@event4u/agent-config 9.7.0 → 9.9.0

package/docs/installation.md

@@ -1,959 +0,0 @@
-# Installation
-
-**Principle:** Global is the only consumer scope. `init` writes to
-user-scope paths (`~/.event4u/agent-config/`, `~/.claude/`,
-`~/.cursor/`, …); the project tree only gets `agents/overrides/`
-(the bridge marker was retired — ADR-020 amendment 2026-07-13; the
-global root resolves from `~/.event4u/agent-config`). Opt-in `export` if a team wants
-a tool's config committed to a repo. No Task, no Make, no build
-tools required.
-
-> **v2.5+** — `npx @event4u/agent-config init` always installs
-> globally. The `--project` / `--scope=project` flag is no longer
-> exposed to consumers; project-scope survives only behind the
-> maintainer-only `AGENT_CONFIG_DEV_MODE=1` flag (see
-> [`docs/maintainers/dev-mode.md`](maintainers/dev-mode.md)). The
-> legacy `--global` flag is accepted as a no-op for back-compat.
-> Rationale: [ADR-020](decisions/ADR-020-global-only-consumer-scope.md).
-
-The install records itself in `~/.event4u/agent-config/installed.lock`
-(schema_version, agent_config_version, installed_at, tools[]; the legacy
-`~/.config/agent-config/installed.lock` is read as a fallback). `npx
-@event4u/agent-config update` keeps that manifest in lockstep
-with the project pin in `.agent-settings.yml`. A version-mismatched
-re-run of `init` is refused with exit code 1 until you `update` or
-pass `--force`.
-
-To commit a specific tool's config into a project repo, use:
-
-```bash
-agent-config export --tool=<id> --output=<path>
-```
-
-(Idempotent; `--force` overrides drift. `--list` enumerates supported
-tool ids. See [`docs/contracts/command-clusters.md`](contracts/command-clusters.md)
-for the export contract.)
-
-## Per-IDE setup — quick index
-
-Pick your editor, follow the linked page, done. Each page lists its
-own one-liner, verification, and troubleshooting. The mechanisms
-section below this index is reference material for advanced installs
-(Composer, npm, manual, plugin marketplaces).
-
-| Surface | One-liner | Per-IDE page |
-|---|---|---|
-| **Claude Code** | `npx @event4u/agent-config init --tools=claude-code` | [`per-ide/claude-code.md`](setup/per-ide/claude-code.md) |
-| **Claude Desktop** | (uses `~/.claude/skills/` from Claude Code global install) | [`per-ide/claude-desktop.md`](setup/per-ide/claude-desktop.md) |
-| **Cursor** | `npx @event4u/agent-config init --tools=cursor` | [`per-ide/cursor.md`](setup/per-ide/cursor.md) |
-| **Windsurf** | `npx @event4u/agent-config init --tools=windsurf` | [`per-ide/windsurf.md`](setup/per-ide/windsurf.md) |
-| **Cline** | `npx @event4u/agent-config init --tools=cline` | [`per-ide/cline.md`](setup/per-ide/cline.md) |
-| **Aider** | `npx @event4u/agent-config init --tools=aider` | [`per-ide/aider.md`](setup/per-ide/aider.md) |
-| **Codex CLI** | `npx @event4u/agent-config init --tools=codex` | [`per-ide/codex.md`](setup/per-ide/codex.md) |
-| **Gemini CLI** | `npx @event4u/agent-config init --tools=gemini` | [`per-ide/gemini-cli.md`](setup/per-ide/gemini-cli.md) |
-| **GitHub Copilot** | `npx @event4u/agent-config init --tools=copilot` | [`per-ide/copilot.md`](setup/per-ide/copilot.md) |
-| **Augment Code** | `npx @event4u/agent-config init --tools=augment` | [`per-ide/augment.md`](setup/per-ide/augment.md) |
-| **Roo Code** | `npx @event4u/agent-config init --tools=roocode` | [`per-ide/roocode.md`](setup/per-ide/roocode.md) |
-| **Kilo Code** | `npx @event4u/agent-config init --tools=kilocode` | [`per-ide/kilocode.md`](setup/per-ide/kilocode.md) |
-| **Continue.dev** | `npx @event4u/agent-config init --tools=continue` | [`per-ide/continue.md`](setup/per-ide/continue.md) |
-| **Kiro** | `npx @event4u/agent-config init --tools=kiro` | [`per-ide/kiro.md`](setup/per-ide/kiro.md) |
-| **Zed** | `npx @event4u/agent-config init --tools=zed` | [`per-ide/zed.md`](setup/per-ide/zed.md) |
-| **JetBrains AI** | `npx @event4u/agent-config init --tools=jetbrains --global` | [`per-ide/jetbrains.md`](setup/per-ide/jetbrains.md) |
-| **Qoder** | `npx @event4u/agent-config init --tools=qoder --global` | [`per-ide/qoder.md`](setup/per-ide/qoder.md) |
-| **OpenCode** | `npx @event4u/agent-config init --tools=opencode --global` | [`per-ide/opencode.md`](setup/per-ide/opencode.md) |
-| **Trae** | `npx @event4u/agent-config init --tools=trae --global` | [`per-ide/trae.md`](setup/per-ide/trae.md) |
-| **Antigravity** | `npx @event4u/agent-config init --tools=antigravity --global` | [`per-ide/antigravity.md`](setup/per-ide/antigravity.md) |
-| **CodeBuddy** | `npx @event4u/agent-config init --tools=codebuddy --global` | [`per-ide/codebuddy.md`](setup/per-ide/codebuddy.md) |
-| **Droid (Factory)** | `npx @event4u/agent-config init --tools=droid --global` | [`per-ide/droid.md`](setup/per-ide/droid.md) |
-| **Warp** | `npx @event4u/agent-config init --tools=warp --global` | [`per-ide/warp.md`](setup/per-ide/warp.md) |
-| **All surfaces** | `npx @event4u/agent-config init` (default) | (each page above applies) |
-
-Combine surfaces by comma-separating: `--tools=claude-code,cursor,windsurf`.
-
-> Looking for **global** (cross-project) install? Each per-IDE page
-> documents its own `npx @event4u/agent-config global --tools=<ide>`
-> command.
-
----
-
-## Upgrading from v1
-
-v2 is a breaking change: the local-install scheme (Composer
-`require-dev`, npm `devDependency`, the `--global` symlink namespace
-under `~/.claude/`, `~/.cursor/`, `~/.codeium/windsurf/`,
-`~/.config/agent-config/`) is **retired**. v2 is npx-only — the
-runtime is resolved per invocation, pinned by
-`agent_config_version` in `.agent-settings.yml`.
-
-One command does the cutover, idempotently:
-
-```bash
-./agent-config migrate              # remove legacy install signals
-./agent-config migrate --dry-run    # detect only, no writes
-```
-
-What `migrate` cleans up:
-
-| What | Action |
-|---|---|
-| `package.json` → `devDependencies.@event4u/agent-config` | Removed (lockfile updated on next `npm install`). |
-| `composer.json` → `require*.event4u/agent-config` | Removed (lockfile updated on next `composer update`). |
-| Symlinks `.augment/`, `.claude/`, `.cursor/`, `.clinerules/`, `.windsurfrules` pointing into `vendor/` or `node_modules/` | Deleted. User-owned links are preserved with a warning. |
-| `.agent-settings.yml` | Written fresh if missing, with `agent_config_version` pinned. |
-| `.gitignore` agent-config block | Refreshed. |
-
-After `migrate` runs, you can drop the now-unreferenced
-`node_modules/@event4u/agent-config/` and `vendor/event4u/agent-config/`
-directories with `npm prune` and `composer update` respectively.
-
-Full contract sketch + the retired `--global` namespace teardown:
-[`docs/migration/v1-to-v2.md`](migration/v1-to-v2.md).
-
----
-
-## Mechanisms reference
-
-The rest of this page documents the underlying install mechanisms
-(Composer, npm, manual clone, plugin marketplaces). Most users want
-the per-IDE index above.
-
-
-> **Primary installer:** `scripts/install` — a small bash orchestrator that
-> runs the two real installer stages in order:
->
-> 1. `scripts/install.sh` — payload sync (copy rules, symlink skills and
->    commands, create tool-specific directories).
-> 2. `scripts/install.py` — bridge files (`.agent-settings.yml`, VSCode /
->    Augment / Copilot JSON descriptors).
->
-> `npx @event4u/agent-config init` and `setup.sh` (curl-based)
-> are thin wrappers that delegate to `scripts/install`. Both underlying
-> stages remain callable directly for advanced use; see their `--help`.
->
-> Python 3.10+ is required for bridges. If it is missing, the orchestrator
-> prints a warning and continues with the payload sync only.
->
-> **Node.js 20.11+** is required for the `agent-config` binary itself.
-> Starting with the TypeScript CLI shell (ADR-012, road
-> `typescript-cli-and-local-gui-foundation`), the published `bin/`
-> entry is the compiled `dist/cli/agent-config.js`; `npx` resolves it
-> through the registry, so consumers do not need to install Node
-> dependencies into their own project. The package's `engines.node`
-> pin is the source of truth.
-
-| Mode | Best for | Scope |
-|---|---|---|
-| **Project-installed** (recommended) | Teams, shared standards | Repository-wide |
-| **Plugin-installed** | Individual users, global use | User-wide |
-
-> **All paths on this page are still supported.** The labels
-> (`advanced` / `experimental` / `staged`) describe how prominent the
-> path is in our recommendation order, not its support status.
-> Composer + npm are the default; everything else stays shipped and
-> tested. Nothing on this page is being removed in 1.15.0 — the
-> reorder simply marks which paths get the most maintenance attention
-> and which we keep as fallbacks. See R9 in
-> [`agents/roadmaps/archive/road-to-post-pr29-optimize.md`](../agents/roadmaps/archive/road-to-post-pr29-optimize.md)
-> for the rationale.
-
-| Label | Meaning | Examples |
-|---|---|---|
-| (no label) | Primary path — first-class, fully supported | Composer, npm, Augment / Claude Code / Copilot CLI plugins |
-| `advanced` | Supported fallback — works, expects familiarity with the toolchain | Git submodule, manual clone, VS Code Git URL |
-| `experimental` | Shipped but evolving — interface may shift between minor releases | Claude.ai Web Skills UI |
-| `staged` | Shipped, narrow surface area — kept for users who already use the platform | Linear AI workspace guidance |
-
----
-
-## Quickstart — one-liner entrypoints
-
-Try `@event4u/agent-config` in any directory in under 30 seconds, without
-adding it as a dev dependency or cloning the repo first. Both
-entrypoints are thin wrappers around `scripts/install` — same payload,
-same flags, no extra state.
-
-### `npx` (Node ≥ 18)
-
-```bash
-# Pick tools interactively (TTY checkbox prompt)
-npx @event4u/agent-config init
-
-# Pick tools explicitly, non-interactive
-npx @event4u/agent-config init --tools=claude-code,cursor --yes
-
-# Install everything (the default — backward-compatible)
-npx @event4u/agent-config init --tools=all --yes
-
-# Test a specific git ref (branch, tag, sha) instead of the latest npm tag
-npx @event4u/agent-config init --ref=main --yes
-```
-
-`npx @event4u/agent-config init` fetches the latest tarball, runs
-`bash scripts/install --target <cwd> …`, and the install script handles
-its own cleanup. The same package exposes every other `agent-config`
-subcommand (`sync`, `validate`, `mcp:render`, `roadmap:progress`, …) —
-see `npx @event4u/agent-config help`.
-
-### `curl | bash` (no Node required)
-
-```bash
-# Defaults (interactive picker if your terminal is a TTY, else --tools=all)
-curl -sSL https://raw.githubusercontent.com/event4u-app/agent-config/main/setup.sh | bash
-
-# Explicit tools, non-interactive (same flags as scripts/install)
-curl -sSL https://raw.githubusercontent.com/event4u-app/agent-config/main/setup.sh \
-  | bash -s -- --tools=claude-code,cursor --yes
-
-# Install from a specific git ref
-curl -sSL https://raw.githubusercontent.com/event4u-app/agent-config/main/setup.sh \
-  | bash -s -- --ref=v1.39.0 --tools=cursor --yes
-```
-
-Requires `bash`, `tar`, `curl` (or `wget`), and Python ≥ 3.10 on the
-host. Mirrors a common install-script pattern.
-
-### Interactive `--tools` picker
-
-When `scripts/install` runs without an explicit `--tools` flag in an
-interactive terminal (stdin + stdout both TTYs, `--yes` not passed), it
-prompts for a comma-separated tool selection. In CI / piped invocations
-the picker is skipped and the backward-compatible `all` default is
-used. Pass `--yes` (or `-y`) to force non-interactive mode anywhere.
-
----
-
-## Project-installed mode (recommended for teams)
-
-Install once in the project — available to everyone working on it.
-The package is versioned with the project. Settings are committed once.
-
-### npx (recommended for any project)
-
-```bash
-npx @event4u/agent-config init --tools=claude-code,cursor
-```
-
-`npx` fetches the latest `@event4u/agent-config` tarball and runs
-`scripts/install` with the selected tools. Nothing is added to
-`package.json`.
-
-### Global CLI (one install per machine)
-
-```bash
-npm install -g @event4u/agent-config
-agent-config --help
-```
-
-The global install puts `agent-config` on `$PATH` so the project
-wrapper (`./agent-config`) can fall through to it when no
-`node_modules/@event4u/agent-config/` exists.
-
-### Global CLI + per-project settings (minimal flow)
-
-For teams that want to keep the runtime global (one install per
-machine) but still version a per-project `.agent-settings.yml` and a
-project-local `agents/` folder, use the `--minimal` init:
-
-```bash
-# 1. Install the runtime once per machine
-npm install -g @event4u/agent-config
-
-# 2. Inside the project, write only the per-project shell
-agent-config init --minimal
-# or, without a global install:
-npx @event4u/agent-config init --minimal
-```
-
-`--minimal` writes exactly three files into the project root:
-
-- `.agent-settings.yml` — per-project cost profile, member config,
-  feature flags. Committed.
-- `agents/.gitkeep` — placeholder so the directory is committed
-  before the first roadmap, decision, or council session lands.
-- `./agent-config` — bash wrapper that pins
-  `AGENT_CONFIG_PROJECT_ROOT` to the project root and forwards every
-  subcommand to the globally installed CLI. Committed.
-
-Nothing else — no `.augment/`, no `.claude/`, no `.cursor/`, no
-`AGENTS.md`. The shipped tool payload stays in the user's home (or
-the npx cache) and is shared across every project on the machine.
-
-#### Decision table — `--minimal` vs full `init`
-
-| Pick `--minimal` when | Pick full `init` when |
-|---|---|
-| Runtime is already installed globally (`npm i -g`). | First-time setup on a fresh machine. |
-| Team wants one source of truth for skills / rules / commands across every repo (shared via the global install). | Team wants per-repo skills / rules / commands committed alongside the code. |
-| `agents/` content (roadmaps, decisions) is the only per-project state worth committing. | `AGENTS.md`, `GEMINI.md`, or `.github/copilot-instructions.md` need project-specific overrides. |
-| The repo runs in CI and you do not want to vendor the full payload. | The repo cannot rely on a global install (air-gapped, sandboxed CI without npm). |
-| Migrating an existing project from the legacy `.git`-anchored install. | Starting a new project that has never seen `agent-config`. |
-
-Nested-install guard: `init --minimal` refuses to run when an
-ancestor already contains an anchor (`.git`, an `agents/` directory
-with a marker, or another `.agent-settings.yml`). This prevents
-shadow installs inside an existing project. Override with explicit
-`--target <dir>` if the nesting is intentional.
-
-`--minimal` does **not** pin `agent_config_version` — the project
-follows whichever version the global CLI was installed at. Pin
-explicitly by adding `agent_config_version: <semver>` to
-`.agent-settings.yml` when you want a reproducible runtime.
-
-### Installer orchestrator (`scripts/install`)
-
-The orchestrator chains payload sync and bridge generation:
-
-```bash
-bash scripts/install                  # defaults to rule_loading_tier=balanced
-bash scripts/install --profile=minimal
-bash scripts/install --force          # overwrite existing bridges
-bash scripts/install --skip-bridges   # payload only
-bash scripts/install --skip-sync      # bridges only
-bash scripts/install --dry-run        # show payload sync plan, skip bridges
-```
-
-Under the hood:
-
-- `scripts/install.sh` — payload sync (callable directly for sync-only runs).
-- `scripts/install.py` — bridge files (callable directly for bridge-only runs).
-  Two install.py-specific flags worth knowing:
-  - `--dry-run` prints a plan summary (profile · scope · tools · target ·
-    wizard auto-launch decision) and exits 0 without writing files or
-    spawning subprocesses. Distinct from the bash wrapper's `--dry-run`,
-    which only skips bridges.
-  - `--no-ui` suppresses the post-install browser-wizard auto-launch.
-    Also honored via `AGENT_CONFIG_NO_UI=1`. CI runners (`CI=1`) and
-    non-TTY stdouts auto-suppress regardless. See
-    [`docs/wizard.md § Auto-launch`](wizard.md#auto-launch-from-npx--init).
-
-A full run creates:
-
-- `.agent-settings.yml` — profile configuration (YAML)
-- `.vscode/settings.json` — VS Code / Copilot plugin discovery
-- `.augment/settings.json` — Augment plugin activation
-- `.github/plugin/marketplace.json` — Copilot CLI marketplace
-- `.augment/`, `.claude/`, `.cursor/`, `.clinerules/`, `.windsurfrules`, `GEMINI.md`
-- `AGENTS.md`, `.github/copilot-instructions.md` (only if missing)
-
-No Task, no Make, no build tools required. **Python 3** (standard library only)
-is required for bridges — it is pre-installed on macOS 12.3+ and virtually
-every Linux distribution. If Python 3 is missing, the orchestrator warns,
-runs the payload sync anyway, and asks you to re-run `scripts/install`
-after installing Python.
-
-### What happens after install
-
-`scripts/install` creates project-local content for all supported tools:
-- `.augment/rules/`, `.augment/skills/`, `.augment/commands/` — for Augment
-- `.cursor/rules/` — for Cursor
-- `.clinerules/` — for Cline
-- `.windsurfrules` — for Windsurf
-- `.claude/rules/`, `.claude/skills/` — for Claude Code
-- `AGENTS.md`, `GEMINI.md` — for Copilot and Gemini CLI
-- `.github/copilot-instructions.md` — for GitHub Copilot
-
-This means: **every developer who opens the project gets the same agent behavior,
-regardless of which AI tool they use.** No per-developer plugin installation needed.
-
-### What the team commits
-
-After initial setup, commit these files:
-
-```
-.agent-settings.yml                ← shared profile (e.g., rule_loading_tier: balanced)
-agents/installed-tools.lock        ← AI bill of materials (ADR-008, Phase 3)
-.augment/                          ← rules, skills, commands (symlinks)
-.cursor/rules/                     ← Cursor rules (symlinks)
-.claude/                           ← Claude rules, skills (symlinks)
-AGENTS.md                          ← Copilot/Gemini instructions
-.github/copilot-instructions.md   ← GitHub Copilot instructions
-```
-
-`agents/installed-tools.lock` lists every AI tool the project expects,
-its scope (`global` or `project`), and its bridge marker path. Written
-by `init`, replayed by `sync`, checked by `validate`. Schema and
-workflow: [`docs/guidelines/agent-infra/installed-tools-manifest.md`](guidelines/agent-infra/installed-tools-manifest.md).
-
-### Team onboarding — clone → sync → done
-
-New team members get every AI bridge online with a single command:
-
-```bash
-git clone <repo>
-cd <repo>
-npx @event4u/agent-config sync
-```
-
-`sync` reads `agents/installed-tools.lock` and re-runs the installer
-for every tool whose bridge marker is missing locally. Idempotent —
-re-running after every clone is safe. Tools with markers already in
-place are skipped.
-
-Pair it with a CI gate to catch drift in PRs:
-
-```bash
-npx @event4u/agent-config validate
-```
-
-`validate` is read-only. Exit 1 on any of: marker missing, scope
-divergence (manifest says `project` but marker only exists at the
-global anchor, or vice versa), version drift (manifest's
-`agent_config_version` ≠ installed package). Full drift catalog and
-fix table: [`installed-tools-manifest.md § Drift detection`](guidelines/agent-infra/installed-tools-manifest.md#drift-detection-ci-gate).
-
----
-
-## Plugin-installed mode (optional, for individual use)
-
-Install directly in your agent for global, cross-project use.
-This is additional to project-installed mode, not a replacement.
-
-### Augment CLI
-
-```bash
-auggie plugin install agent-config@event4u-agent-config
-```
-
-### Claude Code — plugin deprecated (single-surface model)
-
-**Do not install the marketplace plugin for Claude Code.** The npx/npm
-global install (`npx -y @event4u/agent-config init`) is the single supported
-surface: it deploys skills/commands/rules to `~/.claude/` **and** registers
-the deterministic hooks in a managed `~/.claude/settings.json` block. The
-plugin would only duplicate every skill/command listing while its git-SHA
-snapshot silently lags each release.
-
-Already have the plugin from an earlier install?
-
-```bash
-claude plugin uninstall agent-config@event4u-agent-config
-```
-
-Hooks keep firing after removal (they live in `settings.json`, not the
-plugin); `agent-config doctor` verifies via the `hook-wiring` check and
-flags a leftover plugin as `claude-plugin: duplicate surface`.
-
-### Copilot CLI
-
-```bash
-copilot plugin install agent-config@event4u-agent-config
-```
-
-### When to use plugin mode
-
-- You want agent-config behavior in ALL projects (not just one)
-- You want auto-updates via marketplace
-- You want plugin-specific features (hooks, MCP servers)
-
-### Team auto-setup for plugins
-
-To auto-recommend the plugin for your team, add the marketplace to project settings.
-See [`src/templates/consumer-settings/`](../templates/consumer-settings/) for ready-to-use config templates per tool.
-
-For marketplace registration (required once before `plugin install`):
-
-```bash
-# Augment CLI
-auggie marketplace add event4u-app/agent-config
-
-# Claude Code
-claude marketplace add event4u-app/agent-config
-
-# Copilot CLI
-copilot marketplace add event4u-app/agent-config
-```
-
----
-
-## Cloud / Hosted agent installation
-
-For agents running outside your local machine — Claude.ai Web Skills
-and Linear AI — the package's local installer cannot run. Instead,
-the package ships pre-built artefacts you upload or paste into the
-hosted platform's own configuration surface.
-
-These channels are **additional** to project- and plugin-installed
-modes; use them when the agent loop runs on the platform's servers,
-not on your machine.
-
-> Both cloud channels remain shipped and tested. The labels reflect
-> recommendation prominence, not support status — see the label table
-> at the top of this page.
-
-### Claude.ai Web (Skills UI) — `experimental`
-
-> `experimental` — shipped, still tested, but the upload surface and
-> bundle format may shift between minor releases as Claude.ai's Skills
-> UI evolves. Pin to a release tag if you depend on a specific bundle
-> shape.
-
-Claude.ai Web supports Skills via manual ZIP upload through the Skills
-UI. The package builds one ZIP per cloud-eligible skill.
-
-1. **Build the bundles**
-
-   ```bash
-   task build-cloud-bundles-all
-   ```
-
-   Output: `dist/cloud/<skill>.zip` per eligible skill. Skills marked
-   `cloud_safe: noop` (filesystem-bound, e.g. `chat-history`,
-   `file-editor`) are bundled with a stripped no-op variant; T3-H
-   skills (hard filesystem dependencies) are excluded by default.
-   See [`scripts/audit_cloud_compatibility.py`](../src/scripts/audit_cloud_compatibility.py)
-   for per-skill tier and [`scripts/build_cloud_bundle.py`](../src/scripts/build_cloud_bundle.py)
-   for the gating logic.
-
-2. **Upload to Claude.ai**
-
-   - Open Claude.ai → Skills → Upload Skill
-   - Select one bundle from `dist/cloud/`
-   - Repeat per skill you want available
-
-3. **Verify** — open a fresh Claude.ai conversation and confirm the
-   skill appears in the Skills picker.
-
-### Linear AI (Codegen, Charlie, …) — `staged`
-
-> `staged` — shipped, narrow surface area, kept primarily for users
-> already operating inside Linear. Iteration cadence is slower than
-> the project- and plugin-installed paths; major changes land first
-> on Composer + npm and propagate to the Linear digest in a follow-up.
-
-Linear AI agents read free-form guidance from Linear's workspace
-settings; there is no plugin or upload mechanism. The package ships
-a pre-built digest split into three layers, paste each layer into
-the matching Linear field.
-
-1. **Build the digest**
-
-   ```bash
-   task build-linear-digest
-   ```
-
-   Output:
-   - `dist/linear/workspace.md` — universal coding posture (T1 rules)
-   - `dist/linear/team.md` — framework-specific guidance (Laravel, …)
-   - `dist/linear/personal.md` — stub for individual overrides
-
-2. **Paste into Linear**
-
-   - Open Linear → Settings → Agents → Additional guidance
-   - Paste `workspace.md` into the workspace-level field
-   - Paste `team.md` into your team's field (if framework-specific)
-   - Leave `personal.md` empty unless you have personal overrides
-
-3. **Per-layer rationale** — see
-   [`docs/contracts/linear-ai-three-layers.md`](contracts/linear-ai-three-layers.md)
-   for the split rationale and
-   [`docs/contracts/linear-ai-rules-inclusion.md`](contracts/linear-ai-rules-inclusion.md)
-   for which rules go where.
-
----
-
-## Alternative install methods — `advanced`
-
-> `advanced` — supported fallbacks for users comfortable driving the
-> orchestrator directly. They share the same `scripts/install` entry
-> point as Composer and npm; the only difference is how the package
-> source ends up on disk. Pick these when you cannot use Composer or
-> npm (e.g. a polyglot repo without either, or a CI runner that
-> already vendors the package via submodule).
-
-### Git Submodule
-
-```bash
-git submodule add git@github.com:event4u-app/agent-config.git .agent-config
-bash .agent-config/scripts/install --target .
-```
-
-### Manual
-
-```bash
-bash path/to/agent-config/scripts/install --target /path/to/your/project
-```
-
-### Install from Git URL (VS Code / Copilot)
-
-VS Code can install plugins directly from a Git repository URL.
-Point it to `https://github.com/event4u-app/agent-config`.
-
-> **Note:** `.augment/` content depends on the package manager having been executed.
-> After a fresh clone, run `composer install` or `npm install` first.
-
----
-
-## After installation: choose a profile
-
-The system works immediately with sensible defaults. Optionally, create `.agent-settings.yml`
-to choose a profile:
-
-```yaml
-rule_loading_tier: balanced
-```
-
-| Profile | What's active | For whom |
-|---|---|---|
-| `minimal` | Kernel only — Iron-Law floor, zero router | Token-constrained agents |
-| `balanced` | + Runtime dispatcher + shell handler | Most teams |
-| `full` | + Tool adapters (GitHub, Jira) | Platform teams |
-
-No profile configured = `balanced` behavior (default). Rationale:
-[`docs/contracts/cost-profile-defaults.md`](contracts/cost-profile-defaults.md).
-→ [Full profile details](customization.md)
-
----
-
-## First test
-
-After installation, try these 3 prompts with your agent:
-
-1. `"Refactor this function"` → agent should analyze first, not jump into code
-2. `"Add caching to this"` → agent should ask clarifying questions
-3. `"Implement this feature"` → agent should respect your existing codebase
-
-If the agent behaves differently than before — it's working.
-
-**Optional:** Run `task first-run` for a guided walkthrough (requires [Task](https://taskfile.dev/)).
-
-→ [Full getting started guide](getting-started.md)
-
----
-
-## How the installer works
-
-### Two-stage pipeline
-
-`scripts/install` runs these stages in order:
-
-| Stage | Script | Output |
-|---|---|---|
-| 1. Payload sync | `scripts/install.sh` | `.augment/`, `.claude/`, `.cursor/`, `.clinerules/`, `.windsurfrules`, `GEMINI.md` |
-| 2. Bridges     | `scripts/install.py` | `.agent-settings.yml`, `.vscode/settings.json`, `.augment/settings.json`, `.github/plugin/marketplace.json` |
-
-Either stage can be skipped (`--skip-sync`, `--skip-bridges`) or invoked
-directly. Stage 2 is gracefully skipped when Python 3 is unavailable.
-
-### Hybrid sync strategy (stage 1)
-
-| Directory | Method | Reason |
-|---|---|---|
-| `.augment/rules/` | **Copy** | Augment Code cannot load symlinked rules |
-| Everything else | **Symlink** | Auto-updates on package update, saves disk |
-
-### What gets created
-
-```
-your-project/
-├── .augment/
-│   ├── rules/          ← copies (Augment Code requirement)
-│   ├── skills/         ← symlinks → package
-│   ├── commands/       ← symlinks → package
-│   ├── guidelines/     ← symlinks → package
-│   ├── templates/      ← symlinks → package
-│   └── contexts/       ← symlinks → package
-├── .claude/
-│   ├── rules/          ← symlinks → .augment/rules/
-│   └── skills/         ← symlinks → .augment/skills/
-├── .cursor/rules/      ← symlinks → .augment/rules/
-├── .clinerules/        ← symlinks → .augment/rules/
-├── .windsurfrules      ← generated (concatenated rules)
-├── GEMINI.md           ← symlink → AGENTS.md
-└── AGENTS.md           ← project-specific (copied if missing)
-```
-
-### CLI options
-
-```
-bash scripts/install [OPTIONS]
-
-Options:
-  --source <dir>    Package source directory (default: auto-detect)
-  --target <dir>    Target project root (default: $PROJECT_ROOT or cwd)
-  --profile <name>  Cost profile for bridges (minimal|balanced|full)
-  --force           Overwrite existing bridge files
-  --dry-run         Show payload sync plan; skip bridges
-  --verbose         Detailed payload sync output
-  --quiet           Suppress non-error output
-  --skip-sync       Skip payload sync (install.sh)
-  --skip-bridges    Skip bridge files (install.py)
-  --help, -h        Show this help
-```
-
-The underlying stages keep their own CLI surfaces:
-`bash scripts/install.sh --help` and `npx @event4u/agent-config install --help`.
-
----
-
-## Global user-level install — retired
-
-The previous `--global` symlink scheme (kernel rules + curated skills
-copied into `~/.claude/`, `~/.cursor/`, `~/.codeium/windsurf/`, and
-`~/.config/agent-config/` under an `event4u/` namespace) has been
-**retired** under the npx-only distribution model. Run
-`npx @event4u/agent-config init` per project instead; the
-`agent_config_version` pin in `.agent-settings.yml` keeps every
-invocation reproducible. See [`migration/v1-to-v2.md`](migration/v1-to-v2.md)
-for the upgrade path.
-
----
-
-## Updating
-
-When a new version of the package is published:
-
-```bash
-# npx (one-shot, recommended) — always uses the latest tarball
-npx @event4u/agent-config init --tools=claude-code,cursor
-
-# Global CLI
-npm install -g @event4u/agent-config@latest
-agent-config --help
-```
-
-The installer is idempotent — re-running it after an update refreshes
-the symlinks and regenerates derived files (`.windsurfrules`,
-`.github/copilot-instructions.md`). It does **not** overwrite
-`AGENTS.md` or anything in `agents/overrides/`.
-
----
-
-## AI Council local state
-
-The AI Council ([`docs/contracts/ai-council-config.md`](contracts/ai-council-config.md))
-writes two local-only files outside the repo contract:
-
-- `~/.event4u/agent-config/cli-calls.json` — per-day call counter for
-  `mode: cli` members. Daily UTC reset. Inspect with
-  `agent-config council quota`; clear today's counter for one provider
-  with `agent-config council quota --reset <provider> --confirm`.
-- `agents/runtime/council/events.log` — JSONL audit trail. One line per
-  necessity-gate decision and per quota block. Gitignored by the
-  installer (managed `.gitignore` block); never committed.
-  `original_ask` is hashed `sha256[:12]` before write — the raw prompt
-  is never persisted.
-
-Both are opt-in by construction: the quota counter only fires when a
-provider has `cli_call_budget.max_calls_per_day.<provider>` set, and
-the events log is purely additive (deletable at any time).
-
-### Kill-switches
-
-Per-feature environment overrides for ephemeral worktrees, CI runners,
-or sandbox testing:
-
-- `AGENT_CONFIG_NO_EVENTS_LOG=1` — disables every write to
-  `agents/runtime/council/events.log` in-process. Quota counter and council
-  output stay untouched.
-- `AGENT_CONFIG_LEGACY_ANCHOR=1` — reverts project-root discovery to
-  the pre-step-7 `.git`-only walk. See [Migration — Step 7 anchor
-  discovery](#migration--step-7-anchor-discovery) below for the
-  precedence rules and when to use this.
-- `AGENT_CONFIG_PROJECT_ROOT=<abs-path>` — pins the resolved project
-  root, skipping the anchor walk entirely. Set automatically by the
-  `./agent-config` wrapper; set manually in CI when the working
-  directory is not a descendant of the project root.
-
----
-
-## Migration — Step 7 anchor discovery
-
-Before Step 7, the CLI located the project root by walking up for a
-`.git` directory only. Step 7 widens the anchor set so non-git
-projects (sparse checkouts, monorepo sub-trees, `agent-config`-only
-worktrees) resolve correctly and so subdirectory invocations stop
-falling back to `cwd`.
-
-### Anchor precedence (D3 — cascade-conflict decision)
-
-Walk up from CWD. The first ancestor containing a **boundary
-anchor** wins:
-
-1. `.git` (file or directory).
-2. `agents/` directory containing **any** of `roadmaps/`,
-   `settings/.ai-council.yml`, or `roadmaps-progress.md` — bare `agents/`
-   does **not** anchor (D1).
-
-If no boundary anchor exists in any ancestor, the **outermost**
-(closest-to-fs-root) `.agent-settings.yml` becomes the root. This
-preserves the layered-settings cascade — see
-[`agents/runtime/council/sessions/step-7-d3-cascade-conflict-decision.md`](../agents/runtime/council/sessions/step-7-d3-cascade-conflict-decision.md)
-for the rationale.
-
-When a single ancestor carries multiple anchors, the **diagnostic
-anchor name** reported by `agent-config doctor` follows the D3
-tie-break order (`.agent-settings.yml` > `agents/` > `.git`). The
-resolved path is identical either way.
-
-### Resolution precedence (which root wins)
-
-In order, first match wins (Step 8 adds the `--root` flag at the top):
-
-1. Global `--root <dir>` flag (Step 8) — escape hatch for monorepos.
-2. Explicit `--project <dir>` / `--target <dir>` on the CLI.
-3. `AGENT_CONFIG_PROJECT_ROOT=<abs-path>` env var.
-4. Anchor walk from CWD (rules above).
-5. Fallback to CWD.
-
-The `./agent-config` wrapper sets step 3 to its own directory, so
-subcommands invoked from a subdirectory still target the right root
-even after `os.chdir`.
-
-### Project-root override — `--root` (Step 8)
-
-The global `--root <dir>` flag pins discovery to a specific directory.
-It is parsed by the bash dispatcher **before** any subcommand and beats
-every other channel, including the wrapper-pinned env var:
-
-```bash
-# Run doctor against a sibling project from anywhere
-agent-config --root /work/projects/site-a doctor --context
-
-# Equivalent — long-form `=` syntax
-agent-config --root=/work/projects/site-a doctor --context
-```
-
-**Fail-loud validation.** Invalid paths exit with code `2` instead of
-silently falling back to CWD:
-
-```text
-❌  agent-config: --root points to a path that does not exist: /nope
-```
-
-The same validation applies to `--project` and
-`AGENT_CONFIG_PROJECT_ROOT` — every explicit override is checked.
-
-**Wrapper coupling.** When the project-local `./agent-config` wrapper
-runs, it pins `AGENT_CONFIG_PROJECT_ROOT` to its own directory. The
-`--root` flag explicitly overrides that pin (the wrapper logs a stderr
-hint when this happens), so monorepo sub-trees can target one another
-without unpinning the wrapper.
-
-### Monorepo semantics
-
-Monorepos with multiple `agent-config` consumers (e.g. one package per
-sub-tree) work out of the box because the anchor walk stops at the
-**nearest** boundary anchor (`agents/<markers>` or `.git`). From inside
-`packages/site-a/`, discovery resolves to `packages/site-a/`, not the
-monorepo root.
-
-When you need to invoke a sibling package's CLI from anywhere, use
-`--root`:
-
-```bash
-# From the monorepo root, target site-b
-agent-config --root packages/site-b validate
-
-# From inside site-a, run a sync against site-b
-agent-config --root ../site-b sync
-```
-
-`--root` is the recommended channel — explicit, fail-loud, and visible
-in `doctor --context` output. Setting `AGENT_CONFIG_PROJECT_ROOT`
-manually still works but is less discoverable.
-
-### Diagnostics — `doctor --trace-root` and `--context`
-
-Two read-only diagnostic flags surface how discovery resolved the
-project root:
-
-```bash
-# Show every ancestor probed + winning anchor
-agent-config doctor --trace-root
-
-# Show effective root, origin, install mode, settings layers, wrapper
-agent-config doctor --context
-```
-
-Sample `--trace-root` output:
-
-```text
-  📍  start: /work/projects/site-a/src
-  📍  origin: agents-dir
-  trace:
-    · [boundary] /work/projects/site-a/src  (no .git, no agents/)
-    ✅ [boundary] /work/projects/site-a → agents-dir  (agents/ has roadmaps/)
-  📍  resolved root: /work/projects/site-a (anchor: agents-dir)
-```
-
-Sample `--context` output:
-
-```text
-  📍  project_root: /work/projects/site-a  (origin: agents-dir)
-  📦  install_mode: full  (source: marker-file)
-  …
-```
-
-Both flags accept `--json` for machine-readable output. The
-`install_mode_source` is `marker-file` when
-`agents/.agent-state/install-mode.txt` exists (written by the
-installer since Step 8) and `heuristic` for back-compat installs.
-
-### When to set `AGENT_CONFIG_LEGACY_ANCHOR=1`
-
-Set this only as a temporary escape hatch — for example, when the
-new anchor set surfaces an unexpected ancestor in a CI pipeline that
-already passes the legacy walk. Behaviour:
-
-- Walk up for `.git` only (Step-6 behaviour).
-- `agents/` and `.agent-settings.yml` are ignored as anchors.
-- Cascade order is unchanged — layered `.agent-settings.yml` files
-  still merge.
-
-The kill-switch is scheduled for removal after one minor-version
-soak (D5). File an issue if you need it longer-term so the precedence
-table can absorb the missing case.
-
-### Verifying the resolved root
-
-```bash
-agent-config doctor --context
-```
-
-prints the resolved project root, origin (`root-flag` / `explicit` /
-`env` / anchor name / `cwd-fallback`), install mode, settings-layer
-chain, and wrapper state. Use this when a command appears to read the
-wrong `.agent-settings.yml`. Pair with `--trace-root` (above) when the
-**anchor walk itself** needs debugging.
-
----
-
-## Windows
-
-Native Windows is not a first-class target. Use one of the following:
-
-- **WSL2** (recommended): clone and install inside a WSL distribution.
-- **Git Bash**: works for installation but symlinks require Windows
-  Developer Mode or admin privileges. Re-run the installer after each
-  update to refresh file copies if symlinks aren't available.
-- **PowerShell / cmd**: not supported.
-
-If you need full native Windows support, please open an issue — we
-cannot validate changes without access to a Windows setup.
-
----
-
-## Uninstalling
-
-There is no dedicated uninstall command yet. To remove the package:
-
-```bash
-# 1. Remove the dependency
-composer remove event4u/agent-config
-# or
-npm uninstall @event4u/agent-config
-
-# 2. Remove generated project-local content
-rm -rf .augment .claude .cursor .clinerules .windsurfrules GEMINI.md
-rm -f .agent-settings .agent-settings.yml .agent-settings.backup.key-value
-rm -f .github/copilot-instructions.md
-```
-
-Remove the `# event4u/agent-config` block from `.gitignore` manually.
-Keep `AGENTS.md` if you customized it — it is yours, not the package's.
-
-See also: [docs/troubleshooting.md](troubleshooting.md).
-
----
-
-← [Back to README](../README.md)