
+Topology and work ceiling for a closest-point query on a sampled path.
+
+## Properties
+
+### closed?
+
+
+
+`readonly` `optional` **closed?**: `boolean`
+
+
+
+Include the last-to-first edge without duplicating the seam point. Defaults to false.
+
+***
+
+### limits?
+
+
+
+`readonly` `optional` **limits?**: `Partial`\<[`GeometrySamplingLimits`](GeometrySamplingLimits.md)\>
+
+
+
+Explicit path point ceiling; defaults to the package sampling limits.
+
+
+## Related APIs
+
+- [GeometrySamplingLimits](GeometrySamplingLimits.md)
+
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ClosestPointOnPathResult.md

@@ -0,0 +1,65 @@
+# ClosestPointOnPathResult
+
+Closest position on a sampled path, measured in millimetres.
+
+## Type Parameters
+
+### Point
+
+`Point` *extends* [`Vector2Tuple`](Vector2Tuple.md) \| [`Vector3Tuple`](Vector3Tuple.md)
+
+## Properties
+
+### point
+
+
+
+`readonly` **point**: `Point`
+
+
+
+Copied position on the selected edge.
+
+***
+
+### distance
+
+
+
+`readonly` **distance**: `number`
+
+
+
+Euclidean distance from the query point to the path.
+
+***
+
+### edgeIndex
+
+
+
+`readonly` **edgeIndex**: `number`
+
+
+
+Zero-based starting vertex of the selected edge. Equal distances keep the first edge.
+
+***
+
+### fraction
+
+
+
+`readonly` **fraction**: `number`
+
+
+
+Clamped interpolation fraction from the edge's start to its end.
+
+
+## Related APIs
+
+- [Vector2Tuple](Vector2Tuple.md)
+- [Vector3Tuple](Vector3Tuple.md)
+
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CompensatedThreadDiameters.md

@@ -50,4 +50,4 @@ Compensated minor diameter in millimetres.
 
 Signed radial shift: negative for male inset, positive for female outset.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/Contour.md

@@ -2,7 +2,7 @@
 
 A closed two-dimensional boundary whose first point is not repeated at the end.
 
-**Contour** = readonly [`Vector2`](Vector2.md)[]
+**Contour** = readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 
 
 
@@ -12,6 +12,6 @@ may reject duplicate adjacent points or fewer than three effective vertices.
 
 ## Related APIs
 
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ContourCurve.md

@@ -32,4 +32,4 @@ Ordered chain of 2–32 segments; the final end must exactly match start.
 - [ContourPoint](ContourPoint.md)
 - [ContourSegment](ContourSegment.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ContourPoint.md

@@ -26,4 +26,4 @@ Horizontal coordinate; physical scaling does not center the contour.
 
 Upward planar coordinate.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ContourSegment.md

@@ -83,4 +83,4 @@ Next anchor; the final anchor repeats the curve start.
 
 - [ContourPoint](ContourPoint.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CorrespondingComponent.md

@@ -43,4 +43,4 @@ Clockwise hole contours belonging to this component.
 
 - [CorrespondingContour](CorrespondingContour.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CorrespondingContour.md

@@ -43,4 +43,4 @@ One span identity per point; indices correspond between every matched family mem
 
 - [Contour](Contour.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CorrespondingProfile.md

@@ -19,4 +19,4 @@ Ordered components with explicit contour identities.
 
 - [CorrespondingComponent](CorrespondingComponent.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CorrespondingProfileStation.md

@@ -24,4 +24,4 @@ Already corresponding filled contours with authoritative landmark slots.
 - [CorrespondingProfile](CorrespondingProfile.md)
 - [LoftPlacement](LoftPlacement.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CubicBezierCurve2.md

@@ -20,7 +20,7 @@ Selects a cubic Bézier through two endpoints and two controls.
 
 
 
-`readonly` **start**: [`Vector2`](Vector2.md)
+`readonly` **start**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -32,7 +32,7 @@ Initial XY point in millimetres.
 
 
 
-`readonly` **control1**: [`Vector2`](Vector2.md)
+`readonly` **control1**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -44,7 +44,7 @@ First XY control point in millimetres.
 
 
 
-`readonly` **control2**: [`Vector2`](Vector2.md)
+`readonly` **control2**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -56,7 +56,7 @@ Second XY control point in millimetres.
 
 
 
-`readonly` **end**: [`Vector2`](Vector2.md)
+`readonly` **end**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -65,6 +65,6 @@ Final XY point in millimetres.
 
 ## Related APIs
 
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CubicBezierCurve3.md

@@ -20,7 +20,7 @@ Selects a cubic Bézier through two endpoints and two controls.
 
 
 
-`readonly` **start**: [`Vector3`](Vector3.md)
+`readonly` **start**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -32,7 +32,7 @@ Initial XYZ point in millimetres.
 
 
 
-`readonly` **control1**: [`Vector3`](Vector3.md)
+`readonly` **control1**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -44,7 +44,7 @@ First XYZ control point in millimetres.
 
 
 
-`readonly` **control2**: [`Vector3`](Vector3.md)
+`readonly` **control2**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -56,7 +56,7 @@ Second XYZ control point in millimetres.
 
 
 
-`readonly` **end**: [`Vector3`](Vector3.md)
+`readonly` **end**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -65,6 +65,6 @@ Final XYZ point in millimetres.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/Curve2.md

@@ -13,4 +13,4 @@ Reusable planar curve definition.
 - [CubicBezierCurve2](CubicBezierCurve2.md)
 - [LineCurve2](LineCurve2.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/Curve3.md

@@ -13,4 +13,4 @@ Reusable spatial curve definition.
 - [CubicBezierCurve3](CubicBezierCurve3.md)
 - [LineCurve3](LineCurve3.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CurveSamplingOptions.md

@@ -61,4 +61,4 @@ Explicit sampling ceilings; omitted values use package defaults without ambient
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 - [PolylineResamplingOptions](PolylineResamplingOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CustomThreadProfileSpec.md

@@ -24,7 +24,7 @@ Selects a caller-defined periodic profile.
 
 
 
-`readonly` **points**: readonly [`Vector2`](Vector2.md)[]
+`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 
 
 
@@ -68,6 +68,6 @@ Optional numerical tolerance overrides.
 
 - [GeometryToleranceOptions](GeometryToleranceOptions.md)
 - [ThreadProfileBaseSpec](ThreadProfileBaseSpec.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylinderAnchorFace.md

@@ -4,4 +4,11 @@ Named face on a cylinder parallel to +Z.
 
 **CylinderAnchorFace** = `"bottom"` \| `"side"` \| `"top"`
 
-Package: `@metamesh/modeling@0.13.0`.
+
+
+
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylinderAnchorOptions.md

@@ -68,7 +68,7 @@ Centers the cylinder along Z; defaults to true, matching cylinder().
 
 
 
-`readonly` `optional` **origin?**: [`Vector3`](Vector3.md)
+`readonly` `optional` **origin?**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -78,6 +78,10 @@ Construction origin; centered-axis midpoint or noncentered bottom axis. Defaults
 ## Related APIs
 
 - [CylinderAnchorFace](CylinderAnchorFace.md)
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+## Guides
+
+- [Reusable transforms and vector math](../../guides/concepts.md#reuse-a-transform-across-shapes-and-coordinates)
+
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylinderOptions.md

@@ -50,4 +50,4 @@ Total height along +Z in millimetres.
 - [PrimitivePlacement](PrimitivePlacement.md)
 - [RadialSizingOptions](RadialSizingOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearDimensions.md

@@ -206,4 +206,4 @@ Pressure angle measured in the transverse pitch plane, in radians.
 
 Helical equivalent spur tooth count, `toothCount / cos³(helixAngle)`.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearMeshKind.md

@@ -4,4 +4,4 @@ Whether two cylindrical gears mesh on their outside teeth or as a pinion inside
 
 **CylindricalGearMeshKind** = `"external"` \| `"internal"`
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearOutlineOptions.md

@@ -68,4 +68,4 @@ Exact samples along each tooth tip, at least one, within selected circular/profi
 - [GeometryResolution](GeometryResolution.md)
 - [GeometrySamplingLimits](GeometrySamplingLimits.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearPairDimensions.md

@@ -79,4 +79,4 @@ Helix angle required on the driven member for conjugate teeth, in degrees.
 
 - [CylindricalGearDimensions](CylindricalGearDimensions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearPairMotionOptions.md

@@ -31,4 +31,4 @@ Coupled poses sampled over one driver tooth pitch. Defaults to 24.
 
 - [CylindricalGearOutlineOptions](CylindricalGearOutlineOptions.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearPairMotionReport.md

@@ -38,4 +38,4 @@ Maximum pinion area lying inside ring material, in square millimetres.
 
 Number of evenly spaced coupled poses inspected.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearPairSpec.md

@@ -44,4 +44,4 @@ External/external or external/internal mesh.
 - [CylindricalGearMeshKind](CylindricalGearMeshKind.md)
 - [CylindricalGearSpec](CylindricalGearSpec.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/CylindricalGearSpec.md

@@ -79,4 +79,4 @@ Normal pressure angle in degrees; defaults to 20 degrees.
 
 Integer tooth count from 6 through 1,000; external profiles also enforce the no-undercut limit.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/DEFAULT_GEOMETRY_TOLERANCE.md

@@ -4,4 +4,4 @@ Default absolute, relative, and angular tolerances for millimetre-scale models.
 
 `const` **DEFAULT\_GEOMETRY\_TOLERANCE**: `Readonly`\<\{ `absolute`: `1e-9`; `angular`: `1e-10`; `relative`: `1e-12`; \}\>
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/EdgeTreatment.md

@@ -14,4 +14,4 @@ Uniform finishing vocabulary shared by applicable solid edges and profile corner
 - [RoundedEdgeTreatment](RoundedEdgeTreatment.md)
 - [SmoothEdgeTreatment](SmoothEdgeTreatment.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/EllipseContourOptions.md

@@ -2,7 +2,7 @@
 
 Ellipse dimensions with exactly one XY radii or full-size tuple and explicit sampling.
 
-**EllipseContourOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & (\{ `radius`: [`Vector2`](Vector2.md); `size?`: `never`; \} \| \{ `size`: [`Vector2`](Vector2.md); `radius?`: `never`; \})
+**EllipseContourOptions** = [`CircularPrimitiveOptions`](CircularPrimitiveOptions.md) & (\{ `radius`: [`Vector2Tuple`](Vector2Tuple.md); `size?`: `never`; \} \| \{ `size`: [`Vector2Tuple`](Vector2Tuple.md); `radius?`: `never`; \})
 
 
 
@@ -10,6 +10,6 @@ Ellipse dimensions with exactly one XY radii or full-size tuple and explicit sam
 ## Related APIs
 
 - [CircularPrimitiveOptions](CircularPrimitiveOptions.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/EndTreatments.md

@@ -31,4 +31,4 @@ Top cap and adjoining side; omitted leaves the end untreated.
 
 - [EdgeTreatment](EdgeTreatment.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ExtrudeOptions.md

@@ -96,7 +96,7 @@ Operation-level physical policy over the nearest model scope.
 
 
 
-`readonly` `optional` **scaleTop?**: `number` \| [`Vector2`](Vector2.md)
+`readonly` `optional` **scaleTop?**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -129,6 +129,6 @@ Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 - [ExtrusionSamplingOptions](ExtrusionSamplingOptions.md)
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/ExtrusionSamplingOptions.md

@@ -48,7 +48,7 @@ Operation-level physical policy over the nearest model scope.
 
 
 
-`readonly` `optional` **scaleTop?**: `number` \| [`Vector2`](Vector2.md)
+`readonly` `optional` **scaleTop?**: `number` \| [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -72,6 +72,6 @@ Finite rotation of the top profile about +Z, in degrees; defaults to zero.
 - [ExtrudeOptions](ExtrudeOptions.md)
 - [GeometryResolution](GeometryResolution.md)
 - [ModelingLimits](ModelingLimits.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/FittedTextLayout.md

@@ -57,4 +57,4 @@ Nonzero-filled path data in millimetres, positive Y upward; empty for text with
 - [VectorTextLayout](VectorTextLayout.md)
 - [VectorTextMetrics](VectorTextMetrics.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/Frame3.md

@@ -8,7 +8,7 @@ A right-handed orthonormal coordinate frame expressed in world coordinates.
 
 
 
-`readonly` **origin**: [`Vector3`](Vector3.md)
+`readonly` **origin**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -20,7 +20,7 @@ World-space origin of the local frame.
 
 
 
-`readonly` **xAxis**: [`Vector3`](Vector3.md)
+`readonly` **xAxis**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -32,7 +32,7 @@ Unit vector defining the local +X axis.
 
 
 
-`readonly` **yAxis**: [`Vector3`](Vector3.md)
+`readonly` **yAxis**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -44,7 +44,7 @@ Unit vector defining the local +Y axis.
 
 
 
-`readonly` **zAxis**: [`Vector3`](Vector3.md)
+`readonly` **zAxis**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -53,6 +53,6 @@ Unit vector defining the local +Z axis.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GeometryError.md

@@ -94,4 +94,4 @@ Operation and scalar facts associated with the failure.
 - [GeometryErrorCode](GeometryErrorCode.md)
 - [GeometryErrorContext](GeometryErrorContext.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GeometryErrorCode.md

@@ -4,4 +4,4 @@ Stable categories for invalid inputs, topology, allocation, and runtime failures
 
 **GeometryErrorCode** = `"COMPLEXITY_LIMIT"` \| `"DEGENERATE_GEOMETRY"` \| `"INVALID_ARGUMENT"` \| `"INVALID_MESH"` \| `"INVALID_TOPOLOGY"` \| `"INVALID_TOLERANCE"` \| `"NON_FINITE_VALUE"` \| `"SELF_INTERSECTION"` \| `"SINGULAR_TRANSFORM"` \| `"UNSUPPORTED_RUNTIME"`
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GeometryErrorContext.md

@@ -26,4 +26,4 @@ Optional scalar facts useful for diagnostics without parsing the message.
 
 Stable operation name, such as `normalizeContour` or `extrude`.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GeometryResolution.md

@@ -2,6 +2,10 @@
 
 Tessellation policy for sampled geometry measured in millimetres.
 
+## Extended by
+
+- [`CircularResolutionOptions`](CircularResolutionOptions.md)
+
 ## Properties
 
 ### circularSegments?
@@ -62,4 +66,9 @@ Upper safety bound for a full circle; defaults to the selected maxCircularSegmen
 
 Lower full-circle segment count; defaults to 16 or a lower selected circular ceiling.
 
-Package: `@metamesh/modeling@0.13.0`.
+
+## Related APIs
+
+- [CircularResolutionOptions](CircularResolutionOptions.md)
+
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GeometrySamplingLimits.md

@@ -59,4 +59,4 @@ Maximum segments around one complete circle.
 
 - [ModelingLimits](ModelingLimits.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GeometryToleranceOptions.md

@@ -38,4 +38,4 @@ Angular comparison threshold in radians. Must be finite and greater than zero.
 
 Dimensionless scale multiplier. Must be finite and non-negative.
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/GridPatternOptions.md

@@ -2,7 +2,7 @@
 
 XY or XYZ grid with X varying fastest. The first item starts at the local origin.
 
-**GridPatternOptions** = `object` & (\{ `count`: [`Vector2`](Vector2.md); `spacing`: [`Vector2`](Vector2.md); \} \| \{ `count`: [`Vector3`](Vector3.md); `spacing`: [`Vector3`](Vector3.md); \})
+**GridPatternOptions** = `object` & (\{ `count`: [`Vector2Tuple`](Vector2Tuple.md); `spacing`: [`Vector2Tuple`](Vector2Tuple.md); \} \| \{ `count`: [`Vector3Tuple`](Vector3Tuple.md); `spacing`: [`Vector3Tuple`](Vector3Tuple.md); \})
 
 
 
@@ -32,11 +32,11 @@ Optional right-handed local axes and origin for the grid.
 ## Related APIs
 
 - [Frame3](Frame3.md)
-- [Vector2](Vector2.md)
-- [Vector3](Vector3.md)
+- [Vector2Tuple](Vector2Tuple.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/geometry/HeightfieldMeshLimits.md

@@ -11,4 +11,4 @@ Trusted output ceilings for pure construction; omitted fields use engine default
 
 - [ModelingLimits](ModelingLimits.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.