@automattic/vip 4.1.4 → 4.1.6

package/internal/devenv/importdata.go

@@ -1,491 +0,0 @@
-package devenv
-
-import (
-	"compress/gzip"
-	"context"
-	"errors"
-	"fmt"
-	"io"
-	"os"
-	"path/filepath"
-	"runtime"
-	"strconv"
-	"strings"
-
-	"github.com/Automattic/vip/internal/appctx"
-	"github.com/Automattic/vip/internal/debuglog"
-	"github.com/Automattic/vip/internal/devenv/dockercli"
-	"github.com/Automattic/vip/internal/searchreplace"
-)
-
-// containerUploadsPath is where WordPress uploads live in the php container.
-const containerUploadsPath = "/wp/wp-content/uploads"
-
-// ImportOptions controls `import sql`.
-type ImportOptions struct {
-	// SearchReplace pairs ("from,to"), applied to the SQL before import.
-	SearchReplace []string
-	// InPlace rewrites the source SQL file with the search-replace result
-	// instead of importing a throwaway copy.
-	InPlace bool
-	// Quiet suppresses informational output during import.
-	Quiet bool
-	// SkipValidate skips BOTH pre-import checks, exactly as Node's one flag
-	// does (dev-env-import-sql.ts:83-101):
-	//   1. the running-environment gate (php + database must be up), and
-	//   2. the SQL-file validation suite (see importvalidate.go).
-	// `dev-env sync sql` sets it, matching Node's runImport
-	// (dev-env-sync-sql.ts:333-336) — the SQL it imports is an export it just
-	// produced and search-replaced itself.
-	SkipValidate bool
-	// SkipReindex skips the post-import Elasticsearch reindex (Node
-	// `-k/--skip-reindex`, dev-env-import-sql.ts:130). Wired.
-	SkipReindex bool
-	// Out receives the informational output Node prints ("Success: Database
-	// imported.", the data-cleanup warning). Defaults to os.Stdout.
-	Out io.Writer
-	// Confirm answers the irreversible --in-place question. Injected by the
-	// cobra layer so the prompt can see the --non-interactive FLAG and not
-	// just the VIP_NON_INTERACTIVE env var (this package has no command to
-	// hand to appctx). nil falls back to the command-less prompt.
-	Confirm func(message string, defaultYes bool) (bool, error)
-	// BatchMode pre-confirms the irreversible --in-place rewrite, exactly as
-	// Node's batchMode does (search-and-replace.ts:151 gates the prompt on
-	// `inPlace && ! batchMode`).
-	//
-	// `dev-env sync sql` sets it. Node never reaches this prompt from sync at
-	// all: runImport (dev-env-sync-sql.ts:333-338) passes inPlace/skipValidate/
-	// quiet/postImportSQL and NO searchReplace, because sync already ran its
-	// own streaming replacement (:199-208). Go instead hands the pairs to
-	// ImportSQL, so without this the prompt fires on a temp file the user
-	// never named — asking a meaningless question interactively, and in CI
-	// failing *after* the full production export has already been paid for.
-	BatchMode bool
-}
-
-// searchReplacePairs passes the user's "from,to" pairs through unchanged;
-// internal/searchreplace.Run already expects that comma form.
-func searchReplacePairs(pairs []string) []string { return pairs }
-
-// importCopyArgs builds `docker cp <host> <container>:<dest>`.
-func importCopyArgs(hostPath, containerID, destPath string) []string {
-	return []string{"cp", hostPath, containerID + ":" + destPath}
-}
-
-// importMediaCopyArgs builds `docker cp <srcDir>/. <container>:<uploads>` — the
-// trailing /. copies the directory's CONTENTS into uploads.
-func importMediaCopyArgs(srcDir, containerID string) []string {
-	// Use explicit string concat — filepath.Join cleans "/." away.
-	return []string{"cp", srcDir + "/.", containerID + ":" + containerUploadsPath}
-}
-
-// importSQLArgs builds the compose args for the SQL import:
-// `exec -T php wp --allow-root db import <path>`. The leading compose binary +
-// `-p <slug>` are supplied by Runner.Compose. `-T` disables TTY allocation
-// (stdin is a pipe/file, not a terminal). `--allow-root` is required because the
-// php container runs as root (Lando ran wp as a non-root user; the Go port does
-// not), so wp-cli would otherwise refuse with "YIKES! running as root".
-func importSQLArgs(containerPath string) []string {
-	return []string{"exec", "-T", phpService, "wp", "--allow-root", "db", "import", containerPath}
-}
-
-// myDumperImportArgs builds the compose exec args for importing a MyDumper dump.
-// Node's `db-myloader` is a Lando TOOLING alias (assets/dev-env.lando.template.yml.ejs),
-// not a wp-cli command: it runs the `myloader` binary (bundled in the php-fpm
-// image) against the dev-env database, streaming the dump on stdin. We invoke
-// the binary directly in the php service (root, the container default), with the
-// same flags getImportArgs appends (dev-env-import-sql.ts:156).
-func myDumperImportArgs(sourceDB string, quiet bool, threads int) []string {
-	args := []string{
-		"exec", "-T", phpService,
-		"myloader", "-h", "database", "-u", "wordpress", "-p", "wordpress", "--database", "wordpress",
-		// --drop-table (DROP mode by default): myloader 0.21.3 deprecated
-		// --overwrite-tables (it no longer drops -> "table already exists").
-		"--drop-table",
-	}
-	if sourceDB != "" {
-		args = append(args, "--source-db="+sourceDB)
-	}
-	args = append(args,
-		"--threads="+strconv.Itoa(threads),
-		"--max-threads-for-schema-creation=10",
-		"--max-threads-for-index-creation=10",
-		"--skip-triggers", "--skip-post", "--optimize-keys",
-		"--checksum=SKIP", "--metadata-refresh-interval=2000000", "--stream",
-	)
-	if quiet {
-		args = append(args, "--verbose=0")
-	} else {
-		args = append(args, "--verbose=3")
-	}
-	return args
-}
-
-// myDumperThreads mirrors Node's Math.max(os.cpus().length - 2, 1).
-func myDumperThreads() int {
-	if n := runtime.NumCPU() - 2; n > 1 {
-		return n
-	}
-	return 1
-}
-
-// importRunner is everything the import path needs from dockercli.Runner.
-// Depending on the interface (rather than the concrete runner) lets the whole
-// import sequence — including Node's post-import steps — be unit-tested with
-// no Docker daemon; *dockercli.Runner satisfies it.
-type importRunner interface {
-	composeExecer
-	Docker(ctx context.Context, args ...string) error
-	ComposeStdin(ctx context.Context, project string, stdin io.Reader, args ...string) error
-	ComposeOut(ctx context.Context, project string, args ...string) ([]byte, error)
-	ComposePS(ctx context.Context, project string) ([]dockercli.ServiceState, error)
-}
-
-// databaseService is the MariaDB service; phpService lives in devexec.go.
-const databaseService = "database"
-
-// requiredRunningServices are the two services Node checks before importing
-// (dev-env-import-sql.ts:84-89 and vip-dev-env-sync-sql.js:123-126).
-var requiredRunningServices = []string{phpService, databaseService}
-
-// ErrEnvironmentNotStarted carries Node's exact UserError text
-// (dev-env-import-sql.ts:92). Node routes UserError to exit.withError, which
-// prints "Error: <message>" and exits 1 — the same thing returning this does.
-var ErrEnvironmentNotStarted = errors.New("Environment needs to be started first")
-
-// EnvironmentIsRunning ports isContainerRunning (dev-environment-lando.ts:1056)
-// for the php + database pair: Lando asked Docker for containers labelled with
-// the compose project and service and filtered on status "running"; compose's
-// own `ps --format json --all` gives us the same information in one call.
-//
-// A ComposePS error is NOT translated into "needs to be started": that failure
-// means Docker itself is unreachable, which the user needs to see verbatim.
-func EnvironmentIsRunning(ctx context.Context, r importRunner, slug string) (bool, error) {
-	states, err := r.ComposePS(ctx, slug)
-	if err != nil {
-		return false, err
-	}
-	running := make(map[string]bool, len(states))
-	for _, s := range states {
-		if strings.EqualFold(s.State, "running") {
-			running[s.Service] = true
-		}
-	}
-	for _, svc := range requiredRunningServices {
-		if !running[svc] {
-			return false, nil
-		}
-	}
-	return true, nil
-}
-
-func ensureEnvironmentRunning(ctx context.Context, r importRunner, slug string) error {
-	up, err := EnvironmentIsRunning(ctx, r, slug)
-	if err != nil {
-		return err
-	}
-	if !up {
-		return ErrEnvironmentNotStarted
-	}
-	return nil
-}
-
-// containerID resolves the php service's container id for `docker cp` via
-// `docker compose -p <slug> ps -q <service>`, run (by ComposeOut) from the
-// env's materialized directory so compose finds its compose file.
-func containerID(ctx context.Context, r importRunner, slug, service string) (string, error) {
-	out, err := r.ComposeOut(ctx, slug, "ps", "-q", service)
-	if err != nil {
-		return "", err
-	}
-	id := strings.TrimRight(string(out), "\r\n")
-	if id == "" {
-		return "", fmt.Errorf("devenv: no running container for service %q (start the environment first)", service)
-	}
-	return id, nil
-}
-
-// ImportSQL imports a SQL file into a running env, optionally search-replacing
-// it first. The real docker cp + exec are exercised under the devenv_e2e gate.
-func ImportSQL(ctx context.Context, slug, file string, o ImportOptions) error {
-	debuglog.Printf(ctx, debugNamespace, "Will import SQL into environment %q: inPlace=%t searchReplacePairs=%d", slug, o.InPlace, len(o.SearchReplace))
-	// --in-place rewrites the user's own dump irreversibly. Node reaches
-	// searchAndReplace from here via resolveImportPath (dev-environment-core.ts:854)
-	// with no batchMode, so its "This operation is not reversible" confirm
-	// fires — unlike the platform `vip import sql` path, which pre-confirms and
-	// passes batchMode:true. Gate before anything else runs: no rewrite, no
-	// Docker call, nothing to undo if the answer is no. Declining exits 0 with
-	// the file untouched (Node's bare process.exit()); a context that cannot
-	// prompt is refused rather than silently proceeding or hanging in CI.
-	if o.InPlace && len(o.SearchReplace) > 0 && !o.BatchMode {
-		ask := o.Confirm
-		if ask == nil {
-			ask = func(message string, defaultYes bool) (bool, error) {
-				return appctx.Confirm(nil, message, defaultYes)
-			}
-		}
-		approved, err := ask(searchreplace.InPlaceConfirmMessage, false)
-		if err != nil {
-			return err
-		}
-		if !approved {
-			return nil
-		}
-	}
-
-	r, err := newRunner(ctx)
-	if err != nil {
-		return err
-	}
-	return importSQL(ctx, r, slug, file, o)
-}
-
-// importSQL is ImportSQL's body, parameterised over the runner so the full
-// sequence (import + Node's post-import steps) is testable without Docker.
-// The --in-place confirmation is handled by ImportSQL before this is reached.
-func importSQL(ctx context.Context, r importRunner, slug, file string, o ImportOptions) error {
-	out := o.Out
-	if out == nil {
-		out = os.Stdout
-	}
-
-	// Detect the dump type on the ORIGINAL file, before any rewrite or
-	// decompression — GetSqlDumpDetails reads through gzip transparently.
-	details, _ := searchreplace.GetSqlDumpDetails(file)
-
-	// Decompress a compressed dump to a plaintext temp file BEFORE using it,
-	// mirroring Node (dev-env-import-sql.ts:51-73). This is not optional:
-	// `myloader --stream` needs the raw `-- <file> <len>` stream framing, and
-	// piping it the gzip bytes instead makes it read zero files and hang
-	// forever (the loader threads block on work that never arrives). `wp db
-	// import` likewise needs plaintext SQL. Neither decompresses on its own.
-	switch comp, derr := dumpCompression(file); {
-	case derr != nil:
-		return derr
-	case comp == "gzip":
-		if !o.Quiet {
-			fmt.Fprintf(out, "Extracting the compressed file %s...\n", file)
-		}
-		plain, cleanup, derr := decompressDumpToTemp(file)
-		if derr != nil {
-			return derr
-		}
-		defer cleanup()
-		file = plain
-	case comp == "zip":
-		// Node detects zip as compressed but unzipFile only extracts gzip
-		// (client-file-uploader.ts:226-236), so a zip import fails the same way.
-		return fmt.Errorf("Error extracting the SQL file: unsupported file format: application/zip")
-	}
-
-	isMyDumper := details.Type == searchreplace.DumpTypeMyDumper
-
-	// Node runs the running-environment gate and the SQL validation under ONE
-	// `if ( ! this.options.skipValidate )` (dev-env-import-sql.ts:83-101), so
-	// --skip-validate skips both. The gate comes first here — before the
-	// search-replace rather than after it as in Node — so a stopped environment
-	// cannot leave the user with a rewritten (--in-place) dump and no import.
-	if !o.SkipValidate {
-		if err := ensureEnvironmentRunning(ctx, r, slug); err != nil {
-			return err
-		}
-	}
-
-	// Node's resolveImportPath: apply the file-level search-replace, then
-	// validate and import the RESULT (dev-env-import-sql.ts:76-96). MyDumper
-	// dumps are excluded — rewriting one invalidates the per-file byte markers
-	// `myloader --stream` relies on, so those pairs are applied with
-	// `wp search-replace` after the import instead (see importMyDumperDump).
-	resolved := file
-	if !isMyDumper && len(o.SearchReplace) > 0 {
-		res, err := searchreplace.RunContext(ctx, file, searchReplacePairs(o.SearchReplace), searchreplace.Options{InPlace: o.InPlace})
-		if err != nil {
-			return err
-		}
-		resolved = res.OutputFileName
-		// --in-place rewrites the original file; otherwise the result lives in
-		// a throwaway temp dir we clean up once the import is done.
-		if !o.InPlace {
-			defer os.RemoveAll(filepath.Dir(res.OutputFileName))
-		}
-	}
-
-	if !o.SkipValidate {
-		if err := validateDevEnvSQL(sqlValidationInput{
-			Path: resolved,
-			// Node: `${ this.slug }.${ lando.config.domain }` (ts:95).
-			ExpectedDomain:   slug + "." + devEnvDomain(slug),
-			IsMyDumper:       isMyDumper,
-			HasSearchReplace: len(o.SearchReplace) > 0,
-			Quiet:            o.Quiet,
-		}, out); err != nil {
-			return err
-		}
-	}
-
-	if isMyDumper {
-		if err := importMyDumperDump(ctx, r, slug, resolved, details.SourceDB, o); err != nil {
-			return err
-		}
-	} else if err := importMysqldump(ctx, r, slug, resolved); err != nil {
-		return err
-	}
-
-	if !o.Quiet {
-		fmt.Fprintln(out, "Success: Database imported.")
-	}
-
-	// Node's run() does not end at the import: it flushes the cache, reindexes,
-	// recreates the `vipgo` admin user and runs the VIP data cleanup
-	// (dev-env-import-sql.ts:128-142). Skipping them locks the user out of
-	// their own local wp-admin, because the imported dump replaced the local
-	// users table with the source environment's.
-	return postImportSteps(ctx, r, slug, postImportOptions{
-		Quiet:       o.Quiet,
-		SkipReindex: o.SkipReindex,
-	}, out)
-}
-
-// importMysqldump handles a plain mysqldump: `docker cp` the (already
-// search-replaced) file into the php container, then `wp db import`.
-func importMysqldump(ctx context.Context, r importRunner, slug, src string) error {
-	cid, err := containerID(ctx, r, slug, phpService)
-	if err != nil {
-		return err
-	}
-	dest := "/tmp/" + filepath.Base(src)
-	if err := r.Docker(ctx, importCopyArgs(src, cid, dest)...); err != nil {
-		return err
-	}
-	// Run the import via the compose runner (tees output to terminal + log).
-	return r.Compose(ctx, slug, importSQLArgs(dest)...)
-}
-
-// importMyDumperDump handles a MyDumper-format dump: stream the dump into
-// myloader (it must NOT be file-level search-replaced — that changes content
-// lengths and invalidates the per-file byte markers myloader uses to delimit
-// the --stream), then search-replace the live DB with wp-cli afterward.
-//
-// The dump is decompressed upstream in ImportSQL before it gets here. That step
-// is mandatory: a gzip-compressed stream piped into `myloader --stream` is read
-// as zero files, after which the loader threads block on work that never
-// arrives and the import hangs (myloader prints "Intermediate thread: SHUTDOWN"
-// and nothing more). Verified end-to-end against a real VIP MyDumper backup on
-// container myloader 0.21.3 — so this is the streaming bug, not the container.
-func importMyDumperDump(ctx context.Context, r importRunner, slug, file, sourceDB string, o ImportOptions) error {
-	if err := importMyDumper(ctx, r, slug, file, sourceDB, o.Quiet); err != nil {
-		return err
-	}
-	return wpSearchReplace(ctx, r, slug, o.SearchReplace, o.Quiet)
-}
-
-// wpSearchReplace runs `wp search-replace <from> <to> --all-tables` for each
-// "from,to" pair on the live DB (used after a MyDumper import, where the dump
-// can't be file-level rewritten). wp-cli handles serialized PHP data correctly.
-func wpSearchReplace(ctx context.Context, r importRunner, slug string, pairs []string, quiet bool) error {
-	for _, p := range pairs {
-		from, to, ok := strings.Cut(p, ",")
-		if !ok || from == "" {
-			continue
-		}
-		args := []string{"exec", "-T", phpService, "wp", "--allow-root", "search-replace", from, to, "--all-tables", "--skip-columns=guid"}
-		if quiet {
-			args = append(args, "--quiet")
-		}
-		if err := r.Compose(ctx, slug, args...); err != nil {
-			return err
-		}
-	}
-	return nil
-}
-
-// importMyDumper streams a MyDumper dump file into `myloader --stream`.
-func importMyDumper(ctx context.Context, r importRunner, slug, file, sourceDB string, quiet bool) error {
-	f, err := os.Open(file) // #nosec G304 -- CLI/exported dump path
-	if err != nil {
-		return err
-	}
-	defer f.Close()
-	return r.ComposeStdin(ctx, slug, f, myDumperImportArgs(sourceDB, quiet, myDumperThreads())...)
-}
-
-// dumpCompression peeks the first bytes of path for a gzip/zip magic number,
-// mirroring Node's detectCompressedMimeType (client-file-uploader.ts:565):
-// 1f8b → "gzip", 504b0304 → "zip", anything else → "" (uncompressed). Detection
-// is by content, not extension, so a misnamed .gz still imports.
-func dumpCompression(path string) (string, error) {
-	f, err := os.Open(path) // #nosec G304 -- CLI/exported dump path
-	if err != nil {
-		return "", err
-	}
-	defer f.Close()
-
-	hdr := make([]byte, 4)
-	n, err := io.ReadFull(f, hdr)
-	if err != nil && !errors.Is(err, io.EOF) && !errors.Is(err, io.ErrUnexpectedEOF) {
-		return "", err
-	}
-	hdr = hdr[:n]
-	switch {
-	case len(hdr) >= 2 && hdr[0] == 0x1f && hdr[1] == 0x8b:
-		return "gzip", nil
-	case len(hdr) >= 4 && hdr[0] == 0x50 && hdr[1] == 0x4b && hdr[2] == 0x03 && hdr[3] == 0x04:
-		return "zip", nil
-	}
-	return "", nil
-}
-
-// decompressDumpToTemp gunzips src into a fresh temp "sql-import.sql" file and
-// returns its path plus a cleanup func (Node extracts to a makeTempDir() path,
-// dev-env-import-sql.ts:54-68). The caller defers cleanup.
-func decompressDumpToTemp(src string) (path string, cleanup func(), err error) {
-	in, err := os.Open(src) // #nosec G304 -- CLI/exported dump path
-	if err != nil {
-		return "", nil, err
-	}
-	defer in.Close()
-
-	zr, err := gzip.NewReader(in)
-	if err != nil {
-		return "", nil, fmt.Errorf("Error extracting the SQL file: %s", err.Error())
-	}
-	defer zr.Close()
-
-	dir, err := os.MkdirTemp("", "vip-import-")
-	if err != nil {
-		return "", nil, err
-	}
-	cleanup = func() { _ = os.RemoveAll(dir) }
-
-	out := filepath.Join(dir, "sql-import.sql")
-	f, err := os.Create(out) // #nosec G304 -- temp dir we just created
-	if err != nil {
-		cleanup()
-		return "", nil, err
-	}
-	// #nosec G110 -- trusted exported/VIP-backup dump, not attacker input.
-	if _, err := io.Copy(f, zr); err != nil {
-		_ = f.Close()
-		cleanup()
-		return "", nil, fmt.Errorf("Error extracting the SQL file: %s", err.Error())
-	}
-	if err := f.Close(); err != nil {
-		cleanup()
-		return "", nil, err
-	}
-	return out, cleanup, nil
-}
-
-// ImportMedia copies a local media directory's contents into the env uploads.
-func ImportMedia(ctx context.Context, slug, srcDir string) error {
-	debuglog.Printf(ctx, debugNamespace, "Will import media into environment %q", slug)
-	r, err := newRunner(ctx)
-	if err != nil {
-		return err
-	}
-	cid, err := containerID(ctx, r, slug, phpService)
-	if err != nil {
-		return err
-	}
-	return r.Docker(ctx, importMediaCopyArgs(srcDir, cid)...)
-}

package/internal/devenv/importdata_test.go

@@ -1,142 +0,0 @@
-package devenv
-
-import (
-	"context"
-	"errors"
-	"os"
-	"path/filepath"
-	"strings"
-	"testing"
-
-	"github.com/Automattic/vip/internal/appctx"
-)
-
-// Parity blocker B2. Node's dev-env import sql reaches searchAndReplace through
-// resolveImportPath (dev-environment-core.ts:854) WITHOUT batchMode, so the
-// "This operation is not reversible" confirm fires — unlike the platform
-// `vip import sql` path, which passes batchMode:true (vip-import-sql.js:732)
-// because it has already confirmed. vip-next rewrote the user's dump with no
-// prompt on either dev-env path.
-//
-// The test process has no TTY, so the gate must refuse before anything is
-// rewritten — and before Docker is contacted, which is also why this test can
-// run without a container.
-func TestImportSQLInPlaceRequiresConfirmation(t *testing.T) {
-	src := filepath.Join(t.TempDir(), "dump.sql")
-	const original = "-- MySQL dump\nCREATE TABLE a;\n"
-	if err := os.WriteFile(src, []byte(original), 0o644); err != nil { // #nosec G306
-		t.Fatal(err)
-	}
-
-	err := ImportSQL(context.Background(), "e", src, ImportOptions{
-		SearchReplace: []string{"from,to"},
-		InPlace:       true,
-	})
-	if !errors.Is(err, appctx.ErrNonInteractive) {
-		t.Errorf("err = %v; want appctx.ErrNonInteractive (the in-place confirm must gate the rewrite)", err)
-	}
-	got, readErr := os.ReadFile(src) // #nosec G304
-	if readErr != nil {
-		t.Fatal(readErr)
-	}
-	if string(got) != original {
-		t.Errorf("dump was rewritten without confirmation:\n got %q\nwant %q", got, original)
-	}
-}
-
-// BatchMode is Node's own pre-confirm (search-and-replace.ts:151 gates on
-// `inPlace && ! batchMode`). `dev-env sync sql` sets it because the file is a
-// temp export, not anything the user named — Node never even reaches this
-// prompt from sync, since runImport passes no searchReplace at all
-// (dev-env-sync-sql.ts:333-338).
-//
-// Without this, sync asks a meaningless question interactively and in CI fails
-// with ErrNonInteractive *after* the whole production export has been paid for.
-func TestImportSQLBatchModeSkipsInPlaceConfirmation(t *testing.T) {
-	src := filepath.Join(t.TempDir(), "dump.sql")
-	if err := os.WriteFile(src, []byte("-- MySQL dump\nCREATE TABLE a;\n"), 0o644); err != nil { // #nosec G306
-		t.Fatal(err)
-	}
-
-	err := ImportSQL(context.Background(), "e", src, ImportOptions{
-		SearchReplace: []string{"from,to"},
-		InPlace:       true,
-		SkipValidate:  true,
-		BatchMode:     true,
-		Confirm: func(string, bool) (bool, error) {
-			t.Error("BatchMode must pre-confirm; the prompt fired anyway")
-			return false, nil
-		},
-	})
-	// It must get PAST the confirm. It then fails for an unrelated reason
-	// (no Docker in a unit test), which is the point: not ErrNonInteractive.
-	if errors.Is(err, appctx.ErrNonInteractive) {
-		t.Errorf("err = %v; BatchMode must not reach the interactive gate", err)
-	}
-}
-
-// Without --in-place nothing irreversible happens, so there must be no prompt:
-// the run proceeds (and then fails for an unrelated, non-confirmation reason).
-func TestImportSQLWithoutInPlaceDoesNotConfirm(t *testing.T) {
-	src := filepath.Join(t.TempDir(), "dump.sql")
-	if err := os.WriteFile(src, []byte("-- MySQL dump\nCREATE TABLE a;\n"), 0o644); err != nil { // #nosec G306
-		t.Fatal(err)
-	}
-	err := ImportSQL(context.Background(), "e", src, ImportOptions{SearchReplace: []string{"from,to"}})
-	if errors.Is(err, appctx.ErrNonInteractive) {
-		t.Error("no --in-place: Node does not prompt here, so vip-next must not either")
-	}
-}
-
-func TestImportSQLArgs(t *testing.T) {
-	// --allow-root: the php container runs as root, so wp-cli refuses without it.
-	got := importSQLArgs("/tmp/in/file.sql")
-	want := []string{"exec", "-T", "php", "wp", "--allow-root", "db", "import", "/tmp/in/file.sql"}
-	assertArgv(t, got, want)
-}
-
-func TestMyDumperImportArgs(t *testing.T) {
-	// db-myloader is a Lando tooling alias for the myloader binary (run in the
-	// php service), NOT a wp-cli command.
-	got := myDumperImportArgs("wordpress", false, 4)
-	want := []string{
-		"exec", "-T", "php",
-		"myloader", "-h", "database", "-u", "wordpress", "-p", "wordpress", "--database", "wordpress",
-		"--drop-table", "--source-db=wordpress", "--threads=4",
-		"--max-threads-for-schema-creation=10", "--max-threads-for-index-creation=10",
-		"--skip-triggers", "--skip-post", "--optimize-keys", "--checksum=SKIP",
-		"--metadata-refresh-interval=2000000", "--stream", "--verbose=3",
-	}
-	assertArgv(t, got, want)
-}
-
-func TestMyDumperImportArgsNoSourceDBQuiet(t *testing.T) {
-	got := myDumperImportArgs("", true, 1)
-	joined := strings.Join(got, " ")
-	if strings.Contains(joined, "--source-db") {
-		t.Fatalf("empty source db must omit --source-db: %v", got)
-	}
-	if !strings.Contains(joined, "--threads=1") || !strings.Contains(joined, "--verbose=0") {
-		t.Fatalf("quiet/threads not applied: %v", got)
-	}
-}
-
-func TestImportSQLCopyArgs(t *testing.T) {
-	got := importCopyArgs("/host/file.sql", "containerid", "/tmp/file.sql")
-	want := []string{"cp", "/host/file.sql", "containerid:/tmp/file.sql"}
-	assertArgv(t, got, want)
-}
-
-func TestImportMediaCopyArgs(t *testing.T) {
-	// Trailing /. copies the directory CONTENTS into uploads (not a nested dir).
-	got := importMediaCopyArgs("/host/uploads", "cid")
-	want := []string{"cp", "/host/uploads/.", "cid:/wp/wp-content/uploads"}
-	assertArgv(t, got, want)
-}
-
-func TestSearchReplacePairsFromFlag(t *testing.T) {
-	got := searchReplacePairs([]string{"old.com,new.test", "a,b"})
-	if len(got) != 2 || got[0] != "old.com,new.test" {
-		t.Fatalf("pairs = %v", got)
-	}
-}