xml_jats_resolver 0.3.1 → 0.3.2

data/lib/dtd/jats/archiving/1.2d1/oasis_mathml3_dtd/JATS-default-mixes1.ent

@@ -0,0 +1,470 @@
+<!-- ============================================================= -->
+<!--  MODULE:    Default Element Mixes Module                      -->
+<!--  VERSION:   ANSI/NISO JATS Version 1.2d1 (Z39.96-2015)        -->
+<!--  DATE:      June 2017                                         -->
+<!--                                                               -->
+<!-- ============================================================= -->
+
+<!-- ============================================================= -->
+<!--                    PUBLIC DOCUMENT TYPE DEFINITION            -->
+<!--                        TYPICAL INVOCATION                     -->
+<!--
+"-//NLM//DTD JATS (Z39.96) Default Element Mixes Module v1.2d1 20170631//EN"
+Delivered as file "JATS-default-mixes1.ent"                        -->
+<!-- ============================================================= -->
+
+
+<!-- ============================================================= -->
+<!-- SYSTEM:     JATS DTD Suite                                    -->
+<!--                                                               -->
+<!-- PURPOSE:    Declares default values for all the element mixes -->
+<!--             used in the content models of the DTD Suite       -->
+<!--                                                               -->
+<!--             Mixes are Or-groups of classes, used in many      -->
+<!--             different content models. Mixes should not use    -->
+<!--             element names directly, only through classes.     -->
+<!--                                                               -->
+<!--             Note: Since PEs must be declared before they      -->
+<!--             are used, this module must be called after the    -->
+<!--             customize mixes module (if any).                  -->
+<!--                                                               -->
+<!-- TAG SET SPONSOR                                               -->
+<!--             National Center for Biotechnology                 -->
+<!--                Information (NCBI)                             -->
+<!--             National Library of Medicine (NLM)                -->
+<!--                                                               -->
+<!-- CREATED FOR:                                                  -->
+<!--             This module was created for the JATS DTD Suite.   -->
+<!--             Digital archives and publishers may use the       -->
+<!--             DTD as is for markup of journal literature or     -->
+<!--             related material for archiving and transferring   -->
+<!--             such material between archives or create a        -->
+<!--             custom XML DTD from the Suite for                 -->
+<!--             these purposes.                                   -->
+<!--                                                               -->
+<!--             This DTD is in the public domain. An organization -->
+<!--             that wishes to create its own DTD from the suite  -->
+<!--             may do so without permission from NLM.            -->
+<!--                                                               -->
+<!--             The suite has been set up to be extended using a  -->
+<!--             new DTD file and a new DTD-specific customization -->
+<!--             module to redefine the many Parameter Entities.   -->
+<!--             Do not modify the suite directly or redistribute  -->
+<!--             modified versions of the suite.                   -->
+<!--                                                               -->
+<!--             In the interest of maintaining consistency and    -->
+<!--             clarity for potential users, NLM requests:        -->
+<!--                                                               -->
+<!--             1. If you create a DTD from the JATS DTD Suite    -->
+<!--                and intend to stay compatible with the suite,  -->
+<!--                then please include the following statement    -->
+<!--                as a comment in all of your DTD modules:       -->
+<!--                   "Created from, and fully compatible with,   -->
+<!--                    the ANSI/NISO Z39.96 Journal Article Tag   -->
+<!--                    Suite (JATS)."                             -->
+<!--                                                               -->
+<!--             2. If you alter one or more modules of the suite, -->
+<!--                then please rename your version and all its    -->
+<!--                modules to avoid any confusion with the        -->
+<!--                original suite. Also, please include the       -->
+<!--                following statement as a comment in all your   -->
+<!--                DTD modules:                                   -->
+<!--                   "Based in part on, but not fully compatible -->
+<!--                    with, the ANSI/NISO Z39.96 Journal Article -->
+<!--                    Tag Suite (JATS)."                         -->
+<!--                                                               -->
+<!-- ORIGINAL CREATION DATE:                                       -->
+<!--             August 2004                                       -->
+<!--                                                               -->
+<!-- CREATED BY: Mulberry Technologies, Inc. for the NISO Z39.96   -->
+<!--             Working Group. Mulberry Technologies was          -->
+<!--             supported by National Center for Biotechnology    -->
+<!--             Information (NCBI), a center of the US National   -->
+<!--             Library of Medicine (NLM).                        -->
+<!--                                                               -->
+<!--             This module is part of the JATS DTD Suite. The    -->
+<!--             Suite is a continuation of work done by NCBI,     -->
+<!--             Mulberry Technologies, and Inera, Inc. on the NLM -->
+<!--             Journal Archiving and Interchange DTD Suite, which-->
+<!--             was originally released in December, 2002.        -->
+<!--                                                               -->
+<!--             NLM thanks the Harvard University Libraries, both -->
+<!--             for proposing that a draft archiving NLM DTD for  -->
+<!--             life sciences journals be extended to accommodate -->
+<!--             journals in all disciplines and for sponsoring    -->
+<!--             Inera Inc.'s collaboration with other DTD         -->
+<!--             authors in completing NLM Version 1.0. The        -->
+<!--             Andrew W. Mellon Foundation provided support for  -->
+<!--             these important contributions.                    -->
+<!--                                                               -->
+<!--             Suggestions for refinements and enhancements to   -->
+<!--             this DTD should be sent in email to:              -->
+<!--                 jats@ncbi.nlm.nih.gov                         -->
+<!-- ============================================================= -->
+
+
+<!-- ============================================================= -->
+<!--                    DTD VERSION/CHANGE HISTORY                 -->
+<!-- ============================================================= -->
+<!--
+Version  Reason/Occasion                   (who) vx.x (yyyy-mm-dd)
+    =============================================================
+     JATS Version 1.2d1              (DAL/BTU) v1.2d1  (2017-06-31)
+
+     NISO JATS is a continuing maintenance NISO Standard, which
+     requires voting by the ANSI and NISO memberships to be changed. 
+      
+     This draft DTD represents an interim version of the
+     non-normative JATS DTD Suite, as an indication to JATS users
+     the decisions that have been made by the JATS Standing
+     Committee. This draft has not yet been given public review 
+     or voting. The formal public identifiers were changed in the 
+     modules and the catalogs.
+ 
+ 10. JATS became version "1.2d1" and "v1.1d2 20170631" 
+
+     =============================================================
+     JATS Version 1.1                (DAL/BTU) v1.1  (2015-12-15)
+
+     JATS is a continuing maintenance NISO Standard, which
+     requires voting by the ANSI and NISO memberships to be changed. 
+     JATS 1.1 was approved in late 2015, so the formal public 
+     identifiers were changed in the modules and the catalogs.
+     No model or attribute changes were made at this time. 
+ 
+  9. JATS became version "1.1" and "v1.1 20151215"
+
+     =============================================================
+     JATS Version 1.1d3             (DAL/BTU) v1.1d3  (2015-03-01)
+   
+     The changes in this release are in response to NISO 
+     License and Indicators Recommended Practice.
+
+     NISO JATS is a continuing maintenance NISO Standard, which 
+     requires voting by the NISO membership to be changed. This
+     Committee Draft 1.1d3 will be sent to the NISO voting
+     membership, to become (if approved) NISO JATS 1.1.
+     
+     This draft DTD represents an interim version of the
+     non-normative JATS DTD Suite, as an indication to JATS users
+     the decisions that have been made by the JATS Standing
+     Committee.
+
+  8. JATS became version "1.1d3" and "v1.1 20150301//EN"
+
+     =============================================================
+     JATS Version 1.1d2              (DAL/BTU) v1.1d2 (2014-09-30)
+   
+     NISO JATS is a continuing maintenance NISO Standard, which 
+     requires voting by the NISO membership to be changed. This
+     Committee Draft 1.1d2 will be sent to the NISO voting
+     membership, to become (if approved) NISO JATS 1.1.
+     
+     This catalog represents an interim version of the
+     non-normative JATS DTD Suite, as an indication to JATS users
+     the decisions that have been made by the JATS Standing
+     Committee.
+
+  7. JATS became version "1.1d2" and "v1.1d2 20140930//EN"
+    
+     =============================================================
+     NISO JATS Version 1.1d1           (DAL/BTU) v1.1 (2013-11-15)
+   
+     ANSI/NISO Z39.96-2012 (pre-release for V1.0 BITS; Version 1.1d1) 
+
+     NISO JATS Standing Committee met and answered the requests and
+     suggestions from the NISO request forms.
+
+     Details concerning ANSI/NISO Z39.96-2012 JATS-based DTDs,  
+     XSDs, RNGs and supporting documentation are available at
+           http://jats.nlm.nih.gov/1.0/
+
+  6. PARAGRAPH IN TABLE CELL - Added <p> to the contents of
+     table cells, through %inside-cell; (using
+     %nothing-but-para.class;).
+   
+     =============================================================
+     NISO JATS Version 1.0             (DAL/BTU) v1.0 (2012-xx-xx)
+   
+     ANSI/NISO Z39.96-2012 (Version 1.0) 
+
+     Details concerning ANSI/NISO Z39.96-2012 JATS-based DTDs,  
+     XSDs, RNGs and supporting documentation are available at
+           http://jats.nlm.nih.gov/1.0/
+   
+  5. PARA-LEVEL PARAMETER ENTITY CONFLICT - Changed the parameter
+     entity %para-level; to use the PE %nothing-but-para.class;,
+     removing the similar PE "just-para.class;". It is possible to 
+     add element(s) to %just-para.class;, so that the added element(s)
+     may be used everywhere <p> is used. Such elements would also be
+     named in %block-display.class;. This would lead to a conflict
+     in %para-level; if both %just-para.class; and
+     %block-display.class; named <p>. So %just-para.class; is replaced
+     here in %para-level;. This is backward compatible for all XML
+     documents. If a JATS customization has modified %just-para.class;
+     they may need to change their customization to accommodate.
+   
+  4. Updated the DTD-version attribute to "1.0" and the formal
+     public identifier to the date: "v1.0 20120330//EN".
+
+     =============================================================
+     Version 0.4                       (DAL/BTU) v0.4 (2011-01-31)
+   
+     This Tag Set is in the process of becoming a NISO standard.
+     The version numbers are starting over from 0.4", as a Trial
+     Use Draft, to be made into "Version 1.0" when the Tag Suite 
+     becomes a NISO standard. Thus, the version number that would
+     have been "NLM Version 3.1 Draft" has become NISO JATS
+     "Version 0.4".
+
+     Details on NISO Trial Use Draft Version 0.4 are available at
+           http://jats.nlm.nih.gov/JATS-0.4.
+   
+  3. Updated the DTD-version attribute to "0.4" 
+   
+  2. Updated the public identifier to "v0.4 20110131", 
+     modified the formal public identifier to include "JATS (Z39.96)",
+     and the filename as delivered to include "JATS" and the
+     new version number "0".
+           http://jats.nlm.nih.gov/0.4.
+
+     =============================================================
+     Version 3.0                       (DAL/BTU) v3.0 (2007-10-31)
+
+     Version 3.0 is the first non-backward-compatible release.
+     In addition to the usual incremental changes, some
+     elements and attributes have been renamed and/or remodeled
+     to better meet user needs and to increase tag set consistency.
+     All module change histories are available through the Tag Suite
+     web site at http://dtd.nlm.nih.gov.
+
+     Details on version 3.0 are available at
+           http://dtd.nlm.nih.gov/3.0.
+
+  1. Updated public identifier to "v3.0 20080202//EN"              -->
+
+<!-- ============================================================= -->
+<!-- Details concerning 
+     ANSI/NISO Z39.96-2015 JATS-based DTDs, XSDs, 
+     RNGs and supporting documentation are available at
+           http://jats.nlm.nih.gov/1.1/                            -->
+
+<!-- ============================================================= -->
+<!--                    ELEMENT MIXES FOR USE IN CONTENT MODELS    -->
+<!--                    (MIXES ARE COMPOSED USING CLASSES)         -->
+<!-- ============================================================= -->
+
+
+<!--                    SECTION-LEVEL ELEMENTS                     -->
+<!--                    Elements that may be used at the same
+                        structural level as a Section for example
+                        inside the Body <body>                     -->
+<!ENTITY % sec-level    "%sec.class;"                                >
+
+
+<!-- ============================================================= -->
+<!--                    BACK MATTER ELEMENT MIXES(%backmatter.ent;)-->
+<!-- ============================================================= -->
+
+
+<!--                    DOCUMENT BACK MATTER ELEMENTS              -->
+<!--                    Back Matter Elements used by a full document
+                        such as a journal article. This is an element
+                        grouping rather than a class. These
+                        elements may also appear in the content models
+                        of structural elements, such as back matter.
+                        (Note: Technically this should have used
+                        %sec.class;, but %sec-level; was used in an
+                        earlier release and backwards compatibility
+                        must be maintained.                        -->
+<!ENTITY % doc-back-matter-mix
+                        "%back.class; | %front-back.class; |
+                         %sec.class;"                                >
+
+
+<!--                    SECTION BACK MATTER ELEMENTS               -->
+<!--                    Back matter elements used inside smaller
+                        structures, such as sections and sidebars  -->
+<!ENTITY % sec-back-matter-mix
+                        "%front-back.class; | %sec-back.class;"      >
+
+
+<!-- ============================================================= -->
+<!--                    PARAGRAPH-LEVEL ELEMENT MIXES              -->
+<!-- ============================================================= -->
+
+
+<!--                    PARAGRAPH-LEVEL ELEMENTS                   -->
+<!--                    Elements that may be used at the same
+                        structural level as a paragraph, for
+                        example inside a Section
+                        Note: There a major overlap between this
+                        parameter entity and that for the elements
+                        that are at the same level as a paragraph.
+                        Inline elements appear only inside a
+                        paragraph, but block elements such as quotes
+                        and lists may appear either within a
+                        paragraph or at the same level as a
+                        paragraph. This serves a requirement in a
+                        repository DTD, since some incoming material
+                        will have restricted such elements to only
+                        inside a paragraph,  some incoming material
+                        will have restricted them to only outside a
+                        paragraph and some may allow them in both
+                        places. Thus the DTD must allow for them to
+                        be in either or both.                      -->
+<!ENTITY % para-level   "%block-display.class; | %block-math.class; |
+                         %list.class; | %math.class; | 
+                         %nothing-but-para.class; | 
+                         %related-article.class; |
+                         %rest-of-para.class;"                       >
+
+
+<!-- ============================================================= -->
+<!--                    TABLE ELEMENT MIXES                        -->
+<!-- ============================================================= -->
+
+
+<!--                    INSIDE TABLE CELL ELEMENTS                 -->
+<!--                    Mixed with #PCDATA inside a table cell, such
+                        as a <td> or <th> element in the XHTML table
+                        model, the <entry> element in the OASIS CALS
+                        table model, etc.  This PE will be used as the
+                        value of %Flow.mix;, %paracon;, etc.
+                        ### Usage Alert ###
+                        Design Note: Inside cell is an exception, an
+                        inline mix that does not start with an OR
+                        bar. This is because is used within the
+                        PE -%Flow.mix;, which is an inline mix
+                        defined in the course of the XHTML Table DTD,
+                        a DTD not under control of this DTD Suite. -->
+<!ENTITY % inside-cell  "%address-link.class; |  %appearance.class; |
+                         %article-link.class; |
+                         %block-math.class; | %break.class; |
+                         %citation.class; | %emphasis.class; |
+                         %inline-math.class; |
+                         %list.class; | %math.class; |
+                         %nothing-but-para.class; |
+                         %phrase.class; | %simple-display.class; |
+                         %inline-display-noalt.class; |
+                         %simple-link.class; | %subsup.class;"       >
+
+
+<!--                    INSIDE TABLE WRAPPER ELEMENTS              -->
+<!--                    Usually a Table Wrapper contains a table,
+                        properly tagged with rows and columns, but
+                        sometimes, a structure that is labeled as
+                        a "table" is actually a list, or two
+                        paragraphs.  This Parameter Entity names
+                        all the alternatives to table that may
+                        occur inside a table wrapper.              -->
+<!ENTITY % inside-table-wrap
+                        "%intable-para.class; | %list.class; |
+                         %simple-intable-display.class;  |
+                         %table.class;"                              >
+
+
+<!-- ============================================================= -->
+<!--                    INLINE ELEMENT MIXES                       -->
+<!-- ============================================================= -->
+
+
+<!--                    EMPHASIS MIX ELEMENTS                      -->
+<!--                    Elements that may be used inside most of the
+                        emphasis class elements
+                        Design Note: Inline mixes begin with an
+                        OR bar                                     -->
+<!ENTITY % emphasized-text
+                        "| %address-link.class; |
+                         %article-link.class; | %emphasis.class;  |
+                         %inline-display.class; |
+                         %inline-math.class; | %math.class; |
+                         %phrase.class; | %simple-link.class; |
+                         %subsup.class;"                             >
+
+
+<!--                    JUST RENDITION                             -->
+<!--                    Only the simplest of the typographic
+                        emphasis elements, as well as subscript and
+                        superscript.  Usually used in a model that
+                        allows #PCDATA and this restricted mixture.
+                        This mix may be stripped down to only
+                        subscript and superscript by some, more
+                        restrictive DTDs.
+                        MAINTENANCE NOTE: This Parameter Entity
+                        and the related PE "rendition-plus" have
+                        been put in place to restrict the amount of
+                        variability that a person modifying the DTD
+                        through PE redefinition can achieve. Some
+                        elements have been set #PCDATA plus one PE
+                        and some have been set to #PCDATA plus the
+                        other in an effort to allow designers to
+                        modify entire groups of elements, but not
+                        to change similar models individually .
+                        Design Note: Inline mixes begin with an
+                        OR bar                                     -->
+<!ENTITY % just-rendition
+                        "| %emphasis.class;  | %subsup.class; |
+                         %phrase-content.class;"                     >
+
+
+<!--                    RENDITION MARKUP PLUS                      -->
+<!--                    Only the simplest of the typographic
+                        emphasis elements, as well as subscript and
+                        superscript.  Usually used in a model that
+                        allows #PCDATA and this restricted mixture.
+                        This mix may be enhanced slightly in some
+                        more permissive DTDs, and should always
+                        contain at least typographic emphasis,
+                        subscript, and superscript.
+                        MAINTENANCE NOTE:: This Parameter Entity
+                        and the related PE "just-rendition" have
+                        been put in place to restrict the amount of
+                        variability that a person modifying the DTD
+                        through PE redefinition can achieve. Some
+                        elements have been set #PCDATA plus one PE
+                        and some have been set to #PCDATA plus the
+                        other in an effort to allow designers to
+                        modify entire groups of elements, but not
+                        to individually change similar models.
+                        modify entire groups of elements, but not
+                        to change similar models individually .
+                        Design Note: Inline mixes begin with an
+                        OR bar                                     -->
+<!ENTITY % rendition-plus
+                        "| %emphasis.class;  | %subsup.class; |
+                         %phrase-content.class;"                     >
+
+
+<!--                    SIMPLE PHRASE-LEVEL TEXTUAL ELEMENTS       -->
+<!--                    Elements that may be used almost anywhere
+                        text is used, for example, inside a title.
+                        Simple text plus inline display and math
+                        elements. In practice, This is the next step
+                        up from "simple-text", adding the links.
+                        Design Note: Inline mixes begin with an
+                        OR bar                                     -->
+<!ENTITY % simple-phrase
+                        "| %address-link.class; |
+                         %article-link.class; | %emphasis.class; |
+                         %inline-display.class; |
+                         %inline-math.class; | %math.class; |
+                         %phrase.class; | %simple-link.class; |
+                         %subsup.class;"                             >
+
+
+<!--                    SIMPLE TEXTUAL CONTENT                     -->
+<!--                    Elements that may be used inside elements
+                        that are really expected to be #PCDATA and
+                        not to contain any of these things.
+                        Note that there is only inline math and no 
+                        links.
+                        Simpler even than %simple-phrase;
+                        Design Note: Inline mixes begin with an
+                        OR bar                                     -->
+<!ENTITY % simple-text  "| %emphasis.class; | %inline-display.class; |
+                         %inline-math.class; | %phrase.class; |
+                         %subsup.class; "                            >
+
+
+<!-- ================== End Archiving DTD Mixes Customization ==== -->