wasmtime 17.0.0 → 18.0.3

data/ext/cargo-vendor/tokio-1.35.1/src/runtime/scheduler/multi_thread_alt/worker.rs

@@ -1,1597 +0,0 @@
-//! A scheduler is initialized with a fixed number of workers. Each worker is
-//! driven by a thread. Each worker has a "core" which contains data such as the
-//! run queue and other state. When `block_in_place` is called, the worker's
-//! "core" is handed off to a new thread allowing the scheduler to continue to
-//! make progress while the originating thread blocks.
-//!
-//! # Shutdown
-//!
-//! Shutting down the runtime involves the following steps:
-//!
-//!  1. The Shared::close method is called. This closes the inject queue and
-//!     OwnedTasks instance and wakes up all worker threads.
-//!
-//!  2. Each worker thread observes the close signal next time it runs
-//!     Core::maintenance by checking whether the inject queue is closed.
-//!     The Core::is_shutdown flag is set to true.
-//!
-//!  3. The worker thread calls `pre_shutdown` in parallel. Here, the worker
-//!     will keep removing tasks from OwnedTasks until it is empty. No new
-//!     tasks can be pushed to the OwnedTasks during or after this step as it
-//!     was closed in step 1.
-//!
-//!  5. The workers call Shared::shutdown to enter the single-threaded phase of
-//!     shutdown. These calls will push their core to Shared::shutdown_cores,
-//!     and the last thread to push its core will finish the shutdown procedure.
-//!
-//!  6. The local run queue of each core is emptied, then the inject queue is
-//!     emptied.
-//!
-//! At this point, shutdown has completed. It is not possible for any of the
-//! collections to contain any tasks at this point, as each collection was
-//! closed first, then emptied afterwards.
-//!
-//! ## Spawns during shutdown
-//!
-//! When spawning tasks during shutdown, there are two cases:
-//!
-//!  * The spawner observes the OwnedTasks being open, and the inject queue is
-//!    closed.
-//!  * The spawner observes the OwnedTasks being closed and doesn't check the
-//!    inject queue.
-//!
-//! The first case can only happen if the OwnedTasks::bind call happens before
-//! or during step 1 of shutdown. In this case, the runtime will clean up the
-//! task in step 3 of shutdown.
-//!
-//! In the latter case, the task was not spawned and the task is immediately
-//! cancelled by the spawner.
-//!
-//! The correctness of shutdown requires both the inject queue and OwnedTasks
-//! collection to have a closed bit. With a close bit on only the inject queue,
-//! spawning could run in to a situation where a task is successfully bound long
-//! after the runtime has shut down. With a close bit on only the OwnedTasks,
-//! the first spawning situation could result in the notification being pushed
-//! to the inject queue after step 6 of shutdown, which would leave a task in
-//! the inject queue indefinitely. This would be a ref-count cycle and a memory
-//! leak.
-
-use crate::loom::sync::{Arc, Condvar, Mutex, MutexGuard};
-use crate::runtime;
-use crate::runtime::context;
-use crate::runtime::driver::Driver;
-use crate::runtime::scheduler::multi_thread_alt::{
-    idle, queue, stats, Counters, Handle, Idle, Overflow, Stats, TraceStatus,
-};
-use crate::runtime::scheduler::{self, inject, Lock};
-use crate::runtime::task::OwnedTasks;
-use crate::runtime::{blocking, coop, driver, task, Config, SchedulerMetrics, WorkerMetrics};
-use crate::util::atomic_cell::AtomicCell;
-use crate::util::rand::{FastRand, RngSeedGenerator};
-
-use std::cell::{Cell, RefCell};
-use std::cmp;
-use std::task::Waker;
-use std::time::Duration;
-
-cfg_metrics! {
-    mod metrics;
-}
-
-mod taskdump_mock;
-
-/// A scheduler worker
-///
-/// Data is stack-allocated and never migrates threads
-pub(super) struct Worker {
-    /// Used to schedule bookkeeping tasks every so often.
-    tick: u32,
-
-    /// True if the scheduler is being shutdown
-    pub(super) is_shutdown: bool,
-
-    /// True if the scheduler is being traced
-    is_traced: bool,
-
-    /// Counter used to track when to poll from the local queue vs. the
-    /// injection queue
-    num_seq_local_queue_polls: u32,
-
-    /// How often to check the global queue
-    global_queue_interval: u32,
-
-    /// Used to collect a list of workers to notify
-    workers_to_notify: Vec<usize>,
-
-    /// Snapshot of idle core list. This helps speedup stealing
-    idle_snapshot: idle::Snapshot,
-
-    stats: stats::Ephemeral,
-}
-
-/// Core data
-///
-/// Data is heap-allocated and migrates threads.
-#[repr(align(128))]
-pub(super) struct Core {
-    /// Index holding this core's remote/shared state.
-    pub(super) index: usize,
-
-    lifo_slot: Option<Notified>,
-
-    /// The worker-local run queue.
-    run_queue: queue::Local<Arc<Handle>>,
-
-    /// True if the worker is currently searching for more work. Searching
-    /// involves attempting to steal from other workers.
-    pub(super) is_searching: bool,
-
-    /// Per-worker runtime stats
-    stats: Stats,
-
-    /// Fast random number generator.
-    rand: FastRand,
-}
-
-/// State shared across all workers
-pub(crate) struct Shared {
-    /// Per-core remote state.
-    remotes: Box<[Remote]>,
-
-    /// Global task queue used for:
-    ///  1. Submit work to the scheduler while **not** currently on a worker thread.
-    ///  2. Submit work to the scheduler when a worker run queue is saturated
-    pub(super) inject: inject::Shared<Arc<Handle>>,
-
-    /// Coordinates idle workers
-    idle: Idle,
-
-    /// Collection of all active tasks spawned onto this executor.
-    pub(super) owned: OwnedTasks<Arc<Handle>>,
-
-    /// Data synchronized by the scheduler mutex
-    pub(super) synced: Mutex<Synced>,
-
-    /// Power's Tokio's I/O, timers, etc... the responsibility of polling the
-    /// driver is shared across workers.
-    driver: AtomicCell<Driver>,
-
-    /// Condition variables used to unblock worker threads. Each worker thread
-    /// has its own condvar it waits on.
-    pub(super) condvars: Vec<Condvar>,
-
-    /// The number of cores that have observed the trace signal.
-    pub(super) trace_status: TraceStatus,
-
-    /// Scheduler configuration options
-    config: Config,
-
-    /// Collects metrics from the runtime.
-    pub(super) scheduler_metrics: SchedulerMetrics,
-
-    pub(super) worker_metrics: Box<[WorkerMetrics]>,
-
-    /// Only held to trigger some code on drop. This is used to get internal
-    /// runtime metrics that can be useful when doing performance
-    /// investigations. This does nothing (empty struct, no drop impl) unless
-    /// the `tokio_internal_mt_counters` cfg flag is set.
-    _counters: Counters,
-}
-
-/// Data synchronized by the scheduler mutex
-pub(crate) struct Synced {
-    /// When worker is notified, it is assigned a core. The core is placed here
-    /// until the worker wakes up to take it.
-    pub(super) assigned_cores: Vec<Option<Box<Core>>>,
-
-    /// Cores that have observed the shutdown signal
-    ///
-    /// The core is **not** placed back in the worker to avoid it from being
-    /// stolen by a thread that was spawned as part of `block_in_place`.
-    shutdown_cores: Vec<Box<Core>>,
-
-    /// The driver goes here when shutting down
-    shutdown_driver: Option<Box<Driver>>,
-
-    /// Synchronized state for `Idle`.
-    pub(super) idle: idle::Synced,
-
-    /// Synchronized state for `Inject`.
-    pub(crate) inject: inject::Synced,
-}
-
-/// Used to communicate with a worker from other threads.
-struct Remote {
-    /// When a task is scheduled from a worker, it is stored in this slot. The
-    /// worker will check this slot for a task **before** checking the run
-    /// queue. This effectively results in the **last** scheduled task to be run
-    /// next (LIFO). This is an optimization for improving locality which
-    /// benefits message passing patterns and helps to reduce latency.
-    // lifo_slot: Lifo,
-
-    /// Steals tasks from this worker.
-    pub(super) steal: queue::Steal<Arc<Handle>>,
-}
-
-/// Thread-local context
-pub(crate) struct Context {
-    // Current scheduler's handle
-    handle: Arc<Handle>,
-
-    /// Worker index
-    index: usize,
-
-    /// True when the LIFO slot is enabled
-    lifo_enabled: Cell<bool>,
-
-    /// Core data
-    core: RefCell<Option<Box<Core>>>,
-
-    /// Used to pass cores to other threads when `block_in_place` is called
-    handoff_core: Arc<AtomicCell<Core>>,
-
-    /// Tasks to wake after resource drivers are polled. This is mostly to
-    /// handle yielded tasks.
-    pub(crate) defer: RefCell<Vec<Notified>>,
-}
-
-/// Running a task may consume the core. If the core is still available when
-/// running the task completes, it is returned. Otherwise, the worker will need
-/// to stop processing.
-type RunResult = Result<Box<Core>, ()>;
-type NextTaskResult = Result<(Option<Notified>, Box<Core>), ()>;
-
-/// A task handle
-type Task = task::Task<Arc<Handle>>;
-
-/// A notified task handle
-type Notified = task::Notified<Arc<Handle>>;
-
-/// Value picked out of thin-air. Running the LIFO slot a handful of times
-/// seemms sufficient to benefit from locality. More than 3 times probably is
-/// overweighing. The value can be tuned in the future with data that shows
-/// improvements.
-const MAX_LIFO_POLLS_PER_TICK: usize = 3;
-
-pub(super) fn create(
-    num_cores: usize,
-    driver: Driver,
-    driver_handle: driver::Handle,
-    blocking_spawner: blocking::Spawner,
-    seed_generator: RngSeedGenerator,
-    config: Config,
-) -> runtime::Handle {
-    let mut num_workers = num_cores;
-
-    // If the driver is enabled, we need an extra thread to handle polling the
-    // driver when all cores are busy.
-    if driver.is_enabled() {
-        num_workers += 1;
-    }
-
-    let mut cores = Vec::with_capacity(num_cores);
-    let mut remotes = Vec::with_capacity(num_cores);
-    // Worker metrics are actually core based
-    let mut worker_metrics = Vec::with_capacity(num_cores);
-
-    // Create the local queues
-    for i in 0..num_cores {
-        let (steal, run_queue) = queue::local(config.local_queue_capacity);
-
-        let metrics = WorkerMetrics::from_config(&config);
-        let stats = Stats::new(&metrics);
-
-        cores.push(Box::new(Core {
-            index: i,
-            lifo_slot: None,
-            run_queue,
-            is_searching: false,
-            stats,
-            rand: FastRand::from_seed(config.seed_generator.next_seed()),
-        }));
-
-        remotes.push(Remote {
-            steal,
-            // lifo_slot: Lifo::new(),
-        });
-        worker_metrics.push(metrics);
-    }
-
-    // Allocate num-cores + 1 workers, so one worker can handle the I/O driver,
-    // if needed.
-    let (idle, idle_synced) = Idle::new(cores, num_workers);
-    let (inject, inject_synced) = inject::Shared::new();
-
-    let handle = Arc::new(Handle {
-        shared: Shared {
-            remotes: remotes.into_boxed_slice(),
-            inject,
-            idle,
-            owned: OwnedTasks::new(num_cores),
-            synced: Mutex::new(Synced {
-                assigned_cores: (0..num_workers).map(|_| None).collect(),
-                shutdown_cores: Vec::with_capacity(num_cores),
-                shutdown_driver: None,
-                idle: idle_synced,
-                inject: inject_synced,
-            }),
-            driver: AtomicCell::new(Some(Box::new(driver))),
-            condvars: (0..num_workers).map(|_| Condvar::new()).collect(),
-            trace_status: TraceStatus::new(num_cores),
-            config,
-            scheduler_metrics: SchedulerMetrics::new(),
-            worker_metrics: worker_metrics.into_boxed_slice(),
-            _counters: Counters,
-        },
-        driver: driver_handle,
-        blocking_spawner,
-        seed_generator,
-    });
-
-    let rt_handle = runtime::Handle {
-        inner: scheduler::Handle::MultiThreadAlt(handle),
-    };
-
-    // Eagerly start worker threads
-    for index in 0..num_workers {
-        let handle = rt_handle.inner.expect_multi_thread_alt();
-        let h2 = handle.clone();
-        let handoff_core = Arc::new(AtomicCell::new(None));
-
-        handle
-            .blocking_spawner
-            .spawn_blocking(&rt_handle, move || run(index, h2, handoff_core, false));
-    }
-
-    rt_handle
-}
-
-#[track_caller]
-pub(crate) fn block_in_place<F, R>(f: F) -> R
-where
-    F: FnOnce() -> R,
-{
-    // Try to steal the worker core back
-    struct Reset(coop::Budget);
-
-    impl Drop for Reset {
-        fn drop(&mut self) {
-            with_current(|maybe_cx| {
-                if let Some(cx) = maybe_cx {
-                    let core = cx.handoff_core.take();
-                    let mut cx_core = cx.core.borrow_mut();
-                    assert!(cx_core.is_none());
-                    *cx_core = core;
-
-                    // Reset the task budget as we are re-entering the
-                    // runtime.
-                    coop::set(self.0);
-                }
-            });
-        }
-    }
-
-    let mut had_entered = false;
-
-    let setup_result = with_current(|maybe_cx| {
-        match (
-            crate::runtime::context::current_enter_context(),
-            maybe_cx.is_some(),
-        ) {
-            (context::EnterRuntime::Entered { .. }, true) => {
-                // We are on a thread pool runtime thread, so we just need to
-                // set up blocking.
-                had_entered = true;
-            }
-            (
-                context::EnterRuntime::Entered {
-                    allow_block_in_place,
-                },
-                false,
-            ) => {
-                // We are on an executor, but _not_ on the thread pool.  That is
-                // _only_ okay if we are in a thread pool runtime's block_on
-                // method:
-                if allow_block_in_place {
-                    had_entered = true;
-                    return Ok(());
-                } else {
-                    // This probably means we are on the current_thread runtime or in a
-                    // LocalSet, where it is _not_ okay to block.
-                    return Err(
-                        "can call blocking only when running on the multi-threaded runtime",
-                    );
-                }
-            }
-            (context::EnterRuntime::NotEntered, true) => {
-                // This is a nested call to block_in_place (we already exited).
-                // All the necessary setup has already been done.
-                return Ok(());
-            }
-            (context::EnterRuntime::NotEntered, false) => {
-                // We are outside of the tokio runtime, so blocking is fine.
-                // We can also skip all of the thread pool blocking setup steps.
-                return Ok(());
-            }
-        }
-
-        let cx = maybe_cx.expect("no .is_some() == false cases above should lead here");
-
-        // Get the worker core. If none is set, then blocking is fine!
-        let core = match cx.core.borrow_mut().take() {
-            Some(core) => core,
-            None => return Ok(()),
-        };
-
-        // In order to block, the core must be sent to another thread for
-        // execution.
-        //
-        // First, move the core back into the worker's shared core slot.
-        cx.handoff_core.set(core);
-
-        // Next, clone the worker handle and send it to a new thread for
-        // processing.
-        //
-        // Once the blocking task is done executing, we will attempt to
-        // steal the core back.
-        let index = cx.index;
-        let handle = cx.handle.clone();
-        let handoff_core = cx.handoff_core.clone();
-        runtime::spawn_blocking(move || run(index, handle, handoff_core, true));
-        Ok(())
-    });
-
-    if let Err(panic_message) = setup_result {
-        panic!("{}", panic_message);
-    }
-
-    if had_entered {
-        // Unset the current task's budget. Blocking sections are not
-        // constrained by task budgets.
-        let _reset = Reset(coop::stop());
-
-        crate::runtime::context::exit_runtime(f)
-    } else {
-        f()
-    }
-}
-
-fn run(
-    index: usize,
-    handle: Arc<Handle>,
-    handoff_core: Arc<AtomicCell<Core>>,
-    blocking_in_place: bool,
-) {
-    struct AbortOnPanic;
-
-    impl Drop for AbortOnPanic {
-        fn drop(&mut self) {
-            if std::thread::panicking() {
-                eprintln!("worker thread panicking; aborting process");
-                std::process::abort();
-            }
-        }
-    }
-
-    // Catching panics on worker threads in tests is quite tricky. Instead, when
-    // debug assertions are enabled, we just abort the process.
-    #[cfg(debug_assertions)]
-    let _abort_on_panic = AbortOnPanic;
-
-    let num_workers = handle.shared.condvars.len();
-
-    let mut worker = Worker {
-        tick: 0,
-        num_seq_local_queue_polls: 0,
-        global_queue_interval: Stats::DEFAULT_GLOBAL_QUEUE_INTERVAL,
-        is_shutdown: false,
-        is_traced: false,
-        workers_to_notify: Vec::with_capacity(num_workers - 1),
-        idle_snapshot: idle::Snapshot::new(&handle.shared.idle),
-        stats: stats::Ephemeral::new(),
-    };
-
-    let sched_handle = scheduler::Handle::MultiThreadAlt(handle.clone());
-
-    crate::runtime::context::enter_runtime(&sched_handle, true, |_| {
-        // Set the worker context.
-        let cx = scheduler::Context::MultiThreadAlt(Context {
-            index,
-            lifo_enabled: Cell::new(!handle.shared.config.disable_lifo_slot),
-            handle,
-            core: RefCell::new(None),
-            handoff_core,
-            defer: RefCell::new(Vec::with_capacity(64)),
-        });
-
-        context::set_scheduler(&cx, || {
-            let cx = cx.expect_multi_thread_alt();
-
-            // Run the worker
-            let res = worker.run(&cx, blocking_in_place);
-            // `err` here signifies the core was lost, this is an expected end
-            // state for a worker.
-            debug_assert!(res.is_err());
-
-            // Check if there are any deferred tasks to notify. This can happen when
-            // the worker core is lost due to `block_in_place()` being called from
-            // within the task.
-            if !cx.defer.borrow().is_empty() {
-                worker.schedule_deferred_without_core(&cx, &mut cx.shared().synced.lock());
-            }
-        });
-    });
-}
-
-macro_rules! try_task {
-    ($e:expr) => {{
-        let (task, core) = $e?;
-        if task.is_some() {
-            return Ok((task, core));
-        }
-        core
-    }};
-}
-
-macro_rules! try_task_new_batch {
-    ($w:expr, $e:expr) => {{
-        let (task, mut core) = $e?;
-        if task.is_some() {
-            core.stats.start_processing_scheduled_tasks(&mut $w.stats);
-            return Ok((task, core));
-        }
-        core
-    }};
-}
-
-impl Worker {
-    fn run(&mut self, cx: &Context, blocking_in_place: bool) -> RunResult {
-        let (maybe_task, mut core) = {
-            if blocking_in_place {
-                if let Some(core) = cx.handoff_core.take() {
-                    (None, core)
-                } else {
-                    // Just shutdown
-                    return Err(());
-                }
-            } else {
-                let mut synced = cx.shared().synced.lock();
-
-                // First try to acquire an available core
-                if let Some(core) = self.try_acquire_available_core(cx, &mut synced) {
-                    // Try to poll a task from the global queue
-                    let maybe_task = cx.shared().next_remote_task_synced(&mut synced);
-                    (maybe_task, core)
-                } else {
-                    // block the thread to wait for a core to be assigned to us
-                    self.wait_for_core(cx, synced)?
-                }
-            }
-        };
-
-        core.stats.start_processing_scheduled_tasks(&mut self.stats);
-
-        if let Some(task) = maybe_task {
-            core = self.run_task(cx, core, task)?;
-        }
-
-        while !self.is_shutdown {
-            let (maybe_task, c) = self.next_task(cx, core)?;
-            core = c;
-
-            if let Some(task) = maybe_task {
-                core = self.run_task(cx, core, task)?;
-            } else {
-                // The only reason to get `None` from `next_task` is we have
-                // entered the shutdown phase.
-                assert!(self.is_shutdown);
-                break;
-            }
-        }
-
-        cx.shared().shutdown_core(&cx.handle, core);
-
-        // It is possible that tasks wake others during drop, so we need to
-        // clear the defer list.
-        self.shutdown_clear_defer(cx);
-
-        Err(())
-    }
-
-    // Try to acquire an available core, but do not block the thread
-    fn try_acquire_available_core(
-        &mut self,
-        cx: &Context,
-        synced: &mut Synced,
-    ) -> Option<Box<Core>> {
-        if let Some(mut core) = cx
-            .shared()
-            .idle
-            .try_acquire_available_core(&mut synced.idle)
-        {
-            self.reset_acquired_core(cx, synced, &mut core);
-            Some(core)
-        } else {
-            None
-        }
-    }
-
-    // Block the current thread, waiting for an available core
-    fn wait_for_core(
-        &mut self,
-        cx: &Context,
-        mut synced: MutexGuard<'_, Synced>,
-    ) -> NextTaskResult {
-        if cx.shared().idle.needs_searching() {
-            if let Some(mut core) = self.try_acquire_available_core(cx, &mut synced) {
-                cx.shared().idle.transition_worker_to_searching(&mut core);
-                return Ok((None, core));
-            }
-        }
-
-        cx.shared()
-            .idle
-            .transition_worker_to_parked(&mut synced, cx.index);
-
-        // Wait until a core is available, then exit the loop.
-        let mut core = loop {
-            if let Some(core) = synced.assigned_cores[cx.index].take() {
-                break core;
-            }
-
-            // If shutting down, abort
-            if cx.shared().inject.is_closed(&synced.inject) {
-                self.shutdown_clear_defer(cx);
-                return Err(());
-            }
-
-            synced = cx.shared().condvars[cx.index].wait(synced).unwrap();
-        };
-
-        self.reset_acquired_core(cx, &mut synced, &mut core);
-
-        if self.is_shutdown {
-            // Currently shutting down, don't do any more work
-            return Ok((None, core));
-        }
-
-        let n = cmp::max(core.run_queue.remaining_slots() / 2, 1);
-        let maybe_task = self.next_remote_task_batch_synced(cx, &mut synced, &mut core, n);
-
-        Ok((maybe_task, core))
-    }
-
-    /// Ensure core's state is set correctly for the worker to start using.
-    fn reset_acquired_core(&mut self, cx: &Context, synced: &mut Synced, core: &mut Core) {
-        self.global_queue_interval = core.stats.tuned_global_queue_interval(&cx.shared().config);
-        debug_assert!(self.global_queue_interval > 1);
-
-        // Reset `lifo_enabled` here in case the core was previously stolen from
-        // a task that had the LIFO slot disabled.
-        self.reset_lifo_enabled(cx);
-
-        // At this point, the local queue should be empty
-        #[cfg(not(loom))]
-        debug_assert!(core.run_queue.is_empty());
-
-        // Update shutdown state while locked
-        self.update_global_flags(cx, synced);
-    }
-
-    /// Finds the next task to run, this could be from a queue or stealing. If
-    /// none are available, the thread sleeps and tries again.
-    fn next_task(&mut self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        self.assert_lifo_enabled_is_correct(cx);
-
-        if self.is_traced {
-            core = cx.handle.trace_core(core);
-        }
-
-        // Increment the tick
-        self.tick = self.tick.wrapping_add(1);
-
-        // Runs maintenance every so often. When maintenance is run, the
-        // driver is checked, which may result in a task being found.
-        core = try_task!(self.maybe_maintenance(&cx, core));
-
-        // Check the LIFO slot, local run queue, and the injection queue for
-        // a notified task.
-        core = try_task!(self.next_notified_task(cx, core));
-
-        // We consumed all work in the queues and will start searching for work.
-        core.stats.end_processing_scheduled_tasks(&mut self.stats);
-
-        super::counters::inc_num_no_local_work();
-
-        if !cx.defer.borrow().is_empty() {
-            // We are deferring tasks, so poll the resource driver and schedule
-            // the deferred tasks.
-            try_task_new_batch!(self, self.park_yield(cx, core));
-
-            panic!("what happened to the deferred tasks? 🤔");
-        }
-
-        while !self.is_shutdown {
-            // Search for more work, this involves trying to poll the resource
-            // driver, steal from other workers, and check the global queue
-            // again.
-            core = try_task_new_batch!(self, self.search_for_work(cx, core));
-
-            debug_assert!(cx.defer.borrow().is_empty());
-            core = try_task_new_batch!(self, self.park(cx, core));
-        }
-
-        // Shutting down, drop any deferred tasks
-        self.shutdown_clear_defer(cx);
-
-        Ok((None, core))
-    }
-
-    fn next_notified_task(&mut self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        self.num_seq_local_queue_polls += 1;
-
-        if self.num_seq_local_queue_polls % self.global_queue_interval == 0 {
-            super::counters::inc_global_queue_interval();
-
-            self.num_seq_local_queue_polls = 0;
-
-            // Update the global queue interval, if needed
-            self.tune_global_queue_interval(cx, &mut core);
-
-            if let Some(task) = self.next_remote_task(cx) {
-                return Ok((Some(task), core));
-            }
-        }
-
-        if let Some(task) = core.next_local_task() {
-            return Ok((Some(task), core));
-        }
-
-        self.next_remote_task_batch(cx, core)
-    }
-
-    fn next_remote_task(&self, cx: &Context) -> Option<Notified> {
-        if cx.shared().inject.is_empty() {
-            return None;
-        }
-
-        let mut synced = cx.shared().synced.lock();
-        cx.shared().next_remote_task_synced(&mut synced)
-    }
-
-    fn next_remote_task_batch(&self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        if cx.shared().inject.is_empty() {
-            return Ok((None, core));
-        }
-
-        // Other threads can only **remove** tasks from the current worker's
-        // `run_queue`. So, we can be confident that by the time we call
-        // `run_queue.push_back` below, there will be *at least* `cap`
-        // available slots in the queue.
-        let cap = usize::min(
-            core.run_queue.remaining_slots(),
-            usize::max(core.run_queue.max_capacity() / 2, 1),
-        );
-
-        let mut synced = cx.shared().synced.lock();
-        let maybe_task = self.next_remote_task_batch_synced(cx, &mut synced, &mut core, cap);
-        Ok((maybe_task, core))
-    }
-
-    fn next_remote_task_batch_synced(
-        &self,
-        cx: &Context,
-        synced: &mut Synced,
-        core: &mut Core,
-        max: usize,
-    ) -> Option<Notified> {
-        super::counters::inc_num_remote_batch();
-
-        // The worker is currently idle, pull a batch of work from the
-        // injection queue. We don't want to pull *all* the work so other
-        // workers can also get some.
-        let n = if core.is_searching {
-            cx.shared().inject.len() / cx.shared().idle.num_searching() + 1
-        } else {
-            cx.shared().inject.len() / cx.shared().remotes.len() + 1
-        };
-
-        let n = usize::min(n, max) + 1;
-
-        // safety: passing in the correct `inject::Synced`.
-        let mut tasks = unsafe { cx.shared().inject.pop_n(&mut synced.inject, n) };
-
-        // Pop the first task to return immediately
-        let ret = tasks.next();
-
-        // Push the rest of the on the run queue
-        core.run_queue.push_back(tasks);
-
-        ret
-    }
-
-    /// Function responsible for stealing tasks from another worker
-    ///
-    /// Note: Only if less than half the workers are searching for tasks to steal
-    /// a new worker will actually try to steal. The idea is to make sure not all
-    /// workers will be trying to steal at the same time.
-    fn search_for_work(&mut self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        #[cfg(not(loom))]
-        const ROUNDS: usize = 4;
-
-        #[cfg(loom)]
-        const ROUNDS: usize = 1;
-
-        debug_assert!(core.lifo_slot.is_none());
-        #[cfg(not(loom))]
-        debug_assert!(core.run_queue.is_empty());
-
-        if !core.run_queue.can_steal() {
-            return Ok((None, core));
-        }
-
-        if !self.transition_to_searching(cx, &mut core) {
-            return Ok((None, core));
-        }
-
-        // core = try_task!(self, self.poll_driver(cx, core));
-
-        // Get a snapshot of which workers are idle
-        cx.shared().idle.snapshot(&mut self.idle_snapshot);
-
-        let num = cx.shared().remotes.len();
-
-        for i in 0..ROUNDS {
-            // Start from a random worker
-            let start = core.rand.fastrand_n(num as u32) as usize;
-
-            if let Some(task) = self.steal_one_round(cx, &mut core, start) {
-                return Ok((Some(task), core));
-            }
-
-            core = try_task!(self.next_remote_task_batch(cx, core));
-
-            if i > 0 {
-                super::counters::inc_num_spin_stall();
-                std::thread::sleep(std::time::Duration::from_micros(i as u64));
-            }
-        }
-
-        Ok((None, core))
-    }
-
-    fn steal_one_round(&self, cx: &Context, core: &mut Core, start: usize) -> Option<Notified> {
-        let num = cx.shared().remotes.len();
-
-        for i in 0..num {
-            let i = (start + i) % num;
-
-            // Don't steal from ourself! We know we don't have work.
-            if i == core.index {
-                continue;
-            }
-
-            // If the core is currently idle, then there is nothing to steal.
-            if self.idle_snapshot.is_idle(i) {
-                continue;
-            }
-
-            let target = &cx.shared().remotes[i];
-
-            if let Some(task) = target
-                .steal
-                .steal_into(&mut core.run_queue, &mut core.stats)
-            {
-                return Some(task);
-            }
-        }
-
-        None
-    }
-
-    fn run_task(&mut self, cx: &Context, mut core: Box<Core>, task: Notified) -> RunResult {
-        let task = cx.shared().owned.assert_owner(task);
-
-        // Make sure the worker is not in the **searching** state. This enables
-        // another idle worker to try to steal work.
-        if self.transition_from_searching(cx, &mut core) {
-            super::counters::inc_num_relay_search();
-            cx.shared().notify_parked_local();
-        }
-
-        self.assert_lifo_enabled_is_correct(cx);
-
-        // Measure the poll start time. Note that we may end up polling other
-        // tasks under this measurement. In this case, the tasks came from the
-        // LIFO slot and are considered part of the current task for scheduling
-        // purposes. These tasks inherent the "parent"'s limits.
-        core.stats.start_poll(&mut self.stats);
-
-        // Make the core available to the runtime context
-        *cx.core.borrow_mut() = Some(core);
-
-        // Run the task
-        coop::budget(|| {
-            super::counters::inc_num_polls();
-            task.run();
-            let mut lifo_polls = 0;
-
-            // As long as there is budget remaining and a task exists in the
-            // `lifo_slot`, then keep running.
-            loop {
-                // Check if we still have the core. If not, the core was stolen
-                // by another worker.
-                let mut core = match cx.core.borrow_mut().take() {
-                    Some(core) => core,
-                    None => {
-                        // In this case, we cannot call `reset_lifo_enabled()`
-                        // because the core was stolen. The stealer will handle
-                        // that at the top of `Context::run`
-                        return Err(());
-                    }
-                };
-
-                // Check for a task in the LIFO slot
-                let task = match core.next_lifo_task() {
-                    Some(task) => task,
-                    None => {
-                        self.reset_lifo_enabled(cx);
-                        core.stats.end_poll();
-                        return Ok(core);
-                    }
-                };
-
-                if !coop::has_budget_remaining() {
-                    core.stats.end_poll();
-
-                    // Not enough budget left to run the LIFO task, push it to
-                    // the back of the queue and return.
-                    core.run_queue
-                        .push_back_or_overflow(task, cx.shared(), &mut core.stats);
-                    // If we hit this point, the LIFO slot should be enabled.
-                    // There is no need to reset it.
-                    debug_assert!(cx.lifo_enabled.get());
-                    return Ok(core);
-                }
-
-                // Track that we are about to run a task from the LIFO slot.
-                lifo_polls += 1;
-                super::counters::inc_lifo_schedules();
-
-                // Disable the LIFO slot if we reach our limit
-                //
-                // In ping-ping style workloads where task A notifies task B,
-                // which notifies task A again, continuously prioritizing the
-                // LIFO slot can cause starvation as these two tasks will
-                // repeatedly schedule the other. To mitigate this, we limit the
-                // number of times the LIFO slot is prioritized.
-                if lifo_polls >= MAX_LIFO_POLLS_PER_TICK {
-                    cx.lifo_enabled.set(false);
-                    super::counters::inc_lifo_capped();
-                }
-
-                // Run the LIFO task, then loop
-                *cx.core.borrow_mut() = Some(core);
-                let task = cx.shared().owned.assert_owner(task);
-                super::counters::inc_num_lifo_polls();
-                task.run();
-            }
-        })
-    }
-
-    fn schedule_deferred_with_core<'a>(
-        &mut self,
-        cx: &'a Context,
-        mut core: Box<Core>,
-        synced: impl FnOnce() -> MutexGuard<'a, Synced>,
-    ) -> NextTaskResult {
-        let mut defer = cx.defer.borrow_mut();
-
-        // Grab a task to run next
-        let task = defer.pop();
-
-        if task.is_none() {
-            return Ok((None, core));
-        }
-
-        if !defer.is_empty() {
-            let mut synced = synced();
-
-            // Number of tasks we want to try to spread across idle workers
-            let num_fanout = cmp::min(defer.len(), cx.shared().idle.num_idle(&synced.idle));
-
-            // Cap the number of threads woken up at one time. This is to limit
-            // the number of no-op wakes and reduce mutext contention.
-            //
-            // This number was picked after some basic benchmarks, but it can
-            // probably be tuned using the mean poll time value (slower task
-            // polls can leverage more woken workers).
-            let num_fanout = cmp::min(2, num_fanout);
-
-            if num_fanout > 0 {
-                cx.shared()
-                    .push_remote_task_batch_synced(&mut synced, defer.drain(..num_fanout));
-
-                cx.shared()
-                    .idle
-                    .notify_mult(&mut synced, &mut self.workers_to_notify, num_fanout);
-            }
-
-            // Do not run the task while holding the lock...
-            drop(synced);
-        }
-
-        // Notify any workers
-        for worker in self.workers_to_notify.drain(..) {
-            cx.shared().condvars[worker].notify_one()
-        }
-
-        if !defer.is_empty() {
-            // Push the rest of the tasks on the local queue
-            for task in defer.drain(..) {
-                core.run_queue
-                    .push_back_or_overflow(task, cx.shared(), &mut core.stats);
-            }
-
-            cx.shared().notify_parked_local();
-        }
-
-        Ok((task, core))
-    }
-
-    fn schedule_deferred_without_core<'a>(&mut self, cx: &Context, synced: &mut Synced) {
-        let mut defer = cx.defer.borrow_mut();
-        let num = defer.len();
-
-        if num > 0 {
-            // Push all tasks to the injection queue
-            cx.shared()
-                .push_remote_task_batch_synced(synced, defer.drain(..));
-
-            debug_assert!(self.workers_to_notify.is_empty());
-
-            // Notify workers
-            cx.shared()
-                .idle
-                .notify_mult(synced, &mut self.workers_to_notify, num);
-
-            // Notify any workers
-            for worker in self.workers_to_notify.drain(..) {
-                cx.shared().condvars[worker].notify_one()
-            }
-        }
-    }
-
-    fn maybe_maintenance(&mut self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        if self.tick % cx.shared().config.event_interval == 0 {
-            super::counters::inc_num_maintenance();
-
-            core.stats.end_processing_scheduled_tasks(&mut self.stats);
-
-            // Run regularly scheduled maintenance
-            core = try_task_new_batch!(self, self.park_yield(cx, core));
-
-            core.stats.start_processing_scheduled_tasks(&mut self.stats);
-        }
-
-        Ok((None, core))
-    }
-
-    fn flush_metrics(&self, cx: &Context, core: &mut Core) {
-        core.stats.submit(&cx.shared().worker_metrics[core.index]);
-    }
-
-    fn update_global_flags(&mut self, cx: &Context, synced: &mut Synced) {
-        if !self.is_shutdown {
-            self.is_shutdown = cx.shared().inject.is_closed(&synced.inject);
-        }
-
-        if !self.is_traced {
-            self.is_traced = cx.shared().trace_status.trace_requested();
-        }
-    }
-
-    fn park_yield(&mut self, cx: &Context, core: Box<Core>) -> NextTaskResult {
-        // Call `park` with a 0 timeout. This enables the I/O driver, timer, ...
-        // to run without actually putting the thread to sleep.
-        if let Some(mut driver) = cx.shared().driver.take() {
-            driver.park_timeout(&cx.handle.driver, Duration::from_millis(0));
-
-            cx.shared().driver.set(driver);
-        }
-
-        // If there are more I/O events, schedule them.
-        let (maybe_task, mut core) =
-            self.schedule_deferred_with_core(cx, core, || cx.shared().synced.lock())?;
-
-        self.flush_metrics(cx, &mut core);
-        self.update_global_flags(cx, &mut cx.shared().synced.lock());
-
-        Ok((maybe_task, core))
-    }
-
-    /*
-    fn poll_driver(&mut self, cx: &Context, core: Box<Core>) -> NextTaskResult {
-        // Call `park` with a 0 timeout. This enables the I/O driver, timer, ...
-        // to run without actually putting the thread to sleep.
-        if let Some(mut driver) = cx.shared().driver.take() {
-            driver.park_timeout(&cx.handle.driver, Duration::from_millis(0));
-
-            cx.shared().driver.set(driver);
-
-            // If there are more I/O events, schedule them.
-            self.schedule_deferred_with_core(cx, core, || cx.shared().synced.lock())
-        } else {
-            Ok((None, core))
-        }
-    }
-    */
-
-    fn park(&mut self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        if let Some(f) = &cx.shared().config.before_park {
-            f();
-        }
-
-        if self.can_transition_to_parked(&mut core) {
-            debug_assert!(!self.is_shutdown);
-            debug_assert!(!self.is_traced);
-
-            core = try_task!(self.do_park(cx, core));
-        }
-
-        if let Some(f) = &cx.shared().config.after_unpark {
-            f();
-        }
-
-        Ok((None, core))
-    }
-
-    fn do_park(&mut self, cx: &Context, mut core: Box<Core>) -> NextTaskResult {
-        let was_searching = core.is_searching;
-
-        // Acquire the lock
-        let mut synced = cx.shared().synced.lock();
-
-        // The local queue should be empty at this point
-        #[cfg(not(loom))]
-        debug_assert!(core.run_queue.is_empty());
-
-        // Try one last time to get tasks
-        let n = cmp::max(core.run_queue.remaining_slots() / 2, 1);
-        if let Some(task) = self.next_remote_task_batch_synced(cx, &mut synced, &mut core, n) {
-            return Ok((Some(task), core));
-        }
-
-        if !was_searching {
-            if cx
-                .shared()
-                .idle
-                .transition_worker_to_searching_if_needed(&mut synced.idle, &mut core)
-            {
-                // Skip parking, go back to searching
-                return Ok((None, core));
-            }
-        }
-
-        super::counters::inc_num_parks();
-        core.stats.about_to_park();
-        // Flush metrics to the runtime metrics aggregator
-        self.flush_metrics(cx, &mut core);
-
-        // If the runtime is shutdown, skip parking
-        self.update_global_flags(cx, &mut synced);
-
-        if self.is_shutdown {
-            return Ok((None, core));
-        }
-
-        // Release the core
-        core.is_searching = false;
-        cx.shared().idle.release_core(&mut synced, core);
-
-        drop(synced);
-
-        if was_searching {
-            if cx.shared().idle.transition_worker_from_searching() {
-                // cx.shared().idle.snapshot(&mut self.idle_snapshot);
-                // We were the last searching worker, we need to do one last check
-                for i in 0..cx.shared().remotes.len() {
-                    if !cx.shared().remotes[i].steal.is_empty() {
-                        let mut synced = cx.shared().synced.lock();
-
-                        // Try to get a core
-                        if let Some(mut core) = self.try_acquire_available_core(cx, &mut synced) {
-                            cx.shared().idle.transition_worker_to_searching(&mut core);
-                            return Ok((None, core));
-                        } else {
-                            // Fall back to the park routine
-                            break;
-                        }
-                    }
-                }
-            }
-        }
-
-        if let Some(mut driver) = cx.shared().take_driver() {
-            // Wait for driver events
-            driver.park(&cx.handle.driver);
-
-            synced = cx.shared().synced.lock();
-
-            if cx.shared().inject.is_closed(&mut synced.inject) {
-                synced.shutdown_driver = Some(driver);
-                self.shutdown_clear_defer(cx);
-                cx.shared().shutdown_finalize(&cx.handle, &mut synced);
-                return Err(());
-            }
-
-            // Put the driver back
-            cx.shared().driver.set(driver);
-
-            // Try to acquire an available core to schedule I/O events
-            if let Some(core) = self.try_acquire_available_core(cx, &mut synced) {
-                // This may result in a task being run
-                self.schedule_deferred_with_core(cx, core, move || synced)
-            } else {
-                // Schedule any deferred tasks
-                self.schedule_deferred_without_core(cx, &mut synced);
-
-                // Wait for a core.
-                self.wait_for_core(cx, synced)
-            }
-        } else {
-            synced = cx.shared().synced.lock();
-
-            // Wait for a core to be assigned to us
-            self.wait_for_core(cx, synced)
-        }
-    }
-
-    fn transition_to_searching(&self, cx: &Context, core: &mut Core) -> bool {
-        if !core.is_searching {
-            cx.shared().idle.try_transition_worker_to_searching(core);
-        }
-
-        core.is_searching
-    }
-
-    /// Returns `true` if another worker must be notified
-    fn transition_from_searching(&self, cx: &Context, core: &mut Core) -> bool {
-        if !core.is_searching {
-            return false;
-        }
-
-        core.is_searching = false;
-        cx.shared().idle.transition_worker_from_searching()
-    }
-
-    fn can_transition_to_parked(&self, core: &mut Core) -> bool {
-        !self.has_tasks(core) && !self.is_shutdown && !self.is_traced
-    }
-
-    fn has_tasks(&self, core: &Core) -> bool {
-        core.lifo_slot.is_some() || !core.run_queue.is_empty()
-    }
-
-    fn reset_lifo_enabled(&self, cx: &Context) {
-        cx.lifo_enabled
-            .set(!cx.handle.shared.config.disable_lifo_slot);
-    }
-
-    fn assert_lifo_enabled_is_correct(&self, cx: &Context) {
-        debug_assert_eq!(
-            cx.lifo_enabled.get(),
-            !cx.handle.shared.config.disable_lifo_slot
-        );
-    }
-
-    fn tune_global_queue_interval(&mut self, cx: &Context, core: &mut Core) {
-        let next = core.stats.tuned_global_queue_interval(&cx.shared().config);
-
-        debug_assert!(next > 1);
-
-        // Smooth out jitter
-        if abs_diff(self.global_queue_interval, next) > 2 {
-            self.global_queue_interval = next;
-        }
-    }
-
-    fn shutdown_clear_defer(&self, cx: &Context) {
-        let mut defer = cx.defer.borrow_mut();
-
-        for task in defer.drain(..) {
-            drop(task);
-        }
-    }
-}
-
-impl Context {
-    pub(crate) fn defer(&self, waker: &Waker) {
-        // TODO: refactor defer across all runtimes
-        waker.wake_by_ref();
-    }
-
-    fn shared(&self) -> &Shared {
-        &self.handle.shared
-    }
-}
-
-impl Core {
-    fn next_local_task(&mut self) -> Option<Notified> {
-        self.next_lifo_task().or_else(|| self.run_queue.pop())
-    }
-
-    fn next_lifo_task(&mut self) -> Option<Notified> {
-        self.lifo_slot.take()
-    }
-}
-
-impl Shared {
-    fn next_remote_task_synced(&self, synced: &mut Synced) -> Option<Notified> {
-        // safety: we only have access to a valid `Synced` in this file.
-        unsafe { self.inject.pop(&mut synced.inject) }
-    }
-
-    pub(super) fn schedule_task(&self, task: Notified, is_yield: bool) {
-        use std::ptr;
-
-        with_current(|maybe_cx| {
-            if let Some(cx) = maybe_cx {
-                // Make sure the task is part of the **current** scheduler.
-                if ptr::eq(self, &cx.handle.shared) {
-                    // And the current thread still holds a core
-                    if let Some(core) = cx.core.borrow_mut().as_mut() {
-                        if is_yield {
-                            cx.defer.borrow_mut().push(task);
-                        } else {
-                            self.schedule_local(cx, core, task);
-                        }
-                    } else {
-                        // This can happen if either the core was stolen
-                        // (`block_in_place`) or the notification happens from
-                        // the driver.
-                        cx.defer.borrow_mut().push(task);
-                    }
-                    return;
-                }
-            }
-
-            // Otherwise, use the inject queue.
-            self.schedule_remote(task);
-        })
-    }
-
-    fn schedule_local(&self, cx: &Context, core: &mut Core, task: Notified) {
-        core.stats.inc_local_schedule_count();
-
-        if cx.lifo_enabled.get() {
-            // Push to the LIFO slot
-            let prev = std::mem::replace(&mut core.lifo_slot, Some(task));
-            // let prev = cx.shared().remotes[core.index].lifo_slot.swap_local(task);
-
-            if let Some(prev) = prev {
-                core.run_queue
-                    .push_back_or_overflow(prev, self, &mut core.stats);
-            } else {
-                return;
-            }
-        } else {
-            core.run_queue
-                .push_back_or_overflow(task, self, &mut core.stats);
-        }
-
-        self.notify_parked_local();
-    }
-
-    fn notify_parked_local(&self) {
-        super::counters::inc_num_inc_notify_local();
-        self.idle.notify_local(self);
-    }
-
-    fn schedule_remote(&self, task: Notified) {
-        super::counters::inc_num_notify_remote();
-        self.scheduler_metrics.inc_remote_schedule_count();
-
-        let mut synced = self.synced.lock();
-        // Push the task in the
-        self.push_remote_task(&mut synced, task);
-
-        // Notify a worker. The mutex is passed in and will be released as part
-        // of the method call.
-        self.idle.notify_remote(synced, self);
-    }
-
-    pub(super) fn close(&self, handle: &Handle) {
-        {
-            let mut synced = self.synced.lock();
-
-            if let Some(driver) = self.driver.take() {
-                synced.shutdown_driver = Some(driver);
-            }
-
-            if !self.inject.close(&mut synced.inject) {
-                return;
-            }
-
-            // Set the shutdown flag on all available cores
-            self.idle.shutdown(&mut synced, self);
-        }
-
-        // Any unassigned cores need to be shutdown, but we have to first drop
-        // the lock
-        self.idle.shutdown_unassigned_cores(handle, self);
-    }
-
-    fn push_remote_task(&self, synced: &mut Synced, task: Notified) {
-        // safety: passing in correct `idle::Synced`
-        unsafe {
-            self.inject.push(&mut synced.inject, task);
-        }
-    }
-
-    fn push_remote_task_batch<I>(&self, iter: I)
-    where
-        I: Iterator<Item = task::Notified<Arc<Handle>>>,
-    {
-        unsafe {
-            self.inject.push_batch(self, iter);
-        }
-    }
-
-    fn push_remote_task_batch_synced<I>(&self, synced: &mut Synced, iter: I)
-    where
-        I: Iterator<Item = task::Notified<Arc<Handle>>>,
-    {
-        unsafe {
-            self.inject.push_batch(&mut synced.inject, iter);
-        }
-    }
-
-    fn take_driver(&self) -> Option<Box<Driver>> {
-        if !self.driver_enabled() {
-            return None;
-        }
-
-        self.driver.take()
-    }
-
-    fn driver_enabled(&self) -> bool {
-        self.condvars.len() > self.remotes.len()
-    }
-
-    pub(super) fn shutdown_core(&self, handle: &Handle, mut core: Box<Core>) {
-        // Start from a random inner list
-        let start = core.rand.fastrand_n(self.owned.get_shard_size() as u32);
-        self.owned.close_and_shutdown_all(start as usize);
-
-        core.stats.submit(&self.worker_metrics[core.index]);
-
-        let mut synced = self.synced.lock();
-        synced.shutdown_cores.push(core);
-
-        self.shutdown_finalize(handle, &mut synced);
-    }
-
-    pub(super) fn shutdown_finalize(&self, handle: &Handle, synced: &mut Synced) {
-        // Wait for all cores
-        if synced.shutdown_cores.len() != self.remotes.len() {
-            return;
-        }
-
-        let driver = synced.shutdown_driver.take();
-
-        if self.driver_enabled() && driver.is_none() {
-            return;
-        }
-
-        debug_assert!(self.owned.is_empty());
-
-        for mut core in synced.shutdown_cores.drain(..) {
-            // Drain tasks from the local queue
-            while core.next_local_task().is_some() {}
-        }
-
-        // Shutdown the driver
-        if let Some(mut driver) = driver {
-            driver.shutdown(&handle.driver);
-        }
-
-        // Drain the injection queue
-        //
-        // We already shut down every task, so we can simply drop the tasks. We
-        // cannot call `next_remote_task()` because we already hold the lock.
-        //
-        // safety: passing in correct `idle::Synced`
-        while let Some(task) = self.next_remote_task_synced(synced) {
-            drop(task);
-        }
-    }
-}
-
-impl Overflow<Arc<Handle>> for Shared {
-    fn push(&self, task: task::Notified<Arc<Handle>>) {
-        self.push_remote_task(&mut self.synced.lock(), task);
-    }
-
-    fn push_batch<I>(&self, iter: I)
-    where
-        I: Iterator<Item = task::Notified<Arc<Handle>>>,
-    {
-        self.push_remote_task_batch(iter)
-    }
-}
-
-impl<'a> Lock<inject::Synced> for &'a Shared {
-    type Handle = SyncedGuard<'a>;
-
-    fn lock(self) -> Self::Handle {
-        SyncedGuard {
-            lock: self.synced.lock(),
-        }
-    }
-}
-
-impl<'a> Lock<Synced> for &'a Shared {
-    type Handle = SyncedGuard<'a>;
-
-    fn lock(self) -> Self::Handle {
-        SyncedGuard {
-            lock: self.synced.lock(),
-        }
-    }
-}
-
-impl task::Schedule for Arc<Handle> {
-    fn release(&self, task: &Task) -> Option<Task> {
-        self.shared.owned.remove(task)
-    }
-
-    fn schedule(&self, task: Notified) {
-        self.shared.schedule_task(task, false);
-    }
-
-    fn yield_now(&self, task: Notified) {
-        self.shared.schedule_task(task, true);
-    }
-}
-
-impl AsMut<Synced> for Synced {
-    fn as_mut(&mut self) -> &mut Synced {
-        self
-    }
-}
-
-pub(crate) struct SyncedGuard<'a> {
-    lock: crate::loom::sync::MutexGuard<'a, Synced>,
-}
-
-impl<'a> AsMut<inject::Synced> for SyncedGuard<'a> {
-    fn as_mut(&mut self) -> &mut inject::Synced {
-        &mut self.lock.inject
-    }
-}
-
-impl<'a> AsMut<Synced> for SyncedGuard<'a> {
-    fn as_mut(&mut self) -> &mut Synced {
-        &mut self.lock
-    }
-}
-
-#[track_caller]
-fn with_current<R>(f: impl FnOnce(Option<&Context>) -> R) -> R {
-    use scheduler::Context::MultiThreadAlt;
-
-    context::with_scheduler(|ctx| match ctx {
-        Some(MultiThreadAlt(ctx)) => f(Some(ctx)),
-        _ => f(None),
-    })
-}
-
-// `u32::abs_diff` is not available on Tokio's MSRV.
-fn abs_diff(a: u32, b: u32) -> u32 {
-    if a > b {
-        a - b
-    } else {
-        b - a
-    }
-}