spade 0.0.1 → 0.0.2

data/sproutcore/frameworks/foundation/mixins/editable.js

@@ -1,158 +0,0 @@
-// ==========================================================================
-// Project:   SproutCore - JavaScript Application Framework
-// Copyright: ©2006-2011 Strobe Inc. and contributors.
-//            Portions ©2008-2010 Apple Inc. All rights reserved.
-// License:   Licensed under MIT license (see license.js)
-// ==========================================================================
-
-/**
-  @namespace
-
-  The Editable mixin is a standard protocol used to activate keyboard editing 
-  on views that are editable such as text fields, label views and item views.
-  
-  You should apply this mixin, or implement the methods, if you are
-  designing an item view for a collection and you want to automatically
-  trigger editing.
-  
-  h2. Using Editable Views
-  
-  To use a view that includes the Editable mixin, you simply call three
-  methods on the view:
-  
-  - To begin editing, call beginEditing().  This will make the view first responder and allow the user to make changes to it.  If the view cannot begin editing for some reason, it will return NO.
-  
-  - If you want to cancel editing, you should try calling discardEditing().  This will cause the editor to discard its changed value and resign first responder.  Some editors do not support cancelling editing and will return NO.  If this is the case, you may optionally try calling commitEditing() instead to force the view to resign first responder, even though this will commit the changes.
-  
-  - If you want to end editing, while saving any changes that were made, try calling commitEditing().  This will cause the editor to validate and apply its changed value and resign first responder.  If the editor cannot validate its contents for some reason, it will return NO.  In this case you may optionally try calling discardEditing() instead to force the view to resign first responder, even though this will discard the changes.
-  
-  
-  h2. Implementing an Editable View
-  
-  To implement a new view that is editable, you should implement the three
-  methods defined below: beginEditing(), discardEditing(), and
-  commitEditing().  If you already allow editing when your view becomes first
-  responder and commit your changes when the view loses first responder status
-  then you can simply apply this mixin and not override any methods.
-  
-  
-  @since SproutCore 1.0
-  
-*/
-SC.Editable = {
-  editorDelegate: null,
-
-  /**
-    Indicates whether a view is editable or not.  You can optionally 
-    implement the methods in this mixin to disallow editing is isEditable is
-    NO.
-    
-    @property {Boolean}
-  */
-  isEditable: NO,
-  
-  /**
-    Indicates whether editing is currently in progress.  The methods you
-    implement should generally up this property as appropriate when you 
-    begin and end editing.
-    
-    @property {Boolean}
-  */
-  isEditing: NO,
-  
-  /**
-    Begins editing on the view.
-    
-    This method is called by other views when they want you to begin editing.
-    You should write this method to become first responder, perform any 
-    additional setup needed to begin editing and then return YES.
-    
-    If for some reason you do not want to allow editing right now, you can
-    also return NO.  If your view is already editing, then you should not
-    restart editing again but just return YES.
-
-    The default implementation checks to see if editing is allowed, then
-    becomes first responder and updates the isEditing property if appropriate.
-    Generally you will want to replace this method with your own 
-    implementation and not call the default.
-    
-    @returns {Boolean} YES if editing began or is in progress, NO otherwise
-  */
-  beginEditing: function() {
-    if (!this.get('isEditable')) return NO ;
-    if (this.get('isEditing')) return YES ;
-    
-    // begin editing
-    this.beginPropertyChanges();
-    this.set('isEditing', YES) ;
-    this.becomeFirstResponder() ;
-    this.endPropertyChanges();
-    
-    return YES ;
-  },
-  
-  /**
-    Ends editing on the view, discarding any changes that were made to the
-    view value in the meantime.
-    
-    This method is called by other views when they want to cancel editing
-    that began earlier.  When this method is called you should resign first
-    responder, restore the original value of the view and return YES.
-    
-    If your view cannot revert back to its original state before editing began
-    then you can implement this method to simply return NO.  A properly
-    implemented client may try to call commitEditing() instead to force your
-    view to end editing anyway.
-    
-    If this method is called on a view that is not currently editing, you
-    should always just return YES.
-    
-    The default implementation does not support discarding changes and always
-    returns NO.
-    
-    @returns {Boolean} YES if changes were discarded and editing ended.
-  */
-  discardEditing: function() {
-    // if we are not editing, return YES, otherwise NO.
-    
-    return !this.get('isEditing') ;
-  },
-  
-  /**
-    Ends editing on the view, committing any changes that were made to the 
-    view value in the meantime.
-    
-    This method is called by other views when they want to end editing, 
-    saving any changes that were made to the view in the meantime.  When this
-    method is called you should resign first responder, save the latest
-    value of the view and return YES.
-    
-    If your view cannot save the current state of the view for some reason 
-    (for example if validation fails), then you should return NO.  Properly
-    implemented clients may then try to call discardEditing() to force your
-    view to resign first responder anyway.
-    
-    Some views apply changes to their value immediately during an edit instead
-    of waiting for the view to end editing.  If this is the case, you should
-    still implement commitEditing but you simply may not save any value 
-    changes.
-  
-    If this method is called on a view that is not currently editing, you
-    should always just reutrn YES.
-    
-    The default implementation sets isEditing to NO, resigns first responder
-    and returns YES.
-    
-    @returns {Boolean} YES if changes were discarded and editing ended.
-  */
-  commitEditing: function() {
-    if (!this.get('isEditing')) return YES;
-    this.set('isEditing', NO) ;
-    this.resignFirstResponder() ;
-    
-    this.invokeDelegateMethod(this.get('editorDelegate'), 'inlineEditorShouldCommitEditing', this, this.get('value'));
-    
-    return YES ;
-  }
-
-} ;

data/sproutcore/frameworks/foundation/mixins/flowed_layout.js

@@ -1,628 +0,0 @@
-// ==========================================================================
-// Project:   SproutCore - JavaScript Application Framework
-// Copyright: ©2006-2011 Strobe Inc. and contributors.
-//            Portions ©2008-2009 Apple Inc. All rights reserved.
-// License:   Licensed under MIT license (see license.js)
-// ==========================================================================
-
-SC.ALIGN_JUSTIFY = "justify";
-/**
-  @namespace 
-
-  Normal SproutCore views are absolutely positioned--parent views have relatively
-  little input on where their child views are placed.
-  
-  This mixin makes a view layout its child views itself, flowing left-to-right
-  or up-to-down, and, optionally, wrapping.
-  
-  Child views with useAbsoluteLayout===YES will be ignored in the layout process.
-  This mixin detects when child views have changed their size, and will adjust accordingly.
-  It also observes child views' isVisible and calculatedWidth/Height properties, and, as a
-  flowedlayout-specific extension, isHidden.
-  
-  These properties are observed through `#js:observeChildLayout` and `#js:unobserveChildLayout`;
-  you can override the method to add your own properties. To customize isVisible behavior,
-  you will also want to override shouldIncludeChildInFlow.
-  
-  This relies on the children's frames or, if specified, calculatedWidth and calculatedHeight
-  properties.
-  
-  This view mixes very well with animation. Further, it is able to automatically mix
-  in to child views it manages, created or not yet created, allowing you to specify
-  settings such as animation once only, and have everything "just work".
-  
-  Like normal views, you simply specify child views--everything will "just work."
-  
-  @since SproutCore 1.0
-*/
-SC.FlowedLayout = {
-  /**
-    The direction of flow.
-  */
-  layoutDirection: SC.LAYOUT_HORIZONTAL,
-
-  /**
-    Whether the view should automatically resize (to allow scrolling, for instance)
-  */
-  autoResize: YES,
-  
-  shouldResizeWidth: YES,
-  
-  shouldResizeHeight: YES,
-  
-  /**
-    The alignment of items within rows or columns.
-  */
-  align: SC.ALIGN_LEFT,
-  
-  /**
-    If YES, flowing child views are allowed to wrap to new rows or columns.
-  */
-  canWrap: YES,
-  
-  /**
-    A set of spacings (left, top, right, bottom) for subviews. Defaults to 0s all around.
-    This is the amount of space that will be before, after, above, and below the view. These
-    spacings do not collapse into each other.
-    
-    You can also set flowSpacing on any child view, or implement flowSpacingForView.
-  */
-  defaultFlowSpacing: { left: 0, bottom: 0, top: 0, right: 0 },
-  
-  /**
-    @property {Hash}
-    
-    Padding around the edges of this flow layout view. This is useful for
-    situations where you don't control the layout of the FlowedLayout view;
-    for instance, when the view is the contentView for a SC.ScrollView.
-  */
-  flowPadding: { left: 0, bottom: 0, right: 0, top: 0 },
-
-  /**
-    @private
-    
-    If the flowPadding somehow misses a property (one of the sides),
-    we need to make sure a default value of 0 is still there.
-   */
-  _scfl_validFlowPadding: function() {
-    var padding = this.get('flowPadding') || {}, ret = {};
-    ret.left = padding.left || 0;
-    ret.top = padding.top || 0;
-    ret.bottom = padding.bottom || 0;
-    ret.right = padding.right || 0;
-    return ret;
-  }.property('flowPadding').cacheable(),
-  
-  concatenatedProperties: ["childMixins"],
-  
-  initMixin: function() {
-    this.invokeOnce("_scfl_tile");
-  },
-  
-  /**
-    Detects when the child views change.
-  */
-  _scfl_childViewsDidChange: function(c) {
-    this.invokeOnce("_scfl_tile");
-  }.observes("childViews"),
-  
-  _scfl_layoutPropertyDidChange: function(){
-    this.invokeOnce("_scfl_tile");
-  },
-  
-  /**
-    Overriden to only update if it is a view we do not manage, or the width or height has changed
-    since our last record of it.
-  */
-  layoutDidChangeFor: function(c) {
-    // if we have not flowed yet, ignore as well
-    if (!this._scfl_itemLayouts) return sc_super();
-    
-    // now, check if anything has changed
-    var l = this._scfl_itemLayouts[SC.guidFor(c)], cl = c.get('layout'), f = c.get('frame');
-    if (!l) return sc_super();
-    
-    var same = YES;
-    
-    // in short, if anything interfered with the layout, we need to
-    // do something about it.
-    if (l.left && l.left !== cl.left) same = NO;
-    else if (l.top && l.top !== cl.top) same = NO;
-    else if (!c.get('fillWidth') && l.width && l.width !== cl.width) same = NO;
-    else if (!l.width && !c.get('fillWidth') && f.width !== c._scfl_lastFrame.width) same = NO;
-    else if (!c.get('fillHeight') && l.height && l.height !== cl.height) same = NO;
-    else if (!l.height && !c.get('fillHeight') && f.height !== c._scfl_lastFrame.height) same = NO;
-    
-    if (same) {
-      return sc_super();
-    }
-    
-    // nothing has changed. This is where we do something
-    this.invokeOnce("_scfl_tile");
-    sc_super();
-  },
-  
-  /**
-    Sets up layout observers on child view. We observe three things:
-    - isVisible
-    - calculatedWidth
-    - calculatedHeight
-    
-    Actual layout changes are detected through layoutDidChangeFor.
-  */
-  observeChildLayout: function(c) {
-    if (c._scfl_isBeingObserved) return;
-    c._scfl_isBeingObserved = YES;
-    c.addObserver('isVisible', this, '_scfl_layoutPropertyDidChange');
-    c.addObserver('useAbsoluteLayout', this, '_scfl_layoutPropertyDidChange');
-    c.addObserver('calculatedWidth', this, '_scfl_layoutPropertyDidChange');
-    c.addObserver('calculatedHeight', this, '_scfl_layoutPropertyDidChange');
-    c.addObserver('startsNewRow', this, '_scfl_layoutPropertyDidChange');
-  },
-  
-  /**
-    Removes observers on child view.
-  */
-  unobserveChildLayout: function(c) {
-    c._scfl_isBeingObserved = NO;
-    c.removeObserver('isVisible', this, '_scfl_layoutPropertyDidChange');
-    c.removeObserver('useAbsoluteLayout', this, '_scfl_layoutPropertyDidChange');
-    c.removeObserver('calculatedWidth', this, '_scfl_layoutPropertyDidChange');
-    c.removeObserver('calculatedHeight', this, '_scfl_layoutPropertyDidChange');
-    c.removeObserver('startsNewRow', this, '_scfl_layoutPropertyDidChange');
-  },
-  
-  /**
-    Determines whether the specified child view should be included in the flow layout.
-    By default, if it has isVisible: NO or useAbsoluteLayout: YES, it will not be included.
-  */
-  shouldIncludeChildInFlow: function(c) {
-    return c.get('isVisible') && !c.get('useAbsoluteLayout');
-  },
-  
-  /**
-    Returns the flow spacings for a given view. By default, returns the view's flowSpacing,
-    and if they don't exist, the defaultFlowSpacing for this view.
-  */
-  flowSpacingForView: function(idx, view) {
-    var spacing = view.get("flowSpacing");
-    if (SC.none(spacing)) spacing = this.get("defaultFlowSpacing");
-    
-    if (SC.typeOf(spacing) === SC.T_NUMBER) {
-      spacing = { left: spacing, right: spacing, bottom: spacing, top: spacing };
-    } else {
-      spacing['left'] = spacing['left'] || 0;
-      spacing['right'] = spacing['right'] || 0;
-      spacing['top'] = spacing['top'] || 0;
-      spacing['bottom'] = spacing['bottom'] || 0;
-    }
-    
-    return spacing;
-  },
-  
-  /**
-    Returns the flow size for a given view. The default version checks the view's
-    calculatedWidth/Height, then its frame.
-    
-    For spacers, this returns an empty size.
-    
-    This should return a structure like: { width: whatever, height: whatever }
-  */
-  flowSizeForView: function(idx, view) {
-    var cw = view.get('calculatedWidth'), ch = view.get('calculatedHeight');
-    
-    var calc = {}, f = view.get('frame');
-    view._scfl_lastFrame = f;
-    
-    // if there is a calculated width, use that. NOTE: if calculatedWidth === 0,
-    // it is invalid. This is the practice in other views.
-    if (cw) {
-      calc.width = cw;
-    } else {
-      // if the width is not calculated, we can't just use the frame because
-      // we may have altered the frame. _scfl_cachedFlowSize is valid, however,
-      // if the frame width is equal to _scfl_cachedCalculatedFlowSize.width, as 
-      // that means the width has not been recomputed.
-      //
-      // Keep in mind that if we are the ones who recomputed it, we can use our
-      // original value. If it was recomputed by the view itself, then its value
-      // should be ok and unmanipulated by us, in theory.
-      if (view._scfl_cachedCalculatedFlowSize && view._scfl_cachedCalculatedFlowSize.width == f.width) {
-        calc.width = view._scfl_cachedFlowSize.width;
-      } else {
-        calc.width = f.width;
-      }
-    }
-    
-    // same for calculated height
-    if (ch) {
-      calc.height = ch;
-    } else {
-      if (view._scfl_cachedCalculatedFlowSize && view._scfl_cachedCalculatedFlowSize.height == f.height) {
-        calc.height = view._scfl_cachedFlowSize.height;
-      } else {
-        calc.height = f.height;
-      }
-    }
-    
-    // if it is a spacer, we must set the dimension that it
-    // expands in to 0.
-    if (view.get('isSpacer')) {
-      if (this.get('layoutDirection') === SC.LAYOUT_HORIZONTAL) calc.width = 0;
-      else calc.height = 0;
-    }
-    
-    // if it has a fillWidth/Height, clear it for later
-    if (
-      this.get('layoutDirection') === SC.LAYOUT_HORIZONTAL && view.get('fillHeight')
-    ) {
-      calc.height = 0;
-    } else if (
-      this.get('layoutDirection') === SC.LAYOUT_VERTICAL && view.get('fillWidth')
-    ) {
-      calc.width = 0;
-    }
-    
-    // return
-    return calc;
-  },
-  
-  /**
-    Takes a row and positions everything within the row, calling updateLayout.
-    It should return the row height.
-  */
-  flowRow: function(row, rowOffset, rowSize, availableRowLength, padding, primary, secondary, align) {
-    
-    // we deal with values already offset for padding
-    // therefore, we must adjust availableRowLength
-    if (primary === 'left') availableRowLength -= padding['left'] + padding['right'];
-    else availableRowLength -= padding['top'] + padding['bottom'];
-    
-    // if it is justified, we'll add spacing between ALL views.
-    var item, len = row.length, idx, layout, rowLength = 0, totalSpaceUnits = 0, spacePerUnit = 0;
-    
-    // first, determine the width of all items, and find out how many virtual spacers there are
-    // this width includes spacing
-    for (idx = 0; idx < len; idx++) {
-      item = row[idx];
-      if (item.get("isSpacer")) totalSpaceUnits += item.get("spaceUnits") || 1;
-      else rowLength += item._scfl_cachedSpacedSize[primary === "left" ? "width" : "height"];
-    }
-    
-    // add space units for justification
-    // when justifying, we give one space unit between each item
-    if (len > 1 && align === SC.ALIGN_JUSTIFY) {
-      totalSpaceUnits += len - 1;
-    }
-    
-    // calculate space per unit if needed
-    if (totalSpaceUnits > 0) {
-      spacePerUnit = (availableRowLength - rowLength) / totalSpaceUnits;
-      rowLength = availableRowLength;
-    }
-    
-    // prepare.
-    // we will setup x, y
-    // we _may_ set up width and/or height, if the view is a spacer or has
-    // fillHeight/fillWidth.
-    var x = padding['left'], y = padding['top'], width, height, itemSize = 0;
-    
-    if (primary === 'left') y = rowOffset;
-    else x = rowOffset;
-    
-    // handle align
-    if (align === SC.ALIGN_RIGHT || align === SC.ALIGN_BOTTOM) {
-      if (primary === 'left') x = (availableRowLength - rowLength - padding.right);
-      else y = (availableRowLength - rowLength - padding.bottom);
-    } else if (align === SC.ALIGN_CENTER || align === SC.ALIGN_MIDDLE) {
-      if (primary === 'left') x = (availableRowLength - padding.top - padding.bottom) / 2 - rowLength / 2;
-      else y = (availableRowLength - padding.top - padding.bottom) / 2 - rowLength / 2;
-    }
-    
-    // position
-    for (idx = 0; idx < len; idx++) {
-      item = row[idx];
-      
-      width = undefined; height = undefined;
-      
-      // sometimes a view wants to fill the row; that is, if we flow horizontally,
-      // be the full height, and vertically, fill the width. This only applies if
-      // we are not wrapping...
-      //
-      // Since we still position with spacing, we have to set the width to the total row
-      // size minus the spacing. The spaced size holds only the spacing because the
-      // flow size method returns 0.
-      if (item.get("fillHeight") && primary === "left") {
-        height = rowSize - item._scfl_cachedSpacedSize.height;
-      }
-      if (item.get("fillWidth") && primary === "top") {
-        width = rowSize - item._scfl_cachedSpacedSize.width;
-      }
-      
-      // update offset
-      if (item.get('isSpacer')) {
-        // the cached size is the minimum size for the spacer
-        itemSize = item._scfl_cachedSpacedSize[primary === 'left' ? 'width' : 'height'];
-        
-        // get the spacer size
-        itemSize = Math.max(itemSize, spacePerUnit * (item.get('spaceUnits') || 1));
-        
-        // and finally, set back the cached flow size value--
-        // not including spacing (this is the view size for rendering)
-        // spacers include 
-        if (primary === "left") {
-          width = itemSize;
-        } else {
-          height = itemSize;
-        }
-      } else {
-        if (primary === "left") {
-          itemSize = item._scfl_cachedSpacedSize.width;
-        } else {
-          itemSize = item._scfl_cachedSpacedSize.height;
-        }
-      }
-      
-      this.flowPositionView(idx, item, x, y, width, height);
-      
-      if (primary === 'left') x += itemSize;
-      else y += itemSize;
-      
-      // update justification
-      if (align === SC.ALIGN_JUSTIFY) {
-        if (primary === 'left') x += spacePerUnit;
-        else y += spacePerUnit;
-      }
-    }
-    
-    if (primary === 'left') return x;
-    return y;
-  },
-  
-  flowPositionView: function(idx, item, x, y, width, height) {
-    var last = this._scfl_itemLayouts[SC.guidFor(item)],
-        spacing = item._scfl_cachedSpacing;
-    var l = {
-      left: x + spacing.left,
-      top: y + spacing.top
-    };
-    
-    if (width !== undefined) l.width = width;
-    if (height !== undefined) l.height = height;
-
-    // we must set this first, or it will think it has to update layout again, and again, and again
-    // and we get a crash.
-    this._scfl_itemLayouts[SC.guidFor(item)] = l;
-
-    // Also, never set if the same. We only want to compare layout properties, though
-    if (last && 
-      last.left == l.left && last.top == l.top && 
-      last.width == l.width && l.width !== undefined && 
-      last.height == l.height && l.height !== undefined
-    ) {
-      return;
-    }
-    
-    item.adjust(l);
-  },
-  
-  // hacky, but only way to allow us to use calculatedWidth/Height and avoid clobbering
-  // our own layout (interfering with our tiling) while still allowing scrolling.
-  renderMixin: function(context) {
-    context.css('minWidth', this.get('calculatedWidth'));
-    context.css('minHeight', this.get('calculatedHeight'));
-  },
-  
-  clippingFrame: function() {
-    var ret = sc_super(),
-    cw = this.get('calculatedWidth'), ch = this.get('calculatedHeight');
-    
-    if(cw) ret.width = cw;
-    if(ch) ret.height = ch;
-    
-    return ret;
-  }.property('calculatedWidth', 'calculatedHeight'),
-  
-  _scfl_calculatedSizeDidChange: function() {
-    var elem = this.$(),
-    cw = this.get('calculatedWidth'), ch = this.get('calculatedHeight');
-    
-    if(cw) elem.css('minWidth', this.get('calculatedWidth'));
-    if(ch) elem.css('minHeight', this.get('calculatedHeight'));
-  }.observes('calculatedWidth', 'calculatedHeight'),
-  
-  _scfl_tile: function() {
-    if (!this._scfl_itemLayouts) this._scfl_itemLayouts = {};
-    
-    var isObserving = this._scfl_isObserving || SC.CoreSet.create(),
-        nowObserving = SC.CoreSet.create();
-    
-    var children = this.get('childViews'), child, idx, len = children.length,
-        rows = [], row = [],
-        startRowSize = 0, rowSize = 0, 
-        startsNewRow, newRowPending = NO,
-        rowOffset = 0, itemOffset = 0, 
-        width = this.get('frame').width,
-        height = this.get('frame').height,
-        canWrap = this.get('canWrap'),
-        layoutDirection = this.get('layoutDirection'),
-        padding = this.get('_scfl_validFlowPadding'),
-        childSize, childSpacing, childSpacedSize, align = this.get('align'),
-        longestRow = 0;
-    
-    
-    var primary, primary_os, primary_d, secondary, secondary_os, secondary_d, flowLimit, availableRowLength;
-    if (layoutDirection === SC.LAYOUT_HORIZONTAL) {
-      availableRowLength = width;
-      flowLimit = width - padding["right"];
-      
-      primary = "left"; secondary = "top";
-      primary_os = "right"; secondary_os = "bottom";
-      primary_d = "width"; secondary_d = "height";
-    } else {
-      availableRowLength = height;
-      flowLimit = height - padding["bottom"];
-      
-      primary = "top"; secondary = "left";
-      primary_os = "bottom"; secondary_os = "right";
-      primary_d = "height"; secondary_d = "width";
-    }
-    
-    rowOffset = padding[secondary];
-    itemOffset = padding[primary];
-    /*
-    // if we cannot wrap, the row size is our frame (minus padding)
-    if (!canWrap) {
-      if (layoutDirection === SC.LAYOUT_HORIZONTAL) {
-        rowSize = startRowSize = height - padding.top - padding.bottom;
-      } else {
-        rowSize = startRowSize = width - padding.right - padding.left;
-      }
-    }
-      */  
-    // now, loop through all child views and group them into rows.
-    // note that we are NOT positioning.
-    // when we are done with a row, we call flowRow to finish it.
-    for (idx = 0; idx < len; idx++) {
-      // get a child.
-      child = children[idx];
-      
-      // update observing lists
-      isObserving.remove(SC.guidFor(child));
-      nowObserving.add(child);
-      
-      // we need to check if it manually starts a new row, because if it does this is remembered even if the child isn't visible
-      startsNewRow = child.get('startsNewRow');
-      
-      // skip positioning of items with isVisible === NO or isHidden === YES
-      if (!this.shouldIncludeChildInFlow(child)) {
-        // if the hidden view started a new row, remember it for later
-        newRowPending = startsNewRow || newRowPending;
-        continue;
-      }
-      
-      // get spacing, size, and cache
-      childSize = this.flowSizeForView(idx, child);
-            
-      childSpacing = this.flowSpacingForView(idx, child);
-      childSpacedSize = {
-        width: childSize.width + childSpacing.left + childSpacing.right,
-        height: childSize.height + childSpacing.top + childSpacing.bottom
-      };
-      
-      // flowRow will use this; it's purely here for performance
-      child._scfl_cachedFlowSize = childSize;
-      child._scfl_cachedSpacedSize = childSpacedSize;
-      child._scfl_cachedSpacing = childSpacing;
-      
-      // determine if the item can fit in the row including the collapsed right margin+padding or if it explicitly starts a new row
-      if (startsNewRow || newRowPending || (canWrap && row.length > 0 && itemOffset + childSize[primary_d] >= flowLimit)) {
-        // regardless of why we just created a new row, so the flag needs to be reset
-        newRowPending = NO;
-        
-        // first, flow this row
-        this.flowRow(row, rowOffset, rowSize, availableRowLength, padding, primary, secondary, align);
-
-        // We need another row.
-        row = [];
-        rows.push(row);
-        rowOffset += rowSize;
-        rowSize = startRowSize;
-        itemOffset = padding[primary];
-      
-      }
-
-      // add too row and update row size+item offset
-      row.push(child);
-      rowSize = Math.max(childSpacedSize[secondary_d], rowSize);
-      itemOffset += childSpacedSize[primary_d];
-      longestRow = Math.max(longestRow, itemOffset);
-    }
-    
-    
-    // flow last row
-    itemOffset = this.flowRow(row, rowOffset, rowSize, availableRowLength, padding, primary, secondary, align);
-    longestRow = Math.max(longestRow, itemOffset);
-
-    
-    // update calculated width/height
-    this._scfl_lastFrameSize = this.get('frame');
-    
-    // size is now calculated the same whether canWrap is on or not
-    if (this.get('autoResize')) {
-      if(longestRow) {
-        if (layoutDirection === SC.LAYOUT_HORIZONTAL) {
-          if(this.get('shouldResizeWidth')) this.set('calculatedWidth', longestRow + padding[primary_os]);
-        } else {
-          if(this.get('shouldResizeHeight')) this.set('calculatedHeight', longestRow + padding[primary_os]);
-        }
-      }
-      
-      if(rowOffset + rowSize) {
-        if (layoutDirection === SC.LAYOUT_HORIZONTAL) {
-          if(this.get('shouldResizeHeight')) this.set('calculatedHeight', rowOffset + rowSize + padding[secondary_os]);
-        } else {
-          if(this.get('shouldResizeWidth')) this.set('calculatedWidth', rowOffset + rowSize + padding[secondary_os]);
-        }
-      }
-    }
-    
-    
-    // cleanup on aisle 7
-    len = isObserving.length;
-    for (idx = 0; idx < len; idx++) {
-      this.unobserveChildLayout(isObserving[idx]);
-    }
-
-    len = nowObserving.length;
-    for (idx = 0; idx < len; idx++) {
-      this.observeChildLayout(nowObserving[idx]);
-    }
-    
-    this._scfl_isObserving = nowObserving;
-  },
-  
-  _scfl_frameDidChange: function() {
-    var frame = this.get("frame"), lf = this._scfl_lastFrameSize;
-    this._scfl_lastFrameSize = frame;
-
-    if (lf && lf.width == frame.width && lf.height == frame.height) return;
-    
-    this.invokeOnce("_scfl_tile");
-  }.observes("frame"),
-  
-  destroyMixin: function() {
-    var isObserving = this._scfl_isObserving;
-    if (!isObserving) return;
-    
-    var len = isObserving.length, idx;
-    for (idx = 0; idx < len; idx++) {
-      this.unobserveChildLayout(isObserving[idx]);
-    }
-  },
-  
-  /*
-    Reorders childViews so that the passed views are at the beginning in the order they are passed. Needed because childViews are layed out in the order they appear in childViews.
-  */
-  reorder: function(views) {
-    if(!SC.typeOf(views) === SC.T_ARRAY) views = arguments;
-    
-    var i = views.length, childViews = this.childViews, view;
-    
-    // childViews.[] should be observed
-    this.beginPropertyChanges();
-    
-    while(i-- > 0) {
-      view = views[i];
-      
-      childViews.removeObject(view);
-      childViews.unshiftObject(view);
-    }
-    
-    this.endPropertyChanges();
-    
-    this._scfl_childViewsDidChange();
-    
-    return this;
-  }
-};