@itwin/core-orbitgt 4.0.0-dev.52 → 4.0.0-dev.55

package/lib/cjs/spatial/ecrs/projection/ObliqueMercator.d.ts

@@ -1,97 +1,97 @@
-/** @packageDocumentation
- * @module OrbitGT
- */
-declare type int32 = number;
-import { Coordinate } from "../../geom/Coordinate";
-import { CRS } from "../CRS";
-import { Operation } from "../Operation";
-import { OperationMethod } from "../OperationMethod";
-import { ParameterValueList } from "../ParameterValueList";
-/**
- * Class ObliqueMercator defines an Oblique Mercator projection (Hotine Variant B).
- *
- * The 'source' CRS is the geographic CRS.
- * The 'target' CRS is the projected CRS.
- *
- * Based on the following document:
- *
- * Coordinate Conversions and Transformations including Formulas
- * Guidance Note Number 7, part 2
- * Revised August 2006
- * Available at: http://www.epsg.org/
- *
- * Formulas: see 1.4.6 (spec v6.13): Oblique Mercator and Hotine Oblique Mercator
- *
- * @version 1.0 May 2008
- */
-/** @internal */
-export declare class ObliqueMercator extends OperationMethod {
-    /** The code of this method */
-    static readonly METHOD_CODE: int32;
-    /** The value of PI */
-    private static readonly PI;
-    /** Latitude of the projection center */
-    private _latC;
-    /** Longitude of the projection center */
-    private _lonC;
-    /** Azimuth of the initial line passing through the projection center */
-    private _aziC;
-    /** Angle from the recified grid to the skew (oblique) grid */
-    private _gamC;
-    /** Scale factor on the initial line of projection */
-    private _kC;
-    /** False easting at the center of projection */
-    private _eC;
-    /** False northing at the center of projection */
-    private _nC;
-    /** Forward calculation parameters */
-    private _a;
-    private _e;
-    private _e2;
-    private _B;
-    private _A;
-    private _tO;
-    private _D;
-    private _F;
-    private _H;
-    private _G;
-    private _gamO;
-    private _lonO;
-    private _vC;
-    private _uC;
-    /** Reverse calculation parameters */
-    private _rev1;
-    private _rev2;
-    private _rev3;
-    private _rev4;
-    /**
-       * Create a new projection.
-       * @param parameters the values of the parameters.
-       */
-    constructor(parameters: ParameterValueList);
-    /**
-       * Get the sign of a number.
-       */
-    private static sign;
-    /**
-       * Get the power of a number (must be able to handle negative 'n' values).
-       */
-    private static pow;
-    /**
-       * OperationMethod method.
-       * @see OperationMethod#initialize
-       */
-    initialize(operation: Operation): void;
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#forward
-       */
-    forward(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#reverse
-       */
-    reverse(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
-}
-export {};
+/** @packageDocumentation
+ * @module OrbitGT
+ */
+type int32 = number;
+import { Coordinate } from "../../geom/Coordinate";
+import { CRS } from "../CRS";
+import { Operation } from "../Operation";
+import { OperationMethod } from "../OperationMethod";
+import { ParameterValueList } from "../ParameterValueList";
+/**
+ * Class ObliqueMercator defines an Oblique Mercator projection (Hotine Variant B).
+ *
+ * The 'source' CRS is the geographic CRS.
+ * The 'target' CRS is the projected CRS.
+ *
+ * Based on the following document:
+ *
+ * Coordinate Conversions and Transformations including Formulas
+ * Guidance Note Number 7, part 2
+ * Revised August 2006
+ * Available at: http://www.epsg.org/
+ *
+ * Formulas: see 1.4.6 (spec v6.13): Oblique Mercator and Hotine Oblique Mercator
+ *
+ * @version 1.0 May 2008
+ */
+/** @internal */
+export declare class ObliqueMercator extends OperationMethod {
+    /** The code of this method */
+    static readonly METHOD_CODE: int32;
+    /** The value of PI */
+    private static readonly PI;
+    /** Latitude of the projection center */
+    private _latC;
+    /** Longitude of the projection center */
+    private _lonC;
+    /** Azimuth of the initial line passing through the projection center */
+    private _aziC;
+    /** Angle from the recified grid to the skew (oblique) grid */
+    private _gamC;
+    /** Scale factor on the initial line of projection */
+    private _kC;
+    /** False easting at the center of projection */
+    private _eC;
+    /** False northing at the center of projection */
+    private _nC;
+    /** Forward calculation parameters */
+    private _a;
+    private _e;
+    private _e2;
+    private _B;
+    private _A;
+    private _tO;
+    private _D;
+    private _F;
+    private _H;
+    private _G;
+    private _gamO;
+    private _lonO;
+    private _vC;
+    private _uC;
+    /** Reverse calculation parameters */
+    private _rev1;
+    private _rev2;
+    private _rev3;
+    private _rev4;
+    /**
+       * Create a new projection.
+       * @param parameters the values of the parameters.
+       */
+    constructor(parameters: ParameterValueList);
+    /**
+       * Get the sign of a number.
+       */
+    private static sign;
+    /**
+       * Get the power of a number (must be able to handle negative 'n' values).
+       */
+    private static pow;
+    /**
+       * OperationMethod method.
+       * @see OperationMethod#initialize
+       */
+    initialize(operation: Operation): void;
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#forward
+       */
+    forward(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#reverse
+       */
+    reverse(sourceCRS: CRS, source: Coordinate, targetCRS: CRS, target: Coordinate): void;
+}
+export {};
 //# sourceMappingURL=ObliqueMercator.d.ts.map

package/lib/cjs/spatial/ecrs/projection/ObliqueMercator.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"ObliqueMercator.d.ts","sourceRoot":"","sources":["../../../../../src/spatial/ecrs/projection/ObliqueMercator.ts"],"names":[],"mappings":"AAIA;;GAEG;AAMH,aAAK,KAAK,GAAG,MAAM,CAAC;AAIpB,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAC;AACnD,OAAO,EAAE,GAAG,EAAE,MAAM,QAAQ,CAAC;AAC7B,OAAO,EAAE,SAAS,EAAE,MAAM,cAAc,CAAC;AACzC,OAAO,EAAE,eAAe,EAAE,MAAM,oBAAoB,CAAC;AACrD,OAAO,EAAE,kBAAkB,EAAE,MAAM,uBAAuB,CAAC;AAE3D;;;;;;;;;;;;;;;;GAgBG;AACH,gBAAgB;AAChB,qBAAa,eAAgB,SAAQ,eAAe;IAChD,8BAA8B;IAC9B,gBAAuB,WAAW,EAAE,KAAK,CAAQ;IAEjD,sBAAsB;IACtB,OAAO,CAAC,MAAM,CAAC,QAAQ,CAAC,EAAE,CAAoB;IAE9C,wCAAwC;IACxC,OAAO,CAAC,KAAK,CAAU;IACvB,yCAAyC;IACzC,OAAO,CAAC,KAAK,CAAU;IACvB,wEAAwE;IACxE,OAAO,CAAC,KAAK,CAAU;IACvB,8DAA8D;IAC9D,OAAO,CAAC,KAAK,CAAU;IACvB,qDAAqD;IACrD,OAAO,CAAC,GAAG,CAAU;IACrB,gDAAgD;IAChD,OAAO,CAAC,GAAG,CAAU;IACrB,iDAAiD;IACjD,OAAO,CAAC,GAAG,CAAU;IAErB,qCAAqC;IACrC,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,GAAG,CAAU;IACrB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,GAAG,CAAU;IACrB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,GAAG,CAAU;IACrB,OAAO,CAAC,GAAG,CAAU;IACrB,qCAAqC;IACrC,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IAEvB;;;SAGK;gBACc,UAAU,EAAE,kBAAkB;IAYjD;;SAEK;IACL,OAAO,CAAC,MAAM,CAAC,IAAI;IAInB;;SAEK;IACL,OAAO,CAAC,MAAM,CAAC,GAAG;IAMlB;;;SAGK;IACW,UAAU,CAAC,SAAS,EAAE,SAAS,GAAG,IAAI;IAoCtD;;;SAGK;IACE,OAAO,CAAC,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,EAAE,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,GAAG,IAAI;IA+B5F;;;SAGK;IACE,OAAO,CAAC,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,EAAE,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,GAAG,IAAI;CAwB/F"}
+{"version":3,"file":"ObliqueMercator.d.ts","sourceRoot":"","sources":["../../../../../src/spatial/ecrs/projection/ObliqueMercator.ts"],"names":[],"mappings":"AAIA;;GAEG;AAMH,KAAK,KAAK,GAAG,MAAM,CAAC;AAIpB,OAAO,EAAE,UAAU,EAAE,MAAM,uBAAuB,CAAC;AACnD,OAAO,EAAE,GAAG,EAAE,MAAM,QAAQ,CAAC;AAC7B,OAAO,EAAE,SAAS,EAAE,MAAM,cAAc,CAAC;AACzC,OAAO,EAAE,eAAe,EAAE,MAAM,oBAAoB,CAAC;AACrD,OAAO,EAAE,kBAAkB,EAAE,MAAM,uBAAuB,CAAC;AAE3D;;;;;;;;;;;;;;;;GAgBG;AACH,gBAAgB;AAChB,qBAAa,eAAgB,SAAQ,eAAe;IAChD,8BAA8B;IAC9B,gBAAuB,WAAW,EAAE,KAAK,CAAQ;IAEjD,sBAAsB;IACtB,OAAO,CAAC,MAAM,CAAC,QAAQ,CAAC,EAAE,CAAoB;IAE9C,wCAAwC;IACxC,OAAO,CAAC,KAAK,CAAU;IACvB,yCAAyC;IACzC,OAAO,CAAC,KAAK,CAAU;IACvB,wEAAwE;IACxE,OAAO,CAAC,KAAK,CAAU;IACvB,8DAA8D;IAC9D,OAAO,CAAC,KAAK,CAAU;IACvB,qDAAqD;IACrD,OAAO,CAAC,GAAG,CAAU;IACrB,gDAAgD;IAChD,OAAO,CAAC,GAAG,CAAU;IACrB,iDAAiD;IACjD,OAAO,CAAC,GAAG,CAAU;IAErB,qCAAqC;IACrC,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,GAAG,CAAU;IACrB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,GAAG,CAAU;IACrB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,EAAE,CAAU;IACpB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,GAAG,CAAU;IACrB,OAAO,CAAC,GAAG,CAAU;IACrB,qCAAqC;IACrC,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IACvB,OAAO,CAAC,KAAK,CAAU;IAEvB;;;SAGK;gBACc,UAAU,EAAE,kBAAkB;IAYjD;;SAEK;IACL,OAAO,CAAC,MAAM,CAAC,IAAI;IAInB;;SAEK;IACL,OAAO,CAAC,MAAM,CAAC,GAAG;IAMlB;;;SAGK;IACW,UAAU,CAAC,SAAS,EAAE,SAAS,GAAG,IAAI;IAoCtD;;;SAGK;IACE,OAAO,CAAC,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,EAAE,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,GAAG,IAAI;IA+B5F;;;SAGK;IACE,OAAO,CAAC,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,EAAE,SAAS,EAAE,GAAG,EAAE,MAAM,EAAE,UAAU,GAAG,IAAI;CAwB/F"}

package/lib/cjs/spatial/ecrs/projection/ObliqueMercator.js

@@ -1,174 +1,174 @@
-"use strict";
-/*---------------------------------------------------------------------------------------------
-* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
-* See LICENSE.md in the project root for license terms and full copyright notice.
-*--------------------------------------------------------------------------------------------*/
-/** @packageDocumentation
- * @module OrbitGT
- */
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.ObliqueMercator = void 0;
-const OperationMethod_1 = require("../OperationMethod");
-/**
- * Class ObliqueMercator defines an Oblique Mercator projection (Hotine Variant B).
- *
- * The 'source' CRS is the geographic CRS.
- * The 'target' CRS is the projected CRS.
- *
- * Based on the following document:
- *
- * Coordinate Conversions and Transformations including Formulas
- * Guidance Note Number 7, part 2
- * Revised August 2006
- * Available at: http://www.epsg.org/
- *
- * Formulas: see 1.4.6 (spec v6.13): Oblique Mercator and Hotine Oblique Mercator
- *
- * @version 1.0 May 2008
- */
-/** @internal */
-class ObliqueMercator extends OperationMethod_1.OperationMethod {
-    /**
-       * Create a new projection.
-       * @param parameters the values of the parameters.
-       */
-    constructor(parameters) {
-        super(ObliqueMercator.METHOD_CODE, "Oblique Mercator", parameters);
-        /* Store the parameters */
-        this._latC = parameters.getValue(8811);
-        this._lonC = parameters.getValue(8812);
-        this._aziC = parameters.getValue(8813);
-        this._gamC = parameters.getValue(8814);
-        this._kC = parameters.getValue(8815);
-        this._eC = parameters.getValue(8816);
-        this._nC = parameters.getValue(8817);
-    }
-    /**
-       * Get the sign of a number.
-       */
-    static sign(v) {
-        return (v < 0.0) ? (-1.0) : (1.0);
-    }
-    /**
-       * Get the power of a number (must be able to handle negative 'n' values).
-       */
-    static pow(n, e) {
-        let p = 1.0;
-        for (let i = 0; i < e; i++)
-            p *= n;
-        return p;
-    }
-    /**
-       * OperationMethod method.
-       * @see OperationMethod#initialize
-       */
-    initialize(operation) {
-        /* Get the ellipsoid */
-        const sourceCRS = operation.getSourceCRS();
-        /* Prepare the forward parameters */
-        this._a = sourceCRS.getEllipsoid().getA();
-        this._e = sourceCRS.getEllipsoid().getE();
-        this._e2 = this._e * this._e;
-        this._B = Math.sqrt(1.0 + (this._e2 * ObliqueMercator.pow(Math.cos(this._latC), 4) / (1.0 - this._e2)));
-        const esinLatC = this._e * Math.sin(this._latC);
-        this._A = this._a * this._B * this._kC * Math.sqrt(1.0 - this._e2) / (1.0 - ObliqueMercator.pow(esinLatC, 2));
-        this._tO = Math.tan(ObliqueMercator.PI / 4.0 - this._latC / 2.0) / Math.pow((1.0 - esinLatC) / (1.0 + esinLatC), this._e / 2.0);
-        this._D = this._B * Math.sqrt(1.0 - this._e2) / (Math.cos(this._latC) * Math.sqrt(1.0 - ObliqueMercator.pow(esinLatC, 2)));
-        const D2 = (this._D < 1.0) ? (1.0) : (this._D * this._D);
-        this._F = this._D + Math.sqrt(D2 - 1.0) * ObliqueMercator.sign(this._latC);
-        this._H = this._F * Math.pow(this._tO, this._B);
-        this._G = (this._F - 1.0 / this._F) / 2.0;
-        this._gamO = Math.asin(Math.sin(this._aziC) / this._D);
-        // fix for Switzerland CRS 2056 projection error. LER, 19/06/2018
-        let w = this._G * Math.tan(this._gamO);
-        if (Math.abs(1.0 - w) < 1.0e-13)
-            w = 1.0; // Math.asin(0.9999999999999999) gives a 1.49e-8 difference from the asin(1.0) value, which leads to a 19 cm projection error
-        //        this._lonO = lonC-Math.asin(G*Math.tan(gamO))/B;
-        this._lonO = this._lonC - Math.asin(w) / this._B;
-        // end of fix
-        this._vC = 0.0;
-        if (Math.abs(this._aziC - 0.5 * ObliqueMercator.PI) < 1.0e-12)
-            this._uC = this._A * (this._lonC - this._lonO); // special case aziC==90 (Hungary, Switzerland)
-        else
-            this._uC = (this._A / this._B) * Math.atan(Math.sqrt(D2 - 1.0) / Math.cos(this._aziC)) * ObliqueMercator.sign(this._latC);
-        /* Prepare the reverse parameters */
-        const e4 = this._e2 * this._e2;
-        const e6 = e4 * this._e2;
-        const e8 = e4 * e4;
-        this._rev1 = (this._e2 / 2.0 + 5.0 * e4 / 24.0 + e6 / 12.0 + 13.0 * e8 / 360.0);
-        this._rev2 = (7.0 * e4 / 48.0 + 29.0 * e6 / 240.0 + 811.0 * e8 / 11520.0);
-        this._rev3 = (7.0 * e6 / 120.0 + 81.0 * e8 / 1120.0);
-        this._rev4 = (4279.0 * e8 / 161280.0);
-    }
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#forward
-       */
-    forward(sourceCRS, source, targetCRS, target) {
-        /* Get the parameters (radians) */
-        const lon = source.getX();
-        const lat = source.getY();
-        /* Make the calculation */
-        const esinLat = this._e * Math.sin(lat);
-        const t = Math.tan(ObliqueMercator.PI / 4.0 - lat / 2.0) / Math.pow((1.0 - esinLat) / (1.0 + esinLat), this._e / 2.0);
-        const Q = this._H / Math.pow(t, this._B);
-        const S = (Q - 1.0 / Q) / 2.0;
-        const T = (Q + 1.0 / Q) / 2.0;
-        const V = Math.sin(this._B * (lon - this._lonO));
-        const U = (-V * Math.cos(this._gamO) + S * Math.sin(this._gamO)) / T;
-        const v = this._A * Math.log((1.0 - U) / (1.0 + U)) / (2.0 * this._B);
-        let u;
-        if (Math.abs(this._aziC - 0.5 * ObliqueMercator.PI) < 1.0e-12) // aziC==90? new in guidance note 2 version 8.5. LER, 21/09/2016
-         {
-            if (lon == this._lonC)
-                u = 0.0;
-            else
-                u = (this._A * Math.atan((S * Math.cos(this._gamO) + V * Math.sin(this._gamO)) / Math.cos(this._B * (lon - this._lonO))) / this._B) - (Math.abs(this._uC) * ObliqueMercator.sign(this._latC) * ObliqueMercator.sign(this._lonC - lon));
-        }
-        else {
-            u = (this._A * Math.atan((S * Math.cos(this._gamO) + V * Math.sin(this._gamO)) / Math.cos(this._B * (lon - this._lonO))) / this._B) - (Math.abs(this._uC) * ObliqueMercator.sign(this._latC));
-        }
-        const sinGamC = Math.sin(this._gamC);
-        const cosGamC = Math.cos(this._gamC);
-        const E = v * cosGamC + u * sinGamC + this._eC;
-        const N = u * cosGamC - v * sinGamC + this._nC;
-        /* Save the position */
-        target.setX(E);
-        target.setY(N);
-        target.setZ(source.getZ()); // Keep the Z value
-    }
-    /**
-       * OperationMethod interface method.
-       * @see OperationMethod#reverse
-       */
-    reverse(sourceCRS, source, targetCRS, target) {
-        /* Get the parameters */
-        const E = target.getX();
-        const N = target.getY();
-        /* Make the calculation */
-        const sinGamC = Math.sin(this._gamC);
-        const cosGamC = Math.cos(this._gamC);
-        const v = (E - this._eC) * cosGamC - (N - this._nC) * sinGamC;
-        const u = (N - this._nC) * cosGamC + (E - this._eC) * sinGamC + (Math.abs(this._uC) * ObliqueMercator.sign(this._latC));
-        const Q = Math.exp(-this._B * v / this._A);
-        const S = (Q - 1.0 / Q) / 2.0;
-        const T = (Q + 1.0 / Q) / 2.0;
-        const V = Math.sin(this._B * u / this._A);
-        const U = (V * Math.cos(this._gamO) + S * Math.sin(this._gamO)) / T;
-        const t = Math.pow(this._H / Math.sqrt((1.0 + U) / (1.0 - U)), 1.0 / this._B);
-        const chi = ObliqueMercator.PI / 2.0 - 2.0 * Math.atan(t);
-        const lat = chi + Math.sin(2.0 * chi) * this._rev1 + Math.sin(4.0 * chi) * this._rev2 + Math.sin(6.0 * chi) * this._rev3 + Math.sin(8.0 * chi) * this._rev4;
-        //        double lon = lonO-Math.atan((S*Math.cos(gamO)-V*Math.sin(gamO))/Math.cos(B*u/A))/B;
-        const lon = this._lonO - Math.atan2((S * Math.cos(this._gamO) - V * Math.sin(this._gamO)), Math.cos(this._B * u / this._A)) / this._B; // replaced atan(y/x) by atan2(y,x). LER, 23/05/2017
-        /* Save the position */
-        source.setX(lon);
-        source.setY(lat);
-        source.setZ(target.getZ()); // Keep the Z value
-    }
-}
-exports.ObliqueMercator = ObliqueMercator;
-/** The code of this method */
-ObliqueMercator.METHOD_CODE = 9815; // Hotine Variant B
-/** The value of PI */
-ObliqueMercator.PI = Math.PI;
+"use strict";
+/*---------------------------------------------------------------------------------------------
+* Copyright (c) Bentley Systems, Incorporated. All rights reserved.
+* See LICENSE.md in the project root for license terms and full copyright notice.
+*--------------------------------------------------------------------------------------------*/
+/** @packageDocumentation
+ * @module OrbitGT
+ */
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.ObliqueMercator = void 0;
+const OperationMethod_1 = require("../OperationMethod");
+/**
+ * Class ObliqueMercator defines an Oblique Mercator projection (Hotine Variant B).
+ *
+ * The 'source' CRS is the geographic CRS.
+ * The 'target' CRS is the projected CRS.
+ *
+ * Based on the following document:
+ *
+ * Coordinate Conversions and Transformations including Formulas
+ * Guidance Note Number 7, part 2
+ * Revised August 2006
+ * Available at: http://www.epsg.org/
+ *
+ * Formulas: see 1.4.6 (spec v6.13): Oblique Mercator and Hotine Oblique Mercator
+ *
+ * @version 1.0 May 2008
+ */
+/** @internal */
+class ObliqueMercator extends OperationMethod_1.OperationMethod {
+    /**
+       * Create a new projection.
+       * @param parameters the values of the parameters.
+       */
+    constructor(parameters) {
+        super(ObliqueMercator.METHOD_CODE, "Oblique Mercator", parameters);
+        /* Store the parameters */
+        this._latC = parameters.getValue(8811);
+        this._lonC = parameters.getValue(8812);
+        this._aziC = parameters.getValue(8813);
+        this._gamC = parameters.getValue(8814);
+        this._kC = parameters.getValue(8815);
+        this._eC = parameters.getValue(8816);
+        this._nC = parameters.getValue(8817);
+    }
+    /**
+       * Get the sign of a number.
+       */
+    static sign(v) {
+        return (v < 0.0) ? (-1.0) : (1.0);
+    }
+    /**
+       * Get the power of a number (must be able to handle negative 'n' values).
+       */
+    static pow(n, e) {
+        let p = 1.0;
+        for (let i = 0; i < e; i++)
+            p *= n;
+        return p;
+    }
+    /**
+       * OperationMethod method.
+       * @see OperationMethod#initialize
+       */
+    initialize(operation) {
+        /* Get the ellipsoid */
+        const sourceCRS = operation.getSourceCRS();
+        /* Prepare the forward parameters */
+        this._a = sourceCRS.getEllipsoid().getA();
+        this._e = sourceCRS.getEllipsoid().getE();
+        this._e2 = this._e * this._e;
+        this._B = Math.sqrt(1.0 + (this._e2 * ObliqueMercator.pow(Math.cos(this._latC), 4) / (1.0 - this._e2)));
+        const esinLatC = this._e * Math.sin(this._latC);
+        this._A = this._a * this._B * this._kC * Math.sqrt(1.0 - this._e2) / (1.0 - ObliqueMercator.pow(esinLatC, 2));
+        this._tO = Math.tan(ObliqueMercator.PI / 4.0 - this._latC / 2.0) / Math.pow((1.0 - esinLatC) / (1.0 + esinLatC), this._e / 2.0);
+        this._D = this._B * Math.sqrt(1.0 - this._e2) / (Math.cos(this._latC) * Math.sqrt(1.0 - ObliqueMercator.pow(esinLatC, 2)));
+        const D2 = (this._D < 1.0) ? (1.0) : (this._D * this._D);
+        this._F = this._D + Math.sqrt(D2 - 1.0) * ObliqueMercator.sign(this._latC);
+        this._H = this._F * Math.pow(this._tO, this._B);
+        this._G = (this._F - 1.0 / this._F) / 2.0;
+        this._gamO = Math.asin(Math.sin(this._aziC) / this._D);
+        // fix for Switzerland CRS 2056 projection error. LER, 19/06/2018
+        let w = this._G * Math.tan(this._gamO);
+        if (Math.abs(1.0 - w) < 1.0e-13)
+            w = 1.0; // Math.asin(0.9999999999999999) gives a 1.49e-8 difference from the asin(1.0) value, which leads to a 19 cm projection error
+        //        this._lonO = lonC-Math.asin(G*Math.tan(gamO))/B;
+        this._lonO = this._lonC - Math.asin(w) / this._B;
+        // end of fix
+        this._vC = 0.0;
+        if (Math.abs(this._aziC - 0.5 * ObliqueMercator.PI) < 1.0e-12)
+            this._uC = this._A * (this._lonC - this._lonO); // special case aziC==90 (Hungary, Switzerland)
+        else
+            this._uC = (this._A / this._B) * Math.atan(Math.sqrt(D2 - 1.0) / Math.cos(this._aziC)) * ObliqueMercator.sign(this._latC);
+        /* Prepare the reverse parameters */
+        const e4 = this._e2 * this._e2;
+        const e6 = e4 * this._e2;
+        const e8 = e4 * e4;
+        this._rev1 = (this._e2 / 2.0 + 5.0 * e4 / 24.0 + e6 / 12.0 + 13.0 * e8 / 360.0);
+        this._rev2 = (7.0 * e4 / 48.0 + 29.0 * e6 / 240.0 + 811.0 * e8 / 11520.0);
+        this._rev3 = (7.0 * e6 / 120.0 + 81.0 * e8 / 1120.0);
+        this._rev4 = (4279.0 * e8 / 161280.0);
+    }
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#forward
+       */
+    forward(sourceCRS, source, targetCRS, target) {
+        /* Get the parameters (radians) */
+        const lon = source.getX();
+        const lat = source.getY();
+        /* Make the calculation */
+        const esinLat = this._e * Math.sin(lat);
+        const t = Math.tan(ObliqueMercator.PI / 4.0 - lat / 2.0) / Math.pow((1.0 - esinLat) / (1.0 + esinLat), this._e / 2.0);
+        const Q = this._H / Math.pow(t, this._B);
+        const S = (Q - 1.0 / Q) / 2.0;
+        const T = (Q + 1.0 / Q) / 2.0;
+        const V = Math.sin(this._B * (lon - this._lonO));
+        const U = (-V * Math.cos(this._gamO) + S * Math.sin(this._gamO)) / T;
+        const v = this._A * Math.log((1.0 - U) / (1.0 + U)) / (2.0 * this._B);
+        let u;
+        if (Math.abs(this._aziC - 0.5 * ObliqueMercator.PI) < 1.0e-12) // aziC==90? new in guidance note 2 version 8.5. LER, 21/09/2016
+         {
+            if (lon == this._lonC)
+                u = 0.0;
+            else
+                u = (this._A * Math.atan((S * Math.cos(this._gamO) + V * Math.sin(this._gamO)) / Math.cos(this._B * (lon - this._lonO))) / this._B) - (Math.abs(this._uC) * ObliqueMercator.sign(this._latC) * ObliqueMercator.sign(this._lonC - lon));
+        }
+        else {
+            u = (this._A * Math.atan((S * Math.cos(this._gamO) + V * Math.sin(this._gamO)) / Math.cos(this._B * (lon - this._lonO))) / this._B) - (Math.abs(this._uC) * ObliqueMercator.sign(this._latC));
+        }
+        const sinGamC = Math.sin(this._gamC);
+        const cosGamC = Math.cos(this._gamC);
+        const E = v * cosGamC + u * sinGamC + this._eC;
+        const N = u * cosGamC - v * sinGamC + this._nC;
+        /* Save the position */
+        target.setX(E);
+        target.setY(N);
+        target.setZ(source.getZ()); // Keep the Z value
+    }
+    /**
+       * OperationMethod interface method.
+       * @see OperationMethod#reverse
+       */
+    reverse(sourceCRS, source, targetCRS, target) {
+        /* Get the parameters */
+        const E = target.getX();
+        const N = target.getY();
+        /* Make the calculation */
+        const sinGamC = Math.sin(this._gamC);
+        const cosGamC = Math.cos(this._gamC);
+        const v = (E - this._eC) * cosGamC - (N - this._nC) * sinGamC;
+        const u = (N - this._nC) * cosGamC + (E - this._eC) * sinGamC + (Math.abs(this._uC) * ObliqueMercator.sign(this._latC));
+        const Q = Math.exp(-this._B * v / this._A);
+        const S = (Q - 1.0 / Q) / 2.0;
+        const T = (Q + 1.0 / Q) / 2.0;
+        const V = Math.sin(this._B * u / this._A);
+        const U = (V * Math.cos(this._gamO) + S * Math.sin(this._gamO)) / T;
+        const t = Math.pow(this._H / Math.sqrt((1.0 + U) / (1.0 - U)), 1.0 / this._B);
+        const chi = ObliqueMercator.PI / 2.0 - 2.0 * Math.atan(t);
+        const lat = chi + Math.sin(2.0 * chi) * this._rev1 + Math.sin(4.0 * chi) * this._rev2 + Math.sin(6.0 * chi) * this._rev3 + Math.sin(8.0 * chi) * this._rev4;
+        //        double lon = lonO-Math.atan((S*Math.cos(gamO)-V*Math.sin(gamO))/Math.cos(B*u/A))/B;
+        const lon = this._lonO - Math.atan2((S * Math.cos(this._gamO) - V * Math.sin(this._gamO)), Math.cos(this._B * u / this._A)) / this._B; // replaced atan(y/x) by atan2(y,x). LER, 23/05/2017
+        /* Save the position */
+        source.setX(lon);
+        source.setY(lat);
+        source.setZ(target.getZ()); // Keep the Z value
+    }
+}
+/** The code of this method */
+ObliqueMercator.METHOD_CODE = 9815; // Hotine Variant B
+/** The value of PI */
+ObliqueMercator.PI = Math.PI;
+exports.ObliqueMercator = ObliqueMercator;
 //# sourceMappingURL=ObliqueMercator.js.map