stripe 13.6.0.pre.beta.1 → 14.0.0

data/rbi/stripe/resources/payment_method.rbi

@@ -54,6 +54,7 @@ module Stripe
       attr_reader :sort_code
     end
     class Bancontact < Stripe::StripeObject; end
+    class Billie < Stripe::StripeObject; end
     class BillingDetails < Stripe::StripeObject
       class Address < Stripe::StripeObject
         # City, district, suburb, town, or village.
@@ -554,22 +555,7 @@ module Stripe
       attr_reader :bank
     end
     class Giropay < Stripe::StripeObject; end
-    class Gopay < Stripe::StripeObject; end
     class Grabpay < Stripe::StripeObject; end
-    class IdBankTransfer < Stripe::StripeObject
-      # Attribute for field bank
-      sig { returns(T.nilable(String)) }
-      attr_reader :bank
-      # Attribute for field bank_code
-      sig { returns(T.nilable(String)) }
-      attr_reader :bank_code
-      # Attribute for field bank_name
-      sig { returns(T.nilable(String)) }
-      attr_reader :bank_name
-      # Attribute for field display_name
-      sig { returns(T.nilable(String)) }
-      attr_reader :display_name
-    end
     class Ideal < Stripe::StripeObject
       # The customer's bank, if provided. Can be one of `abn_amro`, `asn_bank`, `bunq`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`.
       sig { returns(T.nilable(String)) }
@@ -666,14 +652,36 @@ module Stripe
       sig { returns(String) }
       attr_reader :persistent_token
     end
-    class MbWay < Stripe::StripeObject; end
     class Mobilepay < Stripe::StripeObject; end
     class Multibanco < Stripe::StripeObject; end
     class NaverPay < Stripe::StripeObject
+      # Uniquely identifies this particular Naver Pay account. You can use this attribute to check whether two Naver Pay accounts are the same.
+      sig { returns(T.nilable(String)) }
+      attr_reader :buyer_id
       # Whether to fund this transaction with Naver Pay points or a card.
       sig { returns(String) }
       attr_reader :funding
     end
+    class NzBankAccount < Stripe::StripeObject
+      # The name on the bank account. Only present if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod’s billing details.
+      sig { returns(T.nilable(String)) }
+      attr_reader :account_holder_name
+      # The numeric code for the bank account's bank.
+      sig { returns(String) }
+      attr_reader :bank_code
+      # The name of the bank.
+      sig { returns(String) }
+      attr_reader :bank_name
+      # The numeric code for the bank account's bank branch.
+      sig { returns(String) }
+      attr_reader :branch_code
+      # Last four digits of the bank account number.
+      sig { returns(String) }
+      attr_reader :last4
+      # The suffix of the bank account number.
+      sig { returns(T.nilable(String)) }
+      attr_reader :suffix
+    end
     class Oxxo < Stripe::StripeObject; end
     class P24 < Stripe::StripeObject
       # The customer's bank, if provided.
@@ -687,9 +695,6 @@ module Stripe
       # Two-letter ISO code representing the buyer's country. Values are provided by PayPal directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
       sig { returns(T.nilable(String)) }
       attr_reader :country
-      # Uniquely identifies this particular PayPal account. You can use this attribute to check whether two PayPal accounts are the same.
-      sig { returns(T.nilable(String)) }
-      attr_reader :fingerprint
       # Owner's email. Values are provided by PayPal directly
       # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
       sig { returns(T.nilable(String)) }
@@ -697,48 +702,17 @@ module Stripe
       # PayPal account PayerID. This identifier uniquely identifies the PayPal customer.
       sig { returns(T.nilable(String)) }
       attr_reader :payer_id
-      # Owner's verified email. Values are verified or provided by PayPal directly
-      # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
-      sig { returns(T.nilable(String)) }
-      attr_reader :verified_email
-    end
-    class Payto < Stripe::StripeObject
-      # Bank-State-Branch number of the bank account.
-      sig { returns(T.nilable(String)) }
-      attr_reader :bsb_number
-      # Last four digits of the bank account number.
-      sig { returns(T.nilable(String)) }
-      attr_reader :last4
-      # The PayID alias for the bank account.
-      sig { returns(T.nilable(String)) }
-      attr_reader :pay_id
     end
     class Pix < Stripe::StripeObject; end
     class Promptpay < Stripe::StripeObject; end
-    class Qris < Stripe::StripeObject; end
     class RadarOptions < Stripe::StripeObject
       # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
       sig { returns(String) }
       attr_reader :session
     end
-    class Rechnung < Stripe::StripeObject
-      class Dob < Stripe::StripeObject
-        # The day of birth, between 1 and 31.
-        sig { returns(Integer) }
-        attr_reader :day
-        # The month of birth, between 1 and 12.
-        sig { returns(Integer) }
-        attr_reader :month
-        # The four-digit year of birth.
-        sig { returns(Integer) }
-        attr_reader :year
-      end
-      # Attribute for field dob
-      sig { returns(Dob) }
-      attr_reader :dob
-    end
     class RevolutPay < Stripe::StripeObject; end
     class SamsungPay < Stripe::StripeObject; end
+    class Satispay < Stripe::StripeObject; end
     class SepaDebit < Stripe::StripeObject
       class GeneratedFrom < Stripe::StripeObject
         # The ID of the Charge that generated this PaymentMethod, if any.
@@ -767,7 +741,6 @@ module Stripe
       sig { returns(T.nilable(String)) }
       attr_reader :last4
     end
-    class Shopeepay < Stripe::StripeObject; end
     class Sofort < Stripe::StripeObject
       # Two-letter ISO code representing the country the bank account is located in.
       sig { returns(T.nilable(String)) }
@@ -800,9 +773,6 @@ module Stripe
       # Account holder type: individual or company.
       sig { returns(T.nilable(String)) }
       attr_reader :account_holder_type
-      # Account number of the bank account.
-      sig { returns(T.nilable(String)) }
-      attr_reader :account_number
       # Account type: checkings or savings. Defaults to checking if omitted.
       sig { returns(T.nilable(String)) }
       attr_reader :account_type
@@ -860,6 +830,9 @@ module Stripe
     # Attribute for field bancontact
     sig { returns(Bancontact) }
     attr_reader :bancontact
+    # Attribute for field billie
+    sig { returns(Billie) }
+    attr_reader :billie
     # Attribute for field billing_details
     sig { returns(BillingDetails) }
     attr_reader :billing_details
@@ -896,18 +869,12 @@ module Stripe
     # Attribute for field giropay
     sig { returns(Giropay) }
     attr_reader :giropay
-    # Attribute for field gopay
-    sig { returns(Gopay) }
-    attr_reader :gopay
     # Attribute for field grabpay
     sig { returns(Grabpay) }
     attr_reader :grabpay
     # Unique identifier for the object.
     sig { returns(String) }
     attr_reader :id
-    # Attribute for field id_bank_transfer
-    sig { returns(IdBankTransfer) }
-    attr_reader :id_bank_transfer
     # Attribute for field ideal
     sig { returns(Ideal) }
     attr_reader :ideal
@@ -932,9 +899,6 @@ module Stripe
     # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
     sig { returns(T::Boolean) }
     attr_reader :livemode
-    # Attribute for field mb_way
-    sig { returns(MbWay) }
-    attr_reader :mb_way
     # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
     sig { returns(T.nilable(T::Hash[String, String])) }
     attr_reader :metadata
@@ -947,6 +911,9 @@ module Stripe
     # Attribute for field naver_pay
     sig { returns(NaverPay) }
     attr_reader :naver_pay
+    # Attribute for field nz_bank_account
+    sig { returns(NzBankAccount) }
+    attr_reader :nz_bank_account
     # String representing the object's type. Objects of the same type share the same value.
     sig { returns(String) }
     attr_reader :object
@@ -968,36 +935,27 @@ module Stripe
     # Attribute for field paypal
     sig { returns(Paypal) }
     attr_reader :paypal
-    # Attribute for field payto
-    sig { returns(Payto) }
-    attr_reader :payto
     # Attribute for field pix
     sig { returns(Pix) }
     attr_reader :pix
     # Attribute for field promptpay
     sig { returns(Promptpay) }
     attr_reader :promptpay
-    # Attribute for field qris
-    sig { returns(Qris) }
-    attr_reader :qris
     # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
     sig { returns(RadarOptions) }
     attr_reader :radar_options
-    # Attribute for field rechnung
-    sig { returns(Rechnung) }
-    attr_reader :rechnung
     # Attribute for field revolut_pay
     sig { returns(RevolutPay) }
     attr_reader :revolut_pay
     # Attribute for field samsung_pay
     sig { returns(SamsungPay) }
     attr_reader :samsung_pay
+    # Attribute for field satispay
+    sig { returns(Satispay) }
+    attr_reader :satispay
     # Attribute for field sepa_debit
     sig { returns(SepaDebit) }
     attr_reader :sepa_debit
-    # Attribute for field shopeepay
-    sig { returns(Shopeepay) }
-    attr_reader :shopeepay
     # Attribute for field sofort
     sig { returns(Sofort) }
     attr_reader :sofort
@@ -1021,25 +979,25 @@ module Stripe
     attr_reader :zip
     class ListParams < Stripe::RequestParams
       # The ID of the customer whose PaymentMethods will be retrieved.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :customer
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :ending_before
       # Specifies which fields in the response should be expanded.
-      sig { returns(T::Array[String]) }
+      sig { returns(T.nilable(T::Array[String])) }
       attr_accessor :expand
       # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      sig { returns(Integer) }
+      sig { returns(T.nilable(Integer)) }
       attr_accessor :limit
       # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :starting_after
       # An optional filter on the list, based on the object `type` field. Without the filter, the list includes all current and future payment method types. If your integration expects only one type of payment method in the response, make sure to provide a type value in the request.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :type
       sig {
-        params(customer: String, ending_before: String, expand: T::Array[String], limit: Integer, starting_after: String, type: String).void
+        params(customer: T.nilable(String), ending_before: T.nilable(String), expand: T.nilable(T::Array[String]), limit: T.nilable(Integer), starting_after: T.nilable(String), type: T.nilable(String)).void
        }
       def initialize(
         customer: nil,
@@ -1093,39 +1051,42 @@ module Stripe
       end
       class BacsDebit < Stripe::RequestParams
         # Account number of the bank account that the funds will be debited from.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_number
         # Sort code of the bank account. (e.g., `10-20-30`)
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :sort_code
-        sig { params(account_number: String, sort_code: String).void }
+        sig { params(account_number: T.nilable(String), sort_code: T.nilable(String)).void }
         def initialize(account_number: nil, sort_code: nil); end
       end
       class Bancontact < Stripe::RequestParams
 
+      end
+      class Billie < Stripe::RequestParams
+
       end
       class BillingDetails < Stripe::RequestParams
         class Address < Stripe::RequestParams
           # City, district, suburb, town, or village.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :city
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :country
           # Address line 1 (e.g., street, PO Box, or company name).
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :line1
           # Address line 2 (e.g., apartment, suite, unit, or building).
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :line2
           # ZIP or postal code.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :postal_code
           # State, county, province, or region.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :state
           sig {
-            params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
+            params(city: T.nilable(String), country: T.nilable(String), line1: T.nilable(String), line2: T.nilable(String), postal_code: T.nilable(String), state: T.nilable(String)).void
            }
           def initialize(
             city: nil,
@@ -1137,19 +1098,21 @@ module Stripe
           ); end
         end
         # Billing address.
-        sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::BillingDetails::Address)) }
+        sig {
+          returns(T.nilable(T.nilable(T.any(String, ::Stripe::PaymentMethod::CreateParams::BillingDetails::Address))))
+         }
         attr_accessor :address
         # Email address.
-        sig { returns(T.nilable(String)) }
+        sig { returns(T.nilable(T.nilable(String))) }
         attr_accessor :email
         # Full name.
-        sig { returns(T.nilable(String)) }
+        sig { returns(T.nilable(T.nilable(String))) }
         attr_accessor :name
         # Billing phone number (including extension).
-        sig { returns(T.nilable(String)) }
+        sig { returns(T.nilable(T.nilable(String))) }
         attr_accessor :phone
         sig {
-          params(address: T.nilable(::Stripe::PaymentMethod::CreateParams::BillingDetails::Address), email: T.nilable(String), name: T.nilable(String), phone: T.nilable(String)).void
+          params(address: T.nilable(T.nilable(T.any(String, ::Stripe::PaymentMethod::CreateParams::BillingDetails::Address))), email: T.nilable(T.nilable(String)), name: T.nilable(T.nilable(String)), phone: T.nilable(T.nilable(String))).void
          }
         def initialize(address: nil, email: nil, name: nil, phone: nil); end
       end
@@ -1166,31 +1129,31 @@ module Stripe
       class Card < Stripe::RequestParams
         class Networks < Stripe::RequestParams
           # The customer's preferred card network for co-branded cards. Supports `cartes_bancaires`, `mastercard`, or `visa`. Selection of a network that does not apply to the card will be stored as `invalid_preference` on the card.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :preferred
-          sig { params(preferred: String).void }
+          sig { params(preferred: T.nilable(String)).void }
           def initialize(preferred: nil); end
         end
         # The card's CVC. It is highly recommended to always include this value.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :cvc
         # Two-digit number representing the card's expiration month.
-        sig { returns(Integer) }
+        sig { returns(T.nilable(Integer)) }
         attr_accessor :exp_month
         # Four-digit number representing the card's expiration year.
-        sig { returns(Integer) }
+        sig { returns(T.nilable(Integer)) }
         attr_accessor :exp_year
         # Contains information about card networks used to process the payment.
-        sig { returns(::Stripe::PaymentMethod::CreateParams::Card::Networks) }
+        sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Card::Networks)) }
         attr_accessor :networks
         # The card number, as a string without any separators.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :number
         # For backwards compatibility, you can alternatively provide a Stripe token (e.g., for Apple Pay, Amex Express Checkout, or legacy Checkout) into the card hash with format card: {token: "tok_visa"}.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :token
         sig {
-          params(cvc: String, exp_month: Integer, exp_year: Integer, networks: ::Stripe::PaymentMethod::CreateParams::Card::Networks, number: String, token: String).void
+          params(cvc: T.nilable(String), exp_month: T.nilable(Integer), exp_year: T.nilable(Integer), networks: T.nilable(::Stripe::PaymentMethod::CreateParams::Card::Networks), number: T.nilable(String), token: T.nilable(String)).void
          }
         def initialize(
           cvc: nil,
@@ -1209,42 +1172,32 @@ module Stripe
       end
       class Eps < Stripe::RequestParams
         # The customer's bank.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :bank
-        sig { params(bank: String).void }
+        sig { params(bank: T.nilable(String)).void }
         def initialize(bank: nil); end
       end
       class Fpx < Stripe::RequestParams
         # Account holder type for FPX transaction
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_holder_type
         # The customer's bank.
         sig { returns(String) }
         attr_accessor :bank
-        sig { params(account_holder_type: String, bank: String).void }
+        sig { params(account_holder_type: T.nilable(String), bank: String).void }
         def initialize(account_holder_type: nil, bank: nil); end
       end
       class Giropay < Stripe::RequestParams
 
-      end
-      class Gopay < Stripe::RequestParams
-
       end
       class Grabpay < Stripe::RequestParams
 
-      end
-      class IdBankTransfer < Stripe::RequestParams
-        # Bank where the account is held.
-        sig { returns(String) }
-        attr_accessor :bank
-        sig { params(bank: String).void }
-        def initialize(bank: nil); end
       end
       class Ideal < Stripe::RequestParams
         # The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :bank
-        sig { params(bank: String).void }
+        sig { params(bank: T.nilable(String)).void }
         def initialize(bank: nil); end
       end
       class InteracPresent < Stripe::RequestParams
@@ -1268,9 +1221,9 @@ module Stripe
           def initialize(day: nil, month: nil, year: nil); end
         end
         # Customer's date of birth
-        sig { returns(::Stripe::PaymentMethod::CreateParams::Klarna::Dob) }
+        sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Klarna::Dob)) }
         attr_accessor :dob
-        sig { params(dob: ::Stripe::PaymentMethod::CreateParams::Klarna::Dob).void }
+        sig { params(dob: T.nilable(::Stripe::PaymentMethod::CreateParams::Klarna::Dob)).void }
         def initialize(dob: nil); end
       end
       class Konbini < Stripe::RequestParams
@@ -1281,9 +1234,6 @@ module Stripe
       end
       class Link < Stripe::RequestParams
 
-      end
-      class MbWay < Stripe::RequestParams
-
       end
       class Mobilepay < Stripe::RequestParams
 
@@ -1293,19 +1243,50 @@ module Stripe
       end
       class NaverPay < Stripe::RequestParams
         # Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :funding
-        sig { params(funding: String).void }
+        sig { params(funding: T.nilable(String)).void }
         def initialize(funding: nil); end
       end
+      class NzBankAccount < Stripe::RequestParams
+        # The name on the bank account. Only required if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod’s billing details.
+        sig { returns(T.nilable(String)) }
+        attr_accessor :account_holder_name
+        # The account number for the bank account.
+        sig { returns(String) }
+        attr_accessor :account_number
+        # The numeric code for the bank account's bank.
+        sig { returns(String) }
+        attr_accessor :bank_code
+        # The numeric code for the bank account's bank branch.
+        sig { returns(String) }
+        attr_accessor :branch_code
+        # Attribute for param field reference
+        sig { returns(T.nilable(String)) }
+        attr_accessor :reference
+        # The suffix of the bank account number.
+        sig { returns(String) }
+        attr_accessor :suffix
+        sig {
+          params(account_holder_name: T.nilable(String), account_number: String, bank_code: String, branch_code: String, reference: T.nilable(String), suffix: String).void
+         }
+        def initialize(
+          account_holder_name: nil,
+          account_number: nil,
+          bank_code: nil,
+          branch_code: nil,
+          reference: nil,
+          suffix: nil
+        ); end
+      end
       class Oxxo < Stripe::RequestParams
 
       end
       class P24 < Stripe::RequestParams
         # The customer's bank.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :bank
-        sig { params(bank: String).void }
+        sig { params(bank: T.nilable(String)).void }
         def initialize(bank: nil); end
       end
       class PayByBank < Stripe::RequestParams
@@ -1319,61 +1300,28 @@ module Stripe
       end
       class Paypal < Stripe::RequestParams
 
-      end
-      class Payto < Stripe::RequestParams
-        # The account number for the bank account.
-        sig { returns(String) }
-        attr_accessor :account_number
-        # Bank-State-Branch number of the bank account.
-        sig { returns(String) }
-        attr_accessor :bsb_number
-        # The PayID alias for the bank account.
-        sig { returns(String) }
-        attr_accessor :pay_id
-        sig { params(account_number: String, bsb_number: String, pay_id: String).void }
-        def initialize(account_number: nil, bsb_number: nil, pay_id: nil); end
       end
       class Pix < Stripe::RequestParams
 
       end
       class Promptpay < Stripe::RequestParams
 
-      end
-      class Qris < Stripe::RequestParams
-
       end
       class RadarOptions < Stripe::RequestParams
         # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :session
-        sig { params(session: String).void }
+        sig { params(session: T.nilable(String)).void }
         def initialize(session: nil); end
       end
-      class Rechnung < Stripe::RequestParams
-        class Dob < Stripe::RequestParams
-          # The day of birth, between 1 and 31.
-          sig { returns(Integer) }
-          attr_accessor :day
-          # The month of birth, between 1 and 12.
-          sig { returns(Integer) }
-          attr_accessor :month
-          # The four-digit year of birth.
-          sig { returns(Integer) }
-          attr_accessor :year
-          sig { params(day: Integer, month: Integer, year: Integer).void }
-          def initialize(day: nil, month: nil, year: nil); end
-        end
-        # Customer's date of birth
-        sig { returns(::Stripe::PaymentMethod::CreateParams::Rechnung::Dob) }
-        attr_accessor :dob
-        sig { params(dob: ::Stripe::PaymentMethod::CreateParams::Rechnung::Dob).void }
-        def initialize(dob: nil); end
-      end
       class RevolutPay < Stripe::RequestParams
 
       end
       class SamsungPay < Stripe::RequestParams
 
+      end
+      class Satispay < Stripe::RequestParams
+
       end
       class SepaDebit < Stripe::RequestParams
         # IBAN of the bank account.
@@ -1381,9 +1329,6 @@ module Stripe
         attr_accessor :iban
         sig { params(iban: String).void }
         def initialize(iban: nil); end
-      end
-      class Shopeepay < Stripe::RequestParams
-
       end
       class Sofort < Stripe::RequestParams
         # Two-letter ISO code representing the country the bank account is located in.
@@ -1400,22 +1345,22 @@ module Stripe
       end
       class UsBankAccount < Stripe::RequestParams
         # Account holder type: individual or company.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_holder_type
         # Account number of the bank account.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_number
         # Account type: checkings or savings. Defaults to checking if omitted.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_type
         # The ID of a Financial Connections Account to use as a payment method.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :financial_connections_account
         # Routing number of the bank account.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :routing_number
         sig {
-          params(account_holder_type: String, account_number: String, account_type: String, financial_connections_account: String, routing_number: String).void
+          params(account_holder_type: T.nilable(String), account_number: T.nilable(String), account_type: T.nilable(String), financial_connections_account: T.nilable(String), routing_number: T.nilable(String)).void
          }
         def initialize(
           account_holder_type: nil,
@@ -1432,187 +1377,175 @@ module Stripe
 
       end
       # If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::AcssDebit) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::AcssDebit)) }
       attr_accessor :acss_debit
       # If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Affirm) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Affirm)) }
       attr_accessor :affirm
       # If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::AfterpayClearpay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::AfterpayClearpay)) }
       attr_accessor :afterpay_clearpay
       # If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Alipay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Alipay)) }
       attr_accessor :alipay
       # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :allow_redisplay
       # If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Alma) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Alma)) }
       attr_accessor :alma
       # If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::AmazonPay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::AmazonPay)) }
       attr_accessor :amazon_pay
       # If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::AuBecsDebit) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::AuBecsDebit)) }
       attr_accessor :au_becs_debit
       # If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::BacsDebit) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::BacsDebit)) }
       attr_accessor :bacs_debit
       # If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Bancontact) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Bancontact)) }
       attr_accessor :bancontact
+      # If this is a `billie` PaymentMethod, this hash contains details about the billie payment method.
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Billie)) }
+      attr_accessor :billie
       # Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::BillingDetails) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::BillingDetails)) }
       attr_accessor :billing_details
       # If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Blik) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Blik)) }
       attr_accessor :blik
       # If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Boleto) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Boleto)) }
       attr_accessor :boleto
       # If this is a `card` PaymentMethod, this hash contains the user's card details. For backwards compatibility, you can alternatively provide a Stripe token (e.g., for Apple Pay, Amex Express Checkout, or legacy Checkout) into the card hash with format `card: {token: "tok_visa"}`. When providing a card number, you must meet the requirements for [PCI compliance](https://stripe.com/docs/security#validating-pci-compliance). We strongly recommend using Stripe.js instead of interacting with this API directly.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Card) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Card)) }
       attr_accessor :card
       # If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Cashapp) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Cashapp)) }
       attr_accessor :cashapp
       # The `Customer` to whom the original PaymentMethod is attached.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :customer
       # If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::CustomerBalance) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::CustomerBalance)) }
       attr_accessor :customer_balance
       # If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Eps) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Eps)) }
       attr_accessor :eps
       # Specifies which fields in the response should be expanded.
-      sig { returns(T::Array[String]) }
+      sig { returns(T.nilable(T::Array[String])) }
       attr_accessor :expand
       # If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Fpx) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Fpx)) }
       attr_accessor :fpx
       # If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Giropay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Giropay)) }
       attr_accessor :giropay
-      # If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Gopay) }
-      attr_accessor :gopay
       # If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Grabpay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Grabpay)) }
       attr_accessor :grabpay
-      # If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::IdBankTransfer) }
-      attr_accessor :id_bank_transfer
       # If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Ideal) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Ideal)) }
       attr_accessor :ideal
       # If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::InteracPresent) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::InteracPresent)) }
       attr_accessor :interac_present
       # If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::KakaoPay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::KakaoPay)) }
       attr_accessor :kakao_pay
       # If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Klarna) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Klarna)) }
       attr_accessor :klarna
       # If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Konbini) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Konbini)) }
       attr_accessor :konbini
       # If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::KrCard) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::KrCard)) }
       attr_accessor :kr_card
       # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Link) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Link)) }
       attr_accessor :link
-      # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::MbWay) }
-      attr_accessor :mb_way
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      sig { returns(T::Hash[String, String]) }
+      sig { returns(T.nilable(T::Hash[String, String])) }
       attr_accessor :metadata
       # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Mobilepay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Mobilepay)) }
       attr_accessor :mobilepay
       # If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Multibanco) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Multibanco)) }
       attr_accessor :multibanco
       # If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::NaverPay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::NaverPay)) }
       attr_accessor :naver_pay
+      # If this is an nz_bank_account PaymentMethod, this hash contains details about the nz_bank_account payment method.
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::NzBankAccount)) }
+      attr_accessor :nz_bank_account
       # If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Oxxo) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Oxxo)) }
       attr_accessor :oxxo
       # If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::P24) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::P24)) }
       attr_accessor :p24
       # If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::PayByBank) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::PayByBank)) }
       attr_accessor :pay_by_bank
       # If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Payco) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Payco)) }
       attr_accessor :payco
       # The PaymentMethod to share.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :payment_method
       # If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Paynow) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Paynow)) }
       attr_accessor :paynow
       # If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Paypal) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Paypal)) }
       attr_accessor :paypal
-      # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Payto) }
-      attr_accessor :payto
       # If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Pix) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Pix)) }
       attr_accessor :pix
       # If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Promptpay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Promptpay)) }
       attr_accessor :promptpay
-      # If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Qris) }
-      attr_accessor :qris
       # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::RadarOptions) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::RadarOptions)) }
       attr_accessor :radar_options
-      # If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Rechnung) }
-      attr_accessor :rechnung
       # If this is a `Revolut Pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::RevolutPay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::RevolutPay)) }
       attr_accessor :revolut_pay
       # If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::SamsungPay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::SamsungPay)) }
       attr_accessor :samsung_pay
+      # If this is a `satispay` PaymentMethod, this hash contains details about the satispay payment method.
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Satispay)) }
+      attr_accessor :satispay
       # If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::SepaDebit) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::SepaDebit)) }
       attr_accessor :sepa_debit
-      # If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Shopeepay) }
-      attr_accessor :shopeepay
       # If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Sofort) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Sofort)) }
       attr_accessor :sofort
       # If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Swish) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Swish)) }
       attr_accessor :swish
       # If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Twint) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Twint)) }
       attr_accessor :twint
       # The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :type
       # If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::UsBankAccount) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::UsBankAccount)) }
       attr_accessor :us_bank_account
       # If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::WechatPay) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::WechatPay)) }
       attr_accessor :wechat_pay
       # If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
-      sig { returns(::Stripe::PaymentMethod::CreateParams::Zip) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::CreateParams::Zip)) }
       attr_accessor :zip
       sig {
-        params(acss_debit: ::Stripe::PaymentMethod::CreateParams::AcssDebit, affirm: ::Stripe::PaymentMethod::CreateParams::Affirm, afterpay_clearpay: ::Stripe::PaymentMethod::CreateParams::AfterpayClearpay, alipay: ::Stripe::PaymentMethod::CreateParams::Alipay, allow_redisplay: String, alma: ::Stripe::PaymentMethod::CreateParams::Alma, amazon_pay: ::Stripe::PaymentMethod::CreateParams::AmazonPay, au_becs_debit: ::Stripe::PaymentMethod::CreateParams::AuBecsDebit, bacs_debit: ::Stripe::PaymentMethod::CreateParams::BacsDebit, bancontact: ::Stripe::PaymentMethod::CreateParams::Bancontact, billing_details: ::Stripe::PaymentMethod::CreateParams::BillingDetails, blik: ::Stripe::PaymentMethod::CreateParams::Blik, boleto: ::Stripe::PaymentMethod::CreateParams::Boleto, card: ::Stripe::PaymentMethod::CreateParams::Card, cashapp: ::Stripe::PaymentMethod::CreateParams::Cashapp, customer: String, customer_balance: ::Stripe::PaymentMethod::CreateParams::CustomerBalance, eps: ::Stripe::PaymentMethod::CreateParams::Eps, expand: T::Array[String], fpx: ::Stripe::PaymentMethod::CreateParams::Fpx, giropay: ::Stripe::PaymentMethod::CreateParams::Giropay, gopay: ::Stripe::PaymentMethod::CreateParams::Gopay, grabpay: ::Stripe::PaymentMethod::CreateParams::Grabpay, id_bank_transfer: ::Stripe::PaymentMethod::CreateParams::IdBankTransfer, ideal: ::Stripe::PaymentMethod::CreateParams::Ideal, interac_present: ::Stripe::PaymentMethod::CreateParams::InteracPresent, kakao_pay: ::Stripe::PaymentMethod::CreateParams::KakaoPay, klarna: ::Stripe::PaymentMethod::CreateParams::Klarna, konbini: ::Stripe::PaymentMethod::CreateParams::Konbini, kr_card: ::Stripe::PaymentMethod::CreateParams::KrCard, link: ::Stripe::PaymentMethod::CreateParams::Link, mb_way: ::Stripe::PaymentMethod::CreateParams::MbWay, metadata: T::Hash[String, String], mobilepay: ::Stripe::PaymentMethod::CreateParams::Mobilepay, multibanco: ::Stripe::PaymentMethod::CreateParams::Multibanco, naver_pay: ::Stripe::PaymentMethod::CreateParams::NaverPay, oxxo: ::Stripe::PaymentMethod::CreateParams::Oxxo, p24: ::Stripe::PaymentMethod::CreateParams::P24, pay_by_bank: ::Stripe::PaymentMethod::CreateParams::PayByBank, payco: ::Stripe::PaymentMethod::CreateParams::Payco, payment_method: String, paynow: ::Stripe::PaymentMethod::CreateParams::Paynow, paypal: ::Stripe::PaymentMethod::CreateParams::Paypal, payto: ::Stripe::PaymentMethod::CreateParams::Payto, pix: ::Stripe::PaymentMethod::CreateParams::Pix, promptpay: ::Stripe::PaymentMethod::CreateParams::Promptpay, qris: ::Stripe::PaymentMethod::CreateParams::Qris, radar_options: ::Stripe::PaymentMethod::CreateParams::RadarOptions, rechnung: ::Stripe::PaymentMethod::CreateParams::Rechnung, revolut_pay: ::Stripe::PaymentMethod::CreateParams::RevolutPay, samsung_pay: ::Stripe::PaymentMethod::CreateParams::SamsungPay, sepa_debit: ::Stripe::PaymentMethod::CreateParams::SepaDebit, shopeepay: ::Stripe::PaymentMethod::CreateParams::Shopeepay, sofort: ::Stripe::PaymentMethod::CreateParams::Sofort, swish: ::Stripe::PaymentMethod::CreateParams::Swish, twint: ::Stripe::PaymentMethod::CreateParams::Twint, type: String, us_bank_account: ::Stripe::PaymentMethod::CreateParams::UsBankAccount, wechat_pay: ::Stripe::PaymentMethod::CreateParams::WechatPay, zip: ::Stripe::PaymentMethod::CreateParams::Zip).void
+        params(acss_debit: T.nilable(::Stripe::PaymentMethod::CreateParams::AcssDebit), affirm: T.nilable(::Stripe::PaymentMethod::CreateParams::Affirm), afterpay_clearpay: T.nilable(::Stripe::PaymentMethod::CreateParams::AfterpayClearpay), alipay: T.nilable(::Stripe::PaymentMethod::CreateParams::Alipay), allow_redisplay: T.nilable(String), alma: T.nilable(::Stripe::PaymentMethod::CreateParams::Alma), amazon_pay: T.nilable(::Stripe::PaymentMethod::CreateParams::AmazonPay), au_becs_debit: T.nilable(::Stripe::PaymentMethod::CreateParams::AuBecsDebit), bacs_debit: T.nilable(::Stripe::PaymentMethod::CreateParams::BacsDebit), bancontact: T.nilable(::Stripe::PaymentMethod::CreateParams::Bancontact), billie: T.nilable(::Stripe::PaymentMethod::CreateParams::Billie), billing_details: T.nilable(::Stripe::PaymentMethod::CreateParams::BillingDetails), blik: T.nilable(::Stripe::PaymentMethod::CreateParams::Blik), boleto: T.nilable(::Stripe::PaymentMethod::CreateParams::Boleto), card: T.nilable(::Stripe::PaymentMethod::CreateParams::Card), cashapp: T.nilable(::Stripe::PaymentMethod::CreateParams::Cashapp), customer: T.nilable(String), customer_balance: T.nilable(::Stripe::PaymentMethod::CreateParams::CustomerBalance), eps: T.nilable(::Stripe::PaymentMethod::CreateParams::Eps), expand: T.nilable(T::Array[String]), fpx: T.nilable(::Stripe::PaymentMethod::CreateParams::Fpx), giropay: T.nilable(::Stripe::PaymentMethod::CreateParams::Giropay), grabpay: T.nilable(::Stripe::PaymentMethod::CreateParams::Grabpay), ideal: T.nilable(::Stripe::PaymentMethod::CreateParams::Ideal), interac_present: T.nilable(::Stripe::PaymentMethod::CreateParams::InteracPresent), kakao_pay: T.nilable(::Stripe::PaymentMethod::CreateParams::KakaoPay), klarna: T.nilable(::Stripe::PaymentMethod::CreateParams::Klarna), konbini: T.nilable(::Stripe::PaymentMethod::CreateParams::Konbini), kr_card: T.nilable(::Stripe::PaymentMethod::CreateParams::KrCard), link: T.nilable(::Stripe::PaymentMethod::CreateParams::Link), metadata: T.nilable(T::Hash[String, String]), mobilepay: T.nilable(::Stripe::PaymentMethod::CreateParams::Mobilepay), multibanco: T.nilable(::Stripe::PaymentMethod::CreateParams::Multibanco), naver_pay: T.nilable(::Stripe::PaymentMethod::CreateParams::NaverPay), nz_bank_account: T.nilable(::Stripe::PaymentMethod::CreateParams::NzBankAccount), oxxo: T.nilable(::Stripe::PaymentMethod::CreateParams::Oxxo), p24: T.nilable(::Stripe::PaymentMethod::CreateParams::P24), pay_by_bank: T.nilable(::Stripe::PaymentMethod::CreateParams::PayByBank), payco: T.nilable(::Stripe::PaymentMethod::CreateParams::Payco), payment_method: T.nilable(String), paynow: T.nilable(::Stripe::PaymentMethod::CreateParams::Paynow), paypal: T.nilable(::Stripe::PaymentMethod::CreateParams::Paypal), pix: T.nilable(::Stripe::PaymentMethod::CreateParams::Pix), promptpay: T.nilable(::Stripe::PaymentMethod::CreateParams::Promptpay), radar_options: T.nilable(::Stripe::PaymentMethod::CreateParams::RadarOptions), revolut_pay: T.nilable(::Stripe::PaymentMethod::CreateParams::RevolutPay), samsung_pay: T.nilable(::Stripe::PaymentMethod::CreateParams::SamsungPay), satispay: T.nilable(::Stripe::PaymentMethod::CreateParams::Satispay), sepa_debit: T.nilable(::Stripe::PaymentMethod::CreateParams::SepaDebit), sofort: T.nilable(::Stripe::PaymentMethod::CreateParams::Sofort), swish: T.nilable(::Stripe::PaymentMethod::CreateParams::Swish), twint: T.nilable(::Stripe::PaymentMethod::CreateParams::Twint), type: T.nilable(String), us_bank_account: T.nilable(::Stripe::PaymentMethod::CreateParams::UsBankAccount), wechat_pay: T.nilable(::Stripe::PaymentMethod::CreateParams::WechatPay), zip: T.nilable(::Stripe::PaymentMethod::CreateParams::Zip)).void
        }
       def initialize(
         acss_debit: nil,
@@ -1625,6 +1558,7 @@ module Stripe
         au_becs_debit: nil,
         bacs_debit: nil,
         bancontact: nil,
+        billie: nil,
         billing_details: nil,
         blik: nil,
         boleto: nil,
@@ -1636,9 +1570,7 @@ module Stripe
         expand: nil,
         fpx: nil,
         giropay: nil,
-        gopay: nil,
         grabpay: nil,
-        id_bank_transfer: nil,
         ideal: nil,
         interac_present: nil,
         kakao_pay: nil,
@@ -1646,11 +1578,11 @@ module Stripe
         konbini: nil,
         kr_card: nil,
         link: nil,
-        mb_way: nil,
         metadata: nil,
         mobilepay: nil,
         multibanco: nil,
         naver_pay: nil,
+        nz_bank_account: nil,
         oxxo: nil,
         p24: nil,
         pay_by_bank: nil,
@@ -1658,16 +1590,13 @@ module Stripe
         payment_method: nil,
         paynow: nil,
         paypal: nil,
-        payto: nil,
         pix: nil,
         promptpay: nil,
-        qris: nil,
         radar_options: nil,
-        rechnung: nil,
         revolut_pay: nil,
         samsung_pay: nil,
+        satispay: nil,
         sepa_debit: nil,
-        shopeepay: nil,
         sofort: nil,
         swish: nil,
         twint: nil,
@@ -1677,36 +1606,29 @@ module Stripe
         zip: nil
       ); end
     end
-    class RetrieveParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      sig { returns(T::Array[String]) }
-      attr_accessor :expand
-      sig { params(expand: T::Array[String]).void }
-      def initialize(expand: nil); end
-    end
     class UpdateParams < Stripe::RequestParams
       class BillingDetails < Stripe::RequestParams
         class Address < Stripe::RequestParams
           # City, district, suburb, town, or village.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :city
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :country
           # Address line 1 (e.g., street, PO Box, or company name).
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :line1
           # Address line 2 (e.g., apartment, suite, unit, or building).
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :line2
           # ZIP or postal code.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :postal_code
           # State, county, province, or region.
-          sig { returns(String) }
+          sig { returns(T.nilable(String)) }
           attr_accessor :state
           sig {
-            params(city: String, country: String, line1: String, line2: String, postal_code: String, state: String).void
+            params(city: T.nilable(String), country: T.nilable(String), line1: T.nilable(String), line2: T.nilable(String), postal_code: T.nilable(String), state: T.nilable(String)).void
            }
           def initialize(
             city: nil,
@@ -1718,112 +1640,88 @@ module Stripe
           ); end
         end
         # Billing address.
-        sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::BillingDetails::Address)) }
+        sig {
+          returns(T.nilable(T.nilable(T.any(String, ::Stripe::PaymentMethod::UpdateParams::BillingDetails::Address))))
+         }
         attr_accessor :address
         # Email address.
-        sig { returns(T.nilable(String)) }
+        sig { returns(T.nilable(T.nilable(String))) }
         attr_accessor :email
         # Full name.
-        sig { returns(T.nilable(String)) }
+        sig { returns(T.nilable(T.nilable(String))) }
         attr_accessor :name
         # Billing phone number (including extension).
-        sig { returns(T.nilable(String)) }
+        sig { returns(T.nilable(T.nilable(String))) }
         attr_accessor :phone
         sig {
-          params(address: T.nilable(::Stripe::PaymentMethod::UpdateParams::BillingDetails::Address), email: T.nilable(String), name: T.nilable(String), phone: T.nilable(String)).void
+          params(address: T.nilable(T.nilable(T.any(String, ::Stripe::PaymentMethod::UpdateParams::BillingDetails::Address))), email: T.nilable(T.nilable(String)), name: T.nilable(T.nilable(String)), phone: T.nilable(T.nilable(String))).void
          }
         def initialize(address: nil, email: nil, name: nil, phone: nil); end
       end
       class Card < Stripe::RequestParams
         class Networks < Stripe::RequestParams
           # The customer's preferred card network for co-branded cards. Supports `cartes_bancaires`, `mastercard`, or `visa`. Selection of a network that does not apply to the card will be stored as `invalid_preference` on the card.
-          sig { returns(T.nilable(String)) }
+          sig { returns(T.nilable(T.nilable(T.any(String, String)))) }
           attr_accessor :preferred
-          sig { params(preferred: T.nilable(String)).void }
+          sig { params(preferred: T.nilable(T.nilable(T.any(String, String)))).void }
           def initialize(preferred: nil); end
         end
         # Two-digit number representing the card's expiration month.
-        sig { returns(Integer) }
+        sig { returns(T.nilable(Integer)) }
         attr_accessor :exp_month
         # Four-digit number representing the card's expiration year.
-        sig { returns(Integer) }
+        sig { returns(T.nilable(Integer)) }
         attr_accessor :exp_year
         # Contains information about card networks used to process the payment.
-        sig { returns(::Stripe::PaymentMethod::UpdateParams::Card::Networks) }
+        sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::Card::Networks)) }
         attr_accessor :networks
         sig {
-          params(exp_month: Integer, exp_year: Integer, networks: ::Stripe::PaymentMethod::UpdateParams::Card::Networks).void
+          params(exp_month: T.nilable(Integer), exp_year: T.nilable(Integer), networks: T.nilable(::Stripe::PaymentMethod::UpdateParams::Card::Networks)).void
          }
         def initialize(exp_month: nil, exp_year: nil, networks: nil); end
       end
       class Link < Stripe::RequestParams
 
-      end
-      class NaverPay < Stripe::RequestParams
-        # Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
-        sig { returns(String) }
-        attr_accessor :funding
-        sig { params(funding: String).void }
-        def initialize(funding: nil); end
       end
       class PayByBank < Stripe::RequestParams
 
-      end
-      class Payto < Stripe::RequestParams
-        # The account number for the bank account.
-        sig { returns(String) }
-        attr_accessor :account_number
-        # Bank-State-Branch number of the bank account.
-        sig { returns(String) }
-        attr_accessor :bsb_number
-        # The PayID alias for the bank account.
-        sig { returns(String) }
-        attr_accessor :pay_id
-        sig { params(account_number: String, bsb_number: String, pay_id: String).void }
-        def initialize(account_number: nil, bsb_number: nil, pay_id: nil); end
       end
       class UsBankAccount < Stripe::RequestParams
         # Bank account holder type.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_holder_type
         # Bank account type.
-        sig { returns(String) }
+        sig { returns(T.nilable(String)) }
         attr_accessor :account_type
-        sig { params(account_holder_type: String, account_type: String).void }
+        sig { params(account_holder_type: T.nilable(String), account_type: T.nilable(String)).void }
         def initialize(account_holder_type: nil, account_type: nil); end
       end
       # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
-      sig { returns(String) }
+      sig { returns(T.nilable(String)) }
       attr_accessor :allow_redisplay
       # Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::BillingDetails) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::BillingDetails)) }
       attr_accessor :billing_details
       # If this is a `card` PaymentMethod, this hash contains the user's card details.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::Card) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::Card)) }
       attr_accessor :card
       # Specifies which fields in the response should be expanded.
-      sig { returns(T::Array[String]) }
+      sig { returns(T.nilable(T::Array[String])) }
       attr_accessor :expand
       # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::Link) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::Link)) }
       attr_accessor :link
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      sig { returns(T.nilable(T::Hash[String, String])) }
+      sig { returns(T.nilable(T.nilable(T.any(String, T::Hash[String, String])))) }
       attr_accessor :metadata
-      # If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::NaverPay) }
-      attr_accessor :naver_pay
       # If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::PayByBank) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::PayByBank)) }
       attr_accessor :pay_by_bank
-      # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::Payto) }
-      attr_accessor :payto
       # If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
-      sig { returns(::Stripe::PaymentMethod::UpdateParams::UsBankAccount) }
+      sig { returns(T.nilable(::Stripe::PaymentMethod::UpdateParams::UsBankAccount)) }
       attr_accessor :us_bank_account
       sig {
-        params(allow_redisplay: String, billing_details: ::Stripe::PaymentMethod::UpdateParams::BillingDetails, card: ::Stripe::PaymentMethod::UpdateParams::Card, expand: T::Array[String], link: ::Stripe::PaymentMethod::UpdateParams::Link, metadata: T.nilable(T::Hash[String, String]), naver_pay: ::Stripe::PaymentMethod::UpdateParams::NaverPay, pay_by_bank: ::Stripe::PaymentMethod::UpdateParams::PayByBank, payto: ::Stripe::PaymentMethod::UpdateParams::Payto, us_bank_account: ::Stripe::PaymentMethod::UpdateParams::UsBankAccount).void
+        params(allow_redisplay: T.nilable(String), billing_details: T.nilable(::Stripe::PaymentMethod::UpdateParams::BillingDetails), card: T.nilable(::Stripe::PaymentMethod::UpdateParams::Card), expand: T.nilable(T::Array[String]), link: T.nilable(::Stripe::PaymentMethod::UpdateParams::Link), metadata: T.nilable(T.nilable(T.any(String, T::Hash[String, String]))), pay_by_bank: T.nilable(::Stripe::PaymentMethod::UpdateParams::PayByBank), us_bank_account: T.nilable(::Stripe::PaymentMethod::UpdateParams::UsBankAccount)).void
        }
       def initialize(
         allow_redisplay: nil,
@@ -1832,9 +1730,7 @@ module Stripe
         expand: nil,
         link: nil,
         metadata: nil,
-        naver_pay: nil,
         pay_by_bank: nil,
-        payto: nil,
         us_bank_account: nil
       ); end
     end
@@ -1843,16 +1739,16 @@ module Stripe
       sig { returns(String) }
       attr_accessor :customer
       # Specifies which fields in the response should be expanded.
-      sig { returns(T::Array[String]) }
+      sig { returns(T.nilable(T::Array[String])) }
       attr_accessor :expand
-      sig { params(customer: String, expand: T::Array[String]).void }
+      sig { params(customer: String, expand: T.nilable(T::Array[String])).void }
       def initialize(customer: nil, expand: nil); end
     end
     class DetachParams < Stripe::RequestParams
       # Specifies which fields in the response should be expanded.
-      sig { returns(T::Array[String]) }
+      sig { returns(T.nilable(T::Array[String])) }
       attr_accessor :expand
-      sig { params(expand: T::Array[String]).void }
+      sig { params(expand: T.nilable(T::Array[String])).void }
       def initialize(expand: nil); end
     end
     # Attaches a PaymentMethod object to a Customer.