@matter/model 0.11.9-alpha.0-20241206-22f233334 → 0.11.9-alpha.0-20241207-b604cfa44

package/src/standard/elements/PumpConfigurationAndControl.ts

@@ -15,606 +15,593 @@ import {
     DatatypeElement as Datatype
 } from "../../elements/index.js";
 
-export const PumpConfigurationAndControl = Cluster({
-    name: "PumpConfigurationAndControl", id: 0x200, classification: "application", pics: "PCC",
-    details: "The Pump Configuration and Control cluster provides an interface for the setup and control of pump " +
-        "devices, and the automatic reporting of pump status information. Note that control of pump speed is " +
-        "not included – speed is controlled by the On/Off and Level Control clusters.",
-    xref: { document: "cluster", section: "4.2" },
-
-    children: [
-        Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 4 }),
-
-        Attribute({
-            name: "FeatureMap", id: 0xfffc, type: "FeatureMap",
-            xref: { document: "cluster", section: "4.2.4" },
-
-            children: [
-                Field({
-                    name: "PRSCONST", conformance: "O.a+", constraint: "0", description: "ConstantPressure",
-                    details: "Supports operating in constant pressure mode"
-                }),
-                Field({
-                    name: "PRSCOMP", conformance: "O.a+", constraint: "1", description: "CompensatedPressure",
-                    details: "Supports operating in compensated pressure mode"
-                }),
-                Field({
-                    name: "FLW", conformance: "O.a+", constraint: "2", description: "ConstantFlow",
-                    details: "Supports operating in constant flow mode"
-                }),
-                Field({
-                    name: "SPD", conformance: "O.a+", constraint: "3", description: "ConstantSpeed",
-                    details: "Supports operating in constant speed mode"
-                }),
-                Field({
-                    name: "TEMP", conformance: "O.a+", constraint: "4", description: "ConstantTemperature",
-                    details: "Supports operating in constant temperature mode"
-                }),
-                Field({
-                    name: "AUTO", conformance: "O", constraint: "5", description: "Automatic",
-                    details: "Supports operating in automatic mode"
-                }),
-                Field({
-                    name: "LOCAL", conformance: "O", constraint: "6", description: "LocalOperation",
-                    details: "Supports operating using local settings"
-                })
-            ]
-        }),
-
-        Attribute({
-            name: "MaxPressure", id: 0x0, type: "int16", access: "R V", conformance: "M", default: null,
-            quality: "X F",
-            details: "This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and " +
-                "does not apply to any specific control mode or operation mode." +
-                "\n" +
-                "Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.1" }
-        }),
-
-        Attribute({
-            name: "MaxSpeed", id: 0x1, type: "uint16", access: "R V", conformance: "M", default: null,
-            quality: "X F",
-            details: "This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does " +
-                "not apply to any specific control mode or operation mode." +
-                "\n" +
-                "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.2" }
-        }),
-
-        Attribute({
-            name: "MaxFlow", id: 0x2, type: "uint16", access: "R V", conformance: "M", default: null,
-            quality: "X F",
-            details: "This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does " +
-                "not apply to any specific control mode or operation mode." +
-                "\n" +
-                "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.3" }
-        }),
-
-        Attribute({
-            name: "MinConstPressure", id: 0x3, type: "int16", access: "R V", conformance: "PRSCONST, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the minimum pressure the pump can achieve when it is working with the " +
-                "ControlMode attribute set to ConstantPressure." +
-                "\n" +
-                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.4" }
-        }),
-
-        Attribute({
-            name: "MaxConstPressure", id: 0x4, type: "int16", access: "R V", conformance: "PRSCONST, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the maximum pressure the pump can achieve when it is working with the " +
-                "ControlMode attribute set to ConstantPressure." +
-                "\n" +
-                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.5" }
-        }),
-
-        Attribute({
-            name: "MinCompPressure", id: 0x5, type: "int16", access: "R V", conformance: "PRSCOMP, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the minimum compensated pressure the pump can achieve when it is working " +
-                "with the ControlMode attribute set to ProportionalPressure." +
-                "\n" +
-                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.6" }
-        }),
-
-        Attribute({
-            name: "MaxCompPressure", id: 0x6, type: "int16", access: "R V", conformance: "PRSCOMP, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the maximum compensated pressure the pump can achieve when it is working " +
-                "with the ControlMode attribute set to ProportionalPressure." +
-                "\n" +
-                "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.7" }
-        }),
-
-        Attribute({
-            name: "MinConstSpeed", id: 0x7, type: "uint16", access: "R V", conformance: "SPD, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the minimum speed the pump can achieve when it is working with the " +
-                "ControlMode attribute set to ConstantSpeed." +
-                "\n" +
-                "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.8" }
-        }),
-
-        Attribute({
-            name: "MaxConstSpeed", id: 0x8, type: "uint16", access: "R V", conformance: "SPD, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the maximum speed the pump can achieve when it is working with the " +
-                "ControlMode attribute set to ConstantSpeed." +
-                "\n" +
-                "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.9" }
-        }),
-
-        Attribute({
-            name: "MinConstFlow", id: 0x9, type: "uint16", access: "R V", conformance: "FLW, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the minimum flow the pump can achieve when it is working with the Con" +
-                "\n" +
-                "trolMode attribute set to ConstantFlow." +
-                "\n" +
-                "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.10" }
-        }),
-
-        Attribute({
-            name: "MaxConstFlow", id: 0xa, type: "uint16", access: "R V", conformance: "FLW, [AUTO]",
-            default: null, quality: "X F",
-            details: "This attribute specifies the maximum flow the pump can achieve when it is working with the " +
-                "ControlMode attribute set to ConstantFlow." +
-                "\n" +
-                "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.11" }
-        }),
-
-        Attribute({
-            name: "MinConstTemp", id: 0xb, type: "int16", access: "R V", conformance: "TEMP, [AUTO]",
-            constraint: "min -27315", default: null, quality: "X F",
-            details: "This attribute specifies the minimum temperature the pump can maintain in the system when it is " +
-                "working with the ControlMode attribute set to ConstantTemperature." +
-                "\n" +
-                "Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.",
-            xref: { document: "cluster", section: "4.2.7.12" }
-        }),
-
-        Attribute({
-            name: "MaxConstTemp", id: 0xc, type: "int16", access: "R V", conformance: "TEMP, [AUTO]",
-            constraint: "min -27315", default: null, quality: "X F",
-
-            details: "This attribute specifies the maximum temperature the pump can maintain in the system when it is " +
-                "working with the ControlMode attribute set to ConstantTemperature." +
-                "\n" +
-                "MaxConstTemp shall be greater than or equal to MinConstTemp" +
-                "\n" +
-                "Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.",
-
-            xref: { document: "cluster", section: "4.2.7.13" }
-        }),
-
-        Attribute({
-            name: "PumpStatus", id: 0x10, type: "PumpStatusBitmap", access: "R V", conformance: "O",
-            constraint: "desc", default: 0, quality: "P",
-            details: "This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. " +
-                "Where a pump controller function is active, the corresponding bit shall be set to 1. Where a pump " +
-                "controller function is not active, the corresponding bit shall be set to 0.",
-            xref: { document: "cluster", section: "4.2.7.14" }
-        }),
-
-        Attribute({
-            name: "EffectiveOperationMode", id: 0x11, type: "OperationModeEnum", access: "R V",
-            conformance: "M", constraint: "desc", quality: "N",
-
-            details: "This attribute specifies current effective operation mode of the pump as defined in " +
-                "OperationModeEnum." +
-                "\n" +
-                "The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, " +
-                "unless one of the following points are true:" +
-                "\n" +
-                "  • The pump is physically set to run with the local settings" +
-                "\n" +
-                "  • The LocalOverride bit in the PumpStatus attribute is set," +
-                "\n" +
-                "See OperationMode and ControlMode attributes for a detailed description of the operation and " +
-                "control of the pump.",
-
-            xref: { document: "cluster", section: "4.2.7.15" }
-        }),
-
-        Attribute({
-            name: "EffectiveControlMode", id: 0x12, type: "ControlModeEnum", access: "R V", conformance: "M",
-            constraint: "desc", quality: "N",
-
-            details: "This attribute specifies the current effective control mode of the pump as defined in " +
-                "ControlModeEnum." +
-                "\n" +
-                "This attribute contains the control mode that currently applies to the pump. It will have the value " +
-                "of the ControlMode attribute, unless one of the following points are true:" +
-                "\n" +
-                "  • The ControlMode attribute is set to Automatic. In this case, the value of the " +
-                "    EffectiveControlMode shall match the behavior of the pump." +
-                "\n" +
-                "  • A remote sensor is used as the sensor for regulation of the pump. In this case, " +
-                "    EffectiveControlMode will display ConstantPressure, ConstantFlow or ConstantTemperature if the " +
-                "    remote sensor is a pressure sensor, a flow sensor or a temperature sensor respectively, " +
-                "    regardless of the value of the ControlMode attribute." +
-                "\n" +
-                "In case the ControlMode attribute is not included on the device and no remote sensors are " +
-                "connected, the value of the EffectiveControlMode shall match the vendor-specific behavior of the " +
-                "pump." +
-                "\n" +
-                "See OperationMode and ControlMode attributes for detailed a description of the operation and " +
-                "control of the pump.",
-
-            xref: { document: "cluster", section: "4.2.7.16" }
-        }),
-
-        Attribute({
-            name: "Capacity", id: 0x13, type: "int16", access: "R V", conformance: "M", default: null,
-            quality: "X P",
-
-            details: "This attribute specifies the actual capacity of the pump as a percentage of the effective maximum " +
-                "setpoint value. It is updated dynamically as the speed of the pump changes." +
-                "\n" +
-                "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
-                "this attribute will indicate the null value." +
-                "\n" +
-                "Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, " +
-                "values of capacity less than zero have no physical meaning.",
-
-            xref: { document: "cluster", section: "4.2.7.17" }
-        }),
-
-        Attribute({
-            name: "Speed", id: 0x14, type: "uint16", access: "R V", conformance: "O", default: null,
-            quality: "X",
-
-            details: "This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as " +
-                "the speed of the pump changes." +
-                "\n" +
-                "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
-                "this attribute will indicate the null value." +
-                "\n" +
-                "Valid range is 0 to 65.534 RPM.",
-
-            xref: { document: "cluster", section: "4.2.7.18" }
-        }),
-
-        Attribute({
-            name: "LifetimeRunningHours", id: 0x15, type: "uint24", access: "RW VM", conformance: "O",
-            default: 0, quality: "X N",
-
-            details: "This attribute specifies the accumulated number of hours that the pump has been powered and the " +
-                "motor has been running. It is updated dynamically as it increases. It is preserved over power " +
-                "cycles of the pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at " +
-                "0 (zero)." +
-                "\n" +
-                "This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If" +
-                "\n" +
-                "the value is not available, this attribute will indicate the null value. Valid range is 0 to " +
-                "16,777,214 hrs.",
-
-            xref: { document: "cluster", section: "4.2.7.19" }
-        }),
-
-        Attribute({
-            name: "Power", id: 0x16, type: "uint24", access: "R V", conformance: "O", default: null,
-            quality: "X",
-
-            details: "This attribute specifies the actual power consumption of the pump in Watts. The value of this " +
-                "attribute is updated dynamically as the power consumption of the pump changes." +
-                "\n" +
-                "This attribute is read only. If the value is not available (the measurement of power consumption is " +
-                "not done in the pump), this attribute will indicate the null value." +
-                "\n" +
-                "Valid range is 0 to 16,777,214 Watts.",
-
-            xref: { document: "cluster", section: "4.2.7.20" }
-        }),
-
-        Attribute({
-            name: "LifetimeEnergyConsumed", id: 0x17, type: "uint32", access: "RW VM", conformance: "O",
-            default: 0, quality: "X N",
-
-            details: "This attribute specifies the accumulated energy consumption of the pump through the entire lifetime " +
-                "of the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the " +
-                "energy consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it " +
-                "“rolls over” and starts at 0 (zero)." +
-                "\n" +
-                "This attribute is writeable, in order to allow setting to an appropriate value after maintenance." +
-                "\n" +
-                "Valid range is 0 kWh to 4,294,967,294 kWh." +
-                "\n" +
-                "Null if the value is unknown.",
-
-            xref: { document: "cluster", section: "4.2.7.21" }
-        }),
-
-        Attribute({
-            name: "OperationMode", id: 0x20, type: "OperationModeEnum", access: "RW VM", conformance: "M",
-            constraint: "desc", default: 0, quality: "N",
-
-            details: "This attribute specifies the operation mode of the pump as defined in OperationModeEnum." +
-                "\n" +
-                "The actual operating mode of the pump is a result of the setting of the attributes OperationMode, " +
-                "ControlMode and the optional connection of a remote sensor. The operation and control is " +
-                "prioritized as shown in the scheme below:" +
-                "\n" +
-                "Priority Scheme of Pump Operation and Control" +
-                "\n" +
-                "If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is " +
-                "operated." +
-                "\n" +
-                "If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote " +
-                "sensor decides the control mode of the pump. A connected remote pressure sensor will make the pump " +
-                "run in control mode Constant pressure and vice versa for flow and temperature type sensors. This is " +
-                "regardless of the setting of the ControlMode attribute." +
-                "\n" +
-                "If this attribute is Normal and no remote sensor is connected, the control mode of the pump is " +
-                "decided by the ControlMode attribute." +
-                "\n" +
-                "OperationMode may be changed at any time, even when the pump is running. The behavior of the pump " +
-                "at the point of changing the value of this attribute is vendor-specific." +
-                "\n" +
-                "In the case a device does not support a specific operation mode, the write interaction to this " +
-                "attribute with an unsupported operation mode value shall be ignored and a response containing the " +
-                "status of CONSTRAINT_ERROR shall be returned.",
-
-            xref: { document: "cluster", section: "4.2.7.22" }
-        }),
+export const PumpConfigurationAndControl = Cluster(
+    {
+        name: "PumpConfigurationAndControl", id: 0x200, classification: "application", pics: "PCC",
+        details: "The Pump Configuration and Control cluster provides an interface for the setup and control of pump " +
+            "devices, and the automatic reporting of pump status information. Note that control of pump speed is " +
+            "not included – speed is controlled by the On/Off and Level Control clusters.",
+        xref: { document: "cluster", section: "4.2" }
+    },
+
+    Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 4 }),
+
+    Attribute(
+        { name: "FeatureMap", id: 0xfffc, type: "FeatureMap", xref: { document: "cluster", section: "4.2.4" } },
+        Field({
+            name: "PRSCONST", conformance: "O.a+", constraint: "0", description: "ConstantPressure",
+            details: "Supports operating in constant pressure mode"
+        }),
+        Field({
+            name: "PRSCOMP", conformance: "O.a+", constraint: "1", description: "CompensatedPressure",
+            details: "Supports operating in compensated pressure mode"
+        }),
+        Field({
+            name: "FLW", conformance: "O.a+", constraint: "2", description: "ConstantFlow",
+            details: "Supports operating in constant flow mode"
+        }),
+        Field({
+            name: "SPD", conformance: "O.a+", constraint: "3", description: "ConstantSpeed",
+            details: "Supports operating in constant speed mode"
+        }),
+        Field({
+            name: "TEMP", conformance: "O.a+", constraint: "4", description: "ConstantTemperature",
+            details: "Supports operating in constant temperature mode"
+        }),
+        Field({
+            name: "AUTO", conformance: "O", constraint: "5", description: "Automatic",
+            details: "Supports operating in automatic mode"
+        }),
+        Field({
+            name: "LOCAL", conformance: "O", constraint: "6", description: "LocalOperation",
+            details: "Supports operating using local settings"
+        })
+    ),
+
+    Attribute({
+        name: "MaxPressure", id: 0x0, type: "int16", access: "R V", conformance: "M", default: null,
+        quality: "X F",
+        details: "This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and " +
+            "does not apply to any specific control mode or operation mode." +
+            "\n" +
+            "Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.1" }
+    }),
+
+    Attribute({
+        name: "MaxSpeed", id: 0x1, type: "uint16", access: "R V", conformance: "M", default: null,
+        quality: "X F",
+        details: "This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does " +
+            "not apply to any specific control mode or operation mode." +
+            "\n" +
+            "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.2" }
+    }),
+
+    Attribute({
+        name: "MaxFlow", id: 0x2, type: "uint16", access: "R V", conformance: "M", default: null,
+        quality: "X F",
+        details: "This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does " +
+            "not apply to any specific control mode or operation mode." +
+            "\n" +
+            "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.3" }
+    }),
+
+    Attribute({
+        name: "MinConstPressure", id: 0x3, type: "int16", access: "R V", conformance: "PRSCONST, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the minimum pressure the pump can achieve when it is working with the " +
+            "ControlMode attribute set to ConstantPressure." +
+            "\n" +
+            "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.4" }
+    }),
+
+    Attribute({
+        name: "MaxConstPressure", id: 0x4, type: "int16", access: "R V", conformance: "PRSCONST, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the maximum pressure the pump can achieve when it is working with the " +
+            "ControlMode attribute set to ConstantPressure." +
+            "\n" +
+            "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.5" }
+    }),
+
+    Attribute({
+        name: "MinCompPressure", id: 0x5, type: "int16", access: "R V", conformance: "PRSCOMP, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the minimum compensated pressure the pump can achieve when it is working " +
+            "with the ControlMode attribute set to ProportionalPressure." +
+            "\n" +
+            "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.6" }
+    }),
+
+    Attribute({
+        name: "MaxCompPressure", id: 0x6, type: "int16", access: "R V", conformance: "PRSCOMP, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the maximum compensated pressure the pump can achieve when it is working " +
+            "with the ControlMode attribute set to ProportionalPressure." +
+            "\n" +
+            "Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.7" }
+    }),
+
+    Attribute({
+        name: "MinConstSpeed", id: 0x7, type: "uint16", access: "R V", conformance: "SPD, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the minimum speed the pump can achieve when it is working with the " +
+            "ControlMode attribute set to ConstantSpeed." +
+            "\n" +
+            "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.8" }
+    }),
+
+    Attribute({
+        name: "MaxConstSpeed", id: 0x8, type: "uint16", access: "R V", conformance: "SPD, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the maximum speed the pump can achieve when it is working with the " +
+            "ControlMode attribute set to ConstantSpeed." +
+            "\n" +
+            "Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.9" }
+    }),
+
+    Attribute({
+        name: "MinConstFlow", id: 0x9, type: "uint16", access: "R V", conformance: "FLW, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the minimum flow the pump can achieve when it is working with the Con" +
+            "\n" +
+            "trolMode attribute set to ConstantFlow." +
+            "\n" +
+            "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.10" }
+    }),
+
+    Attribute({
+        name: "MaxConstFlow", id: 0xa, type: "uint16", access: "R V", conformance: "FLW, [AUTO]",
+        default: null, quality: "X F",
+        details: "This attribute specifies the maximum flow the pump can achieve when it is working with the " +
+            "ControlMode attribute set to ConstantFlow." +
+            "\n" +
+            "Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.11" }
+    }),
+
+    Attribute({
+        name: "MinConstTemp", id: 0xb, type: "int16", access: "R V", conformance: "TEMP, [AUTO]",
+        constraint: "min -27315", default: null, quality: "X F",
+        details: "This attribute specifies the minimum temperature the pump can maintain in the system when it is " +
+            "working with the ControlMode attribute set to ConstantTemperature." +
+            "\n" +
+            "Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.",
+        xref: { document: "cluster", section: "4.2.7.12" }
+    }),
+
+    Attribute({
+        name: "MaxConstTemp", id: 0xc, type: "int16", access: "R V", conformance: "TEMP, [AUTO]",
+        constraint: "min -27315", default: null, quality: "X F",
+
+        details: "This attribute specifies the maximum temperature the pump can maintain in the system when it is " +
+            "working with the ControlMode attribute set to ConstantTemperature." +
+            "\n" +
+            "MaxConstTemp shall be greater than or equal to MinConstTemp" +
+            "\n" +
+            "Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.",
+
+        xref: { document: "cluster", section: "4.2.7.13" }
+    }),
+
+    Attribute({
+        name: "PumpStatus", id: 0x10, type: "PumpStatusBitmap", access: "R V", conformance: "O",
+        constraint: "desc", default: 0, quality: "P",
+        details: "This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. " +
+            "Where a pump controller function is active, the corresponding bit shall be set to 1. Where a pump " +
+            "controller function is not active, the corresponding bit shall be set to 0.",
+        xref: { document: "cluster", section: "4.2.7.14" }
+    }),
+
+    Attribute({
+        name: "EffectiveOperationMode", id: 0x11, type: "OperationModeEnum", access: "R V",
+        conformance: "M", constraint: "desc", quality: "N",
+
+        details: "This attribute specifies current effective operation mode of the pump as defined in " +
+            "OperationModeEnum." +
+            "\n" +
+            "The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, " +
+            "unless one of the following points are true:" +
+            "\n" +
+            "  • The pump is physically set to run with the local settings" +
+            "\n" +
+            "  • The LocalOverride bit in the PumpStatus attribute is set," +
+            "\n" +
+            "See OperationMode and ControlMode attributes for a detailed description of the operation and " +
+            "control of the pump.",
+
+        xref: { document: "cluster", section: "4.2.7.15" }
+    }),
+
+    Attribute({
+        name: "EffectiveControlMode", id: 0x12, type: "ControlModeEnum", access: "R V", conformance: "M",
+        constraint: "desc", quality: "N",
+
+        details: "This attribute specifies the current effective control mode of the pump as defined in " +
+            "ControlModeEnum." +
+            "\n" +
+            "This attribute contains the control mode that currently applies to the pump. It will have the value " +
+            "of the ControlMode attribute, unless one of the following points are true:" +
+            "\n" +
+            "  • The ControlMode attribute is set to Automatic. In this case, the value of the " +
+            "    EffectiveControlMode shall match the behavior of the pump." +
+            "\n" +
+            "  • A remote sensor is used as the sensor for regulation of the pump. In this case, " +
+            "    EffectiveControlMode will display ConstantPressure, ConstantFlow or ConstantTemperature if the " +
+            "    remote sensor is a pressure sensor, a flow sensor or a temperature sensor respectively, " +
+            "    regardless of the value of the ControlMode attribute." +
+            "\n" +
+            "In case the ControlMode attribute is not included on the device and no remote sensors are " +
+            "connected, the value of the EffectiveControlMode shall match the vendor-specific behavior of the " +
+            "pump." +
+            "\n" +
+            "See OperationMode and ControlMode attributes for detailed a description of the operation and " +
+            "control of the pump.",
+
+        xref: { document: "cluster", section: "4.2.7.16" }
+    }),
+
+    Attribute({
+        name: "Capacity", id: 0x13, type: "int16", access: "R V", conformance: "M", default: null,
+        quality: "X P",
+
+        details: "This attribute specifies the actual capacity of the pump as a percentage of the effective maximum " +
+            "setpoint value. It is updated dynamically as the speed of the pump changes." +
+            "\n" +
+            "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
+            "this attribute will indicate the null value." +
+            "\n" +
+            "Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, " +
+            "values of capacity less than zero have no physical meaning.",
+
+        xref: { document: "cluster", section: "4.2.7.17" }
+    }),
+
+    Attribute({
+        name: "Speed", id: 0x14, type: "uint16", access: "R V", conformance: "O", default: null,
+        quality: "X",
+
+        details: "This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as " +
+            "the speed of the pump changes." +
+            "\n" +
+            "If the value is not available (the measurement or estimation of the speed is done in the pump), " +
+            "this attribute will indicate the null value." +
+            "\n" +
+            "Valid range is 0 to 65.534 RPM.",
+
+        xref: { document: "cluster", section: "4.2.7.18" }
+    }),
+
+    Attribute({
+        name: "LifetimeRunningHours", id: 0x15, type: "uint24", access: "RW VM", conformance: "O",
+        default: 0, quality: "X N",
+
+        details: "This attribute specifies the accumulated number of hours that the pump has been powered and the " +
+            "motor has been running. It is updated dynamically as it increases. It is preserved over power " +
+            "cycles of the pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at " +
+            "0 (zero)." +
+            "\n" +
+            "This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If" +
+            "\n" +
+            "the value is not available, this attribute will indicate the null value. Valid range is 0 to " +
+            "16,777,214 hrs.",
+
+        xref: { document: "cluster", section: "4.2.7.19" }
+    }),
+
+    Attribute({
+        name: "Power", id: 0x16, type: "uint24", access: "R V", conformance: "O", default: null,
+        quality: "X",
+
+        details: "This attribute specifies the actual power consumption of the pump in Watts. The value of this " +
+            "attribute is updated dynamically as the power consumption of the pump changes." +
+            "\n" +
+            "This attribute is read only. If the value is not available (the measurement of power consumption is " +
+            "not done in the pump), this attribute will indicate the null value." +
+            "\n" +
+            "Valid range is 0 to 16,777,214 Watts.",
+
+        xref: { document: "cluster", section: "4.2.7.20" }
+    }),
+
+    Attribute({
+        name: "LifetimeEnergyConsumed", id: 0x17, type: "uint32", access: "RW VM", conformance: "O",
+        default: 0, quality: "X N",
+
+        details: "This attribute specifies the accumulated energy consumption of the pump through the entire lifetime " +
+            "of the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the " +
+            "energy consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it " +
+            "“rolls over” and starts at 0 (zero)." +
+            "\n" +
+            "This attribute is writeable, in order to allow setting to an appropriate value after maintenance." +
+            "\n" +
+            "Valid range is 0 kWh to 4,294,967,294 kWh." +
+            "\n" +
+            "Null if the value is unknown.",
+
+        xref: { document: "cluster", section: "4.2.7.21" }
+    }),
+
+    Attribute({
+        name: "OperationMode", id: 0x20, type: "OperationModeEnum", access: "RW VM", conformance: "M",
+        constraint: "desc", default: 0, quality: "N",
+
+        details: "This attribute specifies the operation mode of the pump as defined in OperationModeEnum." +
+            "\n" +
+            "The actual operating mode of the pump is a result of the setting of the attributes OperationMode, " +
+            "ControlMode and the optional connection of a remote sensor. The operation and control is " +
+            "prioritized as shown in the scheme below:" +
+            "\n" +
+            "Priority Scheme of Pump Operation and Control" +
+            "\n" +
+            "If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is " +
+            "operated." +
+            "\n" +
+            "If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote " +
+            "sensor decides the control mode of the pump. A connected remote pressure sensor will make the pump " +
+            "run in control mode Constant pressure and vice versa for flow and temperature type sensors. This is " +
+            "regardless of the setting of the ControlMode attribute." +
+            "\n" +
+            "If this attribute is Normal and no remote sensor is connected, the control mode of the pump is " +
+            "decided by the ControlMode attribute." +
+            "\n" +
+            "OperationMode may be changed at any time, even when the pump is running. The behavior of the pump " +
+            "at the point of changing the value of this attribute is vendor-specific." +
+            "\n" +
+            "In the case a device does not support a specific operation mode, the write interaction to this " +
+            "attribute with an unsupported operation mode value shall be ignored and a response containing the " +
+            "status of CONSTRAINT_ERROR shall be returned.",
+
+        xref: { document: "cluster", section: "4.2.7.22" }
+    }),
+
+    Attribute({
+        name: "ControlMode", id: 0x21, type: "ControlModeEnum", access: "RW VM", conformance: "O",
+        constraint: "desc", default: 0, quality: "N",
+
+        details: "This attribute specifies the control mode of the pump as defined in ControlModeEnum." +
+            "\n" +
+            "See the OperationMode attribute for a detailed description of the operation and control of the" +
+            "\n" +
+            "pump." +
+            "\n" +
+            "ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at " +
+            "the point of changing is vendor-specific." +
+            "\n" +
+            "In the case a device does not support a specific control mode, the write interaction to this " +
+            "attribute with an unsupported control mode value shall be ignored and a response containing the " +
+            "status of CONSTRAINT_ERROR shall be returned.",
+
+        xref: { document: "cluster", section: "4.2.7.23" }
+    }),
+
+    Attribute({
+        name: "AlarmMask", id: 0x22, type: "uint16", access: "R V", conformance: "D", constraint: "desc",
+        default: 0, quality: "N",
+        xref: { document: "cluster", section: "4.2.7" }
+    }),
+    Event({
+        name: "SupplyVoltageLow", id: 0x0, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "SupplyVoltageHigh", id: 0x1, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "PowerMissingPhase", id: 0x2, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "SystemPressureLow", id: 0x3, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "SystemPressureHigh", id: 0x4, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "DryRunning", id: 0x5, access: "V", conformance: "O", priority: "critical",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "MotorTemperatureHigh", id: 0x6, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "PumpMotorFatalFailure", id: 0x7, access: "V", conformance: "O", priority: "critical",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "ElectronicTemperatureHigh", id: 0x8, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "PumpBlocked", id: 0x9, access: "V", conformance: "O", priority: "critical",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "SensorFailure", id: 0xa, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "ElectronicNonFatalFailure", id: 0xb, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "ElectronicFatalFailure", id: 0xc, access: "V", conformance: "O", priority: "critical",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "GeneralFault", id: 0xd, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "Leakage", id: 0xe, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "AirDetection", id: 0xf, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+    Event({
+        name: "TurbineOperation", id: 0x10, access: "V", conformance: "O", priority: "info",
+        xref: { document: "cluster", section: "4.2.8" }
+    }),
+
+    Datatype(
+        { name: "PumpStatusBitmap", type: "map16", xref: { document: "cluster", section: "4.2.6.1" } },
+
+        Field({
+            name: "DeviceFault", constraint: "0",
+            description: "A fault related to the system or pump device is detected.",
+            details: "If this bit is set, it may correspond to an event in the range 2-16, see Events.",
+            xref: { document: "cluster", section: "4.2.6.1.1" }
+        }),
+
+        Field({
+            name: "SupplyFault", constraint: "1",
+            description: "A fault related to the supply to the pump is detected.",
+            details: "If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.",
+            xref: { document: "cluster", section: "4.2.6.1.2" }
+        }),
+
+        Field({ name: "SpeedLow", constraint: "2", description: "Setpoint is too low to achieve." }),
+        Field({ name: "SpeedHigh", constraint: "3", description: "Setpoint is too high to achieve." }),
+
+        Field({
+            name: "LocalOverride", constraint: "4",
+            description: "Device control is overridden by hardware, such as an external STOP button or via a local HMI.",
+            details: "While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing " +
+                "OperationMode shall generate a FAILURE error status until LocalOverride is cleared on the physical " +
+                "device. When LocalOverride is cleared, the device shall return to the operation mode set in " +
+                "OperationMode.",
+            xref: { document: "cluster", section: "4.2.6.1.3" }
+        }),
+
+        Field({ name: "Running", constraint: "5", description: "Pump is currently running" }),
+
+        Field({
+            name: "RemotePressure", constraint: "6",
+            description: "A remote pressure sensor is used as the sensor for the regulation of the pump.",
+            details: "If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is " +
+                "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
+                "MaxMeasuredValue]).",
+            xref: { document: "cluster", section: "4.2.6.1.4" }
+        }),
+
+        Field({
+            name: "RemoteFlow", constraint: "7",
+            description: "A remote flow sensor is used as the sensor for the regulation of the pump.",
+            details: "If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is " +
+                "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
+                "MaxMeasuredValue]).",
+            xref: { document: "cluster", section: "4.2.6.1.5" }
+        }),
+
+        Field({
+            name: "RemoteTemperature", constraint: "8",
+            description: "A remote temperature sensor is used as the sensor for the regulation of the pump.",
+            details: "If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is " +
+                "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
+                "MaxMeasuredValue])",
+            xref: { document: "cluster", section: "4.2.6.1.6" }
+        })
+    ),
 
-        Attribute({
-            name: "ControlMode", id: 0x21, type: "ControlModeEnum", access: "RW VM", conformance: "O",
-            constraint: "desc", default: 0, quality: "N",
-
-            details: "This attribute specifies the control mode of the pump as defined in ControlModeEnum." +
-                "\n" +
-                "See the OperationMode attribute for a detailed description of the operation and control of the" +
-                "\n" +
-                "pump." +
-                "\n" +
-                "ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at " +
-                "the point of changing is vendor-specific." +
-                "\n" +
-                "In the case a device does not support a specific control mode, the write interaction to this " +
-                "attribute with an unsupported control mode value shall be ignored and a response containing the " +
-                "status of CONSTRAINT_ERROR shall be returned.",
-
-            xref: { document: "cluster", section: "4.2.7.23" }
-        }),
+    Datatype(
+        { name: "OperationModeEnum", type: "enum8", xref: { document: "cluster", section: "4.2.6.2" } },
 
-        Attribute({
-            name: "AlarmMask", id: 0x22, type: "uint16", access: "R V", conformance: "D", constraint: "desc",
-            default: 0, quality: "N",
-            xref: { document: "cluster", section: "4.2.7" }
-        }),
-        Event({
-            name: "SupplyVoltageLow", id: 0x0, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "SupplyVoltageHigh", id: 0x1, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "PowerMissingPhase", id: 0x2, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "SystemPressureLow", id: 0x3, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "SystemPressureHigh", id: 0x4, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "DryRunning", id: 0x5, access: "V", conformance: "O", priority: "critical",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "MotorTemperatureHigh", id: 0x6, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "PumpMotorFatalFailure", id: 0x7, access: "V", conformance: "O", priority: "critical",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "ElectronicTemperatureHigh", id: 0x8, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "PumpBlocked", id: 0x9, access: "V", conformance: "O", priority: "critical",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "SensorFailure", id: 0xa, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "ElectronicNonFatalFailure", id: 0xb, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "ElectronicFatalFailure", id: 0xc, access: "V", conformance: "O", priority: "critical",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "GeneralFault", id: 0xd, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "Leakage", id: 0xe, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "AirDetection", id: 0xf, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
-        }),
-        Event({
-            name: "TurbineOperation", id: 0x10, access: "V", conformance: "O", priority: "info",
-            xref: { document: "cluster", section: "4.2.8" }
+        Field({
+            name: "Normal", id: 0x0, conformance: "M",
+            description: "The pump is controlled by a setpoint, as defined by a connected remote sensor or by the ControlMode attribute.",
+            details: "If the pump is running in this operation mode the setpoint is an internal variable which may be " +
+                "controlled between 0% and 100%, e.g., by means of the Level Control cluster",
+            xref: { document: "cluster", section: "4.2.6.2.1" }
         }),
 
-        Datatype({
-            name: "PumpStatusBitmap", type: "map16",
-            xref: { document: "cluster", section: "4.2.6.1" },
-
-            children: [
-                Field({
-                    name: "DeviceFault", constraint: "0",
-                    description: "A fault related to the system or pump device is detected.",
-                    details: "If this bit is set, it may correspond to an event in the range 2-16, see Events.",
-                    xref: { document: "cluster", section: "4.2.6.1.1" }
-                }),
-
-                Field({
-                    name: "SupplyFault", constraint: "1",
-                    description: "A fault related to the supply to the pump is detected.",
-                    details: "If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.",
-                    xref: { document: "cluster", section: "4.2.6.1.2" }
-                }),
-
-                Field({ name: "SpeedLow", constraint: "2", description: "Setpoint is too low to achieve." }),
-                Field({ name: "SpeedHigh", constraint: "3", description: "Setpoint is too high to achieve." }),
-
-                Field({
-                    name: "LocalOverride", constraint: "4",
-                    description: "Device control is overridden by hardware, such as an external STOP button or via a local HMI.",
-                    details: "While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing " +
-                        "OperationMode shall generate a FAILURE error status until LocalOverride is cleared on the physical " +
-                        "device. When LocalOverride is cleared, the device shall return to the operation mode set in " +
-                        "OperationMode.",
-                    xref: { document: "cluster", section: "4.2.6.1.3" }
-                }),
-
-                Field({ name: "Running", constraint: "5", description: "Pump is currently running" }),
-
-                Field({
-                    name: "RemotePressure", constraint: "6",
-                    description: "A remote pressure sensor is used as the sensor for the regulation of the pump.",
-                    details: "If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is " +
-                        "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
-                        "MaxMeasuredValue]).",
-                    xref: { document: "cluster", section: "4.2.6.1.4" }
-                }),
-
-                Field({
-                    name: "RemoteFlow", constraint: "7",
-                    description: "A remote flow sensor is used as the sensor for the regulation of the pump.",
-                    details: "If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is " +
-                        "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
-                        "MaxMeasuredValue]).",
-                    xref: { document: "cluster", section: "4.2.6.1.5" }
-                }),
-
-                Field({
-                    name: "RemoteTemperature", constraint: "8",
-                    description: "A remote temperature sensor is used as the sensor for the regulation of the pump.",
-                    details: "If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is " +
-                        "interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – " +
-                        "MaxMeasuredValue])",
-                    xref: { document: "cluster", section: "4.2.6.1.6" }
-                })
-            ]
+        Field({
+            name: "Minimum", id: 0x1, conformance: "SPD",
+            description: "This value sets the pump to run at the minimum possible speed it can without being stopped."
         }),
-
-        Datatype({
-            name: "OperationModeEnum", type: "enum8",
-            xref: { document: "cluster", section: "4.2.6.2" },
-
-            children: [
-                Field({
-                    name: "Normal", id: 0x0, conformance: "M",
-                    description: "The pump is controlled by a setpoint, as defined by a connected remote sensor or by the ControlMode attribute.",
-                    details: "If the pump is running in this operation mode the setpoint is an internal variable which may be " +
-                        "controlled between 0% and 100%, e.g., by means of the Level Control cluster",
-                    xref: { document: "cluster", section: "4.2.6.2.1" }
-                }),
-
-                Field({
-                    name: "Minimum", id: 0x1, conformance: "SPD",
-                    description: "This value sets the pump to run at the minimum possible speed it can without being stopped."
-                }),
-                Field({
-                    name: "Maximum", id: 0x2, conformance: "SPD",
-                    description: "This value sets the pump to run at its maximum possible speed."
-                }),
-                Field({
-                    name: "Local", id: 0x3, conformance: "LOCAL",
-                    description: "This value sets the pump to run with the local settings of the pump, regardless of what these are."
-                })
-            ]
+        Field({
+            name: "Maximum", id: 0x2, conformance: "SPD",
+            description: "This value sets the pump to run at its maximum possible speed."
         }),
-
-        Datatype({
-            name: "ControlModeEnum", type: "enum8",
-            xref: { document: "cluster", section: "4.2.6.3" },
-
-            children: [
-                Field({
-                    name: "ConstantSpeed", id: 0x0, conformance: "SPD",
-                    description: "The pump is running at a constant speed.",
-                    details: "The setpoint is interpreted as a percentage of the range derived from the [MinConstSpeed – " +
-                        "MaxConstSpeed] attributes.",
-                    xref: { document: "cluster", section: "4.2.6.3.1" }
-                }),
-
-                Field({
-                    name: "ConstantPressure", id: 0x1, conformance: "PRSCONST",
-                    description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
-                    details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
-                        "In case of the internal pressure sensor, this will be the range derived from the [MinConstPressure " +
-                        "– MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived " +
-                        "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote pressure sensor.",
-                    xref: { document: "cluster", section: "4.2.6.3.2" }
-                }),
-
-                Field({
-                    name: "ProportionalPressure", id: 0x2, conformance: "PRSCOMP",
-                    description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
-                    details: "The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – " +
-                        "MaxCompPressure] attributes. The internal setpoint will be lowered (compensated) dependent on the " +
-                        "flow in the pump (lower flow ⇒ lower internal setpoint).",
-                    xref: { document: "cluster", section: "4.2.6.3.3" }
-                }),
-
-                Field({
-                    name: "ConstantFlow", id: 0x3, conformance: "FLW",
-                    description: "The pump will regulate its speed to maintain a constant flow through the pump.",
-                    details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
-                        "In case of the internal flow sensor, this will be the range derived from the [MinConstFlow – " +
-                        "MaxConstFlow] attributes. In case of a remote flow sensor, this will be the range derived from the " +
-                        "[MinMeasuredValue – MaxMeasuredValue] attributes of the remote flow sensor.",
-                    xref: { document: "cluster", section: "4.2.6.3.4" }
-                }),
-
-                Field({
-                    name: "ConstantTemperature", id: 0x5, conformance: "TEMP",
-                    description: "The pump will regulate its speed to maintain a constant temperature.",
-                    details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
-                        "In case of the internal temperature sensor, this will be the range derived from the [MinConstTemp – " +
-                        "MaxConstTemp] attributes. In case of a remote temperature sensor, this will be the range derived " +
-                        "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote temperature sensor.",
-                    xref: { document: "cluster", section: "4.2.6.3.5" }
-                }),
-
-                Field({
-                    name: "Automatic", id: 0x7, conformance: "AUTO",
-                    description: "The operation of the pump is automatically optimized to provide the most suitable performance with respect to comfort and energy savings.",
-                    details: "This behavior is manufacturer defined. The pump can be stopped by setting the setpoint of the level " +
-                        "control cluster to 0, or by using the On/Off cluster. If the pump is started (at any setpoint), the " +
-                        "speed of the pump is entirely determined by the pump.",
-                    xref: { document: "cluster", section: "4.2.6.3.6" }
-                })
-            ]
+        Field({
+            name: "Local", id: 0x3, conformance: "LOCAL",
+            description: "This value sets the pump to run with the local settings of the pump, regardless of what these are."
+        })
+    ),
+
+    Datatype(
+        { name: "ControlModeEnum", type: "enum8", xref: { document: "cluster", section: "4.2.6.3" } },
+
+        Field({
+            name: "ConstantSpeed", id: 0x0, conformance: "SPD",
+            description: "The pump is running at a constant speed.",
+            details: "The setpoint is interpreted as a percentage of the range derived from the [MinConstSpeed – " +
+                "MaxConstSpeed] attributes.",
+            xref: { document: "cluster", section: "4.2.6.3.1" }
+        }),
+
+        Field({
+            name: "ConstantPressure", id: 0x1, conformance: "PRSCONST",
+            description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
+            details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
+                "In case of the internal pressure sensor, this will be the range derived from the [MinConstPressure " +
+                "– MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived " +
+                "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote pressure sensor.",
+            xref: { document: "cluster", section: "4.2.6.3.2" }
+        }),
+
+        Field({
+            name: "ProportionalPressure", id: 0x2, conformance: "PRSCOMP",
+            description: "The pump will regulate its speed to maintain a constant differential pressure over its flanges.",
+            details: "The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – " +
+                "MaxCompPressure] attributes. The internal setpoint will be lowered (compensated) dependent on the " +
+                "flow in the pump (lower flow ⇒ lower internal setpoint).",
+            xref: { document: "cluster", section: "4.2.6.3.3" }
+        }),
+
+        Field({
+            name: "ConstantFlow", id: 0x3, conformance: "FLW",
+            description: "The pump will regulate its speed to maintain a constant flow through the pump.",
+            details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
+                "In case of the internal flow sensor, this will be the range derived from the [MinConstFlow – " +
+                "MaxConstFlow] attributes. In case of a remote flow sensor, this will be the range derived from the " +
+                "[MinMeasuredValue – MaxMeasuredValue] attributes of the remote flow sensor.",
+            xref: { document: "cluster", section: "4.2.6.3.4" }
+        }),
+
+        Field({
+            name: "ConstantTemperature", id: 0x5, conformance: "TEMP",
+            description: "The pump will regulate its speed to maintain a constant temperature.",
+            details: "The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. " +
+                "In case of the internal temperature sensor, this will be the range derived from the [MinConstTemp – " +
+                "MaxConstTemp] attributes. In case of a remote temperature sensor, this will be the range derived " +
+                "from the [MinMeasuredValue – MaxMeasuredValue] attributes of the remote temperature sensor.",
+            xref: { document: "cluster", section: "4.2.6.3.5" }
+        }),
+
+        Field({
+            name: "Automatic", id: 0x7, conformance: "AUTO",
+            description: "The operation of the pump is automatically optimized to provide the most suitable performance with respect to comfort and energy savings.",
+            details: "This behavior is manufacturer defined. The pump can be stopped by setting the setpoint of the level " +
+                "control cluster to 0, or by using the On/Off cluster. If the pump is started (at any setpoint), the " +
+                "speed of the pump is entirely determined by the pump.",
+            xref: { document: "cluster", section: "4.2.6.3.6" }
         })
-    ]
-});
+    )
+);
 
 MatterDefinition.children.push(PumpConfigurationAndControl);