@cpp.js/package-zlib 1.0.0-beta.20 → 1.0.0-beta.22

package/.cppjs/build/source/examples/gzlog.h

@@ -1,91 +0,0 @@
-/* gzlog.h
-  Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved
-  version 2.2, 14 Aug 2012
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-/* Version History:
-   1.0  26 Nov 2004  First version
-   2.0  25 Apr 2008  Complete redesign for recovery of interrupted operations
-                     Interface changed slightly in that now path is a prefix
-                     Compression now occurs as needed during gzlog_write()
-                     gzlog_write() now always leaves the log file as valid gzip
-   2.1   8 Jul 2012  Fix argument checks in gzlog_compress() and gzlog_write()
-   2.2  14 Aug 2012  Clean up signed comparisons
- */
-
-/*
-   The gzlog object allows writing short messages to a gzipped log file,
-   opening the log file locked for small bursts, and then closing it.  The log
-   object works by appending stored (uncompressed) data to the gzip file until
-   1 MB has been accumulated.  At that time, the stored data is compressed, and
-   replaces the uncompressed data in the file.  The log file is truncated to
-   its new size at that time.  After each write operation, the log file is a
-   valid gzip file that can decompressed to recover what was written.
-
-   The gzlog operations can be interrupted at any point due to an application or
-   system crash, and the log file will be recovered the next time the log is
-   opened with gzlog_open().
- */
-
-#ifndef GZLOG_H
-#define GZLOG_H
-
-/* gzlog object type */
-typedef void gzlog;
-
-/* Open a gzlog object, creating the log file if it does not exist.  Return
-   NULL on error.  Note that gzlog_open() could take a while to complete if it
-   has to wait to verify that a lock is stale (possibly for five minutes), or
-   if there is significant contention with other instantiations of this object
-   when locking the resource.  path is the prefix of the file names created by
-   this object.  If path is "foo", then the log file will be "foo.gz", and
-   other auxiliary files will be created and destroyed during the process:
-   "foo.dict" for a compression dictionary, "foo.temp" for a temporary (next)
-   dictionary, "foo.add" for data being added or compressed, "foo.lock" for the
-   lock file, and "foo.repairs" to log recovery operations performed due to
-   interrupted gzlog operations.  A gzlog_open() followed by a gzlog_close()
-   will recover a previously interrupted operation, if any. */
-gzlog *gzlog_open(char *path);
-
-/* Write to a gzlog object.  Return zero on success, -1 if there is a file i/o
-   error on any of the gzlog files (this should not happen if gzlog_open()
-   succeeded, unless the device has run out of space or leftover auxiliary
-   files have permissions or ownership that prevent their use), -2 if there is
-   a memory allocation failure, or -3 if the log argument is invalid (e.g. if
-   it was not created by gzlog_open()).  This function will write data to the
-   file uncompressed, until 1 MB has been accumulated, at which time that data
-   will be compressed.  The log file will be a valid gzip file upon successful
-   return. */
-int gzlog_write(gzlog *log, void *data, size_t len);
-
-/* Force compression of any uncompressed data in the log.  This should be used
-   sparingly, if at all.  The main application would be when a log file will
-   not be appended to again.  If this is used to compress frequently while
-   appending, it will both significantly increase the execution time and
-   reduce the compression ratio.  The return codes are the same as for
-   gzlog_write(). */
-int gzlog_compress(gzlog *log);
-
-/* Close a gzlog object.  Return zero on success, -3 if the log argument is
-   invalid.  The log object is freed, and so cannot be referenced again. */
-int gzlog_close(gzlog *log);
-
-#endif

package/.cppjs/build/source/examples/gznorm.c

@@ -1,470 +0,0 @@
-/* gznorm.c -- normalize a gzip stream
- * Copyright (C) 2018 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- * Version 1.0  7 Oct 2018  Mark Adler */
-
-// gznorm takes a gzip stream, potentially containing multiple members, and
-// converts it to a gzip stream with a single member. In addition the gzip
-// header is normalized, removing the file name and time stamp, and setting the
-// other header contents (XFL, OS) to fixed values. gznorm does not recompress
-// the data, so it is fast, but no advantage is gained from the history that
-// could be available across member boundaries.
-
-#include <stdio.h>      // fread, fwrite, putc, fflush, ferror, fprintf,
-                        // vsnprintf, stdout, stderr, NULL, FILE
-#include <stdlib.h>     // malloc, free
-#include <string.h>     // strerror
-#include <errno.h>      // errno
-#include <stdarg.h>     // va_list, va_start, va_end
-#include "zlib.h"       // inflateInit2, inflate, inflateReset, inflateEnd,
-                        // z_stream, z_off_t, crc32_combine, Z_NULL, Z_BLOCK,
-                        // Z_OK, Z_STREAM_END, Z_BUF_ERROR, Z_DATA_ERROR,
-                        // Z_MEM_ERROR
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
-#  include <fcntl.h>
-#  include <io.h>
-#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-#  define SET_BINARY_MODE(file)
-#endif
-
-#define local static
-
-// printf to an allocated string. Return the string, or NULL if the printf or
-// allocation fails.
-local char *aprintf(char *fmt, ...) {
-    // Get the length of the result of the printf.
-    va_list args;
-    va_start(args, fmt);
-    int len = vsnprintf(NULL, 0, fmt, args);
-    va_end(args);
-    if (len < 0)
-        return NULL;
-
-    // Allocate the required space and printf to it.
-    char *str = malloc(len + 1);
-    if (str == NULL)
-        return NULL;
-    va_start(args, fmt);
-    vsnprintf(str, len + 1, fmt, args);
-    va_end(args);
-    return str;
-}
-
-// Return with an error, putting an allocated error message in *err. Doing an
-// inflateEnd() on an already ended state, or one with state set to Z_NULL, is
-// permitted.
-#define BYE(...) \
-    do { \
-        inflateEnd(&strm); \
-        *err = aprintf(__VA_ARGS__); \
-        return 1; \
-    } while (0)
-
-// Chunk size for buffered reads and for decompression. Twice this many bytes
-// will be allocated on the stack by gzip_normalize(). Must fit in an unsigned.
-#define CHUNK 16384
-
-// Read a gzip stream from in and write an equivalent normalized gzip stream to
-// out. If given no input, an empty gzip stream will be written. If successful,
-// 0 is returned, and *err is set to NULL. On error, 1 is returned, where the
-// details of the error are returned in *err, a pointer to an allocated string.
-//
-// The input may be a stream with multiple gzip members, which is converted to
-// a single gzip member on the output. Each gzip member is decompressed at the
-// level of deflate blocks. This enables clearing the last-block bit, shifting
-// the compressed data to concatenate to the previous member's compressed data,
-// which can end at an arbitrary bit boundary, and identifying stored blocks in
-// order to resynchronize those to byte boundaries. The deflate compressed data
-// is terminated with a 10-bit empty fixed block. If any members on the input
-// end with a 10-bit empty fixed block, then that block is excised from the
-// stream. This avoids appending empty fixed blocks for every normalization,
-// and assures that gzip_normalize applied a second time will not change the
-// input. The pad bits after stored block headers and after the final deflate
-// block are all forced to zeros.
-local int gzip_normalize(FILE *in, FILE *out, char **err) {
-    // initialize the inflate engine to process a gzip member
-    z_stream strm;
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    strm.avail_in = 0;
-    strm.next_in = Z_NULL;
-    if (inflateInit2(&strm, 15 + 16) != Z_OK)
-        BYE("out of memory");
-
-    // State while processing the input gzip stream.
-    enum {              // BETWEEN -> HEAD -> BLOCK -> TAIL -> BETWEEN -> ...
-        BETWEEN,        // between gzip members (must end in this state)
-        HEAD,           // reading a gzip header
-        BLOCK,          // reading deflate blocks
-        TAIL            // reading a gzip trailer
-    } state = BETWEEN;              // current component being processed
-    unsigned long crc = 0;          // accumulated CRC of uncompressed data
-    unsigned long len = 0;          // accumulated length of uncompressed data
-    unsigned long buf = 0;          // deflate stream bit buffer of num bits
-    int num = 0;                    // number of bits in buf (at bottom)
-
-    // Write a canonical gzip header (no mod time, file name, comment, extra
-    // block, or extra flags, and OS is marked as unknown).
-    fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out);
-
-    // Process the gzip stream from in until reaching the end of the input,
-    // encountering invalid input, or experiencing an i/o error.
-    int more;                       // true if not at the end of the input
-    do {
-        // State inside this loop.
-        unsigned char *put;         // next input buffer location to process
-        int prev;                   // number of bits from previous block in
-                                    // the bit buffer, or -1 if not at the
-                                    // start of a block
-        unsigned long long memb;    // uncompressed length of member
-        size_t tail;                // number of trailer bytes read (0..8)
-        unsigned long part;         // accumulated trailer component
-
-        // Get the next chunk of input from in.
-        unsigned char dat[CHUNK];
-        strm.avail_in = fread(dat, 1, CHUNK, in);
-        if (strm.avail_in == 0)
-            break;
-        more = strm.avail_in == CHUNK;
-        strm.next_in = put = dat;
-
-        // Run that chunk of input through the inflate engine to exhaustion.
-        do {
-            // At this point it is assured that strm.avail_in > 0.
-
-            // Inflate until the end of a gzip component (header, deflate
-            // block, trailer) is reached, or until all of the chunk is
-            // consumed. The resulting decompressed data is discarded, though
-            // the total size of the decompressed data in each member is
-            // tracked, for the calculation of the total CRC.
-            do {
-                // inflate and handle any errors
-                unsigned char scrap[CHUNK];
-                strm.avail_out = CHUNK;
-                strm.next_out = scrap;
-                int ret = inflate(&strm, Z_BLOCK);
-                if (ret == Z_MEM_ERROR)
-                    BYE("out of memory");
-                if (ret == Z_DATA_ERROR)
-                    BYE("input invalid: %s", strm.msg);
-                if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_STREAM_END)
-                    BYE("internal error");
-
-                // Update the number of uncompressed bytes generated in this
-                // member. The actual count (not modulo 2^32) is required to
-                // correctly compute the total CRC.
-                unsigned got = CHUNK - strm.avail_out;
-                memb += got;
-                if (memb < got)
-                    BYE("overflow error");
-
-                // Continue to process this chunk until it is consumed, or
-                // until the end of a component (header, deflate block, or
-                // trailer) is reached.
-            } while (strm.avail_out == 0 && (strm.data_type & 0x80) == 0);
-
-            // Since strm.avail_in was > 0 for the inflate call, some input was
-            // just consumed. It is therefore assured that put < strm.next_in.
-
-            // Disposition the consumed component or part of a component.
-            switch (state) {
-                case BETWEEN:
-                    state = HEAD;
-                    // Fall through to HEAD when some or all of the header is
-                    // processed.
-
-                case HEAD:
-                    // Discard the header.
-                    if (strm.data_type & 0x80) {
-                        // End of header reached -- deflate blocks follow.
-                        put = strm.next_in;
-                        prev = num;
-                        memb = 0;
-                        state = BLOCK;
-                    }
-                    break;
-
-                case BLOCK:
-                    // Copy the deflate stream to the output, but with the
-                    // last-block-bit cleared. Re-synchronize stored block
-                    // headers to the output byte boundaries. The bytes at
-                    // put..strm.next_in-1 is the compressed data that has been
-                    // processed and is ready to be copied to the output.
-
-                    // At this point, it is assured that new compressed data is
-                    // available, i.e., put < strm.next_in. If prev is -1, then
-                    // that compressed data starts in the middle of a deflate
-                    // block. If prev is not -1, then the bits in the bit
-                    // buffer, possibly combined with the bits in *put, contain
-                    // the three-bit header of the new deflate block. In that
-                    // case, prev is the number of bits from the previous block
-                    // that remain in the bit buffer. Since num is the number
-                    // of bits in the bit buffer, we have that num - prev is
-                    // the number of bits from the new block currently in the
-                    // bit buffer.
-
-                    // If strm.data_type & 0xc0 is 0x80, then the last byte of
-                    // the available compressed data includes the last bits of
-                    // the end of a deflate block. In that case, that last byte
-                    // also has strm.data_type & 0x1f bits of the next deflate
-                    // block, in the range 0..7. If strm.data_type & 0xc0 is
-                    // 0xc0, then the last byte of the compressed data is the
-                    // end of the deflate stream, followed by strm.data_type &
-                    // 0x1f pad bits, also in the range 0..7.
-
-                    // Set bits to the number of bits not yet consumed from the
-                    // last byte. If we are at the end of the block, bits is
-                    // either the number of bits in the last byte belonging to
-                    // the next block, or the number of pad bits after the
-                    // final block. In either of those cases, bits is in the
-                    // range 0..7.
-                    ;                   // (required due to C syntax oddity)
-                    int bits = strm.data_type & 0x1f;
-
-                    if (prev != -1) {
-                        // We are at the start of a new block. Clear the last
-                        // block bit, and check for special cases. If it is a
-                        // stored block, then emit the header and pad to the
-                        // next byte boundary. If it is a final, empty fixed
-                        // block, then excise it.
-
-                        // Some or all of the three header bits for this block
-                        // may already be in the bit buffer. Load any remaining
-                        // header bits into the bit buffer.
-                        if (num - prev < 3) {
-                            buf += (unsigned long)*put++ << num;
-                            num += 8;
-                        }
-
-                        // Set last to have a 1 in the position of the last
-                        // block bit in the bit buffer.
-                        unsigned long last = (unsigned long)1 << prev;
-
-                        if (((buf >> prev) & 7) == 3) {
-                            // This is a final fixed block. Load at least ten
-                            // bits from this block, including the header, into
-                            // the bit buffer. We already have at least three,
-                            // so at most one more byte needs to be loaded.
-                            if (num - prev < 10) {
-                                if (put == strm.next_in)
-                                    // Need to go get and process more input.
-                                    // We'll end up back here to finish this.
-                                    break;
-                                buf += (unsigned long)*put++ << num;
-                                num += 8;
-                            }
-                            if (((buf >> prev) & 0x3ff) == 3) {
-                                // That final fixed block is empty. Delete it
-                                // to avoid adding an empty block every time a
-                                // gzip stream is normalized.
-                                num = prev;
-                                buf &= last - 1;    // zero the pad bits
-                            }
-                        }
-                        else if (((buf >> prev) & 6) == 0) {
-                            // This is a stored block. Flush to the next
-                            // byte boundary after the three-bit header.
-                            num = (prev + 10) & ~7;
-                            buf &= last - 1;        // zero the pad bits
-                        }
-
-                        // Clear the last block bit.
-                        buf &= ~last;
-
-                        // Write out complete bytes in the bit buffer.
-                        while (num >= 8) {
-                            putc(buf, out);
-                            buf >>= 8;
-                            num -= 8;
-                        }
-
-                        // If no more bytes left to process, then we have
-                        // consumed the byte that had bits from the next block.
-                        if (put == strm.next_in)
-                            bits = 0;
-                    }
-
-                    // We are done handling the deflate block header. Now copy
-                    // all or almost all of the remaining compressed data that
-                    // has been processed so far. Don't copy one byte at the
-                    // end if it contains bits from the next deflate block or
-                    // pad bits at the end of a deflate block.
-
-                    // mix is 1 if we are at the end of a deflate block, and if
-                    // some of the bits in the last byte follow this block. mix
-                    // is 0 if we are in the middle of a deflate block, if the
-                    // deflate block ended on a byte boundary, or if all of the
-                    // compressed data processed so far has been consumed.
-                    int mix = (strm.data_type & 0x80) && bits;
-
-                    // Copy all of the processed compressed data to the output,
-                    // except for the last byte if it contains bits from the
-                    // next deflate block or pad bits at the end of the deflate
-                    // stream. Copy the data after shifting in num bits from
-                    // buf in front of it, leaving num bits from the end of the
-                    // compressed data in buf when done.
-                    unsigned char *end = strm.next_in - mix;
-                    if (put < end) {
-                        if (num)
-                            // Insert num bits from buf before the data being
-                            // copied.
-                            do {
-                                buf += (unsigned)(*put++) << num;
-                                putc(buf, out);
-                                buf >>= 8;
-                            } while (put < end);
-                        else {
-                            // No shifting needed -- write directly.
-                            fwrite(put, 1, end - put, out);
-                            put = end;
-                        }
-                    }
-
-                    // Process the last processed byte if it wasn't written.
-                    if (mix) {
-                        // Load the last byte into the bit buffer.
-                        buf += (unsigned)(*put++) << num;
-                        num += 8;
-
-                        if (strm.data_type & 0x40) {
-                            // We are at the end of the deflate stream and
-                            // there are bits pad bits. Discard the pad bits
-                            // and write a byte to the output, if available.
-                            // Leave the num bits left over in buf to prepend
-                            // to the next deflate stream.
-                            num -= bits;
-                            if (num >= 8) {
-                                putc(buf, out);
-                                num -= 8;
-                                buf >>= 8;
-                            }
-
-                            // Force the pad bits in the bit buffer to zeros.
-                            buf &= ((unsigned long)1 << num) - 1;
-
-                            // Don't need to set prev here since going to TAIL.
-                        }
-                        else
-                            // At the end of an internal deflate block. Leave
-                            // the last byte in the bit buffer to examine on
-                            // the next entry to BLOCK, when more bits from the
-                            // next block will be available.
-                            prev = num - bits;      // number of bits in buffer
-                                                    // from current block
-                    }
-
-                    // Don't have a byte left over, so we are in the middle of
-                    // a deflate block, or the deflate block ended on a byte
-                    // boundary. Set prev appropriately for the next entry into
-                    // BLOCK.
-                    else if (strm.data_type & 0x80)
-                        // The block ended on a byte boundary, so no header
-                        // bits are in the bit buffer.
-                        prev = num;
-                    else
-                        // In the middle of a deflate block, so no header here.
-                        prev = -1;
-
-                    // Check for the end of the deflate stream.
-                    if ((strm.data_type & 0xc0) == 0xc0) {
-                        // That ends the deflate stream on the input side, the
-                        // pad bits were discarded, and any remaining bits from
-                        // the last block in the stream are saved in the bit
-                        // buffer to prepend to the next stream. Process the
-                        // gzip trailer next.
-                        tail = 0;
-                        part = 0;
-                        state = TAIL;
-                    }
-                    break;
-
-                case TAIL:
-                    // Accumulate available trailer bytes to update the total
-                    // CRC and the total uncompressed length.
-                    do {
-                        part = (part >> 8) + ((unsigned long)(*put++) << 24);
-                        tail++;
-                        if (tail == 4) {
-                            // Update the total CRC.
-                            z_off_t len2 = memb;
-                            if (len2 < 0 || (unsigned long long)len2 != memb)
-                                BYE("overflow error");
-                            crc = crc ? crc32_combine(crc, part, len2) : part;
-                            part = 0;
-                        }
-                        else if (tail == 8) {
-                            // Update the total uncompressed length. (It's ok
-                            // if this sum is done modulo 2^32.)
-                            len += part;
-
-                            // At the end of a member. Set up to inflate an
-                            // immediately following gzip member. (If we made
-                            // it this far, then the trailer was valid.)
-                            if (inflateReset(&strm) != Z_OK)
-                                BYE("internal error");
-                            state = BETWEEN;
-                            break;
-                        }
-                    } while (put < strm.next_in);
-                    break;
-            }
-
-            // Process the input buffer until completely consumed.
-        } while (strm.avail_in > 0);
-
-        // Process input until end of file, invalid input, or i/o error.
-    } while (more);
-
-    // Done with the inflate engine.
-    inflateEnd(&strm);
-
-    // Verify the validity of the input.
-    if (state != BETWEEN)
-        BYE("input invalid: incomplete gzip stream");
-
-    // Write the remaining deflate stream bits, followed by a terminating
-    // deflate fixed block.
-    buf += (unsigned long)3 << num;
-    putc(buf, out);
-    putc(buf >> 8, out);
-    if (num > 6)
-        putc(0, out);
-
-    // Write the gzip trailer, which is the CRC and the uncompressed length
-    // modulo 2^32, both in little-endian order.
-    putc(crc, out);
-    putc(crc >> 8, out);
-    putc(crc >> 16, out);
-    putc(crc >> 24, out);
-    putc(len, out);
-    putc(len >> 8, out);
-    putc(len >> 16, out);
-    putc(len >> 24, out);
-    fflush(out);
-
-    // Check for any i/o errors.
-    if (ferror(in) || ferror(out))
-        BYE("i/o error: %s", strerror(errno));
-
-    // All good!
-    *err = NULL;
-    return 0;
-}
-
-// Normalize the gzip stream on stdin, writing the result to stdout.
-int main(void) {
-    // Avoid end-of-line conversions on evil operating systems.
-    SET_BINARY_MODE(stdin);
-    SET_BINARY_MODE(stdout);
-
-    // Normalize from stdin to stdout, returning 1 on error, 0 if ok.
-    char *err;
-    int ret = gzip_normalize(stdin, stdout, &err);
-    if (ret)
-        fprintf(stderr, "gznorm error: %s\n", err);
-    free(err);
-    return ret;
-}