therubyracer-heroku 0.8.1.pre2 → 0.8.1.pre3

data/ext/v8/upstream/build/v8/src/assembler.h

@@ -1,573 +0,0 @@
-// Copyright (c) 1994-2006 Sun Microsystems Inc.
-// All Rights Reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-// - Redistributions of source code must retain the above copyright notice,
-// this list of conditions and the following disclaimer.
-//
-// - Redistribution in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of Sun Microsystems or the names of contributors may
-// be used to endorse or promote products derived from this software without
-// specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// The original source code covered by the above license above has been
-// modified significantly by Google Inc.
-// Copyright 2006-2009 the V8 project authors. All rights reserved.
-
-#ifndef V8_ASSEMBLER_H_
-#define V8_ASSEMBLER_H_
-
-#include "runtime.h"
-#include "top.h"
-#include "token.h"
-#include "objects.h"
-
-namespace v8 {
-namespace internal {
-
-
-// -----------------------------------------------------------------------------
-// Labels represent pc locations; they are typically jump or call targets.
-// After declaration, a label can be freely used to denote known or (yet)
-// unknown pc location. Assembler::bind() is used to bind a label to the
-// current pc. A label can be bound only once.
-
-class Label BASE_EMBEDDED {
- public:
-  INLINE(Label())                 { Unuse(); }
-  INLINE(~Label())                { ASSERT(!is_linked()); }
-
-  INLINE(void Unuse())            { pos_ = 0; }
-
-  INLINE(bool is_bound()  const)  { return pos_ <  0; }
-  INLINE(bool is_unused() const)  { return pos_ == 0; }
-  INLINE(bool is_linked() const)  { return pos_ >  0; }
-
-  // Returns the position of bound or linked labels. Cannot be used
-  // for unused labels.
-  int pos() const;
-
- private:
-  // pos_ encodes both the binding state (via its sign)
-  // and the binding position (via its value) of a label.
-  //
-  // pos_ <  0  bound label, pos() returns the jump target position
-  // pos_ == 0  unused label
-  // pos_ >  0  linked label, pos() returns the last reference position
-  int pos_;
-
-  void bind_to(int pos)  {
-    pos_ = -pos - 1;
-    ASSERT(is_bound());
-  }
-  void link_to(int pos)  {
-    pos_ =  pos + 1;
-    ASSERT(is_linked());
-  }
-
-  friend class Assembler;
-  friend class RegexpAssembler;
-  friend class Displacement;
-  friend class ShadowTarget;
-  friend class RegExpMacroAssemblerIrregexp;
-};
-
-
-// -----------------------------------------------------------------------------
-// Relocation information
-
-
-// Relocation information consists of the address (pc) of the datum
-// to which the relocation information applies, the relocation mode
-// (rmode), and an optional data field. The relocation mode may be
-// "descriptive" and not indicate a need for relocation, but simply
-// describe a property of the datum. Such rmodes are useful for GC
-// and nice disassembly output.
-
-class RelocInfo BASE_EMBEDDED {
- public:
-  // The constant kNoPosition is used with the collecting of source positions
-  // in the relocation information. Two types of source positions are collected
-  // "position" (RelocMode position) and "statement position" (RelocMode
-  // statement_position). The "position" is collected at places in the source
-  // code which are of interest when making stack traces to pin-point the source
-  // location of a stack frame as close as possible. The "statement position" is
-  // collected at the beginning at each statement, and is used to indicate
-  // possible break locations. kNoPosition is used to indicate an
-  // invalid/uninitialized position value.
-  static const int kNoPosition = -1;
-
-  enum Mode {
-    // Please note the order is important (see IsCodeTarget, IsGCRelocMode).
-    CONSTRUCT_CALL,  // code target that is a call to a JavaScript constructor.
-    CODE_TARGET_CONTEXT,  // Code target used for contextual loads.
-    DEBUG_BREAK,  // Code target for the debugger statement.
-    CODE_TARGET,  // Code target which is not any of the above.
-    EMBEDDED_OBJECT,
-
-    // Everything after runtime_entry (inclusive) is not GC'ed.
-    RUNTIME_ENTRY,
-    JS_RETURN,  // Marks start of the ExitJSFrame code.
-    COMMENT,
-    POSITION,  // See comment for kNoPosition above.
-    STATEMENT_POSITION,  // See comment for kNoPosition above.
-    DEBUG_BREAK_SLOT,  // Additional code inserted for debug break slot.
-    EXTERNAL_REFERENCE,  // The address of an external C++ function.
-    INTERNAL_REFERENCE,  // An address inside the same function.
-
-    // add more as needed
-    // Pseudo-types
-    NUMBER_OF_MODES,  // must be no greater than 14 - see RelocInfoWriter
-    NONE,  // never recorded
-    LAST_CODE_ENUM = CODE_TARGET,
-    LAST_GCED_ENUM = EMBEDDED_OBJECT
-  };
-
-
-  RelocInfo() {}
-  RelocInfo(byte* pc, Mode rmode, intptr_t data)
-      : pc_(pc), rmode_(rmode), data_(data) {
-  }
-
-  static inline bool IsConstructCall(Mode mode) {
-    return mode == CONSTRUCT_CALL;
-  }
-  static inline bool IsCodeTarget(Mode mode) {
-    return mode <= LAST_CODE_ENUM;
-  }
-  // Is the relocation mode affected by GC?
-  static inline bool IsGCRelocMode(Mode mode) {
-    return mode <= LAST_GCED_ENUM;
-  }
-  static inline bool IsJSReturn(Mode mode) {
-    return mode == JS_RETURN;
-  }
-  static inline bool IsComment(Mode mode) {
-    return mode == COMMENT;
-  }
-  static inline bool IsPosition(Mode mode) {
-    return mode == POSITION || mode == STATEMENT_POSITION;
-  }
-  static inline bool IsStatementPosition(Mode mode) {
-    return mode == STATEMENT_POSITION;
-  }
-  static inline bool IsExternalReference(Mode mode) {
-    return mode == EXTERNAL_REFERENCE;
-  }
-  static inline bool IsInternalReference(Mode mode) {
-    return mode == INTERNAL_REFERENCE;
-  }
-  static inline bool IsDebugBreakSlot(Mode mode) {
-    return mode == DEBUG_BREAK_SLOT;
-  }
-  static inline int ModeMask(Mode mode) { return 1 << mode; }
-
-  // Accessors
-  byte* pc() const  { return pc_; }
-  void set_pc(byte* pc) { pc_ = pc; }
-  Mode rmode() const {  return rmode_; }
-  intptr_t data() const  { return data_; }
-
-  // Apply a relocation by delta bytes
-  INLINE(void apply(intptr_t delta));
-
-  // Is the pointer this relocation info refers to coded like a plain pointer
-  // or is it strange in some way (eg relative or patched into a series of
-  // instructions).
-  bool IsCodedSpecially();
-
-  // Read/modify the code target in the branch/call instruction
-  // this relocation applies to;
-  // can only be called if IsCodeTarget(rmode_) || rmode_ == RUNTIME_ENTRY
-  INLINE(Address target_address());
-  INLINE(void set_target_address(Address target));
-  INLINE(Object* target_object());
-  INLINE(Handle<Object> target_object_handle(Assembler* origin));
-  INLINE(Object** target_object_address());
-  INLINE(void set_target_object(Object* target));
-
-  // Read the address of the word containing the target_address in an
-  // instruction stream.  What this means exactly is architecture-independent.
-  // The only architecture-independent user of this function is the serializer.
-  // The serializer uses it to find out how many raw bytes of instruction to
-  // output before the next target.  Architecture-independent code shouldn't
-  // dereference the pointer it gets back from this.
-  INLINE(Address target_address_address());
-  // This indicates how much space a target takes up when deserializing a code
-  // stream.  For most architectures this is just the size of a pointer.  For
-  // an instruction like movw/movt where the target bits are mixed into the
-  // instruction bits the size of the target will be zero, indicating that the
-  // serializer should not step forwards in memory after a target is resolved
-  // and written.  In this case the target_address_address function above
-  // should return the end of the instructions to be patched, allowing the
-  // deserializer to deserialize the instructions as raw bytes and put them in
-  // place, ready to be patched with the target.
-  INLINE(int target_address_size());
-
-  // Read/modify the reference in the instruction this relocation
-  // applies to; can only be called if rmode_ is external_reference
-  INLINE(Address* target_reference_address());
-
-  // Read/modify the address of a call instruction. This is used to relocate
-  // the break points where straight-line code is patched with a call
-  // instruction.
-  INLINE(Address call_address());
-  INLINE(void set_call_address(Address target));
-  INLINE(Object* call_object());
-  INLINE(Object** call_object_address());
-  INLINE(void set_call_object(Object* target));
-
-  inline void Visit(ObjectVisitor* v);
-
-  // Patch the code with some other code.
-  void PatchCode(byte* instructions, int instruction_count);
-
-  // Patch the code with a call.
-  void PatchCodeWithCall(Address target, int guard_bytes);
-
-  // Check whether this return sequence has been patched
-  // with a call to the debugger.
-  INLINE(bool IsPatchedReturnSequence());
-
-  // Check whether this debug break slot has been patched with a call to the
-  // debugger.
-  INLINE(bool IsPatchedDebugBreakSlotSequence());
-
-#ifdef ENABLE_DISASSEMBLER
-  // Printing
-  static const char* RelocModeName(Mode rmode);
-  void Print();
-#endif  // ENABLE_DISASSEMBLER
-#ifdef DEBUG
-  // Debugging
-  void Verify();
-#endif
-
-  static const int kCodeTargetMask = (1 << (LAST_CODE_ENUM + 1)) - 1;
-  static const int kPositionMask = 1 << POSITION | 1 << STATEMENT_POSITION;
-  static const int kDebugMask = kPositionMask | 1 << COMMENT;
-  static const int kApplyMask;  // Modes affected by apply. Depends on arch.
-
- private:
-  // On ARM, note that pc_ is the address of the constant pool entry
-  // to be relocated and not the address of the instruction
-  // referencing the constant pool entry (except when rmode_ ==
-  // comment).
-  byte* pc_;
-  Mode rmode_;
-  intptr_t data_;
-  friend class RelocIterator;
-};
-
-
-// RelocInfoWriter serializes a stream of relocation info. It writes towards
-// lower addresses.
-class RelocInfoWriter BASE_EMBEDDED {
- public:
-  RelocInfoWriter() : pos_(NULL), last_pc_(NULL), last_data_(0) {}
-  RelocInfoWriter(byte* pos, byte* pc) : pos_(pos), last_pc_(pc),
-                                         last_data_(0) {}
-
-  byte* pos() const { return pos_; }
-  byte* last_pc() const { return last_pc_; }
-
-  void Write(const RelocInfo* rinfo);
-
-  // Update the state of the stream after reloc info buffer
-  // and/or code is moved while the stream is active.
-  void Reposition(byte* pos, byte* pc) {
-    pos_ = pos;
-    last_pc_ = pc;
-  }
-
-  // Max size (bytes) of a written RelocInfo. Longest encoding is
-  // ExtraTag, VariableLengthPCJump, ExtraTag, pc_delta, ExtraTag, data_delta.
-  // On ia32 and arm this is 1 + 4 + 1 + 1 + 1 + 4 = 12.
-  // On x64 this is 1 + 4 + 1 + 1 + 1 + 8 == 16;
-  // Here we use the maximum of the two.
-  static const int kMaxSize = 16;
-
- private:
-  inline uint32_t WriteVariableLengthPCJump(uint32_t pc_delta);
-  inline void WriteTaggedPC(uint32_t pc_delta, int tag);
-  inline void WriteExtraTaggedPC(uint32_t pc_delta, int extra_tag);
-  inline void WriteExtraTaggedData(intptr_t data_delta, int top_tag);
-  inline void WriteTaggedData(intptr_t data_delta, int tag);
-  inline void WriteExtraTag(int extra_tag, int top_tag);
-
-  byte* pos_;
-  byte* last_pc_;
-  intptr_t last_data_;
-  DISALLOW_COPY_AND_ASSIGN(RelocInfoWriter);
-};
-
-
-// A RelocIterator iterates over relocation information.
-// Typical use:
-//
-//   for (RelocIterator it(code); !it.done(); it.next()) {
-//     // do something with it.rinfo() here
-//   }
-//
-// A mask can be specified to skip unwanted modes.
-class RelocIterator: public Malloced {
- public:
-  // Create a new iterator positioned at
-  // the beginning of the reloc info.
-  // Relocation information with mode k is included in the
-  // iteration iff bit k of mode_mask is set.
-  explicit RelocIterator(Code* code, int mode_mask = -1);
-  explicit RelocIterator(const CodeDesc& desc, int mode_mask = -1);
-
-  // Iteration
-  bool done() const  { return done_; }
-  void next();
-
-  // Return pointer valid until next next().
-  RelocInfo* rinfo() {
-    ASSERT(!done());
-    return &rinfo_;
-  }
-
- private:
-  // Advance* moves the position before/after reading.
-  // *Read* reads from current byte(s) into rinfo_.
-  // *Get* just reads and returns info on current byte.
-  void Advance(int bytes = 1) { pos_ -= bytes; }
-  int AdvanceGetTag();
-  int GetExtraTag();
-  int GetTopTag();
-  void ReadTaggedPC();
-  void AdvanceReadPC();
-  void AdvanceReadData();
-  void AdvanceReadVariableLengthPCJump();
-  int GetPositionTypeTag();
-  void ReadTaggedData();
-
-  static RelocInfo::Mode DebugInfoModeFromTag(int tag);
-
-  // If the given mode is wanted, set it in rinfo_ and return true.
-  // Else return false. Used for efficiently skipping unwanted modes.
-  bool SetMode(RelocInfo::Mode mode) {
-    return (mode_mask_ & 1 << mode) ? (rinfo_.rmode_ = mode, true) : false;
-  }
-
-  byte* pos_;
-  byte* end_;
-  RelocInfo rinfo_;
-  bool done_;
-  int mode_mask_;
-  DISALLOW_COPY_AND_ASSIGN(RelocIterator);
-};
-
-
-//------------------------------------------------------------------------------
-// External function
-
-//----------------------------------------------------------------------------
-class IC_Utility;
-class SCTableReference;
-#ifdef ENABLE_DEBUGGER_SUPPORT
-class Debug_Address;
-#endif
-
-
-typedef void* ExternalReferenceRedirector(void* original, bool fp_return);
-
-
-// An ExternalReference represents a C++ address used in the generated
-// code. All references to C++ functions and variables must be encapsulated in
-// an ExternalReference instance. This is done in order to track the origin of
-// all external references in the code so that they can be bound to the correct
-// addresses when deserializing a heap.
-class ExternalReference BASE_EMBEDDED {
- public:
-  explicit ExternalReference(Builtins::CFunctionId id);
-
-  explicit ExternalReference(ApiFunction* ptr);
-
-  explicit ExternalReference(Builtins::Name name);
-
-  explicit ExternalReference(Runtime::FunctionId id);
-
-  explicit ExternalReference(Runtime::Function* f);
-
-  explicit ExternalReference(const IC_Utility& ic_utility);
-
-#ifdef ENABLE_DEBUGGER_SUPPORT
-  explicit ExternalReference(const Debug_Address& debug_address);
-#endif
-
-  explicit ExternalReference(StatsCounter* counter);
-
-  explicit ExternalReference(Top::AddressId id);
-
-  explicit ExternalReference(const SCTableReference& table_ref);
-
-  // One-of-a-kind references. These references are not part of a general
-  // pattern. This means that they have to be added to the
-  // ExternalReferenceTable in serialize.cc manually.
-
-  static ExternalReference perform_gc_function();
-  static ExternalReference fill_heap_number_with_random_function();
-  static ExternalReference random_uint32_function();
-  static ExternalReference transcendental_cache_array_address();
-
-  // Static data in the keyed lookup cache.
-  static ExternalReference keyed_lookup_cache_keys();
-  static ExternalReference keyed_lookup_cache_field_offsets();
-
-  // Static variable Factory::the_hole_value.location()
-  static ExternalReference the_hole_value_location();
-
-  // Static variable Heap::roots_address()
-  static ExternalReference roots_address();
-
-  // Static variable StackGuard::address_of_jslimit()
-  static ExternalReference address_of_stack_limit();
-
-  // Static variable StackGuard::address_of_real_jslimit()
-  static ExternalReference address_of_real_stack_limit();
-
-  // Static variable RegExpStack::limit_address()
-  static ExternalReference address_of_regexp_stack_limit();
-
-  // Static variables for RegExp.
-  static ExternalReference address_of_static_offsets_vector();
-  static ExternalReference address_of_regexp_stack_memory_address();
-  static ExternalReference address_of_regexp_stack_memory_size();
-
-  // Static variable Heap::NewSpaceStart()
-  static ExternalReference new_space_start();
-  static ExternalReference new_space_mask();
-  static ExternalReference heap_always_allocate_scope_depth();
-
-  // Used for fast allocation in generated code.
-  static ExternalReference new_space_allocation_top_address();
-  static ExternalReference new_space_allocation_limit_address();
-
-  static ExternalReference double_fp_operation(Token::Value operation);
-  static ExternalReference compare_doubles();
-
-  static ExternalReference handle_scope_extensions_address();
-  static ExternalReference handle_scope_next_address();
-  static ExternalReference handle_scope_limit_address();
-
-  static ExternalReference scheduled_exception_address();
-
-  Address address() const {return reinterpret_cast<Address>(address_);}
-
-#ifdef ENABLE_DEBUGGER_SUPPORT
-  // Function Debug::Break()
-  static ExternalReference debug_break();
-
-  // Used to check if single stepping is enabled in generated code.
-  static ExternalReference debug_step_in_fp_address();
-#endif
-
-#ifndef V8_INTERPRETED_REGEXP
-  // C functions called from RegExp generated code.
-
-  // Function NativeRegExpMacroAssembler::CaseInsensitiveCompareUC16()
-  static ExternalReference re_case_insensitive_compare_uc16();
-
-  // Function RegExpMacroAssembler*::CheckStackGuardState()
-  static ExternalReference re_check_stack_guard_state();
-
-  // Function NativeRegExpMacroAssembler::GrowStack()
-  static ExternalReference re_grow_stack();
-
-  // byte NativeRegExpMacroAssembler::word_character_bitmap
-  static ExternalReference re_word_character_map();
-
-#endif
-
-  // This lets you register a function that rewrites all external references.
-  // Used by the ARM simulator to catch calls to external references.
-  static void set_redirector(ExternalReferenceRedirector* redirector) {
-    ASSERT(redirector_ == NULL);  // We can't stack them.
-    redirector_ = redirector;
-  }
-
- private:
-  explicit ExternalReference(void* address)
-      : address_(address) {}
-
-  static ExternalReferenceRedirector* redirector_;
-
-  static void* Redirect(void* address, bool fp_return = false) {
-    if (redirector_ == NULL) return address;
-    void* answer = (*redirector_)(address, fp_return);
-    return answer;
-  }
-
-  static void* Redirect(Address address_arg, bool fp_return = false) {
-    void* address = reinterpret_cast<void*>(address_arg);
-    void* answer = (redirector_ == NULL) ?
-                   address :
-                   (*redirector_)(address, fp_return);
-    return answer;
-  }
-
-  void* address_;
-};
-
-
-// -----------------------------------------------------------------------------
-// Utility functions
-
-static inline bool is_intn(int x, int n)  {
-  return -(1 << (n-1)) <= x && x < (1 << (n-1));
-}
-
-static inline bool is_int8(int x)  { return is_intn(x, 8); }
-static inline bool is_int16(int x)  { return is_intn(x, 16); }
-static inline bool is_int18(int x)  { return is_intn(x, 18); }
-static inline bool is_int24(int x)  { return is_intn(x, 24); }
-
-static inline bool is_uintn(int x, int n) {
-  return (x & -(1 << n)) == 0;
-}
-
-static inline bool is_uint2(int x)  { return is_uintn(x, 2); }
-static inline bool is_uint3(int x)  { return is_uintn(x, 3); }
-static inline bool is_uint4(int x)  { return is_uintn(x, 4); }
-static inline bool is_uint5(int x)  { return is_uintn(x, 5); }
-static inline bool is_uint6(int x)  { return is_uintn(x, 6); }
-static inline bool is_uint8(int x)  { return is_uintn(x, 8); }
-static inline bool is_uint10(int x)  { return is_uintn(x, 10); }
-static inline bool is_uint12(int x)  { return is_uintn(x, 12); }
-static inline bool is_uint16(int x)  { return is_uintn(x, 16); }
-static inline bool is_uint24(int x)  { return is_uintn(x, 24); }
-static inline bool is_uint26(int x)  { return is_uintn(x, 26); }
-static inline bool is_uint28(int x)  { return is_uintn(x, 28); }
-
-static inline int NumberOfBitsSet(uint32_t x) {
-  unsigned int num_bits_set;
-  for (num_bits_set = 0; x; x >>= 1) {
-    num_bits_set += x & 1;
-  }
-  return num_bits_set;
-}
-
-} }  // namespace v8::internal
-
-#endif  // V8_ASSEMBLER_H_