@matter/model 0.11.9-alpha.0-20241206-22f233334 → 0.11.9-alpha.0-20241207-b604cfa44

package/src/standard/elements/WindowCovering.ts

@@ -15,368 +15,358 @@ import {
     DatatypeElement as Datatype
 } from "../../elements/index.js";
 
-export const WindowCovering = Cluster({
-    name: "WindowCovering", id: 0x102, classification: "application", pics: "WNCV",
-    details: "The window covering cluster provides an interface for controlling and adjusting automatic window " +
-        "coverings such as drapery motors, automatic shades, curtains and blinds.",
-    xref: { document: "cluster", section: "5.3" },
-
-    children: [
-        Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 5 }),
-
-        Attribute({
-            name: "FeatureMap", id: 0xfffc, type: "FeatureMap",
-            xref: { document: "cluster", section: "5.3.4" },
-
-            children: [
-                Field({
-                    name: "LF", conformance: "O.a+", constraint: "0", description: "Lift",
-                    details: "The Lift feature applies to window coverings that lift up and down (e.g. for a roller shade, Up and " +
-                        "Down is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is " +
-                        "lift Open and Close).",
-                    xref: { document: "cluster", section: "5.3.4.1" }
-                }),
-
-                Field({
-                    name: "TL", conformance: "O.a+", constraint: "1", description: "Tilt",
-                    details: "The Tilt feature applies to window coverings with vertical or horizontal strips.",
-                    xref: { document: "cluster", section: "5.3.4.2" }
-                }),
-                Field({
-                    name: "PA_LF", conformance: "[LF]", constraint: "2", description: "PositionAwareLift",
-                    details: "Position aware lift control is supported."
-                }),
-
-                Field({
-                    name: "ABS", conformance: "O", constraint: "3", description: "AbsolutePosition",
-
-                    details: "The percentage attributes shall indicate the position as a percentage between the " +
-                        "InstalledOpenLimits and InstalledClosedLimits attributes of the window covering starting at the " +
-                        "open (0.00%)." +
-                        "\n" +
-                        "As a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be " +
-                        "supported for new implementations.",
-
-                    xref: { document: "cluster", section: "5.3.4.4" }
-                }),
-
-                Field({
-                    name: "PA_TL", conformance: "[TL]", constraint: "4", description: "PositionAwareTilt",
-                    details: "Position aware tilt control is supported."
-                })
-            ]
-        }),
-
-        Attribute({
-            name: "Type", id: 0x0, type: "TypeEnum", access: "R V", conformance: "M", constraint: "desc",
-            default: 0, quality: "F",
-            details: "This attribute shall identify the type of window covering.",
-            xref: { document: "cluster", section: "5.3.6.2" }
-        }),
-
-        Attribute({
-            name: "PhysicalClosedLimitLift", id: 0x1, type: "uint16", access: "R V",
-            conformance: "[LF & PA_LF & ABS]", default: 0, quality: "F",
-            details: "Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the " +
-                "height of the window covering lift.",
-            xref: { document: "cluster", section: "5.3.6.3" }
-        }),
-
-        Attribute({
-            name: "PhysicalClosedLimitTilt", id: 0x2, type: "uint16", access: "R V",
-            conformance: "[TL & PA_TL & ABS]", default: 0, quality: "F",
-            details: "Indicates the maximum possible encoder position possible (Unit 0.1°, tenths of a degree) to " +
-                "position the angle of the window covering tilt.",
-            xref: { document: "cluster", section: "5.3.6.4" }
-        }),
-
-        Attribute({
-            name: "CurrentPositionLift", id: 0x3, type: "uint16", access: "R V",
-            conformance: "[LF & PA_LF & ABS]", constraint: "installedOpenLimitLift to installedClosedLimitLift",
-            default: null, quality: "X N",
-            details: "Indicates the actual lift position (Unit cm, centimeters) of the window covering from the " +
-                "fully-open position.",
-            xref: { document: "cluster", section: "5.3.6.5" }
-        }),
-
-        Attribute({
-            name: "CurrentPositionTilt", id: 0x4, type: "uint16", access: "R V",
-            conformance: "[TL & PA_TL & ABS]", constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
-            default: null, quality: "X N",
-            details: "Indicates the actual tilt position (Unit 0.1°, tenths of a degree) of the window covering from the " +
-                "fully-open position.",
-            xref: { document: "cluster", section: "5.3.6.6" }
-        }),
-
-        Attribute({
-            name: "NumberOfActuationsLift", id: 0x5, type: "uint16", access: "R V", conformance: "[LF]",
-            default: 0, quality: "N",
-            details: "Indicates the total number of lift/slide actuations applied to the window covering since the device " +
-                "was installed.",
-            xref: { document: "cluster", section: "5.3.6.7" }
-        }),
-
-        Attribute({
-            name: "NumberOfActuationsTilt", id: 0x6, type: "uint16", access: "R V", conformance: "[TL]",
-            default: 0, quality: "N",
-            details: "Indicates the total number of tilt actuations applied to the window covering since the device was " +
-                "installed.",
-            xref: { document: "cluster", section: "5.3.6.8" }
-        }),
-
-        Attribute({
-            name: "ConfigStatus", id: 0x7, type: "ConfigStatusBitmap", access: "R V", conformance: "M",
-            constraint: "desc", quality: "N",
-            details: "This attribute specifies the configuration and status information of the window covering." +
-                "\n" +
-                "To change settings, devices shall write to the Mode attribute. The behavior causing the setting or " +
-                "clearing of each bit is vendor specific.",
-            xref: { document: "cluster", section: "5.3.6.9" }
-        }),
-
-        Attribute({
-            name: "CurrentPositionLiftPercentage", id: 0x8, type: "percent", access: "R V",
-            conformance: "[LF & PA_LF]", default: null, quality: "X N S P",
-            details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute " +
-                "is equal to CurrentPositionLiftPercent100ths attribute divided by 100.",
-            xref: { document: "cluster", section: "5.3.6.12" }
-        }),
-
-        Attribute({
-            name: "CurrentPositionTiltPercentage", id: 0x9, type: "percent", access: "R V",
-            conformance: "[TL & PA_TL]", constraint: "0 to 100", default: null, quality: "X N S P",
-            details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute " +
-                "is equal to CurrentPositionTiltPercent100ths attribute divided by 100.",
-            xref: { document: "cluster", section: "5.3.6.13" }
-        }),
-
-        Attribute({
-            name: "OperationalStatus", id: 0xa, type: "OperationalStatusBitmap", access: "R V",
-            conformance: "M", default: 0, quality: "P",
-            details: "Indicates the currently ongoing operations and applies to all type of devices.",
-            xref: { document: "cluster", section: "5.3.6.16" }
-        }),
-
-        Attribute({
-            name: "TargetPositionLiftPercent100ths", id: 0xb, type: "percent100ths", access: "R V",
-            conformance: "LF & PA_LF", default: null, quality: "X S P",
-            details: "Indicates the position where the window covering lift will go or is moving to as a percentage (Unit " +
-                "0.01%).",
-            xref: { document: "cluster", section: "5.3.6.14" }
-        }),
+export const WindowCovering = Cluster(
+    {
+        name: "WindowCovering", id: 0x102, classification: "application", pics: "WNCV",
+        details: "The window covering cluster provides an interface for controlling and adjusting automatic window " +
+            "coverings such as drapery motors, automatic shades, curtains and blinds.",
+        xref: { document: "cluster", section: "5.3" }
+    },
 
-        Attribute({
-            name: "TargetPositionTiltPercent100ths", id: 0xc, type: "percent100ths", access: "R V",
-            conformance: "TL & PA_TL", default: null, quality: "X S P",
-            details: "Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit " +
-                "0.01%).",
-            xref: { document: "cluster", section: "5.3.6.15" }
-        }),
+    Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 5 }),
 
-        Attribute({
-            name: "EndProductType", id: 0xd, type: "EndProductTypeEnum", access: "R V", conformance: "M",
-            constraint: "desc", default: 0, quality: "F",
-            details: "This attribute SHOULD provide more detail about the product type than can be determined from the " +
-                "main category indicated by the Type attribute." +
-                "\n" +
-                "The table below helps to match the EndProductType attribute with the Type attribute.",
-            xref: { document: "cluster", section: "5.3.6.17" }
-        }),
+    Attribute(
+        { name: "FeatureMap", id: 0xfffc, type: "FeatureMap", xref: { document: "cluster", section: "5.3.4" } },
 
-        Attribute({
-            name: "CurrentPositionLiftPercent100ths", id: 0xe, type: "percent100ths", access: "R V",
-            conformance: "LF & PA_LF", constraint: "0 to 10000", default: null, quality: "X N P",
-            details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals " +
-                "100.00%.",
-            xref: { document: "cluster", section: "5.3.6.10" }
+        Field({
+            name: "LF", conformance: "O.a+", constraint: "0", description: "Lift",
+            details: "The Lift feature applies to window coverings that lift up and down (e.g. for a roller shade, Up and " +
+                "Down is lift Open and Close) or slide left to right (e.g. for a sliding curtain, Left and Right is " +
+                "lift Open and Close).",
+            xref: { document: "cluster", section: "5.3.4.1" }
         }),
 
-        Attribute({
-            name: "CurrentPositionTiltPercent100ths", id: 0xf, type: "percent100ths", access: "R V",
-            conformance: "TL & PA_TL", constraint: "0 to 10000", default: null, quality: "X N P",
-            details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals " +
-                "100.00%.",
-            xref: { document: "cluster", section: "5.3.6.11" }
+        Field({
+            name: "TL", conformance: "O.a+", constraint: "1", description: "Tilt",
+            details: "The Tilt feature applies to window coverings with vertical or horizontal strips.",
+            xref: { document: "cluster", section: "5.3.4.2" }
         }),
-
-        Attribute({
-            name: "InstalledOpenLimitLift", id: 0x10, type: "uint16", access: "R V",
-            conformance: "LF & PA_LF & ABS", constraint: "0 to 65534", default: 0, quality: "N",
-            details: "Indicates the open limit for lifting the window covering whether position (in centimeters) is " +
-                "encoded or timed.",
-            xref: { document: "cluster", section: "5.3.6.18" }
+        Field({
+            name: "PA_LF", conformance: "[LF]", constraint: "2", description: "PositionAwareLift",
+            details: "Position aware lift control is supported."
         }),
 
-        Attribute({
-            name: "InstalledClosedLimitLift", id: 0x11, type: "uint16", access: "R V",
-            conformance: "LF & PA_LF & ABS", constraint: "0 to 65534", default: 65534, quality: "N",
-            details: "Indicates the closed limit for lifting the window covering whether position (in centimeters) is " +
-                "encoded or timed.",
-            xref: { document: "cluster", section: "5.3.6.19" }
-        }),
+        Field({
+            name: "ABS", conformance: "O", constraint: "3", description: "AbsolutePosition",
 
-        Attribute({
-            name: "InstalledOpenLimitTilt", id: 0x12, type: "uint16", access: "R V",
-            conformance: "TL & PA_TL & ABS", constraint: "0 to 65534", default: 0, quality: "N",
-            details: "Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is " +
-                "encoded or timed.",
-            xref: { document: "cluster", section: "5.3.6.20" }
-        }),
-
-        Attribute({
-            name: "InstalledClosedLimitTilt", id: 0x13, type: "uint16", access: "R V",
-            conformance: "TL & PA_TL & ABS", constraint: "0 to 65534", default: 65534, quality: "N",
-            details: "Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) " +
-                "is encoded or timed.",
-            xref: { document: "cluster", section: "5.3.6.21" }
-        }),
-
-        Attribute({
-            name: "VelocityLift", id: 0x14, conformance: "D",
-            xref: { document: "cluster", section: "5.3.6" }
-        }),
-        Attribute({
-            name: "AccelerationTimeLift", id: 0x15, conformance: "D",
-            xref: { document: "cluster", section: "5.3.6" }
-        }),
-        Attribute({
-            name: "DecelerationTimeLift", id: 0x16, conformance: "D",
-            xref: { document: "cluster", section: "5.3.6" }
-        }),
-
-        Attribute({
-            name: "Mode", id: 0x17, type: "ModeBitmap", access: "RW VM", conformance: "M", default: 0,
-            quality: "N",
-
-            details: "The Mode attribute allows configuration of the window covering, such as: reversing the motor " +
-                "direction, placing the window covering into calibration mode, placing the motor into maintenance " +
-                "mode, disabling the network, and disabling status LEDs." +
+            details: "The percentage attributes shall indicate the position as a percentage between the " +
+                "InstalledOpenLimits and InstalledClosedLimits attributes of the window covering starting at the " +
+                "open (0.00%)." +
                 "\n" +
-                "In the case a device does not support or implement a specific mode, e.g. the device has a specific " +
-                "installation method and reversal is not relevant or the device does not include a maintenance mode, " +
-                "any write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits " +
-                "set, must be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.",
-
-            xref: { document: "cluster", section: "5.3.6.22" }
-        }),
-
-        Attribute({
-            name: "IntermediateSetpointsLift", id: 0x18, conformance: "D",
-            xref: { document: "cluster", section: "5.3.6" }
-        }),
-        Attribute({
-            name: "IntermediateSetpointsTilt", id: 0x19, conformance: "D",
-            xref: { document: "cluster", section: "5.3.6" }
-        }),
+                "As a general rule, absolute positioning (in centimeters or tenth of a degrees) SHOULD NOT be " +
+                "supported for new implementations.",
 
-        Attribute({
-            name: "SafetyStatus", id: 0x1a, type: "SafetyStatusBitmap", access: "R V", conformance: "O",
-            constraint: "desc", default: 0, quality: "P",
-            details: "The SafetyStatus attribute reflects the state of the safety sensors and the common issues " +
-                "preventing movements. By default for nominal operation all flags are cleared (0). A device might " +
-                "support none, one or several bit flags from this attribute (all optional).",
-            xref: { document: "cluster", section: "5.3.6.23" }
+            xref: { document: "cluster", section: "5.3.4.4" }
         }),
 
-        Command({
-            name: "UpOrOpen", id: 0x0, access: "O", conformance: "M", direction: "request", response: "status",
-
-            details: "Upon receipt of this command, the window covering will adjust its position so the physical " +
-                "lift/slide and tilt is at the maximum open/up position. This will happen as fast as possible. The " +
-                "server attributes shall be updated as follows:" +
-                "\n" +
-                "if the PositionAware feature is supported:" +
-                "\n" +
-                "  • TargetPositionLiftPercent100ths attribute shall be set to 0.00%." +
-                "\n" +
-                "  • TargetPositionTiltPercent100ths attribute shall be set to 0.00%." +
-                "\n" +
-                "The server positioning attributes will follow the movements, once the movement has successfully " +
-                "finished, the server attributes shall be updated as follows:" +
-                "\n" +
-                "if the PositionAware feature is supported:" +
-                "\n" +
-                "  • CurrentPositionLiftPercent100ths attribute shall be 0.00%." +
-                "\n" +
-                "  • CurrentPositionLiftPercentage attribute shall be 0%." +
-                "\n" +
-                "  • CurrentPositionTiltPercent100ths attribute shall be 0.00%." +
-                "\n" +
-                "  • CurrentPositionTiltPercentage attribute shall be 0%. if the AbsolutePosition feature is " +
-                "    supported:" +
-                "\n" +
-                "  • CurrentPositionLift attribute shall be equal to the InstalledOpenLimitLift attribute." +
-                "\n" +
-                "  • CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.",
-
-            xref: { document: "cluster", section: "5.3.7.1" }
-        }),
-
-        Command({
-            name: "DownOrClose", id: 0x1, access: "O", conformance: "M", direction: "request",
-            response: "status",
-
-            details: "Upon receipt of this command, the window covering will adjust its position so the physical " +
-                "lift/slide and tilt is at the maximum closed/down position. This will happen as fast as possible. " +
-                "The server attributes supported shall be updated as follows:" +
-                "\n" +
-                "if the PositionAware feature is supported:" +
-                "\n" +
-                "  • TargetPositionLiftPercent100ths attribute shall be set to 100.00%." +
-                "\n" +
-                "  • TargetPositionTiltPercent100ths attribute shall be set to 100.00%." +
-                "\n" +
-                "The server positioning attributes will follow the movements, once the movement has successfully " +
-                "finished, the server attributes shall be updated as follows:" +
-                "\n" +
-                "if the PositionAware feature is supported:" +
-                "\n" +
-                "  • CurrentPositionLiftPercent100ths attribute shall be 100.00%." +
-                "\n" +
-                "  • CurrentPositionLiftPercentage attribute shall be 100%." +
-                "\n" +
-                "  • CurrentPositionTiltPercent100ths attribute shall be 100.00%." +
-                "\n" +
-                "  • CurrentPositionTiltPercentage attribute shall be 100%. if the AbsolutePosition feature is " +
-                "    supported:" +
-                "\n" +
-                "  • CurrentPositionLift attribute shall be equal to the InstalledClosedLimitLift attribute." +
-                "\n" +
-                "  • CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.",
-
-            xref: { document: "cluster", section: "5.3.7.2" }
-        }),
-
-        Command({
-            name: "StopMotion", id: 0x2, access: "O", conformance: "M", direction: "request",
-            response: "status",
-
-            details: "Upon receipt of this command, the window covering will stop any adjusting to the physical tilt and " +
-                "lift/slide that is currently occurring. The server attributes supported shall be updated as follows:" +
-                "\n" +
-                "  • TargetPositionLiftPercent100ths attribute will be set to CurrentPositionLiftPercent100ths " +
-                "    attribute value." +
-                "\n" +
-                "  • TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths " +
-                "    attribute value.",
-
-            xref: { document: "cluster", section: "5.3.7.3" }
-        }),
-
-        Command({
+        Field({
+            name: "PA_TL", conformance: "[TL]", constraint: "4", description: "PositionAwareTilt",
+            details: "Position aware tilt control is supported."
+        })
+    ),
+
+    Attribute({
+        name: "Type", id: 0x0, type: "TypeEnum", access: "R V", conformance: "M", constraint: "desc",
+        default: 0, quality: "F",
+        details: "This attribute shall identify the type of window covering.",
+        xref: { document: "cluster", section: "5.3.6.2" }
+    }),
+
+    Attribute({
+        name: "PhysicalClosedLimitLift", id: 0x1, type: "uint16", access: "R V",
+        conformance: "[LF & PA_LF & ABS]", default: 0, quality: "F",
+        details: "Indicates the maximum possible encoder position possible (Unit cm, centimeters) to position the " +
+            "height of the window covering lift.",
+        xref: { document: "cluster", section: "5.3.6.3" }
+    }),
+
+    Attribute({
+        name: "PhysicalClosedLimitTilt", id: 0x2, type: "uint16", access: "R V",
+        conformance: "[TL & PA_TL & ABS]", default: 0, quality: "F",
+        details: "Indicates the maximum possible encoder position possible (Unit 0.1°, tenths of a degree) to " +
+            "position the angle of the window covering tilt.",
+        xref: { document: "cluster", section: "5.3.6.4" }
+    }),
+
+    Attribute({
+        name: "CurrentPositionLift", id: 0x3, type: "uint16", access: "R V",
+        conformance: "[LF & PA_LF & ABS]", constraint: "installedOpenLimitLift to installedClosedLimitLift",
+        default: null, quality: "X N",
+        details: "Indicates the actual lift position (Unit cm, centimeters) of the window covering from the " +
+            "fully-open position.",
+        xref: { document: "cluster", section: "5.3.6.5" }
+    }),
+
+    Attribute({
+        name: "CurrentPositionTilt", id: 0x4, type: "uint16", access: "R V",
+        conformance: "[TL & PA_TL & ABS]", constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
+        default: null, quality: "X N",
+        details: "Indicates the actual tilt position (Unit 0.1°, tenths of a degree) of the window covering from the " +
+            "fully-open position.",
+        xref: { document: "cluster", section: "5.3.6.6" }
+    }),
+
+    Attribute({
+        name: "NumberOfActuationsLift", id: 0x5, type: "uint16", access: "R V", conformance: "[LF]",
+        default: 0, quality: "N",
+        details: "Indicates the total number of lift/slide actuations applied to the window covering since the device " +
+            "was installed.",
+        xref: { document: "cluster", section: "5.3.6.7" }
+    }),
+
+    Attribute({
+        name: "NumberOfActuationsTilt", id: 0x6, type: "uint16", access: "R V", conformance: "[TL]",
+        default: 0, quality: "N",
+        details: "Indicates the total number of tilt actuations applied to the window covering since the device was " +
+            "installed.",
+        xref: { document: "cluster", section: "5.3.6.8" }
+    }),
+
+    Attribute({
+        name: "ConfigStatus", id: 0x7, type: "ConfigStatusBitmap", access: "R V", conformance: "M",
+        constraint: "desc", quality: "N",
+        details: "This attribute specifies the configuration and status information of the window covering." +
+            "\n" +
+            "To change settings, devices shall write to the Mode attribute. The behavior causing the setting or " +
+            "clearing of each bit is vendor specific.",
+        xref: { document: "cluster", section: "5.3.6.9" }
+    }),
+
+    Attribute({
+        name: "CurrentPositionLiftPercentage", id: 0x8, type: "percent", access: "R V",
+        conformance: "[LF & PA_LF]", default: null, quality: "X N S P",
+        details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute " +
+            "is equal to CurrentPositionLiftPercent100ths attribute divided by 100.",
+        xref: { document: "cluster", section: "5.3.6.12" }
+    }),
+
+    Attribute({
+        name: "CurrentPositionTiltPercentage", id: 0x9, type: "percent", access: "R V",
+        conformance: "[TL & PA_TL]", constraint: "0 to 100", default: null, quality: "X N S P",
+        details: "Indicates the actual position as a percentage from 0% to 100% with 1% default step. This attribute " +
+            "is equal to CurrentPositionTiltPercent100ths attribute divided by 100.",
+        xref: { document: "cluster", section: "5.3.6.13" }
+    }),
+
+    Attribute({
+        name: "OperationalStatus", id: 0xa, type: "OperationalStatusBitmap", access: "R V",
+        conformance: "M", default: 0, quality: "P",
+        details: "Indicates the currently ongoing operations and applies to all type of devices.",
+        xref: { document: "cluster", section: "5.3.6.16" }
+    }),
+
+    Attribute({
+        name: "TargetPositionLiftPercent100ths", id: 0xb, type: "percent100ths", access: "R V",
+        conformance: "LF & PA_LF", default: null, quality: "X S P",
+        details: "Indicates the position where the window covering lift will go or is moving to as a percentage (Unit " +
+            "0.01%).",
+        xref: { document: "cluster", section: "5.3.6.14" }
+    }),
+
+    Attribute({
+        name: "TargetPositionTiltPercent100ths", id: 0xc, type: "percent100ths", access: "R V",
+        conformance: "TL & PA_TL", default: null, quality: "X S P",
+        details: "Indicates the position where the window covering tilt will go or is moving to as a percentage (Unit " +
+            "0.01%).",
+        xref: { document: "cluster", section: "5.3.6.15" }
+    }),
+
+    Attribute({
+        name: "EndProductType", id: 0xd, type: "EndProductTypeEnum", access: "R V", conformance: "M",
+        constraint: "desc", default: 0, quality: "F",
+        details: "This attribute SHOULD provide more detail about the product type than can be determined from the " +
+            "main category indicated by the Type attribute." +
+            "\n" +
+            "The table below helps to match the EndProductType attribute with the Type attribute.",
+        xref: { document: "cluster", section: "5.3.6.17" }
+    }),
+
+    Attribute({
+        name: "CurrentPositionLiftPercent100ths", id: 0xe, type: "percent100ths", access: "R V",
+        conformance: "LF & PA_LF", constraint: "0 to 10000", default: null, quality: "X N P",
+        details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals " +
+            "100.00%.",
+        xref: { document: "cluster", section: "5.3.6.10" }
+    }),
+
+    Attribute({
+        name: "CurrentPositionTiltPercent100ths", id: 0xf, type: "percent100ths", access: "R V",
+        conformance: "TL & PA_TL", constraint: "0 to 10000", default: null, quality: "X N P",
+        details: "Indicates the actual position as a percentage with a minimal step of 0.01%. E.g Max 10000 equals " +
+            "100.00%.",
+        xref: { document: "cluster", section: "5.3.6.11" }
+    }),
+
+    Attribute({
+        name: "InstalledOpenLimitLift", id: 0x10, type: "uint16", access: "R V",
+        conformance: "LF & PA_LF & ABS", constraint: "0 to 65534", default: 0, quality: "N",
+        details: "Indicates the open limit for lifting the window covering whether position (in centimeters) is " +
+            "encoded or timed.",
+        xref: { document: "cluster", section: "5.3.6.18" }
+    }),
+
+    Attribute({
+        name: "InstalledClosedLimitLift", id: 0x11, type: "uint16", access: "R V",
+        conformance: "LF & PA_LF & ABS", constraint: "0 to 65534", default: 65534, quality: "N",
+        details: "Indicates the closed limit for lifting the window covering whether position (in centimeters) is " +
+            "encoded or timed.",
+        xref: { document: "cluster", section: "5.3.6.19" }
+    }),
+
+    Attribute({
+        name: "InstalledOpenLimitTilt", id: 0x12, type: "uint16", access: "R V",
+        conformance: "TL & PA_TL & ABS", constraint: "0 to 65534", default: 0, quality: "N",
+        details: "Indicates the open limit for tilting the window covering whether position (in tenth of a degree) is " +
+            "encoded or timed.",
+        xref: { document: "cluster", section: "5.3.6.20" }
+    }),
+
+    Attribute({
+        name: "InstalledClosedLimitTilt", id: 0x13, type: "uint16", access: "R V",
+        conformance: "TL & PA_TL & ABS", constraint: "0 to 65534", default: 65534, quality: "N",
+        details: "Indicates the closed limit for tilting the window covering whether position (in tenth of a degree) " +
+            "is encoded or timed.",
+        xref: { document: "cluster", section: "5.3.6.21" }
+    }),
+
+    Attribute({ name: "VelocityLift", id: 0x14, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }),
+    Attribute(
+        { name: "AccelerationTimeLift", id: 0x15, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }
+    ),
+    Attribute(
+        { name: "DecelerationTimeLift", id: 0x16, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }
+    ),
+
+    Attribute({
+        name: "Mode", id: 0x17, type: "ModeBitmap", access: "RW VM", conformance: "M", default: 0,
+        quality: "N",
+
+        details: "The Mode attribute allows configuration of the window covering, such as: reversing the motor " +
+            "direction, placing the window covering into calibration mode, placing the motor into maintenance " +
+            "mode, disabling the network, and disabling status LEDs." +
+            "\n" +
+            "In the case a device does not support or implement a specific mode, e.g. the device has a specific " +
+            "installation method and reversal is not relevant or the device does not include a maintenance mode, " +
+            "any write interaction to the Mode attribute, with an unsupported mode bit or any out of bounds bits " +
+            "set, must be ignored and a response containing the status of CONSTRAINT_ERROR will be returned.",
+
+        xref: { document: "cluster", section: "5.3.6.22" }
+    }),
+
+    Attribute({ name: "IntermediateSetpointsLift", id: 0x18, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }),
+    Attribute({ name: "IntermediateSetpointsTilt", id: 0x19, conformance: "D", xref: { document: "cluster", section: "5.3.6" } }),
+
+    Attribute({
+        name: "SafetyStatus", id: 0x1a, type: "SafetyStatusBitmap", access: "R V", conformance: "O",
+        constraint: "desc", default: 0, quality: "P",
+        details: "The SafetyStatus attribute reflects the state of the safety sensors and the common issues " +
+            "preventing movements. By default for nominal operation all flags are cleared (0). A device might " +
+            "support none, one or several bit flags from this attribute (all optional).",
+        xref: { document: "cluster", section: "5.3.6.23" }
+    }),
+
+    Command({
+        name: "UpOrOpen", id: 0x0, access: "O", conformance: "M", direction: "request", response: "status",
+
+        details: "Upon receipt of this command, the window covering will adjust its position so the physical " +
+            "lift/slide and tilt is at the maximum open/up position. This will happen as fast as possible. The " +
+            "server attributes shall be updated as follows:" +
+            "\n" +
+            "if the PositionAware feature is supported:" +
+            "\n" +
+            "  • TargetPositionLiftPercent100ths attribute shall be set to 0.00%." +
+            "\n" +
+            "  • TargetPositionTiltPercent100ths attribute shall be set to 0.00%." +
+            "\n" +
+            "The server positioning attributes will follow the movements, once the movement has successfully " +
+            "finished, the server attributes shall be updated as follows:" +
+            "\n" +
+            "if the PositionAware feature is supported:" +
+            "\n" +
+            "  • CurrentPositionLiftPercent100ths attribute shall be 0.00%." +
+            "\n" +
+            "  • CurrentPositionLiftPercentage attribute shall be 0%." +
+            "\n" +
+            "  • CurrentPositionTiltPercent100ths attribute shall be 0.00%." +
+            "\n" +
+            "  • CurrentPositionTiltPercentage attribute shall be 0%. if the AbsolutePosition feature is " +
+            "    supported:" +
+            "\n" +
+            "  • CurrentPositionLift attribute shall be equal to the InstalledOpenLimitLift attribute." +
+            "\n" +
+            "  • CurrentPositionTilt attribute shall be equal to the InstalledOpenLimitTilt attribute.",
+
+        xref: { document: "cluster", section: "5.3.7.1" }
+    }),
+
+    Command({
+        name: "DownOrClose", id: 0x1, access: "O", conformance: "M", direction: "request",
+        response: "status",
+
+        details: "Upon receipt of this command, the window covering will adjust its position so the physical " +
+            "lift/slide and tilt is at the maximum closed/down position. This will happen as fast as possible. " +
+            "The server attributes supported shall be updated as follows:" +
+            "\n" +
+            "if the PositionAware feature is supported:" +
+            "\n" +
+            "  • TargetPositionLiftPercent100ths attribute shall be set to 100.00%." +
+            "\n" +
+            "  • TargetPositionTiltPercent100ths attribute shall be set to 100.00%." +
+            "\n" +
+            "The server positioning attributes will follow the movements, once the movement has successfully " +
+            "finished, the server attributes shall be updated as follows:" +
+            "\n" +
+            "if the PositionAware feature is supported:" +
+            "\n" +
+            "  • CurrentPositionLiftPercent100ths attribute shall be 100.00%." +
+            "\n" +
+            "  • CurrentPositionLiftPercentage attribute shall be 100%." +
+            "\n" +
+            "  • CurrentPositionTiltPercent100ths attribute shall be 100.00%." +
+            "\n" +
+            "  • CurrentPositionTiltPercentage attribute shall be 100%. if the AbsolutePosition feature is " +
+            "    supported:" +
+            "\n" +
+            "  • CurrentPositionLift attribute shall be equal to the InstalledClosedLimitLift attribute." +
+            "\n" +
+            "  • CurrentPositionTilt attribute shall be equal to the InstalledClosedLimitTilt attribute.",
+
+        xref: { document: "cluster", section: "5.3.7.2" }
+    }),
+
+    Command({
+        name: "StopMotion", id: 0x2, access: "O", conformance: "M", direction: "request",
+        response: "status",
+
+        details: "Upon receipt of this command, the window covering will stop any adjusting to the physical tilt and " +
+            "lift/slide that is currently occurring. The server attributes supported shall be updated as follows:" +
+            "\n" +
+            "  • TargetPositionLiftPercent100ths attribute will be set to CurrentPositionLiftPercent100ths " +
+            "    attribute value." +
+            "\n" +
+            "  • TargetPositionTiltPercent100ths attribute will be set to CurrentPositionTiltPercent100ths " +
+            "    attribute value.",
+
+        xref: { document: "cluster", section: "5.3.7.3" }
+    }),
+
+    Command(
+        {
             name: "GoToLiftValue", id: 0x4, access: "O", conformance: "[LF & ABS]", direction: "request",
             response: "status",
-            xref: { document: "cluster", section: "5.3.7.4" },
-
-            children: [Field({
-                name: "LiftValue", id: 0x0, type: "uint16", conformance: "M",
-                constraint: "installedOpenLimitLift to installedClosedLimitLift",
-                details: "This field shall specify the requested physical lift/slide position in unit cm (centimeters).",
-                xref: { document: "cluster", section: "5.3.7.4.1" }
-            })]
-        }),
+            xref: { document: "cluster", section: "5.3.7.4" }
+        },
+
+        Field({
+            name: "LiftValue", id: 0x0, type: "uint16", conformance: "M",
+            constraint: "installedOpenLimitLift to installedClosedLimitLift",
+            details: "This field shall specify the requested physical lift/slide position in unit cm (centimeters).",
+            xref: { document: "cluster", section: "5.3.7.4.1" }
+        })
+    ),
 
-        Command({
+    Command(
+        {
             name: "GoToLiftPercentage", id: 0x5, access: "O", conformance: "LF & PA_LF, [LF]",
             direction: "request", response: "status",
 
@@ -396,31 +386,30 @@ export const WindowCovering = Cluster({
                 "device is only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND " +
                 "status SHOULD be returned.",
 
-            xref: { document: "cluster", section: "5.3.7.5" },
+            xref: { document: "cluster", section: "5.3.7.5" }
+        },
 
-            children: [
-                Field({
-                    name: "LiftPercent100thsValue", id: 0x0, type: "percent100ths", conformance: "M",
-                    constraint: "desc"
-                }),
-                Field({ name: "Ignored", id: 0x1, type: "percent100ths", conformance: "X", constraint: "desc" })
-            ]
-        }),
+        Field({ name: "LiftPercent100thsValue", id: 0x0, type: "percent100ths", conformance: "M", constraint: "desc" }),
+        Field({ name: "Ignored", id: 0x1, type: "percent100ths", conformance: "X", constraint: "desc" })
+    ),
 
-        Command({
+    Command(
+        {
             name: "GoToTiltValue", id: 0x7, access: "O", conformance: "[TL & ABS]", direction: "request",
             response: "status",
-            xref: { document: "cluster", section: "5.3.7.6" },
-
-            children: [Field({
-                name: "TiltValue", id: 0x0, type: "uint16", conformance: "M",
-                constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
-                details: "This field shall specify the requested physical tilt position in unit 0.1° (tenth of a degrees).",
-                xref: { document: "cluster", section: "5.3.7.6.1" }
-            })]
-        }),
+            xref: { document: "cluster", section: "5.3.7.6" }
+        },
+
+        Field({
+            name: "TiltValue", id: 0x0, type: "uint16", conformance: "M",
+            constraint: "installedOpenLimitTilt to installedClosedLimitTilt",
+            details: "This field shall specify the requested physical tilt position in unit 0.1° (tenth of a degrees).",
+            xref: { document: "cluster", section: "5.3.7.6.1" }
+        })
+    ),
 
-        Command({
+    Command(
+        {
             name: "GoToTiltPercentage", id: 0x8, access: "O", conformance: "TL & PA_TL, [TL]",
             direction: "request", response: "status",
 
@@ -440,142 +429,153 @@ export const WindowCovering = Cluster({
                 "device is only a tilt control device, then the command SHOULD be ignored and a UNSUPPORTED_COMMAND " +
                 "status SHOULD be returned.",
 
-            xref: { document: "cluster", section: "5.3.7.7" },
-
-            children: [
-                Field({
-                    name: "TiltPercent100thsValue", id: 0x0, type: "percent100ths", conformance: "M",
-                    constraint: "desc"
-                }),
-                Field({ name: "Ignored", id: 0x1, type: "percent100ths", conformance: "X", constraint: "desc" })
-            ]
-        }),
-
-        Datatype({
-            name: "ConfigStatusBitmap", type: "map8",
-            xref: { document: "cluster", section: "5.3.5.1" },
-
-            children: [
-                Field({
-                    name: "Operational", constraint: "0", description: "Device is operational.",
-                    details: "This bit shall indicate whether the window covering is operational for regular use:" +
-                        "\n" +
-                        "  • 0 = Not Operational" +
-                        "\n" +
-                        "  • 1 = Operational",
-                    xref: { document: "cluster", section: "5.3.5.1.1" }
-                }),
-
-                Field({ name: "OnlineReserved", constraint: "1", description: "Deprecated and reserved." }),
-
-                Field({
-                    name: "LiftMovementReversed", constraint: "2", description: "The lift movement is reversed.",
-                    details: "This bit shall indicate whether the lift movement is reversed:" +
-                        "\n" +
-                        "  • 0 = Lift movement is normal" +
-                        "\n" +
-                        "  • 1 = Lift movement is reversed",
-                    xref: { document: "cluster", section: "5.3.5.1.2" }
-                }),
-
-                Field({
-                    name: "LiftPositionAware", constraint: "3",
-                    description: "Supports the PositionAwareLift feature (PA_LF).",
-                    details: "This bit shall indicate whether the window covering supports the PositionAwareLift feature:" +
-                        "\n" +
-                        "  • 0 = Lift control is not position aware" +
-                        "\n" +
-                        "  • 1 = Lift control is position aware (PA_LF)",
-                    xref: { document: "cluster", section: "5.3.5.1.3" }
-                }),
-
-                Field({
-                    name: "TiltPositionAware", constraint: "4",
-                    description: "Supports the PositionAwareTilt feature (PA_TL).",
-                    details: "This bit shall indicate whether the window covering supports the PositionAwareTilt feature:" +
-                        "\n" +
-                        "  • 0 = Tilt control is not position aware" +
-                        "\n" +
-                        "  • 1 = Tilt control is position aware (PA_TL)",
-                    xref: { document: "cluster", section: "5.3.5.1.4" }
-                }),
-
-                Field({
-                    name: "LiftEncoderControlled", constraint: "5", description: "Uses an encoder for lift.",
-
-                    details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder " +
-                        "for positioning the height of the window covering:" +
-                        "\n" +
-                        "  • 0 = Timer Controlled" +
-                        "\n" +
-                        "  • 1 = Encoder Controlled",
-
-                    xref: { document: "cluster", section: "5.3.5.1.5" }
-                }),
-
-                Field({
-                    name: "TiltEncoderControlled", constraint: "6", description: "Uses an encoder for tilt.",
-
-                    details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder " +
-                        "for tilting the window covering:" +
-                        "\n" +
-                        "  • 0 = Timer Controlled" +
-                        "\n" +
-                        "  • 1 = Encoder Controlled",
-
-                    xref: { document: "cluster", section: "5.3.5.1.6" }
-                })
-            ]
-        }),
-
-        Datatype({
-            name: "ModeBitmap", type: "map8",
-            xref: { document: "cluster", section: "5.3.5.2" },
-
-            children: [
-                Field({
-                    name: "MotorDirectionReversed", constraint: "0", description: "Reverse the lift direction.",
-                    details: "This bit shall control the motor direction:" +
-                        "\n" +
-                        "  • 0 = Lift movement is normal" +
-                        "\n" +
-                        "  • 1 = Lift movement is reversed",
-                    xref: { document: "cluster", section: "5.3.5.2.1" }
-                }),
-
-                Field({
-                    name: "CalibrationMode", constraint: "1", description: "Perform a calibration.",
-                    details: "This bit shall set the window covering into calibration mode:" +
-                        "\n" +
-                        "  • 0 = Normal mode" +
-                        "\n" +
-                        "  • 1 = Calibration mode",
-                    xref: { document: "cluster", section: "5.3.5.2.2" }
-                }),
-
-                Field({
-                    name: "MaintenanceMode", constraint: "2", description: "Freeze all motions for maintenance.",
-                    details: "This bit shall set the window covering into maintenance mode:" +
-                        "\n" +
-                        "  • 0 = Normal mode" +
-                        "\n" +
-                        "  • 1 = Maintenance mode",
-                    xref: { document: "cluster", section: "5.3.5.2.3" }
-                }),
-
-                Field({
-                    name: "LedFeedback", constraint: "3", description: "Control the LEDs feedback.",
-                    details: "This bit shall control feedback LEDs:" +
-                        "\n" +
-                        "  • 0 = LEDs are off" +
-                        "\n" +
-                        "  • 1 = LEDs will display feedback",
-                    xref: { document: "cluster", section: "5.3.5.2.4" }
-                })
-            ]
-        }),
-
-        Datatype({
+            xref: { document: "cluster", section: "5.3.7.7" }
+        },
+
+        Field({ name: "TiltPercent100thsValue", id: 0x0, type: "percent100ths", conformance: "M", constraint: "desc" }),
+        Field({ name: "Ignored", id: 0x1, type: "percent100ths", conformance: "X", constraint: "desc" })
+    ),
+
+    Datatype(
+        { name: "ConfigStatusBitmap", type: "map8", xref: { document: "cluster", section: "5.3.5.1" } },
+
+        Field(
+            {
+                name: "Operational", constraint: "0", description: "Device is operational.",
+                details: "This bit shall indicate whether the window covering is operational for regular use:" +
+                    "\n" +
+                    "  • 0 = Not Operational" +
+                    "\n" +
+                    "  • 1 = Operational",
+                xref: { document: "cluster", section: "5.3.5.1.1" }
+            }
+        ),
+
+        Field({ name: "OnlineReserved", constraint: "1", description: "Deprecated and reserved." }),
+
+        Field(
+            {
+                name: "LiftMovementReversed", constraint: "2", description: "The lift movement is reversed.",
+                details: "This bit shall indicate whether the lift movement is reversed:" +
+                    "\n" +
+                    "  • 0 = Lift movement is normal" +
+                    "\n" +
+                    "  • 1 = Lift movement is reversed",
+                xref: { document: "cluster", section: "5.3.5.1.2" }
+            }
+        ),
+
+        Field(
+            {
+                name: "LiftPositionAware", constraint: "3",
+                description: "Supports the PositionAwareLift feature (PA_LF).",
+                details: "This bit shall indicate whether the window covering supports the PositionAwareLift feature:" +
+                    "\n" +
+                    "  • 0 = Lift control is not position aware" +
+                    "\n" +
+                    "  • 1 = Lift control is position aware (PA_LF)",
+                xref: { document: "cluster", section: "5.3.5.1.3" }
+            }
+        ),
+
+        Field(
+            {
+                name: "TiltPositionAware", constraint: "4",
+                description: "Supports the PositionAwareTilt feature (PA_TL).",
+                details: "This bit shall indicate whether the window covering supports the PositionAwareTilt feature:" +
+                    "\n" +
+                    "  • 0 = Tilt control is not position aware" +
+                    "\n" +
+                    "  • 1 = Tilt control is position aware (PA_TL)",
+                xref: { document: "cluster", section: "5.3.5.1.4" }
+            }
+        ),
+
+        Field(
+            {
+                name: "LiftEncoderControlled", constraint: "5", description: "Uses an encoder for lift.",
+
+                details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder " +
+                    "for positioning the height of the window covering:" +
+                    "\n" +
+                    "  • 0 = Timer Controlled" +
+                    "\n" +
+                    "  • 1 = Encoder Controlled",
+
+                xref: { document: "cluster", section: "5.3.5.1.5" }
+            }
+        ),
+
+        Field(
+            {
+                name: "TiltEncoderControlled", constraint: "6", description: "Uses an encoder for tilt.",
+
+                details: "This bit shall indicate whether a position aware controlled window covering is employing an encoder " +
+                    "for tilting the window covering:" +
+                    "\n" +
+                    "  • 0 = Timer Controlled" +
+                    "\n" +
+                    "  • 1 = Encoder Controlled",
+
+                xref: { document: "cluster", section: "5.3.5.1.6" }
+            }
+        )
+    ),
+
+    Datatype(
+        { name: "ModeBitmap", type: "map8", xref: { document: "cluster", section: "5.3.5.2" } },
+
+        Field(
+            {
+                name: "MotorDirectionReversed", constraint: "0", description: "Reverse the lift direction.",
+                details: "This bit shall control the motor direction:" +
+                    "\n" +
+                    "  • 0 = Lift movement is normal" +
+                    "\n" +
+                    "  • 1 = Lift movement is reversed",
+                xref: { document: "cluster", section: "5.3.5.2.1" }
+            }
+        ),
+
+        Field(
+            {
+                name: "CalibrationMode", constraint: "1", description: "Perform a calibration.",
+                details: "This bit shall set the window covering into calibration mode:" +
+                    "\n" +
+                    "  • 0 = Normal mode" +
+                    "\n" +
+                    "  • 1 = Calibration mode",
+                xref: { document: "cluster", section: "5.3.5.2.2" }
+            }
+        ),
+
+        Field(
+            {
+                name: "MaintenanceMode", constraint: "2", description: "Freeze all motions for maintenance.",
+                details: "This bit shall set the window covering into maintenance mode:" +
+                    "\n" +
+                    "  • 0 = Normal mode" +
+                    "\n" +
+                    "  • 1 = Maintenance mode",
+                xref: { document: "cluster", section: "5.3.5.2.3" }
+            }
+        ),
+
+        Field(
+            {
+                name: "LedFeedback", constraint: "3", description: "Control the LEDs feedback.",
+                details: "This bit shall control feedback LEDs:" +
+                    "\n" +
+                    "  • 0 = LEDs are off" +
+                    "\n" +
+                    "  • 1 = LEDs will display feedback",
+                xref: { document: "cluster", section: "5.3.5.2.4" }
+            }
+        )
+    ),
+
+    Datatype(
+        {
             name: "OperationalStatusBitmap", type: "map8",
 
             details: "The OperationalStatusBitmap is using several internal operational state fields (composed of 2 bits) " +
@@ -589,169 +589,128 @@ export const WindowCovering = Cluster({
                 "\n" +
                 "  • 11b = Reserved",
 
-            xref: { document: "cluster", section: "5.3.5.3" },
-
-            children: [
-                Field({
-                    name: "Global", type: "MovementStatus", constraint: "0 to 2",
-                    description: "Global operational state.",
-                    details: "These bits shall indicate in which direction the covering is currently moving or if it has stopped. " +
-                        "Global operational state shall always reflect the overall motion of the device.",
-                    xref: { document: "cluster", section: "5.3.5.3.1" }
-                }),
-
-                Field({
-                    name: "Lift", type: "MovementStatus", constraint: "2 to 4", description: "Lift operational state.",
-                    details: "These bits shall indicate in which direction the covering’s lift is currently moving or if it has " +
-                        "stopped.",
-                    xref: { document: "cluster", section: "5.3.5.3.2" }
-                }),
-
-                Field({
-                    name: "Tilt", type: "MovementStatus", constraint: "4 to 6", description: "Tilt operational state.",
-                    details: "These bits shall indicate in which direction the covering’s tilt is currently moving or if it has " +
-                        "stopped.",
-                    xref: { document: "cluster", section: "5.3.5.3.3" }
-                })
-            ]
-        }),
-
-        Datatype({
-            name: "SafetyStatusBitmap", type: "map16",
-            xref: { document: "cluster", section: "5.3.5.4" },
-
-            children: [
-                Field({
-                    name: "RemoteLockout", constraint: "0",
-                    description: "Movement commands are ignored (locked out). e.g. not granted authorization, outside some time/date range."
-                }),
-                Field({
-                    name: "TamperDetection", constraint: "1",
-                    description: "Tampering detected on sensors or any other safety equipment. Ex: a device has been forcedly moved without its actuator(s)."
-                }),
-                Field({
-                    name: "FailedCommunication", constraint: "2",
-                    description: "Communication failure to sensors or other safety equipment."
-                }),
-                Field({
-                    name: "PositionFailure", constraint: "3",
-                    description: "Device has failed to reach the desired position. e.g. with position aware device, time expired before TargetPosition is reached."
-                }),
-                Field({
-                    name: "ThermalProtection", constraint: "4",
-                    description: "Motor(s) and/or electric circuit thermal protection activated."
-                }),
-                Field({
-                    name: "ObstacleDetected", constraint: "5",
-                    description: "An obstacle is preventing actuator movement."
-                }),
-                Field({
-                    name: "Power", constraint: "6",
-                    description: "Device has power related issue or limitation e.g. device is running w/ the help of a backup battery or power might not be fully available at the moment."
-                }),
-                Field({
-                    name: "StopInput", constraint: "7",
-                    description: "Local safety sensor (not a direct obstacle) is preventing movements (e.g. Safety EU Standard EN60335)."
-                }),
-                Field({
-                    name: "MotorJammed", constraint: "8",
-                    description: "Mechanical problem related to the motor(s) detected."
-                }),
-                Field({ name: "HardwareFailure", constraint: "9", description: "PCB, fuse and other electrics problems." }),
-                Field({
-                    name: "ManualOperation", constraint: "10",
-                    description: "Actuator is manually operated and is preventing actuator movement (e.g. actuator is disengaged/decoupled)."
-                }),
-                Field({ name: "Protection", constraint: "11", description: "Protection is activated." })
-            ]
-        }),
+            xref: { document: "cluster", section: "5.3.5.3" }
+        },
 
-        Datatype({
-            name: "TypeEnum", type: "enum8", asOf: "1.2",
-            xref: { document: "cluster", section: "5.3.5.5" },
-
-            children: [
-                Field({ name: "Rollershade", id: 0x0, conformance: "LF & !TL", description: "RollerShade" }),
-                Field({
-                    name: "Rollershade2Motor", id: 0x1, conformance: "LF & !TL", description: "RollerShade - 2 Motor"
-                }),
-                Field({
-                    name: "RollershadeExterior", id: 0x2, conformance: "LF & !TL",
-                    description: "RollerShade - Exterior"
-                }),
-                Field({
-                    name: "RollershadeExterior2Motor", id: 0x3, conformance: "LF & !TL",
-                    description: "RollerShade - Exterior - 2 Motor"
-                }),
-                Field({ name: "Drapery", id: 0x4, conformance: "LF & !TL", description: "Drapery (curtain)" }),
-                Field({ name: "Awning", id: 0x5, conformance: "LF & !TL", description: "Awning" }),
-                Field({ name: "Shutter", id: 0x6, conformance: "LF | TL", description: "Shutter" }),
-                Field({
-                    name: "TiltBlindTiltOnly", id: 0x7, conformance: "!LF & TL", description: "Tilt Blind - Tilt Only"
-                }),
-                Field({ name: "TiltBlindLift", id: 0x8, conformance: "LF & TL", description: "Tilt Blind - Lift & Tilt" }),
-                Field({ name: "ProjectorScreen", id: 0x9, conformance: "LF & !TL", description: "Projector Screen" }),
-                Field({ name: "Unknown", id: 0xff, conformance: "O", description: "Unknown" })
-            ]
+        Field({
+            name: "Global", type: "MovementStatus", constraint: "0 to 2",
+            description: "Global operational state.",
+            details: "These bits shall indicate in which direction the covering is currently moving or if it has stopped. " +
+                "Global operational state shall always reflect the overall motion of the device.",
+            xref: { document: "cluster", section: "5.3.5.3.1" }
         }),
 
-        Datatype({
-            name: "EndProductTypeEnum", type: "enum8",
-            xref: { document: "cluster", section: "5.3.5.6" },
-
-            children: [
-                Field({ name: "RollerShade", id: 0x0, conformance: "LF", description: "Simple Roller Shade" }),
-                Field({ name: "RomanShade", id: 0x1, conformance: "LF", description: "Roman Shade" }),
-                Field({ name: "BalloonShade", id: 0x2, conformance: "LF", description: "Balloon Shade" }),
-                Field({ name: "WovenWood", id: 0x3, conformance: "LF", description: "Woven Wood" }),
-                Field({ name: "PleatedShade", id: 0x4, conformance: "LF", description: "Pleated Shade" }),
-                Field({ name: "CellularShade", id: 0x5, conformance: "LF", description: "Cellular Shade" }),
-                Field({ name: "LayeredShade", id: 0x6, conformance: "LF", description: "Layered Shade" }),
-                Field({ name: "LayeredShade2D", id: 0x7, conformance: "LF", description: "Layered Shade 2D" }),
-                Field({ name: "SheerShade", id: 0x8, conformance: "LF & TL", description: "Sheer Shade" }),
-                Field({
-                    name: "TiltOnlyInteriorBlind", id: 0x9, conformance: "TL", description: "Tilt Only Interior Blind"
-                }),
-                Field({ name: "InteriorBlind", id: 0xa, conformance: "LF & TL", description: "Interior Blind" }),
-                Field({
-                    name: "VerticalBlindStripCurtain", id: 0xb, conformance: "LF & TL",
-                    description: "Vertical Blind, Strip Curtain"
-                }),
-                Field({
-                    name: "InteriorVenetianBlind", id: 0xc, conformance: "LF & TL",
-                    description: "Interior Venetian Blind"
-                }),
-                Field({
-                    name: "ExteriorVenetianBlind", id: 0xd, conformance: "LF & TL",
-                    description: "Exterior Venetian Blind"
-                }),
-                Field({ name: "LateralLeftCurtain", id: 0xe, conformance: "LF", description: "Lateral Left Curtain" }),
-                Field({ name: "LateralRightCurtain", id: 0xf, conformance: "LF", description: "Lateral Right Curtain" }),
-                Field({ name: "CentralCurtain", id: 0x10, conformance: "LF", description: "Central Curtain" }),
-                Field({ name: "RollerShutter", id: 0x11, conformance: "LF", description: "Roller Shutter" }),
-                Field({
-                    name: "ExteriorVerticalScreen", id: 0x12, conformance: "LF",
-                    description: "Exterior Vertical Screen"
-                }),
-                Field({ name: "AwningTerracePatio", id: 0x13, conformance: "LF", description: "Awning Terrace (Patio)" }),
-                Field({ name: "AwningVerticalScreen", id: 0x14, conformance: "LF", description: "Awning Vertical Screen" }),
-                Field({ name: "TiltOnlyPergola", id: 0x15, conformance: "LF | TL", description: "Tilt Only Pergola" }),
-                Field({ name: "SwingingShutter", id: 0x16, conformance: "LF | TL", description: "Swinging Shutter" }),
-                Field({ name: "SlidingShutter", id: 0x17, conformance: "LF | TL", description: "Sliding Shutter" }),
-                Field({ name: "Unknown", id: 0xff, conformance: "O", description: "Unknown" })
-            ]
+        Field({
+            name: "Lift", type: "MovementStatus", constraint: "2 to 4", description: "Lift operational state.",
+            details: "These bits shall indicate in which direction the covering’s lift is currently moving or if it has " +
+                "stopped.",
+            xref: { document: "cluster", section: "5.3.5.3.2" }
         }),
 
-        Datatype({
-            name: "MovementStatus", type: "enum8",
-            details: "Values for OperationalStatus attribute fields.",
-            children: [
-                Field({ name: "Stopped", id: 0x0, details: "Covering is not moving" }),
-                Field({ name: "Opening", id: 0x1, details: "Covering is moving from closed to open" }),
-                Field({ name: "Closing", id: 0x2, details: "Covering is moving from open to closed" })
-            ]
+        Field({
+            name: "Tilt", type: "MovementStatus", constraint: "4 to 6", description: "Tilt operational state.",
+            details: "These bits shall indicate in which direction the covering’s tilt is currently moving or if it has " +
+                "stopped.",
+            xref: { document: "cluster", section: "5.3.5.3.3" }
         })
-    ]
-});
+    ),
+
+    Datatype(
+        { name: "SafetyStatusBitmap", type: "map16", xref: { document: "cluster", section: "5.3.5.4" } },
+        Field({
+            name: "RemoteLockout", constraint: "0",
+            description: "Movement commands are ignored (locked out). e.g. not granted authorization, outside some time/date range."
+        }),
+        Field({
+            name: "TamperDetection", constraint: "1",
+            description: "Tampering detected on sensors or any other safety equipment. Ex: a device has been forcedly moved without its actuator(s)."
+        }),
+        Field({
+            name: "FailedCommunication", constraint: "2",
+            description: "Communication failure to sensors or other safety equipment."
+        }),
+        Field({
+            name: "PositionFailure", constraint: "3",
+            description: "Device has failed to reach the desired position. e.g. with position aware device, time expired before TargetPosition is reached."
+        }),
+        Field({
+            name: "ThermalProtection", constraint: "4",
+            description: "Motor(s) and/or electric circuit thermal protection activated."
+        }),
+        Field({ name: "ObstacleDetected", constraint: "5", description: "An obstacle is preventing actuator movement." }),
+        Field({
+            name: "Power", constraint: "6",
+            description: "Device has power related issue or limitation e.g. device is running w/ the help of a backup battery or power might not be fully available at the moment."
+        }),
+        Field({
+            name: "StopInput", constraint: "7",
+            description: "Local safety sensor (not a direct obstacle) is preventing movements (e.g. Safety EU Standard EN60335)."
+        }),
+        Field({ name: "MotorJammed", constraint: "8", description: "Mechanical problem related to the motor(s) detected." }),
+        Field({ name: "HardwareFailure", constraint: "9", description: "PCB, fuse and other electrics problems." }),
+        Field({
+            name: "ManualOperation", constraint: "10",
+            description: "Actuator is manually operated and is preventing actuator movement (e.g. actuator is disengaged/decoupled)."
+        }),
+        Field({ name: "Protection", constraint: "11", description: "Protection is activated." })
+    ),
+
+    Datatype(
+        { name: "TypeEnum", type: "enum8", asOf: "1.2", xref: { document: "cluster", section: "5.3.5.5" } },
+        Field({ name: "Rollershade", id: 0x0, conformance: "LF & !TL", description: "RollerShade" }),
+        Field({ name: "Rollershade2Motor", id: 0x1, conformance: "LF & !TL", description: "RollerShade - 2 Motor" }),
+        Field({ name: "RollershadeExterior", id: 0x2, conformance: "LF & !TL", description: "RollerShade - Exterior" }),
+        Field({
+            name: "RollershadeExterior2Motor", id: 0x3, conformance: "LF & !TL",
+            description: "RollerShade - Exterior - 2 Motor"
+        }),
+        Field({ name: "Drapery", id: 0x4, conformance: "LF & !TL", description: "Drapery (curtain)" }),
+        Field({ name: "Awning", id: 0x5, conformance: "LF & !TL", description: "Awning" }),
+        Field({ name: "Shutter", id: 0x6, conformance: "LF | TL", description: "Shutter" }),
+        Field({ name: "TiltBlindTiltOnly", id: 0x7, conformance: "!LF & TL", description: "Tilt Blind - Tilt Only" }),
+        Field({ name: "TiltBlindLift", id: 0x8, conformance: "LF & TL", description: "Tilt Blind - Lift & Tilt" }),
+        Field({ name: "ProjectorScreen", id: 0x9, conformance: "LF & !TL", description: "Projector Screen" }),
+        Field({ name: "Unknown", id: 0xff, conformance: "O", description: "Unknown" })
+    ),
+
+    Datatype(
+        { name: "EndProductTypeEnum", type: "enum8", xref: { document: "cluster", section: "5.3.5.6" } },
+        Field({ name: "RollerShade", id: 0x0, conformance: "LF", description: "Simple Roller Shade" }),
+        Field({ name: "RomanShade", id: 0x1, conformance: "LF", description: "Roman Shade" }),
+        Field({ name: "BalloonShade", id: 0x2, conformance: "LF", description: "Balloon Shade" }),
+        Field({ name: "WovenWood", id: 0x3, conformance: "LF", description: "Woven Wood" }),
+        Field({ name: "PleatedShade", id: 0x4, conformance: "LF", description: "Pleated Shade" }),
+        Field({ name: "CellularShade", id: 0x5, conformance: "LF", description: "Cellular Shade" }),
+        Field({ name: "LayeredShade", id: 0x6, conformance: "LF", description: "Layered Shade" }),
+        Field({ name: "LayeredShade2D", id: 0x7, conformance: "LF", description: "Layered Shade 2D" }),
+        Field({ name: "SheerShade", id: 0x8, conformance: "LF & TL", description: "Sheer Shade" }),
+        Field({ name: "TiltOnlyInteriorBlind", id: 0x9, conformance: "TL", description: "Tilt Only Interior Blind" }),
+        Field({ name: "InteriorBlind", id: 0xa, conformance: "LF & TL", description: "Interior Blind" }),
+        Field({
+            name: "VerticalBlindStripCurtain", id: 0xb, conformance: "LF & TL",
+            description: "Vertical Blind, Strip Curtain"
+        }),
+        Field({ name: "InteriorVenetianBlind", id: 0xc, conformance: "LF & TL", description: "Interior Venetian Blind" }),
+        Field({ name: "ExteriorVenetianBlind", id: 0xd, conformance: "LF & TL", description: "Exterior Venetian Blind" }),
+        Field({ name: "LateralLeftCurtain", id: 0xe, conformance: "LF", description: "Lateral Left Curtain" }),
+        Field({ name: "LateralRightCurtain", id: 0xf, conformance: "LF", description: "Lateral Right Curtain" }),
+        Field({ name: "CentralCurtain", id: 0x10, conformance: "LF", description: "Central Curtain" }),
+        Field({ name: "RollerShutter", id: 0x11, conformance: "LF", description: "Roller Shutter" }),
+        Field({ name: "ExteriorVerticalScreen", id: 0x12, conformance: "LF", description: "Exterior Vertical Screen" }),
+        Field({ name: "AwningTerracePatio", id: 0x13, conformance: "LF", description: "Awning Terrace (Patio)" }),
+        Field({ name: "AwningVerticalScreen", id: 0x14, conformance: "LF", description: "Awning Vertical Screen" }),
+        Field({ name: "TiltOnlyPergola", id: 0x15, conformance: "LF | TL", description: "Tilt Only Pergola" }),
+        Field({ name: "SwingingShutter", id: 0x16, conformance: "LF | TL", description: "Swinging Shutter" }),
+        Field({ name: "SlidingShutter", id: 0x17, conformance: "LF | TL", description: "Sliding Shutter" }),
+        Field({ name: "Unknown", id: 0xff, conformance: "O", description: "Unknown" })
+    ),
+
+    Datatype(
+        { name: "MovementStatus", type: "enum8", details: "Values for OperationalStatus attribute fields." },
+        Field({ name: "Stopped", id: 0x0, details: "Covering is not moving" }),
+        Field({ name: "Opening", id: 0x1, details: "Covering is moving from closed to open" }),
+        Field({ name: "Closing", id: 0x2, details: "Covering is moving from open to closed" })
+    )
+);
 
 MatterDefinition.children.push(WindowCovering);