wasmtime 17.0.1 → 18.0.3

data/ext/cargo-vendor/tokio-1.36.0/src/net/unix/pipe.rs

@@ -0,0 +1,1442 @@
+//! Unix pipe types.
+
+use crate::io::interest::Interest;
+use crate::io::{AsyncRead, AsyncWrite, PollEvented, ReadBuf, Ready};
+
+use mio::unix::pipe as mio_pipe;
+use std::fs::File;
+use std::io::{self, Read, Write};
+use std::os::unix::fs::OpenOptionsExt;
+use std::os::unix::io::{AsFd, AsRawFd, BorrowedFd, FromRawFd, IntoRawFd, OwnedFd, RawFd};
+use std::path::Path;
+use std::pin::Pin;
+use std::task::{Context, Poll};
+
+cfg_io_util! {
+    use bytes::BufMut;
+}
+
+/// Creates a new anonymous Unix pipe.
+///
+/// This function will open a new pipe and associate both pipe ends with the default
+/// event loop.
+///
+/// If you need to create a pipe for communication with a spawned process, you can
+/// use [`Stdio::piped()`] instead.
+///
+/// [`Stdio::piped()`]: std::process::Stdio::piped
+///
+/// # Errors
+///
+/// If creating a pipe fails, this function will return with the related OS error.
+///
+/// # Examples
+///
+/// Create a pipe and pass the writing end to a spawned process.
+///
+/// ```no_run
+/// use tokio::net::unix::pipe;
+/// use tokio::process::Command;
+/// # use tokio::io::AsyncReadExt;
+/// # use std::error::Error;
+///
+/// # async fn dox() -> Result<(), Box<dyn Error>> {
+/// let (tx, mut rx) = pipe::pipe()?;
+/// let mut buffer = String::new();
+///
+/// let status = Command::new("echo")
+///     .arg("Hello, world!")
+///     .stdout(tx.into_blocking_fd()?)
+///     .status();
+/// rx.read_to_string(&mut buffer).await?;
+///
+/// assert!(status.await?.success());
+/// assert_eq!(buffer, "Hello, world!\n");
+/// # Ok(())
+/// # }
+/// ```
+///
+/// # Panics
+///
+/// This function panics if it is not called from within a runtime with
+/// IO enabled.
+///
+/// The runtime is usually set implicitly when this function is called
+/// from a future driven by a tokio runtime, otherwise runtime can be set
+/// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+pub fn pipe() -> io::Result<(Sender, Receiver)> {
+    let (tx, rx) = mio_pipe::new()?;
+    Ok((Sender::from_mio(tx)?, Receiver::from_mio(rx)?))
+}
+
+/// Options and flags which can be used to configure how a FIFO file is opened.
+///
+/// This builder allows configuring how to create a pipe end from a FIFO file.
+/// Generally speaking, when using `OpenOptions`, you'll first call [`new`],
+/// then chain calls to methods to set each option, then call either
+/// [`open_receiver`] or [`open_sender`], passing the path of the FIFO file you
+/// are trying to open. This will give you a [`io::Result`] with a pipe end
+/// inside that you can further operate on.
+///
+/// [`new`]: OpenOptions::new
+/// [`open_receiver`]: OpenOptions::open_receiver
+/// [`open_sender`]: OpenOptions::open_sender
+///
+/// # Examples
+///
+/// Opening a pair of pipe ends from a FIFO file:
+///
+/// ```no_run
+/// use tokio::net::unix::pipe;
+/// # use std::error::Error;
+///
+/// const FIFO_NAME: &str = "path/to/a/fifo";
+///
+/// # async fn dox() -> Result<(), Box<dyn Error>> {
+/// let rx = pipe::OpenOptions::new().open_receiver(FIFO_NAME)?;
+/// let tx = pipe::OpenOptions::new().open_sender(FIFO_NAME)?;
+/// # Ok(())
+/// # }
+/// ```
+///
+/// Opening a [`Sender`] on Linux when you are sure the file is a FIFO:
+///
+/// ```ignore
+/// use tokio::net::unix::pipe;
+/// use nix::{unistd::mkfifo, sys::stat::Mode};
+/// # use std::error::Error;
+///
+/// // Our program has exclusive access to this path.
+/// const FIFO_NAME: &str = "path/to/a/new/fifo";
+///
+/// # async fn dox() -> Result<(), Box<dyn Error>> {
+/// mkfifo(FIFO_NAME, Mode::S_IRWXU)?;
+/// let tx = pipe::OpenOptions::new()
+///     .read_write(true)
+///     .unchecked(true)
+///     .open_sender(FIFO_NAME)?;
+/// # Ok(())
+/// # }
+/// ```
+#[derive(Clone, Debug)]
+pub struct OpenOptions {
+    #[cfg(target_os = "linux")]
+    read_write: bool,
+    unchecked: bool,
+}
+
+impl OpenOptions {
+    /// Creates a blank new set of options ready for configuration.
+    ///
+    /// All options are initially set to `false`.
+    pub fn new() -> OpenOptions {
+        OpenOptions {
+            #[cfg(target_os = "linux")]
+            read_write: false,
+            unchecked: false,
+        }
+    }
+
+    /// Sets the option for read-write access.
+    ///
+    /// This option, when true, will indicate that a FIFO file will be opened
+    /// in read-write access mode. This operation is not defined by the POSIX
+    /// standard and is only guaranteed to work on Linux.
+    ///
+    /// # Examples
+    ///
+    /// Opening a [`Sender`] even if there are no open reading ends:
+    ///
+    /// ```ignore
+    /// use tokio::net::unix::pipe;
+    ///
+    /// let tx = pipe::OpenOptions::new()
+    ///     .read_write(true)
+    ///     .open_sender("path/to/a/fifo");
+    /// ```
+    ///
+    /// Opening a resilient [`Receiver`] i.e. a reading pipe end which will not
+    /// fail with [`UnexpectedEof`] during reading if all writing ends of the
+    /// pipe close the FIFO file.
+    ///
+    /// [`UnexpectedEof`]: std::io::ErrorKind::UnexpectedEof
+    ///
+    /// ```ignore
+    /// use tokio::net::unix::pipe;
+    ///
+    /// let tx = pipe::OpenOptions::new()
+    ///     .read_write(true)
+    ///     .open_receiver("path/to/a/fifo");
+    /// ```
+    #[cfg(target_os = "linux")]
+    #[cfg_attr(docsrs, doc(cfg(target_os = "linux")))]
+    pub fn read_write(&mut self, value: bool) -> &mut Self {
+        self.read_write = value;
+        self
+    }
+
+    /// Sets the option to skip the check for FIFO file type.
+    ///
+    /// By default, [`open_receiver`] and [`open_sender`] functions will check
+    /// if the opened file is a FIFO file. Set this option to `true` if you are
+    /// sure the file is a FIFO file.
+    ///
+    /// [`open_receiver`]: OpenOptions::open_receiver
+    /// [`open_sender`]: OpenOptions::open_sender
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use nix::{unistd::mkfifo, sys::stat::Mode};
+    /// # use std::error::Error;
+    ///
+    /// // Our program has exclusive access to this path.
+    /// const FIFO_NAME: &str = "path/to/a/new/fifo";
+    ///
+    /// # async fn dox() -> Result<(), Box<dyn Error>> {
+    /// mkfifo(FIFO_NAME, Mode::S_IRWXU)?;
+    /// let rx = pipe::OpenOptions::new()
+    ///     .unchecked(true)
+    ///     .open_receiver(FIFO_NAME)?;
+    /// # Ok(())
+    /// # }
+    /// ```
+    pub fn unchecked(&mut self, value: bool) -> &mut Self {
+        self.unchecked = value;
+        self
+    }
+
+    /// Creates a [`Receiver`] from a FIFO file with the options specified by `self`.
+    ///
+    /// This function will open the FIFO file at the specified path, possibly
+    /// check if it is a pipe, and associate the pipe with the default event
+    /// loop for reading.
+    ///
+    /// # Errors
+    ///
+    /// If the file type check fails, this function will fail with `io::ErrorKind::InvalidInput`.
+    /// This function may also fail with other standard OS errors.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn open_receiver<P: AsRef<Path>>(&self, path: P) -> io::Result<Receiver> {
+        let file = self.open(path.as_ref(), PipeEnd::Receiver)?;
+        Receiver::from_file_unchecked(file)
+    }
+
+    /// Creates a [`Sender`] from a FIFO file with the options specified by `self`.
+    ///
+    /// This function will open the FIFO file at the specified path, possibly
+    /// check if it is a pipe, and associate the pipe with the default event
+    /// loop for writing.
+    ///
+    /// # Errors
+    ///
+    /// If the file type check fails, this function will fail with `io::ErrorKind::InvalidInput`.
+    /// If the file is not opened in read-write access mode and the file is not
+    /// currently open for reading, this function will fail with `ENXIO`.
+    /// This function may also fail with other standard OS errors.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn open_sender<P: AsRef<Path>>(&self, path: P) -> io::Result<Sender> {
+        let file = self.open(path.as_ref(), PipeEnd::Sender)?;
+        Sender::from_file_unchecked(file)
+    }
+
+    fn open(&self, path: &Path, pipe_end: PipeEnd) -> io::Result<File> {
+        let mut options = std::fs::OpenOptions::new();
+        options
+            .read(pipe_end == PipeEnd::Receiver)
+            .write(pipe_end == PipeEnd::Sender)
+            .custom_flags(libc::O_NONBLOCK);
+
+        #[cfg(target_os = "linux")]
+        if self.read_write {
+            options.read(true).write(true);
+        }
+
+        let file = options.open(path)?;
+
+        if !self.unchecked && !is_pipe(file.as_fd())? {
+            return Err(io::Error::new(io::ErrorKind::InvalidInput, "not a pipe"));
+        }
+
+        Ok(file)
+    }
+}
+
+impl Default for OpenOptions {
+    fn default() -> OpenOptions {
+        OpenOptions::new()
+    }
+}
+
+#[derive(Clone, Copy, PartialEq, Eq, Debug)]
+enum PipeEnd {
+    Sender,
+    Receiver,
+}
+
+/// Writing end of a Unix pipe.
+///
+/// It can be constructed from a FIFO file with [`OpenOptions::open_sender`].
+///
+/// Opening a named pipe for writing involves a few steps.
+/// Call to [`OpenOptions::open_sender`] might fail with an error indicating
+/// different things:
+///
+/// * [`io::ErrorKind::NotFound`] - There is no file at the specified path.
+/// * [`io::ErrorKind::InvalidInput`] - The file exists, but it is not a FIFO.
+/// * [`ENXIO`] - The file is a FIFO, but no process has it open for reading.
+///   Sleep for a while and try again.
+/// * Other OS errors not specific to opening FIFO files.
+///
+/// Opening a `Sender` from a FIFO file should look like this:
+///
+/// ```no_run
+/// use tokio::net::unix::pipe;
+/// use tokio::time::{self, Duration};
+///
+/// const FIFO_NAME: &str = "path/to/a/fifo";
+///
+/// # async fn dox() -> Result<(), Box<dyn std::error::Error>> {
+/// // Wait for a reader to open the file.
+/// let tx = loop {
+///     match pipe::OpenOptions::new().open_sender(FIFO_NAME) {
+///         Ok(tx) => break tx,
+///         Err(e) if e.raw_os_error() == Some(libc::ENXIO) => {},
+///         Err(e) => return Err(e.into()),
+///     }
+///
+///     time::sleep(Duration::from_millis(50)).await;
+/// };
+/// # Ok(())
+/// # }
+/// ```
+///
+/// On Linux, it is possible to create a `Sender` without waiting in a sleeping
+/// loop. This is done by opening a named pipe in read-write access mode with
+/// `OpenOptions::read_write`. This way, a `Sender` can at the same time hold
+/// both a writing end and a reading end, and the latter allows to open a FIFO
+/// without [`ENXIO`] error since the pipe is open for reading as well.
+///
+/// `Sender` cannot be used to read from a pipe, so in practice the read access
+/// is only used when a FIFO is opened. However, using a `Sender` in read-write
+/// mode **may lead to lost data**, because written data will be dropped by the
+/// system as soon as all pipe ends are closed. To avoid lost data you have to
+/// make sure that a reading end has been opened before dropping a `Sender`.
+///
+/// Note that using read-write access mode with FIFO files is not defined by
+/// the POSIX standard and it is only guaranteed to work on Linux.
+///
+/// ```ignore
+/// use tokio::io::AsyncWriteExt;
+/// use tokio::net::unix::pipe;
+///
+/// const FIFO_NAME: &str = "path/to/a/fifo";
+///
+/// # async fn dox() -> Result<(), Box<dyn std::error::Error>> {
+/// let mut tx = pipe::OpenOptions::new()
+///     .read_write(true)
+///     .open_sender(FIFO_NAME)?;
+///
+/// // Asynchronously write to the pipe before a reader.
+/// tx.write_all(b"hello world").await?;
+/// # Ok(())
+/// # }
+/// ```
+///
+/// [`ENXIO`]: https://docs.rs/libc/latest/libc/constant.ENXIO.html
+#[derive(Debug)]
+pub struct Sender {
+    io: PollEvented<mio_pipe::Sender>,
+}
+
+impl Sender {
+    fn from_mio(mio_tx: mio_pipe::Sender) -> io::Result<Sender> {
+        let io = PollEvented::new_with_interest(mio_tx, Interest::WRITABLE)?;
+        Ok(Sender { io })
+    }
+
+    /// Creates a new `Sender` from a [`File`].
+    ///
+    /// This function is intended to construct a pipe from a [`File`] representing
+    /// a special FIFO file. It will check if the file is a pipe and has write access,
+    /// set it in non-blocking mode and perform the conversion.
+    ///
+    /// # Errors
+    ///
+    /// Fails with `io::ErrorKind::InvalidInput` if the file is not a pipe or it
+    /// does not have write access. Also fails with any standard OS error if it occurs.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_file(file: File) -> io::Result<Sender> {
+        Sender::from_owned_fd(file.into())
+    }
+
+    /// Creates a new `Sender` from an [`OwnedFd`].
+    ///
+    /// This function is intended to construct a pipe from an [`OwnedFd`] representing
+    /// an anonymous pipe or a special FIFO file. It will check if the file descriptor
+    /// is a pipe and has write access, set it in non-blocking mode and perform the
+    /// conversion.
+    ///
+    /// # Errors
+    ///
+    /// Fails with `io::ErrorKind::InvalidInput` if the file descriptor is not a pipe
+    /// or it does not have write access. Also fails with any standard OS error if it
+    /// occurs.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_owned_fd(owned_fd: OwnedFd) -> io::Result<Sender> {
+        if !is_pipe(owned_fd.as_fd())? {
+            return Err(io::Error::new(io::ErrorKind::InvalidInput, "not a pipe"));
+        }
+
+        let flags = get_file_flags(owned_fd.as_fd())?;
+        if has_write_access(flags) {
+            set_nonblocking(owned_fd.as_fd(), flags)?;
+            Sender::from_owned_fd_unchecked(owned_fd)
+        } else {
+            Err(io::Error::new(
+                io::ErrorKind::InvalidInput,
+                "not in O_WRONLY or O_RDWR access mode",
+            ))
+        }
+    }
+
+    /// Creates a new `Sender` from a [`File`] without checking pipe properties.
+    ///
+    /// This function is intended to construct a pipe from a File representing
+    /// a special FIFO file. The conversion assumes nothing about the underlying
+    /// file; it is left up to the user to make sure it is opened with write access,
+    /// represents a pipe and is set in non-blocking mode.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::fs::OpenOptions;
+    /// use std::os::unix::fs::{FileTypeExt, OpenOptionsExt};
+    /// # use std::error::Error;
+    ///
+    /// const FIFO_NAME: &str = "path/to/a/fifo";
+    ///
+    /// # async fn dox() -> Result<(), Box<dyn Error>> {
+    /// let file = OpenOptions::new()
+    ///     .write(true)
+    ///     .custom_flags(libc::O_NONBLOCK)
+    ///     .open(FIFO_NAME)?;
+    /// if file.metadata()?.file_type().is_fifo() {
+    ///     let tx = pipe::Sender::from_file_unchecked(file)?;
+    ///     /* use the Sender */
+    /// }
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_file_unchecked(file: File) -> io::Result<Sender> {
+        Sender::from_owned_fd_unchecked(file.into())
+    }
+
+    /// Creates a new `Sender` from an [`OwnedFd`] without checking pipe properties.
+    ///
+    /// This function is intended to construct a pipe from an [`OwnedFd`] representing
+    /// an anonymous pipe or a special FIFO file. The conversion assumes nothing about
+    /// the underlying pipe; it is left up to the user to make sure that the file
+    /// descriptor represents the writing end of a pipe and the pipe is set in
+    /// non-blocking mode.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_owned_fd_unchecked(owned_fd: OwnedFd) -> io::Result<Sender> {
+        // Safety: OwnedFd represents a valid, open file descriptor.
+        let mio_tx = unsafe { mio_pipe::Sender::from_raw_fd(owned_fd.into_raw_fd()) };
+        Sender::from_mio(mio_tx)
+    }
+
+    /// Waits for any of the requested ready states.
+    ///
+    /// This function can be used instead of [`writable()`] to check the returned
+    /// ready set for [`Ready::WRITABLE`] and [`Ready::WRITE_CLOSED`] events.
+    ///
+    /// The function may complete without the pipe being ready. This is a
+    /// false-positive and attempting an operation will return with
+    /// `io::ErrorKind::WouldBlock`. The function can also return with an empty
+    /// [`Ready`] set, so you should always check the returned value and possibly
+    /// wait again if the requested states are not set.
+    ///
+    /// [`writable()`]: Self::writable
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. Once a readiness event occurs, the method
+    /// will continue to return immediately until the readiness event is
+    /// consumed by an attempt to write that fails with `WouldBlock` or
+    /// `Poll::Pending`.
+    pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
+        let event = self.io.registration().readiness(interest).await?;
+        Ok(event.ready)
+    }
+
+    /// Waits for the pipe to become writable.
+    ///
+    /// This function is equivalent to `ready(Interest::WRITABLE)` and is usually
+    /// paired with [`try_write()`].
+    ///
+    /// [`try_write()`]: Self::try_write
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     // Open a writing end of a fifo
+    ///     let tx = pipe::OpenOptions::new().open_sender("path/to/a/fifo")?;
+    ///
+    ///     loop {
+    ///         // Wait for the pipe to be writable
+    ///         tx.writable().await?;
+    ///
+    ///         // Try to write data, this may still fail with `WouldBlock`
+    ///         // if the readiness event is a false positive.
+    ///         match tx.try_write(b"hello world") {
+    ///             Ok(n) => {
+    ///                 break;
+    ///             }
+    ///             Err(e) if e.kind() == io::ErrorKind::WouldBlock => {
+    ///                 continue;
+    ///             }
+    ///             Err(e) => {
+    ///                 return Err(e.into());
+    ///             }
+    ///         }
+    ///     }
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub async fn writable(&self) -> io::Result<()> {
+        self.ready(Interest::WRITABLE).await?;
+        Ok(())
+    }
+
+    /// Polls for write readiness.
+    ///
+    /// If the pipe is not currently ready for writing, this method will
+    /// store a clone of the `Waker` from the provided `Context`. When the pipe
+    /// becomes ready for writing, `Waker::wake` will be called on the waker.
+    ///
+    /// Note that on multiple calls to `poll_write_ready` or `poll_write`, only
+    /// the `Waker` from the `Context` passed to the most recent call is
+    /// scheduled to receive a wakeup.
+    ///
+    /// This function is intended for cases where creating and pinning a future
+    /// via [`writable`] is not feasible. Where possible, using [`writable`] is
+    /// preferred, as this supports polling from multiple tasks at once.
+    ///
+    /// [`writable`]: Self::writable
+    ///
+    /// # Return value
+    ///
+    /// The function returns:
+    ///
+    /// * `Poll::Pending` if the pipe is not ready for writing.
+    /// * `Poll::Ready(Ok(()))` if the pipe is ready for writing.
+    /// * `Poll::Ready(Err(e))` if an error is encountered.
+    ///
+    /// # Errors
+    ///
+    /// This function may encounter any standard I/O error except `WouldBlock`.
+    pub fn poll_write_ready(&self, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
+        self.io.registration().poll_write_ready(cx).map_ok(|_| ())
+    }
+
+    /// Tries to write a buffer to the pipe, returning how many bytes were
+    /// written.
+    ///
+    /// The function will attempt to write the entire contents of `buf`, but
+    /// only part of the buffer may be written. If the length of `buf` is not
+    /// greater than `PIPE_BUF` (an OS constant, 4096 under Linux), then the
+    /// write is guaranteed to be atomic, i.e. either the entire content of
+    /// `buf` will be written or this method will fail with `WouldBlock`. There
+    /// is no such guarantee if `buf` is larger than `PIPE_BUF`.
+    ///
+    /// This function is usually paired with [`writable`].
+    ///
+    /// [`writable`]: Self::writable
+    ///
+    /// # Return
+    ///
+    /// If data is successfully written, `Ok(n)` is returned, where `n` is the
+    /// number of bytes written. If the pipe is not ready to write data,
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     // Open a writing end of a fifo
+    ///     let tx = pipe::OpenOptions::new().open_sender("path/to/a/fifo")?;
+    ///
+    ///     loop {
+    ///         // Wait for the pipe to be writable
+    ///         tx.writable().await?;
+    ///
+    ///         // Try to write data, this may still fail with `WouldBlock`
+    ///         // if the readiness event is a false positive.
+    ///         match tx.try_write(b"hello world") {
+    ///             Ok(n) => {
+    ///                 break;
+    ///             }
+    ///             Err(e) if e.kind() == io::ErrorKind::WouldBlock => {
+    ///                 continue;
+    ///             }
+    ///             Err(e) => {
+    ///                 return Err(e.into());
+    ///             }
+    ///         }
+    ///     }
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn try_write(&self, buf: &[u8]) -> io::Result<usize> {
+        self.io
+            .registration()
+            .try_io(Interest::WRITABLE, || (&*self.io).write(buf))
+    }
+
+    /// Tries to write several buffers to the pipe, returning how many bytes
+    /// were written.
+    ///
+    /// Data is written from each buffer in order, with the final buffer read
+    /// from possible being only partially consumed. This method behaves
+    /// equivalently to a single call to [`try_write()`] with concatenated
+    /// buffers.
+    ///
+    /// If the total length of buffers is not greater than `PIPE_BUF` (an OS
+    /// constant, 4096 under Linux), then the write is guaranteed to be atomic,
+    /// i.e. either the entire contents of buffers will be written or this
+    /// method will fail with `WouldBlock`. There is no such guarantee if the
+    /// total length of buffers is greater than `PIPE_BUF`.
+    ///
+    /// This function is usually paired with [`writable`].
+    ///
+    /// [`try_write()`]: Self::try_write()
+    /// [`writable`]: Self::writable
+    ///
+    /// # Return
+    ///
+    /// If data is successfully written, `Ok(n)` is returned, where `n` is the
+    /// number of bytes written. If the pipe is not ready to write data,
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     // Open a writing end of a fifo
+    ///     let tx = pipe::OpenOptions::new().open_sender("path/to/a/fifo")?;
+    ///
+    ///     let bufs = [io::IoSlice::new(b"hello "), io::IoSlice::new(b"world")];
+    ///
+    ///     loop {
+    ///         // Wait for the pipe to be writable
+    ///         tx.writable().await?;
+    ///
+    ///         // Try to write data, this may still fail with `WouldBlock`
+    ///         // if the readiness event is a false positive.
+    ///         match tx.try_write_vectored(&bufs) {
+    ///             Ok(n) => {
+    ///                 break;
+    ///             }
+    ///             Err(ref e) if e.kind() == io::ErrorKind::WouldBlock => {
+    ///                 continue;
+    ///             }
+    ///             Err(e) => {
+    ///                 return Err(e.into());
+    ///             }
+    ///         }
+    ///     }
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn try_write_vectored(&self, buf: &[io::IoSlice<'_>]) -> io::Result<usize> {
+        self.io
+            .registration()
+            .try_io(Interest::WRITABLE, || (&*self.io).write_vectored(buf))
+    }
+
+    /// Converts the pipe into an [`OwnedFd`] in blocking mode.
+    ///
+    /// This function will deregister this pipe end from the event loop, set
+    /// it in blocking mode and perform the conversion.
+    pub fn into_blocking_fd(self) -> io::Result<OwnedFd> {
+        let fd = self.into_nonblocking_fd()?;
+        set_blocking(&fd)?;
+        Ok(fd)
+    }
+
+    /// Converts the pipe into an [`OwnedFd`] in nonblocking mode.
+    ///
+    /// This function will deregister this pipe end from the event loop and
+    /// perform the conversion. The returned file descriptor will be in nonblocking
+    /// mode.
+    pub fn into_nonblocking_fd(self) -> io::Result<OwnedFd> {
+        let mio_pipe = self.io.into_inner()?;
+
+        // Safety: the pipe is now deregistered from the event loop
+        // and we are the only owner of this pipe end.
+        let owned_fd = unsafe { OwnedFd::from_raw_fd(mio_pipe.into_raw_fd()) };
+
+        Ok(owned_fd)
+    }
+}
+
+impl AsyncWrite for Sender {
+    fn poll_write(
+        self: Pin<&mut Self>,
+        cx: &mut Context<'_>,
+        buf: &[u8],
+    ) -> Poll<io::Result<usize>> {
+        self.io.poll_write(cx, buf)
+    }
+
+    fn poll_write_vectored(
+        self: Pin<&mut Self>,
+        cx: &mut Context<'_>,
+        bufs: &[io::IoSlice<'_>],
+    ) -> Poll<io::Result<usize>> {
+        self.io.poll_write_vectored(cx, bufs)
+    }
+
+    fn is_write_vectored(&self) -> bool {
+        true
+    }
+
+    fn poll_flush(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
+        Poll::Ready(Ok(()))
+    }
+
+    fn poll_shutdown(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
+        Poll::Ready(Ok(()))
+    }
+}
+
+impl AsRawFd for Sender {
+    fn as_raw_fd(&self) -> RawFd {
+        self.io.as_raw_fd()
+    }
+}
+
+impl AsFd for Sender {
+    fn as_fd(&self) -> BorrowedFd<'_> {
+        unsafe { BorrowedFd::borrow_raw(self.as_raw_fd()) }
+    }
+}
+
+/// Reading end of a Unix pipe.
+///
+/// It can be constructed from a FIFO file with [`OpenOptions::open_receiver`].
+///
+/// # Examples
+///
+/// Receiving messages from a named pipe in a loop:
+///
+/// ```no_run
+/// use tokio::net::unix::pipe;
+/// use tokio::io::{self, AsyncReadExt};
+///
+/// const FIFO_NAME: &str = "path/to/a/fifo";
+///
+/// # async fn dox() -> Result<(), Box<dyn std::error::Error>> {
+/// let mut rx = pipe::OpenOptions::new().open_receiver(FIFO_NAME)?;
+/// loop {
+///     let mut msg = vec![0; 256];
+///     match rx.read_exact(&mut msg).await {
+///         Ok(_) => {
+///             /* handle the message */
+///         }
+///         Err(e) if e.kind() == io::ErrorKind::UnexpectedEof => {
+///             // Writing end has been closed, we should reopen the pipe.
+///             rx = pipe::OpenOptions::new().open_receiver(FIFO_NAME)?;
+///         }
+///         Err(e) => return Err(e.into()),
+///     }
+/// }
+/// # }
+/// ```
+///
+/// On Linux, you can use a `Receiver` in read-write access mode to implement
+/// resilient reading from a named pipe. Unlike `Receiver` opened in read-only
+/// mode, read from a pipe in read-write mode will not fail with `UnexpectedEof`
+/// when the writing end is closed. This way, a `Receiver` can asynchronously
+/// wait for the next writer to open the pipe.
+///
+/// You should not use functions waiting for EOF such as [`read_to_end`] with
+/// a `Receiver` in read-write access mode, since it **may wait forever**.
+/// `Receiver` in this mode also holds an open writing end, which prevents
+/// receiving EOF.
+///
+/// To set the read-write access mode you can use `OpenOptions::read_write`.
+/// Note that using read-write access mode with FIFO files is not defined by
+/// the POSIX standard and it is only guaranteed to work on Linux.
+///
+/// ```ignore
+/// use tokio::net::unix::pipe;
+/// use tokio::io::AsyncReadExt;
+/// # use std::error::Error;
+///
+/// const FIFO_NAME: &str = "path/to/a/fifo";
+///
+/// # async fn dox() -> Result<(), Box<dyn Error>> {
+/// let mut rx = pipe::OpenOptions::new()
+///     .read_write(true)
+///     .open_receiver(FIFO_NAME)?;
+/// loop {
+///     let mut msg = vec![0; 256];
+///     rx.read_exact(&mut msg).await?;
+///     /* handle the message */
+/// }
+/// # }
+/// ```
+///
+/// [`read_to_end`]: crate::io::AsyncReadExt::read_to_end
+#[derive(Debug)]
+pub struct Receiver {
+    io: PollEvented<mio_pipe::Receiver>,
+}
+
+impl Receiver {
+    fn from_mio(mio_rx: mio_pipe::Receiver) -> io::Result<Receiver> {
+        let io = PollEvented::new_with_interest(mio_rx, Interest::READABLE)?;
+        Ok(Receiver { io })
+    }
+
+    /// Creates a new `Receiver` from a [`File`].
+    ///
+    /// This function is intended to construct a pipe from a [`File`] representing
+    /// a special FIFO file. It will check if the file is a pipe and has read access,
+    /// set it in non-blocking mode and perform the conversion.
+    ///
+    /// # Errors
+    ///
+    /// Fails with `io::ErrorKind::InvalidInput` if the file is not a pipe or it
+    /// does not have read access. Also fails with any standard OS error if it occurs.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_file(file: File) -> io::Result<Receiver> {
+        Receiver::from_owned_fd(file.into())
+    }
+
+    /// Creates a new `Receiver` from an [`OwnedFd`].
+    ///
+    /// This function is intended to construct a pipe from an [`OwnedFd`] representing
+    /// an anonymous pipe or a special FIFO file. It will check if the file descriptor
+    /// is a pipe and has read access, set it in non-blocking mode and perform the
+    /// conversion.
+    ///
+    /// # Errors
+    ///
+    /// Fails with `io::ErrorKind::InvalidInput` if the file descriptor is not a pipe
+    /// or it does not have read access. Also fails with any standard OS error if it
+    /// occurs.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_owned_fd(owned_fd: OwnedFd) -> io::Result<Receiver> {
+        if !is_pipe(owned_fd.as_fd())? {
+            return Err(io::Error::new(io::ErrorKind::InvalidInput, "not a pipe"));
+        }
+
+        let flags = get_file_flags(owned_fd.as_fd())?;
+        if has_read_access(flags) {
+            set_nonblocking(owned_fd.as_fd(), flags)?;
+            Receiver::from_owned_fd_unchecked(owned_fd)
+        } else {
+            Err(io::Error::new(
+                io::ErrorKind::InvalidInput,
+                "not in O_RDONLY or O_RDWR access mode",
+            ))
+        }
+    }
+
+    /// Creates a new `Receiver` from a [`File`] without checking pipe properties.
+    ///
+    /// This function is intended to construct a pipe from a File representing
+    /// a special FIFO file. The conversion assumes nothing about the underlying
+    /// file; it is left up to the user to make sure it is opened with read access,
+    /// represents a pipe and is set in non-blocking mode.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::fs::OpenOptions;
+    /// use std::os::unix::fs::{FileTypeExt, OpenOptionsExt};
+    /// # use std::error::Error;
+    ///
+    /// const FIFO_NAME: &str = "path/to/a/fifo";
+    ///
+    /// # async fn dox() -> Result<(), Box<dyn Error>> {
+    /// let file = OpenOptions::new()
+    ///     .read(true)
+    ///     .custom_flags(libc::O_NONBLOCK)
+    ///     .open(FIFO_NAME)?;
+    /// if file.metadata()?.file_type().is_fifo() {
+    ///     let rx = pipe::Receiver::from_file_unchecked(file)?;
+    ///     /* use the Receiver */
+    /// }
+    /// # Ok(())
+    /// # }
+    /// ```
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_file_unchecked(file: File) -> io::Result<Receiver> {
+        Receiver::from_owned_fd_unchecked(file.into())
+    }
+
+    /// Creates a new `Receiver` from an [`OwnedFd`] without checking pipe properties.
+    ///
+    /// This function is intended to construct a pipe from an [`OwnedFd`] representing
+    /// an anonymous pipe or a special FIFO file. The conversion assumes nothing about
+    /// the underlying pipe; it is left up to the user to make sure that the file
+    /// descriptor represents the reading end of a pipe and the pipe is set in
+    /// non-blocking mode.
+    ///
+    /// # Panics
+    ///
+    /// This function panics if it is not called from within a runtime with
+    /// IO enabled.
+    ///
+    /// The runtime is usually set implicitly when this function is called
+    /// from a future driven by a tokio runtime, otherwise runtime can be set
+    /// explicitly with [`Runtime::enter`](crate::runtime::Runtime::enter) function.
+    pub fn from_owned_fd_unchecked(owned_fd: OwnedFd) -> io::Result<Receiver> {
+        // Safety: OwnedFd represents a valid, open file descriptor.
+        let mio_rx = unsafe { mio_pipe::Receiver::from_raw_fd(owned_fd.into_raw_fd()) };
+        Receiver::from_mio(mio_rx)
+    }
+
+    /// Waits for any of the requested ready states.
+    ///
+    /// This function can be used instead of [`readable()`] to check the returned
+    /// ready set for [`Ready::READABLE`] and [`Ready::READ_CLOSED`] events.
+    ///
+    /// The function may complete without the pipe being ready. This is a
+    /// false-positive and attempting an operation will return with
+    /// `io::ErrorKind::WouldBlock`. The function can also return with an empty
+    /// [`Ready`] set, so you should always check the returned value and possibly
+    /// wait again if the requested states are not set.
+    ///
+    /// [`readable()`]: Self::readable
+    ///
+    /// # Cancel safety
+    ///
+    /// This method is cancel safe. Once a readiness event occurs, the method
+    /// will continue to return immediately until the readiness event is
+    /// consumed by an attempt to read that fails with `WouldBlock` or
+    /// `Poll::Pending`.
+    pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
+        let event = self.io.registration().readiness(interest).await?;
+        Ok(event.ready)
+    }
+
+    /// Waits for the pipe to become readable.
+    ///
+    /// This function is equivalent to `ready(Interest::READABLE)` and is usually
+    /// paired with [`try_read()`].
+    ///
+    /// [`try_read()`]: Self::try_read()
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     // Open a reading end of a fifo
+    ///     let rx = pipe::OpenOptions::new().open_receiver("path/to/a/fifo")?;
+    ///
+    ///     let mut msg = vec![0; 1024];
+    ///
+    ///     loop {
+    ///         // Wait for the pipe to be readable
+    ///         rx.readable().await?;
+    ///
+    ///         // Try to read data, this may still fail with `WouldBlock`
+    ///         // if the readiness event is a false positive.
+    ///         match rx.try_read(&mut msg) {
+    ///             Ok(n) => {
+    ///                 msg.truncate(n);
+    ///                 break;
+    ///             }
+    ///             Err(e) if e.kind() == io::ErrorKind::WouldBlock => {
+    ///                 continue;
+    ///             }
+    ///             Err(e) => {
+    ///                 return Err(e.into());
+    ///             }
+    ///         }
+    ///     }
+    ///
+    ///     println!("GOT = {:?}", msg);
+    ///     Ok(())
+    /// }
+    /// ```
+    pub async fn readable(&self) -> io::Result<()> {
+        self.ready(Interest::READABLE).await?;
+        Ok(())
+    }
+
+    /// Polls for read readiness.
+    ///
+    /// If the pipe is not currently ready for reading, this method will
+    /// store a clone of the `Waker` from the provided `Context`. When the pipe
+    /// becomes ready for reading, `Waker::wake` will be called on the waker.
+    ///
+    /// Note that on multiple calls to `poll_read_ready` or `poll_read`, only
+    /// the `Waker` from the `Context` passed to the most recent call is
+    /// scheduled to receive a wakeup.
+    ///
+    /// This function is intended for cases where creating and pinning a future
+    /// via [`readable`] is not feasible. Where possible, using [`readable`] is
+    /// preferred, as this supports polling from multiple tasks at once.
+    ///
+    /// [`readable`]: Self::readable
+    ///
+    /// # Return value
+    ///
+    /// The function returns:
+    ///
+    /// * `Poll::Pending` if the pipe is not ready for reading.
+    /// * `Poll::Ready(Ok(()))` if the pipe is ready for reading.
+    /// * `Poll::Ready(Err(e))` if an error is encountered.
+    ///
+    /// # Errors
+    ///
+    /// This function may encounter any standard I/O error except `WouldBlock`.
+    pub fn poll_read_ready(&self, cx: &mut Context<'_>) -> Poll<io::Result<()>> {
+        self.io.registration().poll_read_ready(cx).map_ok(|_| ())
+    }
+
+    /// Tries to read data from the pipe into the provided buffer, returning how
+    /// many bytes were read.
+    ///
+    /// Reads any pending data from the pipe but does not wait for new data
+    /// to arrive. On success, returns the number of bytes read. Because
+    /// `try_read()` is non-blocking, the buffer does not have to be stored by
+    /// the async task and can exist entirely on the stack.
+    ///
+    /// Usually [`readable()`] is used with this function.
+    ///
+    /// [`readable()`]: Self::readable()
+    ///
+    /// # Return
+    ///
+    /// If data is successfully read, `Ok(n)` is returned, where `n` is the
+    /// number of bytes read. If `n` is `0`, then it can indicate one of two scenarios:
+    ///
+    /// 1. The pipe's writing end is closed and will no longer write data.
+    /// 2. The specified buffer was 0 bytes in length.
+    ///
+    /// If the pipe is not ready to read data,
+    /// `Err(io::ErrorKind::WouldBlock)` is returned.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     // Open a reading end of a fifo
+    ///     let rx = pipe::OpenOptions::new().open_receiver("path/to/a/fifo")?;
+    ///
+    ///     let mut msg = vec![0; 1024];
+    ///
+    ///     loop {
+    ///         // Wait for the pipe to be readable
+    ///         rx.readable().await?;
+    ///
+    ///         // Try to read data, this may still fail with `WouldBlock`
+    ///         // if the readiness event is a false positive.
+    ///         match rx.try_read(&mut msg) {
+    ///             Ok(n) => {
+    ///                 msg.truncate(n);
+    ///                 break;
+    ///             }
+    ///             Err(e) if e.kind() == io::ErrorKind::WouldBlock => {
+    ///                 continue;
+    ///             }
+    ///             Err(e) => {
+    ///                 return Err(e.into());
+    ///             }
+    ///         }
+    ///     }
+    ///
+    ///     println!("GOT = {:?}", msg);
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn try_read(&self, buf: &mut [u8]) -> io::Result<usize> {
+        self.io
+            .registration()
+            .try_io(Interest::READABLE, || (&*self.io).read(buf))
+    }
+
+    /// Tries to read data from the pipe into the provided buffers, returning
+    /// how many bytes were read.
+    ///
+    /// Data is copied to fill each buffer in order, with the final buffer
+    /// written to possibly being only partially filled. This method behaves
+    /// equivalently to a single call to [`try_read()`] with concatenated
+    /// buffers.
+    ///
+    /// Reads any pending data from the pipe but does not wait for new data
+    /// to arrive. On success, returns the number of bytes read. Because
+    /// `try_read_vectored()` is non-blocking, the buffer does not have to be
+    /// stored by the async task and can exist entirely on the stack.
+    ///
+    /// Usually, [`readable()`] is used with this function.
+    ///
+    /// [`try_read()`]: Self::try_read()
+    /// [`readable()`]: Self::readable()
+    ///
+    /// # Return
+    ///
+    /// If data is successfully read, `Ok(n)` is returned, where `n` is the
+    /// number of bytes read. `Ok(0)` indicates the pipe's writing end is
+    /// closed and will no longer write data. If the pipe is not ready to read
+    /// data `Err(io::ErrorKind::WouldBlock)` is returned.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use tokio::net::unix::pipe;
+    /// use std::io;
+    ///
+    /// #[tokio::main]
+    /// async fn main() -> io::Result<()> {
+    ///     // Open a reading end of a fifo
+    ///     let rx = pipe::OpenOptions::new().open_receiver("path/to/a/fifo")?;
+    ///
+    ///     loop {
+    ///         // Wait for the pipe to be readable
+    ///         rx.readable().await?;
+    ///
+    ///         // Creating the buffer **after** the `await` prevents it from
+    ///         // being stored in the async task.
+    ///         let mut buf_a = [0; 512];
+    ///         let mut buf_b = [0; 1024];
+    ///         let mut bufs = [
+    ///             io::IoSliceMut::new(&mut buf_a),
+    ///             io::IoSliceMut::new(&mut buf_b),
+    ///         ];
+    ///
+    ///         // Try to read data, this may still fail with `WouldBlock`
+    ///         // if the readiness event is a false positive.
+    ///         match rx.try_read_vectored(&mut bufs) {
+    ///             Ok(0) => break,
+    ///             Ok(n) => {
+    ///                 println!("read {} bytes", n);
+    ///             }
+    ///             Err(e) if e.kind() == io::ErrorKind::WouldBlock => {
+    ///                 continue;
+    ///             }
+    ///             Err(e) => {
+    ///                 return Err(e.into());
+    ///             }
+    ///         }
+    ///     }
+    ///
+    ///     Ok(())
+    /// }
+    /// ```
+    pub fn try_read_vectored(&self, bufs: &mut [io::IoSliceMut<'_>]) -> io::Result<usize> {
+        self.io
+            .registration()
+            .try_io(Interest::READABLE, || (&*self.io).read_vectored(bufs))
+    }
+
+    cfg_io_util! {
+        /// Tries to read data from the pipe into the provided buffer, advancing the
+        /// buffer's internal cursor, returning how many bytes were read.
+        ///
+        /// Reads any pending data from the pipe but does not wait for new data
+        /// to arrive. On success, returns the number of bytes read. Because
+        /// `try_read_buf()` is non-blocking, the buffer does not have to be stored by
+        /// the async task and can exist entirely on the stack.
+        ///
+        /// Usually, [`readable()`] or [`ready()`] is used with this function.
+        ///
+        /// [`readable()`]: Self::readable
+        /// [`ready()`]: Self::ready
+        ///
+        /// # Return
+        ///
+        /// If data is successfully read, `Ok(n)` is returned, where `n` is the
+        /// number of bytes read. `Ok(0)` indicates the pipe's writing end is
+        /// closed and will no longer write data. If the pipe is not ready to read
+        /// data `Err(io::ErrorKind::WouldBlock)` is returned.
+        ///
+        /// # Examples
+        ///
+        /// ```no_run
+        /// use tokio::net::unix::pipe;
+        /// use std::io;
+        ///
+        /// #[tokio::main]
+        /// async fn main() -> io::Result<()> {
+        ///     // Open a reading end of a fifo
+        ///     let rx = pipe::OpenOptions::new().open_receiver("path/to/a/fifo")?;
+        ///
+        ///     loop {
+        ///         // Wait for the pipe to be readable
+        ///         rx.readable().await?;
+        ///
+        ///         let mut buf = Vec::with_capacity(4096);
+        ///
+        ///         // Try to read data, this may still fail with `WouldBlock`
+        ///         // if the readiness event is a false positive.
+        ///         match rx.try_read_buf(&mut buf) {
+        ///             Ok(0) => break,
+        ///             Ok(n) => {
+        ///                 println!("read {} bytes", n);
+        ///             }
+        ///             Err(ref e) if e.kind() == io::ErrorKind::WouldBlock => {
+        ///                 continue;
+        ///             }
+        ///             Err(e) => {
+        ///                 return Err(e.into());
+        ///             }
+        ///         }
+        ///     }
+        ///
+        ///     Ok(())
+        /// }
+        /// ```
+        pub fn try_read_buf<B: BufMut>(&self, buf: &mut B) -> io::Result<usize> {
+            self.io.registration().try_io(Interest::READABLE, || {
+                use std::io::Read;
+
+                let dst = buf.chunk_mut();
+                let dst =
+                    unsafe { &mut *(dst as *mut _ as *mut [std::mem::MaybeUninit<u8>] as *mut [u8]) };
+
+                // Safety: `mio_pipe::Receiver` uses a `std::fs::File` underneath,
+                // which correctly handles reads into uninitialized memory.
+                let n = (&*self.io).read(dst)?;
+
+                unsafe {
+                    buf.advance_mut(n);
+                }
+
+                Ok(n)
+            })
+        }
+    }
+
+    /// Converts the pipe into an [`OwnedFd`] in blocking mode.
+    ///
+    /// This function will deregister this pipe end from the event loop, set
+    /// it in blocking mode and perform the conversion.
+    pub fn into_blocking_fd(self) -> io::Result<OwnedFd> {
+        let fd = self.into_nonblocking_fd()?;
+        set_blocking(&fd)?;
+        Ok(fd)
+    }
+
+    /// Converts the pipe into an [`OwnedFd`] in nonblocking mode.
+    ///
+    /// This function will deregister this pipe end from the event loop and
+    /// perform the conversion. Returned file descriptor will be in nonblocking
+    /// mode.
+    pub fn into_nonblocking_fd(self) -> io::Result<OwnedFd> {
+        let mio_pipe = self.io.into_inner()?;
+
+        // Safety: the pipe is now deregistered from the event loop
+        // and we are the only owner of this pipe end.
+        let owned_fd = unsafe { OwnedFd::from_raw_fd(mio_pipe.into_raw_fd()) };
+
+        Ok(owned_fd)
+    }
+}
+
+impl AsyncRead for Receiver {
+    fn poll_read(
+        self: Pin<&mut Self>,
+        cx: &mut Context<'_>,
+        buf: &mut ReadBuf<'_>,
+    ) -> Poll<io::Result<()>> {
+        // Safety: `mio_pipe::Receiver` uses a `std::fs::File` underneath,
+        // which correctly handles reads into uninitialized memory.
+        unsafe { self.io.poll_read(cx, buf) }
+    }
+}
+
+impl AsRawFd for Receiver {
+    fn as_raw_fd(&self) -> RawFd {
+        self.io.as_raw_fd()
+    }
+}
+
+impl AsFd for Receiver {
+    fn as_fd(&self) -> BorrowedFd<'_> {
+        unsafe { BorrowedFd::borrow_raw(self.as_raw_fd()) }
+    }
+}
+
+/// Checks if the file descriptor is a pipe or a FIFO.
+fn is_pipe(fd: BorrowedFd<'_>) -> io::Result<bool> {
+    // Safety: `libc::stat` is C-like struct used for syscalls and all-zero
+    // byte pattern forms a valid value.
+    let mut stat: libc::stat = unsafe { std::mem::zeroed() };
+
+    // Safety: it's safe to call `fstat` with a valid, open file descriptor
+    // and a valid pointer to a `stat` struct.
+    let r = unsafe { libc::fstat(fd.as_raw_fd(), &mut stat) };
+
+    if r == -1 {
+        Err(io::Error::last_os_error())
+    } else {
+        Ok((stat.st_mode as libc::mode_t & libc::S_IFMT) == libc::S_IFIFO)
+    }
+}
+
+/// Gets file descriptor's flags by fcntl.
+fn get_file_flags(fd: BorrowedFd<'_>) -> io::Result<libc::c_int> {
+    // Safety: it's safe to use `fcntl` to read flags of a valid, open file descriptor.
+    let flags = unsafe { libc::fcntl(fd.as_raw_fd(), libc::F_GETFL) };
+    if flags < 0 {
+        Err(io::Error::last_os_error())
+    } else {
+        Ok(flags)
+    }
+}
+
+/// Checks for `O_RDONLY` or `O_RDWR` access mode.
+fn has_read_access(flags: libc::c_int) -> bool {
+    let mode = flags & libc::O_ACCMODE;
+    mode == libc::O_RDONLY || mode == libc::O_RDWR
+}
+
+/// Checks for `O_WRONLY` or `O_RDWR` access mode.
+fn has_write_access(flags: libc::c_int) -> bool {
+    let mode = flags & libc::O_ACCMODE;
+    mode == libc::O_WRONLY || mode == libc::O_RDWR
+}
+
+/// Sets file descriptor's flags with `O_NONBLOCK` by fcntl.
+fn set_nonblocking(fd: BorrowedFd<'_>, current_flags: libc::c_int) -> io::Result<()> {
+    let flags = current_flags | libc::O_NONBLOCK;
+
+    if flags != current_flags {
+        // Safety: it's safe to use `fcntl` to set the `O_NONBLOCK` flag of a valid,
+        // open file descriptor.
+        let ret = unsafe { libc::fcntl(fd.as_raw_fd(), libc::F_SETFL, flags) };
+        if ret < 0 {
+            return Err(io::Error::last_os_error());
+        }
+    }
+
+    Ok(())
+}
+
+/// Removes `O_NONBLOCK` from fd's flags.
+fn set_blocking<T: AsRawFd>(fd: &T) -> io::Result<()> {
+    // Safety: it's safe to use `fcntl` to read flags of a valid, open file descriptor.
+    let previous = unsafe { libc::fcntl(fd.as_raw_fd(), libc::F_GETFL) };
+    if previous == -1 {
+        return Err(io::Error::last_os_error());
+    }
+
+    let new = previous & !libc::O_NONBLOCK;
+
+    // Safety: it's safe to use `fcntl` to unset the `O_NONBLOCK` flag of a valid,
+    // open file descriptor.
+    let r = unsafe { libc::fcntl(fd.as_raw_fd(), libc::F_SETFL, new) };
+    if r == -1 {
+        Err(io::Error::last_os_error())
+    } else {
+        Ok(())
+    }
+}