@itwin/core-common 4.0.0-dev.1 → 4.0.0-dev.100

package/lib/cjs/QPoint.d.ts

@@ -1,480 +1,480 @@
-/** @packageDocumentation
- * @module Geometry
- */
-import { Uint16ArrayBuilder } from "@itwin/core-bentley";
-import { Point2d, Point3d, Range2d, Range3d, Vector2d, Vector3d, XAndY, XYAndZ } from "@itwin/core-geometry";
-/**
- * Provides facilities for quantizing floating point values within a specified range into 16-bit unsigned integers.
- * This is a lossy compression technique.
- * Given a floating point range [min, max], a floating point value `x` within that range is quantized by subtracting
- * `min`, scaling the result according to `max`, and truncating the result to an integer.
- * Therefore min quantizes to 0, max to 0xffff, (min+max)/2 to 0x7fff, and so on.
- * These routines are chiefly used by classes like [[QPoint2d]] and [[QPoint3d]] to reduce the space required to store
- * coordinate values for [RenderGraphic]($frontend)s.
- * @public
- * @extensions
- */
-export declare namespace Quantization {
-    const rangeScale16 = 65535;
-    const rangeScale8 = 255;
-    /** Compute the scale factor required to quantize `extent` to `rangeScale` discrete values. */
-    function computeScale(extent: number, rangeScale?: number): number;
-    /** @internal */
-    function isInRange(qpos: number, rangeScale?: number): boolean;
-    /** Return `pos` quantized to the range [`origin`, `origin + rangeScale`].
-     * @see [[Quantization.unquantize]] for the inverse operation.
-     */
-    function quantize(pos: number, origin: number, scale: number, rangeScale?: number): number;
-    /** @internal */
-    function isQuantizable(pos: number, origin: number, scale: number, rangeScale?: number): boolean;
-    /** Give `qpos` quantized to the range [`origin`, `origin + rangeScale`], return the unquantized value.
-     * @see [[Quantization.quantize]] for the inverse operation.
-     */
-    function unquantize(qpos: number, origin: number, scale: number): number;
-    /** @internal */
-    function isQuantized(qpos: number): boolean;
-}
-/** Parameters used for [[Quantization]] of 2d points such that the `x` and `y` components are each quantized to 16-bit unsigned integers.
- * @see [[QPoint2d]] for the quantized representation of a [Point2d]($core-geometry).
- * @see [[QPoint2dList]] for a list of [[QPoint2d]]s quantized using a [[QParams2d]].
- * @public
- * @extensions
- */
-export declare class QParams2d {
-    /** The origin of the quantization range. */
-    readonly origin: Point2d;
-    /** The scale applied to coordinates to quantize them. */
-    readonly scale: Point2d;
-    private constructor();
-    private setFrom;
-    /** Set [[origin]] and [[scale]] from `src`. */
-    copyFrom(src: QParams2d): void;
-    /** Create a copy of these params.
-     * @param out If supplied, these QParams2d will be modified and returned; otherwise a new QParams2d object will be created and returned.
-     */
-    clone(out?: QParams2d): QParams2d;
-    /** Initialize these parameters to support quantization of values within the specified range. */
-    setFromRange(range: Range2d, rangeScale?: number): void;
-    /** Create parameters to support quantization of values within the specified range. */
-    static fromRange(range: Range2d, out?: QParams2d, rangeScale?: number): QParams2d;
-    /** Return the unquantized point for the input `x` and `y` components. If `out` is supplied, it will be modified to hold the result and returned. */
-    unquantize(x: number, y: number, out?: Point2d): Point2d;
-    /** Creates parameters supporting quantization of values within the range [-1.0, 1.0], appropriate for normalized 2d vectors. */
-    static fromNormalizedRange(rangeScale?: number): QParams2d;
-    /** Create parameters supporting quantization of values within the range [0.0, 1.0]. */
-    static fromZeroToOne(rangeScale?: number): QParams2d;
-    /** Create parameters from origin and scale components */
-    static fromOriginAndScale(originX: number, originY: number, scaleX: number, scaleY: number): QParams2d;
-    /** @internal */
-    get rangeDiagonal(): Vector2d;
-    /** Return true if the point point is quantizable using these parameters. */
-    isQuantizable(point: Point2d): boolean;
-}
-/** Represents a [Point2d]($core-geometry) compressed such that each component `x` and `y` is quantized to the 16-bit integer range [0, 0xffff].
- * These are primarily used to reduce the space required for coordinates used by [RenderGraphic]($frontend)s.
- * @see [[QParams2d]] to define quantization parameters for a range of points.
- * @see [[QPoint2dList]] for a list of points all quantized to the same range.
- * @public
- * @extensions
- */
-export declare class QPoint2d {
-    private _x;
-    private _y;
-    /** The quantized x component. */
-    get x(): number;
-    set x(x: number);
-    /** The quantized y component. */
-    get y(): number;
-    set y(y: number);
-    /** Construct with `x` and `y` initialized to zero. */
-    constructor();
-    /** Initialize this point by quantizing the supplied { x, y } using the specified params */
-    init(pos: XAndY, params: QParams2d): void;
-    /** Create a quantized point from the supplied Point2d using the specified params */
-    static create(pos: Point2d, params: QParams2d): QPoint2d;
-    /** Initialize `x` and `y` from `src`. */
-    copyFrom(src: QPoint2d): void;
-    /** Create a copy of this point.
-     * @param out If supplied, it will be modified in-place and returned; otherwise a new QPoint2d will be allocated and returned.
-     */
-    clone(out?: QPoint2d): QPoint2d;
-    /**
-     * Set the x and y components directly.
-     * @param x Must be an integer in the range [0, 0xffff]
-     * @param y Must be an integer in the range [0, 0xffff]
-     */
-    setFromScalars(x: number, y: number): void;
-    /**
-     * Create a QPoint2d directly from x and y components.
-     * @param x Must be an integer in the range [0, 0xffff]
-     * @param y Must be an integer in the range [0, 0xffff]
-     */
-    static fromScalars(x: number, y: number): QPoint2d;
-    /** Return a Point2d unquantized according to the supplied `params`. If `out` is supplied, it will be modified in-place and returned. */
-    unquantize(params: QParams2d, out?: Point2d): Point2d;
-}
-/** A compact representation of a list of [[QPoint2d]]s stored in a `Uint16Array`
- * This representation is particularly useful when passing data to WebGL; for example, see [RealityMeshParams.uvs]($frontend).
- * @see [[QPoint3dBuffer]] for 3d points.
- * @public
- * @extensions
- */
-export interface QPoint2dBuffer {
-    /** The parameters used to quantize the [[points]]. */
-    params: QParams2d;
-    /** The [[QPoint2d]]s as pairs of unsigned 16-bit integers. The length must be a multiple of 2; the number of points in the array is half the array's length.
-     * To obtain the `n`th point, use `QPoint2d.fromScalars(buffer.points[n * 2], buffer.points[n * 2 + 1])`.
-     */
-    points: Uint16Array;
-}
-/** @public
- * @extensions
- */
-export declare namespace QPoint2dBuffer {
-    /** Extracts the point at the specified index from a buffer.
-     * @param points The buffer in which each consecutive pair of integers is a 2d quantized point.
-     * @param pointIndex The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
-     * @param result If supplied, a preallocated [[QPoint2d]] to initialize with the result and return.
-     * @returns The point at `pointIndex`.
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    function getQPoint(points: Uint16Array, pointIndex: number, result?: QPoint2d): QPoint2d;
-    /** Extracts and unquantizes the point at the specified index from a buffer.
-     * @param buffer The array of points and the quantization parameters.
-     * @param The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
-     * @param result If supplied, a preallocated [Point2d]($core-geometry) to initialize with the result and return.
-     * @returns The point at `pointIndex`.
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    function unquantizePoint(buffer: QPoint2dBuffer, pointIndex: number, result?: Point2d): Point2d;
-}
-/** A list of [[QPoint2d]]s all quantized to the same range.
- * @public
- * @extensions
- */
-export declare class QPoint2dList {
-    /** Parameters used to quantize the points. */
-    readonly params: QParams2d;
-    private readonly _list;
-    /** The list of quantized points. */
-    get list(): ReadonlyArray<QPoint2d>;
-    /** Construct an empty list set up to use the supplied quantization parameters. */
-    constructor(params: QParams2d);
-    /** Removes all points from the list. */
-    clear(): void;
-    /** Removes all points from the list and change the quantization parameters. */
-    reset(params: QParams2d): void;
-    /** Quantizes the supplied Point2d to this list's range and appends it to the list. */
-    add(pt: Point2d): void;
-    /** Adds a previously-quantized point to this list. */
-    push(qpt: QPoint2d): void;
-    /** The number of points in the list. */
-    get length(): number;
-    /** Returns the unquantized value of the point at the specified index in the list. */
-    unquantize(index: number, out?: Point2d): Point2d;
-    /** Changes the quantization parameters and requantizes all points in the list to the new range.
-     * @note The loss of precision is compounded each time the points are requantized to a new range.
-     */
-    requantize(params: QParams2d): void;
-    /** Extracts the current contents of the list as a Uint16Array such that the first element of the array corresponds to the first point's `x` component,
-     * the second to the first point's `y` component, and so on.
-     */
-    toTypedArray(): Uint16Array;
-    /**  Create from a Uint16Array laid out such that `array[0]` corresponds to the first point's `x` component, `array[1]` to the first point's `y` component, and so on. */
-    fromTypedArray(range: Range2d, array: Uint16Array): void;
-    /** Construct a QPoint2dList containing all points in the supplied list, quantized to the range of those points. */
-    static fromPoints(points: Point2d[], out?: QPoint2dList): QPoint2dList;
-}
-/** Parameters used for [[Quantization]] of 3d points such that the `x`, `y`, and `z` components are each quantized to 16-bit unsigned integers.
- * @see [[QPoint3d]] for the quantized representation of a [Point3d]($core-geometry).
- * @see [[QPoint3dList]] for a list of [[QPoint3d]]s quantized using a [[QParams3d]].
- * @public
- * @extensions
- */
-export declare class QParams3d {
-    /** The origin of the quantization range. */
-    readonly origin: Point3d;
-    /** The scale applied to coordinates to quantize them. */
-    readonly scale: Point3d;
-    private constructor();
-    private setFrom;
-    /** Set `x`, `y`, and `z` from `src. */
-    copyFrom(src: QParams3d): void;
-    /** Create a copy of these parameters.
-     * @param out If supplied, it will be modified in-place and returned instead of allocating a new QParams3d.
-     */
-    clone(out?: QParams3d): QParams3d;
-    /** Initialize from origin and scale */
-    setFromOriginAndScale(origin: Point3d, scale: Point3d): void;
-    /** Initialize these parameters to support quantization of values within the specified range. */
-    setFromRange(range: Range3d, rangeScale?: number): void;
-    /** Return the unquantized point for the input components.
-     * @param out If supplied, it will be modified in-place and returned instead of allocating a new Point3d.
-     */
-    unquantize(x: number, y: number, z: number, out?: Point3d): Point3d;
-    /** Creates parameters to support quantization of values within the specified range.
-     * If `out` is supplied, it will be modified in-place and returned instead of allocating a new QParams3d.
-     */
-    static fromRange(range: Range3d, out?: QParams3d, rangeScale?: number): QParams3d;
-    /** Creates parameters supporting quantization of values within the range [-1.0, 1.0].
-     * If `out` is supplied, it will be modified in-place and returned instead of allocating a new QParams3d.
-     */
-    static fromOriginAndScale(origin: Point3d, scale: Point3d, out?: QParams3d): QParams3d;
-    /** Creates parameters supporting quantization of values within the range [-1.0, 1.0]. */
-    static fromNormalizedRange(rangeScale?: number): QParams3d;
-    /** Creates parameters supporting quantization of values within the range [0.0, 1.0]. */
-    static fromZeroToOne(rangeScale?: number): QParams3d;
-    /** @internal */
-    get rangeDiagonal(): Vector3d;
-    /** Return true if the point point is quantizable using these parameters. */
-    isQuantizable(point: Point3d): boolean;
-    /** Compute the range to which these parameters quantize. */
-    computeRange(out?: Range3d): Range3d;
-}
-/** Represents a [Point3d]($core-geometry) compressed such that each component `x`, `y`, and `z` is quantized to the 16-bit integer range [0, 0xffff].
- * These are primarily used to reduce the space required for coordinates used by [RenderGraphic]($frontend)s.
- * @see [[QParams3d]] to define quantization parameters for a range of points.
- * @see [[QPoint3dList]] for a list of points all quantized to the same range.
- * @public
- * @extensions
- */
-export declare class QPoint3d {
-    private _x;
-    private _y;
-    private _z;
-    /** The quantized x component. */
-    get x(): number;
-    set x(x: number);
-    /** The quantized y component. */
-    get y(): number;
-    set y(y: number);
-    /** The quantized z component. */
-    get z(): number;
-    set z(z: number);
-    /** Construct with all components initialized to zero. */
-    constructor();
-    /** Initialize this point by quantizing the supplied { x, y, z } using the specified params */
-    init(pos: XYAndZ, params: QParams3d): void;
-    /** Creates a quantized point from the supplied Point3d using the specified params */
-    static create(pos: Point3d, params: QParams3d): QPoint3d;
-    /** Set this points components from `src`. */
-    copyFrom(src: QPoint3d): void;
-    /** Create a copy of this point.
-     * @param out If supplied, it will be modified in-place instead of allocating a new QPoint3d.
-     */
-    clone(out?: QPoint3d): QPoint3d;
-    /**
-     * Sets the x, y, and z components directly.
-     * @param x Must be an integer in the range [0, 0xffff]
-     * @param y Must be an integer in the range [0, 0xffff]
-     * @param z Must be an integer in the range [0, 0xffff]
-     */
-    setFromScalars(x: number, y: number, z: number): void;
-    /**
-     * Creates a QPoint3d directly from x, y, and z components.
-     * @param x Must be an integer in the range [0, 0xffff]
-     * @param y Must be an integer in the range [0, 0xffff]
-     * @param z Must be an integer in the range [0, 0xffff]
-     * @param out If supplied, it will be modified in-place instead of allocating a new QPoint3d.
-     */
-    static fromScalars(x: number, y: number, z: number, out?: QPoint3d): QPoint3d;
-    /** Returns a Point3d unquantized according to the supplied params.
-     * If `out` is supplied, it will be modified in-place instead of allocating a new Point3d.
-     */
-    unquantize(params: QParams3d, out?: Point3d): Point3d;
-    /** Return true if this point's components are identical to the other point's components. */
-    equals(other: QPoint3d): boolean;
-    /** Perform ordinal comparison to another point. The function returns:
-     *  - Zero if this point is identical to `rhs`; or
-     *  - A number less than zero if this point is ordered before `rhs`; or
-     *  - A number greater than zero if this point is ordered after `rhs`.
-     * @see [OrderedComparator]($core-bentley).
-     */
-    compare(rhs: QPoint3d): number;
-}
-/** A compact representation of a list of [[QPoint3d]]s stored in a `Uint16Array`.
- * This representation is particularly useful when passing data to WebGL; for example, see [RealityMeshParams.positions]($frontend).
- * @public
- * @extensions
- */
-export interface QPoint3dBuffer {
-    /** The parameters used to quantize the [[points]]. */
-    params: QParams3d;
-    /** The [[QPoint3d]]s as pairs of unsigned 16-bit integers. The length must be a multiple of 3; the number of points in the array is half the array's length.
-     * To obtain the `n`th point, use `QPoint3d.fromScalars(buffer.points[n * 3], buffer.points[n * 3 + 1], buffer.points[n * 3 + 2])`.
-     */
-    points: Uint16Array;
-}
-/** @public
- * @extensions
- */
-export declare namespace QPoint3dBuffer {
-    /** Extracts the point at the specified index from a buffer.
-     * @param points The buffer in which each consecutive pair of integers is a 3d quantized point.
-     * @param pointIndex The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
-     * @param result If supplied, a preallocated [[QPoint3d]] to initialize with the result and return.
-     * @returns The point at `pointIndex`.
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    function getQPoint(points: Uint16Array, pointIndex: number, result?: QPoint3d): QPoint3d;
-    /** Extracts and unquantizes the point at the specified index from a buffer.
-     * @param buffer The array of points and the quantization parameters.
-     * @param The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
-     * @param result If supplied, a preallocated [Point3d]($core-geometry) to initialize with the result and return.
-     * @returns The point at `pointIndex`.
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    function unquantizePoint(buffer: QPoint3dBuffer, pointIndex: number, result?: Point3d): Point3d;
-}
-/** A list of [[QPoint3d]]s all quantized to the same range.
- * @public
- * @extensions
- */
-export declare class QPoint3dList {
-    /** Parameters used to quantize the points. */
-    readonly params: QParams3d;
-    private readonly _list;
-    /** The list of quantized points. */
-    get list(): ReadonlyArray<QPoint3d>;
-    /** Construct an empty list set up to quantize to the supplied range.
-     * @param The quantization parameters. If omitted, a null range will be used.
-     */
-    constructor(params?: QParams3d);
-    /** Construct a QPoint3dList containing all points in the supplied list, quantized to the range of those points.
-     * @param The points to quantize and add to the list.
-     * @param out If supplied, it will be cleared, its parameters recomputed, and the points will be added to it; otherwise, a new QPoint3dList will be created and returned.
-     */
-    static fromPoints(points: Point3d[], out?: QPoint3dList): QPoint3dList;
-    /** Removes all points from the list. */
-    clear(): void;
-    /** Clears out the contents of the list and changes the quantization parameters. */
-    reset(params: QParams3d): void;
-    /** Quantizes the supplied Point3d to this list's range and appends it to the list. */
-    add(pt: Point3d): void;
-    /** Adds a previously-quantized point to this list. */
-    push(qpt: QPoint3d): void;
-    /** The number of points in the list. */
-    get length(): number;
-    /** Returns the unquantized value of the point at the specified index in the list. */
-    unquantize(index: number, out?: Point3d): Point3d;
-    /** Changes the quantization parameters and requantizes all points in the list to the new range.
-     * @note The loss of precision is compounded each time the points are requantized to a new range.
-     */
-    requantize(params: QParams3d): void;
-    /** Extracts the current contents of the list as a Uint16Array such that the first 3 elements contain the first point's x, y, and z components,
-     * the second three elements contain the second point's components, and so on.
-     */
-    toTypedArray(): Uint16Array;
-    /** Reinitialize from a Uint16Array in which the first three elements specify the x, y, and z components of the first point, the second three elements specify the components
-     * of the second point, and so on.
-     */
-    fromTypedArray(range: Range3d, array: Uint16Array): void;
-    /** Construct a list containing all points in the supplied list, quantized using the supplied parameters. */
-    static createFrom(points: Point3d[], params: QParams3d): QPoint3dList;
-    /** An iterator over the points in the list. */
-    [Symbol.iterator](): IterableIterator<QPoint3d>;
-}
-/** Options used to construct a [[QPoint2dBufferBuilder]].
- * @beta
- * @extensions
- */
-interface QPoint2dBufferBuilderOptions {
-    /** The range to which the points will be quantized. This must be large enough to contain all of the points that will be added to the buffer. */
-    range: Range2d;
-    /** The number of points for which to allocate space.
-     * @see [TypedArrayBuilderOptions.initialCapacity]($bentley).
-     */
-    initialCapacity?: number;
-    /** Multiplier used to compute new capacity when resizing the buffer.
-     * @see [TypedArrayBuilderOptions.growthFactor]($bentley).
-     */
-    growthFactor?: number;
-}
-/** Constructs a [[QPoint2dBuffer]] using a [Uint16ArrayBuilder]($bentley).
- * @public
- * @extensions
- */
-export declare class QPoint2dBufferBuilder {
-    private readonly _scratchQPoint2d;
-    /** The parameters used to quantize the points in the [[buffer]]. */
-    readonly params: QParams2d;
-    /** The buffer that holds the points. */
-    readonly buffer: Uint16ArrayBuilder;
-    /** Construct a new buffer with a [[length]] of zero. */
-    constructor(options: QPoint2dBufferBuilderOptions);
-    /** Append a point with the specified quantized coordinates. */
-    pushXY(x: number, y: number): void;
-    /** Append a point with the specified quantized coordinates. */
-    push(pt: XAndY): void;
-    /** The number of points currently in the [[buffer]]. */
-    get length(): number;
-    /** Returns the quantized point at the specified index in [[buffer]].
-     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
-     * @param result If supplied, a [[QPoint2d]] to initialize with the result and return.
-     * @returns The quantized point at the specified index in [[buffer]].
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    get(pointIndex: number, result?: QPoint2d): QPoint2d;
-    /** Returns the unquantized point at the specified index in [[buffer]].
-     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
-     * @param result If supplied, a [Point2d]($core-geometry) to initialize with the result and return.
-     * @returns The unquantized point at the specified index in [[buffer]].
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    unquantize(pointIndex: number, result?: Point2d): Point2d;
-    /** Obtain a [[QPoint2dBuffer]] containing all of the points that have been appended by this builder. */
-    finish(): QPoint2dBuffer;
-}
-/** Options used to construct a [[QPoint3dBufferBuilder]].
- * @beta
- * @extensions
- */
-interface QPoint3dBufferBuilderOptions {
-    /** The range to which the points will be quantized. This must be large enough to contain all of the points that will be added to the buffer. */
-    range: Range3d;
-    /** The number of points for which to allocate space.
-     * @see [TypedArrayBuilderOptions.initialCapacity]($bentley).
-     */
-    initialCapacity?: number;
-    /** Multiplier used to compute new capacity when resizing the buffer.
-     * @see [TypedArrayBuilderOptions.growthFactor]($bentley).
-     */
-    growthFactor?: number;
-}
-/** Constructs a [[QPoint3dBuffer]] using a [Uint16ArrayBuilder]($bentley).
- * @public
- * @extensions
- */
-export declare class QPoint3dBufferBuilder {
-    private readonly _scratchQPoint3d;
-    /** The parameters used to quantize the points in the [[buffer]]. */
-    readonly params: QParams3d;
-    /** The buffer that holds the points. */
-    readonly buffer: Uint16ArrayBuilder;
-    /** Construct a new buffer with a [[length]] of zero. */
-    constructor(options: QPoint3dBufferBuilderOptions);
-    /** Append a point with the specified quantized coordinates. */
-    pushXYZ(x: number, y: number, z: number): void;
-    /** Append a point with the specified quantized coordinates. */
-    push(pt: XYAndZ): void;
-    /** The number of points currently in the [[buffer]]. */
-    get length(): number;
-    /** Returns the quantized point at the specified index in [[buffer]].
-     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
-     * @param result If supplied, a [[QPoint3d]] to initialize with the result and return.
-     * @returns The quantized point at the specified index in [[buffer]].
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    get(pointIndex: number, result?: QPoint3d): QPoint3d;
-    /** Returns the unquantized point at the specified index in [[buffer]].
-     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
-     * @param result If supplied, a [Point3d]($core-geometry) to initialize with the result and return.
-     * @returns The unquantized point at the specified index in [[buffer]].
-     * @throws Error if `pointIndex` is out of bounds.
-     */
-    unquantize(pointIndex: number, result?: Point3d): Point3d;
-    /** Obtain a [[QPoint3dBuffer]] containing all of the points that have been appended by this builder. */
-    finish(): QPoint3dBuffer;
-}
-export {};
+/** @packageDocumentation
+ * @module Geometry
+ */
+import { Uint16ArrayBuilder } from "@itwin/core-bentley";
+import { Point2d, Point3d, Range2d, Range3d, Vector2d, Vector3d, XAndY, XYAndZ } from "@itwin/core-geometry";
+/**
+ * Provides facilities for quantizing floating point values within a specified range into 16-bit unsigned integers.
+ * This is a lossy compression technique.
+ * Given a floating point range [min, max], a floating point value `x` within that range is quantized by subtracting
+ * `min`, scaling the result according to `max`, and truncating the result to an integer.
+ * Therefore min quantizes to 0, max to 0xffff, (min+max)/2 to 0x7fff, and so on.
+ * These routines are chiefly used by classes like [[QPoint2d]] and [[QPoint3d]] to reduce the space required to store
+ * coordinate values for [RenderGraphic]($frontend)s.
+ * @public
+ * @extensions
+ */
+export declare namespace Quantization {
+    const rangeScale16 = 65535;
+    const rangeScale8 = 255;
+    /** Compute the scale factor required to quantize `extent` to `rangeScale` discrete values. */
+    function computeScale(extent: number, rangeScale?: number): number;
+    /** @internal */
+    function isInRange(qpos: number, rangeScale?: number): boolean;
+    /** Return `pos` quantized to the range [`origin`, `origin + rangeScale`].
+     * @see [[Quantization.unquantize]] for the inverse operation.
+     */
+    function quantize(pos: number, origin: number, scale: number, rangeScale?: number): number;
+    /** @internal */
+    function isQuantizable(pos: number, origin: number, scale: number, rangeScale?: number): boolean;
+    /** Give `qpos` quantized to the range [`origin`, `origin + rangeScale`], return the unquantized value.
+     * @see [[Quantization.quantize]] for the inverse operation.
+     */
+    function unquantize(qpos: number, origin: number, scale: number): number;
+    /** @internal */
+    function isQuantized(qpos: number): boolean;
+}
+/** Parameters used for [[Quantization]] of 2d points such that the `x` and `y` components are each quantized to 16-bit unsigned integers.
+ * @see [[QPoint2d]] for the quantized representation of a [Point2d]($core-geometry).
+ * @see [[QPoint2dList]] for a list of [[QPoint2d]]s quantized using a [[QParams2d]].
+ * @public
+ * @extensions
+ */
+export declare class QParams2d {
+    /** The origin of the quantization range. */
+    readonly origin: Point2d;
+    /** The scale applied to coordinates to quantize them. */
+    readonly scale: Point2d;
+    private constructor();
+    private setFrom;
+    /** Set [[origin]] and [[scale]] from `src`. */
+    copyFrom(src: QParams2d): void;
+    /** Create a copy of these params.
+     * @param out If supplied, these QParams2d will be modified and returned; otherwise a new QParams2d object will be created and returned.
+     */
+    clone(out?: QParams2d): QParams2d;
+    /** Initialize these parameters to support quantization of values within the specified range. */
+    setFromRange(range: Range2d, rangeScale?: number): void;
+    /** Create parameters to support quantization of values within the specified range. */
+    static fromRange(range: Range2d, out?: QParams2d, rangeScale?: number): QParams2d;
+    /** Return the unquantized point for the input `x` and `y` components. If `out` is supplied, it will be modified to hold the result and returned. */
+    unquantize(x: number, y: number, out?: Point2d): Point2d;
+    /** Creates parameters supporting quantization of values within the range [-1.0, 1.0], appropriate for normalized 2d vectors. */
+    static fromNormalizedRange(rangeScale?: number): QParams2d;
+    /** Create parameters supporting quantization of values within the range [0.0, 1.0]. */
+    static fromZeroToOne(rangeScale?: number): QParams2d;
+    /** Create parameters from origin and scale components */
+    static fromOriginAndScale(originX: number, originY: number, scaleX: number, scaleY: number): QParams2d;
+    /** @internal */
+    get rangeDiagonal(): Vector2d;
+    /** Return true if the point point is quantizable using these parameters. */
+    isQuantizable(point: Point2d): boolean;
+}
+/** Represents a [Point2d]($core-geometry) compressed such that each component `x` and `y` is quantized to the 16-bit integer range [0, 0xffff].
+ * These are primarily used to reduce the space required for coordinates used by [RenderGraphic]($frontend)s.
+ * @see [[QParams2d]] to define quantization parameters for a range of points.
+ * @see [[QPoint2dList]] for a list of points all quantized to the same range.
+ * @public
+ * @extensions
+ */
+export declare class QPoint2d {
+    private _x;
+    private _y;
+    /** The quantized x component. */
+    get x(): number;
+    set x(x: number);
+    /** The quantized y component. */
+    get y(): number;
+    set y(y: number);
+    /** Construct with `x` and `y` initialized to zero. */
+    constructor();
+    /** Initialize this point by quantizing the supplied { x, y } using the specified params */
+    init(pos: XAndY, params: QParams2d): void;
+    /** Create a quantized point from the supplied Point2d using the specified params */
+    static create(pos: Point2d, params: QParams2d): QPoint2d;
+    /** Initialize `x` and `y` from `src`. */
+    copyFrom(src: QPoint2d): void;
+    /** Create a copy of this point.
+     * @param out If supplied, it will be modified in-place and returned; otherwise a new QPoint2d will be allocated and returned.
+     */
+    clone(out?: QPoint2d): QPoint2d;
+    /**
+     * Set the x and y components directly.
+     * @param x Must be an integer in the range [0, 0xffff]
+     * @param y Must be an integer in the range [0, 0xffff]
+     */
+    setFromScalars(x: number, y: number): void;
+    /**
+     * Create a QPoint2d directly from x and y components.
+     * @param x Must be an integer in the range [0, 0xffff]
+     * @param y Must be an integer in the range [0, 0xffff]
+     */
+    static fromScalars(x: number, y: number): QPoint2d;
+    /** Return a Point2d unquantized according to the supplied `params`. If `out` is supplied, it will be modified in-place and returned. */
+    unquantize(params: QParams2d, out?: Point2d): Point2d;
+}
+/** A compact representation of a list of [[QPoint2d]]s stored in a `Uint16Array`
+ * This representation is particularly useful when passing data to WebGL; for example, see [RealityMeshParams.uvs]($frontend).
+ * @see [[QPoint3dBuffer]] for 3d points.
+ * @public
+ * @extensions
+ */
+export interface QPoint2dBuffer {
+    /** The parameters used to quantize the [[points]]. */
+    params: QParams2d;
+    /** The [[QPoint2d]]s as pairs of unsigned 16-bit integers. The length must be a multiple of 2; the number of points in the array is half the array's length.
+     * To obtain the `n`th point, use `QPoint2d.fromScalars(buffer.points[n * 2], buffer.points[n * 2 + 1])`.
+     */
+    points: Uint16Array;
+}
+/** @public
+ * @extensions
+ */
+export declare namespace QPoint2dBuffer {
+    /** Extracts the point at the specified index from a buffer.
+     * @param points The buffer in which each consecutive pair of integers is a 2d quantized point.
+     * @param pointIndex The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
+     * @param result If supplied, a preallocated [[QPoint2d]] to initialize with the result and return.
+     * @returns The point at `pointIndex`.
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    function getQPoint(points: Uint16Array, pointIndex: number, result?: QPoint2d): QPoint2d;
+    /** Extracts and unquantizes the point at the specified index from a buffer.
+     * @param buffer The array of points and the quantization parameters.
+     * @param The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
+     * @param result If supplied, a preallocated [Point2d]($core-geometry) to initialize with the result and return.
+     * @returns The point at `pointIndex`.
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    function unquantizePoint(buffer: QPoint2dBuffer, pointIndex: number, result?: Point2d): Point2d;
+}
+/** A list of [[QPoint2d]]s all quantized to the same range.
+ * @public
+ * @extensions
+ */
+export declare class QPoint2dList {
+    /** Parameters used to quantize the points. */
+    readonly params: QParams2d;
+    private readonly _list;
+    /** The list of quantized points. */
+    get list(): ReadonlyArray<QPoint2d>;
+    /** Construct an empty list set up to use the supplied quantization parameters. */
+    constructor(params: QParams2d);
+    /** Removes all points from the list. */
+    clear(): void;
+    /** Removes all points from the list and change the quantization parameters. */
+    reset(params: QParams2d): void;
+    /** Quantizes the supplied Point2d to this list's range and appends it to the list. */
+    add(pt: Point2d): void;
+    /** Adds a previously-quantized point to this list. */
+    push(qpt: QPoint2d): void;
+    /** The number of points in the list. */
+    get length(): number;
+    /** Returns the unquantized value of the point at the specified index in the list. */
+    unquantize(index: number, out?: Point2d): Point2d;
+    /** Changes the quantization parameters and requantizes all points in the list to the new range.
+     * @note The loss of precision is compounded each time the points are requantized to a new range.
+     */
+    requantize(params: QParams2d): void;
+    /** Extracts the current contents of the list as a Uint16Array such that the first element of the array corresponds to the first point's `x` component,
+     * the second to the first point's `y` component, and so on.
+     */
+    toTypedArray(): Uint16Array;
+    /**  Create from a Uint16Array laid out such that `array[0]` corresponds to the first point's `x` component, `array[1]` to the first point's `y` component, and so on. */
+    fromTypedArray(range: Range2d, array: Uint16Array): void;
+    /** Construct a QPoint2dList containing all points in the supplied list, quantized to the range of those points. */
+    static fromPoints(points: Point2d[], out?: QPoint2dList): QPoint2dList;
+}
+/** Parameters used for [[Quantization]] of 3d points such that the `x`, `y`, and `z` components are each quantized to 16-bit unsigned integers.
+ * @see [[QPoint3d]] for the quantized representation of a [Point3d]($core-geometry).
+ * @see [[QPoint3dList]] for a list of [[QPoint3d]]s quantized using a [[QParams3d]].
+ * @public
+ * @extensions
+ */
+export declare class QParams3d {
+    /** The origin of the quantization range. */
+    readonly origin: Point3d;
+    /** The scale applied to coordinates to quantize them. */
+    readonly scale: Point3d;
+    private constructor();
+    private setFrom;
+    /** Set `x`, `y`, and `z` from `src. */
+    copyFrom(src: QParams3d): void;
+    /** Create a copy of these parameters.
+     * @param out If supplied, it will be modified in-place and returned instead of allocating a new QParams3d.
+     */
+    clone(out?: QParams3d): QParams3d;
+    /** Initialize from origin and scale */
+    setFromOriginAndScale(origin: Point3d, scale: Point3d): void;
+    /** Initialize these parameters to support quantization of values within the specified range. */
+    setFromRange(range: Range3d, rangeScale?: number): void;
+    /** Return the unquantized point for the input components.
+     * @param out If supplied, it will be modified in-place and returned instead of allocating a new Point3d.
+     */
+    unquantize(x: number, y: number, z: number, out?: Point3d): Point3d;
+    /** Creates parameters to support quantization of values within the specified range.
+     * If `out` is supplied, it will be modified in-place and returned instead of allocating a new QParams3d.
+     */
+    static fromRange(range: Range3d, out?: QParams3d, rangeScale?: number): QParams3d;
+    /** Creates parameters supporting quantization of values within the range [-1.0, 1.0].
+     * If `out` is supplied, it will be modified in-place and returned instead of allocating a new QParams3d.
+     */
+    static fromOriginAndScale(origin: Point3d, scale: Point3d, out?: QParams3d): QParams3d;
+    /** Creates parameters supporting quantization of values within the range [-1.0, 1.0]. */
+    static fromNormalizedRange(rangeScale?: number): QParams3d;
+    /** Creates parameters supporting quantization of values within the range [0.0, 1.0]. */
+    static fromZeroToOne(rangeScale?: number): QParams3d;
+    /** @internal */
+    get rangeDiagonal(): Vector3d;
+    /** Return true if the point point is quantizable using these parameters. */
+    isQuantizable(point: Point3d): boolean;
+    /** Compute the range to which these parameters quantize. */
+    computeRange(out?: Range3d): Range3d;
+}
+/** Represents a [Point3d]($core-geometry) compressed such that each component `x`, `y`, and `z` is quantized to the 16-bit integer range [0, 0xffff].
+ * These are primarily used to reduce the space required for coordinates used by [RenderGraphic]($frontend)s.
+ * @see [[QParams3d]] to define quantization parameters for a range of points.
+ * @see [[QPoint3dList]] for a list of points all quantized to the same range.
+ * @public
+ * @extensions
+ */
+export declare class QPoint3d {
+    private _x;
+    private _y;
+    private _z;
+    /** The quantized x component. */
+    get x(): number;
+    set x(x: number);
+    /** The quantized y component. */
+    get y(): number;
+    set y(y: number);
+    /** The quantized z component. */
+    get z(): number;
+    set z(z: number);
+    /** Construct with all components initialized to zero. */
+    constructor();
+    /** Initialize this point by quantizing the supplied { x, y, z } using the specified params */
+    init(pos: XYAndZ, params: QParams3d): void;
+    /** Creates a quantized point from the supplied Point3d using the specified params */
+    static create(pos: Point3d, params: QParams3d): QPoint3d;
+    /** Set this points components from `src`. */
+    copyFrom(src: QPoint3d): void;
+    /** Create a copy of this point.
+     * @param out If supplied, it will be modified in-place instead of allocating a new QPoint3d.
+     */
+    clone(out?: QPoint3d): QPoint3d;
+    /**
+     * Sets the x, y, and z components directly.
+     * @param x Must be an integer in the range [0, 0xffff]
+     * @param y Must be an integer in the range [0, 0xffff]
+     * @param z Must be an integer in the range [0, 0xffff]
+     */
+    setFromScalars(x: number, y: number, z: number): void;
+    /**
+     * Creates a QPoint3d directly from x, y, and z components.
+     * @param x Must be an integer in the range [0, 0xffff]
+     * @param y Must be an integer in the range [0, 0xffff]
+     * @param z Must be an integer in the range [0, 0xffff]
+     * @param out If supplied, it will be modified in-place instead of allocating a new QPoint3d.
+     */
+    static fromScalars(x: number, y: number, z: number, out?: QPoint3d): QPoint3d;
+    /** Returns a Point3d unquantized according to the supplied params.
+     * If `out` is supplied, it will be modified in-place instead of allocating a new Point3d.
+     */
+    unquantize(params: QParams3d, out?: Point3d): Point3d;
+    /** Return true if this point's components are identical to the other point's components. */
+    equals(other: QPoint3d): boolean;
+    /** Perform ordinal comparison to another point. The function returns:
+     *  - Zero if this point is identical to `rhs`; or
+     *  - A number less than zero if this point is ordered before `rhs`; or
+     *  - A number greater than zero if this point is ordered after `rhs`.
+     * @see [OrderedComparator]($core-bentley).
+     */
+    compare(rhs: QPoint3d): number;
+}
+/** A compact representation of a list of [[QPoint3d]]s stored in a `Uint16Array`.
+ * This representation is particularly useful when passing data to WebGL; for example, see [RealityMeshParams.positions]($frontend).
+ * @public
+ * @extensions
+ */
+export interface QPoint3dBuffer {
+    /** The parameters used to quantize the [[points]]. */
+    params: QParams3d;
+    /** The [[QPoint3d]]s as pairs of unsigned 16-bit integers. The length must be a multiple of 3; the number of points in the array is half the array's length.
+     * To obtain the `n`th point, use `QPoint3d.fromScalars(buffer.points[n * 3], buffer.points[n * 3 + 1], buffer.points[n * 3 + 2])`.
+     */
+    points: Uint16Array;
+}
+/** @public
+ * @extensions
+ */
+export declare namespace QPoint3dBuffer {
+    /** Extracts the point at the specified index from a buffer.
+     * @param points The buffer in which each consecutive pair of integers is a 3d quantized point.
+     * @param pointIndex The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
+     * @param result If supplied, a preallocated [[QPoint3d]] to initialize with the result and return.
+     * @returns The point at `pointIndex`.
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    function getQPoint(points: Uint16Array, pointIndex: number, result?: QPoint3d): QPoint3d;
+    /** Extracts and unquantizes the point at the specified index from a buffer.
+     * @param buffer The array of points and the quantization parameters.
+     * @param The index of the point to extract, ranging from zero to one less than the number of points in the buffer.
+     * @param result If supplied, a preallocated [Point3d]($core-geometry) to initialize with the result and return.
+     * @returns The point at `pointIndex`.
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    function unquantizePoint(buffer: QPoint3dBuffer, pointIndex: number, result?: Point3d): Point3d;
+}
+/** A list of [[QPoint3d]]s all quantized to the same range.
+ * @public
+ * @extensions
+ */
+export declare class QPoint3dList {
+    /** Parameters used to quantize the points. */
+    readonly params: QParams3d;
+    private readonly _list;
+    /** The list of quantized points. */
+    get list(): ReadonlyArray<QPoint3d>;
+    /** Construct an empty list set up to quantize to the supplied range.
+     * @param The quantization parameters. If omitted, a null range will be used.
+     */
+    constructor(params?: QParams3d);
+    /** Construct a QPoint3dList containing all points in the supplied list, quantized to the range of those points.
+     * @param The points to quantize and add to the list.
+     * @param out If supplied, it will be cleared, its parameters recomputed, and the points will be added to it; otherwise, a new QPoint3dList will be created and returned.
+     */
+    static fromPoints(points: Point3d[], out?: QPoint3dList): QPoint3dList;
+    /** Removes all points from the list. */
+    clear(): void;
+    /** Clears out the contents of the list and changes the quantization parameters. */
+    reset(params: QParams3d): void;
+    /** Quantizes the supplied Point3d to this list's range and appends it to the list. */
+    add(pt: Point3d): void;
+    /** Adds a previously-quantized point to this list. */
+    push(qpt: QPoint3d): void;
+    /** The number of points in the list. */
+    get length(): number;
+    /** Returns the unquantized value of the point at the specified index in the list. */
+    unquantize(index: number, out?: Point3d): Point3d;
+    /** Changes the quantization parameters and requantizes all points in the list to the new range.
+     * @note The loss of precision is compounded each time the points are requantized to a new range.
+     */
+    requantize(params: QParams3d): void;
+    /** Extracts the current contents of the list as a Uint16Array such that the first 3 elements contain the first point's x, y, and z components,
+     * the second three elements contain the second point's components, and so on.
+     */
+    toTypedArray(): Uint16Array;
+    /** Reinitialize from a Uint16Array in which the first three elements specify the x, y, and z components of the first point, the second three elements specify the components
+     * of the second point, and so on.
+     */
+    fromTypedArray(range: Range3d, array: Uint16Array): void;
+    /** Construct a list containing all points in the supplied list, quantized using the supplied parameters. */
+    static createFrom(points: Point3d[], params: QParams3d): QPoint3dList;
+    /** An iterator over the points in the list. */
+    [Symbol.iterator](): IterableIterator<QPoint3d>;
+}
+/** Options used to construct a [[QPoint2dBufferBuilder]].
+ * @beta
+ * @extensions
+ */
+interface QPoint2dBufferBuilderOptions {
+    /** The range to which the points will be quantized. This must be large enough to contain all of the points that will be added to the buffer. */
+    range: Range2d;
+    /** The number of points for which to allocate space.
+     * @see [TypedArrayBuilderOptions.initialCapacity]($bentley).
+     */
+    initialCapacity?: number;
+    /** Multiplier used to compute new capacity when resizing the buffer.
+     * @see [TypedArrayBuilderOptions.growthFactor]($bentley).
+     */
+    growthFactor?: number;
+}
+/** Constructs a [[QPoint2dBuffer]] using a [Uint16ArrayBuilder]($bentley).
+ * @public
+ * @extensions
+ */
+export declare class QPoint2dBufferBuilder {
+    private readonly _scratchQPoint2d;
+    /** The parameters used to quantize the points in the [[buffer]]. */
+    readonly params: QParams2d;
+    /** The buffer that holds the points. */
+    readonly buffer: Uint16ArrayBuilder;
+    /** Construct a new buffer with a [[length]] of zero. */
+    constructor(options: QPoint2dBufferBuilderOptions);
+    /** Append a point with the specified quantized coordinates. */
+    pushXY(x: number, y: number): void;
+    /** Append a point with the specified quantized coordinates. */
+    push(pt: XAndY): void;
+    /** The number of points currently in the [[buffer]]. */
+    get length(): number;
+    /** Returns the quantized point at the specified index in [[buffer]].
+     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
+     * @param result If supplied, a [[QPoint2d]] to initialize with the result and return.
+     * @returns The quantized point at the specified index in [[buffer]].
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    get(pointIndex: number, result?: QPoint2d): QPoint2d;
+    /** Returns the unquantized point at the specified index in [[buffer]].
+     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
+     * @param result If supplied, a [Point2d]($core-geometry) to initialize with the result and return.
+     * @returns The unquantized point at the specified index in [[buffer]].
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    unquantize(pointIndex: number, result?: Point2d): Point2d;
+    /** Obtain a [[QPoint2dBuffer]] containing all of the points that have been appended by this builder. */
+    finish(): QPoint2dBuffer;
+}
+/** Options used to construct a [[QPoint3dBufferBuilder]].
+ * @beta
+ * @extensions
+ */
+interface QPoint3dBufferBuilderOptions {
+    /** The range to which the points will be quantized. This must be large enough to contain all of the points that will be added to the buffer. */
+    range: Range3d;
+    /** The number of points for which to allocate space.
+     * @see [TypedArrayBuilderOptions.initialCapacity]($bentley).
+     */
+    initialCapacity?: number;
+    /** Multiplier used to compute new capacity when resizing the buffer.
+     * @see [TypedArrayBuilderOptions.growthFactor]($bentley).
+     */
+    growthFactor?: number;
+}
+/** Constructs a [[QPoint3dBuffer]] using a [Uint16ArrayBuilder]($bentley).
+ * @public
+ * @extensions
+ */
+export declare class QPoint3dBufferBuilder {
+    private readonly _scratchQPoint3d;
+    /** The parameters used to quantize the points in the [[buffer]]. */
+    readonly params: QParams3d;
+    /** The buffer that holds the points. */
+    readonly buffer: Uint16ArrayBuilder;
+    /** Construct a new buffer with a [[length]] of zero. */
+    constructor(options: QPoint3dBufferBuilderOptions);
+    /** Append a point with the specified quantized coordinates. */
+    pushXYZ(x: number, y: number, z: number): void;
+    /** Append a point with the specified quantized coordinates. */
+    push(pt: XYAndZ): void;
+    /** The number of points currently in the [[buffer]]. */
+    get length(): number;
+    /** Returns the quantized point at the specified index in [[buffer]].
+     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
+     * @param result If supplied, a [[QPoint3d]] to initialize with the result and return.
+     * @returns The quantized point at the specified index in [[buffer]].
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    get(pointIndex: number, result?: QPoint3d): QPoint3d;
+    /** Returns the unquantized point at the specified index in [[buffer]].
+     * @param pointIndex The index of the point of interest, ranging from zero to one minus the number of points currently in the [[buffer]].
+     * @param result If supplied, a [Point3d]($core-geometry) to initialize with the result and return.
+     * @returns The unquantized point at the specified index in [[buffer]].
+     * @throws Error if `pointIndex` is out of bounds.
+     */
+    unquantize(pointIndex: number, result?: Point3d): Point3d;
+    /** Obtain a [[QPoint3dBuffer]] containing all of the points that have been appended by this builder. */
+    finish(): QPoint3dBuffer;
+}
+export {};
 //# sourceMappingURL=QPoint.d.ts.map