@matter/types 0.14.0-alpha.0-20250531-7ed2d6da8 → 0.14.0-alpha.0-20250602-37f27bb02

package/dist/esm/clusters/water-heater-management.js

@@ -59,7 +59,7 @@ var WaterHeaterManagement;
     /**
      * This field shall indicate the time period, in seconds, for which the boost state is activated.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.5.6.3.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.5.6.3.1
      */
     duration: TlvField(0, TlvUInt32.bound({ min: 1 })),
     /**
@@ -72,7 +72,7 @@ var WaterHeaterManagement;
      *
      *   • the TargetPercentage (if specified).
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.5.6.3.2
+     * @see {@link MatterSpecification.v141.Cluster} § 9.5.6.3.2
      */
     oneShot: TlvOptionalField(1, TlvBoolean),
     /**
@@ -81,7 +81,7 @@ var WaterHeaterManagement;
      *
      * The choice of which heat sources are activated is manufacturer specific.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.5.6.3.3
+     * @see {@link MatterSpecification.v141.Cluster} § 9.5.6.3.3
      */
     emergencyBoost: TlvOptionalField(2, TlvBoolean),
     /**
@@ -93,14 +93,14 @@ var WaterHeaterManagement;
      * The value of this field shall be within the constraints of the MinHeatSetpointLimit and MaxHeatSetpointLimit
      * attributes (inclusive), of the thermostat cluster.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.5.6.3.4
+     * @see {@link MatterSpecification.v141.Cluster} § 9.5.6.3.4
      */
     temporarySetpoint: TlvOptionalField(3, TlvInt16),
     /**
      * This field shall indicate the target percentage of hot water in the tank that the TankPercentage attribute
      * must reach before the heating is switched off.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.5.6.3.5
+     * @see {@link MatterSpecification.v141.Cluster} § 9.5.6.3.5
      */
     targetPercentage: TlvOptionalField(4, TlvPercent),
     /**
@@ -114,7 +114,7 @@ var WaterHeaterManagement;
      *
      * This field shall be less than or equal to the TargetPercentage field.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.5.6.3.6
+     * @see {@link MatterSpecification.v141.Cluster} § 9.5.6.3.6
      */
     targetReheat: TlvOptionalField(5, TlvPercent)
   });
@@ -126,7 +126,7 @@ var WaterHeaterManagement;
        * Indicates the volume of water that the hot water tank can hold (in units of Litres). This allows an
        * energy management system to estimate the required heating energy needed to reach the target temperature.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.7.3
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.7.3
        */
       tankVolume: Attribute(2, TlvUInt16, { default: 0 }),
       /**
@@ -168,7 +168,7 @@ var WaterHeaterManagement;
        *   for 1kWh of electrical energy input. The conversion between heat energy and electrical energy is
        *   outside the scope of this cluster.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.7.4
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.7.4
        */
       estimatedHeatRequired: Attribute(3, TlvInt64.bound({ min: 0 }), { default: 0 })
     }
@@ -202,7 +202,7 @@ var WaterHeaterManagement;
        *
        * ### TankPercentage = 50%
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.7.5
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.7.5
        */
       tankPercentage: Attribute(4, TlvPercent, { default: 0 })
     }
@@ -226,14 +226,14 @@ var WaterHeaterManagement;
        * Indicates the heat sources that the water heater can call on for heating. If a bit is set then the water
        * heater supports the corresponding heat source.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.7.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.7.1
        */
       heaterTypes: FixedAttribute(0, TlvBitmap(TlvUInt8, WaterHeaterManagement2.WaterHeaterHeatSource)),
       /**
        * Indicates if the water heater is heating water. If a bit is set then the corresponding heat source is
        * active.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.7.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.7.2
        */
       heatDemand: Attribute(1, TlvBitmap(TlvUInt8, WaterHeaterManagement2.WaterHeaterHeatSource)),
       /**
@@ -241,7 +241,7 @@ var WaterHeaterManagement;
        *
        * See Boost and CancelBoost commands for more details.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.7.6
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.7.6
        */
       boostState: Attribute(5, TlvEnum(), { default: 0 /* Inactive */ })
     },
@@ -249,13 +249,13 @@ var WaterHeaterManagement;
       /**
        * Allows a client to request that the water heater is put into a Boost state.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.8.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.8.1
        */
       boost: Command(0, WaterHeaterManagement2.TlvBoostRequest, 0, TlvNoResponse, { invokeAcl: AccessLevel.Manage }),
       /**
        * Allows a client to cancel an ongoing Boost operation. This command has no payload.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.8.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.8.2
        */
       cancelBoost: Command(1, TlvNoArguments, 1, TlvNoResponse, { invokeAcl: AccessLevel.Manage })
     },
@@ -266,13 +266,13 @@ var WaterHeaterManagement;
        * The corresponding structure fields within the WaterHeaterBoostInfoStruct are copied from the Boost
        * command.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.9.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.9.1
        */
       boostStarted: Event(0, EventPriority.Info, WaterHeaterManagement2.TlvBoostStartedEvent),
       /**
        * This event shall be generated whenever the BoostState transitions from Active to Inactive.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.5.9.2
+       * @see {@link MatterSpecification.v141.Cluster} § 9.5.9.2
        */
       boostEnded: Event(1, EventPriority.Info, TlvNoArguments)
     },

package/dist/esm/clusters/water-heater-mode.d.ts

@@ -14,7 +14,7 @@ export declare namespace WaterHeaterMode {
     /**
      * These are optional features supported by WaterHeaterModeCluster.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.6.4
+     * @see {@link MatterSpecification.v141.Cluster} § 9.6.4
      */
     enum Feature {
         /**
@@ -26,70 +26,70 @@ export declare namespace WaterHeaterMode {
     }
     enum ModeTag {
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Auto = 0,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Quick = 1,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Quiet = 2,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         LowNoise = 3,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         LowEnergy = 4,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Vacation = 5,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Min = 6,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Max = 7,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Night = 8,
         /**
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1
          */
         Day = 9,
         /**
          * While in modes with this tag, the device will not attempt to keep the water warm.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1.1
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1.1
          */
         Off = 16384,
         /**
          * While in modes with this tag, the device will attempt to keep the water warm based on the
          * OccupiedHeatingSetpoint attribute of the associated Thermostat cluster.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1.2
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1.2
          */
         Manual = 16385,
         /**
          * While in modes with this tag, the device will attempt to keep the water warm based on the Schedules attribute
          * of the associated Thermostat cluster.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 9.6.7.1.3
+         * @see {@link MatterSpecification.v141.Cluster} § 9.6.7.1.3
          */
         Timed = 16386
     }
     /**
      * A Mode Tag is meant to be interpreted by the client for the purpose the cluster serves.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1
      */
     const TlvModeTagStruct: import("../tlv/TlvObject.js").ObjectSchema<{
         /**
@@ -103,21 +103,21 @@ export declare namespace WaterHeaterMode {
          * whose purpose is to choose the amount of sugar, or in a cluster whose purpose is to choose the amount of
          * salt.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.1
+         * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.1
          */
         mfgCode: import("../tlv/TlvObject.js").OptionalFieldType<import("../datatype/VendorId.js").VendorId>;
         /**
          * This field shall indicate the mode tag within a mode tag namespace which is either manufacturer specific or
          * standard.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.2
+         * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.2
          */
         value: import("../tlv/TlvObject.js").FieldType<ModeBase.ModeTag | ModeTag>;
     }>;
     /**
      * A Mode Tag is meant to be interpreted by the client for the purpose the cluster serves.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1
      */
     interface ModeTagStruct extends TypeFromSchema<typeof TlvModeTagStruct> {
     }
@@ -125,7 +125,7 @@ export declare namespace WaterHeaterMode {
      * The table below lists the changes relative to the Mode Base cluster for the fields of the ModeOptionStruct type.
      * A blank field indicates no change.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.6.5.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.6.5.1
      */
     const TlvModeOption: import("../tlv/TlvObject.js").ObjectSchema<{
         /**
@@ -133,13 +133,13 @@ export declare namespace WaterHeaterMode {
          * the user to indicate what this option means. This field is meant to be readable and understandable by the
          * user.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.1
+         * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.1
          */
         label: import("../tlv/TlvObject.js").FieldType<string>;
         /**
          * This field is used to identify the mode option.
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.2
+         * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.2
          */
         mode: import("../tlv/TlvObject.js").FieldType<number>;
         /**
@@ -175,7 +175,7 @@ export declare namespace WaterHeaterMode {
          *   • A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
          *     RVC Clean cluster that is a derivation of this cluster).
          *
-         * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.3
+         * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.3
          */
         modeTags: import("../tlv/TlvObject.js").FieldType<import("../tlv/TlvObject.js").TypeFromFields<{
             /**
@@ -189,14 +189,14 @@ export declare namespace WaterHeaterMode {
              * whose purpose is to choose the amount of sugar, or in a cluster whose purpose is to choose the amount of
              * salt.
              *
-             * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.1
+             * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.1
              */
             mfgCode: import("../tlv/TlvObject.js").OptionalFieldType<import("../datatype/VendorId.js").VendorId>;
             /**
              * This field shall indicate the mode tag within a mode tag namespace which is either manufacturer specific or
              * standard.
              *
-             * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.2
+             * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.2
              */
             value: import("../tlv/TlvObject.js").FieldType<ModeBase.ModeTag | ModeTag>;
         }>[]>;
@@ -205,7 +205,7 @@ export declare namespace WaterHeaterMode {
      * The table below lists the changes relative to the Mode Base cluster for the fields of the ModeOptionStruct type.
      * A blank field indicates no change.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.6.5.1
+     * @see {@link MatterSpecification.v141.Cluster} § 9.6.5.1
      */
     interface ModeOption extends TypeFromSchema<typeof TlvModeOption> {
     }
@@ -233,7 +233,7 @@ export declare namespace WaterHeaterMode {
              * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
              * include an additional instance of any one of these tag types.
              *
-             * @see {@link MatterSpecification.v14.Cluster} § 9.6.6.1
+             * @see {@link MatterSpecification.v141.Cluster} § 9.6.6.1
              */
             readonly supportedModes: FixedAttribute<import("../tlv/TlvObject.js").TypeFromFields<{
                 /**
@@ -241,13 +241,13 @@ export declare namespace WaterHeaterMode {
                  * the user to indicate what this option means. This field is meant to be readable and understandable by the
                  * user.
                  *
-                 * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.1
+                 * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.1
                  */
                 label: import("../tlv/TlvObject.js").FieldType<string>;
                 /**
                  * This field is used to identify the mode option.
                  *
-                 * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.2
+                 * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.2
                  */
                 mode: import("../tlv/TlvObject.js").FieldType<number>;
                 /**
@@ -283,7 +283,7 @@ export declare namespace WaterHeaterMode {
                  *   • A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
                  *     RVC Clean cluster that is a derivation of this cluster).
                  *
-                 * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.3
+                 * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.3
                  */
                 modeTags: import("../tlv/TlvObject.js").FieldType<import("../tlv/TlvObject.js").TypeFromFields<{
                     /**
@@ -297,20 +297,20 @@ export declare namespace WaterHeaterMode {
                      * whose purpose is to choose the amount of sugar, or in a cluster whose purpose is to choose the amount of
                      * salt.
                      *
-                     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.1
+                     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.1
                      */
                     mfgCode: import("../tlv/TlvObject.js").OptionalFieldType<import("../datatype/VendorId.js").VendorId>;
                     /**
                      * This field shall indicate the mode tag within a mode tag namespace which is either manufacturer specific or
                      * standard.
                      *
-                     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.2
+                     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.2
                      */
                     value: import("../tlv/TlvObject.js").FieldType<ModeBase.ModeTag | ModeTag>;
                 }>[]>;
             }>[], any>;
             /**
-             * @see {@link MatterSpecification.v14.Cluster} § 9.6.6
+             * @see {@link MatterSpecification.v141.Cluster} § 9.6.6
              */
             readonly currentMode: Attribute<number, any>;
         };
@@ -320,7 +320,7 @@ export declare namespace WaterHeaterMode {
              *
              * On receipt of this command the device shall respond with a ChangeToModeResponse command.
              *
-             * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.1
+             * @see {@link MatterSpecification.v141.Cluster} § 1.10.7.1
              */
             readonly changeToMode: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 newMode: import("../tlv/TlvObject.js").FieldType<number>;
@@ -364,7 +364,7 @@ export declare namespace WaterHeaterMode {
              * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
              * include an additional instance of any one of these tag types.
              *
-             * @see {@link MatterSpecification.v14.Cluster} § 9.6.6.1
+             * @see {@link MatterSpecification.v141.Cluster} § 9.6.6.1
              */
             readonly supportedModes: FixedAttribute<import("../tlv/TlvObject.js").TypeFromFields<{
                 /**
@@ -372,13 +372,13 @@ export declare namespace WaterHeaterMode {
                  * the user to indicate what this option means. This field is meant to be readable and understandable by the
                  * user.
                  *
-                 * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.1
+                 * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.1
                  */
                 label: import("../tlv/TlvObject.js").FieldType<string>;
                 /**
                  * This field is used to identify the mode option.
                  *
-                 * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.2
+                 * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.2
                  */
                 mode: import("../tlv/TlvObject.js").FieldType<number>;
                 /**
@@ -414,7 +414,7 @@ export declare namespace WaterHeaterMode {
                  *   • A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
                  *     RVC Clean cluster that is a derivation of this cluster).
                  *
-                 * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.3
+                 * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.3
                  */
                 modeTags: import("../tlv/TlvObject.js").FieldType<import("../tlv/TlvObject.js").TypeFromFields<{
                     /**
@@ -428,20 +428,20 @@ export declare namespace WaterHeaterMode {
                      * whose purpose is to choose the amount of sugar, or in a cluster whose purpose is to choose the amount of
                      * salt.
                      *
-                     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.1
+                     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.1
                      */
                     mfgCode: import("../tlv/TlvObject.js").OptionalFieldType<import("../datatype/VendorId.js").VendorId>;
                     /**
                      * This field shall indicate the mode tag within a mode tag namespace which is either manufacturer specific or
                      * standard.
                      *
-                     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.2
+                     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.2
                      */
                     value: import("../tlv/TlvObject.js").FieldType<ModeBase.ModeTag | ModeTag>;
                 }>[]>;
             }>[], any>;
             /**
-             * @see {@link MatterSpecification.v14.Cluster} § 9.6.6
+             * @see {@link MatterSpecification.v141.Cluster} § 9.6.6
              */
             readonly currentMode: Attribute<number, any>;
         };
@@ -451,7 +451,7 @@ export declare namespace WaterHeaterMode {
              *
              * On receipt of this command the device shall respond with a ChangeToModeResponse command.
              *
-             * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.1
+             * @see {@link MatterSpecification.v141.Cluster} § 1.10.7.1
              */
             readonly changeToMode: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 newMode: import("../tlv/TlvObject.js").FieldType<number>;
@@ -478,7 +478,7 @@ export declare namespace WaterHeaterMode {
      * WaterHeaterModeCluster supports optional features that you can enable with the WaterHeaterModeCluster.with()
      * factory method.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 9.6
+     * @see {@link MatterSpecification.v141.Cluster} § 9.6
      */
     interface Cluster extends Identity<typeof ClusterInstance> {
     }

package/dist/esm/clusters/water-heater-mode.js

@@ -47,14 +47,14 @@ var WaterHeaterMode;
      * whose purpose is to choose the amount of sugar, or in a cluster whose purpose is to choose the amount of
      * salt.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.1
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.1
      */
     mfgCode: TlvOptionalField(0, TlvVendorId),
     /**
      * This field shall indicate the mode tag within a mode tag namespace which is either manufacturer specific or
      * standard.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.1.2
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.1.2
      */
     value: TlvField(1, TlvEnum())
   });
@@ -64,13 +64,13 @@ var WaterHeaterMode;
      * the user to indicate what this option means. This field is meant to be readable and understandable by the
      * user.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.1
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.1
      */
     label: TlvField(0, TlvString.bound({ maxLength: 64 })),
     /**
      * This field is used to identify the mode option.
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.2
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.2
      */
     mode: TlvField(1, TlvUInt8),
     /**
@@ -106,7 +106,7 @@ var WaterHeaterMode;
      *   • A mode that includes both a generic Quick tag (defined here), and Vacuum and Mop tags, (defined in the
      *     RVC Clean cluster that is a derivation of this cluster).
      *
-     * @see {@link MatterSpecification.v14.Cluster} § 1.10.5.2.3
+     * @see {@link MatterSpecification.v141.Cluster} § 1.10.5.2.3
      */
     modeTags: TlvField(2, TlvArray(WaterHeaterMode2.TlvModeTagStruct, { maxLength: 8 }))
   });
@@ -131,7 +131,7 @@ var WaterHeaterMode;
        * An entry in the SupportedModes attribute that includes one of an Off, Manual, or Timed tag shall NOT also
        * include an additional instance of any one of these tag types.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 9.6.6.1
+       * @see {@link MatterSpecification.v141.Cluster} § 9.6.6.1
        */
       supportedModes: FixedAttribute(
         0,
@@ -139,7 +139,7 @@ var WaterHeaterMode;
         { default: [] }
       ),
       /**
-       * @see {@link MatterSpecification.v14.Cluster} § 9.6.6
+       * @see {@link MatterSpecification.v141.Cluster} § 9.6.6
        */
       currentMode: Attribute(1, TlvUInt8, { persistent: true })
     },
@@ -149,7 +149,7 @@ var WaterHeaterMode;
        *
        * On receipt of this command the device shall respond with a ChangeToModeResponse command.
        *
-       * @see {@link MatterSpecification.v14.Cluster} § 1.10.7.1
+       * @see {@link MatterSpecification.v141.Cluster} § 1.10.7.1
        */
       changeToMode: Command(0, ModeBase.TlvChangeToModeRequest, 1, ModeBase.TlvChangeToModeResponse)
     },