@itwin/core-common 3.4.0-dev.50 → 3.4.0-dev.55

package/lib/esm/geometry/CoordinateReferenceSystem.d.ts

@@ -1,270 +1,270 @@
-/** @packageDocumentation
- * @module Geometry
- */
-import { GeodeticDatum, GeodeticDatumProps } from "./GeodeticDatum";
-import { GeodeticEllipsoid, GeodeticEllipsoidProps } from "./GeodeticEllipsoid";
-import { Carto2DDegrees, Carto2DDegreesProps, Projection, ProjectionProps } from "./Projection";
-import { AdditionalTransform, AdditionalTransformProps } from "./AdditionalTransform";
-/** This type indicates possible linear and angular units supported.
- *  @public
- *  @extensions
-*/
-export declare type UnitType = "Meter" | "InternationalFoot" | "USSurveyFoot" | "Degree" | "Unsupported";
-/** The extent in latitude, longitude bounds where a horizontal CRS is applicable
- *  @public
- *  @extensions
-*/
-export interface HorizontalCRSExtentProps {
-    /** The South West point in latitude and longitude in degrees for the user-defined extent of the CRS */
-    southWest: Carto2DDegreesProps;
-    /** The North East point in latitude in longitude in degrees for the user-defined extent of the CRS.
-       The latitude of the North East must be greater or equal to the latitude of the South West point
-       It is possible, however, for the longitude of the South West corner to have greater value than the
-       longitude of the North East point such as when the west longitude is located on the other side
-       of the -180/180 degree longitude line.*/
-    northEast: Carto2DDegreesProps;
-}
-/** The extent in latitude, longitude bounds where a horizontal CRS is applicable
- *  @public
- */
-export declare class HorizontalCRSExtent implements HorizontalCRSExtentProps {
-    /** The latitude minimum and maximum for the user-defined extent of the CRS */
-    readonly southWest: Carto2DDegrees;
-    /** The North East point in latitude in longitude in degrees for the user-defined extent of the CRS.
-       The latitude of the North East must be greater or equal to the latitude of the South West point
-       It is possible, however, for the longitude of the South West corner to have greater value than the
-       longitude of the North East point such as when the west longitude is located on the other side
-       of the -180/180 degree longitude line.*/
-    readonly northEast: Carto2DDegrees;
-    constructor(data?: HorizontalCRSExtentProps);
-    /** Creates an extent object from JSON representation.
-     * @public */
-    static fromJSON(data: HorizontalCRSExtentProps): HorizontalCRSExtent;
-    /** Creates a JSON from the Extent definition
-     * @public */
-    toJSON(): HorizontalCRSExtentProps;
-    /** Compares two Extents. It applies a minuscule tolerance to comparing numbers.
-     *  @public */
-    equals(other: HorizontalCRSExtent): boolean;
-}
-/** Horizontal Geographic Coordinate Reference System definition
- *  @public
- *  @extensions
- */
-export interface HorizontalCRSProps {
-    /** The identifier of the horizontal CRS as stored in the dictionary or the service database */
-    id?: string;
-    /** Used only for user-defined definitions that will typically use a GUID as id. A display name for the CRS that allows
-     *  a human to understand the nature of the definition
-     */
-    name?: string;
-    /** Description */
-    description?: string;
-    /** A textual description of the source of the CRS definition. */
-    source?: string;
-    /** If true then indicates the definition is deprecated. It should then be used for backward compatibility only.
-     *  If false or undefined then the definition is not deprecated.
-     */
-    deprecated?: boolean;
-    /** The EPSG code of the CRS. If undefined then there is no EPSG code associated. */
-    epsg?: number;
-    /** The identifier of the geodetic datum as stored in the dictionary or the service database. */
-    datumId?: string;
-    /** The complete definition of the geodetic datum referred to by datumId. It can also be used if the datum is not stored
-     *  in either service or dictionary.
-     */
-    datum?: GeodeticDatumProps;
-    /** The identifier of the geodetic ellipsoid as stored in the dictionary or the service database. This property is exclusive
-     * of having datumId and datum properties undefined.
-    */
-    ellipsoidId?: string;
-    /** The complete definition of the geodetic datum referred to by datumId. It can also be used if the datum is not stored
-     *  in either service or dictionary
-     */
-    ellipsoid?: GeodeticEllipsoidProps;
-    /** The text indicating the unit used. */
-    unit?: UnitType;
-    /** Projection including projection parameters. */
-    projection?: ProjectionProps;
-    /** Extent representing the domain of application of the CRS. */
-    extent?: HorizontalCRSExtentProps;
-}
-/** Horizontal Geographic Coordinate reference System implementation.
- *  An horizontal CRS defines the portion which is horizontal to the Earth surface (within the deformation brought by the projection process).
- *  There are two major classes of Horizontal Coordinate Reference Systems:
- *  - The projected CRS which rely on a projection to flatten the coordinate system space into axises using linear
- *    units (meter, US Survey Feet, ...) relative to some origin.
- *  - The non projected CRS (also named geographic CRS by EPSG nomenclature) that does
- *    not require a projection (projection method = None) and horizontal coordinates are expressed
- *    as longitude and latitude (see [[Cartographic]])
- *  Horizontal Coordinate Systems rely on a projection to flatten the surface of an ellipsoid (see [[GeodeticEllipsoid]]) which is
- *  the mathematical model of the Earth surface.
- *  Explanations in more details of the various concepts can be obtained from other sources including the page on the subject
- *  on itwinJS.org (see https://www.itwinjs.org/learning/geolocation/?term=coordinate+system).
- *  A few details are still required to grasp the model. Geographic Coordinate Reference Systems rely on the concept of geodetic datums
- *  (see [[GeodeticDatum]]) to convert latitude/longitude from one frame of reference to another. Such geodetic datum will bind the ellipsoid
- *  and possibly define transformation steps required to convert from the currently used geodetic datum to the common datum WGS84
- *  used for worldwide data (such as most popular imagery data sources). If there are no rules established to convert to WGS84
- *  or if those rules are secret then the horizontal CRS can be datum-less and must make direct use of the ellipsoid
- *  to define the earth surface.
- *  For this purpose either the geodetic datum must be specified using either datumId or datum properties or both. If
- *  both these values are undefined then it is possible to define the ellipsoid using properties ellipsoidId or ellipsoid or both.
- *  These two pairs of properties are mutually exclusive with datum related properties having precedence. If a datum or datumId is set then
- *  ellipsoid properties will automatically be undefined. If datumId or datum is defined then attempts to set ellipsoidId or ellipsoid
- *  will fail silently, the values remaining undefined. The ellipsoidId will not be a repeat of the ellipsoidId property part of the
- *  geodetic datum definition.
- *  @public
- */
-export declare class HorizontalCRS implements HorizontalCRSProps {
-    /** The identifier of the horizontal CRS as stored in the dictionary or the service database */
-    readonly id?: string;
-    /** Used only for user-defined definitions that will typically use a GUID as id. A display name for the CRS that allows
-     ** a human to understand the nature of the definition
-     */
-    readonly name?: string;
-    /** Description */
-    readonly description?: string;
-    /** The source of the CRS definition. */
-    readonly source?: string;
-    /** If true then indicates the definition is deprecated. It should then be used for backward compatibility only.
-     *  If false then the definition is not deprecated. Default is false.
-     */
-    readonly deprecated: boolean;
-    /** The EPSG code of the CRS. If undefined then there is no EPSG code associated. */
-    readonly epsg?: number;
-    /** The identifier of the geodetic datum as stored in the dictionary or the service database. */
-    readonly datumId?: string;
-    /** The complete definition of the geodetic datum referred to by datumId. It can also be used if the datum is not stored
-     *  in either service or dictionary.
-     */
-    readonly datum?: GeodeticDatum;
-    /** The identifier of the geodetic ellipsoid as stored in the dictionary or the service database. This property is exclusive
-     *  of having datumId and datum properties undefined.
-    */
-    readonly ellipsoidId?: string;
-    /** The complete definition of the geodetic ellipsoid referred to by ellipsoidId. It can also be used if the ellipsoid is not stored
-     *  in either service or dictionary. This property is exclusive
-     *  of having datumId and datum properties undefined.
-    */
-    readonly ellipsoid?: GeodeticEllipsoid;
-    /** The text indicating the unit used. */
-    readonly unit?: UnitType;
-    /** Projection including projection parameters. */
-    readonly projection?: Projection;
-    /** Extent representing the domain of application of the CRS. */
-    readonly extent?: HorizontalCRSExtent;
-    constructor(_data?: HorizontalCRSProps);
-    /** Creates an Horizontal CRS from JSON representation.
-     * @public */
-    static fromJSON(data: HorizontalCRSProps): HorizontalCRS;
-    /** Creates a JSON from the Horizontal CRS definition
-     * @public */
-    toJSON(): HorizontalCRSProps;
-    /** Compares two horizontal CRS. It is not an equivalence test as descriptive properties are also compared
-     * but number compares are applied a minuscule tolerance.
-     *  @public */
-    equals(other: HorizontalCRS): boolean;
-}
-/** Vertical Geographic Coordinate reference System definition
- * @public
- * @extensions
- */
-export interface VerticalCRSProps {
-    /** Vertical CRS Key name.
-     * @see [[VerticalCRS.id]]
-     */
-    id: "GEOID" | "ELLIPSOID" | "NGVD29" | "NAVD88" | "LOCAL_ELLIPSOID";
-}
-/** Vertical Coordinate reference System implementation.
- *  The VerticalCRS contains currently a single identifier property of string type. Although
- *  we currently only support five distinct key values "GEOID", "ELLIPSOID", "NAVD88", "NGVD29" and "LOCAL_ELLIPSOID"
- *  we expect to support a broader set in the future including, eventually, user defined vertical CRS
- *  which will require additional parameters to be added.
- *  @public
-*/
-export declare class VerticalCRS implements VerticalCRSProps {
-    /** Vertical CRS Key name. The only supported values are currently "GEOID", "ELLIPSOID", "NAVD88", "NGVD29" and "LOCAL_ELLIPSOID".
-     *  GEOID indicates elevations are to be interpreted relative to the local Geoid of the dataset. It can also be considered to be Mean Sea Level.
-     *  NAVD88 is the local geoid model for the USA. This vertical datum can only be used if the horizontal portion is based on a
-     *         datum variation of NAD83, NAD27, NSRS2007 and NSRS2011.
-     *  NGVD29 is the former local geoid model for the USA. This vertical datum can only be used if the horizontal portion is based on a
-     *         datum variation of NAD83, NAD27, NSRS2007 and NSRS2011.
-     *  ELLIPSOID indicates that elevations are relative to the surface of the WGS84(or current coincident) ellipsoid.
-     *  LOCAL_ELLIPSOID indicates that elevations are relative to the surface of the local ellipsoid used by the horizontal CRS. It can only
-     *         be used for datums that are not considered coincident vertically with WGS84. Use of this vertical datum is strongly discouraged.
-    */
-    readonly id: "GEOID" | "ELLIPSOID" | "NGVD29" | "NAVD88" | "LOCAL_ELLIPSOID";
-    constructor(data?: VerticalCRSProps);
-    /** Creates a Vertical CRS from JSON representation.
-     * @public */
-    static fromJSON(data: VerticalCRSProps): VerticalCRS;
-    /** Creates a JSON from the Vertical CRS definition
-     * @public */
-    toJSON(): VerticalCRSProps;
-    /** Compares two vertical CRS.
-     *  @public */
-    equals(other: VerticalCRS): boolean;
-}
-/** Geographic Coordinate Reference System definition that includes the horizontal and vertical definitions as well as an optional
- *  additional transformation.
- *  @see [[GeographicCRS]].
- *  @public
- *  @extensions
- */
-export interface GeographicCRSProps {
-    /** The horizontal portion of the geographic coordinate reference system. */
-    horizontalCRS?: HorizontalCRSProps;
-    /** The vertical portion of the geographic coordinate reference system. */
-    verticalCRS?: VerticalCRSProps;
-    /** The optional additional transform the geographic coordinate reference system. */
-    additionalTransform?: AdditionalTransformProps;
-}
-/** Geographic Coordinate Reference System implementation. This is the class that indicates the definition of a Geographic
- *  coordinate reference system comprised of three components: Horizontal and Vertical and an optional additional transform.
- *  The vertical component (see [[VerticalCRS]]) is the simplest portion containing a simple identifier as a string.
- *  The optional additional transform of which, currently, only the type Helmert 2D with Z offset [[Helmert2DWithZOffset]] is supported
- *  defines a transformation of x,y, and z cartesian coordinate of the projection to the final
- *  Geographic Coordinate Reference System cartesian coordinates.
- *  The horizontal component contains a list of identification and documentation properties as well as
- *  defining details possibly including the projection with method and parameters, the definition of the datum, ellipsoid, extent and so on.
- *  The principle of describing a Geographic CRS is that the definition may be incomplete. The whole set of classes related to geographic
- *  coordinate reference system classes ([[GeodeticEllipsoid]], [[GeodeticDatum]], [[Projection]], [[GeodeticTransform]], ...) are designed
- *  so that they can be parsed from incomplete JSON fragments, or produce incomplete JSON fragments such as would be
- *  generated from a request to a REST API to a server when select OData clauses are used.
- *  Often GeographicCRS would knowingly be created incomplete but with sufficient information to perform conversion from some
- *  reprojection engine (the present set of classes do not provide any GeographicCRS conversion).
- *  For example the following definitions are quite sufficient to request conversion to or from by a reprojection engine:
- *  { horizontalCRS: {id: "LL84"}, verticalCRS: {id:"GEOID"}
- *  or
- *  { horizontalCRS: {datumId: "WGS84", projection: {method: "None"}}, verticalCRS: "ELLIPSOID"}
- *  The reprojection engine will use the engine internal dictionary to obtain the details if it can.
- *  Some definitions will originate from other sources (a parsed WKT for example) and the reprojection engine will require
- *  all mathematical and operational details to perform any conversion (descriptive information are ignored in the conversion process).
- *  @note see important detailed explanation in the [[HorizontalCRS]], [[VerticalCRS]] and [[AdditionalTransform]] documentation.
- *  @note Earth Centered, Earth Fixed coordinate system (ECEF) is a full 3D cartesian system that unambiguously
- *        expressed coordinates relative to the Earth Center. Since there is no horizontal portion independent from
- *        the vertical portion this system cannot be represented by a GeographicCRS and remains a separate concept.
- *  @public
-*/
-export declare class GeographicCRS implements GeographicCRSProps {
-    /** The horizontal portion of the geographic coordinate reference system. */
-    readonly horizontalCRS?: HorizontalCRS;
-    /** The vertical portion of the geographic coordinate reference system. */
-    readonly verticalCRS?: VerticalCRS;
-    /** The optional additional transform the geographic coordinate reference system. */
-    readonly additionalTransform?: AdditionalTransform;
-    constructor(data?: GeographicCRSProps);
-    /** Creates a Geographic CRS from JSON representation.
-     * @public */
-    static fromJSON(data: GeographicCRSProps): GeographicCRS;
-    /** Creates a JSON from the Geographic CRS definition
-     * @public */
-    toJSON(): GeographicCRSProps;
-    /** Compares two Geographic CRS. It is a strict compare operation not an equivalence test though
-     * number compares are applied a minuscule tolerance.
-     * It takes into account descriptive properties not only mathematical definition properties.
-     * @public
-     */
-    equals(other: GeographicCRS): boolean;
-}
+/** @packageDocumentation
+ * @module Geometry
+ */
+import { GeodeticDatum, GeodeticDatumProps } from "./GeodeticDatum";
+import { GeodeticEllipsoid, GeodeticEllipsoidProps } from "./GeodeticEllipsoid";
+import { Carto2DDegrees, Carto2DDegreesProps, Projection, ProjectionProps } from "./Projection";
+import { AdditionalTransform, AdditionalTransformProps } from "./AdditionalTransform";
+/** This type indicates possible linear and angular units supported.
+ *  @public
+ *  @extensions
+*/
+export declare type UnitType = "Meter" | "InternationalFoot" | "USSurveyFoot" | "Degree" | "Unsupported";
+/** The extent in latitude, longitude bounds where a horizontal CRS is applicable
+ *  @public
+ *  @extensions
+*/
+export interface HorizontalCRSExtentProps {
+    /** The South West point in latitude and longitude in degrees for the user-defined extent of the CRS */
+    southWest: Carto2DDegreesProps;
+    /** The North East point in latitude in longitude in degrees for the user-defined extent of the CRS.
+       The latitude of the North East must be greater or equal to the latitude of the South West point
+       It is possible, however, for the longitude of the South West corner to have greater value than the
+       longitude of the North East point such as when the west longitude is located on the other side
+       of the -180/180 degree longitude line.*/
+    northEast: Carto2DDegreesProps;
+}
+/** The extent in latitude, longitude bounds where a horizontal CRS is applicable
+ *  @public
+ */
+export declare class HorizontalCRSExtent implements HorizontalCRSExtentProps {
+    /** The latitude minimum and maximum for the user-defined extent of the CRS */
+    readonly southWest: Carto2DDegrees;
+    /** The North East point in latitude in longitude in degrees for the user-defined extent of the CRS.
+       The latitude of the North East must be greater or equal to the latitude of the South West point
+       It is possible, however, for the longitude of the South West corner to have greater value than the
+       longitude of the North East point such as when the west longitude is located on the other side
+       of the -180/180 degree longitude line.*/
+    readonly northEast: Carto2DDegrees;
+    constructor(data?: HorizontalCRSExtentProps);
+    /** Creates an extent object from JSON representation.
+     * @public */
+    static fromJSON(data: HorizontalCRSExtentProps): HorizontalCRSExtent;
+    /** Creates a JSON from the Extent definition
+     * @public */
+    toJSON(): HorizontalCRSExtentProps;
+    /** Compares two Extents. It applies a minuscule tolerance to comparing numbers.
+     *  @public */
+    equals(other: HorizontalCRSExtent): boolean;
+}
+/** Horizontal Geographic Coordinate Reference System definition
+ *  @public
+ *  @extensions
+ */
+export interface HorizontalCRSProps {
+    /** The identifier of the horizontal CRS as stored in the dictionary or the service database */
+    id?: string;
+    /** Used only for user-defined definitions that will typically use a GUID as id. A display name for the CRS that allows
+     *  a human to understand the nature of the definition
+     */
+    name?: string;
+    /** Description */
+    description?: string;
+    /** A textual description of the source of the CRS definition. */
+    source?: string;
+    /** If true then indicates the definition is deprecated. It should then be used for backward compatibility only.
+     *  If false or undefined then the definition is not deprecated.
+     */
+    deprecated?: boolean;
+    /** The EPSG code of the CRS. If undefined then there is no EPSG code associated. */
+    epsg?: number;
+    /** The identifier of the geodetic datum as stored in the dictionary or the service database. */
+    datumId?: string;
+    /** The complete definition of the geodetic datum referred to by datumId. It can also be used if the datum is not stored
+     *  in either service or dictionary.
+     */
+    datum?: GeodeticDatumProps;
+    /** The identifier of the geodetic ellipsoid as stored in the dictionary or the service database. This property is exclusive
+     * of having datumId and datum properties undefined.
+    */
+    ellipsoidId?: string;
+    /** The complete definition of the geodetic datum referred to by datumId. It can also be used if the datum is not stored
+     *  in either service or dictionary
+     */
+    ellipsoid?: GeodeticEllipsoidProps;
+    /** The text indicating the unit used. */
+    unit?: UnitType;
+    /** Projection including projection parameters. */
+    projection?: ProjectionProps;
+    /** Extent representing the domain of application of the CRS. */
+    extent?: HorizontalCRSExtentProps;
+}
+/** Horizontal Geographic Coordinate reference System implementation.
+ *  An horizontal CRS defines the portion which is horizontal to the Earth surface (within the deformation brought by the projection process).
+ *  There are two major classes of Horizontal Coordinate Reference Systems:
+ *  - The projected CRS which rely on a projection to flatten the coordinate system space into axises using linear
+ *    units (meter, US Survey Feet, ...) relative to some origin.
+ *  - The non projected CRS (also named geographic CRS by EPSG nomenclature) that does
+ *    not require a projection (projection method = None) and horizontal coordinates are expressed
+ *    as longitude and latitude (see [[Cartographic]])
+ *  Horizontal Coordinate Systems rely on a projection to flatten the surface of an ellipsoid (see [[GeodeticEllipsoid]]) which is
+ *  the mathematical model of the Earth surface.
+ *  Explanations in more details of the various concepts can be obtained from other sources including the page on the subject
+ *  on itwinJS.org (see https://www.itwinjs.org/learning/geolocation/?term=coordinate+system).
+ *  A few details are still required to grasp the model. Geographic Coordinate Reference Systems rely on the concept of geodetic datums
+ *  (see [[GeodeticDatum]]) to convert latitude/longitude from one frame of reference to another. Such geodetic datum will bind the ellipsoid
+ *  and possibly define transformation steps required to convert from the currently used geodetic datum to the common datum WGS84
+ *  used for worldwide data (such as most popular imagery data sources). If there are no rules established to convert to WGS84
+ *  or if those rules are secret then the horizontal CRS can be datum-less and must make direct use of the ellipsoid
+ *  to define the earth surface.
+ *  For this purpose either the geodetic datum must be specified using either datumId or datum properties or both. If
+ *  both these values are undefined then it is possible to define the ellipsoid using properties ellipsoidId or ellipsoid or both.
+ *  These two pairs of properties are mutually exclusive with datum related properties having precedence. If a datum or datumId is set then
+ *  ellipsoid properties will automatically be undefined. If datumId or datum is defined then attempts to set ellipsoidId or ellipsoid
+ *  will fail silently, the values remaining undefined. The ellipsoidId will not be a repeat of the ellipsoidId property part of the
+ *  geodetic datum definition.
+ *  @public
+ */
+export declare class HorizontalCRS implements HorizontalCRSProps {
+    /** The identifier of the horizontal CRS as stored in the dictionary or the service database */
+    readonly id?: string;
+    /** Used only for user-defined definitions that will typically use a GUID as id. A display name for the CRS that allows
+     ** a human to understand the nature of the definition
+     */
+    readonly name?: string;
+    /** Description */
+    readonly description?: string;
+    /** The source of the CRS definition. */
+    readonly source?: string;
+    /** If true then indicates the definition is deprecated. It should then be used for backward compatibility only.
+     *  If false then the definition is not deprecated. Default is false.
+     */
+    readonly deprecated: boolean;
+    /** The EPSG code of the CRS. If undefined then there is no EPSG code associated. */
+    readonly epsg?: number;
+    /** The identifier of the geodetic datum as stored in the dictionary or the service database. */
+    readonly datumId?: string;
+    /** The complete definition of the geodetic datum referred to by datumId. It can also be used if the datum is not stored
+     *  in either service or dictionary.
+     */
+    readonly datum?: GeodeticDatum;
+    /** The identifier of the geodetic ellipsoid as stored in the dictionary or the service database. This property is exclusive
+     *  of having datumId and datum properties undefined.
+    */
+    readonly ellipsoidId?: string;
+    /** The complete definition of the geodetic ellipsoid referred to by ellipsoidId. It can also be used if the ellipsoid is not stored
+     *  in either service or dictionary. This property is exclusive
+     *  of having datumId and datum properties undefined.
+    */
+    readonly ellipsoid?: GeodeticEllipsoid;
+    /** The text indicating the unit used. */
+    readonly unit?: UnitType;
+    /** Projection including projection parameters. */
+    readonly projection?: Projection;
+    /** Extent representing the domain of application of the CRS. */
+    readonly extent?: HorizontalCRSExtent;
+    constructor(_data?: HorizontalCRSProps);
+    /** Creates an Horizontal CRS from JSON representation.
+     * @public */
+    static fromJSON(data: HorizontalCRSProps): HorizontalCRS;
+    /** Creates a JSON from the Horizontal CRS definition
+     * @public */
+    toJSON(): HorizontalCRSProps;
+    /** Compares two horizontal CRS. It is not an equivalence test as descriptive properties are also compared
+     * but number compares are applied a minuscule tolerance.
+     *  @public */
+    equals(other: HorizontalCRS): boolean;
+}
+/** Vertical Geographic Coordinate reference System definition
+ * @public
+ * @extensions
+ */
+export interface VerticalCRSProps {
+    /** Vertical CRS Key name.
+     * @see [[VerticalCRS.id]]
+     */
+    id: "GEOID" | "ELLIPSOID" | "NGVD29" | "NAVD88" | "LOCAL_ELLIPSOID";
+}
+/** Vertical Coordinate reference System implementation.
+ *  The VerticalCRS contains currently a single identifier property of string type. Although
+ *  we currently only support five distinct key values "GEOID", "ELLIPSOID", "NAVD88", "NGVD29" and "LOCAL_ELLIPSOID"
+ *  we expect to support a broader set in the future including, eventually, user defined vertical CRS
+ *  which will require additional parameters to be added.
+ *  @public
+*/
+export declare class VerticalCRS implements VerticalCRSProps {
+    /** Vertical CRS Key name. The only supported values are currently "GEOID", "ELLIPSOID", "NAVD88", "NGVD29" and "LOCAL_ELLIPSOID".
+     *  GEOID indicates elevations are to be interpreted relative to the local Geoid of the dataset. It can also be considered to be Mean Sea Level.
+     *  NAVD88 is the local geoid model for the USA. This vertical datum can only be used if the horizontal portion is based on a
+     *         datum variation of NAD83, NAD27, NSRS2007 and NSRS2011.
+     *  NGVD29 is the former local geoid model for the USA. This vertical datum can only be used if the horizontal portion is based on a
+     *         datum variation of NAD83, NAD27, NSRS2007 and NSRS2011.
+     *  ELLIPSOID indicates that elevations are relative to the surface of the WGS84(or current coincident) ellipsoid.
+     *  LOCAL_ELLIPSOID indicates that elevations are relative to the surface of the local ellipsoid used by the horizontal CRS. It can only
+     *         be used for datums that are not considered coincident vertically with WGS84. Use of this vertical datum is strongly discouraged.
+    */
+    readonly id: "GEOID" | "ELLIPSOID" | "NGVD29" | "NAVD88" | "LOCAL_ELLIPSOID";
+    constructor(data?: VerticalCRSProps);
+    /** Creates a Vertical CRS from JSON representation.
+     * @public */
+    static fromJSON(data: VerticalCRSProps): VerticalCRS;
+    /** Creates a JSON from the Vertical CRS definition
+     * @public */
+    toJSON(): VerticalCRSProps;
+    /** Compares two vertical CRS.
+     *  @public */
+    equals(other: VerticalCRS): boolean;
+}
+/** Geographic Coordinate Reference System definition that includes the horizontal and vertical definitions as well as an optional
+ *  additional transformation.
+ *  @see [[GeographicCRS]].
+ *  @public
+ *  @extensions
+ */
+export interface GeographicCRSProps {
+    /** The horizontal portion of the geographic coordinate reference system. */
+    horizontalCRS?: HorizontalCRSProps;
+    /** The vertical portion of the geographic coordinate reference system. */
+    verticalCRS?: VerticalCRSProps;
+    /** The optional additional transform the geographic coordinate reference system. */
+    additionalTransform?: AdditionalTransformProps;
+}
+/** Geographic Coordinate Reference System implementation. This is the class that indicates the definition of a Geographic
+ *  coordinate reference system comprised of three components: Horizontal and Vertical and an optional additional transform.
+ *  The vertical component (see [[VerticalCRS]]) is the simplest portion containing a simple identifier as a string.
+ *  The optional additional transform of which, currently, only the type Helmert 2D with Z offset [[Helmert2DWithZOffset]] is supported
+ *  defines a transformation of x,y, and z cartesian coordinate of the projection to the final
+ *  Geographic Coordinate Reference System cartesian coordinates.
+ *  The horizontal component contains a list of identification and documentation properties as well as
+ *  defining details possibly including the projection with method and parameters, the definition of the datum, ellipsoid, extent and so on.
+ *  The principle of describing a Geographic CRS is that the definition may be incomplete. The whole set of classes related to geographic
+ *  coordinate reference system classes ([[GeodeticEllipsoid]], [[GeodeticDatum]], [[Projection]], [[GeodeticTransform]], ...) are designed
+ *  so that they can be parsed from incomplete JSON fragments, or produce incomplete JSON fragments such as would be
+ *  generated from a request to a REST API to a server when select OData clauses are used.
+ *  Often GeographicCRS would knowingly be created incomplete but with sufficient information to perform conversion from some
+ *  reprojection engine (the present set of classes do not provide any GeographicCRS conversion).
+ *  For example the following definitions are quite sufficient to request conversion to or from by a reprojection engine:
+ *  { horizontalCRS: {id: "LL84"}, verticalCRS: {id:"GEOID"}
+ *  or
+ *  { horizontalCRS: {datumId: "WGS84", projection: {method: "None"}}, verticalCRS: "ELLIPSOID"}
+ *  The reprojection engine will use the engine internal dictionary to obtain the details if it can.
+ *  Some definitions will originate from other sources (a parsed WKT for example) and the reprojection engine will require
+ *  all mathematical and operational details to perform any conversion (descriptive information are ignored in the conversion process).
+ *  @note see important detailed explanation in the [[HorizontalCRS]], [[VerticalCRS]] and [[AdditionalTransform]] documentation.
+ *  @note Earth Centered, Earth Fixed coordinate system (ECEF) is a full 3D cartesian system that unambiguously
+ *        expressed coordinates relative to the Earth Center. Since there is no horizontal portion independent from
+ *        the vertical portion this system cannot be represented by a GeographicCRS and remains a separate concept.
+ *  @public
+*/
+export declare class GeographicCRS implements GeographicCRSProps {
+    /** The horizontal portion of the geographic coordinate reference system. */
+    readonly horizontalCRS?: HorizontalCRS;
+    /** The vertical portion of the geographic coordinate reference system. */
+    readonly verticalCRS?: VerticalCRS;
+    /** The optional additional transform the geographic coordinate reference system. */
+    readonly additionalTransform?: AdditionalTransform;
+    constructor(data?: GeographicCRSProps);
+    /** Creates a Geographic CRS from JSON representation.
+     * @public */
+    static fromJSON(data: GeographicCRSProps): GeographicCRS;
+    /** Creates a JSON from the Geographic CRS definition
+     * @public */
+    toJSON(): GeographicCRSProps;
+    /** Compares two Geographic CRS. It is a strict compare operation not an equivalence test though
+     * number compares are applied a minuscule tolerance.
+     * It takes into account descriptive properties not only mathematical definition properties.
+     * @public
+     */
+    equals(other: GeographicCRS): boolean;
+}
 //# sourceMappingURL=CoordinateReferenceSystem.d.ts.map