second_step 0.1.2 → 0.1.3

data/secondstep-notify-1.0.0-osx/lib/ruby/lib/ruby/gems/2.2.0/gems/second_step-0.1.1/secondstep-notify-1.0.0-osx/lib/ruby/lib/ruby/2.2.0/net/protocol.rb

@@ -1,420 +0,0 @@
-#
-# = net/protocol.rb
-#
-#--
-# Copyright (c) 1999-2004 Yukihiro Matsumoto
-# Copyright (c) 1999-2004 Minero Aoki
-#
-# written and maintained by Minero Aoki <aamine@loveruby.net>
-#
-# This program is free software. You can re-distribute and/or
-# modify this program under the same terms as Ruby itself,
-# Ruby Distribute License or GNU General Public License.
-#
-# $Id: protocol.rb 46060 2014-05-23 12:36:30Z nobu $
-#++
-#
-# WARNING: This file is going to remove.
-# Do not rely on the implementation written in this file.
-#
-
-require 'socket'
-require 'timeout'
-
-module Net # :nodoc:
-
-  class Protocol   #:nodoc: internal use only
-    private
-    def Protocol.protocol_param(name, val)
-      module_eval(<<-End, __FILE__, __LINE__ + 1)
-        def #{name}
-          #{val}
-        end
-      End
-    end
-  end
-
-
-  class ProtocolError          < StandardError; end
-  class ProtoSyntaxError       < ProtocolError; end
-  class ProtoFatalError        < ProtocolError; end
-  class ProtoUnknownError      < ProtocolError; end
-  class ProtoServerError       < ProtocolError; end
-  class ProtoAuthError         < ProtocolError; end
-  class ProtoCommandError      < ProtocolError; end
-  class ProtoRetriableError    < ProtocolError; end
-  ProtocRetryError = ProtoRetriableError
-
-  ##
-  # OpenTimeout, a subclass of Timeout::Error, is raised if a connection cannot
-  # be created within the open_timeout.
-
-  class OpenTimeout            < Timeout::Error; end
-
-  ##
-  # ReadTimeout, a subclass of Timeout::Error, is raised if a chunk of the
-  # response cannot be read within the read_timeout.
-
-  class ReadTimeout            < Timeout::Error; end
-
-
-  class BufferedIO   #:nodoc: internal use only
-    def initialize(io)
-      @io = io
-      @read_timeout = 60
-      @continue_timeout = nil
-      @debug_output = nil
-      @rbuf = ''
-    end
-
-    attr_reader :io
-    attr_accessor :read_timeout
-    attr_accessor :continue_timeout
-    attr_accessor :debug_output
-
-    def inspect
-      "#<#{self.class} io=#{@io}>"
-    end
-
-    def eof?
-      @io.eof?
-    end
-
-    def closed?
-      @io.closed?
-    end
-
-    def close
-      @io.close
-    end
-
-    #
-    # Read
-    #
-
-    public
-
-    def read(len, dest = '', ignore_eof = false)
-      LOG "reading #{len} bytes..."
-      read_bytes = 0
-      begin
-        while read_bytes + @rbuf.size < len
-          dest << (s = rbuf_consume(@rbuf.size))
-          read_bytes += s.size
-          rbuf_fill
-        end
-        dest << (s = rbuf_consume(len - read_bytes))
-        read_bytes += s.size
-      rescue EOFError
-        raise unless ignore_eof
-      end
-      LOG "read #{read_bytes} bytes"
-      dest
-    end
-
-    def read_all(dest = '')
-      LOG 'reading all...'
-      read_bytes = 0
-      begin
-        while true
-          dest << (s = rbuf_consume(@rbuf.size))
-          read_bytes += s.size
-          rbuf_fill
-        end
-      rescue EOFError
-        ;
-      end
-      LOG "read #{read_bytes} bytes"
-      dest
-    end
-
-    def readuntil(terminator, ignore_eof = false)
-      begin
-        until idx = @rbuf.index(terminator)
-          rbuf_fill
-        end
-        return rbuf_consume(idx + terminator.size)
-      rescue EOFError
-        raise unless ignore_eof
-        return rbuf_consume(@rbuf.size)
-      end
-    end
-
-    def readline
-      readuntil("\n").chop
-    end
-
-    private
-
-    BUFSIZE = 1024 * 16
-
-    def rbuf_fill
-      begin
-        @rbuf << @io.read_nonblock(BUFSIZE)
-      rescue IO::WaitReadable
-        if IO.select([@io], nil, nil, @read_timeout)
-          retry
-        else
-          raise Net::ReadTimeout
-        end
-      rescue IO::WaitWritable
-        # OpenSSL::Buffering#read_nonblock may fail with IO::WaitWritable.
-        # http://www.openssl.org/support/faq.html#PROG10
-        if IO.select(nil, [@io], nil, @read_timeout)
-          retry
-        else
-          raise Net::ReadTimeout
-        end
-      end
-    end
-
-    def rbuf_consume(len)
-      s = @rbuf.slice!(0, len)
-      @debug_output << %Q[-> #{s.dump}\n] if @debug_output
-      s
-    end
-
-    #
-    # Write
-    #
-
-    public
-
-    def write(str)
-      writing {
-        write0 str
-      }
-    end
-
-    alias << write
-
-    def writeline(str)
-      writing {
-        write0 str + "\r\n"
-      }
-    end
-
-    private
-
-    def writing
-      @written_bytes = 0
-      @debug_output << '<- ' if @debug_output
-      yield
-      @debug_output << "\n" if @debug_output
-      bytes = @written_bytes
-      @written_bytes = nil
-      bytes
-    end
-
-    def write0(str)
-      @debug_output << str.dump if @debug_output
-      len = @io.write(str)
-      @written_bytes += len
-      len
-    end
-
-    #
-    # Logging
-    #
-
-    private
-
-    def LOG_off
-      @save_debug_out = @debug_output
-      @debug_output = nil
-    end
-
-    def LOG_on
-      @debug_output = @save_debug_out
-    end
-
-    def LOG(msg)
-      return unless @debug_output
-      @debug_output << msg + "\n"
-    end
-  end
-
-
-  class InternetMessageIO < BufferedIO   #:nodoc: internal use only
-    def initialize(io)
-      super
-      @wbuf = nil
-    end
-
-    #
-    # Read
-    #
-
-    def each_message_chunk
-      LOG 'reading message...'
-      LOG_off()
-      read_bytes = 0
-      while (line = readuntil("\r\n")) != ".\r\n"
-        read_bytes += line.size
-        yield line.sub(/\A\./, '')
-      end
-      LOG_on()
-      LOG "read message (#{read_bytes} bytes)"
-    end
-
-    # *library private* (cannot handle 'break')
-    def each_list_item
-      while (str = readuntil("\r\n")) != ".\r\n"
-        yield str.chop
-      end
-    end
-
-    def write_message_0(src)
-      prev = @written_bytes
-      each_crlf_line(src) do |line|
-        write0 dot_stuff(line)
-      end
-      @written_bytes - prev
-    end
-
-    #
-    # Write
-    #
-
-    def write_message(src)
-      LOG "writing message from #{src.class}"
-      LOG_off()
-      len = writing {
-        using_each_crlf_line {
-          write_message_0 src
-        }
-      }
-      LOG_on()
-      LOG "wrote #{len} bytes"
-      len
-    end
-
-    def write_message_by_block(&block)
-      LOG 'writing message from block'
-      LOG_off()
-      len = writing {
-        using_each_crlf_line {
-          begin
-            block.call(WriteAdapter.new(self, :write_message_0))
-          rescue LocalJumpError
-            # allow `break' from writer block
-          end
-        }
-      }
-      LOG_on()
-      LOG "wrote #{len} bytes"
-      len
-    end
-
-    private
-
-    def dot_stuff(s)
-      s.sub(/\A\./, '..')
-    end
-
-    def using_each_crlf_line
-      @wbuf = ''
-      yield
-      if not @wbuf.empty?   # unterminated last line
-        write0 dot_stuff(@wbuf.chomp) + "\r\n"
-      elsif @written_bytes == 0   # empty src
-        write0 "\r\n"
-      end
-      write0 ".\r\n"
-      @wbuf = nil
-    end
-
-    def each_crlf_line(src)
-      buffer_filling(@wbuf, src) do
-        while line = @wbuf.slice!(/\A[^\r\n]*(?:\n|\r(?:\n|(?!\z)))/)
-          yield line.chomp("\n") + "\r\n"
-        end
-      end
-    end
-
-    def buffer_filling(buf, src)
-      case src
-      when String    # for speeding up.
-        0.step(src.size - 1, 1024) do |i|
-          buf << src[i, 1024]
-          yield
-        end
-      when File    # for speeding up.
-        while s = src.read(1024)
-          buf << s
-          yield
-        end
-      else    # generic reader
-        src.each do |str|
-          buf << str
-          yield if buf.size > 1024
-        end
-        yield unless buf.empty?
-      end
-    end
-  end
-
-
-  #
-  # The writer adapter class
-  #
-  class WriteAdapter
-    def initialize(socket, method)
-      @socket = socket
-      @method_id = method
-    end
-
-    def inspect
-      "#<#{self.class} socket=#{@socket.inspect}>"
-    end
-
-    def write(str)
-      @socket.__send__(@method_id, str)
-    end
-
-    alias print write
-
-    def <<(str)
-      write str
-      self
-    end
-
-    def puts(str = '')
-      write str.chomp("\n") + "\n"
-    end
-
-    def printf(*args)
-      write sprintf(*args)
-    end
-  end
-
-
-  class ReadAdapter   #:nodoc: internal use only
-    def initialize(block)
-      @block = block
-    end
-
-    def inspect
-      "#<#{self.class}>"
-    end
-
-    def <<(str)
-      call_block(str, &@block) if @block
-    end
-
-    private
-
-    # This method is needed because @block must be called by yield,
-    # not Proc#call.  You can see difference when using `break' in
-    # the block.
-    def call_block(str)
-      yield str
-    end
-  end
-
-
-  module NetPrivate   #:nodoc: obsolete
-    Socket = ::Net::InternetMessageIO
-  end
-
-end   # module Net

data/secondstep-notify-1.0.0-osx/lib/ruby/lib/ruby/gems/2.2.0/gems/second_step-0.1.1/secondstep-notify-1.0.0-osx/lib/ruby/lib/ruby/2.2.0/net/smtp.rb

@@ -1,1073 +0,0 @@
-# = net/smtp.rb
-#
-# Copyright (c) 1999-2007 Yukihiro Matsumoto.
-#
-# Copyright (c) 1999-2007 Minero Aoki.
-#
-# Written & maintained by Minero Aoki <aamine@loveruby.net>.
-#
-# Documented by William Webber and Minero Aoki.
-#
-# This program is free software. You can re-distribute and/or
-# modify this program under the same terms as Ruby itself.
-#
-# NOTE: You can find Japanese version of this document at:
-# http://www.ruby-lang.org/ja/man/html/net_smtp.html
-#
-# $Id: smtp.rb 46793 2014-07-11 19:22:19Z kosaki $
-#
-# See Net::SMTP for documentation.
-#
-
-require 'net/protocol'
-require 'digest/md5'
-require 'timeout'
-begin
-  require 'openssl'
-rescue LoadError
-end
-
-module Net
-
-  # Module mixed in to all SMTP error classes
-  module SMTPError
-    # This *class* is a module for backward compatibility.
-    # In later release, this module becomes a class.
-  end
-
-  # Represents an SMTP authentication error.
-  class SMTPAuthenticationError < ProtoAuthError
-    include SMTPError
-  end
-
-  # Represents SMTP error code 420 or 450, a temporary error.
-  class SMTPServerBusy < ProtoServerError
-    include SMTPError
-  end
-
-  # Represents an SMTP command syntax error (error code 500)
-  class SMTPSyntaxError < ProtoSyntaxError
-    include SMTPError
-  end
-
-  # Represents a fatal SMTP error (error code 5xx, except for 500)
-  class SMTPFatalError < ProtoFatalError
-    include SMTPError
-  end
-
-  # Unexpected reply code returned from server.
-  class SMTPUnknownError < ProtoUnknownError
-    include SMTPError
-  end
-
-  # Command is not supported on server.
-  class SMTPUnsupportedCommand < ProtocolError
-    include SMTPError
-  end
-
-  #
-  # == What is This Library?
-  #
-  # This library provides functionality to send internet
-  # mail via SMTP, the Simple Mail Transfer Protocol. For details of
-  # SMTP itself, see [RFC2821] (http://www.ietf.org/rfc/rfc2821.txt).
-  #
-  # == What is This Library NOT?
-  #
-  # This library does NOT provide functions to compose internet mails.
-  # You must create them by yourself. If you want better mail support,
-  # try RubyMail or TMail or search for alternatives in
-  # {RubyGems.org}[https://rubygems.org/] or {The Ruby
-  # Toolbox}[https://www.ruby-toolbox.com/].
-  #
-  # FYI: the official documentation on internet mail is: [RFC2822] (http://www.ietf.org/rfc/rfc2822.txt).
-  #
-  # == Examples
-  #
-  # === Sending Messages
-  #
-  # You must open a connection to an SMTP server before sending messages.
-  # The first argument is the address of your SMTP server, and the second
-  # argument is the port number. Using SMTP.start with a block is the simplest
-  # way to do this. This way, the SMTP connection is closed automatically
-  # after the block is executed.
-  #
-  #     require 'net/smtp'
-  #     Net::SMTP.start('your.smtp.server', 25) do |smtp|
-  #       # Use the SMTP object smtp only in this block.
-  #     end
-  #
-  # Replace 'your.smtp.server' with your SMTP server. Normally
-  # your system manager or internet provider supplies a server
-  # for you.
-  #
-  # Then you can send messages.
-  #
-  #     msgstr = <<END_OF_MESSAGE
-  #     From: Your Name <your@mail.address>
-  #     To: Destination Address <someone@example.com>
-  #     Subject: test message
-  #     Date: Sat, 23 Jun 2001 16:26:43 +0900
-  #     Message-Id: <unique.message.id.string@example.com>
-  #
-  #     This is a test message.
-  #     END_OF_MESSAGE
-  #
-  #     require 'net/smtp'
-  #     Net::SMTP.start('your.smtp.server', 25) do |smtp|
-  #       smtp.send_message msgstr,
-  #                         'your@mail.address',
-  #                         'his_address@example.com'
-  #     end
-  #
-  # === Closing the Session
-  #
-  # You MUST close the SMTP session after sending messages, by calling
-  # the #finish method:
-  #
-  #     # using SMTP#finish
-  #     smtp = Net::SMTP.start('your.smtp.server', 25)
-  #     smtp.send_message msgstr, 'from@address', 'to@address'
-  #     smtp.finish
-  #
-  # You can also use the block form of SMTP.start/SMTP#start.  This closes
-  # the SMTP session automatically:
-  #
-  #     # using block form of SMTP.start
-  #     Net::SMTP.start('your.smtp.server', 25) do |smtp|
-  #       smtp.send_message msgstr, 'from@address', 'to@address'
-  #     end
-  #
-  # I strongly recommend this scheme.  This form is simpler and more robust.
-  #
-  # === HELO domain
-  #
-  # In almost all situations, you must provide a third argument
-  # to SMTP.start/SMTP#start. This is the domain name which you are on
-  # (the host to send mail from). It is called the "HELO domain".
-  # The SMTP server will judge whether it should send or reject
-  # the SMTP session by inspecting the HELO domain.
-  #
-  #     Net::SMTP.start('your.smtp.server', 25,
-  #                     'mail.from.domain') { |smtp| ... }
-  #
-  # === SMTP Authentication
-  #
-  # The Net::SMTP class supports three authentication schemes;
-  # PLAIN, LOGIN and CRAM MD5.  (SMTP Authentication: [RFC2554])
-  # To use SMTP authentication, pass extra arguments to
-  # SMTP.start/SMTP#start.
-  #
-  #     # PLAIN
-  #     Net::SMTP.start('your.smtp.server', 25, 'mail.from.domain',
-  #                     'Your Account', 'Your Password', :plain)
-  #     # LOGIN
-  #     Net::SMTP.start('your.smtp.server', 25, 'mail.from.domain',
-  #                     'Your Account', 'Your Password', :login)
-  #
-  #     # CRAM MD5
-  #     Net::SMTP.start('your.smtp.server', 25, 'mail.from.domain',
-  #                     'Your Account', 'Your Password', :cram_md5)
-  #
-  class SMTP
-
-    Revision = %q$Revision: 46793 $.split[1]
-
-    # The default SMTP port number, 25.
-    def SMTP.default_port
-      25
-    end
-
-    # The default mail submission port number, 587.
-    def SMTP.default_submission_port
-      587
-    end
-
-    # The default SMTPS port number, 465.
-    def SMTP.default_tls_port
-      465
-    end
-
-    class << self
-      alias default_ssl_port default_tls_port
-    end
-
-    def SMTP.default_ssl_context
-      OpenSSL::SSL::SSLContext.new
-    end
-
-    #
-    # Creates a new Net::SMTP object.
-    #
-    # +address+ is the hostname or ip address of your SMTP
-    # server.  +port+ is the port to connect to; it defaults to
-    # port 25.
-    #
-    # This method does not open the TCP connection.  You can use
-    # SMTP.start instead of SMTP.new if you want to do everything
-    # at once.  Otherwise, follow SMTP.new with SMTP#start.
-    #
-    def initialize(address, port = nil)
-      @address = address
-      @port = (port || SMTP.default_port)
-      @esmtp = true
-      @capabilities = nil
-      @socket = nil
-      @started = false
-      @open_timeout = 30
-      @read_timeout = 60
-      @error_occurred = false
-      @debug_output = nil
-      @tls = false
-      @starttls = false
-      @ssl_context = nil
-    end
-
-    # Provide human-readable stringification of class state.
-    def inspect
-      "#<#{self.class} #{@address}:#{@port} started=#{@started}>"
-    end
-
-    #
-    # Set whether to use ESMTP or not.  This should be done before
-    # calling #start.  Note that if #start is called in ESMTP mode,
-    # and the connection fails due to a ProtocolError, the SMTP
-    # object will automatically switch to plain SMTP mode and
-    # retry (but not vice versa).
-    #
-    attr_accessor :esmtp
-
-    # +true+ if the SMTP object uses ESMTP (which it does by default).
-    alias :esmtp? :esmtp
-
-    # true if server advertises STARTTLS.
-    # You cannot get valid value before opening SMTP session.
-    def capable_starttls?
-      capable?('STARTTLS')
-    end
-
-    def capable?(key)
-      return nil unless @capabilities
-      @capabilities[key] ? true : false
-    end
-    private :capable?
-
-    # true if server advertises AUTH PLAIN.
-    # You cannot get valid value before opening SMTP session.
-    def capable_plain_auth?
-      auth_capable?('PLAIN')
-    end
-
-    # true if server advertises AUTH LOGIN.
-    # You cannot get valid value before opening SMTP session.
-    def capable_login_auth?
-      auth_capable?('LOGIN')
-    end
-
-    # true if server advertises AUTH CRAM-MD5.
-    # You cannot get valid value before opening SMTP session.
-    def capable_cram_md5_auth?
-      auth_capable?('CRAM-MD5')
-    end
-
-    def auth_capable?(type)
-      return nil unless @capabilities
-      return false unless @capabilities['AUTH']
-      @capabilities['AUTH'].include?(type)
-    end
-    private :auth_capable?
-
-    # Returns supported authentication methods on this server.
-    # You cannot get valid value before opening SMTP session.
-    def capable_auth_types
-      return [] unless @capabilities
-      return [] unless @capabilities['AUTH']
-      @capabilities['AUTH']
-    end
-
-    # true if this object uses SMTP/TLS (SMTPS).
-    def tls?
-      @tls
-    end
-
-    alias ssl? tls?
-
-    # Enables SMTP/TLS (SMTPS: SMTP over direct TLS connection) for
-    # this object.  Must be called before the connection is established
-    # to have any effect.  +context+ is a OpenSSL::SSL::SSLContext object.
-    def enable_tls(context = SMTP.default_ssl_context)
-      raise 'openssl library not installed' unless defined?(OpenSSL)
-      raise ArgumentError, "SMTPS and STARTTLS is exclusive" if @starttls
-      @tls = true
-      @ssl_context = context
-    end
-
-    alias enable_ssl enable_tls
-
-    # Disables SMTP/TLS for this object.  Must be called before the
-    # connection is established to have any effect.
-    def disable_tls
-      @tls = false
-      @ssl_context = nil
-    end
-
-    alias disable_ssl disable_tls
-
-    # Returns truth value if this object uses STARTTLS.
-    # If this object always uses STARTTLS, returns :always.
-    # If this object uses STARTTLS when the server support TLS, returns :auto.
-    def starttls?
-      @starttls
-    end
-
-    # true if this object uses STARTTLS.
-    def starttls_always?
-      @starttls == :always
-    end
-
-    # true if this object uses STARTTLS when server advertises STARTTLS.
-    def starttls_auto?
-      @starttls == :auto
-    end
-
-    # Enables SMTP/TLS (STARTTLS) for this object.
-    # +context+ is a OpenSSL::SSL::SSLContext object.
-    def enable_starttls(context = SMTP.default_ssl_context)
-      raise 'openssl library not installed' unless defined?(OpenSSL)
-      raise ArgumentError, "SMTPS and STARTTLS is exclusive" if @tls
-      @starttls = :always
-      @ssl_context = context
-    end
-
-    # Enables SMTP/TLS (STARTTLS) for this object if server accepts.
-    # +context+ is a OpenSSL::SSL::SSLContext object.
-    def enable_starttls_auto(context = SMTP.default_ssl_context)
-      raise 'openssl library not installed' unless defined?(OpenSSL)
-      raise ArgumentError, "SMTPS and STARTTLS is exclusive" if @tls
-      @starttls = :auto
-      @ssl_context = context
-    end
-
-    # Disables SMTP/TLS (STARTTLS) for this object.  Must be called
-    # before the connection is established to have any effect.
-    def disable_starttls
-      @starttls = false
-      @ssl_context = nil
-    end
-
-    # The address of the SMTP server to connect to.
-    attr_reader :address
-
-    # The port number of the SMTP server to connect to.
-    attr_reader :port
-
-    # Seconds to wait while attempting to open a connection.
-    # If the connection cannot be opened within this time, a
-    # Net::OpenTimeout is raised. The default value is 30 seconds.
-    attr_accessor :open_timeout
-
-    # Seconds to wait while reading one block (by one read(2) call).
-    # If the read(2) call does not complete within this time, a
-    # Net::ReadTimeout is raised. The default value is 60 seconds.
-    attr_reader :read_timeout
-
-    # Set the number of seconds to wait until timing-out a read(2)
-    # call.
-    def read_timeout=(sec)
-      @socket.read_timeout = sec if @socket
-      @read_timeout = sec
-    end
-
-    #
-    # WARNING: This method causes serious security holes.
-    # Use this method for only debugging.
-    #
-    # Set an output stream for debug logging.
-    # You must call this before #start.
-    #
-    #   # example
-    #   smtp = Net::SMTP.new(addr, port)
-    #   smtp.set_debug_output $stderr
-    #   smtp.start do |smtp|
-    #     ....
-    #   end
-    #
-    def debug_output=(arg)
-      @debug_output = arg
-    end
-
-    alias set_debug_output debug_output=
-
-    #
-    # SMTP session control
-    #
-
-    #
-    # Creates a new Net::SMTP object and connects to the server.
-    #
-    # This method is equivalent to:
-    #
-    #   Net::SMTP.new(address, port).start(helo_domain, account, password, authtype)
-    #
-    # === Example
-    #
-    #     Net::SMTP.start('your.smtp.server') do |smtp|
-    #       smtp.send_message msgstr, 'from@example.com', ['dest@example.com']
-    #     end
-    #
-    # === Block Usage
-    #
-    # If called with a block, the newly-opened Net::SMTP object is yielded
-    # to the block, and automatically closed when the block finishes.  If called
-    # without a block, the newly-opened Net::SMTP object is returned to
-    # the caller, and it is the caller's responsibility to close it when
-    # finished.
-    #
-    # === Parameters
-    #
-    # +address+ is the hostname or ip address of your smtp server.
-    #
-    # +port+ is the port to connect to; it defaults to port 25.
-    #
-    # +helo+ is the _HELO_ _domain_ provided by the client to the
-    # server (see overview comments); it defaults to 'localhost'.
-    #
-    # The remaining arguments are used for SMTP authentication, if required
-    # or desired.  +user+ is the account name; +secret+ is your password
-    # or other authentication token; and +authtype+ is the authentication
-    # type, one of :plain, :login, or :cram_md5.  See the discussion of
-    # SMTP Authentication in the overview notes.
-    #
-    # === Errors
-    #
-    # This method may raise:
-    #
-    # * Net::SMTPAuthenticationError
-    # * Net::SMTPServerBusy
-    # * Net::SMTPSyntaxError
-    # * Net::SMTPFatalError
-    # * Net::SMTPUnknownError
-    # * Net::OpenTimeout
-    # * Net::ReadTimeout
-    # * IOError
-    #
-    def SMTP.start(address, port = nil, helo = 'localhost',
-                   user = nil, secret = nil, authtype = nil,
-                   &block)   # :yield: smtp
-      new(address, port).start(helo, user, secret, authtype, &block)
-    end
-
-    # +true+ if the SMTP session has been started.
-    def started?
-      @started
-    end
-
-    #
-    # Opens a TCP connection and starts the SMTP session.
-    #
-    # === Parameters
-    #
-    # +helo+ is the _HELO_ _domain_ that you'll dispatch mails from; see
-    # the discussion in the overview notes.
-    #
-    # If both of +user+ and +secret+ are given, SMTP authentication
-    # will be attempted using the AUTH command.  +authtype+ specifies
-    # the type of authentication to attempt; it must be one of
-    # :login, :plain, and :cram_md5.  See the notes on SMTP Authentication
-    # in the overview.
-    #
-    # === Block Usage
-    #
-    # When this methods is called with a block, the newly-started SMTP
-    # object is yielded to the block, and automatically closed after
-    # the block call finishes.  Otherwise, it is the caller's
-    # responsibility to close the session when finished.
-    #
-    # === Example
-    #
-    # This is very similar to the class method SMTP.start.
-    #
-    #     require 'net/smtp'
-    #     smtp = Net::SMTP.new('smtp.mail.server', 25)
-    #     smtp.start(helo_domain, account, password, authtype) do |smtp|
-    #       smtp.send_message msgstr, 'from@example.com', ['dest@example.com']
-    #     end
-    #
-    # The primary use of this method (as opposed to SMTP.start)
-    # is probably to set debugging (#set_debug_output) or ESMTP
-    # (#esmtp=), which must be done before the session is
-    # started.
-    #
-    # === Errors
-    #
-    # If session has already been started, an IOError will be raised.
-    #
-    # This method may raise:
-    #
-    # * Net::SMTPAuthenticationError
-    # * Net::SMTPServerBusy
-    # * Net::SMTPSyntaxError
-    # * Net::SMTPFatalError
-    # * Net::SMTPUnknownError
-    # * Net::OpenTimeout
-    # * Net::ReadTimeout
-    # * IOError
-    #
-    def start(helo = 'localhost',
-              user = nil, secret = nil, authtype = nil)   # :yield: smtp
-      if block_given?
-        begin
-          do_start helo, user, secret, authtype
-          return yield(self)
-        ensure
-          do_finish
-        end
-      else
-        do_start helo, user, secret, authtype
-        return self
-      end
-    end
-
-    # Finishes the SMTP session and closes TCP connection.
-    # Raises IOError if not started.
-    def finish
-      raise IOError, 'not yet started' unless started?
-      do_finish
-    end
-
-    private
-
-    def tcp_socket(address, port)
-      TCPSocket.open address, port
-    end
-
-    def do_start(helo_domain, user, secret, authtype)
-      raise IOError, 'SMTP session already started' if @started
-      if user or secret
-        check_auth_method(authtype || DEFAULT_AUTH_TYPE)
-        check_auth_args user, secret
-      end
-      s = Timeout.timeout(@open_timeout, Net::OpenTimeout) do
-        tcp_socket(@address, @port)
-      end
-      logging "Connection opened: #{@address}:#{@port}"
-      @socket = new_internet_message_io(tls? ? tlsconnect(s) : s)
-      check_response critical { recv_response() }
-      do_helo helo_domain
-      if starttls_always? or (capable_starttls? and starttls_auto?)
-        unless capable_starttls?
-          raise SMTPUnsupportedCommand,
-              "STARTTLS is not supported on this server"
-        end
-        starttls
-        @socket = new_internet_message_io(tlsconnect(s))
-        # helo response may be different after STARTTLS
-        do_helo helo_domain
-      end
-      authenticate user, secret, (authtype || DEFAULT_AUTH_TYPE) if user
-      @started = true
-    ensure
-      unless @started
-        # authentication failed, cancel connection.
-        s.close if s and not s.closed?
-        @socket = nil
-      end
-    end
-
-    def ssl_socket(socket, context)
-      OpenSSL::SSL::SSLSocket.new socket, context
-    end
-
-    def tlsconnect(s)
-      verified = false
-      s = ssl_socket(s, @ssl_context)
-      logging "TLS connection started"
-      s.sync_close = true
-      s.connect
-      if @ssl_context.verify_mode != OpenSSL::SSL::VERIFY_NONE
-        s.post_connection_check(@address)
-      end
-      verified = true
-      s
-    ensure
-      s.close unless verified
-    end
-
-    def new_internet_message_io(s)
-      io = InternetMessageIO.new(s)
-      io.read_timeout = @read_timeout
-      io.debug_output = @debug_output
-      io
-    end
-
-    def do_helo(helo_domain)
-      res = @esmtp ? ehlo(helo_domain) : helo(helo_domain)
-      @capabilities = res.capabilities
-    rescue SMTPError
-      if @esmtp
-        @esmtp = false
-        @error_occurred = false
-        retry
-      end
-      raise
-    end
-
-    def do_finish
-      quit if @socket and not @socket.closed? and not @error_occurred
-    ensure
-      @started = false
-      @error_occurred = false
-      @socket.close if @socket and not @socket.closed?
-      @socket = nil
-    end
-
-    #
-    # Message Sending
-    #
-
-    public
-
-    #
-    # Sends +msgstr+ as a message.  Single CR ("\r") and LF ("\n") found
-    # in the +msgstr+, are converted into the CR LF pair.  You cannot send a
-    # binary message with this method. +msgstr+ should include both
-    # the message headers and body.
-    #
-    # +from_addr+ is a String representing the source mail address.
-    #
-    # +to_addr+ is a String or Strings or Array of Strings, representing
-    # the destination mail address or addresses.
-    #
-    # === Example
-    #
-    #     Net::SMTP.start('smtp.example.com') do |smtp|
-    #       smtp.send_message msgstr,
-    #                         'from@example.com',
-    #                         ['dest@example.com', 'dest2@example.com']
-    #     end
-    #
-    # === Errors
-    #
-    # This method may raise:
-    #
-    # * Net::SMTPServerBusy
-    # * Net::SMTPSyntaxError
-    # * Net::SMTPFatalError
-    # * Net::SMTPUnknownError
-    # * Net::ReadTimeout
-    # * IOError
-    #
-    def send_message(msgstr, from_addr, *to_addrs)
-      raise IOError, 'closed session' unless @socket
-      mailfrom from_addr
-      rcptto_list(to_addrs) {data msgstr}
-    end
-
-    alias send_mail send_message
-    alias sendmail send_message   # obsolete
-
-    #
-    # Opens a message writer stream and gives it to the block.
-    # The stream is valid only in the block, and has these methods:
-    #
-    # puts(str = '')::       outputs STR and CR LF.
-    # print(str)::           outputs STR.
-    # printf(fmt, *args)::   outputs sprintf(fmt,*args).
-    # write(str)::           outputs STR and returns the length of written bytes.
-    # <<(str)::              outputs STR and returns self.
-    #
-    # If a single CR ("\r") or LF ("\n") is found in the message,
-    # it is converted to the CR LF pair.  You cannot send a binary
-    # message with this method.
-    #
-    # === Parameters
-    #
-    # +from_addr+ is a String representing the source mail address.
-    #
-    # +to_addr+ is a String or Strings or Array of Strings, representing
-    # the destination mail address or addresses.
-    #
-    # === Example
-    #
-    #     Net::SMTP.start('smtp.example.com', 25) do |smtp|
-    #       smtp.open_message_stream('from@example.com', ['dest@example.com']) do |f|
-    #         f.puts 'From: from@example.com'
-    #         f.puts 'To: dest@example.com'
-    #         f.puts 'Subject: test message'
-    #         f.puts
-    #         f.puts 'This is a test message.'
-    #       end
-    #     end
-    #
-    # === Errors
-    #
-    # This method may raise:
-    #
-    # * Net::SMTPServerBusy
-    # * Net::SMTPSyntaxError
-    # * Net::SMTPFatalError
-    # * Net::SMTPUnknownError
-    # * Net::ReadTimeout
-    # * IOError
-    #
-    def open_message_stream(from_addr, *to_addrs, &block)   # :yield: stream
-      raise IOError, 'closed session' unless @socket
-      mailfrom from_addr
-      rcptto_list(to_addrs) {data(&block)}
-    end
-
-    alias ready open_message_stream   # obsolete
-
-    #
-    # Authentication
-    #
-
-    public
-
-    DEFAULT_AUTH_TYPE = :plain
-
-    def authenticate(user, secret, authtype = DEFAULT_AUTH_TYPE)
-      check_auth_method authtype
-      check_auth_args user, secret
-      send auth_method(authtype), user, secret
-    end
-
-    def auth_plain(user, secret)
-      check_auth_args user, secret
-      res = critical {
-        get_response('AUTH PLAIN ' + base64_encode("\0#{user}\0#{secret}"))
-      }
-      check_auth_response res
-      res
-    end
-
-    def auth_login(user, secret)
-      check_auth_args user, secret
-      res = critical {
-        check_auth_continue get_response('AUTH LOGIN')
-        check_auth_continue get_response(base64_encode(user))
-        get_response(base64_encode(secret))
-      }
-      check_auth_response res
-      res
-    end
-
-    def auth_cram_md5(user, secret)
-      check_auth_args user, secret
-      res = critical {
-        res0 = get_response('AUTH CRAM-MD5')
-        check_auth_continue res0
-        crammed = cram_md5_response(secret, res0.cram_md5_challenge)
-        get_response(base64_encode("#{user} #{crammed}"))
-      }
-      check_auth_response res
-      res
-    end
-
-    private
-
-    def check_auth_method(type)
-      unless respond_to?(auth_method(type), true)
-        raise ArgumentError, "wrong authentication type #{type}"
-      end
-    end
-
-    def auth_method(type)
-      "auth_#{type.to_s.downcase}".intern
-    end
-
-    def check_auth_args(user, secret, authtype = DEFAULT_AUTH_TYPE)
-      unless user
-        raise ArgumentError, 'SMTP-AUTH requested but missing user name'
-      end
-      unless secret
-        raise ArgumentError, 'SMTP-AUTH requested but missing secret phrase'
-      end
-    end
-
-    def base64_encode(str)
-      # expects "str" may not become too long
-      [str].pack('m').gsub(/\s+/, '')
-    end
-
-    IMASK = 0x36
-    OMASK = 0x5c
-
-    # CRAM-MD5: [RFC2195]
-    def cram_md5_response(secret, challenge)
-      tmp = Digest::MD5.digest(cram_secret(secret, IMASK) + challenge)
-      Digest::MD5.hexdigest(cram_secret(secret, OMASK) + tmp)
-    end
-
-    CRAM_BUFSIZE = 64
-
-    def cram_secret(secret, mask)
-      secret = Digest::MD5.digest(secret) if secret.size > CRAM_BUFSIZE
-      buf = secret.ljust(CRAM_BUFSIZE, "\0")
-      0.upto(buf.size - 1) do |i|
-        buf[i] = (buf[i].ord ^ mask).chr
-      end
-      buf
-    end
-
-    #
-    # SMTP command dispatcher
-    #
-
-    public
-
-    # Aborts the current mail transaction
-
-    def rset
-      getok('RSET')
-    end
-
-    def starttls
-      getok('STARTTLS')
-    end
-
-    def helo(domain)
-      getok("HELO #{domain}")
-    end
-
-    def ehlo(domain)
-      getok("EHLO #{domain}")
-    end
-
-    def mailfrom(from_addr)
-      if $SAFE > 0
-        raise SecurityError, 'tainted from_addr' if from_addr.tainted?
-      end
-      getok("MAIL FROM:<#{from_addr}>")
-    end
-
-    def rcptto_list(to_addrs)
-      raise ArgumentError, 'mail destination not given' if to_addrs.empty?
-      ok_users = []
-      unknown_users = []
-      to_addrs.flatten.each do |addr|
-        begin
-          rcptto addr
-        rescue SMTPAuthenticationError
-          unknown_users << addr.dump
-        else
-          ok_users << addr
-        end
-      end
-      raise ArgumentError, 'mail destination not given' if ok_users.empty?
-      ret = yield
-      unless unknown_users.empty?
-        raise SMTPAuthenticationError, "failed to deliver for #{unknown_users.join(', ')}"
-      end
-      ret
-    end
-
-    def rcptto(to_addr)
-      if $SAFE > 0
-        raise SecurityError, 'tainted to_addr' if to_addr.tainted?
-      end
-      getok("RCPT TO:<#{to_addr}>")
-    end
-
-    # This method sends a message.
-    # If +msgstr+ is given, sends it as a message.
-    # If block is given, yield a message writer stream.
-    # You must write message before the block is closed.
-    #
-    #   # Example 1 (by string)
-    #   smtp.data(<<EndMessage)
-    #   From: john@example.com
-    #   To: betty@example.com
-    #   Subject: I found a bug
-    #
-    #   Check vm.c:58879.
-    #   EndMessage
-    #
-    #   # Example 2 (by block)
-    #   smtp.data {|f|
-    #     f.puts "From: john@example.com"
-    #     f.puts "To: betty@example.com"
-    #     f.puts "Subject: I found a bug"
-    #     f.puts ""
-    #     f.puts "Check vm.c:58879."
-    #   }
-    #
-    def data(msgstr = nil, &block)   #:yield: stream
-      if msgstr and block
-        raise ArgumentError, "message and block are exclusive"
-      end
-      unless msgstr or block
-        raise ArgumentError, "message or block is required"
-      end
-      res = critical {
-        check_continue get_response('DATA')
-        socket_sync_bak = @socket.io.sync
-        begin
-          @socket.io.sync = false
-          if msgstr
-            @socket.write_message msgstr
-          else
-            @socket.write_message_by_block(&block)
-          end
-        ensure
-          @socket.io.flush
-          @socket.io.sync = socket_sync_bak
-        end
-        recv_response()
-      }
-      check_response res
-      res
-    end
-
-    def quit
-      getok('QUIT')
-    end
-
-    private
-
-    def getok(reqline)
-      res = critical {
-        @socket.writeline reqline
-        recv_response()
-      }
-      check_response res
-      res
-    end
-
-    def get_response(reqline)
-      @socket.writeline reqline
-      recv_response()
-    end
-
-    def recv_response
-      buf = ''
-      while true
-        line = @socket.readline
-        buf << line << "\n"
-        break unless line[3,1] == '-'   # "210-PIPELINING"
-      end
-      Response.parse(buf)
-    end
-
-    def critical
-      return Response.parse('200 dummy reply code') if @error_occurred
-      begin
-        return yield()
-      rescue Exception
-        @error_occurred = true
-        raise
-      end
-    end
-
-    def check_response(res)
-      unless res.success?
-        raise res.exception_class, res.message
-      end
-    end
-
-    def check_continue(res)
-      unless res.continue?
-        raise SMTPUnknownError, "could not get 3xx (#{res.status}: #{res.string})"
-      end
-    end
-
-    def check_auth_response(res)
-      unless res.success?
-        raise SMTPAuthenticationError, res.message
-      end
-    end
-
-    def check_auth_continue(res)
-      unless res.continue?
-        raise res.exception_class, res.message
-      end
-    end
-
-    # This class represents a response received by the SMTP server. Instances
-    # of this class are created by the SMTP class; they should not be directly
-    # created by the user. For more information on SMTP responses, view
-    # {Section 4.2 of RFC 5321}[http://tools.ietf.org/html/rfc5321#section-4.2]
-    class Response
-      # Parses the received response and separates the reply code and the human
-      # readable reply text
-      def self.parse(str)
-        new(str[0,3], str)
-      end
-
-      # Creates a new instance of the Response class and sets the status and
-      # string attributes
-      def initialize(status, string)
-        @status = status
-        @string = string
-      end
-
-      # The three digit reply code of the SMTP response
-      attr_reader :status
-
-      # The human readable reply text of the SMTP response
-      attr_reader :string
-
-      # Takes the first digit of the reply code to determine the status type
-      def status_type_char
-        @status[0, 1]
-      end
-
-      # Determines whether the response received was a Positive Completion
-      # reply (2xx reply code)
-      def success?
-        status_type_char() == '2'
-      end
-
-      # Determines whether the response received was a Positive Intermediate
-      # reply (3xx reply code)
-      def continue?
-        status_type_char() == '3'
-      end
-
-      # The first line of the human readable reply text
-      def message
-        @string.lines.first
-      end
-
-      # Creates a CRAM-MD5 challenge. You can view more information on CRAM-MD5
-      # on Wikipedia: http://en.wikipedia.org/wiki/CRAM-MD5
-      def cram_md5_challenge
-        @string.split(/ /)[1].unpack('m')[0]
-      end
-
-      # Returns a hash of the human readable reply text in the response if it
-      # is multiple lines. It does not return the first line. The key of the
-      # hash is the first word the value of the hash is an array with each word
-      # thereafter being a value in the array
-      def capabilities
-        return {} unless @string[3, 1] == '-'
-        h = {}
-        @string.lines.drop(1).each do |line|
-          k, *v = line[4..-1].chomp.split
-          h[k] = v
-        end
-        h
-      end
-
-      # Determines whether there was an error and raises the appropriate error
-      # based on the reply code of the response
-      def exception_class
-        case @status
-        when /\A4/  then SMTPServerBusy
-        when /\A50/ then SMTPSyntaxError
-        when /\A53/ then SMTPAuthenticationError
-        when /\A5/  then SMTPFatalError
-        else             SMTPUnknownError
-        end
-      end
-    end
-
-    def logging(msg)
-      @debug_output << msg + "\n" if @debug_output
-    end
-
-  end   # class SMTP
-
-  SMTPSession = SMTP # :nodoc:
-
-end