@metamesh/modeling 0.13.0 → 0.14.0

package/dist/docs/reference/model/Section.md

@@ -1,6 +1,6 @@
 # Section
 
-Immutable deferred filled XY section recipe belonging to exactly one model session. Methods run during synchronous generation and preserve their receiver. Distances use millimetres; rotations are counterclockwise degrees about the origin. Construction uses the session resolution unless the operation supplies explicit options.
+Immutable deferred filled XY section recipe. Construction and composition require no engine. Ordinary recipes may be reused across sessions regardless of where constructed. Observed components and recipes using them can only be evaluated in their originating session. Methods leave the source unchanged; observations require a synchronous model execution. Distances use millimetres; rotations use counterclockwise degrees. Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults.
 
 ## Example: Extrude an outline with a border
 
@@ -21,7 +21,7 @@ const body = rectangle({ size: [20, 12] })
 
 
 
-Compile-time ownership brand for a same-session section.
+Compile-time identity brand for an immutable filled section recipe.
 
 ## Methods
 
@@ -29,7 +29,7 @@ Compile-time ownership brand for a same-session section.
 
 
 
-**translate**(`offset`: [`Vector2`](Vector2.md)): `Section`
+**translate**(`offset`: [`Vector2Input`](Vector2Input.md)): `Section`
 
 
 
@@ -39,7 +39,7 @@ Translates XY coordinates in millimetres.
 
 <a id="offset"></a>
 
-**`offset`** · [`Vector2`](Vector2.md) · Required
+**`offset`** · [`Vector2Input`](Vector2Input.md) · Required
 
 
 
@@ -53,11 +53,12 @@ Translates XY coordinates in millimetres.
 
 
 
-**rotate**(`degrees`: `number`): `Section`
+**rotate**(`degrees`: `number`, `options?`: [`Pivot2Options`](Pivot2Options.md)): `Section`
 
 
 
-Rotates counterclockwise about the origin by a scalar angle in degrees.
+Rotates counterclockwise in degrees.
+`options.pivot` is a fixed world-space point; omission uses the coordinate origin.
 
 #### Parameters
 
@@ -67,6 +68,16 @@ Rotates counterclockwise about the origin by a scalar angle in degrees.
 
 
 
+<a id="options"></a>
+
+**`options`** · [`Pivot2Options`](Pivot2Options.md) · Optional
+
+- [`pivot`](Pivot2Options.md#pivot) · [`Vector2Input`](Vector2Input.md) · Optional
+
+  World-space point left fixed by rotation or scaling.
+
+
+
 #### Returns
 
 `Section`
@@ -77,17 +88,28 @@ Rotates counterclockwise about the origin by a scalar angle in degrees.
 
 
 
-**scale**(`factors`: `number` \| [`Vector2`](Vector2.md)): `Section`
+**scale**(`factors`: `number` \| [`Vector2Input`](Vector2Input.md), `options?`: [`Pivot2Options`](Pivot2Options.md)): `Section`
 
 
 
-Nonsingular scaling about the origin.
+Uniform or per-axis nonsingular scaling; negative factors reflect geometry.
+`options.pivot` is a fixed world-space point; omission uses the coordinate origin.
 
 #### Parameters
 
 <a id="factors"></a>
 
-**`factors`** · `number` \| [`Vector2`](Vector2.md) · Required
+**`factors`** · `number` \| [`Vector2Input`](Vector2Input.md) · Required
+
+
+
+<a id="options-1"></a>
+
+**`options`** · [`Pivot2Options`](Pivot2Options.md) · Optional
+
+- [`pivot`](Pivot2Options.md#pivot) · [`Vector2Input`](Vector2Input.md) · Optional
+
+  World-space point left fixed by rotation or scaling.
 
 
 
@@ -101,7 +123,7 @@ Nonsingular scaling about the origin.
 
 
 
-**mirror**(`normal`: [`Vector2`](Vector2.md)): `Section`
+**mirror**(`normal`: [`Vector2Input`](Vector2Input.md)): `Section`
 
 
 
@@ -111,7 +133,7 @@ Reflection across an origin line/plane.
 
 <a id="normal"></a>
 
-**`normal`** · [`Vector2`](Vector2.md) · Required
+**`normal`** · [`Vector2Input`](Vector2Input.md) · Required
 
 
 
@@ -125,17 +147,17 @@ Reflection across an origin line/plane.
 
 
 
-**transform**(`matrix`: [`Transform2`](Transform2.md)): `Section`
+**transform**(`placement`: [`Transform2Input`](Transform2Input.md)): `Section`
 
 
 
-Row-major affine transform preserving dimensionality.
+Applies a reusable XY placement or canonical row-major matrix.
 
 #### Parameters
 
-<a id="matrix"></a>
+<a id="placement"></a>
 
-**`matrix`** · [`Transform2`](Transform2.md) · Required
+**`placement`** · [`Transform2Input`](Transform2Input.md) · Required
 
 
 
@@ -145,6 +167,22 @@ Row-major affine transform preserving dimensionality.
 
 ***
 
+### toRegionData()
+
+
+
+**toRegionData**(): [`RegionData`](RegionData.md)
+
+
+
+Copies canonical filled polygons for interchange; requires an active model execution.
+
+#### Returns
+
+[`RegionData`](RegionData.md)
+
+***
+
 ### subtract()
 
 
@@ -204,7 +242,7 @@ than selecting a lower rendering quality; fine features may be removed.
 
 
 
-Returns a new same-session handle with copied named anchors; existing names may be replaced.
+Returns a new recipe with copied named anchors; existing names may be replaced.
 
 #### Parameters
 
@@ -224,7 +262,7 @@ Returns a new same-session handle with copied named anchors; existing names may
 
 
 
-**offset**(`distance`: `number`, `options?`: [`RegionOffsetOptions`](RegionOffsetOptions.md)): `Section`
+**offset**(`distance`: `number`, `options?`: [`SectionOffsetOptions`](SectionOffsetOptions.md)): `Section`
 
 
 
@@ -238,23 +276,23 @@ Native millimetre offset preserving holes.
 
 
 
-<a id="options"></a>
+<a id="options-2"></a>
 
-**`options`** · [`RegionOffsetOptions`](RegionOffsetOptions.md) · Optional
+**`options`** · [`SectionOffsetOptions`](SectionOffsetOptions.md) · Optional
 
-- [`circularSegments`](RegionOffsetOptions.md#circularsegments) · `number` · Optional
+- [`circularSegments`](SectionOffsetOptions.md#circularsegments) · `number` · Optional
 
   Number of segments per full circle for round joins.
 
-- [`join`](RegionOffsetOptions.md#join) · [`RegionOffsetJoin`](RegionOffsetJoin.md) · Optional
+- [`join`](SectionOffsetOptions.md#join) · [`SectionOffsetJoin`](SectionOffsetJoin.md) · Optional
 
   Corner treatment; defaults to `round`.
 
-- [`miterLimit`](RegionOffsetOptions.md#miterlimit) · `number` · Optional
+- [`miterLimit`](SectionOffsetOptions.md#miterlimit) · `number` · Optional
 
   Maximum miter extension in offset-distance multiples; at least two.
 
-- [`resolution`](RegionOffsetOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
+- [`resolution`](SectionOffsetOptions.md#resolution) · [`GeometryResolution`](GeometryResolution.md) · Optional
 
   Operation-level physical tessellation policy over the active model-wide policy.
 
@@ -278,7 +316,7 @@ Extrudes along +Z with degree twist and top scaling.
 
 #### Parameters
 
-<a id="options-1"></a>
+<a id="options-3"></a>
 
 **`options`** · [`ExtrudeOptions`](ExtrudeOptions.md) · Required
 
@@ -306,7 +344,7 @@ Extrudes along +Z with degree twist and top scaling.
 
   Operation-level physical policy over the nearest model scope.
 
-- [`scaleTop`](ExtrudeOptions.md#scaletop) · `number` \| [`Vector2`](Vector2.md) · Optional
+- [`scaleTop`](ExtrudeOptions.md#scaletop) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) · Optional
 
   Finite uniform or XY scale of the top profile; defaults to one.
 
@@ -334,7 +372,7 @@ Revolves a filled radial/Z shape around +Z, with caps for partial sweeps.
 
 #### Parameters
 
-<a id="options-2"></a>
+<a id="options-4"></a>
 
 **`options`** · [`RevolveOptions`](RevolveOptions.md) · Optional
 
@@ -372,7 +410,7 @@ Revolves a filled radial/Z shape around +Z, with caps for partial sweeps.
 
 
 
-**sweep**(`path`: readonly [`Vector3`](Vector3.md)[], `options?`: [`SweepOptions`](SweepOptions.md)): [`Solid`](Solid.md)
+**sweep**(`path`: readonly [`Vector3Tuple`](Vector3Tuple.md)[], `options?`: [`SweepOptions`](SweepOptions.md)): [`Solid`](Solid.md)
 
 
 
@@ -382,11 +420,11 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
 <a id="path"></a>
 
-**`path`** · readonly [`Vector3`](Vector3.md)[] · Required
+**`path`** · readonly [`Vector3Tuple`](Vector3Tuple.md)[] · Required
 
 
 
-<a id="options-3"></a>
+<a id="options-5"></a>
 
 **`options`** · [`SweepOptions`](SweepOptions.md) · Optional
 
@@ -414,7 +452,7 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
   Twist advances by physical path length (default), or normalized authored station position, including a closed seam gap.
 
-- [`scale`](SweepOptions.md#scale) · `number` \| [`Vector2`](Vector2.md) \| readonly [`Vector2`](Vector2.md)[] · Optional
+- [`scale`](SweepOptions.md#scale) · `number` \| [`Vector2Tuple`](Vector2Tuple.md) \| readonly [`Vector2Tuple`](Vector2Tuple.md)[] · Optional
 
   Positive uniform/XY scale, or one XY pair per path station. Defaults to one.
 
@@ -433,13 +471,15 @@ Sweeps this filled section using the selected frame policy and degree twist.
 
 - [Anchor3](Anchor3.md)
 - [ExtrudeOptions](ExtrudeOptions.md)
-- [RegionOffsetOptions](RegionOffsetOptions.md)
+- [Pivot2Options](Pivot2Options.md)
+- [RegionData](RegionData.md)
 - [RevolveOptions](RevolveOptions.md)
+- [SectionOffsetOptions](SectionOffsetOptions.md)
 - [Solid](Solid.md)
 - [SweepOptions](SweepOptions.md)
-- [Transform2](Transform2.md)
-- [Vector2](Vector2.md)
-- [Vector3](Vector3.md)
+- [Transform2Input](Transform2Input.md)
+- [Vector2Input](Vector2Input.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
@@ -447,4 +487,4 @@ Sweeps this filled section using the selected frame policy and degree twist.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/SectionHullOptions.md

@@ -1,8 +1,8 @@
 # SectionHullOptions
 
-Planar convex hull inputs are finite XY points or same-session filled sections.
+Planar convex hull inputs are finite XY points or filled section recipes.
 
-**SectionHullOptions** = \{ `points`: readonly [`Vector2`](Vector2.md)[]; `sections?`: `never`; \} \| \{ `sections`: readonly [`Section`](Section.md)[]; `points?`: `never`; \}
+**SectionHullOptions** = \{ `points`: readonly [`Vector2Tuple`](Vector2Tuple.md)[]; `sections?`: `never`; \} \| \{ `sections`: readonly [`Section`](Section.md)[]; `points?`: `never`; \}
 
 
 
@@ -10,13 +10,13 @@ Planar convex hull inputs are finite XY points or same-session filled sections.
 
 ### Type Literal
 
-\{ `points`: readonly [`Vector2`](Vector2.md)[]; `sections?`: `never`; \}
+\{ `points`: readonly [`Vector2Tuple`](Vector2Tuple.md)[]; `sections?`: `never`; \}
 
 #### points
 
 
 
-`readonly` **points**: readonly [`Vector2`](Vector2.md)[]
+`readonly` **points**: readonly [`Vector2Tuple`](Vector2Tuple.md)[]
 
 
 
@@ -46,7 +46,7 @@ Point input excludes section input.
 
 
 
-One through 1000 same-session sections to include in the convex hull.
+One through 1000 filled section recipes to include in the convex hull.
 
 #### points?
 
@@ -62,11 +62,11 @@ Section input excludes point input.
 ## Related APIs
 
 - [Section](Section.md)
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
 ## Guides
 
 - [Choose the Boolean by the material you want](../../guides/fundamentals.md#choose-the-boolean-by-the-material-you-want)
 - [Primitive booleans and repeated placement](../../guides/recipes.md#primitive-booleans-and-repeated-placement)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/SectionInspection.md

@@ -44,7 +44,7 @@ Number of extracted outer and hole contours.
 
 
 
-`readonly` **max**: [`Vector2`](Vector2.md)
+`readonly` **max**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -56,7 +56,7 @@ Inclusive maximum coordinates in millimetres.
 
 
 
-`readonly` **min**: [`Vector2`](Vector2.md)
+`readonly` **min**: [`Vector2Tuple`](Vector2Tuple.md)
 
 
 
@@ -89,10 +89,10 @@ Number of native section vertices.
 
 ## Related APIs
 
-- [Vector2](Vector2.md)
+- [Vector2Tuple](Vector2Tuple.md)
 
 ## Guides
 
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/{RegionOffsetJoin.md → SectionOffsetJoin.md}

@@ -1,8 +1,8 @@
-# RegionOffsetJoin
+# SectionOffsetJoin
 
 Clipper2 join styles accepted by robust region offsets.
 
-**RegionOffsetJoin** = `"miter"` \| `"round"` \| `"square"`
+**SectionOffsetJoin** = `"miter"` \| `"round"` \| `"square"`
 
 
 
@@ -13,4 +13,4 @@ Clipper2 join styles accepted by robust region offsets.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/{RegionOffsetOptions.md → SectionOffsetOptions.md}

@@ -1,4 +1,4 @@
-# RegionOffsetOptions
+# SectionOffsetOptions
 
 Options controlling robust Clipper2 region offsets.
 
@@ -20,7 +20,7 @@ Number of segments per full circle for round joins.
 
 
 
-`readonly` `optional` **join?**: [`RegionOffsetJoin`](RegionOffsetJoin.md)
+`readonly` `optional` **join?**: [`SectionOffsetJoin`](SectionOffsetJoin.md)
 
 
 
@@ -54,7 +54,7 @@ Operation-level physical tessellation policy over the active model-wide policy.
 ## Related APIs
 
 - [GeometryResolution](GeometryResolution.md)
-- [RegionOffsetJoin](RegionOffsetJoin.md)
+- [SectionOffsetJoin](SectionOffsetJoin.md)
 
 ## Guides
 
@@ -62,4 +62,4 @@ Operation-level physical tessellation policy over the active model-wide policy.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/SmoothEdgeTreatment.md

@@ -73,4 +73,4 @@ Explicit sampling ceilings, bounded by the host policy.
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/Solid.md

@@ -1,6 +1,6 @@
 # Solid
 
-Immutable deferred solid recipe belonging to exactly one model session. Methods run during synchronous generation, preserve their receiver, and use millimetres and degrees. A no-op may reuse the receiver; final part placement belongs in `part` options.
+Immutable deferred solid recipe. Construction and composition require no engine. Ordinary recipes may be reused across sessions regardless of where constructed. Explicit resolution settings are captured; unspecified settings inherit the evaluating host's defaults. Observed components and recipes using them can only be evaluated in their originating session. Methods leave the source unchanged and use millimetres and degrees. A no-op may reuse the receiver; final part placement belongs in `part` options.
 
 ## Example: Shape a body with a through bore
 
@@ -20,7 +20,7 @@ const body = box({ size: [30, 20, 6] })
 
 
 
-Compile-time ownership brand for a same-session solid.
+Compile-time identity brand for an immutable solid recipe.
 
 ## Methods
 
@@ -28,7 +28,7 @@ Compile-time ownership brand for a same-session solid.
 
 
 
-**translate**(`offset`: [`Vector3`](Vector3.md)): `Solid`
+**translate**(`offset`: [`Vector3Input`](Vector3Input.md)): `Solid`
 
 
 
@@ -38,7 +38,7 @@ Translates XYZ coordinates in millimetres.
 
 <a id="offset"></a>
 
-**`offset`** · [`Vector3`](Vector3.md) · Required
+**`offset`** · [`Vector3Input`](Vector3Input.md) · Required
 
 
 
@@ -52,17 +52,28 @@ Translates XYZ coordinates in millimetres.
 
 
 
-**rotate**(`degrees`: [`Vector3`](Vector3.md)): `Solid`
+**rotate**(`degrees`: [`Vector3Input`](Vector3Input.md), `options?`: [`Pivot3Options`](Pivot3Options.md)): `Solid`
 
 
 
-Rotates about the origin using XYZ Euler angles in degrees.
+Rotates about global X, then Y, then Z in degrees.
+`options.pivot` is a fixed world-space point; omission uses the coordinate origin.
 
 #### Parameters
 
 <a id="degrees"></a>
 
-**`degrees`** · [`Vector3`](Vector3.md) · Required
+**`degrees`** · [`Vector3Input`](Vector3Input.md) · Required
+
+
+
+<a id="options"></a>
+
+**`options`** · [`Pivot3Options`](Pivot3Options.md) · Optional
+
+- [`pivot`](Pivot3Options.md#pivot) · [`Vector3Input`](Vector3Input.md) · Optional
+
+  World-space point left fixed by rotation or scaling.
 
 
 
@@ -76,17 +87,28 @@ Rotates about the origin using XYZ Euler angles in degrees.
 
 
 
-**scale**(`factors`: `number` \| [`Vector3`](Vector3.md)): `Solid`
+**scale**(`factors`: `number` \| [`Vector3Input`](Vector3Input.md), `options?`: [`Pivot3Options`](Pivot3Options.md)): `Solid`
 
 
 
-Nonsingular scaling about the origin.
+Uniform or per-axis nonsingular scaling; negative factors reflect geometry.
+`options.pivot` is a fixed world-space point; omission uses the coordinate origin.
 
 #### Parameters
 
 <a id="factors"></a>
 
-**`factors`** · `number` \| [`Vector3`](Vector3.md) · Required
+**`factors`** · `number` \| [`Vector3Input`](Vector3Input.md) · Required
+
+
+
+<a id="options-1"></a>
+
+**`options`** · [`Pivot3Options`](Pivot3Options.md) · Optional
+
+- [`pivot`](Pivot3Options.md#pivot) · [`Vector3Input`](Vector3Input.md) · Optional
+
+  World-space point left fixed by rotation or scaling.
 
 
 
@@ -100,7 +122,7 @@ Nonsingular scaling about the origin.
 
 
 
-**mirror**(`normal`: [`Vector3`](Vector3.md)): `Solid`
+**mirror**(`normal`: [`Vector3Input`](Vector3Input.md)): `Solid`
 
 
 
@@ -110,7 +132,7 @@ Reflection across an origin line/plane.
 
 <a id="normal"></a>
 
-**`normal`** · [`Vector3`](Vector3.md) · Required
+**`normal`** · [`Vector3Input`](Vector3Input.md) · Required
 
 
 
@@ -124,17 +146,17 @@ Reflection across an origin line/plane.
 
 
 
-**transform**(`matrix`: [`Transform3`](Transform3.md)): `Solid`
+**transform**(`placement`: [`Transform3Input`](Transform3Input.md)): `Solid`
 
 
 
-Row-major affine transform preserving dimensionality.
+Applies a reusable XYZ placement or canonical row-major matrix.
 
 #### Parameters
 
-<a id="matrix"></a>
+<a id="placement"></a>
 
-**`matrix`** · [`Transform3`](Transform3.md) · Required
+**`placement`** · [`Transform3Input`](Transform3Input.md) · Required
 
 
 
@@ -203,7 +225,7 @@ and the solid's existing native tolerance. Choose it from the detail you can aff
 
 
 
-Returns a new same-session handle with copied named anchors; existing names may be replaced.
+Returns a new recipe with copied named anchors; existing names may be replaced.
 
 #### Parameters
 
@@ -243,7 +265,7 @@ Places an explicit or named source anchor against an explicit target anchor.
 
 
 
-<a id="options"></a>
+<a id="options-2"></a>
 
 **`options`** · [`AttachOptions`](AttachOptions.md) · Optional
 
@@ -338,13 +360,14 @@ Takes a filled horizontal slice at Z millimetres.
 
 - [Anchor3](Anchor3.md)
 - [AttachOptions](AttachOptions.md)
+- [Pivot3Options](Pivot3Options.md)
 - [Section](Section.md)
-- [Transform3](Transform3.md)
-- [Vector3](Vector3.md)
+- [Transform3Input](Transform3Input.md)
+- [Vector3Input](Vector3Input.md)
 
 ## Guides
 
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/SolidInspection.md

@@ -20,7 +20,7 @@ Whether this native solid contains no material.
 
 
 
-`readonly` **max**: [`Vector3`](Vector3.md)
+`readonly` **max**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -32,7 +32,7 @@ Inclusive maximum coordinates in millimetres.
 
 
 
-`readonly` **min**: [`Vector3`](Vector3.md)
+`readonly` **min**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -89,10 +89,10 @@ Effective native geometric tolerance in millimetres.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
 ## Guides
 
 - [Solid inspection](../../guides/recipes.md#solid-inspection)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/SolidRayHit.md

@@ -32,7 +32,7 @@ Distance from the ray origin in millimetres.
 
 
 
-`readonly` **position**: [`Vector3`](Vector3.md)
+`readonly` **position**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -44,7 +44,7 @@ Intersection position in millimetres.
 
 
 
-`readonly` **normal**: [`Vector3`](Vector3.md)
+`readonly` **normal**: [`Vector3Tuple`](Vector3Tuple.md)
 
 
 
@@ -53,6 +53,6 @@ Outward unit surface normal at the intersection.
 
 ## Related APIs
 
-- [Vector3](Vector3.md)
+- [Vector3Tuple](Vector3Tuple.md)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/SphereOptions.md

@@ -17,4 +17,4 @@ Exactly one radius or diameter, placement, and tessellation for an origin-center
 - [Choose a primitive](../../guides/recipes.md#choose-a-primitive)
 - [Treated boxes, frustums, and mirrored arrays](../../guides/recipes.md#treated-boxes-frustums-and-mirrored-arrays)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.

package/dist/docs/reference/model/StarOptions.md

@@ -95,4 +95,4 @@ Initial counterclockwise rotation in degrees; defaults to zero.
 - [SVG sections: fills and strokes are different inputs](../../guides/concepts.md#svg-sections-fills-and-strokes-are-different-inputs)
 - [Text and font variability](../../guides/concepts.md#text-and-font-variability)
 
-Package: `@metamesh/modeling@0.13.0`.
+Package: `@metamesh/modeling@0.14.0`.