wiringpi-ruby 2.0.0 → 2.1.3

data/ext/wiringpi/WiringPi/examples/ds1302.c

@@ -0,0 +1,238 @@
+/*
+ * ds1302.c:
+ *	Real Time clock
+ *
+ * Copyright (c) 2013 Gordon Henderson.
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <time.h>
+
+#include <wiringPi.h>
+#include <ds1302.h>
+
+// Register defines
+
+#define	RTC_SECS	 0
+#define	RTC_MINS	 1
+#define	RTC_HOURS	 2
+#define	RTC_DATE	 3
+#define	RTC_MONTH	 4
+#define	RTC_DAY		 5
+#define	RTC_YEAR	 6
+#define	RTC_WP		 7
+#define	RTC_TC		 8
+#define	RTC_BM		31
+
+
+static unsigned int masks [] = { 0x7F, 0x7F, 0x3F, 0x3F, 0x1F, 0x07, 0xFF } ;
+
+
+/*
+ * bcdToD: dToBCD:
+ *	BCD decode/encode
+ *********************************************************************************
+ */
+
+static int bcdToD (unsigned int byte, unsigned int mask)
+{
+  unsigned int b1, b2 ;
+  byte &= mask ;
+  b1 = byte & 0x0F ;
+  b2 = ((byte >> 4) & 0x0F) * 10 ;
+  return b1 + b2 ;
+}
+
+static unsigned int dToBcd (unsigned int byte)
+{
+  return ((byte / 10) << 4) + (byte % 10) ;
+}
+
+
+/*
+ * ramTest:
+ *	Simple test of the 31 bytes of RAM inside the DS1302 chip
+ *********************************************************************************
+ */
+
+static int ramTestValues [] =
+  { 0x00, 0xFF, 0xAA, 0x55, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00, 0xF0, 0x0F, -1 } ;
+
+static int ramTest (void)
+{
+  int addr ;
+  int got ;
+  int i = 0 ;
+  int errors = 0 ;
+  int testVal ;
+
+  printf ("DS1302 RAM TEST\n") ;
+
+  testVal = ramTestValues [i] ;
+
+  while (testVal != -1)
+  {
+    for (addr = 0 ; addr < 31 ; ++addr)
+      ds1302ramWrite (addr, testVal) ;
+
+    for (addr = 0 ; addr < 31 ; ++addr)
+      if ((got = ds1302ramRead (addr)) != testVal)
+      {
+	printf ("DS1302 RAM Failure: Address: %2d, Expected: 0x%02X, Got: 0x%02X\n",
+		addr, testVal, got) ;
+	++errors ;
+      }
+    testVal = ramTestValues [++i] ;
+  }
+
+  for (addr = 0 ; addr < 31 ; ++addr)
+    ds1302ramWrite (addr, addr) ;
+
+  for (addr = 0 ; addr < 31 ; ++addr)
+    if ((got = ds1302ramRead (addr)) != addr)
+    {
+      printf ("DS1302 RAM Failure: Address: %2d, Expected: 0x%02X, Got: 0x%02X\n",
+	      addr, addr, got) ;
+      ++errors ;
+    }
+
+  if (errors == 0)
+    printf ("-- DS1302 RAM TEST: OK\n") ;
+  else
+    printf ("-- DS1302 RAM TEST FAILURE. %d errors.\n", errors) ;
+
+  return 0 ;
+}
+
+/*
+ * setLinuxClock:
+ *	Set the Linux clock from the hardware
+ *********************************************************************************
+ */
+
+static int setLinuxClock (void)
+{
+  char dateTime [20] ;
+  char command [64] ;
+  int  clock [8] ;
+
+
+  printf ("Setting the Linux Clock from the DS1302... ") ; fflush (stdout) ;
+
+  ds1302clockRead (clock) ;
+
+// [MMDDhhmm[[CC]YY][.ss]]
+
+  sprintf (dateTime, "%02d%02d%02d%02d%02d%02d.%02d",
+	bcdToD (clock [RTC_MONTH], masks [RTC_MONTH]),
+	bcdToD (clock [RTC_DATE],  masks [RTC_DATE]),
+	bcdToD (clock [RTC_HOURS], masks [RTC_HOURS]),
+	bcdToD (clock [RTC_MINS],  masks [RTC_MINS]),
+	20,
+	bcdToD (clock [RTC_YEAR],  masks [RTC_YEAR]),
+	bcdToD (clock [RTC_SECS],  masks [RTC_SECS])) ;
+
+  sprintf (command, "/bin/date %s", dateTime) ;
+  system (command) ;
+
+  return 0 ;
+}
+
+
+/*
+ * setDSclock:
+ *	Set the DS1302 block from Linux time
+ *********************************************************************************
+ */
+
+static int setDSclock (void)
+{
+  struct tm t ;
+  time_t now ;
+  int clock [8] ;
+
+  printf ("Setting the clock in the DS1302 from Linux time... ") ;
+
+  now = time (NULL) ;
+  gmtime_r (&now, &t) ;
+
+  clock [ 0] = dToBcd (t.tm_sec) ;	// seconds
+  clock [ 1] = dToBcd (t.tm_min) ;	// mins
+  clock [ 2] = dToBcd (t.tm_hour) ;	// hours
+  clock [ 3] = dToBcd (t.tm_mday) ;	// date
+  clock [ 4] = dToBcd (t.tm_mon + 1) ;	// months 0-11 --> 1-12
+  clock [ 5] = dToBcd (t.tm_wday + 1) ;	// weekdays (sun 0)
+  clock [ 6] = dToBcd (t.tm_year - 100) ;       // years
+  clock [ 7] = 0 ;			// W-Protect off
+
+  ds1302clockWrite (clock) ;
+
+  printf ("OK\n") ;
+
+  return 0 ;
+}
+
+
+
+
+int main (int argc, char *argv [])
+{
+  int i ;
+  int clock [8] ;
+
+  wiringPiSetup () ;
+  ds1302setup   (0, 1, 2) ;
+
+  if (argc == 2)
+  {
+    /**/ if (strcmp (argv [1], "-slc") == 0)
+      return setLinuxClock () ;
+    else if (strcmp (argv [1], "-sdsc") == 0)
+      return setDSclock () ;
+    else if (strcmp (argv [1], "-rtest") == 0)
+      return ramTest () ;
+    else
+    {
+      printf ("Usage: ds1302 [-slc | -sdsc | -rtest]\n") ;
+      return EXIT_FAILURE ;
+    }
+  }
+
+  for (i = 0 ;; ++i)
+  {
+    printf ("%5d:  ", i) ;
+
+    ds1302clockRead (clock) ;
+    printf (" %2d:%02d:%02d",
+	bcdToD (clock [2], masks [2]), bcdToD (clock [1], masks [1]), bcdToD (clock [0], masks [0])) ;
+
+    printf (" %2d/%02d/%04d",
+	bcdToD (clock [3], masks [3]), bcdToD (clock [4], masks [4]), bcdToD (clock [6], masks [6]) + 2000) ;
+      
+    printf ("\n") ;
+
+    delay (200) ;
+  }
+ 
+  return 0 ;
+}

data/ext/wiringpi/WiringPi/examples/header.h

@@ -0,0 +1,23 @@
+/*
+ * file.c:
+ *
+ * Copyright (c) 2012-2013 Gordon Henderson. <projects@drogon.net>
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+

data/ext/wiringpi/WiringPi/examples/isr-osc.c

@@ -0,0 +1,118 @@
+/*
+ * isr-osc.c:
+ *	Wait for Interrupt test program - ISR method - interrupt oscillator
+ *
+ *	How to test:
+ *
+ *	IMPORTANT: To run this test we connect 2 GPIO pins together, but
+ *	before we do that YOU must make sure that they are both setup
+ *	the right way. If they are set to outputs and one is high and one low,
+ *	then you connect the wire, you'll create a short and that won't be good.
+ *
+ *	Before making the connection, type:
+ *		gpio mode 0 output
+ *		gpio write 0 0
+ *		gpio mode 1 input
+ *	then you can connect them together.
+ *
+ *	Run the program, then:
+ *		gpio write 0 1
+ *		gpio write 0 0
+ *
+ *	at which point it will trigger an interrupt and the program will
+ *	then do the up/down toggling for itself and run at full speed, and
+ *	it will report the number of interrupts recieved every second.
+ *
+ *	Copyright (c) 2013 Gordon Henderson. projects@drogon.net
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <wiringPi.h>
+
+
+// What GPIO input are we using?
+//	This is a wiringPi pin number
+
+#define	OUT_PIN		0
+#define	IN_PIN		1
+
+// globalCounter:
+//	Global variable to count interrupts
+//	Should be declared volatile to make sure the compiler doesn't cache it.
+
+static volatile int globalCounter = 0 ;
+
+/*
+ * myInterrupt:
+ *********************************************************************************
+ */
+
+void myInterrupt (void)
+{
+  digitalWrite (OUT_PIN, 1) ;
+  ++globalCounter ;
+  digitalWrite (OUT_PIN, 0) ;
+}
+
+
+/*
+ *********************************************************************************
+ * main
+ *********************************************************************************
+ */
+
+int main (void)
+{
+  int myCounter   = 0 ;
+  int lastCounter = 0 ;
+
+  if (wiringPiSetup () < 0)
+  {
+    fprintf (stderr, "Unable to setup wiringPi: %s\n", strerror (errno)) ;
+    return 1 ;
+  }
+
+  pinMode (OUT_PIN, OUTPUT) ;
+  pinMode (IN_PIN,  INPUT) ;
+
+  if (wiringPiISR (IN_PIN, INT_EDGE_FALLING, &myInterrupt) < 0)
+  {
+    fprintf (stderr, "Unable to setup ISR: %s\n", strerror (errno)) ;
+    return 1 ;
+  }
+
+  for (;;)
+  {
+    printf ("Waiting ... ") ; fflush (stdout) ;
+
+    while (myCounter == globalCounter)
+      delay (1000) ;
+
+    printf (" Done. counter: %6d: %6d\n",
+		globalCounter, myCounter - lastCounter) ;
+    lastCounter = myCounter ;
+    myCounter   = globalCounter ;
+  }
+
+  return 0 ;
+}

data/ext/wiringpi/WiringPi/examples/isr.c

@@ -0,0 +1,110 @@
+/*
+ * isr.c:
+ *	Wait for Interrupt test program - ISR method
+ *
+ *	How to test:
+ *	  Use the SoC's pull-up and pull down resistors that are avalable
+ *	on input pins. So compile & run this program (via sudo), then
+ *	in another terminal:
+ *		gpio mode 0 up
+ *		gpio mode 0 down
+ *	at which point it should trigger an interrupt. Toggle the pin
+ *	up/down to generate more interrupts to test.
+ *
+ * Copyright (c) 2013 Gordon Henderson.
+ ***********************************************************************
+ * This file is part of wiringPi:
+ *	https://projects.drogon.net/raspberry-pi/wiringpi/
+ *
+ *    wiringPi is free software: you can redistribute it and/or modify
+ *    it under the terms of the GNU Lesser General Public License as published by
+ *    the Free Software Foundation, either version 3 of the License, or
+ *    (at your option) any later version.
+ *
+ *    wiringPi is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU Lesser General Public License for more details.
+ *
+ *    You should have received a copy of the GNU Lesser General Public License
+ *    along with wiringPi.  If not, see <http://www.gnu.org/licenses/>.
+ ***********************************************************************
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <wiringPi.h>
+
+
+// globalCounter:
+//	Global variable to count interrupts
+//	Should be declared volatile to make sure the compiler doesn't cache it.
+
+static volatile int globalCounter [8] ;
+
+
+/*
+ * myInterrupt:
+ *********************************************************************************
+ */
+
+void myInterrupt0 (void) { ++globalCounter [0] ; }
+void myInterrupt1 (void) { ++globalCounter [1] ; }
+void myInterrupt2 (void) { ++globalCounter [2] ; }
+void myInterrupt3 (void) { ++globalCounter [3] ; }
+void myInterrupt4 (void) { ++globalCounter [4] ; }
+void myInterrupt5 (void) { ++globalCounter [5] ; }
+void myInterrupt6 (void) { ++globalCounter [6] ; }
+void myInterrupt7 (void) { ++globalCounter [7] ; }
+
+
+/*
+ *********************************************************************************
+ * main
+ *********************************************************************************
+ */
+
+int main (void)
+{
+  int gotOne, pin ;
+  int myCounter [8] ;
+
+  for (pin = 0 ; pin < 8 ; ++pin) 
+    globalCounter [pin] = myCounter [pin] = 0 ;
+
+  wiringPiSetup () ;
+
+  wiringPiISR (0, INT_EDGE_FALLING, &myInterrupt0) ;
+  wiringPiISR (1, INT_EDGE_FALLING, &myInterrupt1) ;
+  wiringPiISR (2, INT_EDGE_FALLING, &myInterrupt2) ;
+  wiringPiISR (3, INT_EDGE_FALLING, &myInterrupt3) ;
+  wiringPiISR (4, INT_EDGE_FALLING, &myInterrupt4) ;
+  wiringPiISR (5, INT_EDGE_FALLING, &myInterrupt5) ;
+  wiringPiISR (6, INT_EDGE_FALLING, &myInterrupt6) ;
+  wiringPiISR (7, INT_EDGE_FALLING, &myInterrupt7) ;
+
+  for (;;)
+  {
+    gotOne = 0 ;
+    printf ("Waiting ... ") ; fflush (stdout) ;
+
+    for (;;)
+    {
+      for (pin = 0 ; pin < 8 ; ++pin)
+      {
+	if (globalCounter [pin] != myCounter [pin])
+	{
+	  printf (" Int on pin %d: Counter: %5d\n", pin, globalCounter [pin]) ;
+	  myCounter [pin] = globalCounter [pin] ;
+	  ++gotOne ;
+	}
+      }
+      if (gotOne != 0)
+	break ;
+    }
+  }
+
+  return 0 ;
+}