@itwin/core-common 3.4.0-dev.58 → 3.4.0-dev.60

package/lib/cjs/geometry/Projection.d.ts

@@ -1,252 +1,252 @@
-/** @packageDocumentation
- * @module Geometry
- */
-/** This enum contains the list of all projection methods that can be represented as part of the HorizontalCRS
- *  class. The None method indicates there is no projection and thus the CRS is longitude/latitude based
- *  with units as degrees.
- *  All other projection indicated a projected CRS.
- *  @public
- *  @extensions
- */
-export declare type ProjectionMethod = "None" | "TransverseMercator" | "SouthOrientedTransverseMercator" | "TransverseMercatorWisconsin" | "TransverseMercatorMinnesota" | "TransverseMercatorAffine" | "MercatorStandardParallel" | "Mercator" | "UniversalTransverseMercator" | "LambertConformalConicTwoParallels" | "LambertConformalConicBelgium" | "LambertConformalConicAffine" | "LambertConformalConicWisconsin" | "LambertConformalConicMinnesota" | "LambertConformalConicMichigan" | "LambertConformalConicOneParallel" | "AlbersEqualArea" | "NewZealandNationalGrid" | "ObliqueMercator1" | "ObliqueMercator2" | "TransverseMercatorOSTN97" | "TransverseMercatorOSTN02" | "TransverseMercatorOSTN15" | "Krovak" | "KrovakModified" | "ObliqueCylindricalSwiss" | "TransverseMercatorDenmarkSystem34" | "TransverseMercatorDenmarkSystem3499" | "TransverseMercatorDenmarkSystem3401" | "Cassini" | "Sinusoidal" | "VanDerGrinten" | "Bonne" | "Mollweide" | "EckertIV" | "EckertVI" | "GoodeHomolosine" | "Robinson" | "PlateCarree" | "MillerCylindrical" | "WinkelTripel" | "AzimuthalEqualArea" | "ObliqueStereographic" | "RectifiedSkewOrthomorphicCentered" | "RectifiedSkewOrthomorphicOrigin" | "ObliqueCylindricalHungary" | "Orthographic" | "AmericanPolyconic" | "LambertEquidistantAzimuthal" | "ObliqueMercatorMinnesota";
-/** The equations are:
- *  X1 = a1*X + a2*Y + TranslationX
- *  Y1 = b1*X + b2*Y + translationY
- *  An affine representing no transformation will have: a1 = 1.0, a2 = 0.0, b1 = 0.0, b2 = 1.0.
- *  @public
- *  @extensions
- */
-export interface AffineTransformProps {
-    /** The X post translation */
-    translationX: number;
-    /** The Y post-translation */
-    translationY: number;
-    /** A1 value as defined in global comment. */
-    a1: number;
-    /** B1 value as defined in global comment. */
-    b1: number;
-    /** A2 value as defined in global comment. */
-    a2: number;
-    /** B2 value as defined in global comment. */
-    b2: number;
-}
-/** The equations are:
- *  X1 = a1*X + a2*Y + TranslationX
- *  Y1 = b1*X + b2*Y + translationY
- *  An affine representing no transformation will have: a1 = 1.0, a2 = 0.0, b1 = 0.0, b2 = 1.0.
- *  @public
- */
-export declare class AffineTransform implements AffineTransformProps {
-    /** The X post translation */
-    readonly translationX: number;
-    /** The Y post-translation */
-    readonly translationY: number;
-    /** A1 value as defined in global comment. */
-    readonly a1: number;
-    /** B1 value as defined in global comment. */
-    readonly b1: number;
-    /** A2 value as defined in global comment. */
-    readonly a2: number;
-    /** B2 value as defined in global comment. */
-    readonly b2: number;
-    constructor(data?: AffineTransformProps);
-    /** Creates an Affine Transform from JSON representation.
-     * @public */
-    static fromJSON(data: AffineTransformProps): AffineTransform;
-    /** Creates a JSON from the Affine Transform definition
-     * @public */
-    toJSON(): AffineTransformProps;
-    /** Compares two Affine Transforms. It applies a minuscule tolerance for number compares
-     *  @public */
-    equals(other: AffineTransform): boolean;
-}
-/** Type used in the definition of UTM Zoning projection. This projection only requires a zone number and
- *  the hemisphere North or South.
- *  @public
- *  @extensions
- */
-export declare type HemisphereEnum = "South" | "North";
-/** The type to define the three zones of the Danish System 34 projections.
- *  @public
- * @extensions
- */
-export declare type DanishSystem34Region = "Jylland" | "Sjaelland" | "Bornholm";
-/** This class encapsulates the projection of the CRS. The projection relies on a projection method
- *  and a set of projection parameters specific to projection method selected.
- *  @public
- *  @extensions
- */
-export interface ProjectionProps {
-    /** The projection method. */
-    method: ProjectionMethod;
-    /** The False Easting of the projection. */
-    falseEasting?: number;
-    /** The False Northing of the projection. */
-    falseNorthing?: number;
-    /** The Central Meridian. */
-    centralMeridian?: number;
-    /** The latitude of origin of the projection. */
-    latitudeOfOrigin?: number;
-    /** Longitude of origin of the projection. */
-    longitudeOfOrigin?: number;
-    /** The scale reduction factor applied at origin. The nature of the projection has a
-     *  inherent scale factor applied that gradually varies outward from the projection origin.
-     *  The scale factor at origin enables to level the inherent scale factor over an use extent.
-     *  For the michigan variation of the Lambert Conformal Conic projection it
-     *  can be used instead or in addition to Standard Parallel to define
-     *  a scale factor.
-     */
-    scaleFactor?: number;
-    /** The elevation of the origin of the projection above the geoid. This value
-     *  allows compensation for the scale factor related to elevation above the sea level.
-     */
-    elevationAboveGeoid?: number;
-    /** The geoid separation. It represents the elevation of the geoid above the ellipsoid at the center of the projection. */
-    geoidSeparation?: number;
-    /** The definition of the affine post-transformation for Transverse Mercator and Lambert Conformal Conic with post-affine projections */
-    affine?: AffineTransformProps;
-    /** Standard parallel for projection that only use one.
-     *  For cylindrical projections (mercator, transverse mercator ...) it defines the parallel at
-     *  which the cylinder crosses the ellipsoid resulting in a scale factor being applied.
-     *  For conic projections (Lambert Tangential ...) it defines
-     *  the standard parallel at which the cone is tangent to the ellipsoid.
-     */
-    standardParallel?: number;
-    /** The first standard parallel at which the cone crosses the ellipsoid. */
-    standardParallel1?: number;
-    /** The second standard parallel at which the cone crosses the ellipsoid. */
-    standardParallel2?: number;
-    /** The UTM zone number. A number from 0 to 60. */
-    zoneNumber?: number;
-    /** The hemisphere for Universal Transverse Mercator projection. */
-    hemisphere?: HemisphereEnum;
-    /** Longitude of the central point. */
-    centralPointLongitude?: number;
-    /** Latitude of the central point. */
-    centralPointLatitude?: number;
-    /** Longitude of the first alignment point for some Oblique Mercator and Krovak projections. */
-    point1Longitude?: number;
-    /** Latitude of the first alignment point for some Oblique Mercator and Krovak projections. */
-    point1Latitude?: number;
-    /** Longitude of the second alignment point for some Oblique Mercator projections. */
-    point2Longitude?: number;
-    /** Latitude of the second alignment point for some Oblique Mercator projections. */
-    point2Latitude?: number;
-    /** The Danish zone for Danish projections. */
-    danishSystem34Region?: DanishSystem34Region;
-    /** Azimuth. */
-    azimuth?: number;
-}
-/** This class encapsulates the projection of the CRS. The projection relies on a projection method and a set
- *  of projection parameters specific to projection method selected to flatten the surface of the model of the Earth
- *  defines as a geodetic ellipsoid. The flattening and the distortion angular, linear, scale from the process varies between methods.
- *  Refer to appropriate external documentation for details.
- *  @note Various property sets are required for specific projection methods. The current class implementation does not enforce
- *        these rules yet and it is possible to define or not define any property regardless the method used.
- *  @public
- */
-export declare class Projection implements ProjectionProps {
-    /** The projection method. */
-    readonly method: ProjectionMethod;
-    /** The False Easting of the projection. */
-    readonly falseEasting?: number;
-    /** The False Northing of the projection. */
-    readonly falseNorthing?: number;
-    /** The Central Meridian. */
-    readonly centralMeridian?: number;
-    /** The latitude of origin of the projection. */
-    readonly latitudeOfOrigin?: number;
-    /** Longitude of origin of the projection. */
-    readonly longitudeOfOrigin?: number;
-    /** The scale reduction factor applied at origin. The nature of the projection has a
-     *  inherent scale factor applied that gradually varies outward from the projection origin.
-     *  The scale factor at origin enables to level the inherent scale factor over an use extent.
-     *  For the michigan variation of the Lambert Conformal Conic projection it
-     *  can be used instead or in addition to Standard Parallel to define
-     *  a scale factor.
-     */
-    readonly scaleFactor?: number;
-    /** The elevation of the origin of the projection above the geoid. This value
-     *  allows compensation for the scale factor related to elevation above the sea level.
-     */
-    readonly elevationAboveGeoid?: number;
-    /** The geoid separation. It represents the elevation of the geoid above the ellipsoid at the center of the projection. */
-    readonly geoidSeparation?: number;
-    /** The definition of the affine post-transformation for Transverse Mercator and Lambert Conformal Conic with post-affine projections */
-    readonly affine?: AffineTransform;
-    /** Standard parallel for projection that only use one.
-     *  For cylindrical projections (mercator, transverse mercator ...) it defines the parallel at
-     ** which the cylinder crosses the ellipsoid resulting in a scale factor being applied.
-     *  For conic projections (Lambert Tangential ...) it defines
-     *  the standard parallel at which the cone is tangent to the ellipsoid.
-     */
-    readonly standardParallel?: number;
-    /** The first standard parallel at which the cone crosses the ellipsoid. */
-    readonly standardParallel1?: number;
-    /** The second standard parallel at which the cone crosses the ellipsoid. */
-    readonly standardParallel2?: number;
-    /** The UTM zone number. A number from 0 to 60. */
-    readonly zoneNumber?: number;
-    /** The hemisphere for Universal Transverse Mercator projection. */
-    readonly hemisphere?: HemisphereEnum;
-    /** Longitude of the central point. */
-    readonly centralPointLongitude?: number;
-    /** Latitude of the central point. */
-    readonly centralPointLatitude?: number;
-    /** Longitude of the first alignment point for some Oblique Mercator and Krovak projections. */
-    readonly point1Longitude?: number;
-    /** Latitude of the first alignment point for some Oblique Mercator and Krovak projections. */
-    readonly point1Latitude?: number;
-    /** Longitude of the second alignment point for some Oblique Mercator projections. */
-    readonly point2Longitude?: number;
-    /** Latitude of the second alignment point for some Oblique Mercator projections. */
-    readonly point2Latitude?: number;
-    /** The Danish zone for Danish projections. */
-    readonly danishSystem34Region?: DanishSystem34Region;
-    /** Azimuth. */
-    readonly azimuth?: number;
-    constructor(_data?: ProjectionProps);
-    /** Creates a Projection from JSON representation.
-     * @public */
-    static fromJSON(data: ProjectionProps): Projection;
-    /** Creates a JSON from the Projection definition
-     * @public */
-    toJSON(): ProjectionProps;
-    /** Compares two projections. It is a strict compare operation as descriptive data is compared
-     * but a minuscule tolerance is applied to number compares.
-     *  @public */
-    equals(other: Projection): boolean;
-}
-/** A 2D cartographic point in degrees
- *  @public
- *  @extensions
- */
-export interface Carto2DDegreesProps {
-    /** Latitude value in degrees */
-    latitude: number;
-    /** Longitude value in degrees */
-    longitude: number;
-}
-/** A 2D cartographic point in degrees
- *  @public
- */
-export declare class Carto2DDegrees implements Carto2DDegreesProps {
-    /** Latitude value in degrees. Must be between -90 and +90 included */
-    private _latitude;
-    /** Returns or sets the latitude in degrees. When setting the provided number must be between or equal from -90 to 90. */
-    get latitude(): number;
-    set latitude(newLatitude: number);
-    /** Longitude value in degrees */
-    longitude: number;
-    constructor(data?: Carto2DDegreesProps);
-    /** Creates a Carto2DDegrees object from JSON representation.
-     * @public */
-    static fromJSON(data: Carto2DDegreesProps): Carto2DDegrees;
-    /** Creates a JSON from the Carto2DDegrees definition
-     * @public */
-    toJSON(): Carto2DDegreesProps;
-    /** Compares two Carto2DDegrees object. It applies a minuscule tolerance to compares.
-     *  @public */
-    equals(other: Carto2DDegrees): boolean;
-}
+/** @packageDocumentation
+ * @module Geometry
+ */
+/** This enum contains the list of all projection methods that can be represented as part of the HorizontalCRS
+ *  class. The None method indicates there is no projection and thus the CRS is longitude/latitude based
+ *  with units as degrees.
+ *  All other projection indicated a projected CRS.
+ *  @public
+ *  @extensions
+ */
+export declare type ProjectionMethod = "None" | "TransverseMercator" | "SouthOrientedTransverseMercator" | "TransverseMercatorWisconsin" | "TransverseMercatorMinnesota" | "TransverseMercatorAffine" | "MercatorStandardParallel" | "Mercator" | "UniversalTransverseMercator" | "LambertConformalConicTwoParallels" | "LambertConformalConicBelgium" | "LambertConformalConicAffine" | "LambertConformalConicWisconsin" | "LambertConformalConicMinnesota" | "LambertConformalConicMichigan" | "LambertConformalConicOneParallel" | "AlbersEqualArea" | "NewZealandNationalGrid" | "ObliqueMercator1" | "ObliqueMercator2" | "TransverseMercatorOSTN97" | "TransverseMercatorOSTN02" | "TransverseMercatorOSTN15" | "Krovak" | "KrovakModified" | "ObliqueCylindricalSwiss" | "TransverseMercatorDenmarkSystem34" | "TransverseMercatorDenmarkSystem3499" | "TransverseMercatorDenmarkSystem3401" | "Cassini" | "Sinusoidal" | "VanDerGrinten" | "Bonne" | "Mollweide" | "EckertIV" | "EckertVI" | "GoodeHomolosine" | "Robinson" | "PlateCarree" | "MillerCylindrical" | "WinkelTripel" | "AzimuthalEqualArea" | "ObliqueStereographic" | "RectifiedSkewOrthomorphicCentered" | "RectifiedSkewOrthomorphicOrigin" | "ObliqueCylindricalHungary" | "Orthographic" | "AmericanPolyconic" | "LambertEquidistantAzimuthal" | "ObliqueMercatorMinnesota";
+/** The equations are:
+ *  X1 = a1*X + a2*Y + TranslationX
+ *  Y1 = b1*X + b2*Y + translationY
+ *  An affine representing no transformation will have: a1 = 1.0, a2 = 0.0, b1 = 0.0, b2 = 1.0.
+ *  @public
+ *  @extensions
+ */
+export interface AffineTransformProps {
+    /** The X post translation */
+    translationX: number;
+    /** The Y post-translation */
+    translationY: number;
+    /** A1 value as defined in global comment. */
+    a1: number;
+    /** B1 value as defined in global comment. */
+    b1: number;
+    /** A2 value as defined in global comment. */
+    a2: number;
+    /** B2 value as defined in global comment. */
+    b2: number;
+}
+/** The equations are:
+ *  X1 = a1*X + a2*Y + TranslationX
+ *  Y1 = b1*X + b2*Y + translationY
+ *  An affine representing no transformation will have: a1 = 1.0, a2 = 0.0, b1 = 0.0, b2 = 1.0.
+ *  @public
+ */
+export declare class AffineTransform implements AffineTransformProps {
+    /** The X post translation */
+    readonly translationX: number;
+    /** The Y post-translation */
+    readonly translationY: number;
+    /** A1 value as defined in global comment. */
+    readonly a1: number;
+    /** B1 value as defined in global comment. */
+    readonly b1: number;
+    /** A2 value as defined in global comment. */
+    readonly a2: number;
+    /** B2 value as defined in global comment. */
+    readonly b2: number;
+    constructor(data?: AffineTransformProps);
+    /** Creates an Affine Transform from JSON representation.
+     * @public */
+    static fromJSON(data: AffineTransformProps): AffineTransform;
+    /** Creates a JSON from the Affine Transform definition
+     * @public */
+    toJSON(): AffineTransformProps;
+    /** Compares two Affine Transforms. It applies a minuscule tolerance for number compares
+     *  @public */
+    equals(other: AffineTransform): boolean;
+}
+/** Type used in the definition of UTM Zoning projection. This projection only requires a zone number and
+ *  the hemisphere North or South.
+ *  @public
+ *  @extensions
+ */
+export declare type HemisphereEnum = "South" | "North";
+/** The type to define the three zones of the Danish System 34 projections.
+ *  @public
+ * @extensions
+ */
+export declare type DanishSystem34Region = "Jylland" | "Sjaelland" | "Bornholm";
+/** This class encapsulates the projection of the CRS. The projection relies on a projection method
+ *  and a set of projection parameters specific to projection method selected.
+ *  @public
+ *  @extensions
+ */
+export interface ProjectionProps {
+    /** The projection method. */
+    method: ProjectionMethod;
+    /** The False Easting of the projection. */
+    falseEasting?: number;
+    /** The False Northing of the projection. */
+    falseNorthing?: number;
+    /** The Central Meridian. */
+    centralMeridian?: number;
+    /** The latitude of origin of the projection. */
+    latitudeOfOrigin?: number;
+    /** Longitude of origin of the projection. */
+    longitudeOfOrigin?: number;
+    /** The scale reduction factor applied at origin. The nature of the projection has a
+     *  inherent scale factor applied that gradually varies outward from the projection origin.
+     *  The scale factor at origin enables to level the inherent scale factor over an use extent.
+     *  For the michigan variation of the Lambert Conformal Conic projection it
+     *  can be used instead or in addition to Standard Parallel to define
+     *  a scale factor.
+     */
+    scaleFactor?: number;
+    /** The elevation of the origin of the projection above the geoid. This value
+     *  allows compensation for the scale factor related to elevation above the sea level.
+     */
+    elevationAboveGeoid?: number;
+    /** The geoid separation. It represents the elevation of the geoid above the ellipsoid at the center of the projection. */
+    geoidSeparation?: number;
+    /** The definition of the affine post-transformation for Transverse Mercator and Lambert Conformal Conic with post-affine projections */
+    affine?: AffineTransformProps;
+    /** Standard parallel for projection that only use one.
+     *  For cylindrical projections (mercator, transverse mercator ...) it defines the parallel at
+     *  which the cylinder crosses the ellipsoid resulting in a scale factor being applied.
+     *  For conic projections (Lambert Tangential ...) it defines
+     *  the standard parallel at which the cone is tangent to the ellipsoid.
+     */
+    standardParallel?: number;
+    /** The first standard parallel at which the cone crosses the ellipsoid. */
+    standardParallel1?: number;
+    /** The second standard parallel at which the cone crosses the ellipsoid. */
+    standardParallel2?: number;
+    /** The UTM zone number. A number from 0 to 60. */
+    zoneNumber?: number;
+    /** The hemisphere for Universal Transverse Mercator projection. */
+    hemisphere?: HemisphereEnum;
+    /** Longitude of the central point. */
+    centralPointLongitude?: number;
+    /** Latitude of the central point. */
+    centralPointLatitude?: number;
+    /** Longitude of the first alignment point for some Oblique Mercator and Krovak projections. */
+    point1Longitude?: number;
+    /** Latitude of the first alignment point for some Oblique Mercator and Krovak projections. */
+    point1Latitude?: number;
+    /** Longitude of the second alignment point for some Oblique Mercator projections. */
+    point2Longitude?: number;
+    /** Latitude of the second alignment point for some Oblique Mercator projections. */
+    point2Latitude?: number;
+    /** The Danish zone for Danish projections. */
+    danishSystem34Region?: DanishSystem34Region;
+    /** Azimuth. */
+    azimuth?: number;
+}
+/** This class encapsulates the projection of the CRS. The projection relies on a projection method and a set
+ *  of projection parameters specific to projection method selected to flatten the surface of the model of the Earth
+ *  defines as a geodetic ellipsoid. The flattening and the distortion angular, linear, scale from the process varies between methods.
+ *  Refer to appropriate external documentation for details.
+ *  @note Various property sets are required for specific projection methods. The current class implementation does not enforce
+ *        these rules yet and it is possible to define or not define any property regardless the method used.
+ *  @public
+ */
+export declare class Projection implements ProjectionProps {
+    /** The projection method. */
+    readonly method: ProjectionMethod;
+    /** The False Easting of the projection. */
+    readonly falseEasting?: number;
+    /** The False Northing of the projection. */
+    readonly falseNorthing?: number;
+    /** The Central Meridian. */
+    readonly centralMeridian?: number;
+    /** The latitude of origin of the projection. */
+    readonly latitudeOfOrigin?: number;
+    /** Longitude of origin of the projection. */
+    readonly longitudeOfOrigin?: number;
+    /** The scale reduction factor applied at origin. The nature of the projection has a
+     *  inherent scale factor applied that gradually varies outward from the projection origin.
+     *  The scale factor at origin enables to level the inherent scale factor over an use extent.
+     *  For the michigan variation of the Lambert Conformal Conic projection it
+     *  can be used instead or in addition to Standard Parallel to define
+     *  a scale factor.
+     */
+    readonly scaleFactor?: number;
+    /** The elevation of the origin of the projection above the geoid. This value
+     *  allows compensation for the scale factor related to elevation above the sea level.
+     */
+    readonly elevationAboveGeoid?: number;
+    /** The geoid separation. It represents the elevation of the geoid above the ellipsoid at the center of the projection. */
+    readonly geoidSeparation?: number;
+    /** The definition of the affine post-transformation for Transverse Mercator and Lambert Conformal Conic with post-affine projections */
+    readonly affine?: AffineTransform;
+    /** Standard parallel for projection that only use one.
+     *  For cylindrical projections (mercator, transverse mercator ...) it defines the parallel at
+     ** which the cylinder crosses the ellipsoid resulting in a scale factor being applied.
+     *  For conic projections (Lambert Tangential ...) it defines
+     *  the standard parallel at which the cone is tangent to the ellipsoid.
+     */
+    readonly standardParallel?: number;
+    /** The first standard parallel at which the cone crosses the ellipsoid. */
+    readonly standardParallel1?: number;
+    /** The second standard parallel at which the cone crosses the ellipsoid. */
+    readonly standardParallel2?: number;
+    /** The UTM zone number. A number from 0 to 60. */
+    readonly zoneNumber?: number;
+    /** The hemisphere for Universal Transverse Mercator projection. */
+    readonly hemisphere?: HemisphereEnum;
+    /** Longitude of the central point. */
+    readonly centralPointLongitude?: number;
+    /** Latitude of the central point. */
+    readonly centralPointLatitude?: number;
+    /** Longitude of the first alignment point for some Oblique Mercator and Krovak projections. */
+    readonly point1Longitude?: number;
+    /** Latitude of the first alignment point for some Oblique Mercator and Krovak projections. */
+    readonly point1Latitude?: number;
+    /** Longitude of the second alignment point for some Oblique Mercator projections. */
+    readonly point2Longitude?: number;
+    /** Latitude of the second alignment point for some Oblique Mercator projections. */
+    readonly point2Latitude?: number;
+    /** The Danish zone for Danish projections. */
+    readonly danishSystem34Region?: DanishSystem34Region;
+    /** Azimuth. */
+    readonly azimuth?: number;
+    constructor(_data?: ProjectionProps);
+    /** Creates a Projection from JSON representation.
+     * @public */
+    static fromJSON(data: ProjectionProps): Projection;
+    /** Creates a JSON from the Projection definition
+     * @public */
+    toJSON(): ProjectionProps;
+    /** Compares two projections. It is a strict compare operation as descriptive data is compared
+     * but a minuscule tolerance is applied to number compares.
+     *  @public */
+    equals(other: Projection): boolean;
+}
+/** A 2D cartographic point in degrees
+ *  @public
+ *  @extensions
+ */
+export interface Carto2DDegreesProps {
+    /** Latitude value in degrees */
+    latitude: number;
+    /** Longitude value in degrees */
+    longitude: number;
+}
+/** A 2D cartographic point in degrees
+ *  @public
+ */
+export declare class Carto2DDegrees implements Carto2DDegreesProps {
+    /** Latitude value in degrees. Must be between -90 and +90 included */
+    private _latitude;
+    /** Returns or sets the latitude in degrees. When setting the provided number must be between or equal from -90 to 90. */
+    get latitude(): number;
+    set latitude(newLatitude: number);
+    /** Longitude value in degrees */
+    longitude: number;
+    constructor(data?: Carto2DDegreesProps);
+    /** Creates a Carto2DDegrees object from JSON representation.
+     * @public */
+    static fromJSON(data: Carto2DDegreesProps): Carto2DDegrees;
+    /** Creates a JSON from the Carto2DDegrees definition
+     * @public */
+    toJSON(): Carto2DDegreesProps;
+    /** Compares two Carto2DDegrees object. It applies a minuscule tolerance to compares.
+     *  @public */
+    equals(other: Carto2DDegrees): boolean;
+}
 //# sourceMappingURL=Projection.d.ts.map