stripe 13.6.0.pre.beta.1 → 14.0.0

data/lib/stripe/resources/radar/early_fraud_warning.rb

@@ -66,15 +66,6 @@ module Stripe
           @starting_after = starting_after
         end
       end
-
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
       # An EFW is actionable if it has not received a dispute and has not been fully refunded. You may wish to proactively refund a charge that receives an EFW, in order to avoid receiving a dispute later.
       attr_reader :actionable
       # ID of the charge this early fraud warning is for, optionally expanded.

data/lib/stripe/resources/radar/value_list.rb

@@ -20,15 +20,6 @@ module Stripe
       class DeleteParams < Stripe::RequestParams
       end
 
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
-
       class UpdateParams < Stripe::RequestParams
         # The name of the value list for use in rules.
         attr_accessor :alias

data/lib/stripe/resources/radar/value_list_item.rb

@@ -19,15 +19,6 @@ module Stripe
       class DeleteParams < Stripe::RequestParams
       end
 
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
-
       class ListParams < Stripe::RequestParams
         class Created < Stripe::RequestParams
           # Minimum value to filter by (exclusive)

data/lib/stripe/resources/refund.rb

@@ -73,13 +73,6 @@ module Stripe
       class Giropay < Stripe::StripeObject; end
       class Grabpay < Stripe::StripeObject; end
 
-      class IdBankTransfer < Stripe::StripeObject
-        # The reference assigned to the refund.
-        attr_reader :reference
-        # Status of the reference on the refund. This can be `pending`, `available` or `unavailable`.
-        attr_reader :reference_status
-      end
-
       class JpBankTransfer < Stripe::StripeObject
         # The reference assigned to the refund.
         attr_reader :reference
@@ -103,6 +96,8 @@ module Stripe
         attr_reader :reference_status
       end
 
+      class NzBankTransfer < Stripe::StripeObject; end
+
       class P24 < Stripe::StripeObject
         # The reference assigned to the refund.
         attr_reader :reference
@@ -173,8 +168,6 @@ module Stripe
       attr_reader :giropay
       # Attribute for field grabpay
       attr_reader :grabpay
-      # Attribute for field id_bank_transfer
-      attr_reader :id_bank_transfer
       # Attribute for field jp_bank_transfer
       attr_reader :jp_bank_transfer
       # Attribute for field klarna
@@ -183,6 +176,8 @@ module Stripe
       attr_reader :multibanco
       # Attribute for field mx_bank_transfer
       attr_reader :mx_bank_transfer
+      # Attribute for field nz_bank_transfer
+      attr_reader :nz_bank_transfer
       # Attribute for field p24
       attr_reader :p24
       # Attribute for field paynow
@@ -228,6 +223,13 @@ module Stripe
       attr_reader :type
     end
 
+    class PresentmentDetails < Stripe::StripeObject
+      # Amount intended to be collected by this payment, denominated in presentment_currency.
+      attr_reader :presentment_amount
+      # Currency presented to the customer during payment.
+      attr_reader :presentment_currency
+    end
+
     class ListParams < Stripe::RequestParams
       class Created < Stripe::RequestParams
         # Minimum value to filter by (exclusive)
@@ -335,15 +337,6 @@ module Stripe
       end
     end
 
-    class RetrieveParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
-      end
-    end
-
     class UpdateParams < Stripe::RequestParams
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
@@ -403,6 +396,8 @@ module Stripe
     attr_reader :object
     # ID of the PaymentIntent that's refunded.
     attr_reader :payment_intent
+    # Attribute for field presentment_details
+    attr_reader :presentment_details
     # Reason for the refund, which is either user-provided (`duplicate`, `fraudulent`, or `requested_by_customer`) or generated by Stripe internally (`expired_uncaptured_charge`).
     attr_reader :reason
     # This is the transaction number that appears on email receipts sent for this refund.

data/lib/stripe/resources/reporting/report_run.rb

@@ -135,15 +135,6 @@ module Stripe
           @report_type = report_type
         end
       end
-
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       attr_reader :created
       # If something should go wrong during the run, a message about the failure (populated when

data/lib/stripe/resources/reporting/report_type.rb

@@ -27,15 +27,6 @@ module Stripe
           @expand = expand
         end
       end
-
-      class RetrieveParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-
-        def initialize(expand: nil)
-          @expand = expand
-        end
-      end
       # Most recent time for which this Report Type is available. Measured in seconds since the Unix epoch.
       attr_reader :data_available_end
       # Earliest time for which this Report Type is available. Measured in seconds since the Unix epoch.

data/lib/stripe/resources/review.rb

@@ -76,15 +76,6 @@ module Stripe
       end
     end
 
-    class RetrieveParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
-      end
-    end
-
     class ApproveParams < Stripe::RequestParams
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
@@ -97,7 +88,7 @@ module Stripe
     attr_reader :billing_zip
     # The charge associated with this review.
     attr_reader :charge
-    # The reason the review was closed, or null if it has not yet been closed. One of `approved`, `refunded`, `refunded_as_fraud`, `disputed`, or `redacted`.
+    # The reason the review was closed, or null if it has not yet been closed. One of `approved`, `refunded`, `refunded_as_fraud`, `disputed`, `redacted`, or `canceled`.
     attr_reader :closed_reason
     # Time at which the object was created. Measured in seconds since the Unix epoch.
     attr_reader :created
@@ -117,7 +108,7 @@ module Stripe
     attr_reader :opened_reason
     # The PaymentIntent ID associated with this review, if one exists.
     attr_reader :payment_intent
-    # The reason the review is currently open or closed. One of `rule`, `manual`, `approved`, `refunded`, `refunded_as_fraud`, `disputed`, or `redacted`.
+    # The reason the review is currently open or closed. One of `rule`, `manual`, `approved`, `refunded`, `refunded_as_fraud`, `disputed`, `redacted`, or `canceled`.
     attr_reader :reason
     # Information related to the browsing session of the user who initiated the payment.
     attr_reader :session

data/lib/stripe/resources/setup_attempt.rb

@@ -129,17 +129,6 @@ module Stripe
 
       class Cashapp < Stripe::StripeObject; end
 
-      class IdBankTransfer < Stripe::StripeObject
-        # Bank where the account is located.
-        attr_reader :bank
-        # Local bank code of the bank.
-        attr_reader :bank_code
-        # Name of the bank associated with the bank account.
-        attr_reader :bank_name
-        # Merchant name and billing details name, for the customer to check for the correct merchant when performing the bank transfer.
-        attr_reader :display_name
-      end
-
       class Ideal < Stripe::StripeObject
         # The customer's bank. Can be one of `abn_amro`, `asn_bank`, `bunq`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`.
         attr_reader :bank
@@ -160,8 +149,14 @@ module Stripe
       class Klarna < Stripe::StripeObject; end
       class KrCard < Stripe::StripeObject; end
       class Link < Stripe::StripeObject; end
+
+      class NaverPay < Stripe::StripeObject
+        # Uniquely identifies this particular Naver Pay account. You can use this attribute to check whether two Naver Pay accounts are the same.
+        attr_reader :buyer_id
+      end
+
+      class NzBankAccount < Stripe::StripeObject; end
       class Paypal < Stripe::StripeObject; end
-      class Payto < Stripe::StripeObject; end
       class RevolutPay < Stripe::StripeObject; end
       class SepaDebit < Stripe::StripeObject; end
 
@@ -205,8 +200,6 @@ module Stripe
       attr_reader :card_present
       # Attribute for field cashapp
       attr_reader :cashapp
-      # Attribute for field id_bank_transfer
-      attr_reader :id_bank_transfer
       # Attribute for field ideal
       attr_reader :ideal
       # Attribute for field kakao_pay
@@ -217,10 +210,12 @@ module Stripe
       attr_reader :kr_card
       # Attribute for field link
       attr_reader :link
+      # Attribute for field naver_pay
+      attr_reader :naver_pay
+      # Attribute for field nz_bank_account
+      attr_reader :nz_bank_account
       # Attribute for field paypal
       attr_reader :paypal
-      # Attribute for field payto
-      attr_reader :payto
       # Attribute for field revolut_pay
       attr_reader :revolut_pay
       # Attribute for field sepa_debit