@alteriom/painlessmesh 1.7.4 → 1.7.6

package/docs/alteriom/overview.md

@@ -1,508 +1,508 @@
-# Alteriom Extensions Overview
-
-The Alteriom extensions provide production-ready, type-safe packages for common IoT scenarios. These extensions demonstrate best practices for the painlessMesh plugin system while providing immediately useful functionality for sensor networks, device control, and system monitoring.
-
-## What are Alteriom Extensions?
-
-Alteriom extensions are pre-built painlessMesh packages that handle common IoT communication patterns:
-
-- **Environmental Monitoring**: Temperature, humidity, pressure sensors
-- **Device Control**: Commands for actuators, displays, relays  
-- **Health Monitoring**: Device status, diagnostics, and telemetry
-- **Type Safety**: Compile-time validation and automatic serialization
-- **Production Ready**: Tested, documented, and optimized implementations
-
-## Package Types
-
-### SensorPackage (Type 200)
-For broadcasting environmental sensor data across the mesh.
-
-```cpp
-alteriom::SensorPackage sensor;
-sensor.temperature = 23.5;
-sensor.humidity = 65.0;
-sensor.pressure = 1013.25;
-sensor.sensorId = 1001;
-sensor.timestamp = mesh.getNodeTime();
-sensor.batteryLevel = 85;
-
-mesh.sendPackage(&sensor);
-```
-
-**Use Cases:**
-- Weather stations
-- Environmental monitoring
-- HVAC system feedback
-- Greenhouse automation
-- Industrial sensor networks
-
-### CommandPackage (Type 201)
-For sending control commands to specific devices.
-
-```cpp
-alteriom::CommandPackage cmd;
-cmd.dest = targetNodeId;
-cmd.command = 1; // LED_CONTROL
-cmd.targetDevice = 100; // LED strip ID
-cmd.parameters = "{\"brightness\":75,\"color\":\"blue\"}";
-cmd.commandId = generateCommandId();
-
-mesh.sendPackage(&cmd);
-```
-
-**Use Cases:**
-- Remote device control
-- Actuator management
-- Display updates
-- System configuration
-- Automation triggers
-
-### StatusPackage (Type 202)
-For broadcasting device health and operational status.
-
-```cpp
-alteriom::StatusPackage status;
-status.deviceStatus = 1; // OPERATIONAL
-status.uptime = millis() / 1000;
-status.freeMemory = ESP.getFreeHeap();
-status.wifiStrength = WiFi.RSSI();
-status.firmwareVersion = "1.2.3";
-
-mesh.sendPackage(&status);
-```
-
-**Use Cases:**
-- System monitoring
-- Predictive maintenance
-- Network diagnostics
-- Performance tracking
-- Remote troubleshooting
-
-## Key Features
-
-### Type Safety
-Compile-time validation prevents common messaging errors:
-
-```cpp
-// Compile error if field types don't match
-sensor.temperature = "invalid"; // ❌ Compiler error
-sensor.temperature = 25.0;      // ✅ Correct
-
-// IDE autocomplete for all fields
-sensor.| // IDE shows: temperature, humidity, pressure, etc.
-```
-
-### Automatic Serialization
-No manual JSON handling required:
-
-```cpp
-// Automatic serialization to JSON
-mesh.sendPackage(&sensor);
-
-// Automatic deserialization from JSON
-mesh.onPackage(200, [](protocol::Variant& variant) {
-    alteriom::SensorPackage received = variant.to<alteriom::SensorPackage>();
-    // All fields automatically populated
-});
-```
-
-### Cross-Platform Compatibility
-Works on ESP32, ESP8266, and desktop platforms:
-
-```cpp
-// TSTRING adapts to platform
-#ifdef ESP32
-    // Uses Arduino String class
-#else
-    // Uses std::string on desktop
-#endif
-```
-
-### Memory Optimization
-Efficient memory usage for resource-constrained devices:
-
-```cpp
-// Accurate buffer sizing
-size_t bufferSize = sensor.jsonObjectSize();
-
-// Minimal memory footprint
-// No unnecessary string copies or allocations
-```
-
-## Architecture Integration
-
-### Plugin System
-Alteriom packages integrate seamlessly with painlessMesh's plugin architecture:
-
-```
-Application Layer (Your Code)
-    ↓
-Alteriom Packages (SensorPackage, CommandPackage, StatusPackage)  
-    ↓
-painlessMesh Plugin System (SinglePackage, BroadcastPackage)
-    ↓
-painlessMesh Core (Mesh, Protocol, Network)
-```
-
-### Message Flow
-```
-Sensor Reading → SensorPackage → JSON → Mesh Network → JSON → SensorPackage → Handler
-```
-
-### Type ID Allocation
-Alteriom uses reserved type ID range 200-299:
-
-```cpp
-enum AlteriomTypes {
-    ALTERIOM_SENSOR = 200,    // SensorPackage
-    ALTERIOM_COMMAND = 201,   // CommandPackage  
-    ALTERIOM_STATUS = 202,    // StatusPackage
-    // 203-299 reserved for future Alteriom packages
-};
-```
-
-## Getting Started
-
-### 1. Include Alteriom Headers
-
-```cpp
-#include "painlessMesh.h"
-#include "examples/alteriom/alteriom_sensor_package.hpp"
-
-using namespace alteriom; // For convenience
-```
-
-### 2. Register Package Handlers
-
-```cpp
-void setup() {
-    mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-    
-    // Register handlers for Alteriom packages
-    mesh.onPackage(ALTERIOM_SENSOR, handleSensorData);
-    mesh.onPackage(ALTERIOM_COMMAND, handleCommand);
-    mesh.onPackage(ALTERIOM_STATUS, handleStatus);
-}
-```
-
-### 3. Implement Handlers
-
-```cpp
-void handleSensorData(protocol::Variant& variant) {
-    SensorPackage sensor = variant.to<SensorPackage>();
-    
-    Serial.printf("Sensor %u: T=%.1f°C, H=%.1f%%, P=%.1f hPa\n",
-                 sensor.sensorId, sensor.temperature, 
-                 sensor.humidity, sensor.pressure);
-    
-    // Process sensor data (store, analyze, forward, etc.)
-    if (sensor.temperature > 30.0) {
-        triggerCooling();
-    }
-}
-
-void handleCommand(protocol::Variant& variant) {
-    CommandPackage cmd = variant.to<CommandPackage>();
-    
-    if (cmd.dest != mesh.getNodeId()) {
-        return; // Not for this node
-    }
-    
-    Serial.printf("Command %u for device %u: %u\n",
-                 cmd.commandId, cmd.targetDevice, cmd.command);
-    
-    // Execute command
-    executeDeviceCommand(cmd);
-    
-    // Send acknowledgment
-    sendCommandAcknowledgment(cmd);
-}
-```
-
-### 4. Send Packages
-
-```cpp
-// Send sensor data every 30 seconds
-Task taskSensorData(30000, TASK_FOREVER, [](){
-    SensorPackage sensor;
-    sensor.from = mesh.getNodeId();
-    sensor.temperature = readTemperature();
-    sensor.humidity = readHumidity();
-    sensor.pressure = readPressure();
-    sensor.sensorId = SENSOR_ID;
-    sensor.timestamp = mesh.getNodeTime();
-    sensor.batteryLevel = readBatteryLevel();
-    
-    mesh.sendPackage(&sensor);
-});
-```
-
-## Advanced Usage
-
-### Custom Command Types
-
-Define application-specific command types:
-
-```cpp
-enum DeviceCommands {
-    LED_CONTROL = 1,
-    SERVO_POSITION = 2,
-    RELAY_SWITCH = 3,
-    DISPLAY_UPDATE = 4,
-    SENSOR_CALIBRATION = 5
-};
-
-void executeDeviceCommand(const CommandPackage& cmd) {
-    switch(cmd.command) {
-        case LED_CONTROL:
-            handleLEDCommand(cmd);
-            break;
-        case SERVO_POSITION:
-            handleServoCommand(cmd);
-            break;
-        // ... other commands
-    }
-}
-```
-
-### Command Parameters
-
-Use JSON parameters for complex commands:
-
-```cpp
-void handleLEDCommand(const CommandPackage& cmd) {
-    // Parse JSON parameters
-    DynamicJsonDocument doc(256);
-    deserializeJson(doc, cmd.parameters);
-    
-    int brightness = doc["brightness"];
-    String color = doc["color"];
-    int duration = doc["duration"];
-    
-    // Execute LED control
-    setLEDColor(color);
-    setLEDBrightness(brightness);
-    if (duration > 0) {
-        scheduleAutoOff(duration);
-    }
-}
-```
-
-### Status Monitoring
-
-Implement comprehensive device monitoring:
-
-```cpp
-void sendStatusUpdate() {
-    StatusPackage status;
-    status.from = mesh.getNodeId();
-    status.deviceStatus = getDeviceStatus();
-    status.uptime = millis() / 1000;
-    status.freeMemory = ESP.getFreeHeap();
-    status.wifiStrength = WiFi.RSSI();
-    status.firmwareVersion = FIRMWARE_VERSION;
-    
-    // Add custom diagnostics
-    if (ESP.getFreeHeap() < 10000) {
-        status.deviceStatus |= STATUS_LOW_MEMORY;
-    }
-    if (WiFi.RSSI() < -80) {
-        status.deviceStatus |= STATUS_WEAK_SIGNAL;
-    }
-    
-    mesh.sendPackage(&status);
-}
-```
-
-### Error Handling
-
-Implement robust error handling:
-
-```cpp
-void handleSensorData(protocol::Variant& variant) {
-    try {
-        SensorPackage sensor = variant.to<SensorPackage>();
-        
-        // Validate sensor data
-        if (!isValidSensorReading(sensor)) {
-            Serial.printf("Invalid sensor data from node %u\n", sensor.from);
-            return;
-        }
-        
-        // Check data age
-        uint32_t age = mesh.getNodeTime() - sensor.timestamp;
-        if (age > MAX_DATA_AGE) {
-            Serial.printf("Stale sensor data (age: %u µs)\n", age);
-            return;
-        }
-        
-        processSensorData(sensor);
-        
-    } catch (const std::exception& e) {
-        Serial.printf("Error processing sensor data: %s\n", e.what());
-    }
-}
-```
-
-## Integration Patterns
-
-### Sensor Network Pattern
-
-Central collector with multiple sensor nodes:
-
-```cpp
-class SensorCollector {
-private:
-    std::map<uint32_t, SensorData> sensorReadings;
-    
-public:
-    void setup() {
-        mesh.onPackage(ALTERIOM_SENSOR, [this](protocol::Variant& variant) {
-            SensorPackage sensor = variant.to<SensorPackage>();
-            storeSensorReading(sensor);
-            return false;
-        });
-    }
-    
-    void storeSensorReading(const SensorPackage& sensor) {
-        sensorReadings[sensor.from] = {
-            sensor.temperature,
-            sensor.humidity, 
-            sensor.pressure,
-            sensor.timestamp
-        };
-        
-        // Trigger analysis
-        analyzeEnvironmentalData();
-    }
-};
-```
-
-### Command and Control Pattern
-
-Central controller managing multiple devices:
-
-```cpp
-class DeviceController {
-private:
-    std::map<uint32_t, DeviceInfo> devices;
-    
-public:
-    void controlDevice(uint32_t nodeId, uint32_t deviceId, 
-                      uint8_t command, const String& parameters) {
-        CommandPackage cmd;
-        cmd.dest = nodeId;
-        cmd.command = command;
-        cmd.targetDevice = deviceId;
-        cmd.parameters = parameters;
-        cmd.commandId = generateCommandId();
-        
-        mesh.sendPackage(&cmd);
-        
-        // Track pending command
-        pendingCommands[cmd.commandId] = {nodeId, millis()};
-    }
-    
-    void handleCommandAck(const CommandPackage& ack) {
-        auto it = pendingCommands.find(ack.commandId);
-        if (it != pendingCommands.end()) {
-            Serial.printf("Command %u acknowledged by node %u\n", 
-                         ack.commandId, ack.from);
-            pendingCommands.erase(it);
-        }
-    }
-};
-```
-
-### Health Monitoring Pattern
-
-Network-wide device health monitoring:
-
-```cpp
-class HealthMonitor {
-private:
-    std::map<uint32_t, DeviceHealth> deviceHealth;
-    
-public:
-    void setup() {
-        mesh.onPackage(ALTERIOM_STATUS, [this](protocol::Variant& variant) {
-            StatusPackage status = variant.to<StatusPackage>();
-            updateDeviceHealth(status);
-            return false;
-        });
-        
-        // Check for unhealthy devices every minute
-        userScheduler.addTask(Task(60000, TASK_FOREVER, [this]() {
-            checkDeviceHealth();
-        }));
-    }
-    
-    void updateDeviceHealth(const StatusPackage& status) {
-        deviceHealth[status.from] = {
-            status.deviceStatus,
-            status.uptime,
-            status.freeMemory,
-            status.wifiStrength,
-            mesh.getNodeTime() // Last seen
-        };
-    }
-    
-    void checkDeviceHealth() {
-        uint32_t now = mesh.getNodeTime();
-        
-        for (auto& [nodeId, health] : deviceHealth) {
-            uint32_t timeSinceLastSeen = now - health.lastSeen;
-            
-            if (timeSinceLastSeen > DEVICE_TIMEOUT) {
-                Serial.printf("Device %u appears offline\n", nodeId);
-                triggerAlert(nodeId, "Device offline");
-            }
-            
-            if (health.freeMemory < LOW_MEMORY_THRESHOLD) {
-                Serial.printf("Device %u low memory: %u bytes\n", 
-                             nodeId, health.freeMemory);
-                triggerAlert(nodeId, "Low memory");
-            }
-        }
-    }
-};
-```
-
-## Best Practices
-
-### Performance Optimization
-
-1. **Batch sensor readings** when possible
-2. **Use appropriate message frequency** (don't spam the network)
-3. **Implement message filtering** to avoid processing irrelevant data
-4. **Monitor memory usage** especially on ESP8266
-
-### Reliability
-
-1. **Validate all received data** before processing
-2. **Implement timeouts** for commands and responses
-3. **Handle network partitions** gracefully
-4. **Add retry logic** for critical commands
-
-### Security
-
-1. **Validate message sources** in handlers
-2. **Sanitize command parameters** before execution
-3. **Implement rate limiting** for commands
-4. **Consider encryption** for sensitive data
-
-### Testing
-
-1. **Test with realistic network loads**
-2. **Simulate node failures** and recovery
-3. **Validate under memory pressure**
-4. **Test with maximum expected node count**
-
-## Next Steps
-
-- Learn about [Sensor Packages](sensor-packages.md) in detail
-- Explore [Command System](command-system.md) implementation
-- Study [Status Monitoring](status-monitoring.md) patterns
-- See [Tutorial Examples](../tutorials/sensor-networks.md) for hands-on practice
-
+# Alteriom Extensions Overview
+
+The Alteriom extensions provide production-ready, type-safe packages for common IoT scenarios. These extensions demonstrate best practices for the painlessMesh plugin system while providing immediately useful functionality for sensor networks, device control, and system monitoring.
+
+## What are Alteriom Extensions?
+
+Alteriom extensions are pre-built painlessMesh packages that handle common IoT communication patterns:
+
+- **Environmental Monitoring**: Temperature, humidity, pressure sensors
+- **Device Control**: Commands for actuators, displays, relays  
+- **Health Monitoring**: Device status, diagnostics, and telemetry
+- **Type Safety**: Compile-time validation and automatic serialization
+- **Production Ready**: Tested, documented, and optimized implementations
+
+## Package Types
+
+### SensorPackage (Type 200)
+For broadcasting environmental sensor data across the mesh.
+
+```cpp
+alteriom::SensorPackage sensor;
+sensor.temperature = 23.5;
+sensor.humidity = 65.0;
+sensor.pressure = 1013.25;
+sensor.sensorId = 1001;
+sensor.timestamp = mesh.getNodeTime();
+sensor.batteryLevel = 85;
+
+mesh.sendPackage(&sensor);
+```
+
+**Use Cases:**
+- Weather stations
+- Environmental monitoring
+- HVAC system feedback
+- Greenhouse automation
+- Industrial sensor networks
+
+### CommandPackage (Type 201)
+For sending control commands to specific devices.
+
+```cpp
+alteriom::CommandPackage cmd;
+cmd.dest = targetNodeId;
+cmd.command = 1; // LED_CONTROL
+cmd.targetDevice = 100; // LED strip ID
+cmd.parameters = "{\"brightness\":75,\"color\":\"blue\"}";
+cmd.commandId = generateCommandId();
+
+mesh.sendPackage(&cmd);
+```
+
+**Use Cases:**
+- Remote device control
+- Actuator management
+- Display updates
+- System configuration
+- Automation triggers
+
+### StatusPackage (Type 202)
+For broadcasting device health and operational status.
+
+```cpp
+alteriom::StatusPackage status;
+status.deviceStatus = 1; // OPERATIONAL
+status.uptime = millis() / 1000;
+status.freeMemory = ESP.getFreeHeap();
+status.wifiStrength = WiFi.RSSI();
+status.firmwareVersion = "1.2.3";
+
+mesh.sendPackage(&status);
+```
+
+**Use Cases:**
+- System monitoring
+- Predictive maintenance
+- Network diagnostics
+- Performance tracking
+- Remote troubleshooting
+
+## Key Features
+
+### Type Safety
+Compile-time validation prevents common messaging errors:
+
+```cpp
+// Compile error if field types don't match
+sensor.temperature = "invalid"; // ❌ Compiler error
+sensor.temperature = 25.0;      // ✅ Correct
+
+// IDE autocomplete for all fields
+sensor.| // IDE shows: temperature, humidity, pressure, etc.
+```
+
+### Automatic Serialization
+No manual JSON handling required:
+
+```cpp
+// Automatic serialization to JSON
+mesh.sendPackage(&sensor);
+
+// Automatic deserialization from JSON
+mesh.onPackage(200, [](protocol::Variant& variant) {
+    alteriom::SensorPackage received = variant.to<alteriom::SensorPackage>();
+    // All fields automatically populated
+});
+```
+
+### Cross-Platform Compatibility
+Works on ESP32, ESP8266, and desktop platforms:
+
+```cpp
+// TSTRING adapts to platform
+#ifdef ESP32
+    // Uses Arduino String class
+#else
+    // Uses std::string on desktop
+#endif
+```
+
+### Memory Optimization
+Efficient memory usage for resource-constrained devices:
+
+```cpp
+// Accurate buffer sizing
+size_t bufferSize = sensor.jsonObjectSize();
+
+// Minimal memory footprint
+// No unnecessary string copies or allocations
+```
+
+## Architecture Integration
+
+### Plugin System
+Alteriom packages integrate seamlessly with painlessMesh's plugin architecture:
+
+```
+Application Layer (Your Code)
+    ↓
+Alteriom Packages (SensorPackage, CommandPackage, StatusPackage)  
+    ↓
+painlessMesh Plugin System (SinglePackage, BroadcastPackage)
+    ↓
+painlessMesh Core (Mesh, Protocol, Network)
+```
+
+### Message Flow
+```
+Sensor Reading → SensorPackage → JSON → Mesh Network → JSON → SensorPackage → Handler
+```
+
+### Type ID Allocation
+Alteriom uses reserved type ID range 200-299:
+
+```cpp
+enum AlteriomTypes {
+    ALTERIOM_SENSOR = 200,    // SensorPackage
+    ALTERIOM_COMMAND = 201,   // CommandPackage  
+    ALTERIOM_STATUS = 202,    // StatusPackage
+    // 203-299 reserved for future Alteriom packages
+};
+```
+
+## Getting Started
+
+### 1. Include Alteriom Headers
+
+```cpp
+#include "painlessMesh.h"
+#include "examples/alteriom/alteriom_sensor_package.hpp"
+
+using namespace alteriom; // For convenience
+```
+
+### 2. Register Package Handlers
+
+```cpp
+void setup() {
+    mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
+    
+    // Register handlers for Alteriom packages
+    mesh.onPackage(ALTERIOM_SENSOR, handleSensorData);
+    mesh.onPackage(ALTERIOM_COMMAND, handleCommand);
+    mesh.onPackage(ALTERIOM_STATUS, handleStatus);
+}
+```
+
+### 3. Implement Handlers
+
+```cpp
+void handleSensorData(protocol::Variant& variant) {
+    SensorPackage sensor = variant.to<SensorPackage>();
+    
+    Serial.printf("Sensor %u: T=%.1f°C, H=%.1f%%, P=%.1f hPa\n",
+                 sensor.sensorId, sensor.temperature, 
+                 sensor.humidity, sensor.pressure);
+    
+    // Process sensor data (store, analyze, forward, etc.)
+    if (sensor.temperature > 30.0) {
+        triggerCooling();
+    }
+}
+
+void handleCommand(protocol::Variant& variant) {
+    CommandPackage cmd = variant.to<CommandPackage>();
+    
+    if (cmd.dest != mesh.getNodeId()) {
+        return; // Not for this node
+    }
+    
+    Serial.printf("Command %u for device %u: %u\n",
+                 cmd.commandId, cmd.targetDevice, cmd.command);
+    
+    // Execute command
+    executeDeviceCommand(cmd);
+    
+    // Send acknowledgment
+    sendCommandAcknowledgment(cmd);
+}
+```
+
+### 4. Send Packages
+
+```cpp
+// Send sensor data every 30 seconds
+Task taskSensorData(30000, TASK_FOREVER, [](){
+    SensorPackage sensor;
+    sensor.from = mesh.getNodeId();
+    sensor.temperature = readTemperature();
+    sensor.humidity = readHumidity();
+    sensor.pressure = readPressure();
+    sensor.sensorId = SENSOR_ID;
+    sensor.timestamp = mesh.getNodeTime();
+    sensor.batteryLevel = readBatteryLevel();
+    
+    mesh.sendPackage(&sensor);
+});
+```
+
+## Advanced Usage
+
+### Custom Command Types
+
+Define application-specific command types:
+
+```cpp
+enum DeviceCommands {
+    LED_CONTROL = 1,
+    SERVO_POSITION = 2,
+    RELAY_SWITCH = 3,
+    DISPLAY_UPDATE = 4,
+    SENSOR_CALIBRATION = 5
+};
+
+void executeDeviceCommand(const CommandPackage& cmd) {
+    switch(cmd.command) {
+        case LED_CONTROL:
+            handleLEDCommand(cmd);
+            break;
+        case SERVO_POSITION:
+            handleServoCommand(cmd);
+            break;
+        // ... other commands
+    }
+}
+```
+
+### Command Parameters
+
+Use JSON parameters for complex commands:
+
+```cpp
+void handleLEDCommand(const CommandPackage& cmd) {
+    // Parse JSON parameters
+    DynamicJsonDocument doc(256);
+    deserializeJson(doc, cmd.parameters);
+    
+    int brightness = doc["brightness"];
+    String color = doc["color"];
+    int duration = doc["duration"];
+    
+    // Execute LED control
+    setLEDColor(color);
+    setLEDBrightness(brightness);
+    if (duration > 0) {
+        scheduleAutoOff(duration);
+    }
+}
+```
+
+### Status Monitoring
+
+Implement comprehensive device monitoring:
+
+```cpp
+void sendStatusUpdate() {
+    StatusPackage status;
+    status.from = mesh.getNodeId();
+    status.deviceStatus = getDeviceStatus();
+    status.uptime = millis() / 1000;
+    status.freeMemory = ESP.getFreeHeap();
+    status.wifiStrength = WiFi.RSSI();
+    status.firmwareVersion = FIRMWARE_VERSION;
+    
+    // Add custom diagnostics
+    if (ESP.getFreeHeap() < 10000) {
+        status.deviceStatus |= STATUS_LOW_MEMORY;
+    }
+    if (WiFi.RSSI() < -80) {
+        status.deviceStatus |= STATUS_WEAK_SIGNAL;
+    }
+    
+    mesh.sendPackage(&status);
+}
+```
+
+### Error Handling
+
+Implement robust error handling:
+
+```cpp
+void handleSensorData(protocol::Variant& variant) {
+    try {
+        SensorPackage sensor = variant.to<SensorPackage>();
+        
+        // Validate sensor data
+        if (!isValidSensorReading(sensor)) {
+            Serial.printf("Invalid sensor data from node %u\n", sensor.from);
+            return;
+        }
+        
+        // Check data age
+        uint32_t age = mesh.getNodeTime() - sensor.timestamp;
+        if (age > MAX_DATA_AGE) {
+            Serial.printf("Stale sensor data (age: %u µs)\n", age);
+            return;
+        }
+        
+        processSensorData(sensor);
+        
+    } catch (const std::exception& e) {
+        Serial.printf("Error processing sensor data: %s\n", e.what());
+    }
+}
+```
+
+## Integration Patterns
+
+### Sensor Network Pattern
+
+Central collector with multiple sensor nodes:
+
+```cpp
+class SensorCollector {
+private:
+    std::map<uint32_t, SensorData> sensorReadings;
+    
+public:
+    void setup() {
+        mesh.onPackage(ALTERIOM_SENSOR, [this](protocol::Variant& variant) {
+            SensorPackage sensor = variant.to<SensorPackage>();
+            storeSensorReading(sensor);
+            return false;
+        });
+    }
+    
+    void storeSensorReading(const SensorPackage& sensor) {
+        sensorReadings[sensor.from] = {
+            sensor.temperature,
+            sensor.humidity, 
+            sensor.pressure,
+            sensor.timestamp
+        };
+        
+        // Trigger analysis
+        analyzeEnvironmentalData();
+    }
+};
+```
+
+### Command and Control Pattern
+
+Central controller managing multiple devices:
+
+```cpp
+class DeviceController {
+private:
+    std::map<uint32_t, DeviceInfo> devices;
+    
+public:
+    void controlDevice(uint32_t nodeId, uint32_t deviceId, 
+                      uint8_t command, const String& parameters) {
+        CommandPackage cmd;
+        cmd.dest = nodeId;
+        cmd.command = command;
+        cmd.targetDevice = deviceId;
+        cmd.parameters = parameters;
+        cmd.commandId = generateCommandId();
+        
+        mesh.sendPackage(&cmd);
+        
+        // Track pending command
+        pendingCommands[cmd.commandId] = {nodeId, millis()};
+    }
+    
+    void handleCommandAck(const CommandPackage& ack) {
+        auto it = pendingCommands.find(ack.commandId);
+        if (it != pendingCommands.end()) {
+            Serial.printf("Command %u acknowledged by node %u\n", 
+                         ack.commandId, ack.from);
+            pendingCommands.erase(it);
+        }
+    }
+};
+```
+
+### Health Monitoring Pattern
+
+Network-wide device health monitoring:
+
+```cpp
+class HealthMonitor {
+private:
+    std::map<uint32_t, DeviceHealth> deviceHealth;
+    
+public:
+    void setup() {
+        mesh.onPackage(ALTERIOM_STATUS, [this](protocol::Variant& variant) {
+            StatusPackage status = variant.to<StatusPackage>();
+            updateDeviceHealth(status);
+            return false;
+        });
+        
+        // Check for unhealthy devices every minute
+        userScheduler.addTask(Task(60000, TASK_FOREVER, [this]() {
+            checkDeviceHealth();
+        }));
+    }
+    
+    void updateDeviceHealth(const StatusPackage& status) {
+        deviceHealth[status.from] = {
+            status.deviceStatus,
+            status.uptime,
+            status.freeMemory,
+            status.wifiStrength,
+            mesh.getNodeTime() // Last seen
+        };
+    }
+    
+    void checkDeviceHealth() {
+        uint32_t now = mesh.getNodeTime();
+        
+        for (auto& [nodeId, health] : deviceHealth) {
+            uint32_t timeSinceLastSeen = now - health.lastSeen;
+            
+            if (timeSinceLastSeen > DEVICE_TIMEOUT) {
+                Serial.printf("Device %u appears offline\n", nodeId);
+                triggerAlert(nodeId, "Device offline");
+            }
+            
+            if (health.freeMemory < LOW_MEMORY_THRESHOLD) {
+                Serial.printf("Device %u low memory: %u bytes\n", 
+                             nodeId, health.freeMemory);
+                triggerAlert(nodeId, "Low memory");
+            }
+        }
+    }
+};
+```
+
+## Best Practices
+
+### Performance Optimization
+
+1. **Batch sensor readings** when possible
+2. **Use appropriate message frequency** (don't spam the network)
+3. **Implement message filtering** to avoid processing irrelevant data
+4. **Monitor memory usage** especially on ESP8266
+
+### Reliability
+
+1. **Validate all received data** before processing
+2. **Implement timeouts** for commands and responses
+3. **Handle network partitions** gracefully
+4. **Add retry logic** for critical commands
+
+### Security
+
+1. **Validate message sources** in handlers
+2. **Sanitize command parameters** before execution
+3. **Implement rate limiting** for commands
+4. **Consider encryption** for sensitive data
+
+### Testing
+
+1. **Test with realistic network loads**
+2. **Simulate node failures** and recovery
+3. **Validate under memory pressure**
+4. **Test with maximum expected node count**
+
+## Next Steps
+
+- Learn about [Sensor Packages](sensor-packages.md) in detail
+- Explore [Command System](command-system.md) implementation
+- Study [Status Monitoring](status-monitoring.md) patterns
+- See [Tutorial Examples](../tutorials/sensor-networks.md) for hands-on practice
+
 The Alteriom extensions provide a solid foundation for building robust IoT applications with painlessMesh. They demonstrate production-ready patterns while remaining flexible enough to adapt to your specific needs.