typo 5.0.2 → 5.0.3.98

data/public/javascripts/fckeditor/editor/filemanager/connectors/cfm/cf5_connector.cfm

@@ -0,0 +1,315 @@
+<cfsetting enablecfoutputonly="yes" showdebugoutput="no">
+<!---
+ * FCKeditor - The text editor for Internet - http://www.fckeditor.net
+ * Copyright (C) 2003-2007 Frederico Caldeira Knabben
+ *
+ * == BEGIN LICENSE ==
+ *
+ * Licensed under the terms of any of the following licenses at your
+ * choice:
+ *
+ *  - GNU General Public License Version 2 or later (the "GPL")
+ *    http://www.gnu.org/licenses/gpl.html
+ *
+ *  - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
+ *    http://www.gnu.org/licenses/lgpl.html
+ *
+ *  - Mozilla Public License Version 1.1 or later (the "MPL")
+ *    http://www.mozilla.org/MPL/MPL-1.1.html
+ *
+ * == END LICENSE ==
+ *
+ * File Browser connector for ColdFusion 5.
+ * (based on the original CF connector by Hendrik Kramer - hk@lwd.de)
+ *
+ * Note:
+ * FCKeditor requires that the connector responds with UTF-8 encoded XML.
+ * As ColdFusion 5 does not fully support UTF-8 encoding, we force ASCII
+ * file and folder names in this connector to allow CF5 send a UTF-8
+ * encoded response - code points under 127 in UTF-8 are stored using a
+ * single byte, using the same encoding as ASCII, which is damn handy.
+ * This is all grand for the English speakers, like meself, but I dunno
+ * how others are gonna take to it. Well, the previous version of this
+ * connector already did this with file names and nobody seemed to mind,
+ * so fingers-crossed nobody will mind their folder names being munged too.
+ *
+--->
+
+<cfparam name="url.command">
+<cfparam name="url.type">
+<cfparam name="url.currentFolder">
+<!--- note: no serverPath url parameter - see config.cfm if you need to set the serverPath manually --->
+
+<cfinclude template="config.cfm">
+
+<cfscript>
+	userFilesPath = config.userFilesPath;
+
+	if ( userFilesPath eq "" )
+	{
+		userFilesPath = "/userfiles/";
+	}
+
+	// make sure the user files path is correctly formatted
+	userFilesPath = replace(userFilesPath, "\", "/", "ALL");
+	userFilesPath = replace(userFilesPath, '//', '/', 'ALL');
+	if ( right(userFilesPath,1) NEQ "/" )
+	{
+		userFilesPath = userFilesPath & "/";
+	}
+	if ( left(userFilesPath,1) NEQ "/" )
+	{
+		userFilesPath = "/" & userFilesPath;
+	}
+
+	// make sure the current folder is correctly formatted
+	url.currentFolder = replace(url.currentFolder, "\", "/", "ALL");
+	url.currentFolder = replace(url.currentFolder, '//', '/', 'ALL');
+	if ( right(url.currentFolder,1) neq "/" )
+	{
+		url.currentFolder = url.currentFolder & "/";
+	}
+	if ( left(url.currentFolder,1) neq "/" )
+	{
+		url.currentFolder = "/" & url.currentFolder;
+	}
+
+	if ( find("/",getBaseTemplatePath()) neq 0 )
+	{
+		fs = "/";
+	}
+	else
+	{
+		fs = "\";
+	}
+
+	// Get the base physical path to the web root for this application. The code to determine the path automatically assumes that
+	// the "FCKeditor" directory in the http request path is directly off the web root for the application and that it's not a
+	// virtual directory or a symbolic link / junction. Use the serverPath config setting to force a physical path if necessary.
+	if ( len(config.serverPath) )
+	{
+		serverPath = config.serverPath;
+
+		if ( right(serverPath,1) neq fs )
+		{
+			serverPath = serverPath & fs;
+		}
+	}
+	else
+	{
+		serverPath = replaceNoCase(getBaseTemplatePath(),replace(cgi.script_name,"/",fs,"all"),"") & replace(userFilesPath,"/",fs,"all");
+	}
+
+	rootPath = left( serverPath, Len(serverPath) - Len(userFilesPath) ) ;
+	xmlContent = ""; // append to this string to build content
+</cfscript>
+
+<cfset resourceTypeUrl = rereplace( replace( Config.FileTypesPath[url.type], fs, "/", "all"), "/$", "") >
+
+<cfif isDefined( "Config.FileTypesAbsolutePath" )
+		and structkeyexists( Config.FileTypesAbsolutePath, url.type )
+		and Len( Config.FileTypesAbsolutePath[url.type] )>
+
+			<cfset userFilesServerPath = Config.FileTypesAbsolutePath[url.type] & url.currentFolder>
+<cfelse>
+	<cftry>
+	<cfset userFilesServerPath = expandpath( resourceTypeUrl ) & url.currentFolder>
+	<!--- Catch: Parameter 1 of function ExpandPath must be a relative path --->
+	<cfcatch type="any">
+		<cfset userFilesServerPath = rootPath & Config.FileTypesPath[url.type] & url.currentFolder>
+	</cfcatch>
+	</cftry>
+</cfif>
+
+<cfset userFilesServerPath = replace( userFilesServerPath, "/", fs, "all" ) >
+<!--- get rid of double directory separators --->
+<cfset userFilesServerPath = replace( userFilesServerPath, fs & fs, fs, "all") >
+
+<cfif not config.enabled>
+
+	<cfset xmlContent = "<Error number=""1"" text=""This connector is disabled. Please check the 'editor/filemanager/connectors/cfm/config.cfm' file"" />">
+
+<cfelseif find("..",url.currentFolder)>
+
+	<cfset xmlContent = "<Error number=""102"" />">
+
+<cfelseif isDefined("Config.ConfigAllowedCommands") and not ListFind(Config.ConfigAllowedCommands, url.command)>
+
+	<cfset xmlContent = '<Error number="1" text="The &quot;' & url.command & '&quot; command isn''t allowed" />'>
+
+<cfelseif isDefined("Config.ConfigAllowedTypes") and not ListFind(Config.ConfigAllowedTypes, url.type)>
+
+	<cfset xmlContent = '<Error number="1" text="The &quot;' & url.type & '&quot; type isn''t allowed" />'>
+
+</cfif>
+
+<cfset resourceTypeDirectory = left( userFilesServerPath, Len(userFilesServerPath) - Len(url.currentFolder) )>
+
+<cfif not len(xmlContent) and not directoryexists(resourceTypeDirectory)>
+	<!--- create directories in physical path if they don't already exist --->
+	<cfset currentPath = "">
+	<cftry>
+		<cfloop list="#resourceTypeDirectory#" index="name" delimiters="#fs#">
+			<cfif currentPath eq "" and fs eq "\">
+				<!--- Without checking this, we would have in Windows \C:\ --->
+				<cfif not directoryExists(name)>
+					<cfdirectory action="create" directory="#name#" mode="755">
+				</cfif>
+			<cfelse>
+				<cfif not directoryExists(currentPath & fs & name)>
+					<cfdirectory action="create" directory="#currentPath##fs##name#" mode="755">
+				</cfif>
+			</cfif>
+
+			<cfif fs eq "\" and currentPath eq "">
+				<cfset currentPath = name>
+			<cfelse>
+				<cfset currentPath = currentPath & fs & name>
+			</cfif>
+		</cfloop>
+
+	<cfcatch type="any">
+
+		<!--- this should only occur as a result of a permissions problem --->
+		<cfset xmlContent = "<Error number=""103"" />">
+
+	</cfcatch>
+
+	</cftry>
+</cfif>
+
+<cfif not len(xmlContent)>
+
+	<!--- no errors thus far - run command --->
+
+	<!--- we need to know the physical path to the current folder for all commands --->
+	<cfset currentFolderPath = userFilesServerPath>
+
+	<cfswitch expression="#url.command#">
+
+		<cfcase value="FileUpload">
+			<cfset config_included = true >
+			<cfinclude template="cf5_upload.cfm">
+			<cfabort>
+		</cfcase>
+
+
+		<cfcase value="GetFolders">
+
+			<!--- Sort directories first, name ascending --->
+			<cfdirectory
+				action="list"
+				directory="#currentFolderPath#"
+				name="qDir"
+				sort="type,name">
+
+			<cfscript>
+				i=1;
+				folders = "";
+				while( i lte qDir.recordCount ) {
+					if( not compareNoCase( qDir.type[i], "FILE" ))
+						break;
+					if( not listFind(".,..", qDir.name[i]) )
+						folders = folders & '<Folder name="#HTMLEditFormat( qDir.name[i] )#" />';
+					i=i+1;
+				}
+
+				xmlContent = xmlContent & '<Folders>' & folders & '</Folders>';
+			</cfscript>
+
+		</cfcase>
+
+
+		<cfcase value="GetFoldersAndFiles">
+
+			<!--- Sort directories first, name ascending --->
+			<cfdirectory
+				action="list"
+				directory="#currentFolderPath#"
+				name="qDir"
+				sort="type,name">
+
+			<cfscript>
+				i=1;
+				folders = "";
+				files = "";
+				while( i lte qDir.recordCount ) {
+					if( not compareNoCase( qDir.type[i], "DIR" ) and not listFind(".,..", qDir.name[i]) ) {
+						folders = folders & '<Folder name="#HTMLEditFormat(qDir.name[i])#" />';
+					} else if( not compareNoCase( qDir.type[i], "FILE" ) ) {
+						fileSizeKB = round(qDir.size[i] / 1024);
+						files = files & '<File name="#HTMLEditFormat(qDir.name[i])#" size="#IIf( fileSizeKB GT 0, DE( fileSizeKB ), 1)#" />';
+					}
+					i=i+1;
+				}
+
+				xmlContent = xmlContent & '<Folders>' & folders & '</Folders>';
+				xmlContent = xmlContent & '<Files>' & files & '</Files>';
+			</cfscript>
+
+		</cfcase>
+
+
+		<cfcase value="CreateFolder">
+
+			<cfparam name="url.newFolderName" default="">
+
+			<cfscript>
+				newFolderName = url.newFolderName;
+				if( reFind("[^A-Za-z0-9_\-\.]", newFolderName) ) {
+					// Munge folder name same way as we do the filename
+					// This means folder names are always US-ASCII so we don't have to worry about CF5 and UTF-8
+					newFolderName = reReplace(newFolderName, "[^A-Za-z0-9\-\.]", "_", "all");
+					newFolderName = reReplace(newFolderName, "_{2,}", "_", "all");
+					newFolderName = reReplace(newFolderName, "([^_]+)_+$", "\1", "all");
+					newFolderName = reReplace(newFolderName, "$_([^_]+)$", "\1", "all");
+				}
+			</cfscript>
+
+			<cfif not len(newFolderName) or len(newFolderName) gt 255>
+				<cfset errorNumber = 102>
+			<cfelseif directoryExists(currentFolderPath & newFolderName)>
+				<cfset errorNumber = 101>
+			<cfelseif reFind("^\.\.",newFolderName)>
+				<cfset errorNumber = 103>
+			<cfelse>
+				<cfset errorNumber = 0>
+
+				<cftry>
+					<cfdirectory
+						action="create"
+						directory="#currentFolderPath##newFolderName#"
+						mode="755">
+					<cfcatch>
+						<!---
+						un-resolvable error numbers in ColdFusion:
+						* 102 : Invalid folder name.
+						* 103 : You have no permissions to create the folder.
+						--->
+						<cfset errorNumber = 110>
+					</cfcatch>
+				</cftry>
+			</cfif>
+
+			<cfset xmlContent = xmlContent & '<Error number="#errorNumber#" />'>
+
+		</cfcase>
+
+		<cfdefaultcase>
+			<cfthrow type="fckeditor.connector" message="Illegal command: #url.command#">
+		</cfdefaultcase>
+
+	</cfswitch>
+</cfif>
+
+<cfscript>
+	xmlHeader = '<?xml version="1.0" encoding="utf-8" ?><Connector command="#url.command#" resourceType="#url.type#">';
+	xmlHeader = xmlHeader & '<CurrentFolder path="#url.currentFolder#" url="#resourceTypeUrl##url.currentFolder#" />';
+	xmlFooter = '</Connector>';
+</cfscript>
+
+<cfheader name="Expires" value="#GetHttpTimeString(Now())#">
+<cfheader name="Pragma" value="no-cache">
+<cfheader name="Cache-Control" value="no-cache, no-store, must-revalidate">
+<cfcontent reset="true" type="text/xml; charset=UTF-8">
+<cfoutput>#xmlHeader##xmlContent##xmlFooter#</cfoutput>

data/public/javascripts/fckeditor/editor/filemanager/connectors/cfm/cf5_upload.cfm

@@ -0,0 +1,296 @@
+<cfsetting enablecfoutputonly="Yes">
+<!---
+ * FCKeditor - The text editor for Internet - http://www.fckeditor.net
+ * Copyright (C) 2003-2007 Frederico Caldeira Knabben
+ *
+ * == BEGIN LICENSE ==
+ *
+ * Licensed under the terms of any of the following licenses at your
+ * choice:
+ *
+ *  - GNU General Public License Version 2 or later (the "GPL")
+ *    http://www.gnu.org/licenses/gpl.html
+ *
+ *  - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
+ *    http://www.gnu.org/licenses/lgpl.html
+ *
+ *  - Mozilla Public License Version 1.1 or later (the "MPL")
+ *    http://www.mozilla.org/MPL/MPL-1.1.html
+ *
+ * == END LICENSE ==
+ *
+ * This is the "File Uploader" for ColdFusion 5.
+ * Based on connector.cfm by Mark Woods (mark@thickpaddy.com)
+ *
+ * Note:
+ * FCKeditor requires that the connector responds with UTF-8 encoded XML.
+ * As ColdFusion 5 does not fully support UTF-8 encoding, we force ASCII
+ * file and folder names in this connector to allow CF5 send a UTF-8
+ * encoded response - code points under 127 in UTF-8 are stored using a
+ * single byte, using the same encoding as ASCII, which is damn handy.
+ * This is all grand for the English speakers, like meself, but I dunno
+ * how others are gonna take to it. Well, the previous version of this
+ * connector already did this with file names and nobody seemed to mind,
+ * so fingers-crossed nobody will mind their folder names being munged too.
+ *
+--->
+
+<cfparam name="url.command" default="QuickUpload">
+<cfparam name="url.type" default="File">
+<cfparam name="url.currentFolder" default="/">
+
+<cfif not isDefined("config_included")>
+	<cfinclude template="config.cfm">
+</cfif>
+
+<cfscript>
+	function SendUploadResults(errorNumber, fileUrl, fileName, customMsg)
+	{
+		WriteOutput('<script type="text/javascript">');
+		WriteOutput('window.parent.OnUploadCompleted(' & errorNumber & ', "' & JSStringFormat(fileUrl) & '", "' & JSStringFormat(fileName) & '", "' & JSStringFormat(customMsg) & '");' );
+		WriteOutput('</script>');
+	}
+</cfscript>
+
+<cfif NOT config.enabled>
+	<cfset SendUploadResults(1, "", "", "This file uploader is disabled. Please check the ""editor/filemanager/connectors/cfm/config.cfm"" file")>
+	<cfabort>
+</cfif>
+
+<cfif isDefined("Config.ConfigAllowedCommands") and not ListFind(Config.ConfigAllowedCommands, url.command)>
+	<cfset SendUploadResults(1, "", "", "The """ & url.command & """ command isn't allowed")>
+	<cfabort>
+</cfif>
+
+<cfif isDefined("Config.ConfigAllowedTypes") and not ListFind(Config.ConfigAllowedTypes, url.type)>
+	<cfset SendUploadResults(1, "", "", "The """ & url.type &  """ type isn't allowed")>
+	<cfabort>
+</cfif>
+
+<cfif find( "..", url.currentFolder)>
+	<cfset SendUploadResults(102)>
+	<cfabort>
+</cfif>
+
+<cfscript>
+	userFilesPath = config.userFilesPath;
+
+	if ( userFilesPath eq "" ) {
+		userFilesPath = "/userfiles/";
+	}
+
+	// make sure the user files path is correctly formatted
+	userFilesPath = replace(userFilesPath, "\", "/", "ALL");
+	userFilesPath = replace(userFilesPath, '//', '/', 'ALL');
+	if ( right(userFilesPath,1) NEQ "/" ) {
+		userFilesPath = userFilesPath & "/";
+	}
+	if ( left(userFilesPath,1) NEQ "/" ) {
+		userFilesPath = "/" & userFilesPath;
+	}
+
+	// make sure the current folder is correctly formatted
+	url.currentFolder = replace(url.currentFolder, "\", "/", "ALL");
+	url.currentFolder = replace(url.currentFolder, '//', '/', 'ALL');
+	if ( right(url.currentFolder,1) neq "/" ) {
+		url.currentFolder = url.currentFolder & "/";
+	}
+	if ( left(url.currentFolder,1) neq "/" ) {
+		url.currentFolder = "/" & url.currentFolder;
+	}
+
+	if (find("/",getBaseTemplatePath())) {
+		fs = "/";
+	} else {
+		fs = "\";
+	}
+
+	// Get the base physical path to the web root for this application. The code to determine the path automatically assumes that
+	// the "FCKeditor" directory in the http request path is directly off the web root for the application and that it's not a
+	// virtual directory or a symbolic link / junction. Use the serverPath config setting to force a physical path if necessary.
+	if ( len(config.serverPath) ) {
+		serverPath = config.serverPath;
+
+		if ( right(serverPath,1) neq fs ) {
+			serverPath = serverPath & fs;
+		}
+	} else {
+		serverPath = replaceNoCase(getBaseTemplatePath(),replace(cgi.script_name,"/",fs,"all"),"") & replace(userFilesPath,"/",fs,"all");
+	}
+
+	rootPath = left( serverPath, Len(serverPath) - Len(userFilesPath) ) ;
+</cfscript>
+<cfif url.command eq "QuickUpload">
+	<cfset resourceTypeUrl = rereplace( replace( Config.QuickUploadPath[url.type], fs, "/", "all"), "/$", "") >
+	<cfif isDefined( "Config.QuickUploadAbsolutePath" )
+			and structkeyexists( Config.QuickUploadAbsolutePath, url.type )
+			and Len( Config.QuickUploadAbsolutePath[url.type] )>
+				<cfset userFilesServerPath = Config.QuickUploadAbsolutePath[url.type] & url.currentFolder>
+	<cfelse>
+		<cftry>
+		<cfset userFilesServerPath = expandpath( resourceTypeUrl ) & url.currentFolder>
+		<!--- Catch: Parameter 1 of function ExpandPath must be a relative path --->
+		<cfcatch type="any">
+			<cfset userFilesServerPath = rootPath & Config.QuickUploadPath[url.type] & url.currentFolder>
+		</cfcatch>
+		</cftry>
+	</cfif>
+<cfelse>
+	<cfset resourceTypeUrl = rereplace( replace( Config.FileTypesPath[url.type], fs, "/", "all"), "/$", "") >
+	<cfif isDefined( "Config.FileTypesAbsolutePath" )
+			and structkeyexists( Config.FileTypesAbsolutePath, url.type )
+			and Len( Config.FileTypesAbsolutePath[url.type] )>
+				<cfset userFilesServerPath = Config.FileTypesAbsolutePath[url.type] & url.currentFolder>
+	<cfelse>
+		<cftry>
+		<cfset userFilesServerPath = expandpath( resourceTypeUrl ) & url.currentFolder>
+		<!--- Catch: Parameter 1 of function ExpandPath must be a relative path --->
+		<cfcatch type="any">
+			<cfset userFilesServerPath = rootPath & Config.FileTypesPath[url.type] & url.currentFolder>
+		</cfcatch>
+		</cftry>
+	</cfif>
+</cfif>
+
+<cfset userFilesServerPath = replace( userFilesServerPath, "/", fs, "all" ) >
+<!--- get rid of double directory separators --->
+<cfset userFilesServerPath = replace( userFilesServerPath, fs & fs, fs, "all") >
+
+<!--- create resource type directory if not exists --->
+<cfset resourceTypeDirectory = left( userFilesServerPath, Len(userFilesServerPath) - Len(url.currentFolder) )>
+
+<cfif not directoryexists( resourceTypeDirectory )>
+
+	<cfset currentPath = "">
+	<cftry>
+		<cfloop list="#resourceTypeDirectory#" index="name" delimiters="#fs#">
+			<cfif currentPath eq "" and fs eq "\">
+				<!--- Without checking this, we would have in Windows \C:\ --->
+				<cfif not directoryExists(name)>
+					<cfdirectory action="create" directory="#name#" mode="755">
+				</cfif>
+			<cfelse>
+				<cfif not directoryExists(currentPath & fs & name)>
+					<cfdirectory action="create" directory="#currentPath##fs##name#" mode="755">
+				</cfif>
+			</cfif>
+
+			<cfif fs eq "\" and currentPath eq "">
+				<cfset currentPath = name>
+			<cfelse>
+				<cfset currentPath = currentPath & fs & name>
+			</cfif>
+		</cfloop>
+
+	<cfcatch type="any">
+
+		<!--- this should only occur as a result of a permissions problem --->
+		<cfset SendUploadResults(103)>
+		<cfabort>
+
+	</cfcatch>
+
+	</cftry>
+</cfif>
+
+<cfset currentFolderPath = userFilesServerPath>
+<cfset resourceType = url.type>
+
+<cfset fileName = "">
+<cfset fileExt = "">
+
+<!--- Can be overwritten. The last value will be sent with the result --->
+<cfset customMsg = "">
+
+<cftry>
+	<!--- first upload the file with an unique filename --->
+	<cffile action="upload"
+		fileField="NewFile"
+		destination="#currentFolderPath#"
+		nameConflict="makeunique"
+		mode="644"
+		attributes="normal">
+
+	<cfif cffile.fileSize EQ 0>
+		<cfthrow>
+	</cfif>
+
+	<cfset lAllowedExtensions = config.allowedExtensions[#resourceType#]>
+	<cfset lDeniedExtensions = config.deniedExtensions[#resourceType#]>
+
+	<cfif ( len(lAllowedExtensions) and not listFindNoCase(lAllowedExtensions,cffile.ServerFileExt) )
+		or ( len(lDeniedExtensions) and listFindNoCase(lDeniedExtensions,cffile.ServerFileExt) )>
+
+		<cfset errorNumber = "202">
+		<cffile action="delete" file="#cffile.ServerDirectory##fs##cffile.ServerFile#">
+
+	<cfelse>
+
+		<cfscript>
+		errorNumber = 0;
+		fileName = cffile.ClientFileName ;
+		fileExt = cffile.ServerFileExt ;
+		fileExisted = false ;
+
+		// munge filename for html download. Only a-z, 0-9, _, - and . are allowed
+		if( reFind("[^A-Za-z0-9_\-\.]", fileName) ) {
+			fileName = reReplace(fileName, "[^A-Za-z0-9\-\.]", "_", "ALL");
+			fileName = reReplace(fileName, "_{2,}", "_", "ALL");
+			fileName = reReplace(fileName, "([^_]+)_+$", "\1", "ALL");
+			fileName = reReplace(fileName, "$_([^_]+)$", "\1", "ALL");
+		}
+
+		// remove additional dots from file name
+		if( isDefined("Config.ForceSingleExtension") and Config.ForceSingleExtension )
+			fileName = replace( fileName, '.', "_", "all" ) ;
+
+		// When the original filename already exists, add numbers (0), (1), (2), ... at the end of the filename.
+		if( compare( cffile.ServerFileName, fileName ) ) {
+			counter = 0;
+			tmpFileName = fileName;
+			while( fileExists("#currentFolderPath##fileName#.#fileExt#") ) {
+				fileExisted = true ;
+				counter = counter + 1 ;
+				fileName = tmpFileName & '(#counter#)' ;
+			}
+		}
+		</cfscript>
+
+		<!--- Rename the uploaded file, if neccessary --->
+		<cfif compare(cffile.ServerFileName,fileName)>
+
+			<cfif fileExisted>
+				<cfset errorNumber = "201">
+			</cfif>
+			<cffile
+				action="rename"
+				source="#currentFolderPath##cffile.ServerFileName#.#cffile.ServerFileExt#"
+				destination="#currentFolderPath##fileName#.#fileExt#"
+				mode="644"
+				attributes="normal">
+
+		</cfif>
+
+	</cfif>
+
+	<cfcatch type="any">
+
+		<cfset errorNumber = "1">
+		<cfset customMsg = cfcatch.message >
+
+	</cfcatch>
+</cftry>
+
+<cfif errorNumber EQ 0>
+	<!--- file was uploaded succesfully --->
+	<cfset SendUploadResults(errorNumber, '#resourceTypeUrl##url.currentFolder##fileName#.#fileExt#', "", "")>
+	<cfabort>
+<cfelseif errorNumber EQ 201>
+	<!--- file was changed (201), submit the new filename --->
+	<cfset SendUploadResults(errorNumber, '#resourceTypeUrl##url.currentFolder##fileName#.#fileExt#', replace( fileName & "." & fileExt, "'", "\'", "ALL"), customMsg)>
+	<cfabort>
+<cfelse>
+	<!--- An error occured(202). Submit only the error code and a message (if available). --->
+	<cfset SendUploadResults(errorNumber, '', '', customMsg)>
+	<cfabort>
+</cfif>