@matter/types 0.14.0-alpha.0-20250531-7ed2d6da8 → 0.14.0-alpha.0-20250602-37f27bb02

package/dist/esm/clusters/window-covering.js

@@ -37,7 +37,7 @@ var WindowCovering;
     /**
      * This field shall specify the requested physical lift/slide position in unit cm (centimeters).
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.4.1
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.4.1
      */
     liftValue: TlvField(0, TlvUInt16)
   });
@@ -45,7 +45,7 @@ var WindowCovering;
     /**
      * This field shall specify the requested physical tilt position in unit 0.1° (tenth of a degrees).
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.6.1
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.6.1
      */
     tiltValue: TlvField(0, TlvUInt16)
   });
@@ -73,7 +73,7 @@ var WindowCovering;
      *
      *   • 1 = Operational
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.1
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.1
      */
     operational: BitFlag(0),
     onlineReserved: BitFlag(1),
@@ -86,7 +86,7 @@ var WindowCovering;
      *
      *   • 1 = Lift movement is reversed
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.2
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.2
      */
     liftMovementReversed: BitFlag(2),
     /**
@@ -98,7 +98,7 @@ var WindowCovering;
      *
      *   • 1 = Lift control is position aware (PA_LF)
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.3
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.3
      */
     liftPositionAware: BitFlag(3),
     /**
@@ -110,7 +110,7 @@ var WindowCovering;
      *
      *   • 1 = Tilt control is position aware (PA_TL)
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.4
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.4
      */
     tiltPositionAware: BitFlag(4),
     /**
@@ -123,7 +123,7 @@ var WindowCovering;
      *
      *   • 1 = Encoder Controlled
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.5
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.5
      */
     liftEncoderControlled: BitFlag(5),
     /**
@@ -136,7 +136,7 @@ var WindowCovering;
      *
      *   • 1 = Encoder Controlled
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.1.6
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.1.6
      */
     tiltEncoderControlled: BitFlag(6)
   };
@@ -147,7 +147,7 @@ var WindowCovering;
      * These bits shall indicate in which direction the covering is currently moving or if it has stopped. Global
      * operational state shall always reflect the overall motion of the device.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.3.1
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.3.1
      */
     global: BitFieldEnum(0, 2),
     /**
@@ -155,7 +155,7 @@ var WindowCovering;
      *
      * These bits shall indicate in which direction the covering’s lift is currently moving or if it has stopped.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.3.2
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.3.2
      */
     lift: BitFieldEnum(2, 2),
     /**
@@ -163,7 +163,7 @@ var WindowCovering;
      *
      * These bits shall indicate in which direction the covering’s tilt is currently moving or if it has stopped.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.3.3
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.3.3
      */
     tilt: BitFieldEnum(4, 2)
   };
@@ -211,7 +211,7 @@ var WindowCovering;
      *
      *   • 1 = Lift movement is reversed
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.1
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.1
      */
     motorDirectionReversed: BitFlag(0),
     /**
@@ -223,7 +223,7 @@ var WindowCovering;
      *
      *   • 1 = Calibration mode
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.2
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.2
      */
     calibrationMode: BitFlag(1),
     /**
@@ -235,7 +235,7 @@ var WindowCovering;
      *
      *   • 1 = Maintenance mode
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.3
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.3
      */
     maintenanceMode: BitFlag(2),
     /**
@@ -247,7 +247,7 @@ var WindowCovering;
      *
      *   • 1 = LEDs will display feedback
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 5.3.5.2.4
+     * @see {@link MatterSpecification.v141.Cluster} § 5.3.5.2.4
      */
     ledFeedback: BitFlag(3)
   };
@@ -310,28 +310,28 @@ var WindowCovering;
        * Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the height of
        * the window covering lift.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.2
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.2
        */
       physicalClosedLimitLift: OptionalFixedAttribute(1, TlvUInt16, { default: 0 }),
       /**
        * Indicates the actual lift position (Unit cm, centimeters) of the window covering from the fully-open
        * position.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.4
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.4
        */
       currentPositionLift: OptionalAttribute(3, TlvNullable(TlvUInt16), { persistent: true, default: null }),
       /**
        * Indicates the open limit for lifting the window covering whether position (in centimeters) is encoded or
        * timed.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.17
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.17
        */
       installedOpenLimitLift: Attribute(16, TlvUInt16.bound({ max: 65534 }), { persistent: true, default: 0 }),
       /**
        * Indicates the closed limit for lifting the window covering whether position (in centimeters) is encoded
        * or timed.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.18
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.18
        */
       installedClosedLimitLift: Attribute(
         17,
@@ -346,28 +346,28 @@ var WindowCovering;
        * Indicates the maximum possible encoder position possible (Unit 0.1°, tenths of a degree) to position the
        * angle of the window covering tilt.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.3
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.3
        */
       physicalClosedLimitTilt: OptionalFixedAttribute(2, TlvUInt16, { default: 0 }),
       /**
        * Indicates the actual tilt position (Unit 0.1°, tenths of a degree) of the window covering from the
        * fully-open position.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.5
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.5
        */
       currentPositionTilt: OptionalAttribute(4, TlvNullable(TlvUInt16), { persistent: true, default: null }),
       /**
        * Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is
        * encoded or timed.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.19
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.19
        */
       installedOpenLimitTilt: Attribute(18, TlvUInt16.bound({ max: 65534 }), { persistent: true, default: 0 }),
       /**
        * Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) is
        * encoded or timed.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.20
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.20
        */
       installedClosedLimitTilt: Attribute(
         19,
@@ -382,7 +382,7 @@ var WindowCovering;
        * Indicates the total number of lift/slide actuations applied to the window covering since the device was
        * installed.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.6
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.6
        */
       numberOfActuationsLift: OptionalAttribute(5, TlvUInt16, { persistent: true, default: 0 })
     },
@@ -404,7 +404,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.5
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.5
        */
       goToLiftPercentage: OptionalCommand(5, WindowCovering2.TlvGoToLiftPercentageRequest, 5, TlvNoResponse)
     }
@@ -415,7 +415,7 @@ var WindowCovering;
        * Indicates the total number of tilt actuations applied to the window covering since the device was
        * installed.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.7
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.7
        */
       numberOfActuationsTilt: OptionalAttribute(6, TlvUInt16, { persistent: true, default: 0 })
     },
@@ -437,7 +437,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.7
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.7
        */
       goToTiltPercentage: OptionalCommand(8, WindowCovering2.TlvGoToTiltPercentageRequest, 8, TlvNoResponse)
     }
@@ -448,7 +448,7 @@ var WindowCovering;
        * Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is
        * equal to CurrentPositionLiftPercent100ths attribute divided by 100.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.11
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.11
        */
       currentPositionLiftPercentage: OptionalAttribute(
         8,
@@ -459,13 +459,13 @@ var WindowCovering;
        * Indicates the position where the window covering lift will go or is moving to as a percentage (Unit
        * 0.01%).
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.13
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.13
        */
       targetPositionLiftPercent100ths: Attribute(11, TlvNullable(TlvPercent100ths), { default: null }),
       /**
        * Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.9
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.9
        */
       currentPositionLiftPercent100ths: Attribute(
         14,
@@ -491,7 +491,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.5
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.5
        */
       goToLiftPercentage: Command(5, WindowCovering2.TlvGoToLiftPercentageRequest, 5, TlvNoResponse)
     }
@@ -502,7 +502,7 @@ var WindowCovering;
        * Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute is
        * equal to CurrentPositionTiltPercent100ths attribute divided by 100.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.12
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.12
        */
       currentPositionTiltPercentage: OptionalAttribute(
         9,
@@ -513,13 +513,13 @@ var WindowCovering;
        * Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit
        * 0.01%).
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.14
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.14
        */
       targetPositionTiltPercent100ths: Attribute(12, TlvNullable(TlvPercent100ths), { default: null }),
       /**
        * Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals 100.00%.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.10
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.10
        */
       currentPositionTiltPercent100ths: Attribute(
         15,
@@ -545,7 +545,7 @@ var WindowCovering;
        * only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND status SHOULD be
        * returned.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.7
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.7
        */
       goToTiltPercentage: Command(8, WindowCovering2.TlvGoToTiltPercentageRequest, 8, TlvNoResponse)
     }
@@ -553,7 +553,7 @@ var WindowCovering;
   WindowCovering2.LiftAndAbsolutePositionComponent = MutableCluster.Component({
     commands: {
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.4
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.4
        */
       goToLiftValue: OptionalCommand(4, WindowCovering2.TlvGoToLiftValueRequest, 4, TlvNoResponse)
     }
@@ -561,7 +561,7 @@ var WindowCovering;
   WindowCovering2.TiltAndAbsolutePositionComponent = MutableCluster.Component({
     commands: {
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.6
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.6
        */
       goToTiltValue: OptionalCommand(7, WindowCovering2.TlvGoToTiltValueRequest, 7, TlvNoResponse)
     }
@@ -576,13 +576,13 @@ var WindowCovering;
        * is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is lift Open
        * and Close).
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.4.1
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.4.1
        */
       lift: BitFlag(0),
       /**
        * The Tilt feature applies to window coverings with vertical or horizontal strips.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.4.2
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.4.2
        */
       tilt: BitFlag(1),
       /**
@@ -596,7 +596,7 @@ var WindowCovering;
        * As a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be supported
        * for new implementations.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.4.4
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.4.4
        */
       absolutePosition: BitFlag(3),
       /**
@@ -608,7 +608,7 @@ var WindowCovering;
       /**
        * This attribute shall identify the type of window covering.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.1
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.1
        */
       type: FixedAttribute(0, TlvEnum(), { default: 0 /* Rollershade */ }),
       /**
@@ -617,13 +617,13 @@ var WindowCovering;
        * To change settings, devices shall write to the Mode attribute. The behavior causing the setting or
        * clearing of each bit is vendor specific.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.8
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.8
        */
       configStatus: Attribute(7, TlvBitmap(TlvUInt8, WindowCovering2.ConfigStatus), { persistent: true }),
       /**
        * Indicates the currently ongoing operations and applies to all type of devices.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.15
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.15
        */
       operationalStatus: Attribute(10, TlvBitmap(TlvUInt8, WindowCovering2.OperationalStatus)),
       /**
@@ -632,7 +632,7 @@ var WindowCovering;
        *
        * The table below helps to match the EndProductType attribute with the Type attribute.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.16
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.16
        */
       endProductType: FixedAttribute(13, TlvEnum(), { default: 0 /* RollerShade */ }),
       /**
@@ -645,7 +645,7 @@ var WindowCovering;
        * write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits set, must
        * be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.21
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.21
        */
       mode: WritableAttribute(
         23,
@@ -657,7 +657,7 @@ var WindowCovering;
        * movements. By default for nominal operation all flags are cleared (0). A device might support none, one
        * or several bit flags from this attribute (all optional).
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.6.22
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.6.22
        */
       safetyStatus: OptionalAttribute(26, TlvBitmap(TlvUInt16, WindowCovering2.SafetyStatus))
     },
@@ -692,7 +692,7 @@ var WindowCovering;
        *
        *   • CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.1
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.1
        */
       upOrOpen: Command(0, TlvNoArguments, 0, TlvNoResponse),
       /**
@@ -725,7 +725,7 @@ var WindowCovering;
        *
        *   • CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.2
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.2
        */
       downOrClose: Command(1, TlvNoArguments, 1, TlvNoResponse),
       /**
@@ -738,7 +738,7 @@ var WindowCovering;
        *   • TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths attribute
        *     value.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 5.3.7.3
+       * @see {@link MatterSpecification.v141.Cluster} § 5.3.7.3
        */
       stopMotion: Command(2, TlvNoArguments, 2, TlvNoResponse)
     },

package/dist/esm/common/StatusCode.d.ts

@@ -3,18 +3,9 @@
  * Copyright 2022-2025 Matter.js Authors
  * SPDX-License-Identifier: Apache-2.0
  */
-import { MatterError } from "#general";
 import { Status } from "../globals/Status.js";
+/** @deprecated use {@link Status} */
 export declare const StatusCode: typeof Status;
+/** @deprecated use {@link Status} */
 export type StatusCode = Status;
-/** Error base Class for all errors related to the status response messages. */
-export declare class StatusResponseError extends MatterError {
-    readonly code: StatusCode;
-    readonly clusterCode?: number | undefined;
-    constructor(message: string, code: StatusCode, clusterCode?: number | undefined);
-    static is(error: unknown, ...codes: StatusCode[]): error is StatusResponseError;
-}
-/** Error class for Status response errors that were received from the other node. */
-export declare class ReceivedStatusResponseError extends StatusResponseError {
-}
 //# sourceMappingURL=StatusCode.d.ts.map

package/dist/esm/common/StatusCode.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"StatusCode.d.ts","sourceRoot":"","sources":["../../../src/common/StatusCode.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,OAAO,EAAE,WAAW,EAAE,MAAM,UAAU,CAAC;AACvC,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAE9C,eAAO,MAAM,UAAU,eAAS,CAAC;AACjC,MAAM,MAAM,UAAU,GAAG,MAAM,CAAC;AAEhC,+EAA+E;AAC/E,qBAAa,mBAAoB,SAAQ,WAAW;aAG5B,IAAI,EAAE,UAAU;aAChB,WAAW,CAAC,EAAE,MAAM;gBAFpC,OAAO,EAAE,MAAM,EACC,IAAI,EAAE,UAAU,EAChB,WAAW,CAAC,EAAE,MAAM,YAAA;IAOxC,MAAM,CAAC,EAAE,CAAC,KAAK,EAAE,OAAO,EAAE,GAAG,KAAK,EAAE,UAAU,EAAE,GAAG,KAAK,IAAI,mBAAmB;CAGlF;AAED,qFAAqF;AACrF,qBAAa,2BAA4B,SAAQ,mBAAmB;CAAG"}
+{"version":3,"file":"StatusCode.d.ts","sourceRoot":"","sources":["../../../src/common/StatusCode.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AAE9C,qCAAqC;AACrC,eAAO,MAAM,UAAU,eAAS,CAAC;AAEjC,qCAAqC;AACrC,MAAM,MAAM,UAAU,GAAG,MAAM,CAAC"}

package/dist/esm/common/StatusCode.js

@@ -3,25 +3,9 @@
  * Copyright 2022-2025 Matter.js Authors
  * SPDX-License-Identifier: Apache-2.0
  */
-import { MatterError } from "#general";
 import { Status } from "../globals/Status.js";
 const StatusCode = Status;
-class StatusResponseError extends MatterError {
-  constructor(message, code, clusterCode) {
-    super();
-    this.code = code;
-    this.clusterCode = clusterCode;
-    this.message = `(${code}${clusterCode !== void 0 ? `/${clusterCode}` : ""}) ${message}`;
-  }
-  static is(error, ...codes) {
-    return error instanceof StatusResponseError && (!codes.length || codes.includes(error.code));
-  }
-}
-class ReceivedStatusResponseError extends StatusResponseError {
-}
 export {
-  ReceivedStatusResponseError,
-  StatusCode,
-  StatusResponseError
+  StatusCode
 };
 //# sourceMappingURL=StatusCode.js.map

package/dist/esm/common/StatusCode.js.map

@@ -1,6 +1,6 @@
 {
   "version": 3,
   "sources": ["../../../src/common/StatusCode.ts"],
-  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,SAAS,mBAAmB;AAC5B,SAAS,cAAc;AAEhB,MAAM,aAAa;AAInB,MAAM,4BAA4B,YAAY;AAAA,EAC1C,YACH,SACgB,MACA,aAClB;AACE,UAAM;AAHU;AACA;AAIhB,SAAK,UAAU,IAAI,IAAI,GAAG,gBAAgB,SAAY,IAAI,WAAW,KAAK,EAAE,KAAK,OAAO;AAAA,EAC5F;AAAA,EAEA,OAAO,GAAG,UAAmB,OAAmD;AAC5E,WAAO,iBAAiB,wBAAwB,CAAC,MAAM,UAAU,MAAM,SAAS,MAAM,IAAI;AAAA,EAC9F;AACJ;AAGO,MAAM,oCAAoC,oBAAoB;AAAC;",
+  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,SAAS,cAAc;AAGhB,MAAM,aAAa;",
   "names": []
 }

package/dist/esm/common/StatusResponseError.d.ts

@@ -0,0 +1,21 @@
+/**
+ * @license
+ * Copyright 2022-2025 Project CHIP Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+import { Status } from "#globals/Status.js";
+import { MatterError } from "@matter/general";
+/**
+ * Base class for errors that should produce protocol-facing status codes.
+ */
+export declare class StatusResponseError extends MatterError {
+    readonly code: Status;
+    readonly clusterCode?: number | undefined;
+    constructor(message: string, code: Status, clusterCode?: number | undefined);
+    static is(error: unknown, ...codes: Status[]): error is StatusResponseError;
+    get id(): string;
+}
+/** Error class for Status response errors that were received from the other node. */
+export declare class ReceivedStatusResponseError extends StatusResponseError {
+}
+//# sourceMappingURL=StatusResponseError.d.ts.map

package/dist/esm/common/StatusResponseError.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"StatusResponseError.d.ts","sourceRoot":"","sources":["../../../src/common/StatusResponseError.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,OAAO,EAAE,MAAM,EAAE,MAAM,oBAAoB,CAAC;AAC5C,OAAO,EAAE,WAAW,EAAc,MAAM,iBAAiB,CAAC;AAE1D;;GAEG;AACH,qBAAa,mBAAoB,SAAQ,WAAW;aAG5B,IAAI,EAAE,MAAM;aACZ,WAAW,CAAC,EAAE,MAAM;gBAFpC,OAAO,EAAE,MAAM,EACC,IAAI,EAAE,MAAM,EACZ,WAAW,CAAC,EAAE,MAAM,YAAA;IAKxC,MAAM,CAAC,EAAE,CAAC,KAAK,EAAE,OAAO,EAAE,GAAG,KAAK,EAAE,MAAM,EAAE,GAAG,KAAK,IAAI,mBAAmB;IAI3E,IAAa,EAAE,WAWd;CACJ;AAED,qFAAqF;AACrF,qBAAa,2BAA4B,SAAQ,mBAAmB;CAAG"}

package/dist/esm/common/StatusResponseError.js

@@ -0,0 +1,34 @@
+/**
+ * @license
+ * Copyright 2022-2025 Project CHIP Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+import { Status } from "#globals/Status.js";
+import { MatterError, decamelize } from "@matter/general";
+class StatusResponseError extends MatterError {
+  constructor(message, code, clusterCode) {
+    super(message);
+    this.code = code;
+    this.clusterCode = clusterCode;
+  }
+  static is(error, ...codes) {
+    return error instanceof StatusResponseError && (!codes.length || codes.includes(error.code));
+  }
+  get id() {
+    const id = super.id;
+    if (id === "status-response") {
+      const code = Status[this.code];
+      if (code) {
+        return decamelize(code);
+      }
+    }
+    return id;
+  }
+}
+class ReceivedStatusResponseError extends StatusResponseError {
+}
+export {
+  ReceivedStatusResponseError,
+  StatusResponseError
+};
+//# sourceMappingURL=StatusResponseError.js.map

package/dist/esm/common/StatusResponseError.js.map

@@ -0,0 +1,6 @@
+{
+  "version": 3,
+  "sources": ["../../../src/common/StatusResponseError.ts"],
+  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,SAAS,cAAc;AACvB,SAAS,aAAa,kBAAkB;AAKjC,MAAM,4BAA4B,YAAY;AAAA,EAC1C,YACH,SACgB,MACA,aAClB;AACE,UAAM,OAAO;AAHG;AACA;AAAA,EAGpB;AAAA,EAEA,OAAO,GAAG,UAAmB,OAA+C;AACxE,WAAO,iBAAiB,wBAAwB,CAAC,MAAM,UAAU,MAAM,SAAS,MAAM,IAAI;AAAA,EAC9F;AAAA,EAEA,IAAa,KAAK;AACd,UAAM,KAAK,MAAM;AAEjB,QAAI,OAAO,mBAAmB;AAC1B,YAAM,OAAO,OAAO,KAAK,IAAI;AAC7B,UAAI,MAAM;AACN,eAAO,WAAW,IAAI;AAAA,MAC1B;AAAA,IACJ;AAEA,WAAO;AAAA,EACX;AACJ;AAGO,MAAM,oCAAoC,oBAAoB;AAAC;",
+  "names": []
+}

package/dist/esm/common/ValidationError.d.ts

@@ -3,7 +3,7 @@
  * Copyright 2022-2025 Matter.js Authors
  * SPDX-License-Identifier: Apache-2.0
  */
-import { StatusResponseError } from "./StatusCode.js";
+import { StatusResponseError } from "./StatusResponseError.js";
 /**
  * Base class for validation errors and used when Data validation fails. Please check the provided data.
  * We encode this as StatusResponseError that returns a ConstrainError which is suitable for most

package/dist/esm/common/ValidationError.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"ValidationError.d.ts","sourceRoot":"","sources":["../../../src/common/ValidationError.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,OAAO,EAAc,mBAAmB,EAAE,MAAM,iBAAiB,CAAC;AAElE;;;;;GAKG;AACH,qBAAa,eAAgB,SAAQ,mBAAmB;IAGzC,SAAS,CAAC,EAAE,MAAM;gBADzB,OAAO,EAAE,MAAM,EACR,SAAS,CAAC,EAAE,MAAM,YAAA,EACzB,SAAS,+BAA6B;CAM7C;AAED,uGAAuG;AACvG,qBAAa,0BAA2B,SAAQ,eAAe;CAAG;AAElE;;;GAGG;AACH,qBAAa,+BAAgC,SAAQ,eAAe;gBAC7C,OAAO,EAAE,MAAM,EAAE,SAAS,CAAC,EAAE,MAAM;CAGzD;AAED;;;GAGG;AACH,qBAAa,oCAAqC,SAAQ,eAAe;gBAClD,OAAO,EAAE,MAAM,EAAE,SAAS,CAAC,EAAE,MAAM;CAGzD;AAED;;GAEG;AACH,wBAAgB,WAAW,CAAC,CAAC,SAAS,GAAG,EAAE,EAAE,IAAI,EAAE,CAAC,GAAG,CAAC,EAAE,CAAC,KAAK,IAAI,IACxD,GAAG,GAAG,CAAC,aASlB"}
+{"version":3,"file":"ValidationError.d.ts","sourceRoot":"","sources":["../../../src/common/ValidationError.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAGH,OAAO,EAAE,mBAAmB,EAAE,MAAM,0BAA0B,CAAC;AAE/D;;;;;GAKG;AACH,qBAAa,eAAgB,SAAQ,mBAAmB;IAGzC,SAAS,CAAC,EAAE,MAAM;gBADzB,OAAO,EAAE,MAAM,EACR,SAAS,CAAC,EAAE,MAAM,YAAA,EACzB,SAAS,+BAA6B;CAM7C;AAED,uGAAuG;AACvG,qBAAa,0BAA2B,SAAQ,eAAe;CAAG;AAElE;;;GAGG;AACH,qBAAa,+BAAgC,SAAQ,eAAe;gBAC7C,OAAO,EAAE,MAAM,EAAE,SAAS,CAAC,EAAE,MAAM;CAGzD;AAED;;;GAGG;AACH,qBAAa,oCAAqC,SAAQ,eAAe;gBAClD,OAAO,EAAE,MAAM,EAAE,SAAS,CAAC,EAAE,MAAM;CAGzD;AAED;;GAEG;AACH,wBAAgB,WAAW,CAAC,CAAC,SAAS,GAAG,EAAE,EAAE,IAAI,EAAE,CAAC,GAAG,CAAC,EAAE,CAAC,KAAK,IAAI,IACxD,GAAG,GAAG,CAAC,aASlB"}

package/dist/esm/common/ValidationError.js

@@ -3,7 +3,8 @@
  * Copyright 2022-2025 Matter.js Authors
  * SPDX-License-Identifier: Apache-2.0
  */
-import { StatusCode, StatusResponseError } from "./StatusCode.js";
+import { StatusCode } from "./StatusCode.js";
+import { StatusResponseError } from "./StatusResponseError.js";
 class ValidationError extends StatusResponseError {
   constructor(message, fieldName, errorCode = StatusCode.ConstraintError) {
     super(message, errorCode);

package/dist/esm/common/ValidationError.js.map

@@ -1,6 +1,6 @@
 {
   "version": 3,
   "sources": ["../../../src/common/ValidationError.ts"],
-  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,SAAS,YAAY,2BAA2B;AAQzC,MAAM,wBAAwB,oBAAoB;AAAA,EAC9C,YACH,SACO,WACP,YAAY,WAAW,iBACzB;AACE,UAAM,SAAS,SAAS;AAHjB;AAKP,SAAK,UAAU,IAAI,KAAK,YAAY,IAAI,IAAI,KAAK,IAAI,KAAK,OAAO;AAAA,EACrE;AACJ;AAGO,MAAM,mCAAmC,gBAAgB;AAAC;AAM1D,MAAM,wCAAwC,gBAAgB;AAAA,EAC1D,YAAY,SAAiB,WAAoB;AACpD,UAAM,SAAS,WAAW,WAAW,aAAa;AAAA,EACtD;AACJ;AAMO,MAAM,6CAA6C,gBAAgB;AAAA,EAC/D,YAAY,SAAiB,WAAoB;AACpD,UAAM,SAAS,WAAW,WAAW,aAAa;AAAA,EACtD;AACJ;AAKO,SAAS,YAA6B,MAAyB;AAClE,SAAO,IAAI,MAAS;AAChB,QAAI;AACA,WAAK,GAAG,CAAC;AACT,aAAO;AAAA,IACX,SAAS,GAAG;AACR,sBAAgB,OAAO,CAAC;AACxB,aAAO;AAAA,IACX;AAAA,EACJ;AACJ;",
+  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,SAAS,kBAAkB;AAC3B,SAAS,2BAA2B;AAQ7B,MAAM,wBAAwB,oBAAoB;AAAA,EAC9C,YACH,SACO,WACP,YAAY,WAAW,iBACzB;AACE,UAAM,SAAS,SAAS;AAHjB;AAKP,SAAK,UAAU,IAAI,KAAK,YAAY,IAAI,IAAI,KAAK,IAAI,KAAK,OAAO;AAAA,EACrE;AACJ;AAGO,MAAM,mCAAmC,gBAAgB;AAAC;AAM1D,MAAM,wCAAwC,gBAAgB;AAAA,EAC1D,YAAY,SAAiB,WAAoB;AACpD,UAAM,SAAS,WAAW,WAAW,aAAa;AAAA,EACtD;AACJ;AAMO,MAAM,6CAA6C,gBAAgB;AAAA,EAC/D,YAAY,SAAiB,WAAoB;AACpD,UAAM,SAAS,WAAW,WAAW,aAAa;AAAA,EACtD;AACJ;AAKO,SAAS,YAA6B,MAAyB;AAClE,SAAO,IAAI,MAAS;AAChB,QAAI;AACA,WAAK,GAAG,CAAC;AACT,aAAO;AAAA,IACX,SAAS,GAAG;AACR,sBAAgB,OAAO,CAAC;AACxB,aAAO;AAAA,IACX;AAAA,EACJ;AACJ;",
   "names": []
 }

package/dist/esm/common/index.d.ts

@@ -5,5 +5,6 @@
  */
 export * from "./ProductDescription.js";
 export * from "./StatusCode.js";
+export * from "./StatusResponseError.js";
 export * from "./ValidationError.js";
 //# sourceMappingURL=index.d.ts.map

package/dist/esm/common/index.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/common/index.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,cAAc,yBAAyB,CAAC;AACxC,cAAc,iBAAiB,CAAC;AAChC,cAAc,sBAAsB,CAAC"}
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/common/index.ts"],"names":[],"mappings":"AAAA;;;;GAIG;AAEH,cAAc,yBAAyB,CAAC;AACxC,cAAc,iBAAiB,CAAC;AAChC,cAAc,0BAA0B,CAAC;AACzC,cAAc,sBAAsB,CAAC"}

package/dist/esm/common/index.js

@@ -5,5 +5,6 @@
  */
 export * from "./ProductDescription.js";
 export * from "./StatusCode.js";
+export * from "./StatusResponseError.js";
 export * from "./ValidationError.js";
 //# sourceMappingURL=index.js.map

package/dist/esm/common/index.js.map

@@ -1,6 +1,6 @@
 {
   "version": 3,
   "sources": ["../../../src/common/index.ts"],
-  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,cAAc;AACd,cAAc;AACd,cAAc;",
+  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAMA,cAAc;AACd,cAAc;AACd,cAAc;AACd,cAAc;",
   "names": []
 }

package/dist/esm/globals/AtomicAttributeStatus.d.ts

@@ -8,26 +8,26 @@ import { TypeFromSchema } from "../tlv/TlvSchema.js";
 /**
  * This struct indicates the status of an attribute during an atomic write.
  *
- * @see {@link MatterSpecification.v14.Core} § 7.15.5
+ * @see {@link MatterSpecification.v141.Core} § 7.15.5
  */
 export declare const TlvAtomicAttributeStatus: import("../tlv/TlvObject.js").ObjectSchema<{
     /**
      * This field shall indicate the ID of the attribute with the associated StatusCode.
      *
-     * @see {@link MatterSpecification.v14.Core} § 7.15.5.1
+     * @see {@link MatterSpecification.v141.Core} § 7.15.5.1
      */
     attributeId: import("../tlv/TlvObject.js").FieldType<import("../datatype/AttributeId.js").AttributeId>;
     /**
      * This field shall indicate the atomic status of an attribute.
      *
-     * @see {@link MatterSpecification.v14.Core} § 7.15.5.2
+     * @see {@link MatterSpecification.v141.Core} § 7.15.5.2
      */
     statusCode: import("../tlv/TlvObject.js").FieldType<Status>;
 }>;
 /**
  * This struct indicates the status of an attribute during an atomic write.
  *
- * @see {@link MatterSpecification.v14.Core} § 7.15.5
+ * @see {@link MatterSpecification.v141.Core} § 7.15.5
  */
 export interface AtomicAttributeStatus extends TypeFromSchema<typeof TlvAtomicAttributeStatus> {
 }