@itwin/core-geometry 5.3.0-dev.16 → 5.3.0-dev.18

package/lib/esm/curve/spiral/TransitionConditionalProperties.d.ts

@@ -1,53 +1,55 @@
 import { Angle } from "../../geometry3d/Angle";
-/** A true transition spiral is a curve defined by its curvature, with the curvature function symmetric about midpoint.
+/**
+ * A true transition spiral is a curve defined by its curvature, with the curvature function symmetric about midpoint.
  * * The symmetry condition creates a relationship among the following 4 quantities:
  * ** curvature0 = curvature (i.e. 1/radius) at start
  * ** curvature1 = curvature (i.e. 1/radius) at end
  * ** sweepRadians = signed turning angle from start to end
  * ** arcLength = length of curve
- * * The relationship is the equation
+ * * The relationship is the equation:
  * ** `sweepRadians = arcLength * average Curvature = arcLength * 0.5 * (curvature0 + curvature1)`
- * * That is, regardless of any curvature properties other than symmetry, specifying any 3 of the quantities fully determines the remaining one.
+ * * That is, regardless of any curvature properties other than symmetry, specifying any 3 of the quantities fully
+ * determines the remaining one.
  * @public
  */
 export declare class TransitionConditionalProperties {
-    /** radius (or 0 at start) */
+    /** Radius (or 0 at start). */
     radius0: number | undefined;
-    /** radius (or 0) at end */
+    /** Radius (or 0) at end. */
     radius1: number | undefined;
-    /** bearing at start, measured from x towards y */
+    /** Bearing at start, measured from x towards y. */
     bearing0: Angle | undefined;
-    /** bearing at end, measured from x towards y */
+    /** Bearing at end, measured from x towards y. */
     bearing1: Angle | undefined;
-    /** curve length */
+    /** Curve length. */
     curveLength: number | undefined;
     /**
-     * capture numeric or undefined values
-     * @param radius0 start radius or undefined
-     * @param radius1 end radius or undefined
-     * @param bearing0 start bearing or undefined
-     * @param bearing1 end bearing or undefined
-     * @param arcLength arc length or undefined
+     * Capture numeric or undefined values.
+     * @param radius0 start radius or undefined.
+     * @param radius1 end radius or undefined.
+     * @param bearing0 start bearing or undefined.
+     * @param bearing1 end bearing or undefined.
+     * @param arcLength arc length or undefined.
      */
     constructor(radius0: number | undefined, radius1: number | undefined, bearing0: Angle | undefined, bearing1: Angle | undefined, arcLength: number | undefined);
-    /** return the number of defined values among the 5 properties. */
+    /** Return the number of defined values among the 5 properties. */
     numDefinedProperties(): number;
-    /** clone with all properties (i.e. preserve undefined states) */
+    /** Clone with all 5 properties (i.e., preserve undefined states). */
     clone(): TransitionConditionalProperties;
-    /** Return true if all components are defined and agree equationally. */
+    /** Return true if all 5 properties are defined and agree equationally. */
     getIsValidCompleteSet(): boolean;
-    /** Examine which properties are defined and compute the (single) undefined.
-     * @returns Return true if the input state had precisely one undefined member.
+    /**
+     * Examine which properties are defined and compute the (single) undefined.
+     * @returns true if the input state had precisely one undefined member.
      */
     tryResolveAnySingleUnknown(): boolean;
     private almostEqualCoordinate;
     private almostEqualBearing;
-    /**
-     * Test if this and other have matching numeric and undefined members.
-     */
+    /** Test if `this` and `other` have matching numeric and undefined members. */
     isAlmostEqual(other?: TransitionConditionalProperties): boolean;
-    /** Apply a NONZERO scale factor to all distances. */
+    /** Apply a NONZERO scale factor to all distances. If `a` is zero, do nothing. */
     applyScaleFactor(a: number): void;
+    /** Test if `a` and `b` have matching numeric and undefined members. */
     static areAlmostEqual(a: TransitionConditionalProperties | undefined, b: TransitionConditionalProperties | undefined): boolean;
 }
 //# sourceMappingURL=TransitionConditionalProperties.d.ts.map

package/lib/esm/curve/spiral/TransitionConditionalProperties.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"TransitionConditionalProperties.d.ts","sourceRoot":"","sources":["../../../../src/curve/spiral/TransitionConditionalProperties.ts"],"names":[],"mappings":"AASA,OAAO,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AAG/C;;;;;;;;;;GAUG;AACH,qBAAa,+BAA+B;IAC1C,6BAA6B;IACtB,OAAO,EAAE,MAAM,GAAG,SAAS,CAAC;IACnC,2BAA2B;IACpB,OAAO,EAAE,MAAM,GAAG,SAAS,CAAC;IACnC,kDAAkD;IAC3C,QAAQ,EAAE,KAAK,GAAG,SAAS,CAAC;IACnC,gDAAgD;IACzC,QAAQ,EAAE,KAAK,GAAG,SAAS,CAAC;IACnC,mBAAmB;IACZ,WAAW,EAAE,MAAM,GAAG,SAAS,CAAC;IACvC;;;;;;;OAOG;gBAED,OAAO,EAAE,MAAM,GAAG,SAAS,EAC3B,OAAO,EAAE,MAAM,GAAG,SAAS,EAC3B,QAAQ,EAAE,KAAK,GAAG,SAAS,EAC3B,QAAQ,EAAE,KAAK,GAAG,SAAS,EAC3B,SAAS,EAAE,MAAM,GAAG,SAAS;IAO/B,kEAAkE;IAC3D,oBAAoB;IAO3B,iEAAiE;IAC1D,KAAK,IAAI,+BAA+B;IAQ/C,wEAAwE;IACjE,qBAAqB;IAS5B;;OAEG;IACI,0BAA0B,IAAI,OAAO;IAkC5C,OAAO,CAAC,qBAAqB;IAO7B,OAAO,CAAC,kBAAkB;IAQ1B;;OAEG;IAEI,aAAa,CAAC,KAAK,CAAC,EAAE,+BAA+B;IAe5D,qDAAqD;IAC9C,gBAAgB,CAAC,CAAC,EAAE,MAAM;WAQnB,cAAc,CAAC,CAAC,EAAE,+BAA+B,GAAG,SAAS,EAAE,CAAC,EAAE,+BAA+B,GAAG,SAAS,GAAG,OAAO;CAKtI"}
+{"version":3,"file":"TransitionConditionalProperties.d.ts","sourceRoot":"","sources":["../../../../src/curve/spiral/TransitionConditionalProperties.ts"],"names":[],"mappings":"AASA,OAAO,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AAG/C;;;;;;;;;;;;GAYG;AACH,qBAAa,+BAA+B;IAC1C,8BAA8B;IACvB,OAAO,EAAE,MAAM,GAAG,SAAS,CAAC;IACnC,4BAA4B;IACrB,OAAO,EAAE,MAAM,GAAG,SAAS,CAAC;IACnC,mDAAmD;IAC5C,QAAQ,EAAE,KAAK,GAAG,SAAS,CAAC;IACnC,iDAAiD;IAC1C,QAAQ,EAAE,KAAK,GAAG,SAAS,CAAC;IACnC,oBAAoB;IACb,WAAW,EAAE,MAAM,GAAG,SAAS,CAAC;IACvC;;;;;;;OAOG;gBAED,OAAO,EAAE,MAAM,GAAG,SAAS,EAC3B,OAAO,EAAE,MAAM,GAAG,SAAS,EAC3B,QAAQ,EAAE,KAAK,GAAG,SAAS,EAC3B,QAAQ,EAAE,KAAK,GAAG,SAAS,EAC3B,SAAS,EAAE,MAAM,GAAG,SAAS;IAQ/B,kEAAkE;IAC3D,oBAAoB;IAO3B,qEAAqE;IAC9D,KAAK,IAAI,+BAA+B;IAS/C,0EAA0E;IACnE,qBAAqB,IAAI,OAAO;IAUvC;;;OAGG;IACI,0BAA0B,IAAI,OAAO;IAsC5C,OAAO,CAAC,qBAAqB;IAO7B,OAAO,CAAC,kBAAkB;IAO1B,8EAA8E;IACvE,aAAa,CAAC,KAAK,CAAC,EAAE,+BAA+B,GAAG,OAAO;IAetE,iFAAiF;IAC1E,gBAAgB,CAAC,CAAC,EAAE,MAAM,GAAG,IAAI;IAUxC,uEAAuE;WACzD,cAAc,CAC1B,CAAC,EAAE,+BAA+B,GAAG,SAAS,EAAE,CAAC,EAAE,+BAA+B,GAAG,SAAS,GAC7F,OAAO;CAKX"}

package/lib/esm/curve/spiral/TransitionConditionalProperties.js

@@ -8,36 +8,37 @@
 import { Geometry } from "../../Geometry";
 import { Angle } from "../../geometry3d/Angle";
 import { TransitionSpiral3d } from "./TransitionSpiral3d";
-// import {} from "./";
-/** A true transition spiral is a curve defined by its curvature, with the curvature function symmetric about midpoint.
+/**
+ * A true transition spiral is a curve defined by its curvature, with the curvature function symmetric about midpoint.
  * * The symmetry condition creates a relationship among the following 4 quantities:
  * ** curvature0 = curvature (i.e. 1/radius) at start
  * ** curvature1 = curvature (i.e. 1/radius) at end
  * ** sweepRadians = signed turning angle from start to end
  * ** arcLength = length of curve
- * * The relationship is the equation
+ * * The relationship is the equation:
  * ** `sweepRadians = arcLength * average Curvature = arcLength * 0.5 * (curvature0 + curvature1)`
- * * That is, regardless of any curvature properties other than symmetry, specifying any 3 of the quantities fully determines the remaining one.
+ * * That is, regardless of any curvature properties other than symmetry, specifying any 3 of the quantities fully
+ * determines the remaining one.
  * @public
  */
 export class TransitionConditionalProperties {
-    /** radius (or 0 at start) */
+    /** Radius (or 0 at start). */
     radius0;
-    /** radius (or 0) at end */
+    /** Radius (or 0) at end. */
     radius1;
-    /** bearing at start, measured from x towards y */
+    /** Bearing at start, measured from x towards y. */
     bearing0;
-    /** bearing at end, measured from x towards y */
+    /** Bearing at end, measured from x towards y. */
     bearing1;
-    /** curve length */
+    /** Curve length. */
     curveLength;
     /**
-     * capture numeric or undefined values
-     * @param radius0 start radius or undefined
-     * @param radius1 end radius or undefined
-     * @param bearing0 start bearing or undefined
-     * @param bearing1 end bearing or undefined
-     * @param arcLength arc length or undefined
+     * Capture numeric or undefined values.
+     * @param radius0 start radius or undefined.
+     * @param radius1 end radius or undefined.
+     * @param bearing0 start bearing or undefined.
+     * @param bearing1 end bearing or undefined.
+     * @param arcLength arc length or undefined.
      */
     constructor(radius0, radius1, bearing0, bearing1, arcLength) {
         this.radius0 = radius0;
@@ -46,7 +47,7 @@ export class TransitionConditionalProperties {
         this.bearing1 = bearing1;
         this.curveLength = arcLength;
     }
-    /** return the number of defined values among the 5 properties. */
+    /** Return the number of defined values among the 5 properties. */
     numDefinedProperties() {
         return Geometry.defined01(this.radius0)
             + Geometry.defined01(this.radius1)
@@ -54,21 +55,22 @@ export class TransitionConditionalProperties {
             + Geometry.defined01(this.bearing1)
             + Geometry.defined01(this.curveLength);
     }
-    /** clone with all properties (i.e. preserve undefined states) */
+    /** Clone with all 5 properties (i.e., preserve undefined states). */
     clone() {
         return new TransitionConditionalProperties(this.radius0, this.radius1, this.bearing0 === undefined ? undefined : this.bearing0.clone(), this.bearing1 === undefined ? undefined : this.bearing1.clone(), this.curveLength);
     }
-    /** Return true if all components are defined and agree equationally. */
+    /** Return true if all 5 properties are defined and agree equationally. */
     getIsValidCompleteSet() {
         if (this.curveLength !== undefined && this.bearing0 !== undefined && this.bearing1 !== undefined
             && this.radius0 !== undefined && this.radius1 !== undefined) {
-            const length1 = TransitionSpiral3d.radiusRadiusSweepRadiansToArcLength(this.radius0, this.radius1, this.bearing1.radians - this.bearing0.radians);
-            return Geometry.isSameCoordinate(this.curveLength, length1);
+            const arcLength = TransitionSpiral3d.radiusRadiusSweepRadiansToArcLength(this.radius0, this.radius1, this.bearing1.radians - this.bearing0.radians);
+            return Geometry.isSameCoordinate(this.curveLength, arcLength);
         }
         return false;
     }
-    /** Examine which properties are defined and compute the (single) undefined.
-     * @returns Return true if the input state had precisely one undefined member.
+    /**
+     * Examine which properties are defined and compute the (single) undefined.
+     * @returns true if the input state had precisely one undefined member.
      */
     tryResolveAnySingleUnknown() {
         if (this.getIsValidCompleteSet())
@@ -89,15 +91,17 @@ export class TransitionConditionalProperties {
             }
             return false;
         }
-        // at least one bearing is undefined ...
+        // at least one bearing is undefined
         if (this.curveLength === undefined || this.radius0 === undefined || this.radius1 === undefined)
             return false;
         if (this.bearing0) { // bearing 1 is undefined
-            this.bearing1 = Angle.createRadians(this.bearing0.radians + TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength));
+            this.bearing1 = Angle.createRadians(this.bearing0.radians +
+                TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength));
             return true;
         }
         if (this.bearing1) { // bearing 0 is undefined
-            this.bearing0 = Angle.createRadians(this.bearing1.radians - TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength));
+            this.bearing0 = Angle.createRadians(this.bearing1.radians -
+                TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength));
             return true;
         }
         return false;
@@ -116,9 +120,7 @@ export class TransitionConditionalProperties {
             return a.isAlmostEqualNoPeriodShift(b);
         return false;
     }
-    /**
-     * Test if this and other have matching numeric and undefined members.
-     */
+    /** Test if `this` and `other` have matching numeric and undefined members. */
     isAlmostEqual(other) {
         if (!other)
             return false;
@@ -134,8 +136,10 @@ export class TransitionConditionalProperties {
             return false;
         return true;
     }
-    /** Apply a NONZERO scale factor to all distances. */
+    /** Apply a NONZERO scale factor to all distances. If `a` is zero, do nothing. */
     applyScaleFactor(a) {
+        if (a === 0)
+            return;
         if (this.radius0 !== undefined)
             this.radius0 *= a;
         if (this.radius1 !== undefined)
@@ -143,6 +147,7 @@ export class TransitionConditionalProperties {
         if (this.curveLength !== undefined)
             this.curveLength *= a;
     }
+    /** Test if `a` and `b` have matching numeric and undefined members. */
     static areAlmostEqual(a, b) {
         if (a === undefined)
             return b === undefined;

package/lib/esm/curve/spiral/TransitionConditionalProperties.js.map

@@ -1 +1 @@
-{"version":3,"file":"TransitionConditionalProperties.js","sourceRoot":"","sources":["../../../../src/curve/spiral/TransitionConditionalProperties.ts"],"names":[],"mappings":"AAAA;;;+FAG+F;AAE/F;;GAEG;AACH,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAC1C,OAAO,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AAC/C,OAAO,EAAE,kBAAkB,EAAE,MAAM,sBAAsB,CAAC;AAC1D,uBAAuB;AACvB;;;;;;;;;;GAUG;AACH,MAAM,OAAO,+BAA+B;IAC1C,6BAA6B;IACtB,OAAO,CAAqB;IACnC,2BAA2B;IACpB,OAAO,CAAqB;IACnC,kDAAkD;IAC3C,QAAQ,CAAoB;IACnC,gDAAgD;IACzC,QAAQ,CAAoB;IACnC,mBAAmB;IACZ,WAAW,CAAqB;IACvC;;;;;;;OAOG;IACH,YACE,OAA2B,EAC3B,OAA2B,EAC3B,QAA2B,EAC3B,QAA2B,EAC3B,SAA6B;QAC7B,IAAI,CAAC,OAAO,GAAG,OAAO,CAAC;QACvB,IAAI,CAAC,OAAO,GAAG,OAAO,CAAC;QACvB,IAAI,CAAC,QAAQ,GAAG,QAAQ,CAAC;QACzB,IAAI,CAAC,QAAQ,GAAG,QAAQ,CAAC;QACzB,IAAI,CAAC,WAAW,GAAG,SAAS,CAAC;IAC/B,CAAC;IACD,kEAAkE;IAC3D,oBAAoB;QACzB,OAAO,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,OAAO,CAAC;cACnC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,OAAO,CAAC;cAChC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,QAAQ,CAAC;cACjC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,QAAQ,CAAC;cACjC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC;IAC3C,CAAC;IACD,iEAAiE;IAC1D,KAAK;QACV,OAAO,IAAI,+BAA+B,CACxC,IAAI,CAAC,OAAO,EACZ,IAAI,CAAC,OAAO,EACZ,IAAI,CAAC,QAAQ,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,EAC/D,IAAI,CAAC,QAAQ,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,EAC/D,IAAI,CAAC,WAAW,CAAC,CAAC;IACtB,CAAC;IACD,wEAAwE;IACjE,qBAAqB;QAC1B,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,QAAQ,KAAK,SAAS,IAAI,IAAI,CAAC,QAAQ,KAAK,SAAS;eAC3F,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;YAC9D,MAAM,OAAO,GAAG,kBAAkB,CAAC,mCAAmC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAC/F,IAAI,CAAC,QAAQ,CAAC,OAAO,GAAG,IAAI,CAAC,QAAQ,CAAC,OAAO,CAAC,CAAC;YACjD,OAAO,QAAQ,CAAC,gBAAgB,CAAC,IAAI,CAAC,WAAW,EAAE,OAAO,CAAC,CAAC;QAC9D,CAAC;QACD,OAAO,KAAK,CAAC;IACf,CAAC;IACD;;OAEG;IACI,0BAA0B;QAC/B,IAAI,IAAI,CAAC,qBAAqB,EAAE;YAC9B,OAAO,IAAI,CAAC;QACd,IAAI,IAAI,CAAC,QAAQ,IAAI,IAAI,CAAC,QAAQ,EAAE,CAAC;YACnC,MAAM,YAAY,GAAG,IAAI,CAAC,QAAQ,CAAC,OAAO,GAAG,IAAI,CAAC,QAAQ,CAAC,OAAO,CAAC;YACnE,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;gBAC/F,IAAI,CAAC,WAAW,GAAG,kBAAkB,CAAC,mCAAmC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,YAAY,CAAC,CAAC;gBACpH,OAAO,IAAI,CAAC;YACd,CAAC;YACD,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;gBAC/F,IAAI,CAAC,OAAO,GAAG,kBAAkB,CAAC,kCAAkC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,EAAE,YAAY,CAAC,CAAC;gBACnH,OAAO,IAAI,CAAC;YACd,CAAC;YACD,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;gBAC/F,IAAI,CAAC,OAAO,GAAG,kBAAkB,CAAC,kCAAkC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,EAAE,YAAY,CAAC,CAAC;gBACnH,OAAO,IAAI,CAAC;YACd,CAAC;YACD,OAAO,KAAK,CAAC;QACf,CAAC;QACD,wCAAwC;QACxC,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS;YAC5F,OAAO,KAAK,CAAC;QAEf,IAAI,IAAI,CAAC,QAAQ,EAAE,CAAC,CAAC,yBAAyB;YAC5C,IAAI,CAAC,QAAQ,GAAG,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,QAAQ,CAAC,OAAO,GAAG,kBAAkB,CAAC,gCAAgC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,CAAC,CAAC,CAAC;YAC/J,OAAO,IAAI,CAAC;QACd,CAAC;QAED,IAAI,IAAI,CAAC,QAAQ,EAAE,CAAC,CAAC,yBAAyB;YAC5C,IAAI,CAAC,QAAQ,GAAG,KAAK,CAAC,aAAa,CAAC,IAAI,CAAC,QAAQ,CAAC,OAAO,GAAG,kBAAkB,CAAC,gCAAgC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,CAAC,CAAC,CAAC;YAC/J,OAAO,IAAI,CAAC;QACd,CAAC;QACD,OAAO,KAAK,CAAC;IACf,CAAC;IACO,qBAAqB,CAAC,CAAqB,EAAE,CAAqB;QACxE,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,IAAI,CAAC;QACd,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,QAAQ,CAAC,gBAAgB,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC;QACzC,OAAO,KAAK,CAAC;IACf,CAAC;IACO,kBAAkB,CAAC,CAAoB,EAAE,CAAoB;QACnE,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,IAAI,CAAC;QACd,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,CAAC,CAAC,0BAA0B,CAAC,CAAC,CAAC,CAAC;QACzC,OAAO,KAAK,CAAC;IACf,CAAC;IAED;;OAEG;IAEI,aAAa,CAAC,KAAuC;QAC1D,IAAI,CAAC,KAAK;YACR,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,CAAC;YAC1D,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,CAAC;YAC1D,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,kBAAkB,CAAC,IAAI,CAAC,QAAQ,EAAE,KAAK,CAAC,QAAQ,CAAC;YACzD,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,kBAAkB,CAAC,IAAI,CAAC,QAAQ,EAAE,KAAK,CAAC,QAAQ,CAAC;YACzD,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,WAAW,EAAE,KAAK,CAAC,WAAW,CAAC;YAClE,OAAO,KAAK,CAAC;QACf,OAAO,IAAI,CAAC;IACd,CAAC;IACD,qDAAqD;IAC9C,gBAAgB,CAAC,CAAS;QAC/B,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS;YAC5B,IAAI,CAAC,OAAO,IAAI,CAAC,CAAC;QACpB,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS;YAC5B,IAAI,CAAC,OAAO,IAAI,CAAC,CAAC;QACpB,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS;YAChC,IAAI,CAAC,WAAW,IAAI,CAAC,CAAC;IAC1B,CAAC;IACM,MAAM,CAAC,cAAc,CAAC,CAA8C,EAAE,CAA8C;QACzH,IAAI,CAAC,KAAK,SAAS;YACjB,OAAO,CAAC,KAAK,SAAS,CAAC;QACzB,OAAO,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,CAAC;IAC5B,CAAC;CACF","sourcesContent":["/*---------------------------------------------------------------------------------------------\r\n* Copyright (c) Bentley Systems, Incorporated. All rights reserved.\r\n* See LICENSE.md in the project root for license terms and full copyright notice.\r\n*--------------------------------------------------------------------------------------------*/\r\n\r\n/** @packageDocumentation\r\n * @module Curve\r\n */\r\nimport { Geometry } from \"../../Geometry\";\r\nimport { Angle } from \"../../geometry3d/Angle\";\r\nimport { TransitionSpiral3d } from \"./TransitionSpiral3d\";\r\n// import {} from \"./\";\r\n/** A true transition spiral is a curve defined by its curvature, with the curvature function symmetric about midpoint.\r\n * * The symmetry condition creates a relationship among the following 4 quantities:\r\n * ** curvature0 = curvature (i.e. 1/radius) at start\r\n * ** curvature1 = curvature (i.e. 1/radius) at end\r\n * ** sweepRadians = signed turning angle from start to end\r\n * ** arcLength = length of curve\r\n * * The relationship is the equation\r\n * ** `sweepRadians = arcLength * average Curvature = arcLength * 0.5 * (curvature0 + curvature1)`\r\n * * That is, regardless of any curvature properties other than symmetry, specifying any 3 of the quantities fully determines the remaining one.\r\n * @public\r\n */\r\nexport class TransitionConditionalProperties {\r\n  /** radius (or 0 at start) */\r\n  public radius0: number | undefined;\r\n  /** radius (or 0) at end */\r\n  public radius1: number | undefined;\r\n  /** bearing at start, measured from x towards y */\r\n  public bearing0: Angle | undefined;\r\n  /** bearing at end, measured from x towards y */\r\n  public bearing1: Angle | undefined;\r\n  /** curve length */\r\n  public curveLength: number | undefined;\r\n  /**\r\n   * capture numeric or undefined values\r\n   * @param radius0 start radius or undefined\r\n   * @param radius1 end radius or undefined\r\n   * @param bearing0 start bearing or undefined\r\n   * @param bearing1 end bearing or undefined\r\n   * @param arcLength arc length or undefined\r\n   */\r\n  public constructor(\r\n    radius0: number | undefined,\r\n    radius1: number | undefined,\r\n    bearing0: Angle | undefined,\r\n    bearing1: Angle | undefined,\r\n    arcLength: number | undefined) {\r\n    this.radius0 = radius0;\r\n    this.radius1 = radius1;\r\n    this.bearing0 = bearing0;\r\n    this.bearing1 = bearing1;\r\n    this.curveLength = arcLength;\r\n  }\r\n  /** return the number of defined values among the 5 properties. */\r\n  public numDefinedProperties() {\r\n    return Geometry.defined01(this.radius0)\r\n      + Geometry.defined01(this.radius1)\r\n      + Geometry.defined01(this.bearing0)\r\n      + Geometry.defined01(this.bearing1)\r\n      + Geometry.defined01(this.curveLength);\r\n  }\r\n  /** clone with all properties (i.e. preserve undefined states) */\r\n  public clone(): TransitionConditionalProperties {\r\n    return new TransitionConditionalProperties(\r\n      this.radius0,\r\n      this.radius1,\r\n      this.bearing0 === undefined ? undefined : this.bearing0.clone(),\r\n      this.bearing1 === undefined ? undefined : this.bearing1.clone(),\r\n      this.curveLength);\r\n  }\r\n  /** Return true if all components are defined and agree equationally. */\r\n  public getIsValidCompleteSet() {\r\n    if (this.curveLength !== undefined && this.bearing0 !== undefined && this.bearing1 !== undefined\r\n      && this.radius0 !== undefined && this.radius1 !== undefined) {\r\n      const length1 = TransitionSpiral3d.radiusRadiusSweepRadiansToArcLength(this.radius0, this.radius1,\r\n        this.bearing1.radians - this.bearing0.radians);\r\n      return Geometry.isSameCoordinate(this.curveLength, length1);\r\n    }\r\n    return false;\r\n  }\r\n  /** Examine which properties are defined and compute the (single) undefined.\r\n   * @returns Return true if the input state had precisely one undefined member.\r\n   */\r\n  public tryResolveAnySingleUnknown(): boolean {\r\n    if (this.getIsValidCompleteSet())\r\n      return true;\r\n    if (this.bearing0 && this.bearing1) {\r\n      const sweepRadians = this.bearing1.radians - this.bearing0.radians;\r\n      if (this.curveLength === undefined && this.radius0 !== undefined && this.radius1 !== undefined) {\r\n        this.curveLength = TransitionSpiral3d.radiusRadiusSweepRadiansToArcLength(this.radius0, this.radius1, sweepRadians);\r\n        return true;\r\n      }\r\n      if (this.curveLength !== undefined && this.radius0 === undefined && this.radius1 !== undefined) {\r\n        this.radius0 = TransitionSpiral3d.radius1LengthSweepRadiansToRadius0(this.radius1, this.curveLength, sweepRadians);\r\n        return true;\r\n      }\r\n      if (this.curveLength !== undefined && this.radius0 !== undefined && this.radius1 === undefined) {\r\n        this.radius1 = TransitionSpiral3d.radius0LengthSweepRadiansToRadius1(this.radius0, this.curveLength, sweepRadians);\r\n        return true;\r\n      }\r\n      return false;\r\n    }\r\n    // at least one bearing is undefined ...\r\n    if (this.curveLength === undefined || this.radius0 === undefined || this.radius1 === undefined)\r\n      return false;\r\n\r\n    if (this.bearing0) { // bearing 1 is undefined\r\n      this.bearing1 = Angle.createRadians(this.bearing0.radians + TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength));\r\n      return true;\r\n    }\r\n\r\n    if (this.bearing1) { // bearing 0 is undefined\r\n      this.bearing0 = Angle.createRadians(this.bearing1.radians - TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength));\r\n      return true;\r\n    }\r\n    return false;\r\n  }\r\n  private almostEqualCoordinate(a: number | undefined, b: number | undefined): boolean {\r\n    if (a === undefined && b === undefined)\r\n      return true;\r\n    if (a !== undefined && b !== undefined)\r\n      return Geometry.isSameCoordinate(a, b);\r\n    return false;\r\n  }\r\n  private almostEqualBearing(a: Angle | undefined, b: Angle | undefined): boolean {\r\n    if (a === undefined && b === undefined)\r\n      return true;\r\n    if (a !== undefined && b !== undefined)\r\n      return a.isAlmostEqualNoPeriodShift(b);\r\n    return false;\r\n  }\r\n\r\n  /**\r\n   * Test if this and other have matching numeric and undefined members.\r\n   */\r\n\r\n  public isAlmostEqual(other?: TransitionConditionalProperties) {\r\n    if (!other)\r\n      return false;\r\n    if (!this.almostEqualCoordinate(this.radius0, other.radius0))\r\n      return false;\r\n    if (!this.almostEqualCoordinate(this.radius1, other.radius1))\r\n      return false;\r\n    if (!this.almostEqualBearing(this.bearing0, other.bearing0))\r\n      return false;\r\n    if (!this.almostEqualBearing(this.bearing1, other.bearing1))\r\n      return false;\r\n    if (!this.almostEqualCoordinate(this.curveLength, other.curveLength))\r\n      return false;\r\n    return true;\r\n  }\r\n  /** Apply a NONZERO scale factor to all distances. */\r\n  public applyScaleFactor(a: number) {\r\n    if (this.radius0 !== undefined)\r\n      this.radius0 *= a;\r\n    if (this.radius1 !== undefined)\r\n      this.radius1 *= a;\r\n    if (this.curveLength !== undefined)\r\n      this.curveLength *= a;\r\n  }\r\n  public static areAlmostEqual(a: TransitionConditionalProperties | undefined, b: TransitionConditionalProperties | undefined): boolean {\r\n    if (a === undefined)\r\n      return b === undefined;\r\n    return a.isAlmostEqual(b);\r\n  }\r\n}\r\n"]}
+{"version":3,"file":"TransitionConditionalProperties.js","sourceRoot":"","sources":["../../../../src/curve/spiral/TransitionConditionalProperties.ts"],"names":[],"mappings":"AAAA;;;+FAG+F;AAE/F;;GAEG;AACH,OAAO,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAC;AAC1C,OAAO,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AAC/C,OAAO,EAAE,kBAAkB,EAAE,MAAM,sBAAsB,CAAC;AAE1D;;;;;;;;;;;;GAYG;AACH,MAAM,OAAO,+BAA+B;IAC1C,8BAA8B;IACvB,OAAO,CAAqB;IACnC,4BAA4B;IACrB,OAAO,CAAqB;IACnC,mDAAmD;IAC5C,QAAQ,CAAoB;IACnC,iDAAiD;IAC1C,QAAQ,CAAoB;IACnC,oBAAoB;IACb,WAAW,CAAqB;IACvC;;;;;;;OAOG;IACH,YACE,OAA2B,EAC3B,OAA2B,EAC3B,QAA2B,EAC3B,QAA2B,EAC3B,SAA6B;QAE7B,IAAI,CAAC,OAAO,GAAG,OAAO,CAAC;QACvB,IAAI,CAAC,OAAO,GAAG,OAAO,CAAC;QACvB,IAAI,CAAC,QAAQ,GAAG,QAAQ,CAAC;QACzB,IAAI,CAAC,QAAQ,GAAG,QAAQ,CAAC;QACzB,IAAI,CAAC,WAAW,GAAG,SAAS,CAAC;IAC/B,CAAC;IACD,kEAAkE;IAC3D,oBAAoB;QACzB,OAAO,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,OAAO,CAAC;cACnC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,OAAO,CAAC;cAChC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,QAAQ,CAAC;cACjC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,QAAQ,CAAC;cACjC,QAAQ,CAAC,SAAS,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC;IAC3C,CAAC;IACD,qEAAqE;IAC9D,KAAK;QACV,OAAO,IAAI,+BAA+B,CACxC,IAAI,CAAC,OAAO,EACZ,IAAI,CAAC,OAAO,EACZ,IAAI,CAAC,QAAQ,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,EAC/D,IAAI,CAAC,QAAQ,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,EAC/D,IAAI,CAAC,WAAW,CACjB,CAAC;IACJ,CAAC;IACD,0EAA0E;IACnE,qBAAqB;QAC1B,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,QAAQ,KAAK,SAAS,IAAI,IAAI,CAAC,QAAQ,KAAK,SAAS;eAC3F,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;YAC9D,MAAM,SAAS,GAAG,kBAAkB,CAAC,mCAAmC,CACtE,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,QAAQ,CAAC,OAAO,GAAG,IAAI,CAAC,QAAQ,CAAC,OAAO,CAC1E,CAAC;YACF,OAAO,QAAQ,CAAC,gBAAgB,CAAC,IAAI,CAAC,WAAW,EAAE,SAAS,CAAC,CAAC;QAChE,CAAC;QACD,OAAO,KAAK,CAAC;IACf,CAAC;IACD;;;OAGG;IACI,0BAA0B;QAC/B,IAAI,IAAI,CAAC,qBAAqB,EAAE;YAC9B,OAAO,IAAI,CAAC;QACd,IAAI,IAAI,CAAC,QAAQ,IAAI,IAAI,CAAC,QAAQ,EAAE,CAAC;YACnC,MAAM,YAAY,GAAG,IAAI,CAAC,QAAQ,CAAC,OAAO,GAAG,IAAI,CAAC,QAAQ,CAAC,OAAO,CAAC;YACnE,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;gBAC/F,IAAI,CAAC,WAAW,GAAG,kBAAkB,CAAC,mCAAmC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,YAAY,CAAC,CAAC;gBACpH,OAAO,IAAI,CAAC;YACd,CAAC;YACD,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;gBAC/F,IAAI,CAAC,OAAO,GAAG,kBAAkB,CAAC,kCAAkC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,EAAE,YAAY,CAAC,CAAC;gBACnH,OAAO,IAAI,CAAC;YACd,CAAC;YACD,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,EAAE,CAAC;gBAC/F,IAAI,CAAC,OAAO,GAAG,kBAAkB,CAAC,kCAAkC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,EAAE,YAAY,CAAC,CAAC;gBACnH,OAAO,IAAI,CAAC;YACd,CAAC;YACD,OAAO,KAAK,CAAC;QACf,CAAC;QACD,oCAAoC;QACpC,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS;YAC5F,OAAO,KAAK,CAAC;QACf,IAAI,IAAI,CAAC,QAAQ,EAAE,CAAC,CAAC,yBAAyB;YAC5C,IAAI,CAAC,QAAQ,GAAG,KAAK,CAAC,aAAa,CACjC,IAAI,CAAC,QAAQ,CAAC,OAAO;gBACrB,kBAAkB,CAAC,gCAAgC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,CAAC,CAClG,CAAC;YACF,OAAO,IAAI,CAAC;QACd,CAAC;QACD,IAAI,IAAI,CAAC,QAAQ,EAAE,CAAC,CAAC,yBAAyB;YAC5C,IAAI,CAAC,QAAQ,GAAG,KAAK,CAAC,aAAa,CACjC,IAAI,CAAC,QAAQ,CAAC,OAAO;gBACrB,kBAAkB,CAAC,gCAAgC,CAAC,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,OAAO,EAAE,IAAI,CAAC,WAAW,CAAC,CAClG,CAAC;YACF,OAAO,IAAI,CAAC;QACd,CAAC;QACD,OAAO,KAAK,CAAC;IACf,CAAC;IACO,qBAAqB,CAAC,CAAqB,EAAE,CAAqB;QACxE,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,IAAI,CAAC;QACd,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,QAAQ,CAAC,gBAAgB,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC;QACzC,OAAO,KAAK,CAAC;IACf,CAAC;IACO,kBAAkB,CAAC,CAAoB,EAAE,CAAoB;QACnE,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,IAAI,CAAC;QACd,IAAI,CAAC,KAAK,SAAS,IAAI,CAAC,KAAK,SAAS;YACpC,OAAO,CAAC,CAAC,0BAA0B,CAAC,CAAC,CAAC,CAAC;QACzC,OAAO,KAAK,CAAC;IACf,CAAC;IACD,8EAA8E;IACvE,aAAa,CAAC,KAAuC;QAC1D,IAAI,CAAC,KAAK;YACR,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,CAAC;YAC1D,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,OAAO,EAAE,KAAK,CAAC,OAAO,CAAC;YAC1D,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,kBAAkB,CAAC,IAAI,CAAC,QAAQ,EAAE,KAAK,CAAC,QAAQ,CAAC;YACzD,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,kBAAkB,CAAC,IAAI,CAAC,QAAQ,EAAE,KAAK,CAAC,QAAQ,CAAC;YACzD,OAAO,KAAK,CAAC;QACf,IAAI,CAAC,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,WAAW,EAAE,KAAK,CAAC,WAAW,CAAC;YAClE,OAAO,KAAK,CAAC;QACf,OAAO,IAAI,CAAC;IACd,CAAC;IACD,iFAAiF;IAC1E,gBAAgB,CAAC,CAAS;QAC/B,IAAI,CAAC,KAAK,CAAC;YACT,OAAO;QACT,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS;YAC5B,IAAI,CAAC,OAAO,IAAI,CAAC,CAAC;QACpB,IAAI,IAAI,CAAC,OAAO,KAAK,SAAS;YAC5B,IAAI,CAAC,OAAO,IAAI,CAAC,CAAC;QACpB,IAAI,IAAI,CAAC,WAAW,KAAK,SAAS;YAChC,IAAI,CAAC,WAAW,IAAI,CAAC,CAAC;IAC1B,CAAC;IACD,uEAAuE;IAChE,MAAM,CAAC,cAAc,CAC1B,CAA8C,EAAE,CAA8C;QAE9F,IAAI,CAAC,KAAK,SAAS;YACjB,OAAO,CAAC,KAAK,SAAS,CAAC;QACzB,OAAO,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,CAAC;IAC5B,CAAC;CACF","sourcesContent":["/*---------------------------------------------------------------------------------------------\n* Copyright (c) Bentley Systems, Incorporated. All rights reserved.\n* See LICENSE.md in the project root for license terms and full copyright notice.\n*--------------------------------------------------------------------------------------------*/\n\n/** @packageDocumentation\n * @module Curve\n */\nimport { Geometry } from \"../../Geometry\";\nimport { Angle } from \"../../geometry3d/Angle\";\nimport { TransitionSpiral3d } from \"./TransitionSpiral3d\";\n\n/**\n * A true transition spiral is a curve defined by its curvature, with the curvature function symmetric about midpoint.\n * * The symmetry condition creates a relationship among the following 4 quantities:\n * ** curvature0 = curvature (i.e. 1/radius) at start\n * ** curvature1 = curvature (i.e. 1/radius) at end\n * ** sweepRadians = signed turning angle from start to end\n * ** arcLength = length of curve\n * * The relationship is the equation:\n * ** `sweepRadians = arcLength * average Curvature = arcLength * 0.5 * (curvature0 + curvature1)`\n * * That is, regardless of any curvature properties other than symmetry, specifying any 3 of the quantities fully\n * determines the remaining one.\n * @public\n */\nexport class TransitionConditionalProperties {\n  /** Radius (or 0 at start). */\n  public radius0: number | undefined;\n  /** Radius (or 0) at end. */\n  public radius1: number | undefined;\n  /** Bearing at start, measured from x towards y. */\n  public bearing0: Angle | undefined;\n  /** Bearing at end, measured from x towards y. */\n  public bearing1: Angle | undefined;\n  /** Curve length. */\n  public curveLength: number | undefined;\n  /**\n   * Capture numeric or undefined values.\n   * @param radius0 start radius or undefined.\n   * @param radius1 end radius or undefined.\n   * @param bearing0 start bearing or undefined.\n   * @param bearing1 end bearing or undefined.\n   * @param arcLength arc length or undefined.\n   */\n  public constructor(\n    radius0: number | undefined,\n    radius1: number | undefined,\n    bearing0: Angle | undefined,\n    bearing1: Angle | undefined,\n    arcLength: number | undefined,\n  ) {\n    this.radius0 = radius0;\n    this.radius1 = radius1;\n    this.bearing0 = bearing0;\n    this.bearing1 = bearing1;\n    this.curveLength = arcLength;\n  }\n  /** Return the number of defined values among the 5 properties. */\n  public numDefinedProperties() {\n    return Geometry.defined01(this.radius0)\n      + Geometry.defined01(this.radius1)\n      + Geometry.defined01(this.bearing0)\n      + Geometry.defined01(this.bearing1)\n      + Geometry.defined01(this.curveLength);\n  }\n  /** Clone with all 5 properties (i.e., preserve undefined states). */\n  public clone(): TransitionConditionalProperties {\n    return new TransitionConditionalProperties(\n      this.radius0,\n      this.radius1,\n      this.bearing0 === undefined ? undefined : this.bearing0.clone(),\n      this.bearing1 === undefined ? undefined : this.bearing1.clone(),\n      this.curveLength,\n    );\n  }\n  /** Return true if all 5 properties are defined and agree equationally. */\n  public getIsValidCompleteSet(): boolean {\n    if (this.curveLength !== undefined && this.bearing0 !== undefined && this.bearing1 !== undefined\n      && this.radius0 !== undefined && this.radius1 !== undefined) {\n      const arcLength = TransitionSpiral3d.radiusRadiusSweepRadiansToArcLength(\n        this.radius0, this.radius1, this.bearing1.radians - this.bearing0.radians,\n      );\n      return Geometry.isSameCoordinate(this.curveLength, arcLength);\n    }\n    return false;\n  }\n  /**\n   * Examine which properties are defined and compute the (single) undefined.\n   * @returns true if the input state had precisely one undefined member.\n   */\n  public tryResolveAnySingleUnknown(): boolean {\n    if (this.getIsValidCompleteSet())\n      return true;\n    if (this.bearing0 && this.bearing1) {\n      const sweepRadians = this.bearing1.radians - this.bearing0.radians;\n      if (this.curveLength === undefined && this.radius0 !== undefined && this.radius1 !== undefined) {\n        this.curveLength = TransitionSpiral3d.radiusRadiusSweepRadiansToArcLength(this.radius0, this.radius1, sweepRadians);\n        return true;\n      }\n      if (this.curveLength !== undefined && this.radius0 === undefined && this.radius1 !== undefined) {\n        this.radius0 = TransitionSpiral3d.radius1LengthSweepRadiansToRadius0(this.radius1, this.curveLength, sweepRadians);\n        return true;\n      }\n      if (this.curveLength !== undefined && this.radius0 !== undefined && this.radius1 === undefined) {\n        this.radius1 = TransitionSpiral3d.radius0LengthSweepRadiansToRadius1(this.radius0, this.curveLength, sweepRadians);\n        return true;\n      }\n      return false;\n    }\n    // at least one bearing is undefined\n    if (this.curveLength === undefined || this.radius0 === undefined || this.radius1 === undefined)\n      return false;\n    if (this.bearing0) { // bearing 1 is undefined\n      this.bearing1 = Angle.createRadians(\n        this.bearing0.radians +\n        TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength),\n      );\n      return true;\n    }\n    if (this.bearing1) { // bearing 0 is undefined\n      this.bearing0 = Angle.createRadians(\n        this.bearing1.radians -\n        TransitionSpiral3d.radiusRadiusLengthToSweepRadians(this.radius0, this.radius1, this.curveLength),\n      );\n      return true;\n    }\n    return false;\n  }\n  private almostEqualCoordinate(a: number | undefined, b: number | undefined): boolean {\n    if (a === undefined && b === undefined)\n      return true;\n    if (a !== undefined && b !== undefined)\n      return Geometry.isSameCoordinate(a, b);\n    return false;\n  }\n  private almostEqualBearing(a: Angle | undefined, b: Angle | undefined): boolean {\n    if (a === undefined && b === undefined)\n      return true;\n    if (a !== undefined && b !== undefined)\n      return a.isAlmostEqualNoPeriodShift(b);\n    return false;\n  }\n  /** Test if `this` and `other` have matching numeric and undefined members. */\n  public isAlmostEqual(other?: TransitionConditionalProperties): boolean {\n    if (!other)\n      return false;\n    if (!this.almostEqualCoordinate(this.radius0, other.radius0))\n      return false;\n    if (!this.almostEqualCoordinate(this.radius1, other.radius1))\n      return false;\n    if (!this.almostEqualBearing(this.bearing0, other.bearing0))\n      return false;\n    if (!this.almostEqualBearing(this.bearing1, other.bearing1))\n      return false;\n    if (!this.almostEqualCoordinate(this.curveLength, other.curveLength))\n      return false;\n    return true;\n  }\n  /** Apply a NONZERO scale factor to all distances. If `a` is zero, do nothing. */\n  public applyScaleFactor(a: number): void {\n    if (a === 0)\n      return;\n    if (this.radius0 !== undefined)\n      this.radius0 *= a;\n    if (this.radius1 !== undefined)\n      this.radius1 *= a;\n    if (this.curveLength !== undefined)\n      this.curveLength *= a;\n  }\n  /** Test if `a` and `b` have matching numeric and undefined members. */\n  public static areAlmostEqual(\n    a: TransitionConditionalProperties | undefined, b: TransitionConditionalProperties | undefined,\n  ): boolean {\n    if (a === undefined)\n      return b === undefined;\n    return a.isAlmostEqual(b);\n  }\n}\n"]}

package/lib/esm/curve/spiral/TransitionSpiral3d.d.ts

@@ -13,12 +13,13 @@ import { TransitionConditionalProperties } from "./TransitionConditionalProperti
 import type { Vector3d } from "../../geometry3d/Point3dVector3d";
 import type { Ray3d } from "../../geometry3d/Ray3d";
 /**
- * This is the set of valid type names for "integrated" spirals
+ * This is the set of valid type names for "integrated" spirals.
  * * Behavior is expressed by a `NormalizedTransition` snap function.
- * * The snap function varies smoothly from f(0)=0 to f(1)=1
+ * * The snap function varies smoothly from f(0)=0 to f(1)=1.
  * * The various snap functions are:
  *   * clothoid: linear
- *   * biquadratic: 2 quadratics pieced together, joining with 1st derivative continuity at f(0.) = 0.5, with zero slope f'(0)=0 and f'(1)= 0
+ *   * biquadratic: 2 quadratics pieced together, joining with 1st derivative continuity at f(0.) = 0.5, with zero
+ *     slope f'(0)=0 and f'(1)= 0
  *   * bloss: A single cubic with zero slope at 0 and 1
  *   * cosine: half of a cosine wave, centered around 0.5
  *   * sine: full period of a sine wave added to the line f(u)=u
@@ -35,59 +36,63 @@ export type DirectSpiralTypeName = "JapaneseCubic" | "Arema" | "ChineseCubic" |
 /**
  * TransitionSpiral3d is a base class for multiple variants of spirals.
  * * The menagerie of spiral types have 2 broad categories:
- *   * IntegratedSpiral3d -- a spiral whose direct function for curvature versus distance must be integrated to determine x,y
- *     * The IntegratedSpiral3d types are enumerated in `IntegratedSpiralTypes`
+ *   * IntegratedSpiral3d -- a spiral whose direct function for curvature versus distance must be integrated to
+ * determine x,y.
+ *     * The IntegratedSpiral3d types are enumerated in `IntegratedSpiralTypes`.
  *   * DirectSpiral3d -- a spiral implemented with direct calculation of x,y from fractional position along the spiral.
- *     * The direct spiral types are enumerated in the `DirectSpiralType`
- * * The method set for CurvePrimitive support includes a `handleTransitionSpiral(g: TransitionSpiral3d)` which receives all the spiral types.
+ *     * The direct spiral types are enumerated in the `DirectSpiralType`.
+ * * The method set for CurvePrimitive support includes a `handleTransitionSpiral(g: TransitionSpiral3d)` which receives
+ * all the spiral types.
  * * The spiral class may impose expectations that its inflection is at the origin, with tangent along the x axis.
  *   * This is generally necessary for direct spirals.
  *   * This is not necessary for integrated spirals.
  * @public
  */
 export declare abstract class TransitionSpiral3d extends CurvePrimitive {
-    /** string name of spiral type */
+    /** String name of spiral type. */
     protected _spiralType: string;
     /** Original defining properties. */
     protected _designProperties: TransitionConditionalProperties | undefined;
-    /** Fractional interval for the "active" part of a containing spiral.
-     * (The radius, angle, and length conditions define a complete spiral, and some portion of it is "active")
+    /** Placement transform. */
+    protected _localToWorld: Transform;
+    /**
+     * Fractional interval for the "active" part of a containing spiral.
+     * (the radius, angle, and length conditions define a complete spiral, and some portion of it is "active")
      */
     protected _activeFractionInterval: Segment1d;
     /** Return (reference to) the active portion of the reference spiral. */
     get activeFractionInterval(): Segment1d;
-    /** strokes in the active portion */
+    /** Strokes in the active portion. */
     abstract get activeStrokes(): LineString3d;
-    /** Placement transform */
-    protected _localToWorld: Transform;
-    /** (reference to) placement transform. */
+    /** (Reference to) placement transform. */
     get localToWorld(): Transform;
     protected constructor(spiralType: string | undefined, localToWorld: Transform, activeFractionInterval: Segment1d | undefined, designProperties: TransitionConditionalProperties | undefined);
     get spiralType(): string;
-    /** Return 1/r with convention that if true zero is given as radius it represents infinite radius (0 curvature, straight line) */
+    /** Return 1/r with convention that exact zero input returns 0 (straight line, zero curvature, infinite radius). */
     static radiusToCurvature(radius: number): number;
-    /** Return 1/k with convention that if near-zero is given as curvature, its infinite radius is returned as 0 */
+    /** Return 1/k with convention that near-zero input returns 0 (straight line, zero curvature, infinite radius). */
     static curvatureToRadius(curvature: number): number;
     /** Return a deep clone. */
     abstract clone(): TransitionSpiral3d;
-    /** Recompute strokes */
+    /** Recompute strokes. */
     abstract refreshComputedProperties(): void;
     /** Return (if possible) a spiral which is a portion of this curve. */
     clonePartialCurve(fractionA: number, fractionB: number): TransitionSpiral3d;
-    /** Clone with a transform applied  */
+    /** Clone with a transform applied.  */
     cloneTransformed(transform: Transform): TransitionSpiral3d;
     /** Return the average of the start and end curvatures. */
     static averageCurvature(radiusLimits: Segment1d): number;
     /**
-     * Given two radii (or zeros for 0 curvature) return the average curvature
-     * @param r0 start radius, or 0 for line
-     * @param r1 end radius, or 0 for line
+     * Given two radii (or zeros for 0 curvature) return the average curvature.
+     * @param r0 start radius, or 0 for line.
+     * @param r1 end radius, or 0 for line.
      */
     static averageCurvatureR0R1(r0: number, r1: number): number;
     /**
-     * Given two radii (or zeros for 0 curvature) return the average curvature
-     * @param r0 start radius, or 0 for line
-     * @param r1 end radius, or 0 for line
+     * Given two radii (or zeros for 0 curvature) return the curvature at the given fraction.
+     * @param r0 start radius, or 0 for line.
+     * @param fraction fractional position between the curvatures defined by r0 and r1.
+     * @param r1 end radius, or 0 for line.
      */
     static interpolateCurvatureR0R1(r0: number, fraction: number, r1: number): number;
     /** Return the arc length of a transition spiral with given sweep and radius pair. */
@@ -101,7 +106,8 @@ export declare abstract class TransitionSpiral3d extends CurvePrimitive {
     /** Return the original defining properties (if any) saved by the constructor. */
     get designProperties(): TransitionConditionalProperties | undefined;
     /**
-     * * If transformA is rigid with uniform scale, apply the rigid part of transformA to the localToWorld transform and return the scale and rigid separation.
+     * * If transformA is rigid with uniform scale, apply the rigid part of transformA to the localToWorld transform and
+     * return the scale and rigid separation.
      * * If not rigid, do nothing and return undefined.
      * * Also apply the scale factor to the designProperties.
      * @param transformA
@@ -112,21 +118,25 @@ export declare abstract class TransitionSpiral3d extends CurvePrimitive {
     } | undefined;
     /**
      * Construct an offset of the instance curve as viewed in the xy-plane (ignoring z).
-     * * No attempt is made to join the offsets of smaller constituent primitives. To construct a fully joined offset
-     *   for an aggregate instance (e.g., LineString3d, CurveChainWithDistanceIndex), use RegionOps.constructCurveXYOffset() instead.
-     * @param offsetDistanceOrOptions offset distance (positive to left of the instance curve), or options object
+     * * No attempt is made to join the offsets of smaller constituent primitives. To construct a fully joined offset for an
+     * aggregate instance (e.g., LineString3d, CurveChainWithDistanceIndex), use RegionOps.constructCurveXYOffset() instead.
+     * @param offsetDistanceOrOptions offset distance (positive to left of the instance curve), or options object.
      */
     constructOffsetXY(offsetDistanceOrOptions: number | OffsetOptions): BSplineCurve3d | undefined;
-    /** extend the range by the strokes of the spiral */
+    /** Extend the range by the strokes of the spiral. */
     extendRange(rangeToExtend: Range3d, transform?: Transform): void;
-    /** return the range of spiral between fractions of the activeStrokes.
-     * * Use activeStrokes point count times interval factor for initial evaluation count, but do at least 5
+    /**
+     * Return the range of spiral between fractions of the activeStrokes.
+     * * Use activeStrokes point count times interval factor for initial evaluation count, but do at least 5.
      */
     rangeBetweenFractions(fractionA: number, fractionB: number, transform?: Transform): Range3d;
-    /** Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection.
+    /**
+     * Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of
+     * projection.
      * @param ray ray onto which the instance is projected. A `Vector3d` is treated as a `Ray3d` with zero origin.
      * @param lowHigh optional receiver for output
-     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the end of the ray.
+     * @returns range of fractional projection parameters onto the ray, where 0.0 is start of the ray and 1.0 is the
+     * end of the ray.
      */
     projectedParameterRange(ray: Vector3d | Ray3d, lowHigh?: Range1d): Range1d | undefined;
 }

package/lib/esm/curve/spiral/TransitionSpiral3d.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"TransitionSpiral3d.d.ts","sourceRoot":"","sources":["../../../../src/curve/spiral/TransitionSpiral3d.ts"],"names":[],"mappings":"AAKA;;GAEG;AAEH,OAAO,EAAE,cAAc,EAAE,MAAM,4BAA4B,CAAC;AAE5D,OAAO,EAAE,QAAQ,EAAE,MAAM,2BAA2B,CAAC;AACrD,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,wBAAwB,CAAC;AAC1D,OAAO,EAAE,SAAS,EAAE,MAAM,4BAA4B,CAAC;AACvD,OAAO,EAAE,SAAS,EAAE,MAAM,4BAA4B,CAAC;AACvD,OAAO,EAAE,cAAc,EAAE,MAAM,mBAAmB,CAAC;AAGnD,OAAO,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,kBAAkB,CAAC;AACjD,OAAO,EAAE,+BAA+B,EAAE,MAAM,mCAAmC,CAAC;AAEpF,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,kCAAkC,CAAC;AACjE,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AACpD;;;;;;;;;;;;GAYG;AACH,MAAM,MAAM,wBAAwB,GAAG,UAAU,GAAG,OAAO,GAAG,aAAa,GAAG,QAAQ,GAAG,MAAM,CAAC;AAEhG;;;;GAIG;AACH,MAAM,MAAM,oBAAoB,GAC7B,eAAe,GACd,OAAO,GACP,cAAc,GACd,YAAY,GACZ,oBAAoB,GACpB,mBAAmB,GACnB,OAAO,GACP,iBAAiB,GACjB,QAAQ,GACR,SAAS,CACV;AAEH;;;;;;;;;;;;GAYG;AACH,8BAAsB,kBAAmB,SAAQ,cAAc;IAC7D,iCAAiC;IACjC,SAAS,CAAC,WAAW,EAAE,MAAM,CAAC;IAC9B,oCAAoC;IACpC,SAAS,CAAC,iBAAiB,EAAE,+BAA+B,GAAG,SAAS,CAAC;IAEzE;;OAEG;IACH,SAAS,CAAC,uBAAuB,EAAE,SAAS,CAAC;IAC7C,wEAAwE;IACxE,IAAW,sBAAsB,IAAI,SAAS,CAAyC;IACvF,oCAAoC;IACpC,aAAoB,aAAa,IAAI,YAAY,CAAC;IAClD,0BAA0B;IAC1B,SAAS,CAAC,aAAa,EAAE,SAAS,CAAC;IACnC,0CAA0C;IAC1C,IAAW,YAAY,IAAI,SAAS,CAA+B;IAEnE,SAAS,aAAa,UAAU,EAAE,MAAM,GAAG,SAAS,EAAE,YAAY,EAAE,SAAS,EAAE,sBAAsB,EAAE,SAAS,GAAG,SAAS,EAAE,gBAAgB,EAAE,+BAA+B,GAAG,SAAS;IAQ3L,IAAW,UAAU,IAAI,MAAM,CAA6B;IAC5D,iIAAiI;WACnH,iBAAiB,CAAC,MAAM,EAAE,MAAM,GAAG,MAAM;IAEvD,+GAA+G;WACjG,iBAAiB,CAAC,SAAS,EAAE,MAAM,GAAG,MAAM;IAM1D,2BAA2B;aACF,KAAK,IAAI,kBAAkB;IAEpD,wBAAwB;aACR,yBAAyB,IAAI,IAAI;IAEjD,sEAAsE;IACtD,iBAAiB,CAAC,SAAS,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,GAAG,kBAAkB;IAS3F,sCAAsC;IACtB,gBAAgB,CAAC,SAAS,EAAE,SAAS,GAAG,kBAAkB;IAM1E,0DAA0D;WAC5C,gBAAgB,CAAC,YAAY,EAAE,SAAS,GAAG,MAAM;IAG/D;;;;OAIG;WACW,oBAAoB,CAAC,EAAE,EAAE,MAAM,EAAE,EAAE,EAAE,MAAM,GAAG,MAAM;IAGlE;;;;OAIG;WACW,wBAAwB,CAAC,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,EAAE,EAAE,MAAM,GAAG,MAAM;IAIxF,qFAAqF;WACvE,mCAAmC,CAAC,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,YAAY,EAAE,MAAM,GAAG,MAAM;IAIjH,yEAAyE;WAC3D,gCAAgC,CAAC,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,GAAG,MAAM;IAI3G,sFAAsF;WACxE,kCAAkC,CAAC,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,YAAY,EAAE,MAAM;IAGzG,sFAAsF;WACxE,kCAAkC,CAAC,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,YAAY,EAAE,MAAM;IAGzG,iFAAiF;IACjF,IAAW,gBAAgB,IAAI,+BAA+B,GAAG,SAAS,CAAmC;IAC7G;;;;;OAKG;IACH,SAAS,CAAC,yBAAyB,CAAC,UAAU,EAAE,SAAS,GAAG;QAAE,SAAS,EAAE,QAAQ,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,GAAG,SAAS;IAiB9G;;;;;OAKG;IACa,iBAAiB,CAAC,uBAAuB,EAAE,MAAM,GAAG,aAAa,GAAG,cAAc,GAAG,SAAS;IAM9G,oDAAoD;IACpC,WAAW,CAAC,aAAa,EAAE,OAAO,EAAE,SAAS,CAAC,EAAE,SAAS,GAAG,IAAI;IAKhF;;OAEG;IACc,qBAAqB,CAAC,SAAS,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,SAAS,CAAC,EAAE,SAAS,GAAG,OAAO;IAQ5G;;;;OAIG;IACa,uBAAuB,CAAC,GAAG,EAAE,QAAQ,GAAG,KAAK,EAAE,OAAO,CAAC,EAAE,OAAO,GAAG,OAAO,GAAG,SAAS;CAGvG"}
+{"version":3,"file":"TransitionSpiral3d.d.ts","sourceRoot":"","sources":["../../../../src/curve/spiral/TransitionSpiral3d.ts"],"names":[],"mappings":"AAKA;;GAEG;AAEH,OAAO,EAAE,cAAc,EAAE,MAAM,4BAA4B,CAAC;AAE5D,OAAO,EAAE,QAAQ,EAAE,MAAM,2BAA2B,CAAC;AACrD,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,wBAAwB,CAAC;AAC1D,OAAO,EAAE,SAAS,EAAE,MAAM,4BAA4B,CAAC;AACvD,OAAO,EAAE,SAAS,EAAE,MAAM,4BAA4B,CAAC;AACvD,OAAO,EAAE,cAAc,EAAE,MAAM,mBAAmB,CAAC;AAGnD,OAAO,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,kBAAkB,CAAC;AACjD,OAAO,EAAE,+BAA+B,EAAE,MAAM,mCAAmC,CAAC;AAEpF,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,kCAAkC,CAAC;AACjE,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,wBAAwB,CAAC;AACpD;;;;;;;;;;;;;GAaG;AACH,MAAM,MAAM,wBAAwB,GAAG,UAAU,GAAG,OAAO,GAAG,aAAa,GAAG,QAAQ,GAAG,MAAM,CAAC;AAEhG;;;;GAIG;AACH,MAAM,MAAM,oBAAoB,GAC9B,eAAe,GACb,OAAO,GACP,cAAc,GACd,YAAY,GACZ,oBAAoB,GACpB,mBAAmB,GACnB,OAAO,GACP,iBAAiB,GACjB,QAAQ,GACR,SAAS,CACV;AAEH;;;;;;;;;;;;;;GAcG;AACH,8BAAsB,kBAAmB,SAAQ,cAAc;IAC7D,kCAAkC;IAClC,SAAS,CAAC,WAAW,EAAE,MAAM,CAAC;IAC9B,oCAAoC;IACpC,SAAS,CAAC,iBAAiB,EAAE,+BAA+B,GAAG,SAAS,CAAC;IACzE,2BAA2B;IAC3B,SAAS,CAAC,aAAa,EAAE,SAAS,CAAC;IACnC;;;OAGG;IACH,SAAS,CAAC,uBAAuB,EAAE,SAAS,CAAC;IAC7C,wEAAwE;IACxE,IAAW,sBAAsB,IAAI,SAAS,CAE7C;IACD,qCAAqC;IACrC,aAAoB,aAAa,IAAI,YAAY,CAAC;IAClD,0CAA0C;IAC1C,IAAW,YAAY,IAAI,SAAS,CAEnC;IACD,SAAS,aACP,UAAU,EAAE,MAAM,GAAG,SAAS,EAC9B,YAAY,EAAE,SAAS,EACvB,sBAAsB,EAAE,SAAS,GAAG,SAAS,EAC7C,gBAAgB,EAAE,+BAA+B,GAAG,SAAS;IAQ/D,IAAW,UAAU,IAAI,MAAM,CAE9B;IACD,mHAAmH;WACrG,iBAAiB,CAAC,MAAM,EAAE,MAAM,GAAG,MAAM;IAGvD,kHAAkH;WACpG,iBAAiB,CAAC,SAAS,EAAE,MAAM,GAAG,MAAM;IAK1D,2BAA2B;aACF,KAAK,IAAI,kBAAkB;IACpD,yBAAyB;aACT,yBAAyB,IAAI,IAAI;IACjD,sEAAsE;IACtD,iBAAiB,CAAC,SAAS,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,GAAG,kBAAkB;IAQ3F,uCAAuC;IACvB,gBAAgB,CAAC,SAAS,EAAE,SAAS,GAAG,kBAAkB;IAK1E,0DAA0D;WAC5C,gBAAgB,CAAC,YAAY,EAAE,SAAS,GAAG,MAAM;IAG/D;;;;OAIG;WACW,oBAAoB,CAAC,EAAE,EAAE,MAAM,EAAE,EAAE,EAAE,MAAM,GAAG,MAAM;IAGlE;;;;;OAKG;WACW,wBAAwB,CAAC,EAAE,EAAE,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,EAAE,EAAE,MAAM,GAAG,MAAM;IAGxF,qFAAqF;WACvE,mCAAmC,CAAC,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,YAAY,EAAE,MAAM,GAAG,MAAM;IAGjH,yEAAyE;WAC3D,gCAAgC,CAAC,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,GAAG,MAAM;IAG3G,sFAAsF;WACxE,kCAAkC,CAAC,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,YAAY,EAAE,MAAM;IAKzG,sFAAsF;WACxE,kCAAkC,CAAC,OAAO,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,YAAY,EAAE,MAAM;IAKzG,iFAAiF;IACjF,IAAW,gBAAgB,IAAI,+BAA+B,GAAG,SAAS,CAEzE;IACD;;;;;;OAMG;IACH,SAAS,CAAC,yBAAyB,CAAC,UAAU,EAAE,SAAS,GAAG;QAAE,SAAS,EAAE,QAAQ,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,GAAG,SAAS;IAe9G;;;;;OAKG;IACa,iBAAiB,CAAC,uBAAuB,EAAE,MAAM,GAAG,aAAa,GAAG,cAAc,GAAG,SAAS;IAM9G,qDAAqD;IACrC,WAAW,CAAC,aAAa,EAAE,OAAO,EAAE,SAAS,CAAC,EAAE,SAAS,GAAG,IAAI;IAGhF;;;OAGG;IACa,qBAAqB,CAAC,SAAS,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,SAAS,CAAC,EAAE,SAAS,GAAG,OAAO;IAQ3G;;;;;;;OAOG;IACa,uBAAuB,CAAC,GAAG,EAAE,QAAQ,GAAG,KAAK,EAAE,OAAO,CAAC,EAAE,OAAO,GAAG,OAAO,GAAG,SAAS;CAGvG"}