sketchup-api-stubs 0.7.8 → 0.7.9

data/lib/sketchup-api-stubs/stubs/Sketchup/ArcCurve.rb

@@ -1,209 +1,209 @@
-# Copyright:: Copyright 2022 Trimble Inc.
-# License:: The MIT License (MIT)
-
-# An ArcCurve is a Curve that makes up part of a circle. This is the
-# underlying class for circles as well.
-#
-# You can think of ArcCurves as entities that were created with SketchUp's
-# Arc or Circle drawing tools and Curves as entities that were created with
-# the Freehand drawing tool.
-#
-# However, keep in mind that all Curves in SketchUp are really edges with
-# some extra data attached to them. When you use the API to draw a Curve or
-# ArcCurve, you are really drawing edges.
-#
-# ArcCurve is a subclass of Curve, so all of the methods that are available
-# to Curves are also available to ArcCurves.
-#
-# @example
-#   # Draw a circle on the ground plane around the origin.
-#   center_point = Geom::Point3d.new(0,0,0)
-#   normal_vector = Geom::Vector3d.new(0,0,1)
-#   radius = 10
-#
-#   entities = Sketchup.active_model.entities
-#   edgearray = entities.add_circle center_point, normal_vector, radius
-#   first_edge = edgearray[0]
-#   arccurve = first_edge.curve
-#
-# @version SketchUp 6.0
-class Sketchup::ArcCurve < Sketchup::Curve
-
-  # Instance Methods
-
-  # The center method is used to retrieve the Point3d that is at the center of
-  # the circular arc.
-  #
-  # @example
-  #   centerpoint = Geom::Point3d.new
-  #   # Create a circle perpendicular to the normal or Z axis
-  #   vector = Geom::Vector3d.new 0,0,1
-  #   vector2 = vector.normalize!
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_circle centerpoint, vector2, 10
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   point = arccurve.center
-  #
-  # @return point - a Point3d at the center of the arc if
-  #   successful
-  #
-  # @version SketchUp 6.0
-  def center
-  end
-
-  # The {#end_angle} method is used to retrieve the angle of the end of the arc
-  # measured from the X axis in radians.
-  #
-  # @example
-  #   # Create a 1/2 circle, normal to the Z axis
-  #   start_a = 0.0
-  #   end_a = 180.degrees
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edges = entities.add_arc(ORIGIN, X_AXIS, Z_AXIS, 5, start_a, end_a)
-  #   arc_curve = edges.first.curve
-  #   end_angle = arc_curve.end_angle
-  #
-  # @note A bug in SketchUp 2017 and older will report the end-angle for some
-  #   circles as more than 360 degrees. In such case, subtract +2 * PI+ from
-  #   the end angle value.
-  #
-  # @return [Float]
-  #
-  # @version SketchUp 6.0
-  def end_angle
-  end
-
-  # The normal method retrieves a Vector3d that is perpendicular to the plane of
-  # the arc.
-  #
-  # @example
-  #   centerpoint = Geom::Point3d.new
-  #   # Create a circle perpendicular to the normal or Z axis
-  #   vector = Geom::Vector3d.new 0,0,1
-  #   vector2 = vector.normalize!
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_circle centerpoint, vector2, 10
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   v = arccurve.normal
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def normal
-  end
-
-  # The plane method is used to retrieve the plane of the arc.
-  #
-  # Refer to the Geom module for instructions to create a plane.
-  #
-  # @example
-  #   centerpoint = Geom::Point3d.new
-  #   # Create a circle perpendicular to the normal or Z axis
-  #   vector = Geom::Vector3d.new 0,0,1
-  #   vector2 = vector.normalize!
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_circle centerpoint, vector2, 10
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   plane = arccurve.plane
-  #
-  # @return plane - the plane of the arc if successful
-  #
-  # @version SketchUp 6.0
-  def plane
-  end
-
-  # The radius method is used to retrieve the radius of the arc.
-  #
-  # @example
-  #   centerpoint = Geom::Point3d.new
-  #   # Create a circle perpendicular to the normal or Z axis
-  #   vector = Geom::Vector3d.new 0,0,1
-  #   vector2 = vector.normalize!
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_circle centerpoint, vector2, 10
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   radius = arccurve.radius
-  #
-  # @return radius - the radius of the arc if successful
-  #
-  # @version SketchUp 6.0
-  def radius
-  end
-
-  # The start_angle method is used to retrieve the angle of the start of the
-  # arc, measured from the X axis in radians.
-  #
-  # @example
-  #   # Create a 1/4 circle, radius of 5, normal to the Z axis
-  #   center = Geom::Point3d.new 0, 0, -1
-  #   normal = Geom::Vector3d.new 0,0,1
-  #   xaxis = Geom::Vector3d.new 1,0,0
-  #   start_a = Math::PI/2
-  #   end_a = Math::PI
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_arc center, xaxis, normal, 5, start_a, end_a
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   start_angle = arccurve.start_angle
-  #
-  # @return angle - the angle of the start of the arc if successful
-  #
-  # @version SketchUp 6.0
-  def start_angle
-  end
-
-  # The xaxis method is used to retrieve the X axis of the coordinate system for
-  # the curve. Note that the length of the returned vector is equal to the radius
-  # of the underlying curve.
-  #
-  # @example
-  #   centerpoint = Geom::Point3d.new
-  #   # Create a circle perpendicular to the normal or Z axis
-  #   vector = Geom::Vector3d.new 0,0,1
-  #   vector2 = vector.normalize!
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_circle centerpoint, vector2, 10
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   v = arccurve.xaxis
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def xaxis
-  end
-
-  # The yaxis method is used to retrieve the Y axis of the coordinate system for
-  # the curve. Note that the length of the returned vector is equal to the radius
-  # of the underlying curve.
-  #
-  # @example
-  #   centerpoint = Geom::Point3d.new
-  #   # Create a circle perpendicular to the normal or Z axis
-  #   vector = Geom::Vector3d.new 0,0,1
-  #   vector2 = vector.normalize!
-  #   model = Sketchup.active_model
-  #   entities = model.entities
-  #   edgearray = entities.add_circle centerpoint, vector2, 10
-  #   edge = edgearray[0]
-  #   arccurve = edge.curve
-  #   v = arccurve.yaxis
-  #
-  # @return vector - a Vector3d object if successful
-  #
-  # @version SketchUp 6.0
-  def yaxis
-  end
-
-end
+# Copyright:: Copyright 2023 Trimble Inc.
+# License:: The MIT License (MIT)
+
+# An ArcCurve is a Curve that makes up part of a circle. This is the
+# underlying class for circles as well.
+#
+# You can think of ArcCurves as entities that were created with SketchUp's
+# Arc or Circle drawing tools and Curves as entities that were created with
+# the Freehand drawing tool.
+#
+# However, keep in mind that all Curves in SketchUp are really edges with
+# some extra data attached to them. When you use the API to draw a Curve or
+# ArcCurve, you are really drawing edges.
+#
+# ArcCurve is a subclass of Curve, so all of the methods that are available
+# to Curves are also available to ArcCurves.
+#
+# @example
+#   # Draw a circle on the ground plane around the origin.
+#   center_point = Geom::Point3d.new(0,0,0)
+#   normal_vector = Geom::Vector3d.new(0,0,1)
+#   radius = 10
+#
+#   entities = Sketchup.active_model.entities
+#   edgearray = entities.add_circle center_point, normal_vector, radius
+#   first_edge = edgearray[0]
+#   arccurve = first_edge.curve
+#
+# @version SketchUp 6.0
+class Sketchup::ArcCurve < Sketchup::Curve
+
+  # Instance Methods
+
+  # The center method is used to retrieve the Point3d that is at the center of
+  # the circular arc.
+  #
+  # @example
+  #   centerpoint = Geom::Point3d.new
+  #   # Create a circle perpendicular to the normal or Z axis
+  #   vector = Geom::Vector3d.new 0,0,1
+  #   vector2 = vector.normalize!
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_circle centerpoint, vector2, 10
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   point = arccurve.center
+  #
+  # @return point - a Point3d at the center of the arc if
+  #   successful
+  #
+  # @version SketchUp 6.0
+  def center
+  end
+
+  # The {#end_angle} method is used to retrieve the angle of the end of the arc
+  # measured from the X axis in radians.
+  #
+  # @example
+  #   # Create a 1/2 circle, normal to the Z axis
+  #   start_a = 0.0
+  #   end_a = 180.degrees
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edges = entities.add_arc(ORIGIN, X_AXIS, Z_AXIS, 5, start_a, end_a)
+  #   arc_curve = edges.first.curve
+  #   end_angle = arc_curve.end_angle
+  #
+  # @note A bug in SketchUp 2017 and older will report the end-angle for some
+  #   circles as more than 360 degrees. In such case, subtract +2 * PI+ from
+  #   the end angle value.
+  #
+  # @return [Float]
+  #
+  # @version SketchUp 6.0
+  def end_angle
+  end
+
+  # The normal method retrieves a Vector3d that is perpendicular to the plane of
+  # the arc.
+  #
+  # @example
+  #   centerpoint = Geom::Point3d.new
+  #   # Create a circle perpendicular to the normal or Z axis
+  #   vector = Geom::Vector3d.new 0,0,1
+  #   vector2 = vector.normalize!
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_circle centerpoint, vector2, 10
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   v = arccurve.normal
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def normal
+  end
+
+  # The plane method is used to retrieve the plane of the arc.
+  #
+  # Refer to the Geom module for instructions to create a plane.
+  #
+  # @example
+  #   centerpoint = Geom::Point3d.new
+  #   # Create a circle perpendicular to the normal or Z axis
+  #   vector = Geom::Vector3d.new 0,0,1
+  #   vector2 = vector.normalize!
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_circle centerpoint, vector2, 10
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   plane = arccurve.plane
+  #
+  # @return plane - the plane of the arc if successful
+  #
+  # @version SketchUp 6.0
+  def plane
+  end
+
+  # The radius method is used to retrieve the radius of the arc.
+  #
+  # @example
+  #   centerpoint = Geom::Point3d.new
+  #   # Create a circle perpendicular to the normal or Z axis
+  #   vector = Geom::Vector3d.new 0,0,1
+  #   vector2 = vector.normalize!
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_circle centerpoint, vector2, 10
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   radius = arccurve.radius
+  #
+  # @return radius - the radius of the arc if successful
+  #
+  # @version SketchUp 6.0
+  def radius
+  end
+
+  # The start_angle method is used to retrieve the angle of the start of the
+  # arc, measured from the X axis in radians.
+  #
+  # @example
+  #   # Create a 1/4 circle, radius of 5, normal to the Z axis
+  #   center = Geom::Point3d.new 0, 0, -1
+  #   normal = Geom::Vector3d.new 0,0,1
+  #   xaxis = Geom::Vector3d.new 1,0,0
+  #   start_a = Math::PI/2
+  #   end_a = Math::PI
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_arc center, xaxis, normal, 5, start_a, end_a
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   start_angle = arccurve.start_angle
+  #
+  # @return angle - the angle of the start of the arc if successful
+  #
+  # @version SketchUp 6.0
+  def start_angle
+  end
+
+  # The xaxis method is used to retrieve the X axis of the coordinate system for
+  # the curve. Note that the length of the returned vector is equal to the radius
+  # of the underlying curve.
+  #
+  # @example
+  #   centerpoint = Geom::Point3d.new
+  #   # Create a circle perpendicular to the normal or Z axis
+  #   vector = Geom::Vector3d.new 0,0,1
+  #   vector2 = vector.normalize!
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_circle centerpoint, vector2, 10
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   v = arccurve.xaxis
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def xaxis
+  end
+
+  # The yaxis method is used to retrieve the Y axis of the coordinate system for
+  # the curve. Note that the length of the returned vector is equal to the radius
+  # of the underlying curve.
+  #
+  # @example
+  #   centerpoint = Geom::Point3d.new
+  #   # Create a circle perpendicular to the normal or Z axis
+  #   vector = Geom::Vector3d.new 0,0,1
+  #   vector2 = vector.normalize!
+  #   model = Sketchup.active_model
+  #   entities = model.entities
+  #   edgearray = entities.add_circle centerpoint, vector2, 10
+  #   edge = edgearray[0]
+  #   arccurve = edge.curve
+  #   v = arccurve.yaxis
+  #
+  # @return vector - a Vector3d object if successful
+  #
+  # @version SketchUp 6.0
+  def yaxis
+  end
+
+end