@lofcz/tikz 0.1.0 → 0.2.0

package/runtime/dist/bundles/latex-extra/files/tex/generic/pgf/basiclayer/pgfcorepathconstruct.code.tex

@@ -1,1477 +0,0 @@
-% Copyright 2019 by Till Tantau
-%
-% This file may be distributed and/or modified
-%
-% 1. under the LaTeX Project Public License and/or
-% 2. under the GNU Public License.
-%
-% See the file doc/generic/pgf/licenses/LICENSE for more details.
-
-\ProvidesFileRCS{pgfcorepathconstruct.code.tex}
-
-
-\newdimen\pgf@path@lastx
-\newdimen\pgf@path@lasty
-
-\let\pgfgetpath=\pgfsyssoftpath@getcurrentpath
-\let\pgfsetpath=\pgfsyssoftpath@setcurrentpath
-
-
-
-% Replace corners by arcs.
-%
-% #1 = in-size of arc
-% #2 = out-size of arc
-%
-% Description:
-%
-% This command influences path construction command like
-% \pgfpathlineto or \pgfpatharc. It will cause the corners at the end
-% of these commands to be replaced by little arcs. If the
-% corner is a 90 degrees corner and if #1=#2, a quarter-circle of
-% radius #1 is put in place of the corner. If #1 and #2 are different,
-% the quarter circle will instead by a quarter ellipse. If the angle
-% is different from 90 degrees, a deformed quarter circle will
-% result, which may or may not be desirable. For a ``perfect'' arc you
-% must use the \pgfpatharc command.
-%
-%
-% Example: One rounded corner.
-%
-% \pgfpathmoveto{\pgfpointxy{0}{0}}
-% \pgfsetcornersarced{4pt}{4pt}
-% \pgfpathlineto{\pgfpointxy{0}{1}}
-% \pgfpathlineto{\pgfpointxy{1}{1}}
-% \pgfstroke
-%
-% Example: A rounded rectangle
-%
-% \pgfsetcornersarced{4pt}{4pt}
-% \pgfpathrectangle{\pgfpointorigin}{\pgfpoint{1cm}{1cm}}
-% \pgfstroke
-%
-% Example: A rounded triangles
-%
-% \pgfsetcornersarced{4pt}{4pt}
-% \pgfpathmoveto{\pgfpointorigin}
-% \pgfpathlineto{\pgfpoint{1cm}{0cm}}
-% \pgfpathlineto{\pgfpoint{1cm}{1cm}}
-% \pgfpathclose
-% \pgfstroke
-
-\newif\ifpgf@arccorners
-
-\def\pgfsetcornersarced#1{%
-  \pgf@process{#1}%
-  \edef\pgf@corner@arc{{\the\pgf@x}{\the\pgf@y}}%
-  \pgf@arccornerstrue%
-  \ifdim\pgf@x=0pt%
-    \ifdim\pgf@y=0pt\relax%
-      \pgf@arccornersfalse%
-    \fi%
-  \fi%
-}
-
-\def\pgf@roundcornerifneeded{%
-  \ifpgf@arccorners\expandafter\pgfsyssoftpath@specialround\pgf@corner@arc\fi%
-}
-
-
-
-% The following protocol the passed sizes and all the corresponding
-% softpath commands. The nonlinear transformation (nlt) module
-% overwrites these commands.
-
-\def\pgf@lt@moveto#1#2{%
-  \pgf@protocolsizes{#1}{#2}%
-  \pgfsyssoftpath@moveto{\the#1}{\the#2}%
-}
-\def\pgf@lt@lineto#1#2{%
-  \pgf@protocolsizes{#1}{#2}%
-  \pgfsyssoftpath@lineto{\the#1}{\the#2}%
-}
-\def\pgf@lt@curveto#1#2#3#4#5#6{%
-  \pgf@protocolsizes{#1}{#2}%
-  \pgf@protocolsizes{#3}{#4}%
-  \pgf@protocolsizes{#5}{#6}%
-  \pgfsyssoftpath@curveto{\the#1}{\the#2}{\the#3}{\the#4}{\the#5}{\the#6}%
-}
-
-\let\pgf@lt@closepath\pgfsyssoftpath@closepath
-
-\let\pgf@nlt@moveto\pgf@lt@moveto
-\let\pgf@nlt@lineto\pgf@lt@lineto
-\let\pgf@nlt@curveto\pgf@lt@curveto
-\let\pgf@nlt@closepath\pgf@lt@closepath
-
-\let\pgf@nlt@list\pgfutil@empty % If non-empty, the nlt module is active
-
-
-% Move current point to #1.
-%
-% #1 = new current point
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfxy(0,0)}
-% \pgfpathlineto{\pgfxy(0,1)}
-% \pgfstroke
-
-\def\pgfpathmoveto#1{%
-  \pgfpointtransformed{#1}%
-  \pgf@nlt@moveto{\pgf@x}{\pgf@y}%
-  \global\pgf@path@lastx=\pgf@x%
-  \global\pgf@path@lasty=\pgf@y%
-}
-
-\def\pgf@protocolsizes#1#2{%
-  \ifpgf@relevantforpicturesize%
-    \ifdim#1<\pgf@picminx\global\pgf@picminx#1\fi%
-    \ifdim#1>\pgf@picmaxx\global\pgf@picmaxx#1\fi%
-    \ifdim#2<\pgf@picminy\global\pgf@picminy#2\fi%
-    \ifdim#2>\pgf@picmaxy\global\pgf@picmaxy#2\fi%
-    \ifpgf@size@hooked%
-      \let\pgf@size@hook@x#1\let\pgf@size@hook@y#2\pgf@path@size@hook%
-    \fi%
-  \fi%
-  \ifdim#1<\pgf@pathminx\global\pgf@pathminx#1\fi%
-  \ifdim#1>\pgf@pathmaxx\global\pgf@pathmaxx#1\fi%
-  \ifdim#2<\pgf@pathminy\global\pgf@pathminy#2\fi%
-  \ifdim#2>\pgf@pathmaxy\global\pgf@pathmaxy#2\fi%
-}
-\newif\ifpgf@size@hooked
-\let\pgf@path@size@hook=\pgfutil@empty%
-
-\def\pgf@resetpathsizes{%
-  \global\pgf@pathmaxx=-16000pt\relax%
-  \global\pgf@pathminx=16000pt\relax%
-  \global\pgf@pathmaxy=-16000pt\relax%
-  \global\pgf@pathminy=16000pt\relax%
-}
-
-\def\pgf@getpathsizes#1{%
-  \edef#1{{\the\pgf@pathmaxx}{\the\pgf@pathminx}{\the\pgf@pathmaxy}{\the\pgf@pathminy}}%
-}
-\def\pgf@setpathsizes#1{%
-  \expandafter\pgf@@setpathsizes#1%
-}
-\def\pgf@@setpathsizes#1#2#3#4{%
-  \global\pgf@pathmaxx=#1\relax%
-  \global\pgf@pathminx=#2\relax%
-  \global\pgf@pathmaxy=#3\relax%
-  \global\pgf@pathminy=#4\relax%
-}
-
-
-
-
-
-% Append a line from the current point to #1 to the current path.
-%
-% #1 = end of line
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfxy(0,0)}
-% \pgfpathlineto{\pgfxy(0,1)}
-% \pgfstroke
-
-\def\pgfpathlineto#1{%
-  \pgfpointtransformed{#1}%
-  \pgf@roundcornerifneeded%
-  \pgf@nlt@lineto{\pgf@x}{\pgf@y}%
-  \global\pgf@path@lastx=\pgf@x%
-  \global\pgf@path@lasty=\pgf@y%
-}
-
-
-
-% Close the current path.
-%
-% Example:
-%
-% % Draws two triangles
-% \pgfpathmoveto{\pgfxy(0,0)}
-% \pgfpathlineto{\pgfxy(0,1)}
-% \pgfpathlineto{\pgfxy(1,0)}
-% \pgfclosepath
-% \pgfpathmoveto{\pgfxy(2,0)}
-% \pgfpathlineto{\pgfxy(2,1)}
-% \pgfpathlineto{\pgfxy(3,0)}
-% \pgfpathclose
-% \pgfstroke
-
-\def\pgfpathclose{%
-  \pgf@roundcornerifneeded%
-  \pgf@nlt@closepath%
-}
-
-
-% Append a cubic bezier spline from the current point to #3 with control
-% points #1 and #2 to the current path.
-%
-% #1 = first control point
-% #2 = second control point
-% #3 = end point
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfpointxy{0}{0}}
-% \pgfpathcurveto{\pgfpointxy{0}{1}}{\pgfpointxy{1}{1}}{\pgfpointxy{1}{2}}
-% \pgfstroke
-
-\def\pgfpathcurveto#1#2#3{%
-  \pgfpointtransformed{#3}%
-  \pgf@xb=\pgf@x%
-  \pgf@yb=\pgf@y%
-  \pgfpointtransformed{#2}%
-  \pgf@xa=\pgf@x%
-  \pgf@ya=\pgf@y%
-  \pgfpointtransformed{#1}%
-  \pgf@roundcornerifneeded%
-  \pgf@nlt@curveto{\pgf@x}{\pgf@y}{\pgf@xa}{\pgf@ya}{\pgf@xb}{\pgf@yb}%
-  \global\pgf@path@lastx=\pgf@xb%
-  \global\pgf@path@lasty=\pgf@yb%
-}
-
-
-
-% Append a quadratic bezier spline from the current point to #2 with
-% control point #1 to the current path.
-%
-% #1 = control point
-% #2 = end point
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfpointxy{0}{0}}
-% \pgfpathquadraticcurveto{\pgfpointxy{1}{1}}{\pgfpointxy{2}{0}}
-% \pgfstroke
-
-\def\pgfpathquadraticcurveto#1#2{%
-  \pgfpointtransformed{#2}%
-  \pgf@xb=\pgf@x%
-  \pgf@yb=\pgf@y%
-  \pgfpointtransformed{#1}%
-  \pgf@xc=.6666666\pgf@x%
-  \pgf@yc=.6666666\pgf@y%
-  % compute second control point:
-  \pgf@xa=.33333333\pgf@xb%
-  \pgf@ya=.33333333\pgf@yb%
-  \advance\pgf@xa by\pgf@xc%
-  \advance\pgf@ya by\pgf@yc%
-  % compute first control point
-  \advance\pgf@xc by.3333333\pgf@path@lastx%
-  \advance\pgf@yc by.3333333\pgf@path@lasty%
-  \pgf@roundcornerifneeded%
-  \pgf@nlt@curveto{\pgf@xc}{\pgf@yc}{\pgf@xa}{\pgf@ya}{\pgf@xb}{\pgf@yb}%
-  \global\pgf@path@lastx=\pgf@xb%
-  \global\pgf@path@lasty=\pgf@yb%
-}
-
-
-
-
-% Append an arc to the current point, where the current point is at
-% angle #1 and the end is at angle #2. If #2 > #1, the arc is drawn
-% counter-clockwise, otherwise it is clockwise.
-%
-% #1 = angle of first point
-% #2 = angle of second point
-% #3 = radius or x-radius/y-radius
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfxy(0,0)}
-% \pgfpatharc{0}{90}{2cm}
-% \pgfstroke
-
-\def\pgfpatharc#1#2#3{%
-  {%
-    \pgfmathparse{#1}\let\pgf@temp@a=\pgfmathresult%
-    \pgfmathparse{#2}\let\pgf@temp@b=\pgfmathresult%
-    \pgfutil@in@{and }{#3}%
-    \ifpgfutil@in@%
-      \pgf@arc@get@radii#3\pgf@arc@stop%
-    \else
-      \pgf@arc@get@radii#3and #3\pgf@arc@stop%
-    \fi%
-    \pgf@arc@local@angle@a=\pgf@temp@a pt%
-    \pgf@arc@local@angle@b=\pgf@temp@b pt%
-    \loop%
-      \pgfutil@tempdima=\pgf@arc@local@angle@a%
-      \advance\pgfutil@tempdima by-\pgf@arc@local@angle@b\relax%
-      \ifdim\pgfutil@tempdima<0pt\relax%
-        \pgfutil@tempdima=-\pgfutil@tempdima\relax%
-      \fi%
-    \ifdim\pgfutil@tempdima>90pt\relax%
-      \ifdim\pgfutil@tempdima>115pt\relax%
-        \pgf@arc@temp=90pt% big skip
-      \else%
-        \pgf@arc@temp=60pt% smaller skip to ensure wide segments
-                          % (important shortened end segments because
-                          % of arrow tips)
-      \fi%
-      \ifdim\pgf@arc@local@angle@b>\pgf@arc@local@angle@a\relax%
-        {%
-          \pgf@arc@local@angle@b=\pgf@arc@local@angle@a\relax%
-          \advance\pgf@arc@local@angle@b by\pgf@arc@temp\relax%
-          \pgf@arc%
-        }
-        \advance\pgf@arc@local@angle@a by\pgf@arc@temp\relax%
-      \else
-        {%
-          \pgf@arc@local@angle@b=\pgf@arc@local@angle@a\relax%
-          \advance\pgf@arc@local@angle@b by-\pgf@arc@temp\relax%
-          \pgf@arc%
-        }%
-        \advance\pgf@arc@local@angle@a by-\pgf@arc@temp\relax%
-      \fi%
-    \repeat%
-    \pgf@roundcornerifneeded%
-    \pgf@arc%
-  }%
-}
-\dimendef\pgf@arc@local@angle@a=0
-\dimendef\pgf@arc@local@angle@b=1
-\dimendef\pgf@arc@temp=2
-
-\def\pgf@arc@get@radii#1and #2\pgf@arc@stop{%
-  \pgfmathparse{#1}\let\pgf@arc@radius@a=\pgfmathresult%
-  \pgfmathparse{#2}\let\pgf@arc@radius@b=\pgfmathresult%
-}
-
-
-\def\pgf@arc{%
-  {%
-  \pgfutil@tempdima=\pgf@arc@radius@a pt%
-  \pgfutil@tempdimb=\pgf@arc@radius@b pt%
-  %
-  \pgf@xa=\pgf@arc@local@angle@a\relax%
-  \pgf@xb=\pgf@arc@local@angle@b\relax%
-  \advance\pgf@xb by-\pgf@xa\relax%
-  \ifdim\pgf@xb<0pt\relax%
-    \pgf@xb=-\pgf@xb\relax%
-  \fi%
-  \ifdim\pgf@xb=90.0pt%
-    \def\pgfmathresult{0.55228475}%
-  \else%
-    \pgfmathparse{1.333333333*tan(.25*\pgf@sys@tonumber{\pgf@xb})}% many thanks to Ken Starks
-  \fi%
-  \pgfutil@tempdima=\pgfmathresult\pgfutil@tempdima%
-  \pgfutil@tempdimb=\pgfmathresult\pgfutil@tempdimb%
-  %.. controls +(\pgf@xa+90:\pgfutil@tempdima) and +(\pgf@xb-90:\pgfutil@tempdima) .. +(-(#1:#3)+(#2:#3))%
-  % store first support vector in xa/ya:
-  \pgf@xa=\pgf@arc@local@angle@a\relax%
-  \ifdim\pgf@arc@local@angle@b>\pgf@arc@local@angle@a\relax%
-    \advance\pgf@xa by 90pt\relax%
-  \else%
-    \advance\pgf@xa by -90pt\relax%
-  \fi%
-  \edef\pgf@arc@angle{\pgf@sys@tonumber{\pgf@xa}}%
-  \pgfpointtransformed{\pgfpointpolar{\pgf@arc@angle}{\pgfutil@tempdima and \pgfutil@tempdimb}}%
-  \advance\pgf@x by-\pgf@pt@x%
-  \advance\pgf@y by-\pgf@pt@y%
-  \pgf@xa=\pgf@path@lastx%
-  \pgf@ya=\pgf@path@lasty%
-  \advance\pgf@xa by \pgf@x%
-  \advance\pgf@ya by \pgf@y%
-  % store target in xb/yb:
-  \pgfpointtransformed{\pgfpointpolar{\pgf@sys@tonumber{\pgf@arc@local@angle@a}}{\pgf@arc@radius@a pt and \pgf@arc@radius@b pt}}%
-  \pgf@xb=\pgf@path@lastx%
-  \pgf@yb=\pgf@path@lasty%
-  \advance\pgf@xb by -\pgf@x%
-  \advance\pgf@yb by -\pgf@y%
-  \pgfpointtransformed{\pgfpointpolar{\pgf@sys@tonumber{\pgf@arc@local@angle@b}}{\pgf@arc@radius@a pt and \pgf@arc@radius@b pt}}%
-  \advance\pgf@xb by \pgf@x%
-  \advance\pgf@yb by \pgf@y%
-  % store second support xc/yc:
-  \ifdim\pgf@arc@local@angle@b>\pgf@arc@local@angle@a\relax%
-    \advance\pgf@arc@local@angle@b by -90pt\relax%
-  \else%
-    \advance\pgf@arc@local@angle@b by 90pt\relax%
-  \fi%
-  \pgfpointtransformed{\pgfpointpolar{\pgf@sys@tonumber{\pgf@arc@local@angle@b}}{\pgfutil@tempdima and \pgfutil@tempdimb}}%
-  \advance\pgf@x by-\pgf@pt@x%
-  \advance\pgf@y by-\pgf@pt@y%
-  \pgf@xc=\pgf@xb\relax%
-  \pgf@yc=\pgf@yb\relax%
-  \advance \pgf@xc by \pgf@x\relax%
-  \advance \pgf@yc by \pgf@y\relax%
-  \pgf@nlt@curveto{\pgf@xa}{\pgf@ya}{\pgf@xc}{\pgf@yc}{\pgf@xb}{\pgf@yb}%
-  \global\pgf@path@lastx=\pgf@xb%
-  \global\pgf@path@lasty=\pgf@yb%
-  }%
-}
-
-
-% Append an arc to the current point, where the arc is on an ellipse
-% given by two axis vectors.
-%
-% #1 = angle of first point
-% #2 = angle of second point
-% #3 = first axis
-% #4 = second axis
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfxy(0,0)}
-% \pgfpatharcaxes{0}{90}{\pgfpointxy{2}{0}}{\pgfpointxy{0}{2}}
-% \pgfstroke
-
-\def\pgfpatharcaxes#1#2#3#4{%
-  {%
-    \pgftransformtriangle{\pgfpointorigin}{#3}{#4}%
-    \pgfpatharc{#1}{#2}{1pt}%
-  }%
-}
-
-
-
-% Append an arc to the current point that ends at a given position.
-%
-% #1 = x-radius
-% #2 = y-radius
-% #3 = x-axis-rotation (in degrees)
-% #4 = large-arc-sweep-flag (0 or 1)
-% #5 = sweep-flag (0 or 1)
-% #6 = target point
-%
-% Description:
-%
-% This command implements an arc drawing where a given target
-% coordinate (#6) is given and the task is to draw an arc of an
-% ellipse with the given radii. The center point of the ellipse is not
-% give, but computed automatically.
-%
-% This kind of "endpoint parameterization" of an arc is exactly the
-% same as the one specified by the SVG-specification for the "A" and
-% "a" path commands. Please see the SVG-specification for details.
-%
-% Note that the problem is internally converted to drawing an arc
-% using \pgfpatharc. This means that there may be a heavy loss of
-% accuracy.
-%
-% Example:
-%
-% \pgfpathmoveto{\pgfpoint{1cm}{1cm}}
-% \pgfpatharcto{1cm}{1cm}{0}{0}{0}{\pgfpoint{0cm}{2cm}}
-
-\def\pgfpatharcto#1#2#3#4#5#6{%
-  {%
-    % The following code is based on the transformation described in svg
-    % 1.1 specification Section F.6.5
-    %
-    % Step 1: store the simple parameters (xa=x1 since TeX does not
-    % allow numbers in names)
-    %
-    \pgfmathsetmacro\pgf@arcto@rx{abs(#1)}%
-    \pgfmathsetmacro\pgf@arcto@ry{abs(#2)}%
-    \ifdim\pgf@arcto@rx pt=0pt% special rule: zero radius=straight line
-      \gdef\pgf@marshal{\pgfpathlineto{#6}}%
-    \else
-    \ifdim\pgf@arcto@ry pt=0pt% special rule: zero radius=straight line
-      \gdef\pgf@marshal{\pgfpathlineto{#6}}%
-    \else
-    \pgfmathsetmacro\pgf@arcto@phi{#3}%
-    \pgfmathsetmacro\pgf@arcto@fA{#4}%
-    \ifdim\pgf@arcto@fA pt=0pt
-    \else
-      \pgfmathsetmacro\pgf@arcto@fA{1.0} % Special rule: every non-zero value is 1.
-    \fi
-    \pgfmathsetmacro\pgf@arcto@fS{#5}%
-    \ifdim\pgf@arcto@fS pt=0pt
-    \else
-      \pgfmathsetmacro\pgf@arcto@fS{1.0} % Special rule: every non-zero value is 1.
-    \fi
-    \pgf@process{#6}
-    \edef\pgf@arcto@xb{\the\pgf@x}%
-    \edef\pgf@arcto@yb{\the\pgf@y}%
-    %
-    % Step 2: x1,y1 is more complicated to compute: It is given by lastx
-    % and lasty, but these are transformed coordinates, we need the
-    % untransformed ones. So, we inverse the transformation (arghh...)
-    %
-    \pgftransforminvert%
-    \pgf@process{\pgfpointtransformed{\pgfqpoint{\pgf@path@lastx}{\pgf@path@lasty}}}
-    \edef\pgf@arcto@xa{\the\pgf@x}
-    \edef\pgf@arcto@ya{\the\pgf@y}
-    \edef\pgf@temp@a{\pgf@arcto@xa,\pgf@arcto@ya}
-    \edef\pgf@temp@b{\pgf@arcto@xb,\pgf@arcto@yb}
-    \ifx\pgf@temp@a\pgf@temp@b% special rule: skip!
-      \global\let\pgf@marshal\pgfutil@empty
-    \else
-    %
-    % Ok, now we got all the parameters setup. Now comes the
-    % computation...
-    %
-    %
-    % Step 3: Start with a new coordinate system and rotate everything
-    % by the negated phi.
-    %
-    \pgftransformreset
-    \pgftransformrotate{-\pgf@arcto@phi}
-    % Ok, using \pgfpointtransformed we now get transformed points...
-    %
-    % Step 4: Compute x1' and y1' (xaprime and yaprime)
-    %
-    \pgf@process{
-      \pgfpointtransformed{\pgfpointscale{.5}{\pgfpointdiff
-          {\pgfqpoint{\pgf@arcto@xb}{\pgf@arcto@yb}}
-          {\pgfqpoint{\pgf@arcto@xa}{\pgf@arcto@ya}}
-        }
-      }
-    }
-    \edef\pgf@arcto@xaprime{\pgf@sys@tonumber\pgf@x}
-    \edef\pgf@arcto@yaprime{\pgf@sys@tonumber\pgf@y}
-    %
-    % Compute Lambda
-    %
-    \pgfmathsetmacro\pgf@arcto@frac@x{\pgf@arcto@xaprime/\pgf@arcto@rx}
-    \pgfmathsetmacro\pgf@arcto@frac@y{\pgf@arcto@yaprime/\pgf@arcto@ry}
-    \pgfmathsetmacro\pgf@arcto@lambda{
-      \pgf@arcto@frac@x*\pgf@arcto@frac@x+\pgf@arcto@frac@y*\pgf@arcto@frac@y
-    }
-    \ifdim\pgf@arcto@lambda pt>1pt%
-      \pgfmathsetmacro\pgf@arcto@sqrt@lambda{sqrt(\pgf@arcto@lambda)}
-      \pgfmathsetmacro\pgf@arcto@rx{\pgf@arcto@sqrt@lambda*\pgf@arcto@rx}
-      \pgfmathsetmacro\pgf@arcto@ry{\pgf@arcto@sqrt@lambda*\pgf@arcto@ry}
-    \fi
-    %
-    % Do some scaling
-    %
-    \pgfmathsetmacro\pgf@arcto@xaprime@abs{abs(\pgf@arcto@xaprime)}
-    \pgfmathsetmacro\pgf@arcto@yaprime@abs{abs(\pgf@arcto@yaprime)}
-    \pgfmathmax@{\pgf@arcto@rx,\pgf@arcto@ry,\pgf@arcto@xaprime@abs,\pgf@arcto@yaprime@abs}
-    \pgfmathsetmacro\pgf@arcto@scaling{20/\pgfmathresult}
-    \pgfmathsetmacro\pgf@arcto@rx@scaled{\pgf@arcto@scaling*\pgf@arcto@rx}
-    \pgfmathsetmacro\pgf@arcto@ry@scaled{\pgf@arcto@scaling*\pgf@arcto@ry}
-    \pgfmathsetmacro\pgf@arcto@xaprime@scaled{\pgf@arcto@scaling*\pgf@arcto@xaprime}
-    \pgfmathsetmacro\pgf@arcto@yaprime@scaled{\pgf@arcto@scaling*\pgf@arcto@yaprime}
-    %
-    % Step 5: Now comes the messy computation of c1' and c2'.
-    %
-    \ifdim\pgf@arcto@rx pt>\pgf@arcto@ry pt%
-      \pgfmathsetmacro\pgf@arcto@rx@over@ry{\pgf@arcto@rx/\pgf@arcto@ry}
-      \pgfmathsetmacro\pgf@arcto@ry@over@rx{\pgf@arcto@ry/\pgf@arcto@rx}
-      \pgfmathsetmacro\pgf@arcto@temp{\pgf@arcto@ry@over@rx*\pgf@arcto@xaprime@scaled}
-      \pgfmathsetmacro\pgf@arcto@numerator{
-        \pgf@arcto@ry@scaled*\pgf@arcto@ry@scaled-
-        \pgf@arcto@yaprime@scaled*\pgf@arcto@yaprime@scaled-
-        \pgf@arcto@temp*\pgf@arcto@temp
-      }
-      \pgfmathsetmacro\pgf@arcto@denominator{
-        \pgf@arcto@yaprime@scaled*\pgf@arcto@yaprime@scaled+
-        \pgf@arcto@temp*\pgf@arcto@temp
-      }
-    \else
-      \pgfmathsetmacro\pgf@arcto@rx@over@ry{\pgf@arcto@rx/\pgf@arcto@ry}
-      \pgfmathsetmacro\pgf@arcto@ry@over@rx{\pgf@arcto@ry/\pgf@arcto@rx}
-      \pgfmathsetmacro\pgf@arcto@temp{\pgf@arcto@rx@over@ry*\pgf@arcto@yaprime@scaled}
-      \pgfmathsetmacro\pgf@arcto@numerator{
-        \pgf@arcto@rx@scaled*\pgf@arcto@rx@scaled-
-        \pgf@arcto@xaprime@scaled*\pgf@arcto@xaprime@scaled-
-        \pgf@arcto@temp*\pgf@arcto@temp
-      }
-      \pgfmathsetmacro\pgf@arcto@denominator{
-        \pgf@arcto@xaprime@scaled*\pgf@arcto@xaprime@scaled+
-        \pgf@arcto@temp*\pgf@arcto@temp
-      }
-    \fi
-    \pgfmathsetmacro\pgf@arcto@frac{
-      \pgf@arcto@numerator/\pgf@arcto@denominator
-    }
-    \ifdim\pgf@arcto@frac pt<0pt
-      \pgfmathsetmacro\pgf@arcto@factor{0}
-    \else
-      \pgfmathsetmacro\pgf@arcto@factor{sqrt(\pgf@arcto@frac)}
-    \fi
-    \ifx\pgf@arcto@fA\pgf@arcto@fS
-      \pgfmathsetmacro\pgf@arcto@factor{-\pgf@arcto@factor}
-    \fi
-    \pgfmathsetmacro\pgf@arcto@cxprime{
-      \pgf@arcto@factor*\pgf@arcto@rx@over@ry*\pgf@arcto@yaprime
-    }
-    \pgfmathsetmacro\pgf@arcto@cyprime{
-      -\pgf@arcto@factor*\pgf@arcto@ry@over@rx*\pgf@arcto@xaprime
-    }
-    %
-    % Step 6: Ok, now compute cx,cy
-    %
-    \pgftransformreset
-    \pgftransformrotate{\pgf@arcto@phi}
-    \pgf@process{
-      \pgfpointtransformed{\pgfqpoint{\pgf@arcto@cxprime pt}{\pgf@arcto@cyprime pt}}
-    }
-    \edef\pgf@arcto@temp{\noexpand\pgfqpoint{\the\pgf@x}{\the\pgf@y}}
-    \pgf@process{\pgfpointadd{\pgf@arcto@temp}{
-        \pgfpointscale{.5}{
-          \pgfpointadd
-          {\pgfqpoint{\pgf@arcto@xa}{\pgf@arcto@ya}}
-          {\pgfqpoint{\pgf@arcto@xb}{\pgf@arcto@yb}}        }
-      }
-    }
-    \edef\pgf@arcto@cx{\the\pgf@x}
-    \edef\pgf@arcto@cy{\the\pgf@y}
-    %
-    % Step 7: Compute start angle:
-    %
-    \pgfmathsetmacro\pgf@arcto@vec@x{(\pgf@arcto@xaprime-\pgf@arcto@cxprime)/\pgf@arcto@rx}
-    \pgfmathsetmacro\pgf@arcto@vec@y{(\pgf@arcto@yaprime-\pgf@arcto@cyprime)/\pgf@arcto@ry}
-    \pgfmathsetmacro\pgf@arcto@denominator{veclen(\pgf@arcto@vec@x,\pgf@arcto@vec@y)}
-    \pgfmathsetmacro\pgf@arcto@frac{\pgf@arcto@vec@x/\pgf@arcto@denominator}
-    \pgfmathsetmacro\pgf@arcto@theta@start{acos(\pgf@arcto@frac)}
-    \ifdim\pgf@arcto@vec@y pt<0pt
-      \pgfmathsetmacro\pgf@arcto@theta@start{-\pgf@arcto@theta@start}
-    \fi
-    %
-    % Step 8: Compute end angle:
-    %
-    \pgfmathsetmacro\pgf@arcto@vec@x{(-\pgf@arcto@xaprime-\pgf@arcto@cxprime)/\pgf@arcto@rx}
-    \pgfmathsetmacro\pgf@arcto@vec@y{(-\pgf@arcto@yaprime-\pgf@arcto@cyprime)/\pgf@arcto@ry}
-    \pgfmathsetmacro\pgf@arcto@denominator{veclen(\pgf@arcto@vec@x,\pgf@arcto@vec@y)}
-    \pgfmathsetmacro\pgf@arcto@frac{\pgf@arcto@vec@x/\pgf@arcto@denominator}
-    \pgfmathsetmacro\pgf@arcto@theta@end{acos(\pgf@arcto@frac)}
-    \ifdim\pgf@arcto@vec@y pt<0pt
-      \pgfmathsetmacro\pgf@arcto@theta@end{-\pgf@arcto@theta@end}
-    \fi
-    \pgfmathsetmacro\pgf@arcto@delta@theta{abs(\pgf@arcto@theta@start-\pgf@arcto@theta@end)}
-    \ifdim\pgf@arcto@fA pt=0pt%
-      \ifdim\pgf@arcto@delta@theta pt>180pt%
-        % Ok, we need to adjust the angle!
-        \ifdim\pgf@arcto@theta@end pt>\pgf@arcto@theta@start pt
-          \pgfmathsetmacro\pgf@arcto@theta@end{\pgf@arcto@theta@end-360}
-        \else
-          \pgfmathsetmacro\pgf@arcto@theta@end{\pgf@arcto@theta@end+360}
-        \fi
-      \fi
-    \else
-      \ifdim\pgf@arcto@delta@theta pt<180pt%
-        % Ok, we need to adjust the angle!
-        \ifdim\pgf@arcto@theta@end pt>\pgf@arcto@theta@start pt
-          \pgfmathsetmacro\pgf@arcto@theta@end{\pgf@arcto@theta@end-360}
-        \else
-          \pgfmathsetmacro\pgf@arcto@theta@end{\pgf@arcto@theta@end+360}
-        \fi
-      \fi
-    \fi
-    \xdef\pgf@marshal{\noexpand
-      \pgfpatharcaxes{\pgf@arcto@theta@start}{\pgf@arcto@theta@end}
-      {\noexpand\pgfpointpolar{\pgf@arcto@phi}{\pgf@arcto@rx}}
-      {\noexpand\pgfpointpolar{\pgf@arcto@phi+90}{\pgf@arcto@ry}}
-    }
-    \fi\fi\fi
-  }
-  \pgf@marshal
-}
-
-
-
-% the quality of arc approximation by means of Bezier splines is
-% controlled by a mesh width.
-%
-% The mesh width is provided in (full!) degrees. The smaller the mesh
-% width, the more precise the arc approximation.
-%
-% Use an empty value to disable spline approximation (uses a single
-% cubic polynomial for the complete arc).
-%
-% The value must be an integer!
-\def\pgfpatharctomaxstepsize{45}
-
-% A specialized arc operation for an arc on an (axis--parallel) ellipse.
-%
-% In contrast to \pgfpatharc, it explicitly interpolates start- and end points.
-%
-% In contrast to \pgfpatharcto, this routine is numerically stable and
-% quite fast since it relies on a lot of precomputed information.
-%
-% #1 center of ellipse
-% #2 angle of last path position inside of the ellipse
-% #3 end angle
-% #4 end point (a \pgfpoint)
-% #5 xradius
-% #6 yradius
-% #7 the ratio xradius/yradius of the ellipse
-% #8 the ratio yradius/xradius of the ellipse
-% Example:
-%    \def\cx{1cm}% center x
-%    \def\cy{1cm}% center y
-%    \def\startangle{0}%
-%    \def\endangle{45}%
-%    \def\a{5cm}% xradius
-%    \def\b{10cm}% yradius
-%    \pgfmathparse{\a/\b}\let\abratio=\pgfmathresult
-%    \pgfmathparse{\b/\a}\let\baratio=\pgfmathresult
-%
-% \pgfpathmoveto{\pgfpoint{\cx+\a*cos(\startangle)}{\cy+\b*sin(\startangle)}}%
-% \pgfpatharctoprecomputed
-%    {\pgfpoint{\cx}{\cy}}
-%    {\startangle}
-%    {\endangle}
-%    {\pgfpoint{\cx+\a*cos(\endangle)}{\cy+\b*sin(\endangle)}}%
-%    {\a}
-%    {\b}
-%    {\abratio}
-%    {\baratio}
-%
-\def\pgfpatharctoprecomputed#1#2#3#4#5#6#7#8{%
-    \begingroup
-    % Implementation idea:
-    %
-    % let
-    %   m = center (#1)
-    %   \gamma_0 = start angle
-    %   \gamma_1 = end angle
-    %   a = x radius
-    %   b = y radius
-    %
-    % an axis parallel ellipse is parameterized by
-    % C(\gamma) = m + ( a cos(\gamma), b sin(\gamma) ), \gamma in [0,360].
-    %
-    % Now, consider the segment \gamma(t),
-    %   \gamma:[0,1] -> [\gamma_0,\gamma_1],
-    %            t   ->  \gamma_0 + t(\gamma_1 - \gamma_0)
-    % and
-    %   C(\gamma(t)) which is defined on [0,1].
-    %
-    % I'd like to approximate the arc by one or more cubic bezier
-    % splines which interpolate through the last and first provided
-    % points.
-    %
-    % In general, a Bezier spline C:[0,1] -> \R of order n fulfills
-    % C'(0) = n ( P_1 - P_0 ),
-    % C'(1) = n ( P_n - P_{n-1} ).
-    % For n=3 and given P_0 and P_3, I can directly compute P_1 and P_2 once I know
-    % the derivatives at t=0 and t=1.
-    %
-    % The derivatives in our case are
-    %   ( C \circ \gamma )'(t) = C'[\gamma(t)] * \gamma'(t)
-    %       = ( -a pi/180 sin(\gamma(t)),  b pi/180 cos(\gamma(t)) ) * (\gamma_1 - \gamma_0).
-    % The pi/180 comes into play since we are working with degrees.
-    %
-    % Expression (C\circ\gamma)'(0) using P_0 and (C \circ \gamma)'(1)
-    % using P_3 yields the expressions
-    %   (C \circ \gamma)'(0) =
-    %       pi/180 * (\gamma_1 - \gamma_0)* [ - a/b(P_0^y - my), b/a (P_0^x - mx) ]
-    %   (C \circ \gamma)'(1) =
-    %       pi/180 * (\gamma_1 - \gamma_0)* [ - a/b(P_3^y - my), b/a (P_3^x - mx) ]
-    %
-    % defining
-    %  scaleA = a/b * pi / (3*180) * (\gamma_1 - \gamma_0)
-    % and
-    %  scaleB = b/a * pi / (3*180) * (\gamma_1 - \gamma_0)
-    % yields the direct expressions for the intermediate bezier
-    % control points
-    %
-    % P_1 = [
-    %   P_0^x - scaleA* ( P_0^y -my),
-    %   P_0^y + scaleB* ( P_0^x -mx) ]
-    % and
-    % P_2 = [
-    %   P_3^x + scaleA* ( P_3^y -my),
-    %   P_3^y - scaleB* ( P_3^x -mx) ].
-    %
-    % This works fast, with few operations, if
-    % - a/b and b/a are known in advance
-    % - P_0 and P_3 are known in advance
-    % - \gamma_0 and \gamma_1 are known.
-    %
-    % It is also reliable if (\gamma_1 - \gamma_0) is small
-    %
-    \pgf@process{#1}%
-    \edef\pgfpath@center@x{\the\pgf@x}%
-    \edef\pgfpath@center@y{\the\pgf@y}%
-    \def\pgfpath@completearcend{#4}%
-    % compute scale (#3-#2) * pi/(3*180) = (#3 - #2) * pi/27 * 1/20
-    % splitting pi/(3*180) into two scales has higher TeX accuracy
-    \pgf@xa=#2pt
-    \pgf@xb=#3pt
-    \edef\pgfpath@startangle{#2pt}%
-    \edef\pgfpath@endangle{\pgf@sys@tonumber\pgf@xb}%
-    %
-    \pgf@ya=\pgf@xb
-    \advance\pgf@ya by-\pgf@xa
-    %
-    \ifx\pgfpatharctomaxstepsize\pgfutil@empty
-        \def\pgfpath@N{1}%
-        \pgf@xc=\pgf@ya
-    \else
-        \pgf@xc=\pgf@ya% compute N = floor((gamma_1 - gamma_0) / max) +1
-        \ifdim\pgf@xc<0pt
-            \multiply\pgf@xc by-1
-        \fi
-        \divide\pgf@xc by\pgfpatharctomaxstepsize\relax
-        \afterassignment\pgfutil@gobble@until@relax
-        \c@pgf@counta=\the\pgf@xc\relax
-        \advance\c@pgf@counta by1
-        \edef\pgfpath@N{\the\c@pgf@counta}%
-        %
-        \pgf@xc=\pgf@ya
-        \divide\pgf@xc by\c@pgf@counta
-    \fi
-    %
-    \edef\pgfpath@h{\pgf@sys@tonumber\pgf@xc}%
-    %
-%\message{pgfpathellipse: using N =\pgfpath@N\space spline points y0 = \pgfpath@startangle, y0+i*h, yN=\pgfpath@endangle, i=1,...,(\pgfpath@N-1), with h=\pgfpath@h\space mesh width (total arc angle \pgf@sys@tonumber\pgf@ya).}%
-    %
-    %
-    \pgf@xc=0.116355283466289\pgf@xc % pi/27
-    \divide\pgf@xc by20
-    \pgf@xa=#7\pgf@xc
-    \edef\pgfpath@scale@A{\pgf@sys@tonumber\pgf@xa}%
-    \pgf@xa=#8\pgf@xc
-    \edef\pgfpath@scale@B{\pgf@sys@tonumber\pgf@xa}%
-    %
-    % compute intermediate spline segments for
-    %  i = 1,...,N-1
-    % this is a no-op for N=1.
-    \c@pgf@countd=1
-    \pgfutil@loop
-    \ifnum\c@pgf@countd<\pgfpath@N\relax
-        %
-        \pgf@xa=\pgfpath@startangle % compute \pgf@xa = y_0 + i*h
-        \pgf@xb=\pgfpath@h pt
-        \multiply\pgf@xb by\c@pgf@countd
-        \advance\pgf@xa by\pgf@xb
-        \edef\pgfpath@angle@i{\pgf@sys@tonumber\pgf@xa}%
-%\message{angle \the\c@pgf@countd: \pgfpath@angle@i...}%
-        %
-        \pgfpatharcofellipse@{%
-            \pgfpoint
-                {\pgfpath@center@x + #5*cos(\pgfpath@angle@i)}
-                {\pgfpath@center@y + #6*sin(\pgfpath@angle@i)}%
-        }%
-        %
-        \advance\c@pgf@countd by1
-    \pgfutil@repeat
-    %
-    % compute final spline segment. It only differs insofar as the
-    % final point is already known explicitly and should be
-    % interpolated without additional math error.
-%\message{angle \pgfpath@N: \pgfpath@endangle...}%
-    \pgfpatharcofellipse@{\pgfpath@completearcend}%
-    \endgroup
-}%
-\def\pgfpatharcofellipse@#1{%
-    \begingroup
-    \pgf@process{#1}%
-    \edef\pgfpath@endpt{\global\pgf@x=\the\pgf@x\space\global\pgf@y=\the\pgf@y\space}%
-    %
-    \pgfpathcurveto{
-        \begingroup
-        \global\pgf@x=\pgf@path@lastx
-        \global\pgf@y=\pgf@path@lasty
-        \pgf@xa=\pgf@x \advance\pgf@xa by-\pgfpath@center@x
-        \pgf@ya=\pgf@y \advance\pgf@ya by-\pgfpath@center@y
-        \global\advance\pgf@x by-\pgfpath@scale@A\pgf@ya
-        \global\advance\pgf@y by \pgfpath@scale@B\pgf@xa
-        \endgroup
-    }{%
-        \begingroup
-        \pgfpath@endpt
-        \pgf@xa=\pgf@x \advance\pgf@xa by-\pgfpath@center@x
-        \pgf@ya=\pgf@y \advance\pgf@ya by-\pgfpath@center@y
-        \global\advance\pgf@x by \pgfpath@scale@A\pgf@ya
-        \global\advance\pgf@y by-\pgfpath@scale@B\pgf@xa
-        \endgroup
-    }{%
-        \pgfpath@endpt
-    }%
-    \endgroup
-}
-
-
-
-
-
-
-
-
-
-% Append  an ellipse to the current path.
-%
-% #1 = center
-% #2 = first axis
-% #3 = second axis
-%
-% Example:
-%
-% % Add a circle of radius 3cm around the origin
-% \pgfpathellipse{\pgforigin}{\pgfxy(2,0)}{\pgfxy(0,1)}
-%
-% % Draw a non-filled circle of radius 1cm around the point (1,1)
-% \pgfpathellipse{\pgfxy(1,1)}{\pgfxy(1,1)}{\pgfxy(-2,2)}
-% \pgfstroke
-
-\def\pgfpathellipse#1#2#3{%
-  \pgfpointtransformed{#1}% store center in xc/yc
-  \pgf@xc=\pgf@x%
-  \pgf@yc=\pgf@y%
-  \pgfpointtransformed{#2}%
-  \pgf@xa=\pgf@x% store first axis in xa/ya
-  \pgf@ya=\pgf@y%
-  \advance\pgf@xa by-\pgf@pt@x%
-  \advance\pgf@ya by-\pgf@pt@y%
-  \pgfpointtransformed{#3}%
-  \pgf@xb=\pgf@x% store second axis in xb/yb
-  \pgf@yb=\pgf@y%
-  \advance\pgf@xb by-\pgf@pt@x%
-  \advance\pgf@yb by-\pgf@pt@y%
-  {%
-    \advance\pgf@xa by\pgf@xc%
-    \advance\pgf@ya by\pgf@yc%
-    \pgf@nlt@moveto{\pgf@xa}{\pgf@ya}%
-  }%
-  \pgf@x=0.55228475\pgf@xb% first arc
-  \pgf@y=0.55228475\pgf@yb%
-  \advance\pgf@x by\pgf@xa%
-  \advance\pgf@y by\pgf@ya%
-  \advance\pgf@x by\pgf@xc%
-  \advance\pgf@y by\pgf@yc%
-  \edef\pgf@temp{\pgf@xc\the\pgf@x\pgf@yc\the\pgf@y}%
-  \pgf@x=0.55228475\pgf@xa%
-  \pgf@y=0.55228475\pgf@ya%
-  \advance\pgf@x by\pgf@xb%
-  \advance\pgf@y by\pgf@yb%
-  {%
-    \advance\pgf@x by\pgf@xc%
-    \advance\pgf@y by\pgf@yc%
-    \advance\pgf@xb by\pgf@xc%
-    \advance\pgf@yb by\pgf@yc%
-    \pgf@temp%
-    \pgf@nlt@curveto{\pgf@xc}{\pgf@yc}{\pgf@x}{\pgf@y}{\pgf@xb}{\pgf@yb}%
-  }%
-  \pgf@xa=-\pgf@xa% flip first axis
-  \pgf@ya=-\pgf@ya%
-  \pgf@x=0.55228475\pgf@xa% second arc
-  \pgf@y=0.55228475\pgf@ya%
-  \advance\pgf@x by\pgf@xb%
-  \advance\pgf@y by\pgf@yb%
-  \advance\pgf@x by\pgf@xc%
-  \advance\pgf@y by\pgf@yc%
-  \edef\pgf@temp{\pgf@xc\the\pgf@x\pgf@yc\the\pgf@y}%
-  \pgf@x=0.55228475\pgf@xb%
-  \pgf@y=0.55228475\pgf@yb%
-  \advance\pgf@x by\pgf@xa%
-  \advance\pgf@y by\pgf@ya%
-  {%
-    \advance\pgf@x by\pgf@xc%
-    \advance\pgf@y by\pgf@yc%
-    \advance\pgf@xa by\pgf@xc%
-    \advance\pgf@ya by\pgf@yc%
-    \pgf@temp%
-    \pgf@nlt@curveto{\pgf@xc}{\pgf@yc}{\pgf@x}{\pgf@y}{\pgf@xa}{\pgf@ya}%
-  }%
-  \pgf@xb=-\pgf@xb% flip second axis
-  \pgf@yb=-\pgf@yb%
-  \pgf@x=0.55228475\pgf@xb% third arc
-  \pgf@y=0.55228475\pgf@yb%
-  \advance\pgf@x by\pgf@xa%
-  \advance\pgf@y by\pgf@ya%
-  \advance\pgf@x by\pgf@xc%
-  \advance\pgf@y by\pgf@yc%
-  \edef\pgf@temp{\pgf@xc\the\pgf@x\pgf@yc\the\pgf@y}%
-  \pgf@x=0.55228475\pgf@xa%
-  \pgf@y=0.55228475\pgf@ya%
-  \advance\pgf@x by\pgf@xb%
-  \advance\pgf@y by\pgf@yb%
-  {%
-    \advance\pgf@x by\pgf@xc%
-    \advance\pgf@y by\pgf@yc%
-    \advance\pgf@xb by\pgf@xc%
-    \advance\pgf@yb by\pgf@yc%
-    \pgf@temp%
-    \pgf@nlt@curveto{\pgf@xc}{\pgf@yc}{\pgf@x}{\pgf@y}{\pgf@xb}{\pgf@yb}%
-  }%
-  \pgf@xa=-\pgf@xa% flip first axis once more
-  \pgf@ya=-\pgf@ya%
-  \pgf@x=0.55228475\pgf@xa% fourth arc
-  \pgf@y=0.55228475\pgf@ya%
-  \advance\pgf@x by\pgf@xb%
-  \advance\pgf@y by\pgf@yb%
-  \advance\pgf@x by\pgf@xc%
-  \advance\pgf@y by\pgf@yc%
-  \edef\pgf@temp{\pgf@xc\the\pgf@x\pgf@yc\the\pgf@y}%
-  \pgf@x=0.55228475\pgf@xb%
-  \pgf@y=0.55228475\pgf@yb%
-  \advance\pgf@x by\pgf@xa%
-  \advance\pgf@y by\pgf@ya%
-  {%
-    \advance\pgf@x by\pgf@xc%
-    \advance\pgf@y by\pgf@yc%
-    \advance\pgf@xa by\pgf@xc%
-    \advance\pgf@ya by\pgf@yc%
-    \pgf@temp%
-    \pgf@nlt@curveto{\pgf@xc}{\pgf@yc}{\pgf@x}{\pgf@y}{\pgf@xa}{\pgf@ya}%
-  }%
-  \pgf@nlt@closepath%
-  \pgf@nlt@moveto{\pgf@xc}{\pgf@yc}%
-}
-
-
-
-% Append a circle to the current path
-%
-% #1 = center
-% #2 = radius
-%
-% Example:
-%
-% % Append a circle of radius 3cm around the point (1,1)
-% \pgfpathcircle{\pgxy(1,1)}{3cm}
-
-\def\pgfpathcircle#1#2{\pgfpathellipse{#1}{\pgfpoint{#2}{0pt}}{\pgfpoint{0pt}{#2}}}
-
-
-
-
-% Append a rectangle to the current path
-%
-% #1 = lower left corner point of rectangle
-% #2 = width and height vector
-%
-% Example:
-%
-% % A rectangle with corners (2,2) and (3,3)
-% \pgfpathrectangle{\pgfpointxy{2}{2}}{\pgfpointxy{1}{1}}
-
-\def\pgfpathrectangle{%
-  \let\pgfrect@next=\pgf@specialrect%
-  \ifpgf@pt@identity%
-    \ifpgf@arccorners%
-    \else%
-      \ifx\pgf@nlt@list\pgfutil@empty%
-        \let\pgfrect@next=\pgf@normalrect%
-      \fi%
-    \fi%
-  \fi%
-  \pgfrect@next%
-}
-
-\def\pgf@normalrect#1#2{%
-  \pgf@process{#2}%
-  \pgf@xa=\pgf@x%
-  \pgf@ya=\pgf@y%
-  \pgfpointtransformed{#1}%
-  \pgfsyssoftpath@rect{\the\pgf@x}{\the\pgf@y}{\the\pgf@xa}{\the\pgf@ya}%
-  \pgf@protocolsizes{\pgf@x}{\pgf@y}%
-  \advance\pgf@x by\pgf@xa\relax%
-  \advance\pgf@y by\pgf@ya\relax%
-  \pgf@protocolsizes{\pgf@x}{\pgf@y}%
-}
-
-\def\pgf@specialrect#1#2{%
-  \pgf@process{#2}%
-  \pgf@xa=\pgf@x%
-  \pgf@ya=\pgf@y%
-  \pgf@process{#1}%
-  \pgf@xb=\pgf@x%
-  \pgf@yb=\pgf@y%
-  \advance\pgf@xa by\pgf@xb%
-  \advance\pgf@ya by\pgf@yb%
-  \pgfpathmoveto{\pgfqpoint{\pgf@xa}{\pgf@ya}}%
-  \pgfpathlineto{\pgfqpoint{\pgf@xb}{\pgf@ya}}%
-  \pgfpathlineto{\pgfqpoint{\pgf@xb}{\pgf@yb}}%
-  \pgfpathlineto{\pgfqpoint{\pgf@xa}{\pgf@yb}}%
-  \pgfpathclose%
-  \pgfpathmoveto{\pgfqpoint{\pgf@xb}{\pgf@yb}}%
-}
-
-% Append a rectangle to the current path
-%
-% #1 = one corner of the rectangle
-% #2 = opposite corner of the rectangle
-%
-% Example:
-%
-% % A rectangle with corners (2,2) and (3,3)
-% \pgfpathrectanglecorners{\pgfpointxy{2}{2}}{\pgfpointxy{3}{3}}
-
-\def\pgfpathrectanglecorners#1#2{%
-  \pgf@process{#2}%
-  \pgf@xc=\pgf@x%
-  \pgf@yc=\pgf@y%
-  \pgf@process{#1}%
-  \advance\pgf@xc by-\pgf@x%
-  \advance\pgf@yc by-\pgf@y%
-  \pgfpathrectangle{#1}{\pgfqpoint{\pgf@xc}{\pgf@yc}}%
-}
-
-
-% Append a grid to the current path.
-%
-% #1 = first corner point of grid
-% #2 = second corner point of grid
-%
-% Options:
-%
-% stepx = x-step dimension (default 1cm)
-% stepy = y-step dimension (default 1cm)
-% step  = dimension vector
-%
-% Example:
-%
-% \pgfsetlinewidth{0.8pt}
-% \pgfgrid{\pgfxy(0,0)}{\pgfxy(3,2)}
-% \pgfsetlinewidth{0.4pt}
-% \pgfgrid[stepx=1cm,stepy=1cm]{\pgfxy(0,0)}{\pgfxy(3,2)}
-
-\pgfkeys{
-  /pgf/stepx/.initial=1cm,
-  /pgf/stepy/.initial=1cm,
-  /pgf/step/.code={\pgf@process{#1}\pgfkeysalso{/pgf/stepx/.expanded=\the\pgf@x,/pgf/stepy/.expanded=\the\pgf@y}},
-  /pgf/step/.value required
-}
-
-\def\pgfpathgrid{\pgfutil@ifnextchar[{\pgf@pathgrid}{\pgf@pathgrid[]}}
-\def\pgf@pathgrid[#1]#2#3{%
-  \pgfset{#1}%
-  \pgfmathsetlength\pgf@xc{\pgfkeysvalueof{/pgf/stepx}}%
-  \pgfmathsetlength\pgf@yc{\pgfkeysvalueof{/pgf/stepy}}%
-  \pgf@process{#3}%
-  \pgf@xb=\pgf@x%
-  \pgf@yb=\pgf@y%
-  \pgf@process{#2}%
-  \pgf@xa=\pgf@x%
-  \pgf@ya=\pgf@y%
-  % Swap coordinates if one of them is smaller than the other:
-  \ifdim\pgf@xa>\pgf@xb%
-    \pgf@x=\pgf@xb%
-    \pgf@xb=\pgf@xa%
-    \pgf@xa=\pgf@x%
-  \fi%
-  \ifdim\pgf@ya>\pgf@yb%
-    \pgf@y=\pgf@yb%
-    \pgf@yb=\pgf@ya%
-    \pgf@ya=\pgf@y%
-  \fi%
-  \ifdim \pgf@yc > .01pt\relax% if to draw horizontal lines
-    \c@pgf@counta=\pgf@ya\relax%
-    \c@pgf@countb=\pgf@yc\relax%
-    \divide\c@pgf@counta by\c@pgf@countb\relax%
-    \pgfutil@tempdima=\c@pgf@counta\pgf@yc\relax%
-    \ifdim\pgfutil@tempdima<\pgf@ya%
-      \advance\pgfutil@tempdima by\pgf@yc%
-    \fi%
-    \pgfutil@tempdimb\pgf@x
-    \pgfutil@loop% horizontal lines
-      {%
-        \pgf@xa=\pgfutil@tempdimb%
-        \pgf@ya=\pgfutil@tempdima%
-        \pgf@pos@transform{\pgf@xa}{\pgf@ya}
-        \pgf@nlt@moveto{\pgf@xa}{\pgf@ya}%
-        \pgf@xa=\pgf@xb%
-        \pgf@ya=\pgfutil@tempdima%
-        \pgf@pos@transform{\pgf@xa}{\pgf@ya}
-        \pgf@nlt@lineto{\pgf@xa}{\pgf@ya}%
-      }%
-    \advance\pgfutil@tempdima by\pgf@yc%
-    \ifdim\pgfutil@tempdima<\pgf@yb%
-    \pgfutil@repeat%
-    \advance\pgfutil@tempdima by-0.01pt\relax%
-    \ifdim\pgfutil@tempdima<\pgf@yb%
-      {%
-        \pgf@xa=\pgfutil@tempdimb%
-        \pgf@ya=\pgfutil@tempdima%
-        \pgf@pos@transform{\pgf@xa}{\pgf@ya}
-        \pgf@nlt@moveto{\pgf@xa}{\pgf@ya}%
-        \pgf@xa=\pgf@xb%
-        \pgf@ya=\pgfutil@tempdima%
-        \pgf@pos@transform{\pgf@xa}{\pgf@ya}
-        \pgf@nlt@lineto{\pgf@xa}{\pgf@ya}%
-      }%
-    \fi%
-  \fi%
-  \ifdim \pgf@xc > .01pt\relax% if to draw vertical lines
-    \c@pgf@counta=\pgf@xa\relax%
-    \c@pgf@countb=\pgf@xc\relax%
-    \divide\c@pgf@counta by\c@pgf@countb\relax%
-    \pgfutil@tempdimb=\c@pgf@counta\pgf@xc\relax%
-    \ifdim\pgfutil@tempdimb<\pgf@xa%
-      \advance\pgfutil@tempdimb by\pgf@xc%
-    \fi%
-    \pgfutil@loop% vertical lines
-      {%
-        \pgf@xc=\pgfutil@tempdimb%
-        \pgf@yc=\pgf@ya%
-        \pgf@pos@transform{\pgf@xc}{\pgf@yc}
-        \pgf@nlt@moveto{\pgf@xc}{\pgf@yc}%
-        \pgf@xc=\pgfutil@tempdimb%
-        \pgf@yc=\pgf@yb%
-        \pgf@pos@transform{\pgf@xc}{\pgf@yc}
-        \pgf@nlt@lineto{\pgf@xc}{\pgf@yc}%
-      }%
-      \advance\pgfutil@tempdimb by\pgf@xc%
-    \ifdim\pgfutil@tempdimb<\pgf@xb%
-    \pgfutil@repeat%
-    \advance\pgfutil@tempdimb by-0.01pt\relax%
-    \ifdim\pgfutil@tempdimb<\pgf@xb%
-      {%
-        \pgf@xc=\pgfutil@tempdimb%
-        \pgf@yc=\pgf@ya%
-        \pgf@pos@transform{\pgf@xc}{\pgf@yc}
-        \pgf@nlt@moveto{\pgf@xc}{\pgf@yc}%
-        \pgf@xc=\pgfutil@tempdimb%
-        \pgf@yc=\pgf@yb%
-        \pgf@pos@transform{\pgf@xc}{\pgf@yc}
-        \pgf@nlt@lineto{\pgf@xc}{\pgf@yc}%
-      }%
-    \fi%
-  \fi%
-  \pgf@process{#3}%
-  \pgf@pos@transform{\pgf@x}{\pgf@y}%
-  \pgf@nlt@moveto{\pgf@x}{\pgf@y}%
-}
-
-
-
-% Append two half-parabolas to the path
-%
-% #1 = bend (relative to current point)
-% #2 = end point (relative to bend point)
-%
-% Description:
-%
-% This command appends a half-parabola that starts at the current point
-% and has its bend at #1+current point. Then, a second parabola is
-% appended that starts at #1+current point, where it also has its
-% minimum/maximum, and ends at #1+current point+#2, which becomes the
-% new current point.
-%
-% By setting #2 = (0,0) you draw only a half parabola that goes from the
-% current point to the bend; by setting #1 = (0,0)
-% you draw a half parabola that going to current point + #2 and has its
-% bend at the current point.
-%
-% Examples:
-%
-% % Half-parabola going ``up and right''
-% \pgfpathmoveto{\pgfpointorigin}
-% \pgfpathparabola{\pgfpointorigin}{\pgfpoint{2cm}{4cm}}
-%
-% % Half-parabola going ``down and right''
-% \pgfpathmoveto{\pgfpointorigin}
-% \pgfpathparabola{\pgfpoint{-2cm}{4cm}}}{\pgfpointorigin}
-%
-% % Full parabola
-% \pgfpathmoveto{\pgfpointorigin}
-% \pgfpathparabola{\pgfpoint{-2cm}{4cm}}{\pgfpoint{2cm}{4cm}}
-
-\def\pgfpathparabola#1#2{%
-  {%
-    \pgf@process{#2}% untransformed
-    \pgf@xb=\pgf@x%
-    \pgf@yb=\pgf@y%
-    \pgf@process{#1}% untransformed
-    \pgf@xc=\pgf@x%
-    \pgf@yc=\pgf@y%
-    \pgfutil@tempswatrue%
-    \ifdim\pgf@xb=0pt\relax%
-      \ifdim\pgf@yb=0pt\relax%
-        \pgfutil@tempswafalse%
-      \fi%
-    \fi%
-    {%
-      \ifpgfutil@tempswa%
-        \pgf@arccornersfalse
-      \else%
-      \fi%
-      \pgfutil@tempswatrue%
-      \ifdim\pgf@xc=0pt\relax%
-        \ifdim\pgf@yc=0pt\relax%
-          \pgfutil@tempswafalse%
-        \fi%
-      \fi%
-      \ifpgfutil@tempswa
-      {%
-        \pgf@pt@x=\pgf@path@lastx%
-        \pgf@pt@y=\pgf@path@lasty%
-        \pgfpathcurveto%
-          {\pgfqpoint{.1125\pgf@xc}{.225\pgf@yc}}% found by trial and error
-          {\pgfqpoint{.5\pgf@xc}{\pgf@yc}}% found by trial and error
-          {\pgfqpoint{\pgf@xc}{\pgf@yc}}%
-      }%
-      \fi%
-    }%
-    \ifpgfutil@tempswa%
-      \pgf@xc=\pgf@xb%
-      \pgf@yc=\pgf@yb%
-      {%
-        \pgf@pt@x=\pgf@path@lastx%
-        \pgf@pt@y=\pgf@path@lasty%
-        \pgfpathcurveto%
-          {\pgfqpoint{.5\pgf@xc}{0\pgf@yc}}% found by trial and error
-          {\pgfqpoint{.8875\pgf@xc}{.775\pgf@yc}}% found by trial and error
-          {\pgfqpoint{\pgf@xc}{\pgf@yc}}%
-      }%
-    \fi%
-  }%
-}
-
-
-
-
-% Append a sine curve between 0 and \pi/2 to the path.
-%
-% #1 = vector, describing the width and height of the curve
-%
-% Description:
-%
-% This command appends a sine curve in the interval 0 and \pi/2 to the
-% current path. The sine curve ends at currentpoint+#1.
-%
-% Examples:
-%
-% % One complete sine in the interval [0,\pi]
-% \pgfpathmoveto{\pgfpointorigin}
-% \pgfpathsine{\pgfpoint{1.57cm}{1cm}}
-% \pgfpathcosine{\pgfpoint{3.141cm}{0cm}}
-
-\def\pgfpathsine#1{%
-  {%
-    \pgf@process{#1}% untransformed
-    \pgf@xc=\pgf@x%
-    \pgf@yc=\pgf@y%
-    \pgf@pt@x=\pgf@path@lastx% evil trickery to transform to the last point
-    \pgf@pt@y=\pgf@path@lasty%
-    \pgfpathcurveto%
-      {\pgfqpoint{.3260\pgf@xc}{.5120\pgf@yc}}%
-      {\pgfqpoint{.6380\pgf@xc}{\pgf@yc}}%
-      {\pgfqpoint{\pgf@xc}{\pgf@yc}}%
-  }%
-}
-
-% Append a cosine curve between 0 and \pi/2 to the path.
-%
-% #1 = vector, describing the width and height of the curve
-%
-% Examples:
-%
-% % One complete sine in the interval [0,\pi]
-% \pgfpathmoveto{\pgfpointorigin}
-% \pgfpathsine{\pgfpoint{1.57cm}{1cm}}
-% \pgfpathcosine{\pgfpoint{3.141cm}{0cm}}
-
-\def\pgfpathcosine#1{%
-  {%
-    \pgf@process{#1}% untransformed
-    \pgf@xc=\pgf@x%
-    \pgf@yc=\pgf@y%
-    \pgf@pt@x=\pgf@path@lastx% evil trickery to transform to the last point
-    \pgf@pt@y=\pgf@path@lasty%
-    \pgfpathcurveto%
-      {\pgfqpoint{.3620\pgf@xc}{0pt}}%
-      {\pgfqpoint{.6740\pgf@xc}{.4880\pgf@yc}}%
-      {\pgfqpoint{\pgf@xc}{\pgf@yc}}%
-  }%
-}
-
-
-
-% Draw part of a curve between two specified times s and t.
-%
-% #1 - a start time s.
-% #2 - an end time t.
-% #3 - start point of the curve
-% #4 - first control
-% #5 - second control
-% #6 - end point of the curve
-%
-% There are two versions, \pgfpathcurvebetweentime and
-% \pgfpathcurvebetweentimecontinue. The latter does not insert a
-% moveto to the first point.
-%
-\def\pgfpathcurvebetweentime{\pgf@ignoremovetofalse\pgf@@pathcurvebetweentime}
-\def\pgfpathcurvebetweentimecontinue{\pgf@ignoremovetotrue\pgf@@pathcurvebetweentime}
-\newif\ifpgf@ignoremoveto
-
-\def\pgf@@pathcurvebetweentime#1#2#3#4#5#6{%
-  \pgfmathparse{#1}%
-  \let\pgf@time@s=\pgfmathresult%
-  \pgfmathparse{#2}%
-  \let\pgf@time@t=\pgfmathresult%
-  \ifdim\pgf@time@s pt>\pgf@time@t pt\relax%
-    \pgfmathsetmacro\pgf@time@s{1-#1}%
-    \pgfmathsetmacro\pgf@time@t{1-#2}%
-    \pgf@@@pathcurvebetweentime{\pgf@time@t}{#6}{#5}{#4}{#3}%
-  \else%
-    \pgf@@@pathcurvebetweentime{\pgf@time@t}{#3}{#4}{#5}{#6}%
-  \fi%
-}
-
-\def\pgf@@@pathcurvebetweentime#1#2#3#4#5{%
-  % Q1 = P1.
-  \pgf@process{#2}%
-  \pgf@xc=\pgf@x%
-  \pgf@yc=\pgf@y%
-  % Q2 = P1 + t*(P2-P1).
-  \pgf@process{%
-    \pgf@process{#3}%
-    \pgf@xa=#1\pgf@x%
-    \pgf@ya=#1\pgf@y%
-    \pgf@process{#2}%
-    \pgf@xb=\pgf@x%
-    \pgf@yb=\pgf@y%
-    \advance\pgf@x by-#1\pgf@xb%
-    \advance\pgf@y by-#1\pgf@yb%
-    \advance\pgf@x by\pgf@xa%
-    \advance\pgf@y by\pgf@ya%
-  }%
-  \pgf@xb=\pgf@x%
-  \pgf@yb=\pgf@y%
-  % Q3 = Q2 + t*((P2 + t*(P3-P2)) - Q2).
-  \pgf@process{%
-    \pgf@process{#4}%
-    \pgf@xa=#1\pgf@x%
-    \pgf@ya=#1\pgf@y%
-    %
-    \pgf@process{#3}%
-    \pgf@xc=\pgf@x%
-    \pgf@yc=\pgf@y%
-    \advance\pgf@xc by-#1\pgf@x%
-    \advance\pgf@yc by-#1\pgf@y%
-    %
-    \pgf@x=\pgf@xb%
-    \pgf@y=\pgf@yb%
-    \advance\pgf@x by#1\pgf@xa%
-    \advance\pgf@y by#1\pgf@ya%
-    \advance\pgf@x by-#1\pgf@xb%
-    \advance\pgf@y by-#1\pgf@yb%
-    \advance\pgf@x by#1\pgf@xc%
-    \advance\pgf@y by#1\pgf@yc%
-  }%
-  \pgf@xa=\pgf@x%
-  \pgf@ya=\pgf@y%
-  % Q4 = (1-t)^3*P1 + 3*t(1-t)^2*P2 + 3*t^2(1-t)*P3 + t^3*P4.
-  \pgf@process{\pgfpointcurveattime{#1}{#2}{#3}{#4}{#5}}%
-  \ifx#1\pgf@time@t%
-    % First time round...
-    \pgfmathdivide@{\pgf@time@s}{\pgf@time@t}%
-    \pgfmathadd@{-\pgfmathresult}{1}%
-    \let\pgf@time@s=\pgfmathresult%
-    \edef\pgf@marshal{%
-      \noexpand\pgf@@@pathcurvebetweentime{\noexpand\pgf@time@s}%
-        {\noexpand\pgfqpoint{\the\pgf@x}{\the\pgf@y}}{\noexpand\pgfqpoint{\the\pgf@xa}{\the\pgf@ya}}%
-        {\noexpand\pgfqpoint{\the\pgf@xb}{\the\pgf@yb}}{\noexpand\pgfqpoint{\the\pgf@xc}{\the\pgf@yc}}%
-    }%
-  \else%
-    % ...second time round.
-    \ifpgf@ignoremoveto%
-      \edef\pgf@marshal{%
-        \noexpand\pgfpathcurveto{\noexpand\pgfqpoint{\the\pgf@xa}{\the\pgf@ya}}%
-          {\noexpand\pgfqpoint{\the\pgf@xb}{\the\pgf@yb}}{\noexpand\pgfqpoint{\the\pgf@xc}{\the\pgf@yc}}%
-      }%
-    \else%
-      \edef\pgf@marshal{%
-        \noexpand\pgfpathmoveto{\noexpand\pgfqpoint{\the\pgf@x}{\the\pgf@y}}%
-        \noexpand\pgfpathcurveto{\noexpand\pgfqpoint{\the\pgf@xa}{\the\pgf@ya}}%
-          {\noexpand\pgfqpoint{\the\pgf@xb}{\the\pgf@yb}}{\noexpand\pgfqpoint{\the\pgf@xc}{\the\pgf@yc}}%
-      }%
-    \fi%
-  \fi%
-  \pgf@marshal%
-}
-
-
-\endinput