@cpp.js/package-zlib 1.0.0-beta.20 → 1.0.0-beta.22

package/.cppjs/build/source/infback.c

@@ -1,628 +0,0 @@
-/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2022 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
-   This code is largely copied from inflate.c.  Normally either infback.o or
-   inflate.o would be linked into an application--not both.  The interface
-   with inffast.c is retained so that optimized assembler-coded versions of
-   inflate_fast() can be used with either inflate.c or infback.c.
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "inflate.h"
-#include "inffast.h"
-
-/*
-   strm provides memory allocation functions in zalloc and zfree, or
-   Z_NULL to use the library memory allocation functions.
-
-   windowBits is in the range 8..15, and window is a user-supplied
-   window and output buffer that is 2**windowBits bytes.
- */
-int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits,
-                             unsigned char FAR *window, const char *version,
-                             int stream_size) {
-    struct inflate_state FAR *state;
-
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-        stream_size != (int)(sizeof(z_stream)))
-        return Z_VERSION_ERROR;
-    if (strm == Z_NULL || window == Z_NULL ||
-        windowBits < 8 || windowBits > 15)
-        return Z_STREAM_ERROR;
-    strm->msg = Z_NULL;                 /* in case we return an error */
-    if (strm->zalloc == (alloc_func)0) {
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-        strm->zalloc = zcalloc;
-        strm->opaque = (voidpf)0;
-#endif
-    }
-    if (strm->zfree == (free_func)0)
-#ifdef Z_SOLO
-        return Z_STREAM_ERROR;
-#else
-    strm->zfree = zcfree;
-#endif
-    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
-                                               sizeof(struct inflate_state));
-    if (state == Z_NULL) return Z_MEM_ERROR;
-    Tracev((stderr, "inflate: allocated\n"));
-    strm->state = (struct internal_state FAR *)state;
-    state->dmax = 32768U;
-    state->wbits = (uInt)windowBits;
-    state->wsize = 1U << windowBits;
-    state->window = window;
-    state->wnext = 0;
-    state->whave = 0;
-    state->sane = 1;
-    return Z_OK;
-}
-
-/*
-   Return state with length and distance decoding tables and index sizes set to
-   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
-   If BUILDFIXED is defined, then instead this routine builds the tables the
-   first time it's called, and returns those tables the first time and
-   thereafter.  This reduces the size of the code by about 2K bytes, in
-   exchange for a little execution time.  However, BUILDFIXED should not be
-   used for threaded applications, since the rewriting of the tables and virgin
-   may not be thread-safe.
- */
-local void fixedtables(struct inflate_state FAR *state) {
-#ifdef BUILDFIXED
-    static int virgin = 1;
-    static code *lenfix, *distfix;
-    static code fixed[544];
-
-    /* build fixed huffman tables if first call (may not be thread safe) */
-    if (virgin) {
-        unsigned sym, bits;
-        static code *next;
-
-        /* literal/length table */
-        sym = 0;
-        while (sym < 144) state->lens[sym++] = 8;
-        while (sym < 256) state->lens[sym++] = 9;
-        while (sym < 280) state->lens[sym++] = 7;
-        while (sym < 288) state->lens[sym++] = 8;
-        next = fixed;
-        lenfix = next;
-        bits = 9;
-        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
-
-        /* distance table */
-        sym = 0;
-        while (sym < 32) state->lens[sym++] = 5;
-        distfix = next;
-        bits = 5;
-        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
-
-        /* do this just once */
-        virgin = 0;
-    }
-#else /* !BUILDFIXED */
-#   include "inffixed.h"
-#endif /* BUILDFIXED */
-    state->lencode = lenfix;
-    state->lenbits = 9;
-    state->distcode = distfix;
-    state->distbits = 5;
-}
-
-/* Macros for inflateBack(): */
-
-/* Load returned state from inflate_fast() */
-#define LOAD() \
-    do { \
-        put = strm->next_out; \
-        left = strm->avail_out; \
-        next = strm->next_in; \
-        have = strm->avail_in; \
-        hold = state->hold; \
-        bits = state->bits; \
-    } while (0)
-
-/* Set state from registers for inflate_fast() */
-#define RESTORE() \
-    do { \
-        strm->next_out = put; \
-        strm->avail_out = left; \
-        strm->next_in = next; \
-        strm->avail_in = have; \
-        state->hold = hold; \
-        state->bits = bits; \
-    } while (0)
-
-/* Clear the input bit accumulator */
-#define INITBITS() \
-    do { \
-        hold = 0; \
-        bits = 0; \
-    } while (0)
-
-/* Assure that some input is available.  If input is requested, but denied,
-   then return a Z_BUF_ERROR from inflateBack(). */
-#define PULL() \
-    do { \
-        if (have == 0) { \
-            have = in(in_desc, &next); \
-            if (have == 0) { \
-                next = Z_NULL; \
-                ret = Z_BUF_ERROR; \
-                goto inf_leave; \
-            } \
-        } \
-    } while (0)
-
-/* Get a byte of input into the bit accumulator, or return from inflateBack()
-   with an error if there is no input available. */
-#define PULLBYTE() \
-    do { \
-        PULL(); \
-        have--; \
-        hold += (unsigned long)(*next++) << bits; \
-        bits += 8; \
-    } while (0)
-
-/* Assure that there are at least n bits in the bit accumulator.  If there is
-   not enough available input to do that, then return from inflateBack() with
-   an error. */
-#define NEEDBITS(n) \
-    do { \
-        while (bits < (unsigned)(n)) \
-            PULLBYTE(); \
-    } while (0)
-
-/* Return the low n bits of the bit accumulator (n < 16) */
-#define BITS(n) \
-    ((unsigned)hold & ((1U << (n)) - 1))
-
-/* Remove n bits from the bit accumulator */
-#define DROPBITS(n) \
-    do { \
-        hold >>= (n); \
-        bits -= (unsigned)(n); \
-    } while (0)
-
-/* Remove zero to seven bits as needed to go to a byte boundary */
-#define BYTEBITS() \
-    do { \
-        hold >>= bits & 7; \
-        bits -= bits & 7; \
-    } while (0)
-
-/* Assure that some output space is available, by writing out the window
-   if it's full.  If the write fails, return from inflateBack() with a
-   Z_BUF_ERROR. */
-#define ROOM() \
-    do { \
-        if (left == 0) { \
-            put = state->window; \
-            left = state->wsize; \
-            state->whave = left; \
-            if (out(out_desc, put, left)) { \
-                ret = Z_BUF_ERROR; \
-                goto inf_leave; \
-            } \
-        } \
-    } while (0)
-
-/*
-   strm provides the memory allocation functions and window buffer on input,
-   and provides information on the unused input on return.  For Z_DATA_ERROR
-   returns, strm will also provide an error message.
-
-   in() and out() are the call-back input and output functions.  When
-   inflateBack() needs more input, it calls in().  When inflateBack() has
-   filled the window with output, or when it completes with data in the
-   window, it calls out() to write out the data.  The application must not
-   change the provided input until in() is called again or inflateBack()
-   returns.  The application must not change the window/output buffer until
-   inflateBack() returns.
-
-   in() and out() are called with a descriptor parameter provided in the
-   inflateBack() call.  This parameter can be a structure that provides the
-   information required to do the read or write, as well as accumulated
-   information on the input and output such as totals and check values.
-
-   in() should return zero on failure.  out() should return non-zero on
-   failure.  If either in() or out() fails, than inflateBack() returns a
-   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
-   was in() or out() that caused in the error.  Otherwise,  inflateBack()
-   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
-   error, or Z_MEM_ERROR if it could not allocate memory for the state.
-   inflateBack() can also return Z_STREAM_ERROR if the input parameters
-   are not correct, i.e. strm is Z_NULL or the state was not initialized.
- */
-int ZEXPORT inflateBack(z_streamp strm, in_func in, void FAR *in_desc,
-                        out_func out, void FAR *out_desc) {
-    struct inflate_state FAR *state;
-    z_const unsigned char FAR *next;    /* next input */
-    unsigned char FAR *put;     /* next output */
-    unsigned have, left;        /* available input and output */
-    unsigned long hold;         /* bit buffer */
-    unsigned bits;              /* bits in bit buffer */
-    unsigned copy;              /* number of stored or match bytes to copy */
-    unsigned char FAR *from;    /* where to copy match bytes from */
-    code here;                  /* current decoding table entry */
-    code last;                  /* parent table entry */
-    unsigned len;               /* length to copy for repeats, bits to drop */
-    int ret;                    /* return code */
-    static const unsigned short order[19] = /* permutation of code lengths */
-        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-    /* Check that the strm exists and that the state was initialized */
-    if (strm == Z_NULL || strm->state == Z_NULL)
-        return Z_STREAM_ERROR;
-    state = (struct inflate_state FAR *)strm->state;
-
-    /* Reset the state */
-    strm->msg = Z_NULL;
-    state->mode = TYPE;
-    state->last = 0;
-    state->whave = 0;
-    next = strm->next_in;
-    have = next != Z_NULL ? strm->avail_in : 0;
-    hold = 0;
-    bits = 0;
-    put = state->window;
-    left = state->wsize;
-
-    /* Inflate until end of block marked as last */
-    for (;;)
-        switch (state->mode) {
-        case TYPE:
-            /* determine and dispatch block type */
-            if (state->last) {
-                BYTEBITS();
-                state->mode = DONE;
-                break;
-            }
-            NEEDBITS(3);
-            state->last = BITS(1);
-            DROPBITS(1);
-            switch (BITS(2)) {
-            case 0:                             /* stored block */
-                Tracev((stderr, "inflate:     stored block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = STORED;
-                break;
-            case 1:                             /* fixed block */
-                fixedtables(state);
-                Tracev((stderr, "inflate:     fixed codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = LEN;              /* decode codes */
-                break;
-            case 2:                             /* dynamic block */
-                Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                        state->last ? " (last)" : ""));
-                state->mode = TABLE;
-                break;
-            case 3:
-                strm->msg = (char *)"invalid block type";
-                state->mode = BAD;
-            }
-            DROPBITS(2);
-            break;
-
-        case STORED:
-            /* get and verify stored block length */
-            BYTEBITS();                         /* go to byte boundary */
-            NEEDBITS(32);
-            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
-                strm->msg = (char *)"invalid stored block lengths";
-                state->mode = BAD;
-                break;
-            }
-            state->length = (unsigned)hold & 0xffff;
-            Tracev((stderr, "inflate:       stored length %u\n",
-                    state->length));
-            INITBITS();
-
-            /* copy stored block from input to output */
-            while (state->length != 0) {
-                copy = state->length;
-                PULL();
-                ROOM();
-                if (copy > have) copy = have;
-                if (copy > left) copy = left;
-                zmemcpy(put, next, copy);
-                have -= copy;
-                next += copy;
-                left -= copy;
-                put += copy;
-                state->length -= copy;
-            }
-            Tracev((stderr, "inflate:       stored end\n"));
-            state->mode = TYPE;
-            break;
-
-        case TABLE:
-            /* get dynamic table entries descriptor */
-            NEEDBITS(14);
-            state->nlen = BITS(5) + 257;
-            DROPBITS(5);
-            state->ndist = BITS(5) + 1;
-            DROPBITS(5);
-            state->ncode = BITS(4) + 4;
-            DROPBITS(4);
-#ifndef PKZIP_BUG_WORKAROUND
-            if (state->nlen > 286 || state->ndist > 30) {
-                strm->msg = (char *)"too many length or distance symbols";
-                state->mode = BAD;
-                break;
-            }
-#endif
-            Tracev((stderr, "inflate:       table sizes ok\n"));
-
-            /* get code length code lengths (not a typo) */
-            state->have = 0;
-            while (state->have < state->ncode) {
-                NEEDBITS(3);
-                state->lens[order[state->have++]] = (unsigned short)BITS(3);
-                DROPBITS(3);
-            }
-            while (state->have < 19)
-                state->lens[order[state->have++]] = 0;
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 7;
-            ret = inflate_table(CODES, state->lens, 19, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid code lengths set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       code lengths ok\n"));
-
-            /* get length and distance code code lengths */
-            state->have = 0;
-            while (state->have < state->nlen + state->ndist) {
-                for (;;) {
-                    here = state->lencode[BITS(state->lenbits)];
-                    if ((unsigned)(here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                if (here.val < 16) {
-                    DROPBITS(here.bits);
-                    state->lens[state->have++] = here.val;
-                }
-                else {
-                    if (here.val == 16) {
-                        NEEDBITS(here.bits + 2);
-                        DROPBITS(here.bits);
-                        if (state->have == 0) {
-                            strm->msg = (char *)"invalid bit length repeat";
-                            state->mode = BAD;
-                            break;
-                        }
-                        len = (unsigned)(state->lens[state->have - 1]);
-                        copy = 3 + BITS(2);
-                        DROPBITS(2);
-                    }
-                    else if (here.val == 17) {
-                        NEEDBITS(here.bits + 3);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 3 + BITS(3);
-                        DROPBITS(3);
-                    }
-                    else {
-                        NEEDBITS(here.bits + 7);
-                        DROPBITS(here.bits);
-                        len = 0;
-                        copy = 11 + BITS(7);
-                        DROPBITS(7);
-                    }
-                    if (state->have + copy > state->nlen + state->ndist) {
-                        strm->msg = (char *)"invalid bit length repeat";
-                        state->mode = BAD;
-                        break;
-                    }
-                    while (copy--)
-                        state->lens[state->have++] = (unsigned short)len;
-                }
-            }
-
-            /* handle error breaks in while */
-            if (state->mode == BAD) break;
-
-            /* check for end-of-block code (better have one) */
-            if (state->lens[256] == 0) {
-                strm->msg = (char *)"invalid code -- missing end-of-block";
-                state->mode = BAD;
-                break;
-            }
-
-            /* build code tables -- note: do not change the lenbits or distbits
-               values here (9 and 6) without reading the comments in inftrees.h
-               concerning the ENOUGH constants, which depend on those values */
-            state->next = state->codes;
-            state->lencode = (code const FAR *)(state->next);
-            state->lenbits = 9;
-            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
-                                &(state->lenbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid literal/lengths set";
-                state->mode = BAD;
-                break;
-            }
-            state->distcode = (code const FAR *)(state->next);
-            state->distbits = 6;
-            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
-                            &(state->next), &(state->distbits), state->work);
-            if (ret) {
-                strm->msg = (char *)"invalid distances set";
-                state->mode = BAD;
-                break;
-            }
-            Tracev((stderr, "inflate:       codes ok\n"));
-            state->mode = LEN;
-                /* fallthrough */
-
-        case LEN:
-            /* use inflate_fast() if we have enough input and output */
-            if (have >= 6 && left >= 258) {
-                RESTORE();
-                if (state->whave < state->wsize)
-                    state->whave = state->wsize - left;
-                inflate_fast(strm, state->wsize);
-                LOAD();
-                break;
-            }
-
-            /* get a literal, length, or end-of-block code */
-            for (;;) {
-                here = state->lencode[BITS(state->lenbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if (here.op && (here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->lencode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(here.bits);
-            state->length = (unsigned)here.val;
-
-            /* process literal */
-            if (here.op == 0) {
-                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
-                        "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", here.val));
-                ROOM();
-                *put++ = (unsigned char)(state->length);
-                left--;
-                state->mode = LEN;
-                break;
-            }
-
-            /* process end of block */
-            if (here.op & 32) {
-                Tracevv((stderr, "inflate:         end of block\n"));
-                state->mode = TYPE;
-                break;
-            }
-
-            /* invalid code */
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid literal/length code";
-                state->mode = BAD;
-                break;
-            }
-
-            /* length code -- get extra bits, if any */
-            state->extra = (unsigned)(here.op) & 15;
-            if (state->extra != 0) {
-                NEEDBITS(state->extra);
-                state->length += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            Tracevv((stderr, "inflate:         length %u\n", state->length));
-
-            /* get distance code */
-            for (;;) {
-                here = state->distcode[BITS(state->distbits)];
-                if ((unsigned)(here.bits) <= bits) break;
-                PULLBYTE();
-            }
-            if ((here.op & 0xf0) == 0) {
-                last = here;
-                for (;;) {
-                    here = state->distcode[last.val +
-                            (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + here.bits) <= bits) break;
-                    PULLBYTE();
-                }
-                DROPBITS(last.bits);
-            }
-            DROPBITS(here.bits);
-            if (here.op & 64) {
-                strm->msg = (char *)"invalid distance code";
-                state->mode = BAD;
-                break;
-            }
-            state->offset = (unsigned)here.val;
-
-            /* get distance extra bits, if any */
-            state->extra = (unsigned)(here.op) & 15;
-            if (state->extra != 0) {
-                NEEDBITS(state->extra);
-                state->offset += BITS(state->extra);
-                DROPBITS(state->extra);
-            }
-            if (state->offset > state->wsize - (state->whave < state->wsize ?
-                                                left : 0)) {
-                strm->msg = (char *)"invalid distance too far back";
-                state->mode = BAD;
-                break;
-            }
-            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
-
-            /* copy match from window to output */
-            do {
-                ROOM();
-                copy = state->wsize - state->offset;
-                if (copy < left) {
-                    from = put + copy;
-                    copy = left - copy;
-                }
-                else {
-                    from = put - state->offset;
-                    copy = left;
-                }
-                if (copy > state->length) copy = state->length;
-                state->length -= copy;
-                left -= copy;
-                do {
-                    *put++ = *from++;
-                } while (--copy);
-            } while (state->length != 0);
-            break;
-
-        case DONE:
-            /* inflate stream terminated properly */
-            ret = Z_STREAM_END;
-            goto inf_leave;
-
-        case BAD:
-            ret = Z_DATA_ERROR;
-            goto inf_leave;
-
-        default:
-            /* can't happen, but makes compilers happy */
-            ret = Z_STREAM_ERROR;
-            goto inf_leave;
-        }
-
-    /* Write leftover output and return unused input */
-  inf_leave:
-    if (left < state->wsize) {
-        if (out(out_desc, state->window, state->wsize - left) &&
-            ret == Z_STREAM_END)
-            ret = Z_BUF_ERROR;
-    }
-    strm->next_in = next;
-    strm->avail_in = have;
-    return ret;
-}
-
-int ZEXPORT inflateBackEnd(z_streamp strm) {
-    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
-        return Z_STREAM_ERROR;
-    ZFREE(strm, strm->state);
-    strm->state = Z_NULL;
-    Tracev((stderr, "inflate: end\n"));
-    return Z_OK;
-}