@matter/types 0.14.0-alpha.0-20250531-7ed2d6da8 → 0.14.0-alpha.0-20250602-37f27bb02

package/dist/esm/clusters/energy-evse.js

@@ -49,7 +49,7 @@ var EnergyEvse;
      * A value in the past in this field shall disable the EVSE discharging whereas a null value shall enable EVSE
      * discharging permanently.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.3.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.3.1
      */
     dischargingEnabledUntil: TlvField(0, TlvNullable(TlvEpochS)),
     /**
@@ -57,7 +57,7 @@ var EnergyEvse;
      * limit can be advertised to an EV in 0.6A steps. The value of the MaximumDischargeCurrent attribute shall be
      * stored and persisted across reboots by the EVSE to the value of this field.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.3.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.3.2
      */
     maximumDischargeCurrent: TlvField(1, TlvInt64.bound({ min: 0 }))
   });
@@ -115,7 +115,7 @@ var EnergyEvse;
      * that the EVSE may need to begin charging immediately, and may not be able to guarantee that the vehicle will
      * be able to reach the target.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.7.6.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.7.6.1
      */
     targetTimeMinutesPastMidnight: TlvField(0, TlvUInt16.bound({ max: 1439 })),
     /**
@@ -140,7 +140,7 @@ var EnergyEvse;
      *   • if the AddedEnergy field has not been provided, the EVSE SHOULD assume the vehicle is empty and charge
      *     until the vehicle stops demanding a charge.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.7.6.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.7.6.2
      */
     targetSoC: TlvOptionalField(1, TlvPercent),
     /**
@@ -163,7 +163,7 @@ var EnergyEvse;
      *   the Battery Capacity of the vehicle, since the EV may also require energy for heating and cooling of the
      *   battery during charging, or for heating or cooling the cabin.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.7.6.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.7.6.3
      */
     addedEnergy: TlvOptionalField(2, TlvInt64.bound({ min: 0 }))
   });
@@ -172,13 +172,13 @@ var EnergyEvse;
      * This field shall indicate the days of the week that the charging targets SHOULD be associated to. This field
      * is a bitmap and therefore the associated targets could be applied to multiple days.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.7.8
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.7.8
      */
     dayOfWeekForSequence: TlvField(0, TlvBitmap(TlvUInt8, EnergyEvse2.TargetDayOfWeek)),
     /**
      * This field shall indicate a list of up to 10 charging targets for each of the associated days of the week.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.7.9
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.7.9
      */
     chargingTargets: TlvField(1, TlvArray(EnergyEvse2.TlvChargingTarget, { maxLength: 10 }))
   });
@@ -188,7 +188,7 @@ var EnergyEvse;
      * days of the week. Each of the days of the week may only be included in a single ChargingTargetSchedule within
      * this list field.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.5.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.5.1
      */
     chargingTargetSchedules: TlvField(0, TlvArray(EnergyEvse2.TlvChargingTargetSchedule, { maxLength: 7 }))
   });
@@ -197,7 +197,7 @@ var EnergyEvse;
      * This field shall indicate a list of up to 7 sets of daily charging targets together with their associated
      * days of the week.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.7.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.7.1
      */
     chargingTargetSchedules: TlvField(0, TlvArray(EnergyEvse2.TlvChargingTargetSchedule, { maxLength: 7 }))
   });
@@ -205,7 +205,7 @@ var EnergyEvse;
     /**
      * The UID field (ISO 14443A UID) is either 4, 7 or 10 bytes.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.6.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.6.1
      */
     uid: TlvField(0, TlvByteString.bound({ maxLength: 10 }))
   });
@@ -255,7 +255,7 @@ var EnergyEvse;
      * A value in the past in this field shall disable the EVSE charging whereas a null value shall enable it
      * permanently.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.2.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.2.1
      */
     chargingEnabledUntil: TlvField(0, TlvNullable(TlvEpochS)),
     /**
@@ -265,7 +265,7 @@ var EnergyEvse;
      * The value of the MinimumChargeCurrent attribute shall be set to the value of this field (see
      * MinimumChargeCurrent attribute for further details).
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.2.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.2.2
      */
     minimumChargeCurrent: TlvField(1, TlvInt64.bound({ min: 0 })),
     /**
@@ -276,7 +276,7 @@ var EnergyEvse;
      * attribute. For example, if the UserMaximumChargeCurrent attribute is adjusted below then this value, and then
      * later adjusted above this value, the resulting MaximumChargeCurrent attribute will be limited to this value.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.2.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.2.3
      */
     maximumChargeCurrent: TlvField(2, TlvInt64.bound({ min: 0 }))
   });
@@ -284,7 +284,7 @@ var EnergyEvse;
     /**
      * This is the new session ID created after the vehicle is plugged in.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.1.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.1.1
      */
     sessionId: TlvField(0, TlvUInt32)
   });
@@ -292,20 +292,20 @@ var EnergyEvse;
     /**
      * This field shall indicate the current value of the SessionID attribute.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.2.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.2.1
      */
     sessionId: TlvField(0, TlvUInt32),
     /**
      * This field shall indicate the value of the State attribute prior to the EV not being detected.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.2.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.2.2
      */
     state: TlvField(1, TlvEnum()),
     /**
      * This field shall indicate the total duration of the session, from the start of the session when the EV was
      * plugged in, until it was unplugged.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.2.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.2.3
      */
     sessionDuration: TlvField(2, TlvUInt32),
     /**
@@ -314,7 +314,7 @@ var EnergyEvse;
      * Note that if bi-directional charging occurs during the session, then this value shall only include the sum of
      * energy transferred from the EVSE to the EV, and shall NOT be a net value of charging and discharging energy.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.2.4
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.2.4
      */
     sessionEnergyCharged: TlvField(3, TlvInt64.bound({ min: 0 })),
     /**
@@ -324,7 +324,7 @@ var EnergyEvse;
      * of energy transferred from the EV to the EVSE, and shall NOT be a net value of charging and discharging
      * energy.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.2.5
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.2.5
      */
     sessionEnergyDischarged: TlvOptionalField(4, TlvInt64.bound({ min: 0 }))
   });
@@ -332,13 +332,13 @@ var EnergyEvse;
     /**
      * This field shall indicate the value of the SessionID attribute at the time the event was generated.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.3.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.3.1
      */
     sessionId: TlvField(0, TlvUInt32),
     /**
      * This field shall indicate the value of the State attribute at the time the event was generated.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.3.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.3.2
      */
     state: TlvField(1, TlvEnum()),
     /**
@@ -347,7 +347,7 @@ var EnergyEvse;
      * A non-zero value indicates that the EV has been enabled for charging and the value is taken directly from the
      * MaximumChargeCurrent attribute. A zero value indicates that the EV has not been enabled for charging.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.3.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.3.3
      */
     maximumCurrent: TlvField(2, TlvInt64.bound({ min: 0 })),
     /**
@@ -357,7 +357,7 @@ var EnergyEvse;
      * the MaximumDischargeCurrent attribute. A zero value indicates that the EV has not been enabled for
      * discharging.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.3.4
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.3.4
      */
     maximumDischargeCurrent: TlvOptionalField(3, TlvInt64.bound({ min: 0 }))
   });
@@ -371,33 +371,33 @@ var EnergyEvse;
     /**
      * This field shall indicate the value of the SessionID attribute prior to the energy transfer stopping.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.4.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.4.1
      */
     sessionId: TlvField(0, TlvUInt32),
     /**
      * This field shall indicate the value of the State attribute prior to the energy transfer stopping.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.4.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.4.2
      */
     state: TlvField(1, TlvEnum()),
     /**
      * This field shall indicate the reason why the energy transferred stopped.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.4.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.4.3
      */
     reason: TlvField(2, TlvEnum()),
     /**
      * This field shall indicate the amount of energy transferred from the EVSE to the EV since the previous
      * EnergyTransferStarted event, in mWh.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.4.4
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.4.4
      */
     energyTransferred: TlvField(4, TlvInt64.bound({ min: 0 })),
     /**
      * This field shall indicate the amount of energy transferred from the EV to the EVSE since the previous
      * EnergyTransferStarted event, in mWh.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.4.5
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.4.5
      */
     energyDischarged: TlvOptionalField(5, TlvInt64.bound({ min: 0 }))
   });
@@ -406,25 +406,25 @@ var EnergyEvse;
      * This field shall indicate the value of the SessionID attribute prior to the Fault State being changed. A
      * value of null indicates no sessions have occurred before the fault occurred.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.5.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.5.1
      */
     sessionId: TlvField(0, TlvNullable(TlvUInt32)),
     /**
      * This field shall indicate the value of the State attribute prior to the Fault State being changed.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.5.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.5.2
      */
     state: TlvField(1, TlvEnum()),
     /**
      * This field shall indicate the value of the FaultState attribute prior to the Fault State being changed.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.5.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.5.3
      */
     faultStatePreviousState: TlvField(2, TlvEnum()),
     /**
      * This field shall indicate the current value of the FaultState attribute.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.5.4
+     * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.5.4
      */
     faultStateCurrentState: TlvField(4, TlvEnum())
   });
@@ -441,7 +441,7 @@ var EnergyEvse;
        * This attribute shall be persisted, for example a temporary power failure should not stop the vehicle from
        * being discharged.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.5
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.5
        */
       dischargingEnabledUntil: Attribute(4, TlvNullable(TlvEpochS), { persistent: true, default: 0 }),
       /**
@@ -456,11 +456,11 @@ var EnergyEvse;
        *
        *   • MaximumDischargeCurrent field in the EnableDischarging command
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.9
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.9
        */
       maximumDischargeCurrent: Attribute(8, TlvInt64.bound({ min: 0 }), { persistent: true, default: 0 }),
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8
        */
       sessionEnergyDischarged: Attribute(
         67,
@@ -473,7 +473,7 @@ var EnergyEvse;
        * Upon receipt, this shall allow a client to enable the discharge of an EV, and to provide or update the
        * maximum discharge current.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.3
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.3
        */
       enableDischarging: Command(3, EnergyEvse2.TlvEnableDischargingRequest, 3, TlvNoResponse, { timed: true })
     }
@@ -488,7 +488,7 @@ var EnergyEvse;
        * Manual mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is
        * enabled.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.12
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.12
        */
       nextChargeStartTime: Attribute(35, TlvNullable(TlvEpochS), { default: null }),
       /**
@@ -499,7 +499,7 @@ var EnergyEvse;
        * Manual mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is
        * enabled.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.13
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.13
        */
       nextChargeTargetTime: Attribute(36, TlvNullable(TlvEpochS), { default: null }),
       /**
@@ -510,7 +510,7 @@ var EnergyEvse;
        * Manual mode tag), or that the vehicle is not plugged in with the SupplyState indicating that charging is
        * enabled, or that the next ChargingTargetStruct is using the TargetSoC value to charge the vehicle.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.14
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.14
        */
       nextChargeRequiredEnergy: Attribute(37, TlvNullable(TlvInt64.bound({ min: 0 })), { default: null }),
       /**
@@ -522,7 +522,7 @@ var EnergyEvse;
        *
        * If the SOC feature is not supported, only the values null and 100% are supported.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.15
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.15
        */
       nextChargeTargetSoC: Attribute(38, TlvNullable(TlvPercent), { default: null }),
       /**
@@ -555,7 +555,7 @@ var EnergyEvse;
        *
        * = 29.82 Miles
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.16
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.16
        */
       approximateEvEfficiency: OptionalWritableAttribute(
         39,
@@ -567,19 +567,19 @@ var EnergyEvse;
       /**
        * Allows a client to set the user specified charging targets.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.5
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.5
        */
       setTargets: Command(5, EnergyEvse2.TlvSetTargetsRequest, 5, TlvNoResponse, { timed: true }),
       /**
        * Allows a client to retrieve the current set of charging targets.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.6
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.6
        */
       getTargets: Command(6, TlvNoArguments, 0, EnergyEvse2.TlvGetTargetsResponse, { timed: true }),
       /**
        * Allows a client to clear all stored charging targets.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.8
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.8
        */
       clearTargets: Command(7, TlvNoArguments, 7, TlvNoResponse, { timed: true })
     }
@@ -592,13 +592,13 @@ var EnergyEvse;
        * the SOC feature. If the StateOfCharge cannot be read from the vehicle it shall be returned with a NULL
        * value.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.17
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.17
        */
       stateOfCharge: Attribute(48, TlvNullable(TlvPercent), { default: null }),
       /**
        * Indicates the capacity of the EV battery in mWh. This value is always positive.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.18
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.18
        */
       batteryCapacity: Attribute(49, TlvNullable(TlvInt64.bound({ min: 0 })), { default: null })
     }
@@ -612,7 +612,7 @@ var EnergyEvse;
        * The field may be based on the e-Mobility Account Identifier (EMAID). A null value shall indicate that
        * this is unknown.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.19
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.19
        */
       vehicleId: Attribute(50, TlvNullable(TlvString.bound({ maxLength: 32 })), { default: null })
     }
@@ -623,7 +623,7 @@ var EnergyEvse;
        * This event shall be generated when a RFID card has been read. This allows a controller to register the
        * card ID and use this to authenticate and start the charging session.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.6
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.6
        */
       rfid: OptionalEvent(5, EventPriority.Info, EnergyEvse2.TlvRfidEvent)
     }
@@ -655,7 +655,7 @@ var EnergyEvse;
        *
        * See the Device Energy Management Cluster for more details.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.4.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.4.1
        */
       chargingPreferences: BitFlag(0),
       /**
@@ -669,7 +669,7 @@ var EnergyEvse;
        * Note some EVSEs may use other undefined mechanisms to obtain vehicle State of Charge outside the scope of
        * this cluster.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.4.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.4.2
        */
       soCReporting: BitFlag(1),
       /**
@@ -679,7 +679,7 @@ var EnergyEvse;
        *
        * If the EVSE supports the Plug and Charge feature, it will only work if a compatible EV is connected.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.4.3
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.4.3
        */
       plugAndCharge: BitFlag(2),
       /**
@@ -691,7 +691,7 @@ var EnergyEvse;
        * subscribed to by the EVSE Management cluster client. This client may use this to enable the EV to charge
        * or discharge. The lookup and authorization of RIFD UID is outside the scope of this cluster.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.4.4
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.4.4
        */
       rfid: BitFlag(3),
       /**
@@ -704,7 +704,7 @@ var EnergyEvse;
        * to minimise the energy flow from/to the grid as the demand in the home and the solar supply to the home
        * both fluctuate.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.4.5
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.4.5
        */
       v2X: BitFlag(4)
     },
@@ -724,13 +724,13 @@ var EnergyEvse;
        * The Fault state is used to indicate that the FaultState attribute is not NoError. A null value shall
        * indicate that the state cannot be determined.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.1
        */
       state: Attribute(0, TlvNullable(TlvEnum())),
       /**
        * Indicates whether the EV is currently allowed to charge from or discharge to the EVSE.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.2
        */
       supplyState: Attribute(1, TlvEnum()),
       /**
@@ -740,7 +740,7 @@ var EnergyEvse;
        * listed in FaultStateEnum, except NoError. For all values of SupplyState other than DisabledError, the
        * FaultState attribute shall be NoError.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.3
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.3
        */
       faultState: Attribute(2, TlvEnum()),
       /**
@@ -754,7 +754,7 @@ var EnergyEvse;
        * This attribute shall be persisted, for example a temporary power failure should not stop the vehicle from
        * being charged.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.4
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.4
        */
       chargingEnabledUntil: Attribute(3, TlvNullable(TlvEpochS), { persistent: true, default: 0 }),
       /**
@@ -762,14 +762,14 @@ var EnergyEvse;
        * allow implementation of a self-managed network of EVSEs. It is assumed that the device will allow the
        * setting of such values by an installer.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.6
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.6
        */
       circuitCapacity: Attribute(5, TlvInt64.bound({ min: 0 }), { persistent: true, default: 0 }),
       /**
        * Indicates the minimum current that can be delivered by the EVSE to the EV. The attribute can be set using
        * the EnableCharging command.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.7
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.7
        */
       minimumChargeCurrent: Attribute(6, TlvInt64.bound({ min: 0 }), { persistent: true, default: 6e3 }),
       /**
@@ -792,7 +792,7 @@ var EnergyEvse;
        *
        *   • UserMaximumChargeCurrent attribute
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.8
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.8
        */
       maximumChargeCurrent: Attribute(7, TlvInt64.bound({ min: 0 }), { persistent: true, default: 0 }),
       /**
@@ -809,7 +809,7 @@ var EnergyEvse;
        * Its default value SHOULD be initialized to the same as the CircuitCapacity attribute. This value shall be
        * persisted across reboots to ensure it does not cause charging issues during temporary power failures.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.10
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.10
        */
       userMaximumChargeCurrent: OptionalWritableAttribute(
         9,
@@ -827,7 +827,7 @@ var EnergyEvse;
        * energy starting at 00:30, then the EVSE must compute a random delay between 0-599s and add this to its
        * initial planned start time.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8.11
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8.11
        */
       randomizationDelayWindow: OptionalWritableAttribute(
         10,
@@ -835,15 +835,15 @@ var EnergyEvse;
         { persistent: true, default: 600, writeAcl: AccessLevel.Manage }
       ),
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8
        */
       sessionId: Attribute(64, TlvNullable(TlvUInt32), { persistent: true, default: null }),
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8
        */
       sessionDuration: Attribute(65, TlvNullable(TlvUInt32), { persistent: true, default: null }),
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.8
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.8
        */
       sessionEnergyCharged: Attribute(
         66,
@@ -855,20 +855,20 @@ var EnergyEvse;
       /**
        * Allows a client to disable the EVSE from charging and discharging.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.1
        */
       disable: Command(1, TlvNoArguments, 1, TlvNoResponse, { timed: true }),
       /**
        * This command allows a client to enable the EVSE to charge an EV, and to provide or update the maximum and
        * minimum charge current.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.2
        */
       enableCharging: Command(2, EnergyEvse2.TlvEnableChargingRequest, 2, TlvNoResponse, { timed: true }),
       /**
        * Allows a client to put the EVSE into a self-diagnostics mode.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.9.4
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.9.4
        */
       startDiagnostics: OptionalCommand(4, TlvNoArguments, 4, TlvNoResponse, { timed: true })
     },
@@ -876,14 +876,14 @@ var EnergyEvse;
       /**
        * This event shall be generated when the EV is plugged in.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.1
        */
       evConnected: Event(0, EventPriority.Info, EnergyEvse2.TlvEvConnectedEvent),
       /**
        * This event shall be generated when the EV is unplugged or not detected (having been previously plugged
        * in). When the vehicle is unplugged then the session is ended.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.2
        */
       evNotDetected: Event(1, EventPriority.Info, EnergyEvse2.TlvEvNotDetectedEvent),
       /**
@@ -891,7 +891,7 @@ var EnergyEvse;
        * switched between charging and discharging under the control of the PowerAdjustment feature of the Device
        * Energy Management cluster of the associated Device Energy Management device.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.3
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.3
        */
       energyTransferStarted: Event(2, EventPriority.Info, EnergyEvse2.TlvEnergyTransferStartedEvent),
       /**
@@ -899,7 +899,7 @@ var EnergyEvse;
        * switched between charging and discharging under the control of the PowerAdjustment feature of the Device
        * Energy Management cluster of the associated Device Energy Management device.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.4
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.4
        */
       energyTransferStopped: Event(3, EventPriority.Info, EnergyEvse2.TlvEnergyTransferStoppedEvent),
       /**
@@ -913,7 +913,7 @@ var EnergyEvse;
        * cleared, the EVSE device shall set the FaultState attribute to NoError and the SupplyState attribute
        * shall be set back to its previous state.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.3.10.5
+       * @see {@link MatterSpecification.v141.Cluster} § 9.3.10.5
        */
       fault: Event(4, EventPriority.Critical, EnergyEvse2.TlvFaultEvent)
     },