@lofcz/tikz 0.1.0 → 0.2.0

package/runtime/dist/bundles/latex-extra/files/tex/generic/pgf/systemlayer/pgfsys.code.tex

@@ -1,1775 +0,0 @@
-% Copyright 2019 by Till Tantau
-%
-% This file may be distributed and/or modified
-%
-% 1. under the LaTeX Project Public License and/or
-% 2. under the GNU Public License.
-%
-% See the file doc/generic/pgf/licenses/LICENSE for more details.
-
-\ProvidesPackageRCS{pgfsys.code.tex}
-
-
-% Load key mechanism
-\ifdefined\pgfkeysloaded\else
-  \input pgfkeys.code.tex
-\fi
-
-% "pgf" is a family
-\pgfkeys{/pgf/.is family}
-\def\pgfset{\pgfqkeys{/pgf}}
-
-% This if is needed *very* early
-\newif\ifpgfpicture
-
-
-%
-% The following conversion functions are used to convert from TeX
-% dimensions to postscript/pdf points.
-%
-{\catcode`\p=12\catcode`\t=12\gdef\Pgf@geT#1pt{#1}}
-
-\def\pgf@sys@tonumber#1{\expandafter\Pgf@geT\the#1}
-
-\def\pgf@sys@bp@correct#1{#1=0.99627#1}
-
-\def\pgf@sys@bp#1{%
-  {%
-    \pgf@x=#1\relax%
-    \pgf@x=0.99627\pgf@x%
-    \edef\temp{\expandafter\Pgf@geT\the\pgf@x\space}%
-    \pgfutil@toks@\expandafter\expandafter\expandafter{\expandafter\pgfsysprotocol@currentprotocol\temp}%
-    \xdef\pgfsysprotocol@currentprotocol{\the\pgfutil@toks@}%
-  }%
-}
-\def\pgf@sys@pt#1{%
-  {%
-    \pgf@x=#1\relax%
-    \edef\temp{\expandafter\Pgf@geT\the\pgf@x\space}%
-    \pgfutil@toks@\expandafter\expandafter\expandafter{\expandafter\pgfsysprotocol@currentprotocol\temp}%
-    \xdef\pgfsysprotocol@currentprotocol{\the\pgfutil@toks@}%
-  }%
-}
-
-
-% internal dimensions that are always present when pgsys is loaded.
-\newdimen\pgf@x
-\newdimen\pgf@y
-\newdimen\pgf@xa
-\newdimen\pgf@ya
-\newdimen\pgf@xb
-\newdimen\pgf@yb
-\newdimen\pgf@xc
-\newdimen\pgf@yc
-\newdimen\pgf@xd
-\newdimen\pgf@yd
-
-\newwrite\w@pgf@writea
-\newread\r@pgf@reada
-\let\pgfutil@inputcheck=\r@pgf@reada
-
-% internal counters that are always present when pgfsys is loaded
-\newcount\c@pgf@counta
-\newcount\c@pgf@countb
-\newcount\c@pgf@countc
-\newcount\c@pgf@countd
-
-\newtoks\t@pgf@toka
-\newtoks\t@pgf@tokb
-\newtoks\t@pgf@tokc
-
-% Ensure that math registers are the same (math is broken in case it
-% is loaded first)
-\let\pgfmath@x\pgf@x
-\let\pgfmath@xa\pgf@xa
-\let\pgfmath@xb\pgf@xb
-\let\pgfmath@xc\pgf@xc
-
-\let\pgfmath@y\pgf@y
-\let\pgfmath@ya\pgf@ya
-\let\pgfmath@yb\pgf@yb
-\let\pgfmath@yc\pgf@yc
-
-\let\c@pgfmath@counta\c@pgf@counta
-\let\c@pgfmath@countb\c@pgf@countb
-\let\c@pgfmath@countc\c@pgf@countc
-\let\c@pgfmath@countd\c@pgf@countd
-
-
-
-
-
-% In the following dummy definitions of the pgf system commands are
-% given. The individual drivers must overwrite these definitions,
-% preferably all of them. If some system command is used that has not
-% been overwritten, the command fails with a warning.
-%
-% In some cases, some pgf system commands are just shorthands for a
-% series of more complicated commands. In this case, a default
-% implementation is given in this file, but a driver may choose to
-% overwrite this default implementation with a more efficient
-% version. For example, a closestroke is the same as a closepath
-% followed by a stroking, but in pdf there is a special shorthand for
-% this. So, the pdf driver overwrites \pgfsys@closestroke, while the
-% postscript driver does not.
-%
-% The commands for which default implementations are available are
-% given at the end.
-
-\def\pgf@sys@fail#1{%
-  \expandafter\ifx\csname pgf@sys@fail@#1\endcsname\pgfutil@empty%
-  \else%
-    \expandafter\global\expandafter\let\csname pgf@sys@fail@#1\endcsname=\pgfutil@empty%
-    \pgfwarning{Your graphic driver \pgfsysdriver\space does not support #1. This warning is given only once}%
-  \fi%
-}
-
-
-
-%
-% Invocation commands
-%
-
-\def\pgfsys@invoke{\pgf@sys@fail{invoking specials}}
-% This command is used whenever some literal text needs to be inserted
-% into the resulting .pdf, .ps, or .dvi file. Note that most
-% \pgfsys@xxxx commands will not directly call this command, but,
-% rather, use the protocolling mechanism to record their literal
-% text. It is then left to the discretion of the protocolling
-% mechanism to insert the literal text at some appropriate, later
-% time.
-%
-% This command should only be called when \pgfsys@beginpicture has
-% been called previously and when the picture has not been suspended
-% using \pgfsys@beginhbox.
-
-\def\pgfsys@outerinvoke{\pgfsys@invoke}
-% This command can be used to insert protocolled graphic commands
-% outside any picture. This is extremely dangerous, but sometimes
-% useful. By default, this command does the same as inside pictures.
-
-
-
-%
-%
-% Path construction commands
-%
-%
-
-\def\pgfsys@moveto#1#2{\pgf@sys@fail{path constructions}}
-% This command is used to start a path at a specific point (#1,#2)
-% or to move the current point of the current path to (#1,#2)
-% without drawing anything upon stroking (the current path is
-% `interrupted').
-%
-% The arguments must be dimensions (like |10pt|).
-%
-% Example:
-%
-% \pgfsys@moveto{10pt}{10pt}
-% \pgfsys@lineto{0pt}{0pt}
-% \pgfsys@stroke
-%
-% This will draw a line from (10pt,10pt) to the origin of the picture.
-
-\def\pgfsys@lineto#1#2{\pgf@sys@fail{path constructions}}
-% Continue the current path to (#1,#2) with a line.
-
-\def\pgfsys@curveto#1#2#3#4#5#6{\pgf@sys@fail{path constructions}}
-% Continue the current path with a bezier curve to (#5,#6). The
-% control points of the curve are at (#1,#2) and (#3,#4).
-
-\def\pgfsys@rect#1#2#3#4{\pgf@sys@fail{path constructions}}
-% Append a rectangle to the current path whose lower left corner is at
-% (#1,#2) and whose width/height is given by (#3,#4).
-%
-% This command can be `mapped back' to moveto and lineto commands, but
-% it is included since pdf has a special, quick version of this command.
-
-\def\pgfsys@closepath{\pgf@sys@fail{path constructions}}
-% Close the current path. This results in joining the current point of
-% the path with the point specified by the last moveto
-% operation. Typically, this is preferable over using lineto to the
-% last point specified by a moveto, since the line starting at this
-% point and the line ending at this point will be smoothly joined by
-% closepath.
-%
-% Example:
-%
-% \pgfsys@moveto{0}{0}
-% \pgfsys@lineto{10}{10}
-% \pgfsys@lineto{0}{10}
-% \pgfsys@closepath
-% \pgfsys@stroke
-%
-% versus
-%
-% \pgfsys@moveto{0}{0}
-% \pgfsys@lineto{10}{10}
-% \pgfsys@lineto{0}{10}
-% \pgfsys@lineto{0}{0}
-% \pgfsys@stroke
-%
-% The difference between the above will be that in the second triangle
-% the corner at the origin will be wrong; it will just be the overlay
-% of two lines going in different directions, not a sharp pointed
-% corner.
-
-
-
-
-
-
-%
-%
-% Stroking and filling commands
-%
-%
-
-\def\pgfsys@stroke{\pgf@sys@fail{path usage}}
-% Stroke the current path (as if it were drawn with a pen). A number
-% of so-called graphic state parameters influence this, which can be
-% set in different ways:
-%
-% - linewidth
-%   The `thickness' of the line. A width of 0 is the thinnest width
-%   renderable on the device. On a high-resolution printer this may
-%   become invisible and should be avoided. A good choice is 0.4pt,
-%   which is the default.
-%
-% - stroke color
-%   This special color is used for stroking. If it is not set, the
-%   current color is used.
-%
-% - cap
-%   The cap describes how the endings of lines a drawn. A round cap
-%   adds a little half circle to these endings. A butt cap ends the
-%   lines exactly at the end (or start) point without anything
-%   added. A rectangular cap ends the lines like the butt cap, but the
-%   lines protrude over the endpoint by the line thickness. (See also
-%   the pdf or postscript manual). If the path has been closed, no cap
-%   is drawn.
-%
-% - join
-%   This describes how a bend (a join) in a path is rendered. A round
-%   join draws bends using small arcs. A bevel join just draws the two
-%   lines and then fills the join minimally so that it becomes
-%   convex. A miter join extends the lines so that they form a single
-%   sharp corner, but only up to a certain miter limit. (See the pdf
-%   or postscript manual once more).
-%
-% - dash
-%   The line may be dashed according to a dashing pattern.
-%
-% - clipping area
-%   If a clipping area is established, only those parts of the path
-%   that are inside the clipping area will be drawn.
-%
-% In addition to stroking a path, the path may also be used for
-% clipping after it has been stroked. This will happen if the
-% \pgfsys@clipnext is used prior to this command, see there for
-% details.
-
-\def\pgfsys@fill{\pgf@sys@fail{path usage}}
-% This command fills the area surrounded by the current path. If the
-% path has not yet been closed, it is closed prior to filling. The
-% path itself is not stroked. For self-intersecting paths or paths
-% consisting of multiple parts, the nonzero winding number rule is
-% used to determine whether a point is inside or outside the
-% path, except if \ifpgfsys@eorule holds -- in which case the even-odd
-% rule should be used. (See the pdf or postscript manual for details.)
-%
-% The following graphic state parameters influence the filling:
-%
-% - fill color
-%   If the fill color is not especially set, the current color is
-%   used.
-%
-% - clipping area
-%   If a clipping area is established, only those parts of the filling
-%   area that are inside the clipping area will be drawn.
-%
-% In addition to filling the path, the path will also be used for
-% clipping if \pgfsys@clipnext is used prior to this command.
-
-\def\pgfsys@fillstroke{\pgf@sys@fail{path usage}}
-% First, the path is filled, then the path is stroked. If the fill and
-% stroke colors are the same (or if they are not specified and the
-% current color is used), this yields almost the same as a
-% \pgfsys@fill. However, due to the line thickness of the stroked
-% path, the fillstroked area will be slightly larger.
-%
-% In addition to stroking and filling the path, the path will also be
-% used for clipping if \pgfsys@clipnext is used prior to this command.
-
-\def\pgfsys@clipnext{\pgf@sys@fail{path usage}}
-% This command should be issued after a path has been constructed, but
-% before it has been stroked and/or filled or discarded. When the
-% command is used, the next stroking/filling/discarding command will
-% first be executed normally. Then, afterwards, the just-used path
-% will be used for subsequent clipping. If there has already been a
-% clipping region, this region is intersected with the new clipping
-% path (the clipping cannot get bigger). The nonzero winding number
-% rule is used to determine whether a point is inside or outside the
-% clipping area or the even-odd rule, depending on whether
-% \ifpgfsys@eorule holds.
-
-\def\pgfsys@discardpath{\pgf@sys@fail{path usage}}
-% Normally, this command should `throw away' the current path.
-% However, after \pgfsys@clipnext has been called, the current path
-% should subsequently be used for clipping. See \pgfsys@clipnext for
-% details.
-
-\def\pgfsys@closestroke{\pgfsys@closepath\pgfsys@stroke}
-% This command should have the same effect as first closing the path
-% and then stroking it.
-
-\newif\ifpgfsys@eorule
-% Decides, whether even-odd filling and clipping is
-% to be used or normal the non-zero winding number rule. See the
-% pdf-documentation for details on what these rules are.
-
-
-
-
-%
-%
-% Stroking options
-%
-%
-\def\pgfsys@setlinewidth#1{\pgf@sys@fail{setting the line width}}
-% Sets the width of lines, when stroked, to #1, which must be a TeX
-% dimension (as text).
-
-\def\pgfsys@buttcap{\pgf@sys@fail{setting the line cap}}
-% Sets the cap to a butt cap. See \pgfsys@stroke.
-
-\def\pgfsys@roundcap{\pgf@sys@fail{setting the line cap}}
-% Sets the cap to a round cap. See \pgfsys@stroke.
-
-\def\pgfsys@rectcap{\pgf@sys@fail{setting the line cap}}
-% Sets the cap to a rectangular cap. See \pgfsys@stroke.
-
-\def\pgfsys@miterjoin{\pgf@sys@fail{setting the line join}}
-% Sets the join to a miter join. See \pgfsys@stroke.
-
-\def\pgfsys@setmiterlimit#1{\pgf@sys@fail{setting the line cap}}
-% Sets the miter limit of lines to #1. See the pdf or postscript
-% documentation.
-
-\def\pgfsys@roundjoin{\pgf@sys@fail{setting the line cap}}
-% Sets the join to a round join. See \pgfsys@stroke.
-
-\def\pgfsys@beveljoin{\pgf@sys@fail{setting the line cap}}
-% Sets the join to a bevel join. See \pgfsys@stroke.
-
-\def\pgfsys@setdash#1#2{\pgf@sys@fail{setting the dashing pattern}}
-% Sets the dashing pattern. #1 should be a list of lengths separated by
-% commas. #2 should be a single dimension.
-%
-% The list of values in #1 is used to determine the lengths of the
-% `on' phases of the dashing and of the `off' phases. For example, if
-% #1 is `3pt,4pt', then the dashing pattern is `3pt on followed by 4pt
-% off, followed by 3pt on, followed by 4pt off, and so on'. A pattern
-% of `.5pt,4pt,3pt,1.5pt' means `.5pt on, 4pt off, 3pt on, 1.5pt off, .5pt on,
-% ...'. If the number of entries is odd, the last one is used twice,
-% so `3pt' means `3pt on, 3pt off, 3pt on, 3pt off,...'. An empty list
-% means `always on'.
-%
-% The second argument determines the `phase' of the pattern. For
-% example, for a pattern of `3pt,4pt' and a phase of `1pt', the pattern
-% would start: `2pt on, 4pt off, 3pt on, 4pt off, 3pt on, 4pt off...'.
-
-
-
-
-
-%
-%
-% Color stuff
-%
-%
-
-\def\pgfsys@color@rgb@stroke#1#2#3{\pgf@sys@fail{color}}
-% Sets the color used for stroking operations to the given rgb tuple
-% (numbers between 0 and 1).
-%
-% Example: Make stroked text dark red: \pgfsys@color@rgb@stroke{0.5}{0}{0}
-%
-% The special stroking color is only used if the stroking color has
-% been set since the last \pgfutil@color command. Thus, each \pgfutil@color command
-% should reset both the stroking and filling colors.
-
-\def\pgfsys@color@rgb@fill#1#2#3{\pgf@sys@fail{color}}
-% Sets the color used for filling operations to the given rgb tuple
-% (numbers between 0 and 1). This color may be different from the
-% stroking color.
-
-\def\pgfsys@color@rgb#1#2#3{\pgfsys@color@rgb@stroke{#1}{#2}{#3}\pgfsys@color@rgb@fill{#1}{#2}{#3}}
-% Sets the color used for filling and stroking operations. This is a
-% ``low-level'' version of the \pgfutil@color command. It is currently only
-% used by the plain tex version to support colors.
-
-\def\pgfsys@color@cmyk@stroke#1#2#3#4{\pgf@sys@fail{color}}
-% Sets the color used for stroking operations to the given cymk tuple
-% (numbers between 0 and 1).
-
-\def\pgfsys@color@cmyk@fill#1#2#3#4{\pgf@sys@fail{color}}
-% Sets the color used for filling operations to the given cymk tuple
-% (numbers between 0 and 1).
-
-\def\pgfsys@color@cmyk#1#2#3#4{\pgfsys@color@cmyk@stroke{#1}{#2}{#3}{#4}\pgfsys@color@cmyk@fill{#1}{#2}{#3}{#4}}
-% Sets the color used for filling and stroking operations.
-
-\def\pgfsys@color@cmy@stroke#1#2#3{\pgf@sys@fail{color}}
-% Sets the color used for stroking operations to the given cym tuple
-% (numbers between 0 and 1).
-
-\def\pgfsys@color@cmy@fill#1#2#3{\pgf@sys@fail{color}}
-% Sets the color used for filling operations to the given cym tuple
-% (numbers between 0 and 1).
-
-\def\pgfsys@color@cmy#1#2#3{\pgfsys@color@cmy@stroke{#1}{#2}{#3}\pgfsys@color@cmy@fill{#1}{#2}{#3}}
-% Sets the color used for filling and stroking operations.
-
-\def\pgfsys@color@gray@stroke#1{\pgf@sys@fail{color}}
-% Sets the color used for stroking operations to the given gray level
-% (number between 0 and 1).
-
-\def\pgfsys@color@gray@fill#1{\pgf@sys@fail{color}}
-% Sets the color used for filling operations to the given gray level
-% (number between 0 and 1).
-
-\def\pgfsys@color@gray#1{\pgfsys@color@gray@stroke{#1}\pgfsys@color@gray@fill{#1}}
-% Sets the color used for filling and stroking operations.
-
-\newif\ifpgfsys@color@reset@inorder
-% This if decides whether the color resetting of the
-% \pgfsys@color@reset command may assume that all color commands are
-% given ``in order.'' This means that this command will not be called,
-% say, at the beginning of a box that is later inserted at a point
-% where a fill color was actively set. This may allow the command to
-% produce more compact code when it ``knows'' that no special fill or
-% stroke color has been set.
-\pgfsys@color@reset@inordertrue
-
-
-\def\pgfsys@color@reset{}
-% This command will be called when the \pgfutil@color command is used. It
-% should purge any internal settings of stroking and filling
-% color. After this call, till the next use of a command like
-% \pgfsys@color@rgb@fill, the current color installed by the \pgfutil@color
-% command should be used.
-
-\def\pgfsys@color@unstacked#1{}
-% This slightly obscure command causes the color stack to be
-% tricked. When called, this command should set the current color to
-% #1 without causing any change in the color stack.
-
-\def\pgfsys@text@to@black@hook{}
-% Another slightly obscure command that allows tikz to hack into
-% dvisvgm's color management inside text nodes. The problem is that
-% the color "black" is special for dvisvgm.
-
-
-
-%
-%
-% Coordinate system transformations
-%
-%
-
-\def\pgfsys@transformcm#1#2#3#4#5#6{\pgf@sys@fail{transformations}}
-% Perform a concatenation of the low-level current transformation
-% matrix with the matrix given by the values #1 to #6. The
-% transformation matrix is a transformation on a homogeneous
-% 2D-coordinate system. See the pdf or postscript manual for details.
-
-\def\pgfsys@transformshift#1#2{\pgfsys@transformcm{1}{0}{0}{1}{#1}{#2}}
-% This command will change the origin of the low-level coordinate
-% system to (#1,#2).
-
-\def\pgfsys@transformxyscale#1#2{\pgfsys@transformcm{#1}{0}{0}{#2}{0bp}{0bp}}
-% This command will scale the low-level coordinate system (and
-% everything that is drawn) by a factor of #1 in x-directed and #2 in
-% y-direction. Note that this applies to everything, including
-% lines. So a scaled line will have a different width and may even
-% have a different width when going along the x-axis and when going
-% along the y-axis, if the scaling is different in these directions.
-
-\def\pgfsys@viewboxmeet#1#2#3#4#5#6#7#8{\pgfsys@beginscope\pgf@sys@default@viewbox@impl{#1}{#2}{#3}{#4}{#5}{#6}{#7}{#8}{<}}
-% Consider the two rectangles R with lower left corner
-% (#5,#6) and upper right (#7,#8) and S with lower left corner
-% (#1,#2) and upper right (#3,#4). Now, consider the transformation
-% that scales and translates R so that the result T has the same
-% center as S and has maximal size while still being inside S. This
-% transformation gets installed in a new graphics group, which must be
-% ended with a corresponding \pgfsys@endviewbox.
-
-\def\pgfsys@viewboxslice#1#2#3#4#5#6#7#8{\pgfsys@beginscope\pgf@sys@default@viewbox@impl{#1}{#2}{#3}{#4}{#5}{#6}{#7}{#8}{>}}
-% Works like \pgfsys@viewboxmeet, but R3 will have minimal size so
-% that in contains all of R2.
-
-\def\pgfsys@endviewbox{\pgfsys@endscope}
-% Ends a viewbox scope started by either of the previous two commands.
-
-
-\def\pgf@sys@default@viewbox@impl#1#2#3#4#5#6#7#8#9{{%
-    \pgf@x#1%
-    \pgf@y#2%
-    \pgf@xa#3%
-    \pgf@ya#4%
-    \advance\pgf@xa by-\pgf@x%
-    \advance\pgf@ya by-\pgf@y%
-    \pgfmathdivide@{\pgf@sys@tonumber\pgf@xa}{\pgf@sys@tonumber\pgf@ya}%
-    \let\aspectr\pgfmathresult%
-    \pgf@xb#5%
-    \pgf@yb#6%
-    \pgf@xc#7%
-    \pgf@yc#8%
-    \advance\pgf@xc by-\pgf@xb%
-    \advance\pgf@yc by-\pgf@yb%
-    \pgfmathdivide@{\pgf@sys@tonumber\pgf@xc}{\pgf@sys@tonumber\pgf@yc}%
-    \let\aspects\pgfmathresult%
-    \ifdim\aspectr pt#9\aspects pt%
-      \pgfmathdivide@{\pgf@sys@tonumber\pgf@xa}{\pgf@sys@tonumber\pgf@xc}%
-    \else%
-      \pgfmathdivide@{\pgf@sys@tonumber\pgf@ya}{\pgf@sys@tonumber\pgf@yc}%
-    \fi%
-    \advance\pgf@x by.5\pgf@xa%
-    \advance\pgf@xb by.5\pgf@xc%
-    \advance\pgf@y by.5\pgf@ya%
-    \advance\pgf@yb by.5\pgf@yc%
-    \pgfsys@transformcm{\pgfmathresult}{0}{0}{\pgfmathresult}{\pgf@x}{\pgf@y}%
-    \pgfsys@transformcm{1}{0}{0}{1}{-\pgf@xb}{-\pgf@yb}%
-  }%
-}
-
-
-
-
-%
-%
-% Graphic state saving and restoring.
-%
-%
-
-\def\pgfsys@beginscope{\pgf@sys@fail{scoping}}
-% Saves the current graphic state on a graphic state stack. All
-% changes to the graphic state parameters mentioned for \pgfsys@stroke
-% and \pgfsys@fill will be local to the current graphic state and will
-% the old values will be restored after endscope is used.
-%
-% WARNING: pdf and postscript differ with respect to the question of
-% whether the current path is part of the graphic state or not. For
-% this reason, you should never use this command unless the path is
-% currently empty. For example, it might be a good idea to use
-% discardpath prior to calling this command.
-
-\def\pgfsys@endscope{\pgf@sys@fail{scoping}}
-% Restores the last saved graphic state.
-
-\def\pgfsys@begin@idscope{%
-  \begingroup%
-    \edef\pgf@sys@cacheref{\pgfsys@id@refcurrent}%
-    \expandafter\let\expandafter\pgfsys@beg@save\csname pgf@sys@att@beg@\pgf@sys@cacheref\endcsname%
-    \expandafter\let\expandafter\pgfsys@end@save\csname pgf@sys@att@end@\pgf@sys@cacheref\endcsname%
-    \ifx\pgfsys@beg@save\relax%
-      \ifx\pgfsys@end@save\relax%
-      \else%
-        \pgfsys@call@save%
-      \fi%
-    \else%
-      \pgfsys@call@save%
-    \fi%
-    \pgfsys@invalidate@currentid%
-      \begingroup%
-}
-% Starts an "id scope" where the current value of \pgfsys@use@id and
-% \pgfsys@use@type is used. If the combination has been used before,
-% nothing happens. Otherwise, depending of the driver, a graphic
-% scope may or may not be created. To ensure that a graphic scope is
-% created, use \pgfsys@beginscope additionally.
-
-\def\pgfsys@call@save{%
-  \pgfsys@beginscope%
-  \pgfsys@beg@save%
-  \expandafter\global\expandafter\let\csname pgf@sys@att@beg@\pgfsys@id@refcurrent\endcsname\relax%
-  \expandafter\global\expandafter\let\csname pgf@sys@att@end@\pgfsys@id@refcurrent\endcsname\relax%
-}
-
-\def\pgfsys@end@idscope{
-      \endgroup%
-    \ifx\pgfsys@beg@save\relax%
-      \ifx\pgfsys@end@save\relax%
-      \else%
-        \pgfsys@call@end%
-      \fi%
-    \else%
-      \pgfsys@call@end%
-    \fi%
-  \endgroup
-}
-% Ends an id scope.
-
-\def\pgfsys@call@end{%
-  \pgfsys@end@save%
-  \pgfsys@endscope%
-}
-
-
-\def\pgfsys@begin@text{}
-% Inside a text box you should not use graphics command. However, TikZ
-% needs to insert some color commands at the beginnings of text
-% boxes. For most drivers, this is not a problem; except for SVG,
-% where every change of the graphics state opens a scope and needs a
-% closing scope. This command should be used at the beginning of text
-% boxes containing such color commands and the matching
-% \pgfsys@end@text at the end. If the box does not contain commands
-% that change the graphics state, this command is not needed.
-
-\def\pgfsys@end@text{}
-% Closes a \pgfsys@begin@text.
-
-
-
-%
-%
-% Id management (all of these commands have a default implementation
-% any typically need not be redefined by a driver)
-%
-%
-
-% The id count
-\newcount\pgf@sys@id@count
-
-\def\pgfsys@new@id#1{%
-  \edef#1{pgf\the\pgf@sys@id@count}%
-  \global\advance\pgf@sys@id@count by1\relax%
-}
-% Creates a new id and stores it in the macro #1.
-
-\def\pgfsys@use@id#1{%
-  \edef\pgf@sys@id@current@id{#1}%
-  \let\pgfsys@current@type\pgfutil@empty%
-}
-\let\pgf@sys@id@current@id\pgfutil@empty
-% Sets the id to be used for the next graphic object (group, box, or
-% path). The type is reset to be empty. #1 must be a macro name that
-% has previously been set using \pgfsys@new@id.
-%
-% Each combination of id and type can be used only once, on a second
-% use nothing happens.
-
-\def\pgfsys@clear@id{%
-  \let\pgf@sys@id@current@id\pgfutil@empty%
-}
-% Clears the current id, so nothing can be referenced.
-
-\def\pgfsys@use@type#1{%
-  \edef\pgfsys@current@type{#1}%
-  \pgfsys@register@type\pgfsys@current@type%
-}
-\let\pgfsys@current@type\pgfutil@empty
-% Sets the type to be used for the next graphic object.
-
-\def\pgfsys@append@type#1{%
-  \ifx\pgfsys@current@type\pgfutil@empty%
-    \pgfsys@use@type{#1}%
-  \else%
-    \pgfsys@use@type{\pgfsys@current@type.#1}%
-  \fi%
-}
-% Appends something to the current type
-
-\def\pgfsys@register@type#1{%
-  \expandafter\let\expandafter\pgf@sys@temp\csname pgf@sys@reg@type@#1\endcsname%
-  \ifx\pgf@sys@temp\relax%
-    {%
-      \c@pgf@counta\pgf@sys@type@count\relax%
-      \global\advance\c@pgf@counta by1\relax%
-      \edef\pgf@sys@type@count{\the\c@pgf@counta}%
-      \expandafter\xdef\csname pgf@sys@reg@type@#1\endcsname{y\the\c@pgf@counta}%
-    }%
-  \fi%
-}
-% Registers a type with the system. Must be called before any use of
-% the type
-\def\pgf@sys@reg@type@{}
-\def\pgf@sys@reg@type@background{b}
-\def\pgf@sys@reg@type@path{p}
-\def\pgf@sys@reg@type@text{t}
-\expandafter\def\csname pgf@sys@reg@type@background.path\endcsname{bp}
-\def\pgf@sys@type@count{0}
-
-\def\pgfsys@push@type{%
-  \expandafter\expandafter\expandafter\def\expandafter\expandafter\expandafter\pgf@sys@typestack%
-  \expandafter\expandafter\expandafter{\expandafter\expandafter\expandafter\def\expandafter\expandafter\expandafter\pgfsys@current@type%
-    \expandafter\expandafter\expandafter{\expandafter\pgfsys@current@type\expandafter}%
-    \expandafter\def\expandafter\pgf@sys@typestack\expandafter{\pgf@sys@typestack}}%
-}
-\let\pgf@sys@typestack\pgfutil@empty
-% Pushes the current type onto a global stack. This is useful for
-% temporarily changing the type without creating \TeX scopes.
-
-\def\pgfsys@pop@type{\pgf@sys@typestack}
-% Pops the last id from the stack.
-
-\def\pgfsys@id@ref#1#2{#1\csname pgf@sys@reg@type@#2\endcsname}
-% Expands to a text that can be inserted as a reference. #1 must be a
-% reference created \pgfsys@new@id, #2 must be a type that has been
-% registered using \pgfsys@id@register@type.
-
-\def\pgfsys@id@refcurrent{\pgfsys@id@ref{\pgf@sys@id@current@id}{\pgfsys@current@type}}
-% Expands to a text that can be inserted as a reference to the current
-% id-type pair in use.
-
-\def\pgfsys@invalidate@currentid{%
-  \expandafter\global\expandafter\let\csname pgf@sys@id@keylist@\pgfsys@id@refcurrent\endcsname\pgfutil@empty%
-}
-% Mark the current id-type pair as used.
-
-\def\pgfsys@attach@to@id#1#2#3#4{%
-  \pgfsys@register@type{#2}%
-  \expandafter\def\expandafter\pgf@sys@tempbeg\expandafter{\csname pgf@sys@att@beg@\pgfsys@id@ref{#1}{#2}\endcsname}%
-  \expandafter\def\expandafter\pgf@sys@tempend\expandafter{\csname pgf@sys@att@end@\pgfsys@id@ref{#1}{#2}\endcsname}%
-  \expandafter\ifx\pgf@sys@tempbeg\relax%
-    \expandafter\let\pgf@sys@tempbeg\pgfutil@empty%
-  \fi%
-  \expandafter\ifx\pgf@sys@tempend\relax%
-    \expandafter\let\pgf@sys@tempend\pgfutil@empty%
-  \fi%
-  \expandafter\let\expandafter\pgf@sys@tempbeg@cont\pgf@sys@tempbeg%
-  \expandafter\let\expandafter\pgf@sys@tempend@cont\pgf@sys@tempend%
-  \expandafter\expandafter\expandafter\gdef\expandafter\pgf@sys@tempbeg\expandafter{\pgf@sys@tempbeg@cont#3}%
-  \def\pgf@sys@temp{#4}%
-  \expandafter\expandafter\expandafter\expandafter\expandafter\expandafter\expandafter\gdef\expandafter\expandafter\expandafter\pgf@sys@tempend\expandafter\expandafter\expandafter{\expandafter\pgf@sys@temp\pgf@sys@tempend@cont}%
-}
-% Attaches some code to an id-type pair so that when the id's scope
-% gets created, #3 is added at the beginning and #4 is added at the
-% end.
-
-\def\pgfsys@if@fresh@id#1#2#3#4{%
-  \edef\pgf@sys@temp{#1}%
-  \ifx\pgf@sys@temp\pgfutil@empty% empty id always counts as "has been used"
-    #4%
-  \else%
-    \pgfsys@register@type{#2}%
-    \expandafter\ifx\csname pgf@sys@id@keylist@\pgfsys@id@ref{#1}{#2}\endcsname\pgfutil@empty%
-      % has already been used!
-      #4%
-    \else%
-      #3%
-    \fi%
-  \fi%
-}
-% Checks whether a given id-type pair #1-#2 has not been used, yet. If
-% so, #3 is executed, otherwise #4.
-
-\def\pgfsys@if@fresh@currentid#1#2{%
-  \ifx\pgf@sys@id@current@id\pgfutil@empty% empty id always counts as "has been used"
-    #2%
-  \else%
-    \expandafter\ifx\csname pgf@sys@id@keylist@\pgfsys@id@refcurrent\endcsname\pgfutil@empty%
-      % has already been used!
-      #2%
-    \else%
-      #1%
-    \fi%
-  \fi%
-}
-% Checks whether the current id-type pair in use has not been used,
-% yet. If so, #1 is executed, otherwise #2.
-
-
-
-
-%
-%
-% Special commands
-%
-%
-
-\def\pgfsys@imagesuffixlist{}
-% A list of suffixes, separated by `:', that will be tried when
-% searching for an image.
-
-
-
-%
-%
-% Transparency
-%
-%
-
-\def\pgfsys@opacity#1{\pgfsys@stroke@opacity{#1}\pgfsys@fill@opacity{#1}}
-% Ideally, this should sets the opacity of all operations, treating
-% the group as a transparency group with 1 meaning fully opaque, 0
-% meaning fully transparent. Since most drivers do not support this,
-% the fallback is to set the stroke and fill opacity at the same
-% time. This is not quite the same, however.
-
-\def\pgfsys@stroke@opacity#1{\pgf@sys@fail{opacity}}
-% Sets the opacity of stroking operations. 1 means fully opaque, 0
-% means fully transparent.
-
-\def\pgfsys@fill@opacity#1{\pgf@sys@fail{opacity}}
-% Sets the opacity of filling operations. 1 means fully opaque, 0
-% means fully transparent.
-
-\def\pgfsys@transparencygroupfrombox#1{\pgf@sys@fail{transparency groups}}
-% This takes a TeX box and converts it into a transparency
-% group. This means that any transparency settings apply to the box as
-% a whole. For instance, if a box contains two overlapping black
-% circles and you draw them normally with 50% transparency, then the
-% overlap will be darker than the rest. By comparison, if the circles
-% are part of a transparency group, the overlap will get the same
-% color as the rest.
-%
-% The following settings modify the behaviour of a transparency group:
-
-\newif\ifpgfsys@transparency@group@isolated
-\newif\ifpgfsys@transparency@group@knockout
-
-
-\def\pgfsys@blend@mode#1{\pgf@sys@fail{blend mode}}
-% Sets the current blend mode. See the PDF specification for details
-% on blend modes.
-
-
-\def\pgfsys@definemask{\pgf@sys@fail{image masks}}
-% This command declares a mask for usage with images. It works similar
-% to \pgfsys@defineimage: Certain macros are set when the command is
-% called. The result should be to set the macro \pgf@mask to a pdf
-% object count that can subsequently be used as a soft mask. The
-% following macros will be set when this command is invoked:
-%
-% - \pgf@filename
-%   File name of the mask to be defined.
-%
-% - \pgf@maskmatte
-%   The so-called matte of the mask (see the pdf documentation for
-%   details). The matte is a color specification consisting of 1, 3 or
-%   4 numbers between 0 and 1. The number of numbers depends on the
-%   number of color channels in the image (not in the mask!). It will
-%   be assumed that the image has been preblended with this color.
-
-\def\pgfsys@fadingfrombox#1#2{\pgf@sys@fail{fadings}}
-% Declares an fading named #1. The parameter #2 must be a
-% box. Its contents luminosity determines the opacity of the resulting
-% mask.
-
-\def\pgfsys@usefading#1#2#3#4#5#6#7{\pgf@sys@fail{fadings}}
-% Installs a previously declared fading #1 in the current graphics
-% state. Parameters #2 to #7 specify a transformation cm that should
-% be applied to the mask before it is used.
-
-\def\pgfsys@clipfading{}
-% This default implementation is a no-op for all drivers except `dvips'
-% where we have to set the clipping path _before_ installing the fading (used in
-% \pgfsetfadingforcurrentpath, \pgfsetfadingforcurrentpathstroked commands of
-% the basic layer)
-
-
-%
-%
-% Shading commands
-%
-%
-
-\def\pgfsys@horishading#1#2#3{\pgf@sys@fail{shadings}\pgf@sys@noshading{#1}}
-% Declares a horizontal shading for later use. The effect of this
-% command should be the definition of a macro called `@pgfshading#1!'
-% (or \csname @pdfshading#1!\endcsname, to be precise). When invoked,
-% this new macro should insert a shading at the current position.
-%
-% #1 is the name of the shading, which is also used in the output
-% macro name. #2 is the height of the shading and must be given as a
-% TeX dimension like `2cm' or `10pt'. #3 is a shading color
-% specification as specified in the pgfuserguide. The shading
-% specification implicitly fixes the width of the shading.
-%
-% When `@pgfshading#1!' is invoked, it should insert a box of height
-% #2 and the width implicit in the shading declaration.
-
-\def\pgfsys@vertshading#1#2#3{\pgf@sys@fail{shadings}\pgf@sys@noshading{#1}}
-% Like horishading, only for vertical shadings. This time, the height
-% of the shading is implicit in #3 and the width is given as #2.
-
-\def\pgfsys@radialshading#1#2#3{\pgf@sys@fail{shadings}\pgf@sys@noshading{#1}}
-% Declares a radial shading. Like the previous macros, this command
-% should setup the macro `@pgfshading#1!', which upon invocation
-% should insert a radial shading whose size is implicit in #3.
-%
-% The parameter #2 is a pgf point specification if the starting point
-% of the shading. See the pgfuserguide for details.
-
-\def\pgfsys@functionalshading#1#2#3#4{\pgf@sys@fail{shadings (functional)}\pgf@sys@noshading{#1}}
-% Declares a shading using a PostScript-like function that provides a
-% color for each point. Like the previous macros, this command
-% should setup the macro `@pgfshading#1!' so that it will produce a
-% box containing the desired shading.
-%
-% Parameter #1 is the name of the shading. Parameter #4 is a
-% Postscript-like function (type 4 function of the PDF specification)
-% as described in Section 3.9.4 of the PDF Specification version 1.7.
-% Parameter #2 and #3 are pgf point specifications that specifies the
-% lower left and upper right coordinate.
-%
-% When function #4 is evaluated, the coordinate of the current
-% point will be on the (virtual) PostScript stack in bp units. After
-% the function has been evaluated, the stack should consist of three
-% numbers (not integers! - the Apple PDF renderer is broken in this
-% regard, so add cvr's at the end if needed) that represent the red,
-% green, and blue components of the color.
-%
-% A buggy #4 will result is *totally unpredictable chaos* during
-% rendering.
-
-\def\pgf@sys@noshading#1{\expandafter\global\expandafter\let\csname @pgfshading#1!\endcsname=\pgfutil@empty}
-
-
-
-
-%
-%
-% Pattern stuff
-%
-%
-
-\def\pgfsys@declarepattern#1#2#3#4#5#6#7#8#9{\pgf@sys@fail{patterns}}
-% This command declares a new colored or uncolored pattern. Uncolored
-% patterns have no inherent color, the color is provided when they are
-% set. Colored patterns have an inherent color.
-% #1       = name of the pattern (must be a plain suffix for use in
-%            postscript/pdf/etc.)
-% #2 to #5 = four coordinates describing the corners of a bounding box
-%            of pattern cells
-% #6       = x-step
-% #7       = y-step
-% #8       = pattern code
-% #9       = 0 if uncolored pattern, 1 if colored pattern.
-
-\def\pgfsys@setpatternuncolored#1#2#3#4{\pgf@sys@fail{patterns}}
-% Sets an uncolored pattern #1 as filling color. The numbers #2, #3,
-% #4 must be an rgb-value to be used as the color of the pattern.
-
-\def\pgfsys@setpatterncolored#1{\pgf@sys@fail{patterns}}
-% Sets an colored pattern #1 as filling color.
-
-
-
-
-
-%
-%
-% Animations
-%
-%
-
-
-\newif\ifpgfsysanimationsupported
-% Will be set to true by a driver when animations are supported. Note
-% that snapshots are always supported.
-
-
-\def\pgfsys@animate#1{\pgf@sys@fail{animations}}
-% Adds an animation of the attribute #1 to the current scope.
-% The configuration of the animation (like start times, etc.) is taken
-% from the current values of the animation keys, which are configured
-% using calls to \pgfsys@animation@..., which setup an animation
-% key for the local scope. This means that you typically setup these
-% keys in a scope and at the end of the scope call \pgfsys@animate.
-%
-% Some keys accumulate (like begin or keytime), most do not. In those
-% cases, the last call overrides the previous one.
-%
-% Not all value types make sense or are allowed, it depends on the
-% specific \pgfsys@animate call.
-%
-% Example:
-%
-% {
-%   \pgfsys@animation@offset{10}{begin}%
-%   \pgfsys@animation@event{}{click}{1}{begin}%
-%   \pgfsys@animation@time{5}{1}{1}{0}{0}
-%   \pgfsys@animation@val@scalar{1}
-%   \pgfsys@animation@time{8}{1}{1}{0}{0}
-%   \pgfsys@animation@val@scalar{0.5}
-%   \pgfsys@animation@sum%
-%   \pgfsys@animate{fillopacity}%
-% }
-%
-% When a driver does not support a specific attribute #1, it should
-% issue a \pgf@sys@fail. Typical attributes are things like "opacity"
-% or "linewidth" or "dash".
-%
-% The following values are permissible for "#1":
-%
-% "opacity" adds an animation of the opacity.
-% Type: scalar
-%
-% "fillopacity" adds an animation of the fill opacity.
-% Type: scalar
-%
-% "strokeopacity" adds an animation of the stroke opacity.
-% Type: scalar
-%
-% "visibility" adds an animation of the visibility.
-% Type: text ("visible" or "hidden")
-%
-% "linewidth" adds an animation of the line width.
-% Type: dimension
-%
-% "dash" adds an animation of the dash.
-% Type: dash
-%
-% "translate" adds an animation of the transformation.
-% Type: translate
-%
-% "scale" adds an animation of the transformation.
-% Type: scale
-%
-% "rotate" adds an animation of the transformation.
-% Type: scalar
-%
-% "skewx" adds an animation of the transformation.
-% Type: scalar
-%
-% "skewy" adds an animation of the transformation.
-% Type: scalar
-%
-% "motion" adds a movement along a path.
-% Type: motion
-%
-% "strokecolor" adds an animation of the stroke color.
-% Type: color
-%
-% "fillcolor" adds an animation of the fill color.
-% Type: color
-%
-% "viewbox" adds an animation of the view box.
-% Type: view box
-%
-% "path" adds an animation of the path to the path specified by
-% \pgfsys@animation@whom
-% Type: path
-%
-% "syncbase" adds a sync base to the animation. A sync base does not animate
-% anything by itself, but other animations can begin and end relative
-% to it.
-%
-% "none" suppresses the animation
-% Type: any
-
-
-
-
-% Animation timing :
-%
-% You specify an animation using a timeline. A timeline consists of a
-% sequence of times together with values for these times. The times
-% must be given in increasing order. You use the command
-% \pgfsys@animation@time to specify a time and
-% \pgfsys@animation@val@... to specify a value. The time must be
-% specified first, the time--value is created when the value command is
-% used.
-%
-% Times are given in seconds (so 0.01 is one hundredth of a second).
-%
-% The animation's timeline will start with the first time mentioned
-% (not necessarily zero and not necessarily a positive value) and ends
-% with the last value. The duration is the difference between these
-% two values.
-
-\def\pgfsys@animation@restart@always{}
-% Specifies that the animation can always restart
-
-\def\pgfsys@animation@restart@never{}
-% Specifies that the animation should never restart
-
-\def\pgfsys@animation@restart@whennotactive{}
-% Specifies that the animation should only restart when it is not active
-
-\def\pgfsys@animation@repeat#1{}
-% #1 must be a number
-
-\def\pgfsys@animation@repeat@indefinite{}
-% Repeats forever
-
-\def\pgfsys@animation@repeat@dur#1{}
-% #1 must be a clock value
-
-\def\pgfsys@animation@freezeatend{}
-% Specifies that the last value of the animation remains in force at
-% the end
-
-\def\pgfsys@animation@removeatend{}
-% Specifies that the effect of the animation is removed at the end
-
-\def\pgfsys@animation@time#1#2#3#4#5{}
-% Specifies a time together with spline control points for the entry
-% and the exit to this time. The value #1 is a time in seconds (so 60
-% means 1 minute, 0.001 means one millisecond). The values #2 and #3
-% specify the control point of the spline *entering* the time point,
-% while the values #4 and #5 specify the control point of the spline
-% *leaving* the time point. They are all dimensionless values between
-% 0 and 1. For a linear animation, set the first two to 1 and the last
-% two to 0.
-%
-% Example:
-% \pgfsys@animation@time{5}{1}{1}{0.25}{0.1}
-% \pgfsys@animation@val@scalar{80}
-% \pgfsys@animation@time{8}{.75}{1}{0}{0}
-% \pgfsys@animation@val@scalar{90}
-%
-% In SVG, this will create the following entries:
-% begin     = +5s
-% duration  = 3s
-% keyTimes  = 0;1
-% values    = 80;90
-% keySpline = 0.25 0.1 0.75 1
-%
-% For the key spline, note that the entry spline controls of the first
-% time and the exit spline controls of the last point are dropped.
-%
-%
-% When the exit spline takes the special values #4="stay" and #5="0",
-% the attribute's value "stays" until the next value for the next time
-% (it "jumps" to the next value then). This corresponds, roughly, to
-% an "infinite" #4.
-%
-% Similarly, when the entry spline takes the special value #2="jump"
-% and #3="1", the value immediately jumps from the previous value to
-% the next value when the previous value was "created".
-
-\def\pgfsys@stay@text{{stay}{0}}
-\def\pgfsys@jump@text{{jump}{1}}
-
-\def\pgfsys@animation@base{}
-% Think of this command as setting the value of the attribute in the
-% timeline before the timeline starts. Normally, an animation only
-% influences the timeline while the animation is running (which may be
-% forever) and before and after the animation is running, the
-% attribute's value is not modified by the animation (so, it is just
-% inherited from the surrounding scope). When a base value is set,
-% while the animation is not running, this value is used. For most
-% attributes you can achieve the same effect by surrounding the
-% to-be-animated object by a scope and setting the value there, but
-% using bases is often more convenient and, for instance for the
-% visibility attribute, it is necessary to use a base.
-%
-% Note that when a backend driver does not support animations, base
-% values will not be depicted unless a snapshot is used explicitly.
-
-\def\pgfsys@animation@offset#1#2{}
-% #1 must be a value in seconds, #2 is the target "begin" or "end" to
-% which this offset is appended.
-
-\def\pgfsys@animation@syncbegin#1#2#3#4{}
-% #1 is the id of a sync base (obtained by
-% \pgfsys@new@id), #2 is the id type (or empty), #3 is an optional
-% offset, #4 is the target.
-
-\def\pgfsys@animation@syncend#1#2#3#4{}
-% Like the previous command.
-
-\def\pgfsys@animation@event#1#2#3#4#5{}
-% #1 is the optional id of another element (obtained by
-% \pgfsys@new@id), #2 is the optional type of the id, #3 is an event
-% name, #4 is an optional offset, #5 is the target.
-
-\def\pgfsys@animation@repeat@event#1#2#3#4#5{}
-% #1 is the optional id of another element, #2 is the type, #3 is a
-% repeat count, and #4 is an optional offset, #5 is the target.
-
-\def\pgfsys@animation@accesskey#1#2#3{}
-% #1 is a character, #2 is an optional offset, #3 is the target.
-
-\def\pgf@sys@begin@text{begin}
-
-
-% Accumulation
-
-\def\pgfsys@animation@accumulate{}
-% Corresponds to accumulate="sum" in SVG
-
-\def\pgfsys@animation@noaccumulate{}
-% Corresponds to accumulate="none" in SVG
-
-
-% Targeting
-
-\def\pgfsys@animation@whom#1#2{}
-% Sets the target of the animation. #1 must be an id previously
-% created using \pgfsys@new@id and #2 must be empty or a type
-% previously created using \pgfsys@new@id@type
-
-
-% Attribute definitions
-
-\def\pgfsys@animation@rotatealong{}
-% Applicable only to motion animations. Indicates that the
-% to-be-animated group should be rotated automatically so that it
-% points along the path as time progresses.
-
-\def\pgfsys@animation@norotatealong{}
-% Corresponds to rotate="0"
-
-\def\pgfsys@animation@movealong#1{}
-% Applicable only to motion animations. #1 is a softpath along which
-% the movement will be done.
-
-\def\pgfsys@animation@tip@markers#1#2{}
-% Applicable only to path animations. #1 and #2 are markers (declared
-% using \pgfsys@marker@declare) that store marker symbols to be added
-% at the start and at the end of the to-be-animated path. If empty, no
-% markers are added.
-
-\def\pgfsys@animation@canvas@transform#1#2{}
-% #1 is some code that may call \pgfsys@transformcm at most once. It
-% will be executed when a canvas transformation animation is
-% installed for a scope id. #2 is some further codes that may also
-% call \pgfsys@transformcm at most once. It will be installed right
-% after the animation.
-%
-% Typically, #1 is some pgf coordinate shift followed by
-% {\pgflowlevelsynccm} and #2 is \pgftransforminvert followed by
-% \pgflowlevelsynccm.
-
-
-
-% Values
-
-\def\pgfsys@animation@val@current{}
-% The current value of the attribute. At least with SVG, this can only
-% be used for the first value and, then, only if there is only one
-% other value.
-
-\def\pgfsys@animation@val@text#1{}
-% #1 should be some text.
-
-\def\pgfsys@animation@val@scalar#1{}
-% #1 should be a single value.
-
-\def\pgfsys@animation@val@dimension#1{}
-% #1 must be a dimension.
-
-\def\pgfsys@animation@val@color@rgb#1#2#3{}
-% #1,#2,#3 must be an rgb tuple
-
-\def\pgfsys@animation@val@color@cmyk#1#2#3#4{}
-% #1,#2,#3,#4 must be an cmyk tuple
-
-\def\pgfsys@animation@val@color@cmy#1#2#3{}
-% #1,#2,#3 must be an cmy tuple
-
-\def\pgfsys@animation@val@color@gray#1{}
-% #1 must be a gray value
-
-\def\pgfsys@animation@val@path#1{}
-% #1 must consist of path-construction tokens (as returned by the
-% softpath layer)
-
-\def\pgfsys@animation@val@translate#1#2{}
-% #1,#2 must be dimensions
-
-\def\pgfsys@animation@val@scale#1#2{}
-% #1,#2 must be dimensionless
-
-\def\pgfsys@animation@val@viewbox#1#2#3#4{}
-% #1,#2 describe the lower left, #3,#4 the upper right corner of the
-% view box.
-
-\def\pgfsys@animation@val@dash#1#2{}
-% #1,#2 have the syntax of \pgfsys@setdash.
-
-
-
-%
-%
-% Markers
-%
-%
-
-\def\pgfsys@marker@declare#1#2{%
-  {%
-    \pgfpicturetrue%
-    \pgfsysprotocol@getcurrentprotocol\pgfsys@marker@temp%
-    \pgfsysprotocol@setcurrentprotocol\pgfutil@empty%
-    \pgfsysprotocol@bufferedtrue%
-    \pgfsys@beginscope%
-    #2%
-    \pgfsys@endscope%
-    \xdef#1{\the\pgf@sys@id@count}%
-    \expandafter\expandafter\expandafter\global\expandafter\pgfsysprotocol@getcurrentprotocol\csname pgf@sys@marker@prot@#1\endcsname%
-    \pgfsys@marker@declare@% courtesy hook
-    \pgfsysprotocol@setcurrentprotocol\pgfsys@marker@temp%
-    \global\advance\pgf@sys@id@count by1\relax%
-  }%
-}
-\let\pgfsys@marker@declare@\relax
-% Declares a new marker symbol whose code is in #2. #1 should be a
-% macro name, which will be set to a unique
-% value by which the marker can be referenced later on. #2 should be
-% code that, when executed, produces recordable code.
-
-\def\pgfsys@marker@use#1{%
-  \pgfsysprotocol@literal{\csname pgf@sys@marker@prot@#1\endcsname}%
-}
-% Draws the marker symbol not at the end of a path, but simply with
-% the current transformation matrix
-
-
-
-
-
-
-%
-%
-% RDF
-%
-%
-
-\def\pgfsys@rdf@about#1{\pgf@sys@fail{rdf}}
-% Adds the rdf attribute "about" with value #1 to the next
-% idscope. The RDF-spec says: "a SafeCURIEorCURIEorIRI, used for
-% stating what the data is about (a 'subject' in RDF terminology);"
-
-\def\pgfsys@rdf@content#1{\pgf@sys@fail{rdf}}
-% Adds the rdf attribute content with value #1 to the next
-% idscope. The RDF-spec says: "a CDATA string, for supplying
-% machine-readable content for a literal (a 'literal object', in RDF
-% terminology);"
-
-\def\pgfsys@rdf@datatype#1{\pgf@sys@fail{rdf}}
-% Adds the rdf attribute datatype with value #1 to the next
-% idscope. The RDF-spec says: "a TERMorCURIEorAbsIRI representing a
-% datatype, to express the datatype of a literal;"
-
-\def\pgfsys@rdf@href#1{\pgf@sys@fail{rdf}}
-% Adds the rdf attribute href with value #1 to the next idscope
-% The RDF-spec says: "a traditionally navigable IRI for
-% expressing the partner resource of a relationship (a 'resource
-% object', in RDF terminology);"
-
-\def\pgfsys@rdf@inlist{\pgf@sys@fail{rdf}}
-% Adds the rdf attribute inlist to the next idscope. The
-% RDF-spec says: "An attribute used to indicate that the object
-% associated with a rel or property attribute on the same element is
-% to be added to the list for that predicate. The value of this
-% attribute must be ignored. Presence of this attribute causes a list
-% to be created if it does not already exist."
-
-\def\pgfsys@rdf@prefix#1{\pgf@sys@fail{rdf}}
-% Adds #1 to the list of the rdf prefix attribute to the next
-% idscope. Can be called several times, in which case all values of #1
-% are concatenated with whitespaces. The RDF-spec says: "a white space
-% separated list of prefix-name IRI pairs of the form NCName ':' ' '+
-% xsd:anyURI"
-
-\def\pgfsys@rdf@property#1{\pgf@sys@fail{rdf}}
-% Adds #1 to the list of the rdf property attribute to the next
-% idscope. Can be called repeatedly. The RDF-spec says: "a white space
-% separated list of TERMorCURIEorAbsIRIs, used for expressing
-% relationships between a subject and either a resource object if
-% given or some literal text (also a 'predicate');"
-
-\def\pgfsys@rdf@rel#1{\pgf@sys@fail{rdf}}
-% Adds #1 to the list of the rdf rel attribute to the next
-% next idscope. Can be called repeatedly. The
-% RDF-spec says: "a white space separated list of
-% TERMorCURIEorAbsIRIs, used for expressing relationships between two
-% resources ('predicates' in RDF terminology);"
-
-\def\pgfsys@rdf@resource#1{\pgf@sys@fail{rdf}}
-% Adds the rdf attribute resource with value #1 to the next idscope. The
-% RDF-spec says: "a SafeCURIEorCURIEorIRI for expressing the partner
-% resource of a relationship that is not intended to be navigable
-% (e.g., a 'clickable' link) (also an 'object');"
-
-\def\pgfsys@rdf@rev#1{\pgf@sys@fail{rdf}}
-% Adds #1 to the list of the rdf rev attribute to the next
-% idscope. Can be called repeatedly. The
-% RDF-spec says: "a white space separated list of
-% TERMorCURIEorAbsIRIs, used for expressing reverse relationships
-% between two resources (also 'predicates');
-
-\def\pgfsys@rdf@src#1{\pgf@sys@fail{rdf}}
-% Adds an rdf attribute src with value #1 to the next idscope. The
-% RDF-spec says: "an IRI for expressing the partner resource of a
-% relationship when the resource is embedded (also a 'resource
-% object');"
-
-\def\pgfsys@rdf@typeof#1{\pgf@sys@fail{rdf}}
-% Adds #1 to the list of the rdf typeof attribute to the next
-% idscope. Can be called repeatedly. The
-% RDF-spec says: "a white space separated list of TERMorCURIEorAbsIRIs
-% that indicate the RDF type(s) to associate with a subject;"
-
-\def\pgfsys@rdf@vocab#1{\pgf@sys@fail{rdf}}
-% Adds an rdf attribute vocab with value #1 to the next idscope. The
-% RDF-spec says: "an IRI that defines the mapping to use when a TERM
-% is referenced in an attribute value. See General Use of Terms in
-% Attributes and the section on Vocabulary Expansion."
-
-
-
-%
-%
-% Page size stuff
-%
-%
-
-\def\pgfsys@papersize#1#2{\pgf@sys@fail{papersize}}
-% This command sets the paper size in a portable way. It tries to do
-% so "locally" for the current page, but what really happens depends
-% strongly on the driver. For instance, dvips will use whatever is
-% used with the first call to this command that is part of the
-% shipped-out document and will ignore all other uses. In contrast,
-% pdftex will use the current value of the papersize for each page
-% and, additionally, setting the papersize is local to the current TeX
-% group.
-% #1 = width
-% #2 = height
-
-\def\pgfsys@global@papersize#1#2{\pgfsys@papersize{#1}{#2}}
-% This command does the same as the papersize command, only for
-% drivers that support this, \global is used to set the papersize.
-% #1 = width
-% #2 = height
-
-\def\pgfsys@prepare@papersize#1#2{\pgfsys@papersize{#1}{#2}}
-% Like \pgfsys@papersize, this prepares the paper size in a portable
-% way -- but it is supposed to be a preparation step before the
-% document has started. Drivers may decide to postpone the action
-% until the document has started.
-%
-% The root cause why I added this method is that image externalization
-% seems to suffer from the fact that some drivers need a "prepared"
-% routine whereas others must not have a prepared routine and have to
-% apply the action right-away. This method is the solution for image
-% externalization.
-% #1 = width
-% #2 = height
-
-\ifx\paperheight\@undefined
-  \def\pgfsys@thepageheight{\the\vsize} % this is wrong, but I do not
-                                % know how to compute the page height
-                                % in plain tex.
-  \def\pgfsys@thepagewidth{\the\hsize}
-\else
-  \def\pgfsys@thepageheight{\paperheight}
-  \def\pgfsys@thepagewidth{\paperwidth}
-\fi
-
-
-%
-%
-% Position tracking commands
-%
-%
-
-% Marks the current position on the page. This position can later be
-% referenced using \pgfsys@getposition
-\def\pgfsys@markposition#1{\pgf@sys@fail{marking the current position}}
-
-% Sets #2 to a pgfpoint macro that returns the position #1 is
-% returned in a coordinate system where the x-axis goes right and the
-% y-axis goes up. The origin of this coordinate system may or may not
-% lie in the lower left corner; you should shift the coordinate system
-% to the position "pgfpageorigin" to make sure that the origin is at
-% the lower left corner. Typically, getting this position
-% requires two runs of TeX. On the first run, the macro will be set to
-% \relax, indicating that the position is not available.
-%
-% If #1 is set to the special position "pgfpageorigin", the position
-% of the the lower left page corner is returned.
-
-\def\pgfsys@getposition#1#2{\let#2=\relax}
-
-
-
-%
-%
-% Commands having a default implementation. These commands only need
-% not be implemented by drivers if this results in a better
-% performance.
-%
-%
-
-
-\def\pgfsys@shadingoutsidepgfpicture#1{%
-  #1%
-}
-% This command gets the definition of a shading (@pgfshadingxxxx!) as
-% an argument and should insert this shading into the normal text.
-%
-% This command has a default implementation.
-
-
-\def\pgfsys@shadinginsidepgfpicture#1{%
-  \pgf@makehbox{#1}%
-  \setbox\pgf@hbox=\hbox{\hskip-.5\wd\pgf@hbox\lower.5\ht\pgf@hbox\hbox{\box\pgf@hbox}}%
-  \pgfqbox{\pgf@hbox}%
-}
-% This command works like \pgfsys@shadingoutsidepgfpicture, only it is
-% called when a shading should be inserted inside a picture. This
-% command should insert the shading centered on the origin (which will
-% typically have been low-level translated somewhere else.)
-%
-% This command has a default implementation.
-
-
-\def\pgfsys@hbox#1{%
-  \pgfsys@begin@idscope%
-  \pgfsys@beginscope%
-    \setbox#1=\hbox{\box#1}%
-    \wd#1=0pt%
-    \ht#1=0pt%
-    \dp#1=0pt%
-    \box#1%
-  \pgfsys@endscope%
-  \pgfsys@end@idscope%
-}
-% Called to insert a TeX hbox into a pgfpicture.
-
-\def\pgfsys@hboxsynced#1{%
-  \pgfsys@beginscope\pgflowlevelsynccm\pgfsys@hbox#1\pgfsys@endscope%
-}%
-% Called to insert box #1 into a pgfpicture, but with the current
-% coordinate transformation matrix synced with the canvas
-% transformation matrix and surrounded by a scope.
-%
-% In essence, this command does the same as if you first said
-% \pgflowlevelsynccm and then \pgfsys@hbox#1. However, a
-% ``TeX-translation'' is used for the translation part of the
-% transformation cm. This will ensure that hyperlinks ``survive'' at
-% least translations.
-
-\def\pgfsys@pictureboxsynced#1{%
-  {%
-    \setbox0=\hbox{\pgfsys@beginpicture\box#1\pgfsys@endpicture}%
-    \pgfsys@hboxsynced0%
-  }%
-}
-% Basically, this should do the same as doing a (scoped) low level sync
-% followed by inserting the box #1 directly into the output
-% stream. However, the default implementation uses \pgfsys@hboxsynced
-% in conjunction with \pgfsys@beginpicture to ensure that, if
-% possible, hyperlinks survive in pdfs. Drivers that are sensitive to
-% picture-in-picture scopes should replace this implementation by
-% \pgfsys@beginscope\pgflowlevelsynccm\box#1\pgfsys@endscope
-
-\def\pgfsys@beginpicture{}
-% Called at the beginning of a pgfpicture. Used to setup things.
-
-\def\pgfsys@endpicture{}
-% Called at the end of a pgfpicture.
-
-\def\pgfsys@typesetpicturebox#1{%
-  \pgf@ya=\pgf@shift@baseline\relax%
-  \advance\pgf@ya by-\pgf@picminy\relax%
-  %
-  %
-  \advance\pgf@picmaxy by-\pgf@picminy\relax% maxy is now the height
-  \advance\pgf@picmaxx by-\pgf@picminx\relax% maxx is now the width
-  \setbox#1=\hbox{\hskip-\pgf@picminx\lower\pgf@picminy\box#1}%
-  \ht#1=\pgf@picmaxy%
-  \wd#1=\pgf@picmaxx%
-  \dp#1=0pt%
-  \leavevmode%
-  \pgf@xa=\pgf@trimleft@final\relax  \ifdim\pgf@xa=0pt \else\kern\pgf@xa\fi
-  \raise-\pgf@ya\box#1%
-  \pgf@xa=\pgf@trimright@final\relax \ifdim\pgf@xa=0pt \else\kern\pgf@xa\fi
-}
-% Called after a picture has been typeset in box #1. This
-% command should insert the box into the normal TeX code. The box #1
-% will still be a ``raw'' box that contains only the \special's. The
-% job of this command is to resize and shift this box according to the
-% baseline shift and the size of the box.
-%
-% This command has a default implementation.
-
-\def\pgfsys@beginpurepicture{\pgfsys@beginpicture}
-% This version of the beginpicture command can be used for pictures
-% that are guaranteed not to contain any hboxes. In this case, a
-% driver might provide a more compact version of the command.
-
-\def\pgfsys@endpurepicture{\pgfsys@endpicture}
-% Called at the end of a ``pure'' pgfpicture.
-
-\def\pgfsys@defineimage{%
-  \ifx\pgf@imagewidth\pgfutil@empty\else\edef\pgf@imagewidth{width=\pgf@imagewidth,}\fi%
-  \ifx\pgf@imageheight\pgfutil@empty\else\edef\pgf@imageheight{height=\pgf@imageheight,}\fi%
-  \ifx\pgf@imagepage\pgfutil@empty\else\edef\pgf@imagepage{page=\pgf@imagepage,}\fi%
-  \edef\pgf@image{\noexpand\includegraphics[\pgf@imageheight\pgf@imagewidth]{\pgf@filename}}%
-}
-% Called, when an image should be defined.
-%
-% This command does not take any parameters. Instead, certain macros
-% will be preinstalled with appropriate values when this command is
-% invoked. These are:
-%
-% - \pgf@filename
-%   File name of the image to be defined.
-%
-% - \pgf@imagewidth
-%   Will be set to the desired (scaled) width of the image.
-%
-% - \pgf@imageheight
-%   Will be set to the desired (scaled) height of the image.
-%
-%   If this macro and also the height macro are empty, the image
-%   should have its `natural' size.
-%
-%   If exactly only of them is specified, the undefined value the
-%   image is scaled so that the aspect ratio is kept.
-%
-%   If both are set, the image is scaled in both directions
-%   independently, possibly changing the aspect ratio.
-%
-%
-% The following macros presumable mostly make sense for drivers that
-% can handle pdf:
-%
-% - \pgf@imagepage
-%   The desired page number to be extracted from a multi-page
-%   `image'.
-%
-% - \pgf@imagemask
-%   If set, it will be set to `/SMask x 0 R', where x is the pdf
-%   object number of a soft mask to be applied to the image.
-%
-% - \pgf@imageinterpolate
-%   If set, it will be set to `/Interpolate true' or  `/Interpolate
-%   false', indicating whether the image should be interpolated in
-%   pdf.
-%
-%
-% The command should now setup the macro \pgf@image such that calling
-% this macro will result in typesetting the image. Thus, \pgf@image is
-% the `return value' of the command.
-
-
-\def\pgfsys@defobject#1#2#3#4{%
-  \pgfsysprotocol@getcurrentprotocol\pgfsys@temp%
-  {%
-    \pgfpicturetrue%
-    \pgfsysprotocol@setcurrentprotocol\pgfutil@empty%
-    \pgfsysprotocol@bufferedtrue%
-    \pgfsys@beginscope%
-    #4%
-    \pgfsys@endscope%
-    \pgfsysprotocol@getcurrentprotocol\pgfsys@@temp%
-    \expandafter\global\expandafter\let\csname #1\endcsname=\pgfsys@@temp%
-  }%
-  \pgfsysprotocol@setcurrentprotocol\pgfsys@temp%
-}
-% Declares an object for later use. The idea is that the object can be
-% precached in some way and then be rendered more quickly when used
-% several times. For example, an arrow head might be defined and
-% prerendered in this way.
-%
-% The parameter #1 is the name for later use. #2 and #3 are pgf points
-% specifying a bounding box for the object. #4 is the code for the
-% object. The code may only contain protocolable code.
-
-
-\def\pgfsys@useobject#1#2{%
-  \pgfsysprotocol@getcurrentprotocol\pgfsys@temp%
-  {%
-    \pgfsysprotocol@setcurrentprotocol\pgfutil@empty%
-    \pgfsysprotocol@bufferedfalse%
-    #2%
-    \expandafter\pgfsysprotocol@setcurrentprotocol\csname #1\endcsname%
-    \pgfsysprotocol@invokecurrentprotocol%
-  }%
-  \pgfsysprotocol@setcurrentprotocol\pgfsys@temp%
-}
-% Renders a previously declared object. The first parameter is the
-% name of the object. The second parameter is extra code that
-% should be executed right *before* the object is rendered. Typically,
-% this will be some transformation code.
-
-
-\def\pgfsys@begininvisible{\pgfsys@transformcm{1}{0}{0}{1}{2000bp}{2000bp}}
-% Between this command and the closing endinvisible, all output should
-% be suppressed. Nothing should be drawn at all, which includes all
-% paths, images and shadings. This command typically should not open a
-% graphic scope.
-
-\def\pgfsys@endinvisible{\pgfsys@transformcm{1}{0}{0}{1}{-2000bp}{-2000bp}}
-% Ends the invisibility section, unless invisibility blocks have been
-% nested. In this case, only the `last' one restores visibility.
-
-\def\pgfsys@begininvisiblescope{\pgfsys@beginscope\pgfsys@begininvisible}
-% Works like pgfsys@begininvisible, but it may open a graphics scope.
-
-\def\pgfsys@endinvisiblescope{\pgfsys@endinvisible\pgfsys@endscope}
-% Closes the invisibility scope.
-
-
-\def\pgfsys@atbegindocument{}
-% This command will be executed at the begin of the document. If for
-% whatever reason this is not done, you may wish to execute this
-% command yourself. It will setup certain specials that need to be
-% inserted into the resulting .pdf/.ps/.xxx file.
-
-
-% String comparison
-\ifdefined\pdfstrcmp
-  \let\pgfsys@strcmp\pdfstrcmp
-\else\ifdefined\strcmp
-  \let\pgfsys@strcmp\strcmp
-\else\ifdefined\directlua
-  \directlua{
-  local lft = lua.get_functions_table()
-  lft[\string#lft+1] = function()
-      local lhs = token.scan_string()
-      local rhs = token.scan_string()
-      if lhs < rhs then
-          tex.sprint(-2, "-1")
-      elseif lhs == rhs then
-          tex.sprint(-2, "0")
-      else
-          tex.sprint(-2, "1")
-      end
-  end
-  token.set_lua("pgfsys@strcmp", \string#lft, "global")
-  }
-\else
-  \def\pgfsys@strcmp#1#2{\pgf@sys@fail{string comparison}}%
-\fi\fi\fi
-
-
-% Discern the driver:
-
-% Default driver:
-\ifx\pgfsysdriver\@undefined
-  \pgfutil@guessdriver
-\fi
-
-\input pgf.cfg
-
-\immediate\write-1{Driver file for pgf: \pgfsysdriver}
-\pgfutil@InputIfFileExists{\pgfsysdriver}{}{%
-  \pgferror{Driver file ``\pgfsysdriver'' not found.}}
-
-
-
-% This will insert always-present-specials at the beginning of the
-% code.
-\AtBeginDocument{
-  \pgfsys@atbegindocument
-  \let\pgfsys@atbegindocument=\pgfutil@empty
-}
-
-
-
-% Read aux file in plain and context mode:
-
-\pgfutil@aux@read@hook
-
-
-\endinput