@matter/model 0.11.9-alpha.0-20241206-22f233334 → 0.11.9-alpha.0-20241207-b604cfa44

package/src/standard/elements/DeviceEnergyManagementDT.ts

@@ -9,26 +9,26 @@
 import { MatterDefinition } from "../MatterDefinition.js";
 import { DeviceTypeElement as DeviceType, RequirementElement as Requirement } from "../../elements/index.js";
 
-export const DeviceEnergyManagementDt = DeviceType({
-    name: "DeviceEnergyManagement", id: 0x50d, category: "Utility", classification: "utility",
-    details: "A Device Energy Management device provides reporting and optionally adjustment of the electrical " +
-        "power planned on being consumed or produced by the device.",
-    xref: { document: "device", section: "2.7" },
+export const DeviceEnergyManagementDt = DeviceType(
+    {
+        name: "DeviceEnergyManagement", id: 0x50d, category: "Utility", classification: "utility",
+        details: "A Device Energy Management device provides reporting and optionally adjustment of the electrical " +
+            "power planned on being consumed or produced by the device.",
+        xref: { document: "device", section: "2.7" }
+    },
 
-    children: [
-        Requirement({
-            name: "Descriptor", id: 0x1d, element: "serverCluster",
-            children: [Requirement({ name: "DeviceTypeList", default: [ { deviceType: 1293, revision: 1 } ], element: "attribute" })]
-        }),
-        Requirement({
-            name: "DeviceEnergyManagement", id: 0x98, conformance: "P, M", element: "serverCluster",
-            xref: { document: "device", section: "2.7.3" }
-        }),
-        Requirement({
-            name: "DeviceEnergyManagementMode", id: 0x9f, conformance: "P, M", element: "serverCluster",
-            xref: { document: "device", section: "2.7.3" }
-        })
-    ]
-});
+    Requirement(
+        { name: "Descriptor", id: 0x1d, element: "serverCluster" },
+        Requirement({ name: "DeviceTypeList", default: [ { deviceType: 1293, revision: 1 } ], element: "attribute" })
+    ),
+    Requirement({
+        name: "DeviceEnergyManagement", id: 0x98, conformance: "P, M", element: "serverCluster",
+        xref: { document: "device", section: "2.7.3" }
+    }),
+    Requirement({
+        name: "DeviceEnergyManagementMode", id: 0x9f, conformance: "P, M", element: "serverCluster",
+        xref: { document: "device", section: "2.7.3" }
+    })
+);
 
 MatterDefinition.children.push(DeviceEnergyManagementDt);

package/src/standard/elements/DeviceEnergyManagementMode.ts

@@ -14,60 +14,58 @@ import {
     FieldElement as Field
 } from "../../elements/index.js";
 
-export const DeviceEnergyManagementMode = Cluster({
-    name: "DeviceEnergyManagementMode", id: 0x9f, type: "ModeBase", classification: "application",
-    pics: "DEMM",
-    details: "This cluster is derived from the Mode Base cluster, defining additional mode tags and namespaced " +
-        "enumerated values for Device Energy Management devices." +
-        "\n" +
-        "NOTE Support for Device Energy Management Mode cluster is provisional.",
-    xref: { document: "cluster", section: "9.6" },
+export const DeviceEnergyManagementMode = Cluster(
+    {
+        name: "DeviceEnergyManagementMode", id: 0x9f, type: "ModeBase", classification: "application",
+        pics: "DEMM",
+        details: "This cluster is derived from the Mode Base cluster, defining additional mode tags and namespaced " +
+            "enumerated values for Device Energy Management devices." +
+            "\n" +
+            "NOTE Support for Device Energy Management Mode cluster is provisional.",
+        xref: { document: "cluster", section: "9.6" }
+    },
 
-    children: [
-        Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 1 }),
+    Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 1 }),
 
-        Datatype({
-            name: "ModeOptionStruct", type: "ModeOptionStruct",
-            details: "The table below lists the changes relative to the Mode Base cluster for the fields of the " +
-                "ModeOptionStruct type. A blank field indicates no change.",
-            xref: { document: "cluster", section: "9.6.4.1" }
-        }),
+    Datatype({
+        name: "ModeOptionStruct", type: "ModeOptionStruct",
+        details: "The table below lists the changes relative to the Mode Base cluster for the fields of the " +
+            "ModeOptionStruct type. A blank field indicates no change.",
+        xref: { document: "cluster", section: "9.6.4.1" }
+    }),
 
-        Datatype({
-            name: "ModeTag", type: "enum16",
+    Datatype(
+        { name: "ModeTag", type: "enum16" },
 
-            children: [
-                Field({
-                    name: "NoOptimization", id: 0x4000,
-                    details: "The device prohibits optimization of energy usage management: its energy usage is determined only " +
-                        "by the user configuration and internal device needs. This tag cannot be included with any of the " +
-                        "other tags defined below in a mode.",
-                    xref: { document: "cluster", section: "9.6.5.1.1" }
-                }),
+        Field({
+            name: "NoOptimization", id: 0x4000,
+            details: "The device prohibits optimization of energy usage management: its energy usage is determined only " +
+                "by the user configuration and internal device needs. This tag cannot be included with any of the " +
+                "other tags defined below in a mode.",
+            xref: { document: "cluster", section: "9.6.5.1.1" }
+        }),
 
-                Field({
-                    name: "DeviceOptimization", id: 0x4001,
-                    details: "The device is permitted to manage its own energy usage. For example, using tariff information it " +
-                        "may obtain.",
-                    xref: { document: "cluster", section: "9.6.5.1.2" }
-                }),
+        Field({
+            name: "DeviceOptimization", id: 0x4001,
+            details: "The device is permitted to manage its own energy usage. For example, using tariff information it " +
+                "may obtain.",
+            xref: { document: "cluster", section: "9.6.5.1.2" }
+        }),
 
-                Field({
-                    name: "LocalOptimization", id: 0x4002,
-                    details: "The device permits management of energy usage by an energy manager to optimize the local energy " +
-                        "usage.",
-                    xref: { document: "cluster", section: "9.6.5.1.3" }
-                }),
+        Field({
+            name: "LocalOptimization", id: 0x4002,
+            details: "The device permits management of energy usage by an energy manager to optimize the local energy " +
+                "usage.",
+            xref: { document: "cluster", section: "9.6.5.1.3" }
+        }),
 
-                Field({
-                    name: "GridOptimization", id: 0x4003,
-                    details: "The device permits management of energy usage by an energy manager to optimize the grid energy " +
-                        "usage.",
-                    xref: { document: "cluster", section: "9.6.5.1.4" }
-                })
-            ]
+        Field({
+            name: "GridOptimization", id: 0x4003,
+            details: "The device permits management of energy usage by an energy manager to optimize the grid energy " +
+                "usage.",
+            xref: { document: "cluster", section: "9.6.5.1.4" }
         })
-    ]
-});
+    )
+);
 
 MatterDefinition.children.push(DeviceEnergyManagementMode);

package/src/standard/elements/DiagnosticLogs.ts

@@ -15,217 +15,207 @@ import {
     DatatypeElement as Datatype
 } from "../../elements/index.js";
 
-export const DiagnosticLogs = Cluster({
-    name: "DiagnosticLogs", id: 0x32, classification: "node", pics: "DLOG",
-    details: "This Cluster supports an interface to a Node. It provides commands for retrieving unstructured " +
-        "diagnostic logs from a Node that may be used to aid in diagnostics. It will often be the case that " +
-        "unstructured diagnostic logs will be Node-wide and not specific to any subset of Endpoints. When " +
-        "present, this Cluster shall be implemented once for the Node. The Node SHOULD also implement the " +
-        "BDX Initiator and BDX Sender roles as defined in the BDX Protocol.",
-    xref: { document: "core", section: "11.11" },
-
-    children: [
-        Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 1 }),
-
-        Command({
+export const DiagnosticLogs = Cluster(
+    {
+        name: "DiagnosticLogs", id: 0x32, classification: "node", pics: "DLOG",
+        details: "This Cluster supports an interface to a Node. It provides commands for retrieving unstructured " +
+            "diagnostic logs from a Node that may be used to aid in diagnostics. It will often be the case that " +
+            "unstructured diagnostic logs will be Node-wide and not specific to any subset of Endpoints. When " +
+            "present, this Cluster shall be implemented once for the Node. The Node SHOULD also implement the " +
+            "BDX Initiator and BDX Sender roles as defined in the BDX Protocol.",
+        xref: { document: "core", section: "11.11" }
+    },
+
+    Attribute({ name: "ClusterRevision", id: 0xfffd, type: "ClusterRevision", default: 1 }),
+
+    Command(
+        {
             name: "RetrieveLogsRequest", id: 0x0, access: "O", conformance: "M", direction: "request",
             response: "RetrieveLogsResponse",
             details: "Reception of this command starts the process of retrieving diagnostic logs from a Node.",
-            xref: { document: "core", section: "11.11.5.1" },
-
-            children: [
-                Field({
-                    name: "Intent", id: 0x0, type: "IntentEnum", conformance: "M",
-                    details: "This field shall indicate why the diagnostic logs are being retrieved from the Node. A Node may " +
-                        "utilize this field to selectively determine the logs to transfer.",
-                    xref: { document: "core", section: "11.11.5.1.1" }
-                }),
-
-                Field({
-                    name: "RequestedProtocol", id: 0x1, type: "TransferProtocolEnum", conformance: "M",
-
-                    details: "This field shall be used to indicate how the log transfer is to be realized. If the field is set to " +
-                        "BDX, then if the receiving Node supports BDX it shall attempt to use BDX to transfer any potential " +
-                        "diagnostic logs; if the receiving Node does not support BDX then the Node shall follow the " +
-                        "requirements defined for a TransferProtocolEnum of ResponsePayload. If this field is set to " +
-                        "ResponsePayload the receiving Node shall only utilize the LogContent field of the " +
-                        "RetrieveLogsResponse command to transfer diagnostic log information.",
-
-                    xref: { document: "core", section: "11.11.5.1.2" }
-                }),
-
-                Field({
-                    name: "TransferFileDesignator", id: 0x2, type: "string", conformance: "O", constraint: "max 32",
-
-                    details: "This field shall be present if the RequestedProtocol is BDX. The TransferFileDesignator shall be " +
-                        "set as the File Designator of the BDX transfer if initiated." +
-                        "\n" +
-                        "Effect on Receipt" +
-                        "\n" +
-                        "On receipt of this command, the Node shall respond with a RetrieveLogsResponse command." +
-                        "\n" +
-                        "If the RequestedProtocol is set to BDX the Node SHOULD immediately realize the RetrieveLogsResponse " +
-                        "command by initiating a BDX Transfer, sending a BDX SendInit message with the File Designator field " +
-                        "of the message set to the value of the TransferFileDesignator field of the RetrieveLogsRequest. On " +
-                        "reception of a BDX SendAccept message the Node shall send a RetrieveLogsResponse command with a " +
-                        "Status field set to Success and proceed with the log transfer over BDX. If a failure StatusReport " +
-                        "is received in response to the SendInit message, the Node shall send a RetrieveLogsResponse command " +
-                        "with a Status of Denied. In the case where the Node is able to fit the entirety of the requested " +
-                        "logs within the LogContent field, the Status field of the RetrieveLogsResponse shall be set to " +
-                        "Exhausted and a BDX session shall NOT be initiated." +
-                        "\n" +
-                        "If the RequestedProtocol is set to BDX and either the Node does not support BDX or it is not " +
-                        "possible for the Node to establish a BDX session, then the Node shall utilize the LogContent field " +
-                        "of the RetrieveLogsResponse command to transfer as much of the current logs as it can fit within " +
-                        "the response, and the Status field of the RetrieveLogsResponse shall be set to Exhausted." +
-                        "\n" +
-                        "If the RequestedProtocol is set to ResponsePayload the Node shall utilize the LogContent field of " +
-                        "the RetrieveLogsResponse command to transfer as much of the current logs as it can fit within the " +
-                        "response, and a BDX session shall NOT be initiated." +
-                        "\n" +
-                        "If the RequestedProtocol is set to BDX and there is no TransferFileDesignator the command shall " +
-                        "fail with a Status Code of INVALID_COMMAND." +
-                        "\n" +
-                        "If the Intent and/or the RequestedProtocol arguments contain invalid (out of range) values the " +
-                        "command shall fail with a Status Code of INVALID_COMMAND.",
-
-                    xref: { document: "core", section: "11.11.5.1.3" }
-                })
-            ]
+            xref: { document: "core", section: "11.11.5.1" }
+        },
+
+        Field({
+            name: "Intent", id: 0x0, type: "IntentEnum", conformance: "M",
+            details: "This field shall indicate why the diagnostic logs are being retrieved from the Node. A Node may " +
+                "utilize this field to selectively determine the logs to transfer.",
+            xref: { document: "core", section: "11.11.5.1.1" }
         }),
 
-        Command({
+        Field({
+            name: "RequestedProtocol", id: 0x1, type: "TransferProtocolEnum", conformance: "M",
+
+            details: "This field shall be used to indicate how the log transfer is to be realized. If the field is set to " +
+                "BDX, then if the receiving Node supports BDX it shall attempt to use BDX to transfer any potential " +
+                "diagnostic logs; if the receiving Node does not support BDX then the Node shall follow the " +
+                "requirements defined for a TransferProtocolEnum of ResponsePayload. If this field is set to " +
+                "ResponsePayload the receiving Node shall only utilize the LogContent field of the " +
+                "RetrieveLogsResponse command to transfer diagnostic log information.",
+
+            xref: { document: "core", section: "11.11.5.1.2" }
+        }),
+
+        Field({
+            name: "TransferFileDesignator", id: 0x2, type: "string", conformance: "O", constraint: "max 32",
+
+            details: "This field shall be present if the RequestedProtocol is BDX. The TransferFileDesignator shall be " +
+                "set as the File Designator of the BDX transfer if initiated." +
+                "\n" +
+                "Effect on Receipt" +
+                "\n" +
+                "On receipt of this command, the Node shall respond with a RetrieveLogsResponse command." +
+                "\n" +
+                "If the RequestedProtocol is set to BDX the Node SHOULD immediately realize the RetrieveLogsResponse " +
+                "command by initiating a BDX Transfer, sending a BDX SendInit message with the File Designator field " +
+                "of the message set to the value of the TransferFileDesignator field of the RetrieveLogsRequest. On " +
+                "reception of a BDX SendAccept message the Node shall send a RetrieveLogsResponse command with a " +
+                "Status field set to Success and proceed with the log transfer over BDX. If a failure StatusReport " +
+                "is received in response to the SendInit message, the Node shall send a RetrieveLogsResponse command " +
+                "with a Status of Denied. In the case where the Node is able to fit the entirety of the requested " +
+                "logs within the LogContent field, the Status field of the RetrieveLogsResponse shall be set to " +
+                "Exhausted and a BDX session shall NOT be initiated." +
+                "\n" +
+                "If the RequestedProtocol is set to BDX and either the Node does not support BDX or it is not " +
+                "possible for the Node to establish a BDX session, then the Node shall utilize the LogContent field " +
+                "of the RetrieveLogsResponse command to transfer as much of the current logs as it can fit within " +
+                "the response, and the Status field of the RetrieveLogsResponse shall be set to Exhausted." +
+                "\n" +
+                "If the RequestedProtocol is set to ResponsePayload the Node shall utilize the LogContent field of " +
+                "the RetrieveLogsResponse command to transfer as much of the current logs as it can fit within the " +
+                "response, and a BDX session shall NOT be initiated." +
+                "\n" +
+                "If the RequestedProtocol is set to BDX and there is no TransferFileDesignator the command shall " +
+                "fail with a Status Code of INVALID_COMMAND." +
+                "\n" +
+                "If the Intent and/or the RequestedProtocol arguments contain invalid (out of range) values the " +
+                "command shall fail with a Status Code of INVALID_COMMAND.",
+
+            xref: { document: "core", section: "11.11.5.1.3" }
+        })
+    ),
+
+    Command(
+        {
             name: "RetrieveLogsResponse", id: 0x1, conformance: "M", direction: "response",
             details: "This shall be generated as a response to the RetrieveLogsRequest. The data for this command is " +
                 "shown in the following.",
-            xref: { document: "core", section: "11.11.5.2" },
-
-            children: [
-                Field({
-                    name: "Status", id: 0x0, type: "StatusEnum", conformance: "M",
-                    details: "This field shall indicate the result of an attempt to retrieve diagnostic logs.",
-                    xref: { document: "core", section: "11.11.5.2.1" }
-                }),
-
-                Field({
-                    name: "LogContent", id: 0x1, type: "octstr", conformance: "M", constraint: "max 1024",
-                    details: "This field shall be included in the command if the Status field has a value of Success or " +
-                        "Exhausted. A Node SHOULD utilize this field to transfer the newest diagnostic log entries. This " +
-                        "field shall be empty if BDX is requested and the Status field has a value of Success.",
-                    xref: { document: "core", section: "11.11.5.2.2" }
-                }),
-
-                Field({
-                    name: "UtcTimeStamp", id: 0x2, type: "epoch-us", conformance: "O",
-                    details: "This field SHOULD be included in the command if the Status field has a value of Success and the " +
-                        "Node maintains a wall clock. When included, the UTCTimeStamp field shall contain the value of the " +
-                        "oldest log entry in the diagnostic logs that are being transferred.",
-                    xref: { document: "core", section: "11.11.5.2.3" }
-                }),
-
-                Field({
-                    name: "TimeSinceBoot", id: 0x3, type: "systime-us", conformance: "O",
-                    details: "This field SHOULD be included in the command if the Status field has a value of Success. When " +
-                        "included, the TimeSinceBoot field shall contain the time of the oldest log entry in the diagnostic " +
-                        "logs that are being transferred represented by the number of microseconds since the last time the " +
-                        "Node went through a reboot.",
-                    xref: { document: "core", section: "11.11.5.2.4" }
-                })
-            ]
+            xref: { document: "core", section: "11.11.5.2" }
+        },
+
+        Field({
+            name: "Status", id: 0x0, type: "StatusEnum", conformance: "M",
+            details: "This field shall indicate the result of an attempt to retrieve diagnostic logs.",
+            xref: { document: "core", section: "11.11.5.2.1" }
+        }),
+
+        Field({
+            name: "LogContent", id: 0x1, type: "octstr", conformance: "M", constraint: "max 1024",
+            details: "This field shall be included in the command if the Status field has a value of Success or " +
+                "Exhausted. A Node SHOULD utilize this field to transfer the newest diagnostic log entries. This " +
+                "field shall be empty if BDX is requested and the Status field has a value of Success.",
+            xref: { document: "core", section: "11.11.5.2.2" }
+        }),
+
+        Field({
+            name: "UtcTimeStamp", id: 0x2, type: "epoch-us", conformance: "O",
+            details: "This field SHOULD be included in the command if the Status field has a value of Success and the " +
+                "Node maintains a wall clock. When included, the UTCTimeStamp field shall contain the value of the " +
+                "oldest log entry in the diagnostic logs that are being transferred.",
+            xref: { document: "core", section: "11.11.5.2.3" }
+        }),
+
+        Field({
+            name: "TimeSinceBoot", id: 0x3, type: "systime-us", conformance: "O",
+            details: "This field SHOULD be included in the command if the Status field has a value of Success. When " +
+                "included, the TimeSinceBoot field shall contain the time of the oldest log entry in the diagnostic " +
+                "logs that are being transferred represented by the number of microseconds since the last time the " +
+                "Node went through a reboot.",
+            xref: { document: "core", section: "11.11.5.2.4" }
+        })
+    ),
+
+    Datatype(
+        { name: "IntentEnum", type: "enum8", xref: { document: "core", section: "11.11.4.1" } },
+
+        Field({
+            name: "EndUserSupport", id: 0x0, conformance: "M",
+            description: "Logs to be used for end- user support",
+            details: "shall indicate that the purpose of the log request is to retrieve logs for the intention of " +
+                "providing support to an end-user.",
+            xref: { document: "core", section: "11.11.4.1.1" }
+        }),
+
+        Field({
+            name: "NetworkDiag", id: 0x1, conformance: "M",
+            description: "Logs to be used for network diagnostics",
+            details: "shall indicate that the purpose of the log request is to diagnose the network(s) for which the Node " +
+                "is currently commissioned (and/or connected) or has previously been commissioned (and/or connected).",
+            xref: { document: "core", section: "11.11.4.1.2" }
+        }),
+
+        Field({
+            name: "CrashLogs", id: 0x2, conformance: "M", description: "Obtain crash logs from the Node",
+            details: "shall indicate that the purpose of the log request is to retrieve any crash logs that may be " +
+                "present on a Node.",
+            xref: { document: "core", section: "11.11.4.1.3" }
+        })
+    ),
+
+    Datatype(
+        { name: "StatusEnum", type: "enum8", xref: { document: "core", section: "11.11.4.2" } },
+        Field({
+            name: "Success", id: 0x0, conformance: "M", description: "Successful transfer of logs",
+            details: "shall be used if diagnostic logs will be or are being transferred.",
+            xref: { document: "core", section: "11.11.4.2.1" }
         }),
 
-        Datatype({
-            name: "IntentEnum", type: "enum8",
-            xref: { document: "core", section: "11.11.4.1" },
-
-            children: [
-                Field({
-                    name: "EndUserSupport", id: 0x0, conformance: "M",
-                    description: "Logs to be used for end- user support",
-                    details: "shall indicate that the purpose of the log request is to retrieve logs for the intention of " +
-                        "providing support to an end-user.",
-                    xref: { document: "core", section: "11.11.4.1.1" }
-                }),
-
-                Field({
-                    name: "NetworkDiag", id: 0x1, conformance: "M",
-                    description: "Logs to be used for network diagnostics",
-                    details: "shall indicate that the purpose of the log request is to diagnose the network(s) for which the Node " +
-                        "is currently commissioned (and/or connected) or has previously been commissioned (and/or connected).",
-                    xref: { document: "core", section: "11.11.4.1.2" }
-                }),
-
-                Field({
-                    name: "CrashLogs", id: 0x2, conformance: "M", description: "Obtain crash logs from the Node",
-                    details: "shall indicate that the purpose of the log request is to retrieve any crash logs that may be " +
-                        "present on a Node.",
-                    xref: { document: "core", section: "11.11.4.1.3" }
-                })
-            ]
+        Field({
+            name: "Exhausted", id: 0x1, conformance: "M", description: "All logs has been transferred",
+            details: "shall be used when a BDX session is requested, however, all available logs were provided in a " +
+                "LogContent field.",
+            xref: { document: "core", section: "11.11.4.2.2" }
         }),
 
-        Datatype({
-            name: "StatusEnum", type: "enum8",
-            xref: { document: "core", section: "11.11.4.2" },
-
-            children: [
-                Field({
-                    name: "Success", id: 0x0, conformance: "M", description: "Successful transfer of logs",
-                    details: "shall be used if diagnostic logs will be or are being transferred.",
-                    xref: { document: "core", section: "11.11.4.2.1" }
-                }),
-
-                Field({
-                    name: "Exhausted", id: 0x1, conformance: "M", description: "All logs has been transferred",
-                    details: "shall be used when a BDX session is requested, however, all available logs were provided in a " +
-                        "LogContent field.",
-                    xref: { document: "core", section: "11.11.4.2.2" }
-                }),
-
-                Field({
-                    name: "NoLogs", id: 0x2, conformance: "M", description: "No logs of the requested type available",
-                    details: "shall be used if the Node does not currently have any diagnostic logs of the requested type " +
-                        "(Intent) to transfer.",
-                    xref: { document: "core", section: "11.11.4.2.3" }
-                }),
-
-                Field({
-                    name: "Busy", id: 0x3, conformance: "M", description: "Unable to handle request, retry later",
-                    details: "shall be used if the Node is unable to handle the request (e.g. in the process of another transfer) " +
-                        "and the Client SHOULD re-attempt the request later.",
-                    xref: { document: "core", section: "11.11.4.2.4" }
-                }),
-
-                Field({
-                    name: "Denied", id: 0x4, conformance: "M",
-                    description: "The request is denied, no logs being transferred",
-                    details: "shall be used if the Node is denying the current transfer of diagnostic logs for any reason.",
-                    xref: { document: "core", section: "11.11.4.2.5" }
-                })
-            ]
+        Field({
+            name: "NoLogs", id: 0x2, conformance: "M", description: "No logs of the requested type available",
+            details: "shall be used if the Node does not currently have any diagnostic logs of the requested type " +
+                "(Intent) to transfer.",
+            xref: { document: "core", section: "11.11.4.2.3" }
+        }),
+
+        Field({
+            name: "Busy", id: 0x3, conformance: "M", description: "Unable to handle request, retry later",
+            details: "shall be used if the Node is unable to handle the request (e.g. in the process of another transfer) " +
+                "and the Client SHOULD re-attempt the request later.",
+            xref: { document: "core", section: "11.11.4.2.4" }
+        }),
+
+        Field({
+            name: "Denied", id: 0x4, conformance: "M",
+            description: "The request is denied, no logs being transferred",
+            details: "shall be used if the Node is denying the current transfer of diagnostic logs for any reason.",
+            xref: { document: "core", section: "11.11.4.2.5" }
+        })
+    ),
+
+    Datatype(
+        { name: "TransferProtocolEnum", type: "enum8", xref: { document: "core", section: "11.11.4.3" } },
+
+        Field({
+            name: "ResponsePayload", id: 0x0, conformance: "M",
+            description: "Logs to be returned as a response",
+            details: "shall be used by a Client to request that logs are transferred using the LogContent attribute of " +
+                "the response",
+            xref: { document: "core", section: "11.11.4.3.1" }
         }),
 
-        Datatype({
-            name: "TransferProtocolEnum", type: "enum8",
-            xref: { document: "core", section: "11.11.4.3" },
-
-            children: [
-                Field({
-                    name: "ResponsePayload", id: 0x0, conformance: "M",
-                    description: "Logs to be returned as a response",
-                    details: "shall be used by a Client to request that logs are transferred using the LogContent attribute of " +
-                        "the response",
-                    xref: { document: "core", section: "11.11.4.3.1" }
-                }),
-
-                Field({
-                    name: "Bdx", id: 0x1, conformance: "M", description: "Logs to be returned using BDX",
-                    details: "shall be used by a Client to request that logs are transferred using BDX as defined in BDX Protocol",
-                    xref: { document: "core", section: "11.11.4.3.2" }
-                })
-            ]
+        Field({
+            name: "Bdx", id: 0x1, conformance: "M", description: "Logs to be returned using BDX",
+            details: "shall be used by a Client to request that logs are transferred using BDX as defined in BDX Protocol",
+            xref: { document: "core", section: "11.11.4.3.2" }
         })
-    ]
-});
+    )
+);
 
 MatterDefinition.children.push(DiagnosticLogs);