@alteriom/painlessmesh 1.7.4 → 1.7.6

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example20_StatusRequest_LTS_WDT_Timeout_Object/Scheduler_example20_StatusRequest_LTS_WDT_Timeout_Object.ino

@@ -1,185 +0,0 @@
-/**
-    This is example 5 rewritten with Timeout, LTS, WDT functioanlity + multitab and extra classes
-    - 1 second timeout is set for the main calculation task
-    - LTS is used to address task-specific sensor class object
-    - WDT is used to set the Task ID and use that for identifying the tasks (debug)
-
-    Original description:
-    ====================
-      This test emulates querying 1 to 10 sensors once every 10 seconds, each could respond with a different delay
-      (ultrasonic sensors for instance) and printing a max value of them when all have reported their values.
-      The overall timeout of 1 second is setup as well.
-      An error message needs to be printed if a timeout occurred instead of a distance value.
-
-      Task and SuperSensor objects are dynamically created and destroyed as needed every 10 seconds
-*/
-
-// #define _TASK_TIMECRITICAL      // Enable monitoring scheduling overruns
-#define _TASK_SLEEP_ON_IDLE_RUN // Enable 1 ms SLEEP_IDLE powerdowns between tasks if no callback methods were invoked during the pass 
-#define _TASK_STATUS_REQUEST    // Compile with support for StatusRequest functionality - triggering tasks on status change events in addition to time only
-#define _TASK_WDT_IDS           // Compile with support for wdt control points and task ids
-#define _TASK_LTS_POINTER       // Compile with support for local task storage pointer
-#define _TASK_PRIORITY          // Support for layered scheduling priority
-// #define _TASK_MICRO_RES         // Support for microsecond resolution
-// #define _TASK_STD_FUNCTION      // Support for std::function (ESP8266 and ESP32 ONLY)
-#define _TASK_DEBUG             // Make all methods and variables public for debug purposes
-#define _TASK_INLINE       // Make all methods "inline" - needed to support some multi-tab, multi-file implementations
-#define _TASK_TIMEOUT           // Support for overall task timeout 
-
-#include <TaskScheduler.h>
-#include "SuperSensor.h"
-
-StatusRequest measure;
-
-Scheduler ts, hts;
-
-// Callback methods prototypes
-void CycleCallback();
-void CalcCallback();
-bool CalcEnable();
-void CalcDisable();
-void SCallback();
-bool SEnable();
-void SDisable();
-
-// Tasks
-
-Task tCycle(10000, TASK_FOREVER, &CycleCallback, &hts);
-Task tCalculate(TASK_IMMEDIATE , TASK_ONCE, &CalcCallback, &hts, false, &CalcEnable, &CalcDisable);
-
-int numberSensors;
-long distance;
-int pins[] = { 1, 9, 3, 7, 5, 6, 4, 8, 2, 10 };
-
-void CycleCallback() {
-  Serial.println();Serial.println();Serial.println();
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.println("CycleCallback: Initiating measurement cycle every 10 seconds");
-  Serial.print("Number of sensors=");
-  
-  numberSensors = random(1, 11); // 1 to 10 sensors, randomly
-  distance = 0;
-  Serial.println(numberSensors);
-
-  measure.setWaiting(numberSensors); // Set the StatusRequest to wait for 3 signals.
-  tCalculate.waitFor(&measure);
-  tCalculate.setTimeout(1000 * TASK_MILLISECOND);
-}
-
-bool CalcEnable() {
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.println("CalcEnable: OnEnable");
-  Serial.println("Activating sensors");
-
-
-  for (int i = 0; i < numberSensors; i++) {
-    Task *t = new Task(TASK_MILLISECOND, TASK_FOREVER, &SCallback, &ts, false, &SEnable, &SDisable);
-    SuperSensor *s = new SuperSensor( pins[i] );
-    t->setLtsPointer( (void*) s);
-    t->setId(i + 1);
-
-    s->begin();
-
-    t->restartDelayed();
-  }
-
-  return true;
-}
-
-void CalcDisable() {
-  if (tCalculate.timedOut()) {
-    measure.signalComplete(-1);  // signal error
-    Serial.print(millis()); Serial.print(":\t");
-    Serial.println("MeasureCallback: ***** Timeout *****");
-  }
-  ts.disableAll(false); // only disable tasks in the ts scheduler
-}
-
-
-void CalcCallback() {
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.println("CalcCallback: calculating");
-  if ( measure.getStatus() >= 0) {  // only calculate if statusrequest ended successfully
-    Serial.print("CalcCallback: Max distance="); Serial.println(distance);
-    Serial.println();
-  }
-}
-
-
-/** Simulation code for all sensors
-    -------------------------------
-*/
-bool SEnable() {
-  Task &t = ts.currentTask();
-  int i = t.getId();
-
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.print("SEnable: TaskID=");
-  Serial.println(i);
-  Serial.print("Triggering sensor. Delay=");
-
-
-  // Another way to update the distances with one codebase - use LTS pointers
-  SuperSensor *s = (SuperSensor*) t.getLtsPointer();
-
-  long dly = s->trigger();
-
-
-  Serial.println( dly );
-  return true;
-}
-
-void SCallback() {
-  Task &t = ts.currentTask();
-
-  SuperSensor *s = (SuperSensor*) t.getLtsPointer();
-  if ( s->measurementReady() ) {
-    int i = t.getId();
-    Serial.print(millis()); Serial.print(":\t");
-    Serial.print("SCallback: TaskID=");
-    Serial.println(i);
-    Serial.print("Emulating measurement. d=");
-
-    long d = s->value();
-    if ( d > distance ) distance = d;
-
-    Serial.println(d);
-
-    measure.signal();
-    t.disable();
-  }
-}
-
-void SDisable() {
-  Task &t = ts.currentTask();
-  int i = t.getId();
-
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.print("SDisable: TaskID=");
-  Serial.println(i);
-
-  SuperSensor *s = (SuperSensor*) ts.currentLts();
-  s->stop();
-
-  delete s;
-  delete &t;
-}
-
-/** Main Arduino code
-  Not much is left here - everything is taken care of by the framework
-*/
-void setup() {
-
-  Serial.begin(115200);
-  Serial.println("TaskScheduler StatusRequest Sensor Emulation Test. Complex Test.");
-  randomSeed(analogRead(A0) + millis());
-
-  ts.setHighPriorityScheduler(&hts);
-
-  tCalculate.setTimeout(1 * TASK_SECOND);
-  tCycle.enable();
-}
-
-void loop() {
-  ts.execute();
-}

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example20_StatusRequest_LTS_WDT_Timeout_Object/SuperSensor.cpp

@@ -1,36 +0,0 @@
-#include "SuperSensor.h"
-
-SuperSensor::SuperSensor(int aPin) {
-  iPin = aPin;
-}
-
-SuperSensor::~SuperSensor() {
-  iValue = -1;
-}
-
-void SuperSensor::begin() {
-  iDelay = random(300, 1500);
-  iValue = -1;
-}
-
-void SuperSensor::stop() {
-  //nothing to do
-}
-
-long SuperSensor::trigger() {
-  iStart = millis();
-  return iDelay;
-}
-
-bool SuperSensor::measurementReady() {
-  if ( millis() - iStart > iDelay ) {
-    iValue = random(501);
-    return true;
-  }
-  return false;
-}
-
-long SuperSensor::value() {
-  return iValue;
-}
-

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example20_StatusRequest_LTS_WDT_Timeout_Object/SuperSensor.h

@@ -1,25 +0,0 @@
-#ifndef _SUPER_SENSOR_H
-#define _SUPER_SENSOR_H
-
-
-#include "Arduino.h"
-#include <TaskSchedulerDeclarations.h>
-
-class SuperSensor {
-  public:
-    SuperSensor(int aPin);
-    ~SuperSensor();
-    void begin();
-    void stop();
-    long trigger();
-    bool measurementReady();
-    long value();
-
-  private: 
-    long  iDelay;
-    long  iValue;
-    int   iPin;
-    unsigned long iStart;
-};
-
-#endif // _SUPER_SENSOR_H

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/Calculator.cpp

@@ -1,66 +0,0 @@
-#include "Calculator.h"
-#include "SuperSensor.h"
-
-#if defined (ARDUINO_ARCH_AVR)
-#include <MemoryFree.h>
-#endif
-
-#if defined(__arm__)
-extern "C" char* sbrk(int incr);
-static int freeMemory() {
-  char top = 't';
-  return &top - reinterpret_cast<char*>(sbrk(0));
-}
-
-#endif
-Calculator::Calculator( Scheduler* aS, Scheduler* aSensors) : Task(aS) {
-  iS = aSensors;
-  setTimeout(1000 * TASK_MILLISECOND);
-}
-
-bool Calculator::Callback() {
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.println("CalcCallback: calculating");
-  if ( getStatusRequest()->getStatus() >= 0) {  // only calculate if statusrequest ended successfully
-    Serial.print("CalcCallback: Max distance="); Serial.println(distance);
-  }
-  return false;
-}
-
-extern int pins[];
-
-bool Calculator::OnEnable() {
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.println("CalcEnable: OnEnable");
-  Serial.println("Activating sensors");
-
-  StatusRequest* sr = getStatusRequest();
-  iNS = sr->getCount();
-
-  distance = 0;
-  for (int i = 0; i < iNS; i++) {
-    SuperSensor *s = new SuperSensor( iS, pins[i], this, sr);
-    s->setId(i + 1);
-    s->begin();
-    s->restartDelayed();
-  }
-
-  return true;
-}
-
-void Calculator::OnDisable() {
-  if ( timedOut() ) {
-    getStatusRequest()->signalComplete(-1);  // signal error
-    Serial.print(millis()); Serial.print(":\t");
-    Serial.println("MeasureCallback: ***** Timeout *****");
-  }
-  iS->disableAll(false); // only disable tasks in the ts scheduler
-#if defined (ARDUINO_ARCH_AVR) || defined(__arm__)
-  Serial.print("Free mem = "); Serial.println(freeMemory()); Serial.println();
-#endif
-}
-
-void Calculator::reportDistance(long aD) {
-  if (distance < aD) distance = aD;
-}
-

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/Calculator.h

@@ -1,34 +0,0 @@
-#ifndef _CALCULATOR_H
-#define _CALCULATOR_H
-
-#include "Arduino.h"
-
-#define _TASK_SLEEP_ON_IDLE_RUN // Enable 1 ms SLEEP_IDLE powerdowns between tasks if no callback methods were invoked during the pass 
-#define _TASK_STATUS_REQUEST    // Compile with support for StatusRequest functionality - triggering tasks on status change events in addition to time only
-#define _TASK_WDT_IDS           // Compile with support for wdt control points and task ids
-#define _TASK_PRIORITY          // Support for layered scheduling priority
-#define _TASK_TIMEOUT           // Support for overall task timeout 
-#define _TASK_OO_CALLBACKS      // Support for dynamic callback method binding
-
-#include <TaskSchedulerDeclarations.h>
-
-class Calculator : public Task {
-  public:
-    Calculator( Scheduler* aS, Scheduler* aSensors);
-
-    void reportDistance(long aD);
-
-    bool Callback();
-    bool OnEnable();
-    void OnDisable();
-
-  private:
-    Scheduler*  iS;
-
-    long distance;
-    int iNS;
-
-};
-
-#endif // _CALCULATOR_H
-

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/Scheduler_example21_OO_Callbacks.ino

@@ -1,76 +0,0 @@
-/**
-    This is example 5 rewritten with dynamic binding of callback methods
-    - 1 second timeout is set for the main calculation task
-    - LTS is used to address task-specific sensor class object
-    - WDT is used to set the Task ID and use that for identifying the tasks (debug)
-
-    Original description:
-    ====================
-      This test emulates querying 1 to 10 sensors once every 10 seconds, each could respond with a different delay
-      (ultrasonic sensors for instance) and printing a max value of them when all have reported their values.
-      The overall timeout of 1 second is setup as well.
-      An error message needs to be printed if a timeout occurred instead of a distance value.
-
-      Task and SuperSensor objects are dynamically created and destroyed as needed every 10 seconds
-
-       This sketch uses a FreeMemory library: https://github.com/McNeight/MemoryFree
-	   FreeMemory for ARM32 boards is based on: http://www.stm32duino.com/viewtopic.php?f=18&t=2065
-*/
-
-
-#define _TASK_SLEEP_ON_IDLE_RUN // Enable 1 ms SLEEP_IDLE powerdowns between tasks if no callback methods were invoked during the pass 
-#define _TASK_STATUS_REQUEST    // Compile with support for StatusRequest functionality - triggering tasks on status change events in addition to time only
-#define _TASK_WDT_IDS           // Compile with support for wdt control points and task ids
-#define _TASK_PRIORITY          // Support for layered scheduling priority
-#define _TASK_TIMEOUT           // Support for overall task timeout 
-#define _TASK_OO_CALLBACKS
-
-#include <TaskScheduler.h>
-
-#include "SuperSensor.h"
-#include "Calculator.h"
-#include "Ticker.h"
-
-StatusRequest measure;
-
-Scheduler ts, hts;
-
-// Tasks
-
-Calculator* tCalculate;
-Ticker*     tCycle;
-
-int pins[] = { 1, 9, 3, 7, 5, 6, 4, 8, 2, 10 };
-
-#ifdef ARDUINO_ARCH_STM32F1
-#define A0	3
-#endif
-
-/** Main Arduino code
-  Not much is left here - everything is taken care of by the framework
-*/
-void setup() {
-
-  Serial.begin(115200);
-  delay(1000);
-  while (!Serial) {} 
-  Serial.println("TaskScheduler StatusRequest Sensor Emulation Test. Complex Test.");
-  
-#ifdef ARDUINO_ARCH_STM32F1
-  pinMode(A0, INPUT_ANALOG);
-#endif
-
-  randomSeed(analogRead(A0) + millis());
-
-  ts.setHighPriorityScheduler(&hts);
-
-  tCalculate = new Calculator (&hts, &ts);
-  tCycle     = new Ticker (&hts, (Task*) tCalculate, &measure);
-
-  tCalculate->setTimeout(1 * TASK_SECOND);
-  tCycle->enable();
-}
-
-void loop() {
-  ts.execute();
-}

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/SuperSensor.cpp

@@ -1,83 +0,0 @@
-#include "SuperSensor.h"
-
-SuperSensor::SuperSensor(Scheduler* aScheduler, int aPin, Calculator* aC, StatusRequest* aS) :   Task(TASK_MILLISECOND, TASK_FOREVER, aScheduler, false) {
-  iPin = aPin;
-  iC = aC;
-  iS = aS;
-}
-
-SuperSensor::~SuperSensor() {
-  iValue = -1;
-}
-
-void SuperSensor::begin() {
-  iDelay = random(300, 1500);
-  iValue = -1;
-}
-
-void SuperSensor::stop() {
-  //nothing to do
-}
-
-long SuperSensor::trigger() {
-  iStart = millis();
-  return iDelay;
-}
-
-bool SuperSensor::measurementReady() {
-  if ( millis() - iStart > iDelay ) {
-    iValue = random(501);
-    return true;
-  }
-  return false;
-}
-
-long SuperSensor::value() {
-  return iValue;
-}
-
-bool SuperSensor::OnEnable() {
-  int i = getId();
-
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.print("SEnable: TaskID=");
-  Serial.println(i);
-  Serial.print("Triggering sensor. Delay=");
-
-  long dly = trigger();
-
-  Serial.println( dly );
-  return true;
-}
-
-bool SuperSensor::Callback() {
-
-  if ( measurementReady() ) {
-    int i = getId();
-    Serial.print(millis()); Serial.print(":\t");
-    Serial.print("SCallback: TaskID=");
-    Serial.println(i);
-    Serial.print("Emulating measurement. d=");
-
-    long d = value();
-    iC->reportDistance(d);
-
-    Serial.println(d);
-
-    iS->signal();
-    disable();
-	delete this;
-    return true;
-  }
-  return false;
-}
-
-void SuperSensor::OnDisable() {
-  int i = getId();
-
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.print("SDisable: TaskID=");
-  Serial.println(i);
-
-  stop();
-}

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/SuperSensor.h

@@ -1,44 +0,0 @@
-#ifndef _SUPER_SENSOR_H
-#define _SUPER_SENSOR_H
-
-
-#include "Arduino.h"
-
-#define _TASK_SLEEP_ON_IDLE_RUN // Enable 1 ms SLEEP_IDLE powerdowns between tasks if no callback methods were invoked during the pass 
-#define _TASK_STATUS_REQUEST    // Compile with support for StatusRequest functionality - triggering tasks on status change events in addition to time only
-#define _TASK_WDT_IDS           // Compile with support for wdt control points and task ids
-#define _TASK_PRIORITY          // Support for layered scheduling priority
-#define _TASK_TIMEOUT           // Support for overall task timeout 
-#define _TASK_OO_CALLBACKS
-
-#include <TaskSchedulerDeclarations.h>
-#include "Calculator.h"
-
-//class Calculator;
-
-class SuperSensor : public Task {
-
-  public:
-    SuperSensor(Scheduler* aScheduler, int aPin, Calculator* aC, StatusRequest* aS);
-    ~SuperSensor();
-
-    void begin();
-    void stop();
-    long trigger();
-    bool measurementReady();
-    long value();
-
-    bool Callback();
-    bool OnEnable();
-    void OnDisable();
-
-  private:
-    long  iDelay;
-    long  iValue;
-    int   iPin;
-    unsigned long iStart;
-    Calculator* iC;
-    StatusRequest* iS;
-};
-
-#endif // _SUPER_SENSOR_H

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/Ticker.cpp

@@ -1,21 +0,0 @@
-#include "Ticker.h"
-
-Ticker::Ticker(Scheduler* aS, Task* aCalc, StatusRequest* aM) : Task(10000, TASK_FOREVER, aS, false) {
-  iCalc = aCalc;
-  iMeasure = aM;
-}
-
-bool Ticker::Callback() {
-  Serial.println(); Serial.println(); Serial.println();
-  Serial.print(millis()); Serial.print(":\t");
-  Serial.println("CycleCallback: Initiating measurement cycle every 10 seconds");
-
-  int numberSensors = random(1, 11); // 1 to 10 sensors, randomly
-  Serial.print("Number of sensors=");
-  Serial.println(numberSensors);
-
-  iMeasure->setWaiting(numberSensors); // Set the StatusRequest to wait for 1 to 10 signals.
-  iCalc->waitFor(iMeasure);
-  return true;
-}
-

package/examples/meshCommandNode/.pio/libdeps/esp32/TaskScheduler/examples/Scheduler_example21_OO_Callbacks/Ticker.h

@@ -1,28 +0,0 @@
-#ifndef _TICKER_H
-#define _TICKER_H
-
-#include "Arduino.h"
-
-#define _TASK_SLEEP_ON_IDLE_RUN // Enable 1 ms SLEEP_IDLE powerdowns between tasks if no callback methods were invoked during the pass 
-#define _TASK_STATUS_REQUEST    // Compile with support for StatusRequest functionality - triggering tasks on status change events in addition to time only
-#define _TASK_WDT_IDS           // Compile with support for wdt control points and task ids
-#define _TASK_PRIORITY          // Support for layered scheduling priority
-#define _TASK_TIMEOUT           // Support for overall task timeout 
-#define _TASK_OO_CALLBACKS
-
-#include <TaskSchedulerDeclarations.h>
-
-class Ticker : public Task {
-  public:
-    Ticker(Scheduler* aS, Task* aCalc, StatusRequest* aM);
-    ~Ticker() {};
-
-    bool Callback();
-
-  private:
-    Task  *iCalc;
-    StatusRequest* iMeasure;
-};
-
-
-#endif